Fabrication of an Ag-based SERS nanotag for histamine quantitative detection

In situ synthesis of luminescent dsDNA-Cu NCs stained with a dsDNA-lighted fluorophore for rapid and stable detection of histamine in food

Poisonous histamine is accumulated in stale meat and fermented foods. The rapid and stable detection of histamine is essential for food safety. Herein, a ratiometric fluorometric method for histamine detection was designed through in situ preparing double-stranded DNA‑copper nanoclusters (dsDNA-Cu NCs) stained with 4',6-diamidino-2-phenylindole (DAPI). dsDNA-Cu NCs with red emission were rapidly synthesized via mixing Cu2+, ascorbate and dsDNA at room temperature for 5 min. When DAPI was added during preparation, DAPI coordinated with the Cu element accompanied by the quenched red emission of dsDNA-Cu NCs, and DAPI bound to dsDNA together with the enhanced blue emission of DAPI. Upon adding DAPI and histamine simultaneously, the coordination of histamine with the Cu element further decreased the red emission of dsDNA-Cu NCs, and drove the movement of DAPI from the Cu element to dsDNA along with the enhanced blue emission of DAPI. Significantly, ratiometric fluorescence was insensitive to variations in instrument and environment, causing stable measurement. Meanwhile, in situ synthesis integrated probe preparation with analyte detection, reducing time consumption. Additionally, this method quantified histamine in the concentration range of 7-50 μM with a detection limit of 3.6 μM. It was applied to determining histamine in food with satisfactory accuracy and precision.

Selective and sensitive detection of dimethyl phthalate in water using ferromagnetic nanomaterial-based molecularly imprinted polymers and SERS

To overcome the complicated pretreatment, low selectivity and low sensitivity detection associated with the detection of dimethyl phthalate (DMP), this study synthesized ferromagnetic nanomaterials that coupled with surface enhanced Raman scattering (SERS) and molecular imprinting polymers (MIPs). The pretreatment process can be simplified by ferromagnetic nanomaterials, then Fe3O4@SiO2@Ag@MIPs selectively adsorbing DMP can be achieved, and SERS can be applied for DMP detection with high sensitivity. As a control, the non-imprinted polymers (NIPs) Fe3O4@SiO2@Ag@NIPs were synthesized. Adsorption experiments results showed that the saturation adsorption amounts of Fe3O4@SiO2@Ag@MIPs is 36.74 mg/g with 40 mg/L DMP and Fe3O4@SiO2@Ag@NIPs is 17.45 mg/g. For DMP, Fe3O4@SiO2@Ag@MIPs have a greater affinity. In addition, after seven adsorption-desorption cycles the Fe3O4@SiO2@Ag@MIPs are reusable with approximately a 9.8 % loss in adsorption capacity. With an 8.7 × 10-9 M detection limit, DMP detection was performed by SERS, which revealed that the Raman intensities of the associated characteristic peak were linearly proportional to the DMP concentrations. As a result, the recovery rate of the testing artificial water varied from 87.9 % to 117 %. These outcomes show that the suggested technique for finding DMP in actual water samples is practical.

Sensitive SERS aptasensor for histamine detection based on Au/Ag nanorods and IRMOF-3@Au based flexible PDMS membrane

BACKGROUND

Histamine is a kind of biogenic amine with strong toxicity and potential carcinogenicity. Many traditional methods of detecting histamine have the disadvantages of cumbersome detection steps, expensive equipment, and high professional requirements for staff. In contrast, SERS has become the preferred method for quantitative analysis of histamine because of rich fingerprint information, rapidity and economy. However, most of SERS substrates still have technical problems, such as poor stability, low sample collection rate, and detection efficiency. Therefore, there is a great need for new strategies to develop high-performance SERS substrates based sensors.

RESULTS

In our study, a sensitive SERS aptasensor for the detection of histamine was synthesized. The assembly was formed between IRMOF-3@Au/PDMS (flexible SERS substrate) and AuNR-DTNB@Ag-HA apt (Raman signal probe with both the target capture ability) via π-π stacking interaction from HA aptamer and IRMOF-3. Consequently, the SERS signal of the assembly derived from DTNB reached highest due to the synergistic enhancement effect by AuNR@Ag and IRMOF-3@Au. Meanwhile, HA aptamer can specifically capture histamine, therefore histamine addition competitively bound to the probe, leading to a corresponding decrease in the DTNB signal value on the SERS substrate. The SERS intensity at 1331 cm-1 presented a good linear relationship towards the logarithmic value of histamine concentrations ranging from 0.0001 mg/L to 400 mg/L (R2 = 0.990) with the LOD of 3.6 × 10-5 mg/L. Furthermore, the application in wine samples demonstrated the accuracy and applicability of the developed sensor.

SIGNIFICANCE

This method effectively improves substrate stability, detection sensitivity and signal response immediacy to amplify the SERS sensor, thus satisfying the histamine detection requirements of various systems. According to this aptasensor design, our strategy can be extended to create other MOF-based SERS substrates for accurately detecting relative targets to ensure food safety.

Breaking Barriers: Exploring Neurotransmitters through In Vivo vs. In Vitro Rivalry

Neurotransmitter analysis plays a pivotal role in diagnosing and managing neurodegenerative diseases, often characterized by disturbances in neurotransmitter systems. However, prevailing methods for quantifying neurotransmitters involve invasive procedures or require bulky imaging equipment, therefore restricting accessibility and posing potential risks to patients. The innovation of compact, in vivo instruments for neurotransmission analysis holds the potential to reshape disease management. This innovation can facilitate non-invasive and uninterrupted monitoring of neurotransmitter levels and their activity. Recent strides in microfabrication have led to the emergence of diminutive instruments that also find applicability in in vitro investigations. By harnessing the synergistic potential of microfluidics, micro-optics, and microelectronics, this nascent realm of research holds substantial promise. This review offers an overarching view of the current neurotransmitter sensing techniques, the advances towards in vitro microsensors tailored for monitoring neurotransmission, and the state-of-the-art fabrication techniques that can be used to fabricate those microsensors.

Spectro-Electrochemical Properties of A New Non-Enzymatic Modified Working Electrode Used for Histamine Assessment in the Diagnosis of Food Poisoning

We successfully prepared a non-enzymatic sensor based on a graphene-thiophene composite for histamine detection. The self-assembling properties of the thiophene onto Au support and the high electrical conductivity of graphene encouraged the choice of this type of composite. The composite was deposited via electrochemical polymerization onto the Au layer of a screen-printed microelectrode. The electropolymerization and electrochemical detection of histamine were both achieved by cyclic voltammetry. Two types of electrolytes were used for the electrochemical detection: (a) phosphate buffer solution (PBS), which showed low-intensity redox peaks for histamine; and (b) trichloroacetic acid (TCA) 0.01 M, which showed improved results over PBS and did not damage the microelectrode. For the concentration range of 100-200 mg/kg, the sensor shows a linear regression pattern for the oxidation peak fitted on the equation Ipa = 123.412 + 0.49933 ×x, with R2 = 0.94178. The lowest limit of detection was calculated to be 13.8 mg/kg and the limit of quantification was calculated at 46 mg/kg. These results are important since by monitoring the amount of histamine in a food product, early onset of spoilage can be easily detected, thus reducing foodborne poisoning and food waste (by recycling products that are still edible).