A high performance potentiometric sensor for lactic acid determination based on molecularly imprinted polymer/MWCNTs/PVC nanocomposite film covered carbon rod electrode

Boosting Electrochemical Sensing Performances Using Molecularly Imprinted Nanoparticles

Nanoparticles of molecularly imprinted polymers (nanoMIPs) combine the excellent recognition ability of imprinted polymers with specific properties related to the nanosize, such as a high surface-to-volume ratio, resulting in highly performing recognition elements with surface-exposed binding sites that promote the interaction with the target and, in turn, binding kinetics. Different synthetic strategies are currently available to produce nanoMIPs, with the possibility to select specific conditions in relation to the nature of monomers/templates and, importantly, to tune the nanoparticle size. The excellent sensing properties, combined with the size, tunability, and flexibility of synthetic protocols applicable to different targets, have enabled the widespread use of nanoMIPs in several applications, including sensors, imaging, and drug delivery. The present review summarizes nanoMIPs applications in sensors, specifically focusing on electrochemical detection, for which nanoMIPs have been mostly applied. After a general survey of the most widely adopted nanoMIP synthetic approaches, the integration of imprinted nanoparticles with electrochemical transducers will be discussed, representing a key step for enabling a reliable and stable sensor response. The mechanisms for electrochemical signal generation will also be compared, followed by an illustration of nanoMIP-based electrochemical sensor employment in several application fields. The high potentialities of nanoMIP-based electrochemical sensors are presented, and possible reasons that still limit their commercialization and issues to be resolved for coupling electrochemical sensing and nanoMIPs in an increasingly widespread daily-use technology are discussed.

Molecularly Imprinted Polymer-Based Sensors for the Detection of Skeletal- and Cardiac-Muscle-Related Analytes

Molecularly imprinted polymers (MIPs) are synthetic polymers with specific binding sites that present high affinity and spatial and chemical complementarities to a targeted analyte. They mimic the molecular recognition seen naturally in the antibody/antigen complementarity. Because of their specificity, MIPs can be included in sensors as a recognition element coupled to a transducer part that converts the interaction of MIP/analyte into a quantifiable signal. Such sensors have important applications in the biomedical field in diagnosis and drug discovery, and are a necessary complement of tissue engineering for analyzing the functionalities of the engineered tissues. Therefore, in this review, we provide an overview of MIP sensors that have been used for the detection of skeletal- and cardiac-muscle-related analytes. We organized this review by targeted analytes in alphabetical order. Thus, after an introduction to the fabrication of MIPs, we highlight different types of MIP sensors with an emphasis on recent works and show their great diversity, their fabrication, their linear range for a given analyte, their limit of detection (LOD), specificity, and reproducibility. We conclude the review with future developments and perspectives.

Electrochemical detection of lactate produced by foodborne presumptive lactic acid bacteria

The detection of lactate is an important indicator of the freshness, stability, and storage stability of products as well as the degree of fermentation in the food industry. In addition, it can be used as a diagnostic tool in patients' healthcare since it is known that the lactate level in blood increases in some pathological conditions. Thus, the determination of lactate level plays an important role in not only the food industry but also in health fields. As a result, biosensor technologies, which are quick, cheap, and easy to use, have become important for lactate detection. In the current study, amperometric lactate biosensors based on lactate oxidase immobilization (with Nafion 5% wt) were designed and the limit of detection, linear range, and sensitivity values were determined to be 31 μM, 50-350 μM, and 0.04 μA μM^-1 cm^-2, respectively. Then, it was used for the measurement of lactic acid that produced by six different and morphologically identified presumptive lactic acid bacteria (LAB) which are isolated from different naturally fermented cheese samples. The biosensors were then used to successfully perform lactate measurements within 3 min for each sample, even though a few of them were out of the limit of detection. Thus, electrochemical biosensors should be used as an alternative and quick solutions for the measurement of lactate metabolites rather than the traditional methods which require long working hours. This is the first study to use a biosensor to measure lactate produced by foodborne LAB in a real sample.

A new molecularly imprinted polymer electrochemical sensor based on CuCo2 O4 /N-doped CNTs/P-doped GO nanocomposite for detection of 25-hydroxyvitamin D3 in serum samples

25-Hydroxyvitamin D₃ as a main circulating metabolite of vitamin D is usually measured in serum to evaluate the vitamin D status of humans. So, developing an accessible, fast response, sensitive, and selective detection method for 25-hydroxyvitamin D₃ is highly important. In this study, we designed a sensitive and selective electrochemical sensor based on the modification of glassy carbon electrode by nanocomposite of CuCo₂ O₄ /nitrogen-doped carbon nanotubes and phosphorus-doped graphene oxide. Then 25-hydroxyvitamin D₃ -imprinted polypyrrole was coated on the electrode surface through electropolymerization. Moreover, ferricyanide was used as a mediator for the creation of a readable signal, which was considerably decreased after rebinding of 25-hydroxyvitamin D₃ on the electrode. The proposed sensor successfully detected 25-hydroxyvitamin D₃ in the range of 0.002-10 μM, with a detection limit of 0.38 nM, which was highly lower than deficiency concentration (20 ng/ml; 49.92 nM). Finally, the proposed sensor was checked for detection of 25-hydroxyvitamin D3 in serum samples with recovery in the range of 80%-106.42%. The results demonstrated the applicability of the designed sensor for the detection of 25-hydroxyvitamin D₃ in biological samples.

Chromatographic methods for rapid aflatoxin B1 analysis in food: a review

Aflatoxin B1 (AFB1) is a mycotoxin and is the most carcinogenic of all known chemicals. In view of the AFB1 characteristics of widespread distribution, serious pollution, great harm to humans, and animals and difficult to remove, it is urgent to develop a convenient and sensitive detection method. Moreover, chromatographic test strips (CTSs) are a rapid detection technology that combines labeling technology with chromatography technology. CTSs have been widely used in the fields of environmental monitoring, medical diagnosis, and food safety analysis in recent years. Different from other immune assays, they have the advantages of short measuring time, low cost, high efficiency and no need for professionals to operate. In addition, the introduction of nanomaterials has laid a good foundation for the detection of high sensitivity, high specificity and high efficiency via CTSs. Herein, we tend to comprehensively introduce the applications of chromatographic methods in AFB1 detection and pay attention to the signal detection modes based on nanomaterials in antibody-based immunochromatographic strips (ICSs), such as colorimetric, fluorescent, chemiluminescent, and Raman scattering sensing. Some typical examples are also listed in this review. In the end, we make a summary and put forward prospects for the development of CTSs.

Molecularly imprinted polymer specific to creatinine complex with copper(II) ions for voltammetric determination of creatinine

Synthesis of creatinine-imprinted polymer is challenging because of its insolubility in aprotic solvents, traditionally utilized for synthesizing molecularly imprinted polymer (MIP). Moreover, creatinine is not electroactive at conventional electrodes, and thus, introducing an electrochemical sensing platform for its determination is a difficult target. This study addressed the above-cited issues to introduce a novel creatinine voltammetric sensor with high selectivity and sensitivity. Creatinine-copper complex was found to be soluble in acetonitrile and was utilized as a template for the MIP synthesis. Methacrylic acid, ethylene glycol dimethacrylate, and azobisisobutyronitrile were used as functional monomers, cross-linker, and initiator, respectively. The MIP holding creatinine sites were used to modify the carbon paste electrode. Since creatinine did not exhibit a significant voltammetric signal, an indirect sensing technique was employed. This was based on using Cu(II) ion as an electrochemical probe. The MIP-modified electrode signal for copper ion was significantly improved in the presence of creatinine. However, the introduction of creatinine in the Cu(II) solution did not affect the NIP-modified electrode response to copper ion. The proposed sensor indicated a linear current response in the range 1 × 10^-7-1 × 10^-5 mol L^-1 with a detection limit of 5.9 × 10^-8 mol L^-1 (S/N = 3). Moreover, this method presents excellent performance in real sample analysis, with values of favorable creatinine recovery in plasma. The system exhibits acceptable precision (RSD = 4.04) and favorable selectivity toward creatinine.

Nano-Scaled Materials and Polymer Integration in Biosensing Tools

The evolution of biosensors and diagnostic devices has been thriving in its ability to provide reliable tools with simplified operation steps. These evolutions have paved the way for further advances in sensing materials, strategies, and device structures. Polymeric composite materials can be formed into nanostructures and networks of different types, including hydrogels, vesicles, dendrimers, molecularly imprinted polymers (MIP), etc. Due to their biocompatibility, flexibility, and low prices, they are promising tools for future lab-on-chip devices as both manufacturing materials and immobilization surfaces. Polymers can also allow the construction of scaffold materials and 3D structures that further elevate the sensing capabilities of traditional 2D biosensors. This review discusses the latest developments in nano-scaled materials and synthesis techniques for polymer structures and their integration into sensing applications by highlighting their various structural advantages in producing highly sensitive tools that rival bench-top instruments. The developments in material design open a new door for decentralized medicine and public protection that allows effective onsite and point-of-care diagnostics.

Organic Bioelectronic Devices for Metabolite Sensing

Electrochemical detection of metabolites is essential for early diagnosis and continuous monitoring of a variety of health conditions. This review focuses on organic electronic material-based metabolite sensors and highlights their potential to tackle critical challenges associated with metabolite detection. We provide an overview of the distinct classes of organic electronic materials and biorecognition units used in metabolite sensors, explain the different detection strategies developed to date, and identify the advantages and drawbacks of each technology. We then benchmark state-of-the-art organic electronic metabolite sensors by categorizing them based on their application area (in vitro, body-interfaced, in vivo, and cell-interfaced). Finally, we share our perspective on using organic bioelectronic materials for metabolite sensing and address the current challenges for the devices and progress to come.

Progress in pretreatment and analysis of organic Acids: An update since 2010

Organic acids, as an important component of food, have great influence on the flavor, texture, freshness of food. By lowering the pH of food to bacteriostatic acidity, organic acids are also used as additives and preservatives. Because organic acids are crucial to predict and evaluate food maturity, production and quality control, the rapid and sensitive determination methods of organic acids are necessary. This review aims to summarize and update the progress of the determination of organic acids in food samples. Pretreatment methods include simple steps (e.g., "dilute and shoot," protein precipitation, filtration, and centrifugation) and advanced microextraction methods (e.g., hollow fiber liquid phase microextraction, stir bar sorptive extraction and dispersive micro-solid phase extraction). Advances in novel materials (nanomaterial), solvents (ionic liquids and supercritical fluids) and hybrid methods are clearly displayed in detail. Continuous progress which has been made in electrochemical method, two-dimensional chromatography, high resolution mass is thoroughly illustrated.

Determination of cesium ions in environmental water samples with a magnetic multi-walled carbon nanotube imprinted potentiometric sensor

A potentiometric sensor, based on the glassy carbon electrode (GCE) modified with a magnetic multi-walled carbon nanotubes/cesium ion-imprinted polymer composite (MMWCNTs@Cs-IIP), is introduced for the detection of cesium(i). The IIP was synthesized using cesium ions as the template ions, chitosan as the functional monomer and glutaraldehyde as the cross-linking agent. The membrane, which was coated on the surface of the GCE, was prepared using MMWCNTs@Cs(i)-IIP as the modifier, PVC as the neutral carrier, 2-nitrophenyloctyl ether as the plasticizer and sodium tetraphenylborate as the lipophilic salt. The proposed sensor exhibited a Nernstian slope of 0.05954 V dec⁻¹ in a working concentration range of 1 × 10⁻⁷ to 1 × 10⁻⁴ M (mol L⁻¹) with a detection limit of 4 × 10⁻⁸ M. The sensor exhibited high selectivity for cesium ions and was successfully applied for the determination of Cs(i) in real samples.

A Cs(i)-selective potentiometric microsensor based on the glassy carbon electrode (GCE) modified with a magnetic multi-walled carbon nanotubes/cesium ion-imprinted polymer has been developed.

Selective Targeted Drug Delivery Mechanism via Molecular Imprinted Polymers in Cancer Therapeutics

Artificial receptor-like structures such as molecular imprinted polymers (MIPs) are biomimetic molecules are used to replicate target specific antibody-antigen mechanism. In MIPs, selective binding of template molecule can be significantly correlated with lock and key mechanism, which play a major role in the drug delivery mechanism. The MIPs are biocompatible with high efficiency and are considered in several drug delivery and biosensor applications besides continuous and controlled drug release leading to better therapeutics. There is a need to explore the potential synthetic methods to improve MIPs with respect to the imprinting capacity in cancer therapeutics. In this review, we focus on MIPs as drug delivery mechanism in cancer and the challenges related to their synthesis and applications.

Preparation and characterization of novel MWCNTs/Fe-Co doped TNTs nanocomposite for potentiometric determination of sulpiride in real water samples

Novel multiwalled carbon nanotubes/ Fe-Co doped titanate nanotubes nanocomposite (MWCNTs/Fe-Co doped TNTs) facilitated the charge transfer and enhanced sensitivity and selectivity. Herein, three novel modified carbon paste sensors (CPSs) based on MWCNTs (sensor I), Fe-Co doped TNTs (sensor II) and MWCNTs/Fe-Co doped TNTs composite (sensor III) were fabricated for a simple, low cost and high accuracy electrochemical method for the potentiometric determination of sulpiride (SLP). The sensors exhibited excellent Nernstian slopes 57.1 ± 0.4, 56 ± 0.5 and 58.8 ± 0.2 mV decade⁻¹ with detection limits (DL) 7.6 × 10⁻⁷, 1.58 × 10⁻⁶ and 8.7 × 10⁻⁸ mol L⁻¹, quantification limits (QL) 2.5 × 10⁻⁶, 5.2 × 10⁻⁶ and 2.9 × 10⁻⁷ mol L⁻¹ for a long lifetime 20, 18, and 25 weeks for sensors (I), (II), and (III), respectively. The modified sensor (III) was applicable by measuring the concentration of spiked SLP in pure solutions, pharmaceutical products, human urine, and real water samples. The proposed method can be used as an important analytical tool in the quality control of the pharmaceutical industry.

μ-Thin-layer chromatography coupled with laser ablation-inductively coupled plasma-mass spectrometry using tin(II)-imprinted polymer nanoparticles as a stationary phase for speciation of tin

A unique and novel μ-thin-layer chromatography method based on Sn(II) ion-imprinted polymer (Sn-IIP) for speciation of tin ion species in water and plasma samples is introduced for the first time. For this purpose, N-allylthiourea (NATU) and ethylene glycol dimethacrylate (EGDMA) were copolymerized in the presence of Sn(II). The obtained polymer particles were identified using multiple techniques like BET, FT-IR, XRD, and FESEM. The effects of different variables such as pH of the solution, mobile phase composition, and IIP per CaSO₄ mass ratio on the separation efficiency were also evaluated. After completion of the separation process on the plate, its surface was scanned by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Under the established optimal condition, the detection limit, relative standard deviation (RSD) of responses, and linear dynamic range (LDR) of the method were obtained as 0.3 μg L^-1, 3.5%, and 0.8-900 μg L^-1 for Sn(II) and 0.4 μg L^-1, 4%, and 1-740 μg L^-1 for Sn(IV) assay, respectively. The developed method was finally applied to the speciation of tin in various water and plasma samples. Graphical abstract Schematic representation of μ-thin-layer chromatography method based on tin(II) ion-imprinted polymer (Sn-IIP) for speciation of tin ion species in water and plasma samples and scanned separated casts by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS).

Electrochemical sensing of lactate by using an electrode modified with molecularly imprinted polymers, reduced graphene oxide and gold nanoparticles

This paper reports on a sensitive and selective electrochemical sensor for lactic acid. The sensor is based on molecularly imprinted polymers (MIP), obtained on glassy carbon electrode (GCE) modified with reduced graphene oxide and gold nanoparticles. The MIP was obtained by electropolymerization of the o-phenylenediamine (o-PD) on the modified surface of the GCE in the presence of lactic acid. The steps involving the GCE modification and MIP construction were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy and atomic force microscopy. The results were evaluated using differential pulse voltammetry, using the hexacyanoferrate redox system as an electrochemical probe. Under optimized experimental conditions, the imprinted sensor has a linear response in the 0.1 nM to 1.0 nM lactic acid concentration range, with detection limit of 0.09 nM. The sensor exhibits excellent selectivity in the presence of molecules of similar chemical structure. It was applied for the selective determination of lactic acid in sugarcane vinasse. The recovery values ranged from 97.7 to 104.8%. Graphical abstractSchematic representation for MIP/AuNP/RGO/GCE sensor, obtained by electropolymerization of o-phenylediamine (o-PD) on a surface modified with gold nanoparticles (AuNPs) and reduced graphene oxide (RGO). These materials allowed the construction of a MIP-sensor with good selectivity for lactic acid.