Determination of chloramphenicol, thiamphenicol and florfenicol in milk and honey using modified QuEChERS extraction coupled with polymeric monolith-based capillary liquid chromatography tandem mass spectrometry

A novel electrochemical aptasensor based on eco-friendly synthesized titanium dioxide nanosheets and polyethyleneimine grafted reduced graphene oxide for ultrasensitive and selective detection of ciprofloxacin

Developing a rapid, sensitive, and efficient analytical method for the trace-level determination of highly concerning antibiotic ciprofloxacin (CIP) is desirable to guarantee the safety of human health and ecosystems. In this work, a novel electrochemical aptasensor based on polyethyleneimine grafted reduced graphene oxide and titanium dioxide (rGO/PEI/TiO2) nanocomposite was constructed for ultrasensitive and selective detection of CIP. Through the in-situ electrochemical oxidation of Ti3C2Tx nanosheets, TiO2 nanosheets with good electrochemical response were prepared in a more convenient and eco-friendly method. The prepared TiO2 nanosheets promote charge transferring on electrode interface, and [Fe(CN)6]3-/4- as electrochemical active substance can be electrostatically attracted by rGO/PEI. Thus, electrochemical detection signal of the aptasensor variates a lot after specific binding with CIP, achieving working dynamic range of 0.003-10.0 μmol L-1, low detection limit down to 0.7 nmol L-1 (S/N = 3) and selectivity towards other antibiotics. Additionally, the aptasensor exhibited good agreement with HPLC method at 95% confidence level, and achieved good recoveries (96.8-106.3%) in real water samples, demonstrating its suitable applicability of trace detection of CIP in aquatic environment.

Simultaneous Dual-Sensing Platform Based on Aptamer-Functionalized DNA Hydrogels for Visual and Fluorescence Detection of Chloramphenicol and Aflatoxin M1

In this study, a chloramphenicol and aflatoxin M1 aptamer-functionalized DNA hydrogel was designed for the simultaneous detection of chloramphenicol and aflatoxin M1 for the first time. The acrydite-modified chloramphenicol aptamer sequence was used to synthesize the DNA hydrogel and for visual detection of chloramphenicol depending on the gel-to-sol transition of the target-responsive DNA hydrogel. The DNA hydrogel formulation was set as follows: 60% of each linear polyacrylamide-DNA conjugate and 40% of acrylamide and chloramphenicol aptamer/DNA strand-1 at a molar ratio of 1:1, and the lowest concentration of chloramphenicol leading to gel dissociation was 1.0 nM at 25 °C. Furthermore, the formalized aptamer-functionalized DNA hydrogel was used to detect aflatoxin M1 by measuring the recovery of the fluorescence signal that was quenched when the FAM-labeled aflatoxin M1 aptamer and BHQ1-labeled DNA strand-2 were hybridized to form a double-stranded DNA in the network of hydrogel. The detection platform was successfully applied to the detection of chloramphenicol and aflatoxin M1, both in aqueous solution and in milk. The aptamer-functionalized DNA hydrogel had detection (LOD) and quantification limits (LOQ) for aflatoxin M1 as 1.7 and 5.2 nM, respectively. Using two aptamer sequences with high affinity and specificity, the dual-sensing platform based on the DNA hydrogel achieved higher selectivity for chloramphenicol and aflatoxin M1, which demonstrated its potential as a reliable simultaneous detection platform against two different targets for monitoring food safety.

An Imine-Based Porous 3D Covalent Organic Polymer as a New Sorbent for the Solid-Phase Extraction of Amphenicols from Water Sample

In this paper, an imine-based porous 3D covalent organic polymer (COP) was synthesized via solvothermal condensation. The structure of the 3D COP was fully characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and powder X-ray diffractometry, thermogravimetric analysis, and Brunauer-Emmer-Teller (BET) nitrogen adsorption. This porous 3D COP was used as a new sorbent for the solid-phase extraction (SPE) of amphenicol drugs, including chloramphenicol (CAP), thiamphenicol (TAP), and florfenicol (FF) in aqueous solution. Factors were investigated for their effects on the SPE efficiency, including the types and volume of eluent, washing speed, pH, and salinity of water. Under the optimized conditions, this method gave a wide linear range (0.1-200 ng/mL) with a high correlation coefficient value (R² > 0.99), low limits of detection (LODs, 0.01-0.03 ng/mL), and low limits of quantification (LOQs, 0.04-0.10 ng/mL). The recoveries ranged from 83.98% to 110.7% with RSDs ≤ 7.02%. The good enrichment performance for this porous 3D COP might contribute to the hydrophobic and π-π interactions, the size-matching effect, hydrogen bonding, and the good chemical stability of 3D COP. This 3D COP-SPE method provides a promising approach to selectively extract trace amounts of CAP, TAP, and FF in environmental water samples in ng quantities.

Magnetic nanofluid based on green deep eutectic solvent for enrichment and determination of chloramphenicol in milk and chicken samples by high-performance liquid chromatography-ultraviolet: Optimization of microextraction

In this work, magnetic nanofluid based on a deep eutectic solvent that constricts through a simple and easy route, and subsequently applied for the preconcentration and microextraction of chloramphenicol (CAP) as a hazardous drug from milk and chicken samples via syringe-to-syringe microextraction prior to its determination by high-performance liquid chromatography-ultraviolet (HPLC-UV). In addition, the optimum conditions of effective factors were searched by the central composite design (CCD), and subsequently, at their optimum value, the figures of merit were evaluated. Also, the suggested method illustrated a low limit of detection (0.2 ng mL^-1), a low limit of quantitation (0.67 ng mL^-1), and a good linear range with an R² of 0.996. The CAP relative recoveries in milk and chicken samples were 90.3%-95.1%, with relative standard deviations lower than 4.2%. The current enhancement technique is simple, easy, and rapid, which makes it suitable for quantification of CAP by HPLC-UV at trace levels in complicated materials with reliable and reproducible results.

Functionalized monolithic columns: Recent advancements and their applications for high-efficiency separation and enrichment in food and medicine

The chromatographic column is the core of a high-performance liquid chromatography (HPLC) system, and must have excellent separation efficiency and selectivity. Therefore, functional modification materials for monolithic columns have been rapidly developed. This study is a systematic review of the recently reported functionalized monolithic columns. In particular, the study reviews the types of functional monomers under different modification conditions, as well as the separation and detection techniques combined with chromatography, and their development prospects. In addition, the applications of functionalized monolithic columns in food analysis, biomedicine, and the analysis of active ingredient of Chinese herbal medicines in recent years are also discussed. Also reviewed are the functionalized monolithic columns for qualitative and quantitative analysis. It provided a reference for further development and application of organic polymer monolithic columns.

MRM3-based UHPLC-MS/MS method for quantitation of total florfenicol residue content in milk and withdrawal study profile of milk from treated cows

Florfenicol is a broad spectrum antibacterial, licensed globally for treatment of animal and aquaculture diseases. In the EU, Canada and US it is not permitted for use in animals producing milk or eggs. There are no published methods for analysis of total florfenicol content in milk/milk products as these lack a hydrolysis step, failing to meet the marker residue definition. A method for determining total florfenicol content in milk that meets this definition is reported for the first time. Use of a UHPLC-MS/MS multiple reaction monitoring-cubed method improved the selective detection and quantitation of lower levels of florfenicol amine in milk compared to MRM only. Single laboratory validation data and withdrawal profile in bovine milk are presented. A withdrawal period of over 50 days is indicated in case of off-label use. Requirement for hydrolysis is demonstrated.

ProFlow nano-liquid chromatography with a graphene oxide-functionalized monolithic nano-column for the simultaneous determination of chloramphenicol and chloramphenicol glucuronide in foods

Chloramphenicol (CAP) is an effective antibiotic with broad spectrum against gram-positive and gram-negative bacteria, while it is used to treat various infections in animals. Although CAP is banned for usage in the livestock products including, milk, honey, seafood, and royal jelly, CAP is still often detected in foods of animal origin, posing a threat to consumer health. The use of CAP is restricted in many countries due to its side effect in human metabolic process according to the Expert Committee on Food Additives (ECFA) recommendation. Chloramphenicol glucuronide (CAPG) is also a metabolic product of CAP, which may be a hazardous chemical for human health. Therefore, the development of sensitive separation and quantification method is an important issue, especially for food safety. Herein, we reported the preparation and application of a monolithic nano-column for CAP and CAPG analyses in foods by ProFlow Nano liquid chromatography (ProFlow Nano LC). The monolithic nano-column was prepared by an in situ polymerization using 3-chloro-2-hydroxypropylmethacrylate (HPMA-Cl) and ethylene dimethacrylate (EDMA) and followed graphene oxide (GO) modification. After characterization, the monolithic nano-column was used for the analysis of CAP and CAPG in honey and milk samples by ProFlow Nano LC. The whole method was validated in terms of linearity, sensitivity, precision, recovery, and repeatability, while it led to obtain high sensitivity with limit of quantification was found as 0.02 µg/kg for CAP. Limit of quantification for CAPG was found as 0.08 µg/kg. The developed method with monolithic nano-column was optimized to achieve very sensitive analyses of CAP and CAPG in the food samples. The applicability of the nano-column was successfully demonstrated by the analysis of CAP and CAPG in milk and honey samples. PRACTICAL APPLICATION: This article describes the preparation and application of a monolithic nano-column for the separation and determination of chloramphenicol and chloramphenicol glucuronide in food samples by ProFlow Nano LC. The use of new and advanced techniques is a crucial issue in the food science and technology. In this sense, this study demonstrated a new food analysis method using advanced instrumental technique with a homemade monolithic nano-column.

Simultaneous Determination of Amphenicols and Metabolites in Animal-Derived Foods Using Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry

Amphenicols are widely used to prevent and treat animal diseases. However, amphenicol residues accumulate in livestock and poultry and harm consumers. We hypothesized that one can combine solid-phase extraction (SPE) with ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) to simultaneously determine amphenicols and metabolites in pork, beef, lamb, chicken, and their products and meet government regulations for maximum residue limits. We extracted crude samples with ethyl acetate and ammonia water (98:2, v/v), purified the samples with a CNW Si SPE column, defatted the samples with acetonitrile-saturated n-hexane, and then determined the resulting analytes by UHPLC-MS/MS. The limit of detection of the analytes in livestock and poultry meat was 0.03–1.50 μg/kg, and the limit of quantification was 0.05–5.00 μg/kg. Measured chloramphenicol, thiamphenicol, and florfenicol concentrations were linear over the range 0.50–50 μg/kg; and the florfenicol amine concentration was linear over the range 5.00–200 μg/kg (all with correlation coefficients >0.9990). The recovery of the spiked samples was between 72% and 120%. The intraday relative standard deviation (RSD) ranged from 1% to 9%, and the interday RSD ranged from 1% to 12%. Based on the above results, the current method is sensitive, accurate, and reproducible with the detection limits being well below the maximum residue limits as per Chinese standard GB 31650-2019, and thus, our research hypothesis could be confirmed.

Molecularly imprinted polymers in toxicology: a literature survey for the last 5 years

The science of toxicology dates back almost to the beginning of human history. Toxic chemicals, which are encountered in different forms, are always among the chemicals that should be investigated in criminal field, environmental application, pharmaceutic, and even industry, where many researches have been carried out studies for years. Almost all of not only drugs but also industrial dyes have toxic side and direct effects. Environmental micropollutants accumulate in the tissues of all living things, especially plants, and show short- or long-term toxic symptoms. Chemicals in forensic science can be known by detecting the effect they cause to the body with the similar mechanism. It is clear that the best tracking tool among analysis methods is molecularly printed polymer-based analytical setups. Different polymeric combinations of molecularly imprinted polymers allow further study on detection or extraction using chromatographic and spectroscopic instruments. In particular, methods used in forensic medicine can detect trace amounts of poison or biological residues on the scene. Molecularly imprinted polymers are still in their infancy and have many variables that need to be developed. In this review, we summarized how molecular imprinted polymers and toxicology intersect and what has been done about molecular imprinted polymers in toxicology by looking at the studies conducted in the last 5 years.

Veterinary Drug Residues in Animal-Derived Foods: Sample Preparation and Analytical Methods

Veterinary drugs are used to treat livestock and aquatic diseases and thus are introduced into animal-derived foods, endangering consumer health and safety. Antibiotic resistance is rapidly becoming a major worldwide problem, and there has been a steady increase in the number of pathogens that show multi-drug resistance. Illegal and excessive use of veterinary drugs in animals and aquaculture has serious adverse effects on humans and on all other environmental organisms. It is necessary to develop simple extraction methods and fast analytical methods to effectively detect veterinary drug residues in animal-derived foods. This review summarizes the application of various sample extraction techniques and detection and quantification methods for veterinary drug residues reported in the last decade (2010-2020). This review compares the advantages and disadvantages of various extraction techniques and detection methods and describes advanced methods, such as those that use electrochemical biosensors, piezoelectric biosensors, optical biosensors, and molecularly imprinted polymer biosensors. Finally, the future prospects and trends related to extraction methods, detection methods and advanced methods for the analysis of veterinary drug residues in animal-derived foods are summarized.

Rapid Screening and Quantification of Multi-Class Multi-Residue Veterinary Drugs in Pork by a Modified Quechers Protocol Coupled to UPLC-QOrbitrap HRMS

Background:

A rapid and simple analytical method for the screening and quantification of multi-residues was established by a quick, easy, cheap, effective, rugged and safe (QuEChERS) approach coupled to ultra-performance liquid chromatography and electrospray ionization quadrupole orbitrap high-resolution mass spectrometry (UPLC-Q-Orbitrap HRMS). A total number of 59 veterinary drugs were investigated, which belonged to 12 classes, such as β-agonist, quinolones, sulfonamides, tetracyclines, lincomycin series, triphenylmethane, nitroimidazoles, macrolides, amide alcohols, quinoxalines, steroid hormone and sedatives.

Methods:

The factors which influence the determination of veterinary drugs residues, such as mobile phase, extract solvent, clean up sorbent, and re-dissolved solvent, were optimized by the single factor experiment. The method was sufficiently validated by using the parameters of linearity, sensitivity, accuracy, and repeatability.

Results:

The response of the detector was linear for 59 veterinary drug residues in extensive range (two to three orders of magnitude) with a high coefficient of determination (R2) (0.9995-0.9998). The limit of quantification (LOQ) ranged from 0.1μg/kg to 2.0μg/kg for 59 veterinary drug residues in pork samples. The repeatability was in the range of 1.0%-9.5%. Average recoveries of 59 veterinary drugs at three spiked levels ranged from 53.7%-117.8% with relative standard deviation (RSD) of 1.9%-13.9%. The full MS scan coupled with data-dependent MS/MS mode was applied for screening the target compounds to simultaneously obtain the accurate mass of parent ion and the mass spectrum of fragments. Elemental composition, accurate mass, and retention time and characteristic fragment ions were used to establish a homemade database.

Conclusion:

The ability of the homemade database was verified by analyzing the real pork samples, and the result was satisfactory.

Nano-liquid chromatography-mass spectrometry and recent applications in omics investigations

Liquid chromatography coupled to mass spectrometry (LC-MS) is one of the most powerful tools in identifying and quantitating molecular species. Decreasing column diameter from the millimeter to micrometer scale is now a well-developed method which allows for sample limited analysis. Specific fabrication of capillary columns is required for proper implementation and optimization when working in the nanoflow regime. Coupling the capillary column to the mass spectrometer for electrospray ionization (ESI) requires reduction of the subsequent emitter tip. Reduction of column diameter to capillary scale can produce improved chromatographic efficiency and the reduction of emitter tip size increased sensitivity of the electrospray process. This improved sensitivity and ionization efficiency is valuable in analysis of precious biological samples where analytes vary in size, ion affinity, and concentration. In this review we will discuss common approaches and challenges in implementing nLC-MS methods and how the advantages can be leveraged to investigate a wide range of biomolecules.

Screening method for the detection of residues of amphenicol antibiotics in bovine milk by optical biosensor

An immunobiosensor assay was developed for multi-residue screening in bovine milk of the parent amphenicols, thiamphenicol and florfenicol, along with the metabolite florfenicol amine. A polyclonal antibody raised in a rabbit after immunisation with a florfenicol amine-protein conjugate was employed in the assay. Milk samples were subjected to acetonitrile extraction, reconstituted in buffer and diluted prior to biosensor analysis. Validation data obtained from the analysis of fortified samples has shown that the method has a detection capability of less than 0.25 µg kg^-1 for florfenicol and less than 0.5 µg kg^-1 for florfenicol amine and thiamphenicol. The cross-reactivity profile and validation data for the detection of these amphenicols is presented together with results obtained following the analysis of florfenicol incurred samples using the developed screening method along with a comparison of results obtained from the analysis of the same incurred samples using an MRM³ UPLC-MS/MS confirmatory method. Results are also presented obtained from the analysis of samples from both treated and non-treated animals which were co-housed and which show the potential for cross-contamination.

Miniaturized liquid chromatography applied to the analysis of residues and contaminants in food: A review

The humankind is pretty dependent on food to control several biological processes into the organism. As the world population increases, the demand for foodstuffs follows the same trend claiming for a high food production situation. For this reason, a substantial amount of chemicals is used in agriculture and livestock husbandries every year, enhancing the likelihood of contaminated foodstuffs being commercialized. This outlook becomes a public health concern; thus, the governmental regulatory agencies impose laws to control the residues and contaminants in food matrices. Currently, one of the most important analytical techniques to perform it is LC. Despite its already recognized effectiveness, it is often time consuming and requires significant volumes of reagents, which are transformed into toxic waste. In this context, miniaturized LC modes emerge as a greener and more effective analytical technique. They have remarkable advantages, including higher sensitivity, lower sample amount, solvent and stationary phase requirements, and more natural coupling to MS. In this review, most of the critical characteristics of them are discussed, focusing on the benchtop instruments and their related analytical columns. Additionally, a discussion regarding the last 10 years of publications reporting miniaturized LC application for the analysis of natural and industrial food samples is categorized. The main chemical classes as applied in the crops are highlighted, including pesticides, veterinary drugs, and mycotoxins.

Quantification and Analysis of Trace Levels of Phenicols in Feed by Liquid Chromatography–Mass Spectrometry

A sensitive and reliable method using liquid chromatography–negative electrospray ionization mass spectrometry was developed for the simultaneous determination of chloramphenicol, florfenicol, and thiamphenicol at trace levels in animal feed. The analytes were extracted from grinded feed with ethyl acetate. Further the ethyl acetate was evaporated, residue resuspended in Milli-Q water, defatted with n-hexane, and solid phase extracted using BondELUT C18 cartridges. Separation was carried out on a C6 phenyl column with a mobile phase consisting of 0.1% formic acid in Milli-Q water and acetonitrile. The detector response was linear over the tested concentration range from 100 to 1000 µg kg−1. The recovery values for all analytes in feed were higher than 79% with RSD for repeatability and reproducibility in the ranges of 4.5–10.9% and 8.4–13.5%, respectively. CCα and CCβ varied between 76.8 and 86.1 µg kg−1, and between 111.3 and 159.9 µg kg−1, respectively. The results showed that this method is effective for the quantification of phenicols in non-target feed.

Magnetic nanoparticles assisted dispersive liquid-liquid microextraction of chloramphenicol in water samples

This work describes the development of a new methodology based on magnetic nanoparticles assisted dispersive liquid-liquid microextraction (DLLME-MNPs) for preconcentration and extraction of chloramphenicol (CAP) antibiotic residues in water. The approach is based on the use of decanoic acid as the extraction solvent followed by the application of MNPs to magnetically retrieve the extraction solvent containing the extracted CAP. The coated MNPs were then desorbed with methanol, and the clean extract was analysed using ultraviolet-visible spectrophotometry. Several important parameters, such as the amount of decanoic acid, extraction time, stirring rate, amount of MNPs, type of desorption solvent, salt addition and sample pH, were evaluated and optimized. Optimum parameters were as follows: amount of decanoic acid: 200 mg; extraction time: 10 min; stirring rate: 800 rpm; amount of MNPs: 60 mg; desorption solvent: methanol; salt: 10%; and sample pH, 8. Under the optimum conditions, the method demonstrated acceptable linearity (R ² = 0.9933) over a concentration range of 50-1000 µg l^-1. Limit of detection and limit of quantification were 16.5 and 50.0 µg l^-1, respectively. Good analyte recovery (91-92.7%) and acceptable precision with good relative standard deviations (0.45-6.29%, n = 3) were obtained. The method was successfully applied to tap water and lake water samples. The proposed method is rapid, simple, reliable and environmentally friendly for the detection of CAP.

Design of heterostructured hybrids comprising ultrathin 2D bismuth tungstate nanosheets reinforced by chloramphenicol imprinted polymers used as biomimetic interfaces for mass-sensitive detection

Combining nanomaterials in varying morphology and functionalities gives rise to a new class of composite materials leading to innovative applications. In this study, we designed a heterostructured hybrid material consisting of two-dimensional bismuth nanosheets augmented by molecularly imprinted networks. Antibiotic overuse is now one of the main concerns in health management, and their monitoring is highly desirable but challenging. So, for this purpose, the resulting composite interface was used as a transducer for quartz crystal microbalances. The main objective was to develop highly selective mass-sensitive sensor for chloramphenicol. Morphological investigation revealed the presence of ultrathin, square shaped nanosheets, 2-3 nm in height and further supplemented by imprinted polymers. Sensor responses are described as the decrease in the frequency of microbalances owing to chloramphenicol re-binding in the templated cavities, yielding a detection limit down to 0.74 μM. This sensor demonstrated a 100 % specific detection of chloramphenicol over its interfering and structural analogs (clindamycin, thiamphenicol, and florfenicol). This composite interface offers the advantage of selective binding and excellent sensitivity due to special heterostructured morphology, in addition to benefits of robustness and online monitoring. The results suggest that such composite-based sensors can be favorable platforms, especially for commercial prospects, to obtain selective detection of other biomolecules of clinical importance.

Development and comparison of liquid-liquid extraction and accelerated solvent extraction methods for quantitative analysis of chloramphenicol, thiamphenicol, florfenicol, and florfenicol amine in poultry eggs

Accelerated solvent extraction was investigated as a novel alternative technology for the separation and quantitative analysis of chloramphenicol, thiamphenicol, florfenicol, and florfenicol amine from poultry eggs, and the results were compared with the results of liquid-liquid extraction. Rapid quantification of the target compounds was carried out by ultra-performance liquid chromatography-electrospray ionization tandem triple quadrupole mass spectrometry. This optimized method was validated according to the requirements defined by the European Union and the United States Food and Drug Administration. Finally, the new approach was successfully applied to the quantitative determination of these analytes in 90 commercial poultry eggs from local supermarkets.

HPLC-DAD analysis of florfenicol and thiamphenicol in medicated feedingstuffs

A simple and reliable method using liquid chromatography with diode array detector was developed for the simultaneous determination of florfenicol and thiamphenicol in medicated feed. The analytes were extracted from the minced feed with methanol and ethyl acetate (1:1, v/v). Next, the extract was further cleaned up by dispersive solid phase extraction using anhydrous magnesium sulfate, PSA and C18 sorbents. Finally, 1 mL of extract was evaporated, the residue resuspended in Milli-Q water, and filtered. The method was validated in-house at medicated levels, in the concentration range 10-300 µg/mL (50-1500 mg/kg). Values of <6.5% and <6.0% were found, respectively, for repeatability and within-laboratory reproducibility. The LODs for the two fenicols were 2.4-5.3 mg/kg, while the LOQs were 3.8-5.6 mg/kg. The expanded uncertainty was estimated to be in the range of 10.0-14.5%, depending on the analyte. Recoveries varied from 81.7% to 97.5%. The methodology was applied to the analysis of animal feedingstuffs collected from poultry and pig farms.

Sensitive detection of antibiotics using aptamer conformation cooperated enzyme-assisted SERS technology

Serious healthcare concerns have been raised on the issue of antibiotic residues after overuse, especially by accumulation in the human body through food webs. Here, we report a methodological development for sensitive detection of antibiotics with aptamer conformation cooperated enzyme-assisted SERS (ACCESS) technology. We design and integrate a set of nucleic acid oligos, realizing specific recognition of chloramphenicol (CAP) and efficient exonuclease III-assisted DNA amplification. It features a "signal-on" analysis of CAP with the limit of detection (15 fM), the lowest concentration detectable in the literature. Our method exhibits a high selectivity on the target analyte, free of interference of other potential antibiotic contaminants. The ACCESS assay promises an ultrasensitive and specific detection tool for trace amounts of antibiotic residues in samples of our daily life.

Determination of Florfenicol, Thiamfenicol and Chloramfenicol at Trace Levels in Animal Feed by HPLC⁻MS/MS

Administration of florfenicol and thiamfenicol through medicated feed is permitted within the European Union, always following veterinary prescription and respecting the withdrawal periods. However, the presence of low levels of florfenicol, thiamfenicol, and chloramfenicol in non-target feed is prohibited. Since cross-contamination can occur during the production of medicated feed and according to Annex II of the European Regulation 2019/4/EC, the control of residue levels of florfenicol and thiamfenicol in non-target feed should be monitored and avoided. Based on all the above, a sensitive and reliable method using liquid chromatography tandem mass spectrometry was developed for the simultaneous detection of chloramfenicol, florfenicol, and thiamfenicol at trace levels in animal feed. Analytes were extracted from minced feed with ethyl acetate. Then, the ethyl acetate was evaporated, the residue was resuspended in Milli-Q water and the extract filtered. The method was in-house validated at carryover levels, with concentration ranging from 100 to 1000 µg/kg. The validation was conducted following the European Commission Decision 2002/657/EC and all performance characteristics were successfully satisfied. The capability of the method to detect amfenicols at lower levels than any prior perspective regulation literature guarantees its applicability in official control activities. The developed method has been applied to non-compliant feed samples with satisfactory results.

Distribution of POPs, pesticides and antibiotic residues in organic honeys from different production areas

Demand for honey is increasing, especially if it is organic and if its nutritional properties are linked to untreated environments in order to guarantee quality for health. Sources of contamination of honey can be divided into environmental and apicultural. Therefore, the distribution of persistent organic pollutants, pesticides and antibiotic residues from geographical areas with different contamination sources (high anthropic impact, intensive farming, husbandry and low anthropic impact) was investigated in order to confirm the potential transfer of xenobiotics into the supply chain and to give beekeepers tools for the selection of areas dedicated to organic production. The presence of polychlorinated biphenyls, polybrominated diphenyl ether and polycyclic aromatic hydrocarbons was confirmed, not only in proximity to highly urbanised centres, where the concentrations were higher, but in all environment contexts, confirming their ubiquity. No antibiotics or neonicotinoids were detected in 95 organic honeys, demonstrating the absence of apicultural treatments and consequently the good quality of honey of different areas. These results are important due to the undefined regulatory European situation on honey antibiotic limits.

A simple and rapid LC-MS/MS method for the determination of amphenicols in Nile tilapia

A quantitative method for analysis of amphenicols (chloramphenicol - CAP, thiamphenicol - TAP and florfenicol - FF) in Nile tilapia using LC-MS/MS is described. A simple sample preparation procedure was optimized using a Plackett-Burman design. The method was validated in accordance with Decision 2002/657/EC. Repeatability and reproducibility were less than 10.7% and 16%, respectively, for all compounds. Recoveries varied from 79.8% to 92.0%. CCα was 0.019, 54.81 and 54.93 μg.kg^-1 for CAP, FF and TAP, respectively. CCβ was 0.068, 64.88 and 58.91 μg.kg^-1 for CAP, FF and TAP, respectively. Limits of quantification (LOQ) were 12.5 μg.kg^-1 for FF and TAP and 0.15 μg.kg^-1 for CAP. Nile tilapia fillets (n = 32) analyzed did not contain chloramphenicol. Thiamphenicol was detected in one sample (3.1%) and florfenicol was detected in every sample, all of them at concentrations below the maximum residue limit.

Application of QuEChERS for Determining Xenobiotics in Foods of Animal Origin

The use of pesticides and veterinary drugs results in the appearance of residues of xenobiotics in foods. Thus, several methods have been developed for monitoring them; however, most are tedious and expensive. By contrast, the QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe) methodology involves a microextraction that yields small samples and has been applied for the analysis of various xenobiotics including pesticides, antibiotics, and mycotoxins. QuEChERS has shown advantages over other techniques including fast sample preparation, reduced needs for reagents and labware, and versatility. This approach allows the simultaneous determination of pesticides with various polarities and volatilities and can be easily modified for the analysis of a wide range of xenobiotics in various matrices including animal products rich in fat. Nevertheless, to attain high recoveries, the extraction, cleanup, and concentration steps have to be optimized according to the target compounds and matrix. Hence, QuEChERS is a promising and environmentally friendly methodology for the high-throughput routine analysis of xenobiotics in animal products. This review focuses on the application of QuEChERS to foods of animal origin and describes recent developments for the optimization of the analysis of veterinary drugs, pesticides, polycyclic aromatic hydrocarbons, and other compounds of concern.

Dispersive Solid Phase Extraction for the Analysis of Veterinary Drugs Applied to Food Samples: A Review

To achieve analytical success, it is necessary to develop thorough clean-up procedures to extract analytes from the matrix. Dispersive solid phase extraction (DSPE) has been used as a pretreatment technique for the analysis of several compounds. This technique is based on the dispersion of a solid sorbent in liquid samples in the extraction isolation and clean-up of different analytes from complex matrices. DSPE has found a wide range of applications in several fields, and it is considered to be a selective, robust, and versatile technique. The applications of dispersive techniques in the analysis of veterinary drugs in different matrices involve magnetic sorbents, molecularly imprinted polymers, carbon-based nanomaterials, and the Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) method. Techniques based on DSPE permit minimization of additional steps such as precipitation, centrifugation, and filtration, which decreases the manipulation of the sample. In this review, we describe the main procedures used for synthesis, characterization, and application of this pretreatment technique and how it has been applied to food analysis.

Electrochemical aptasensor for multi-antibiotics detection based on endonuclease and exonuclease assisted dual recycling amplification strategy

An ultrasensitive electrochemical aptasensor for multiplex antibiotics detection based on endonuclease and exonuclease assisted dual recycling amplification strategy was proposed. Kanamycin and chloramphenicol were selected as candidates. Firstly, aptamers of the antibiotics were immobilized on bar A and then binding with their endonuclease labeled complementary DNA strands to construct enzyme-cleavage probes. Secondly, The nano zirconium-metal organic framework (NMOF) particles with 1,4-benzene-dicarboxylate (BDC) as linker was defined as UiO-66. And its updated version, hierarchically porous UiO-66 (HP-UIO-66) decorated with different electroactive materials as signal tags were synthesized. Then they were immobilized on bar B linked by two duplex DNA strands which can be specifically cleaved by corresponding enzyme-cleavage probes in bar A. Once targets were introduced into system, aptamers can capture them and then release enzyme-cleavage probes. In the presence of exonuclease-I, exonuclease assisted target recycling amplification was triggered and more enzyme-cleavage probes were released into solution. The probes can trigger endonuclease assisted recycles and repeatedly cleave their corresponding duplex DNA strands on bar B then released numerous signal tags into supernatant. Thus two recycling amplification was performed in the system. Finally, MB and Fc in the signal tags were detected by square wave voltammetry after removing bar A/B and the current intensities were correspondent with the concentration of KANA and CAP respectively. Under the optimum condition, the limits of detection for the KANA and CAP were 35fM and 21fM respectively with a wide linear range from 1 × 10^-4 to 50nM. This dual recycling amplification detection system exhibited high sensitivities and specificity. It can be easily extended to detect other targets if changing the corresponding aptamers and has potential application values for screening of multiplex antibiotics residues in food safety.

Development of a high-performance liquid chromatography method for the determination of florfenicol in animal feedstuffs

An effective thin layer chromatography (TLC) purification procedure coupled to high-performance liquid chromatography (HPLC) method was developed for the determination of florfenicol (FF) in pig, chicken and fish feedstuffs. The feedstuff samples were extracted with ethyl acetate, defatted with n-hexane saturated with acetonitrile, and further purified by TLC. The chromatographic separation was performed on a Waters Symmetry C₁₈ column using an isocratic procedure with acetonitrile-water (35:65, v/v) at 0.6mL/min. The ultraviolet (UV) detector was set at a wavelength of 225nm. The FF concentrations in feedstuff samples were quantified using a standard curve. Good linear correlations (y=159075x-15054, r>0.9999) were achieved within the concentration range of 0.05-200μg/mL. The recoveries of FF spiked at levels of 1, 100 and 1000μg/g ranged from 80.6% to 105.3% with the intra-day and inter-day relative standard deviation (RSD) less than 9.3%. The limit of detection (LOD) and limit of quantitation (LOQ) were 0.02 and 0.06mg/kg for pig feedstuffs, 0.02 and 0.07mg/kg for chicken feedstuffs, and 0.02 and 0.05mg/kg for fish feedstuffs, respectively. This reliable, simple and cost-effective method could be applied to the routine monitoring of FF in animal feedstuffs.

Degradation of chloramphenicol by potassium ferrate (VI) oxidation: kinetics and products

The oxidation of chloramphenicol (CAP) by potassium ferrate (VI) in test solution was studied in this paper. A series of jar tests were performed at bench scale with pH of 5-9 and molar ratio [VI/CAP] of 16.3:1-81.6:1. Results showed that raising VI dose could improve the treatment performance and the influence of solution pH was significant. VI is more reactive in neutral conditions, presenting the highest removal efficiency of CAP. The rate law for the oxidation of CAP by VI was first order with respect to each reactant, yielding an overall second-order reaction. Furthermore, five oxidation products were observed during CAP oxidation by VI. Results revealed that VI attacked the amide group of CAP, leading to the cleavage of the group, while benzene ring remained intact.