Efficient photocatalytic inactivation of Microcystis aeruginosa via self-floating Ag3VO4/BiVO4 hydrogel under visible light

High-efficiency removal of microcystis aeruginosa using Z-scheme AgBr/NH2-MIL-125(Ti) photocatalyst with superior visible-light absorption: Performance insights and mechanisms

Algal blooms have become a widespread concern for drinking water production, threatening ecosystems and human health. Photocatalysis, a promising advanced oxidation process (AOP) technology for wastewater treatment, is considered a potential measure for in situ remediation of algal blooms. However, conventional photocatalysts often suffer from limited visible-light response and rapid recombination of photogenerated electron-hole pairs. In this study, we prepared a Z-scheme AgBr/NH2-MIL-125(Ti) composite with excellent visible light absorption performance using co-precipitation to efficiently inactivate Microcystis aeruginosa. The degradation efficiency of AgBr/NH2-MIL-125(Ti) for chlorophyll a was 98.7 % after 180 min of visible light irradiation, significantly surpassing the degradation rate efficiency of AgBr and NH2-MIL-125(Ti) by factors of 3.20 and 36.75, respectively. Moreover, the removal rate was maintained at 91.1 % even after five times of repeated use. The experimental results indicated that superoxide radicals (•O2-) were the dominant reactive oxygen species involved. The photocatalytic reaction altered the morphology and surface charge of algal cells, inhibited their metabolism, and disrupted their photosynthetic and antioxidant systems. In conclusion, this study presents a promising material for the application of photocatalytic technology in algal bloom remediation.

Construction of floating photothermal-assisted S-scheme heterojunction with enhanced photocatalytic degradation of tetracycline: Insights into mechanisms, degradation pathways and toxicity assessment

Inspired by ecological floating beds to treat water pollution through photosynthesis, we employed a combination of calcination and hydrothermal methods to construct a photothermal-assisted photocatalysis system based on a floating monolithic porous mesh of g-C3N4 (MPMCN) loaded with the excellent photothermal material Bi2MoO6 (BMO), forming a BMO/MPMCN S-scheme heterojunction. This approach improved the utilization efficiency of solar light by BMO/MPMCN, minimized heat loss, and enhanced the overall temperature of the material during the reaction process, thereby accelerating interfacial electron transfer. The unique floating structure confers a larger specific surface area to BMO/MPMCN, providing more reaction sites for TC pollutants and efficiently removing TC contamination from water. BMO/MPMCN degradated 99.3% of TC after 90 min of photothermal reaction, and exhibited good recyclability and reusability. Structural and performance characterizations of the material were carried out using techniques such as XRD, TEM, electrochemical testing, and ESR. Furthermore, the corresponding band structure and S-scheme electron transfer mechanism of the BMO/MPMCN heterojunction were deduced through the combination of in-situ XPS and UPS. The possible degradation pathways of TC and the ecological toxicity changes of intermediate products were analyzed. Finally, a mechanistic model for the photothermal-assisted photocatalytic degradation of TC in water by the BMO/MPMCN S-scheme heterojunction was established, providing a novel approach for the practical application of photocatalysis technology.

Reliable assessment and prediction of moderate preoxidation of sodium hypochlorite for algae-laden water treatment

Chemical moderate preoxidation for algae-laden water is an economical and prospective strategy for controlling algae and exogenous pollutants, whereas it is constrained by a lack of effective on-line evaluation and quick-response feedback method. Herein, excitation-emission matrix parallel factor analysis (EEM-PARAFAC) was used to identify cyanobacteria fluorophores after preoxidation of sodium hypochlorite (NaClO) at Excitation/Emission wavelength of 260(360)/450 nm, based on which the algal cell integrity and intracellular organic matter (IOM) release were quantitatively assessed. Machine learning modeling of fluorescence spectral data for prediction of moderate preoxidation using NaClO was established. The optimal NaClO dosage for moderate preoxidation depended on algal density, growth phases, and organic matter concentrations in source water matrices. Low doses of NaClO (<0.5 mg/L) led to short-term desorption of surface-adsorbed organic matter (S-AOM) without compromising algal cell integrity, whereas high doses of NaClO (≥0.5 mg/L) quickly caused cell damage. The optimal NaClO dosage increased from 0.2-0.3 mg/L to 0.9-1.2 mg/L, corresponding to the source water with algal densities from 0.1 × 10⁶ to 2.0 × 10⁶ cells/mL. Different growth stages required varying NaClO doses: stationary phase cells needed 0.3-0.5 mg/L, log phase cells 0.6-0.8 mg/L, and decaying cells 2.0-2.5 mg/L. The presence of natural organic matter and S-AOM increased the NaClO dosage limit with higher dissolved organic carbon (DOC) concentrations (1.00 mg/L DOC required 0.8-1.0 mg/L NaClO, while 2.20 mg/L DOC required 1.5-2.0 mg/L). Compared to other predictive models, the machine learning model (Gaussian process regression-Matern (0.5)) performed best, achieving R2 values of 1.000 and 0.976 in training and testing sets. Optimal preoxidation followed by coagulation effectively removed algal contaminants, achieving 91%, 92%, and 92% removal for algal cells, turbidity, and chlorophyll-a, respectively, thereby demonstrating the effectiveness of moderate preoxidation. This study introduces a novel approach to dynamically adjust NaClO dosage by monitoring source water qualities and tracking post-preoxidation fluorophores, enhancing moderate preoxidation technology application in algae-laden water treatment.

Development and testing of alginate/C3N4porphyrin bead as a self-initiated Fenton photocatalyst for highly efficient atrazine removal

Fenton reaction has been widely used for efficient treatment of organic wastewater. However, its applications are limited by such key factors as pH < 3. In this study, we developed, tested, and optimized an alginate/C3N4porphyrin bead (C3N4por-SA) as a recyclable photocatalyst in a photocatalysis-self-Fenton process to overcome these limitations. Porphyrin-modified C3N4 (C3N4por) was used as the H2O2 donator, while Fe(III) nodes served as the Fenton reagent. The as-prepared floating alginate/C3N4por bead utilized the light source as a driving force for the catalysis. Under visible light irradiation for 6 h, the model pollutant atrazine was degraded by 70.96 % by the optimized photocatalyst (named as C3N4por-SA-Fe1Ca5), demonstrating better photocatalytic performance than alginate/C3N4 beads. This improvement was attributed to the higher H2O2 yield from C3N4por. The alginate/C3N4por bead showed better photocatalytic activity even after several consecutive cycles and could easily be recovered for reuse. Furthermore, Fe(III)/Ca(II) bimetallic alginate bead exhibited better photocatalytic activity and a higher content of •OH radicals than the Ca(II) monometallic alginate beads, due to the ability of Fe(III) nodes to serve as a Fenton reagent. The influences of light sources, and commonly existing matters (namely SO42-, Cl-, CO32-, NO3-, and humic acid) were investigated. Moreover, the alginate/C3N4por bead demonstrated good photocatalytic performance in a simulated natural environment without the addition of extra H2O2, with an atrazine removal percentage of up to 96.3 % after 3-h irradiation. These findings indicated the great potential of alginate/C3N4por bead in practical applications.

Recent advances in visible light driven inactivation of bloom forming blue-green algae using novel nano-composites: Mechanism, efficiency and fabrication approaches

Over the years, algae have proved to be a water pollutant due to global warming, climate change, and the unregulated addition of organic compounds in water bodies from diffused resources. Harmful algal blooms (HABs) are severely affecting the health of humans and aquatic ecosystems. Among available anti-blooming technologies, semiconductor photocatalysis has come forth as an effective alternative. In the recent past, literature has been modified extensively with a decisive knowledge regarding algal invasion, desired preparation of nanomaterials with enhanced visible light absorption capacity and mechanisms for algal cell denaturation. The motivation behind this review article was to gather algal inactivation data in a systematic way based on various research studies, including the construction of nanoparticles and purposely to test their anti-algal activities under visible irradiation. Additionally, this article mentions variety of starting materials employed for preparation of various nano-powders with focus on their synthesis routes, analytical techniques as well as proposed mechanisms for lost cellular integrity in context of reduced chlorophyll' a' level, cell rapture, cell leakage and damages to other physiological constituents; credited to oxidative damage initiated by reactive oxidation species (ROS). Various floating and recyclable composited catalysts Ag2CO3-N: GO, Ag/AgCl@ZIF-8, Ag2CrO4-g-C3N4-TiO2/mEP proved to be game-changers owing to their enhanced VL absorption, adsorption, stability, separation and reusability. An outlook for the generalized limitations of published reports, cost estimations for practical implementation, issues and challenges faced by nano-photocatalysts and possible opportunities for future studies are also proposed. This review will be able to provide vast insights for coherent fabrication of catalysts, breakthroughs in experimental methodologies and help in elaboration of damage mechanisms.

Floating photocatalysts as promising materials for environmental detoxification and energy production: A review

The oxygenation process of the catalyst surface, the incident-light harvesting capability, and facile recycling of utilized photocatalysts play key role in the outstanding photocatalytic performances. The typical existing photocatalysts in powder form have many drawbacks, such as difficult separation from the treated water, insufficient surface oxygenation, poor active surface area, low incident-light harvesting ability, and secondary pollution of the environment. A great number of scientific works introduced novel and fresh ideas related to designing floating photocatalytic systems by immobilizing highly active photocatalysts onto a floatable substrate. Thanks to direct contact with the illuminated light and oxygen molecules in the interface of water/air, the photocatalytic performance is maximized through production of more reactive species, employed in the photocatalytic reactions. Furthermore, facile recovering of the utilized photocatalysts for next processes avoids secondary pollution as well as diminishes the process's price. This review highlights the performance of developed floating photocatalysts for diverse applications. Furthermore, different floating substrates and possible mechanisms in floating photocatalysts are briefly mentioned. In addition, several emerging self-floating photocatalytic systems are taken attention and discussed. Specially, coupling photo-thermal and photocatalytic effects seems to be a good strategy for introducing a new class of floating photocatalyst to utilize the free, abundant, and green sunlight energy for the aims of water desalination and purification. Despite of a large number of attempts about the floating photocatalysts, there are still plenty of rooms for more in-depth research to be carried out for attaining the required characteristics of the large scale utilizations of these materials.

Recent progress and prospect of graphitic carbon nitride-based photocatalytic materials for inactivation of Microcystis aeruginosa

The proliferation of harmful algal blooms is a global concern due to the risk they pose to the environment and human health. Algal toxins which are hazardous compounds produced by dangerous algae, can potentially kill humans. Researchers have been drawn to photocatalysis because of its clean and energy-saving properties. Graphite carbon nitride (g-C3N4) photocatalysts have been extensively studied for their ability to eliminate algae. These photocatalysts have attracted notice because of their cost-effectiveness, appropriate electronic structure, and exceptional chemical stability. This paper reviews the progress of photocatalytic inactivation of harmful algae by g-C3N4-based materials in recent years. A brief overview is given of a number of the modification techniques on g-C3N4-based photocatalytic materials, as well as the process of inactivating algal cells and destroying their toxins. Additionally, it provides a theoretical framework for future research on the eradication of algae using g-C3N4-based photocatalytic materials.

"Needle" hidden in silk floss: Inactivation effect and mechanism of melamine sponge loaded bismuth oxide composite copper-metal organic framework (MS/Bi2O3@Cu-MOF) as floating photocatalyst on Microcystis aeruginosa

Photocatalytic technology showed significant potential for addressing the issue of cyanobacterial blooms resulting from eutrophication in bodies of water. However, the traditional powder materials were easy to agglomerate and settle, which led to the decrease of photocatalytic activity. The emergence of floating photocatalyst was important for the practical application of controlling harmful algal blooms. This study was based on the efficient powder photocatalyst bismuth oxide composite copper-metal organic framework (Bi2O3 @Cu-MOF), which was successfully loaded onto melamine sponge (MS) by sodium alginate immobilization to prepare a floating photocatalyst MS/Bi2O3 @Cu-MOF for the inactivation of Microcystis aeruginosa (M. aeruginosa) under visible light. When the capacity was 0.4 g (CA0.4), MS/Bi2O3 @Cu-MOF showed good photocatalytic activity, and the inactivation rate of M. aeruginosa reached 74.462% after 120 h. MS/Bi2O3 @Cu-MOF-CA0.4 showed a large specific surface area of 30.490 m2/g and an average pore size of 22.862 nm, belonging to mesoporous materials. After 120 h of treatment, the content of soluble protein in the MS/Bi2O3 @Cu-MOF-CA0.4 treatment group decreased to 0.365 mg/L, the content of chlorophyll a (chla) was 0.023 mg/L, the content of malondialdehyde (MDA) increased to 3.168 nmol/mgprot, and the contents of various antioxidant enzymes experienced drastic changes, first increasing and then decreasing. The photocatalytic process generated·OH and·O2-, which played key role in inactivating the algae cells. Additionally, the release of Cu2+ and adsorption of the material also contributed to the process.

E-beam irradiation-induced synthesis of hydroxyethyl cellulose/(Cu2O-rGO)/BiVO4-based nanocomposite for photocatalytic remediation of wastewater under visible light

Using E-beam irradiation as an eco-friendly technique for initiation and crosslinking, a series of Hydroxyethyl Cellulose-poly vinyl alcohol copolymer hydrogels were synthesized as templates for cuprous oxide (Cu2O), reduced graphene oxide (rGO) and bismuth vanadate (BiVO4) nanoparticles to be used as nanocomposites photocatalysts for methylene blue (MB) dye decolorization using visible light. Preparation conditions were optimized to ensure the construction of a good network architecture and therefore the highest gelation degree. For the preparation of (Cu2O@rGO)/BiVO4 nanocomposites, a series of rGO was decorated by Cu2O using the precipitation method, followed by mixing with BiVO4 which was synthesized hydrothermally. (EDX), (XRD), (TEM), and (SEM) were used for nanoparticle characterization. The thermal characteristics of the fabricated nanocomposites were evaluated using thermal gravimetric analysis. The presence of rGO enhanced the decolorization efficiency of MB about 20 % higher than that of (HEC-PVA)/Cu2O which achieves only (59 %) decolorization efficiency. After the addition of BiVO4 NPs, the decolorization efficiency increased to reach 90 % after 150 min at pH 11 using a 10 ppm MB solution. The developed (HEC-PVA)/(Cu2O@rGO)/BiVO4 photocatalyst exhibits efficient reusability for 5 cycles. Treated dyed water shows a germination index (GI) of 82 % suggesting its suitability for irrigation of playgrounds and gardens.

Ferric-ellagate complex: A promising multifunctional photocatalyst

The semiconductors have exhibited great potential in the field of photocatalytic energy production, environmental remediation and bactericidal. Nevertheless, those inorganic semiconductors are still restricted in commercial application due to the drawbacks of easy agglomeration and low solar energy conversion efficiency. Herein, ellagic acid (EA) based metal-organic complexes (MOCs) were synthesized through a facile stirring process at room temperature with Fe³⁺, Bi³⁺ and Ce³⁺ as the metal center. The EA-Fe photocatalyst exhibited superior photocatalytic activity toward Cr(VI) reduction, where Cr(VI) were completely removed within 20 min. Meanwhile, EA-Fe also displayed good photocatalytic degradation of organic contaminants and photocatalytic bactericidal performance. The photodegradation rates of TC and RhB by EA-Fe were 15 and 5 times that by bare EA, respectively. Moreover, EA-Fe was capable of effectively eliminating both E. coli and S. aureus bacteria. It was found that EA-Fe was capable of generating superoxide radicals, which could participate in the reduction of heavy metals, degradation of organic contaminants and inactivation of bacteria. A photocatalysis-self-Fenton system could be established by EA-Fe solely. This work would provide a new insight for designing multifunctional MOCs with high photocatalytic efficiency.

A comprehensive review on the photocatalytic inactivation of Microcystis aeruginosa: Performance, development, and mechanisms

Harmful algae blooms (HABs), caused by severe eutrophication and extreme weather, have spread all over the world, posing adverse effects on eco-environment and human health. Microcystis aeruginosa is the dominant harmful cyanobacterial species when HABs occur, and the toxic metabolites produced by it, microcystins, are even fatal to humans. Photocatalytic technology has received wide attention from researchers for its clean and energy-efficient features, while the basic mechanisms and modification methods of photocatalysts have also been widely reported. In recent years, photocatalytic technology has shown great promise in the inhibition of HABs. In this article, we systematically reviewed the progress in photocatalytic performance and algae removal efficiency, discuss the damage mechanisms of photocatalysts for algae removal, including physical damage and various oxidative stresses, and also explore the degradation rates and possible pathways of microcystins. It can be concluded that during the photocatalytic process, the cytoarchitectural integrity of algae cells was damaged, a variety of important protein and enzyme systems were disrupted, and the antioxidant systems collapsed due to the continuous attack of ROS, which adversely affected the normal physiological activities and growth, resulting in the inactivation of algae cells. Moreover, photocatalysts have a degrading effect on microcystins, thus reducing the adverse effects of HAB. Finally, a brief summary of future research priorities regarding the photocatalytic degradation of algae cells is presented. This study helps to enhance the understanding of the destruction mechanism of Microcystis aeruginosa during the photocatalytic process, and provides a reference for the photodegradation of HAB in water bodies.

Efficient Microcystis aeruginosa coagulation and removal by palladium clusters doped g-C3N4 with no light irradiation

Efficient treatment of cyanobacterial blooms in eutrophication waters by safe and reliable nanomaterials is a big challenge for reducing environmental health risks. Herein, a novel strategy combining palladium clusters (Pd_n) with g-C₃N₄ nanocomposite was presented to achieve high-efficient removal of Microcystis aeruginosa cells through coagulation and breakage. Interestingly, 95.17% of algal cells (initial concentration of 5.6 × 10⁶ cells mL^-1) were promptly removed in the Pd/g-C₃N₄ (5%) system within only 10 min and without visible light irradiation and persulfate activation. Both the release of potassium ion and microcystin during the removal process and the transmission electron microscope observations of Microcystis aeruginosa cells proved that the integrity of the algal cell membrane was destroyed. The removal of Microcystin-LR (MC-LR) were further confirmed in the next process. Pd metal interaction and breakage against algal cells may cause disruption of algal cells. This study describes a novel technology for the superfast removal of harmful algae and may provide a new insight into the control of cyanobacterial blooms in practical applications.