Nanocoating cellulose paper based microextraction combined with nanospray mass spectrometry for rapid and facile quantitation of ribonucleosides in human urine

Recent Advances in Catecholamines Analytical Detection Methods and Their Pretreatment Technologies

Catecholamines (CAs), including adrenaline, noradrenaline, and dopamine, are neurotransmitters and hormones that play a critical role in regulating the cardiovascular system, metabolism, and stress response in the human body. As promising methods for real-time monitoring of catecholamine neurotransmitters, LC-MS detectors have gained widespread acceptance and shown significant progress over the past few years. Other detection methods such as fluorescence detection, colorimetric assays, surface-enhanced Raman spectroscopy, and surface plasmon resonance spectroscopy have also been developed to varying degrees. In addition, efficient pretreatment technology for CAs is flourishing due to the increasing development of many highly selective and recoverable materials. There are a few articles that provide an overview of electrochemical detection and efficient enrichment, but a comprehensive summary focusing on analytical detection technology is lacking. Thus, this review provides a comprehensive summary of recent analytical detection technology research on CAs published between 2017 and 2022. The advantages and limitations of relevant methods including efficient pretreatment technologies for biological matrices and analytical methods used in combination with pretreatment technology have been discussed. Overall, this review article provides a better understanding of the importance of accurate CAs measurement and offers perspectives on the development of novel methods for disease diagnosis and research in this field.

Development of paper-immobilized molecularly imprinted polymers by laser pointer activation for methamphetamine extraction with analysis by ion mobility spectrometry

A fast, simple, cheap, and versatile strategy has been proposed for the synthesis of paper-immobilized molecularly imprinted polymers (MIPs) by photoactivated bulk polymerization over a piece of nitrocellulose using a 405 nm laser pointer. Polymerization was carried out using a mixture of methacrylic acid and ethylene glycol dimethacrylate, using methamphetamine as template molecule and bis(2,4,6-trimethylbenzoyl)phenylphosphine oxide as radical initiator. After investigation of different polymerization parameters, the following experimental conditions were found to give best results: size of nitrocellulose strip (13.5 × 4.0 × 0.8 mm), type of porogen (acetonitrile), polymerization mixture volume (75 µL), and irradiation times (10 min). Experimental conditions (such as sample pH, extraction and desorption time, and type and volume of desorption solvent) were also adjusted for the extraction of methamphetamine using the proposed paper-MIP. Methamphetamine determination was carried out by ion mobility spectrometry providing a limit of detection of 14 µg L^-1 and quantitative recoveries from 81 to 95% using spiked urine and oral fluid samples. The proposed paper-immobilized MIP device allows a simple and selective sample extraction procedure for the determination of methamphetamine in oral fluids and urine with a high portability, minimal solvent consumption, and reduced costs compared to other conventional approaches.

Paper-based sorptive phases for microextraction and sensing

The simplification of the analytical procedures, including cost-effective materials and detectors, is a current research trend. In this context, paper has been identified as a useful material thanks to its low price and high availability in different compositions (office, filter, chromatographic). Its porosity, flexibility, and planar geometry permit the design of flow-through devices compatible with most instrumental techniques. This article provides a general overview of the potential of paper, as substrate, on the simplification of analytical chemistry methodologies. The design of paper-based sorptive phases is considered in-depth, and the different functionalization strategies are described. Considering our experience in sample preparation, special attention has been paid to the use of these phases under the classical microextraction-analysis workflow, which usually includes a chromatographic separation of the analytes before their determination. However, the interest of these materials extends beyond this field as they can be easily implemented into spectroscopic and electrochemical sensors. Finally, the direct analysis of paper substrates in mass spectrometry, in the so-called paper-spray technique is also discussed. This review is more focused on presenting ideas rather than the description of specific applications to draw a general picture of the potential of these materials.

Extraction of nucleobases, nucleosides and nucleotides by employing a magnetized graphene oxide functionalized with hydrophilic phytic acid and titanium(IV) ions

A magnetite@graphene oxide nanocomposite was first coated with polyethylenimine and then modified with phytic acid and titanium(IV) ions. The high loading with Ti(IV) and the good hydrophilicity of PEI and PA result in a material that can be applied to the efficient extraction of highly polar nucleobases, nucleosides and nucleotides. The physicochemical properties of the composite were investigated by scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, water contact angle measurements, thermogravimetric analysis, and vibrating sample magnetometry. A series of parameters that affect extraction and elution under the conditions of immobilized metal affinity chromatography (IMAC) and hydrophilic interaction liquid chromatography (HILIC) were examined. The analytes were eluted from the nanocomposites using 10 mM trisodium phosphate as the elution solution in the IMAC mode, and 50% methanol-water as elution solution in the HILIC mode. Figures of merit include (a) an intra-day precision of 0.1-1.0% in the IMAC mode; (b) an intra-day precision of 0.4%-0.8% in the HILIC mode; (c) detection limits between 1.8-2.8 ng mL^-1 in the IMAC mode; and (d) detection limits of 4.0-10.5 ng mL^-1 in the HILIC mode. The method was applied to the extraction of the nucleotides cytidine-5'-monophosphate (CMP), uridine-5'-monophosphate (UMP), guanosine-5'-monophosphate (GMP), and adenosine-5'-monophosphate (AMP), and the nucleobases and nucleosides hypoxanthine, adenosine, cytosine, inosine and cytidine from Cordyceps sinensis, Lentinus edodes and plasma samples. Graphical abstract Schematic presentation of the workflow for the extraction of nucleobases, nucleosides and nucleotides using phytic acid-Ti(IV) functionalized magnetite@graphene oxide nanocomposites under two distinct modes.

Urinary Nucleosides and Deoxynucleosides

Urinary nucleosides and deoxynucleosides are mainly known as metabolites of RNA turnover and oxidative damage of DNA. For several decades these metabolites have been examined for their potential use in disease states including cancer and oxidative stress. Subsequent improvements in analytical sensitivity and specificity have provided a reliable means to measure these unique molecules to better assess their relationship to physiologic and pathophysiologic conditions. In fact, some are currently used as antiviral and antitumor agents. In this review we provide insight into their molecular characteristics, highlight current separation techniques and detection methods, and explore potential clinical usefulness.