A convergent, modular access to complex amines

Some Aspects of α-(Acyloxy)alkyl Radicals in Organic Synthesis

The preparation and use of α-(acyloxy)alkyl xanthates to generate and capture α-(acyloxy)alkyl radicals is briefly reviewed. Their inter- and intramolecular additions to both activated and unactivated, electronically unbiased, alkenes, and to (hetero)aromatic rings, as well as their radical allylation and vinylation reactions are described. Application to the total synthesis of two 4-hydroxytetralone natural products is also presented.

Reversible Addition-Fragmentation Chain Transfer Step-Growth Polymerization with Commercially Available Inexpensive Bis-Maleimides

Here, commercially available N-aromatic substituted bismaleimides were used in RAFT step-growth polymerization for the first time. In our initial report (J. Am. Chem. Soc. 2021, 143 (39), 15918-15923), maleimide precursors...

Photo-Iniferter RAFT Polymerization

Light-mediated polymerization techniques offer distinct advantages over polymerization reactions fueled by thermal energy, such as high spatial and temporal control as well as the possibility to work under mild reaction conditions. Reversible addition-fragmentation chain-transfer (RAFT) polymerization is a highly versatile radical polymerization method that can be utilized to control a variety of monomers and produce a vast number of complex macromolecular structures. The use of light to drive a RAFT-polymerization is possible via multiple routes. Besides the use of photo-initiators, or photo-catalysts, the direct activation of the chain transfer agent controlling the RAFT process in a photo-iniferter (PI) process is an elegant way to initiate and control polymerization reactions. Within this review, PI-RAFT polymerization and its advantages over the conventional RAFT process are discussed in detail.

A Modular Access to 1,2- and 1,3-Disubstituted Cyclobutylboronic Esters by Consecutive Radical Additions

A modular approach to substituted cyclobutylboronic esters is described. It proceeds by successive intermolecular radical additions of xanthates to pinacolato 1-cyclobutenylboronate and to pinacolato bicyclo[1.1.0]but-1-ylboronate. Success hinges on tuning the stability of the α-boryl radical by exploiting the stabilizing influence of the trivalent boronic ester and the slightly destabilizing cyclobutane, which increases the σ-character of the radical. Reductive removal of the xanthate group finally provides a range of 1,2- and 1,3-disubstituted cyclobutylboronic esters. The contrast with cyclopropylboronic esters is striking, since the strong destabilization by the highly strained cyclopropane ring allows the first radical addition to take place but not the second. Furthermore, the first adducts are geminal xanthyl boronic esters that can be converted into cyclobutanones. This chemistry furnishes cyclobutylboronic esters that would be quite difficult to obtain otherwise and thus complements existing methods.

A Convergent, Stereoselective Route to Trisubstituted Alkenyl Boronates

A modular, stereoselective route to trisubstituted (Z)-alkenyl (MIDA)boronates is described, consisting of the radical addition-fragmentation of dithiocarbonates to 2-(MIDA)boronyl-3-(2'-fluoro-pyridyl-6'-oxy)-alkenes. The bulky (MIDA)boronate ensures a highly stereoselective fragmentation that is enhanced by the poor stabilization of the radical adjacent to the tetravalent boron atom. The vinyl boronate precursors are prepared from propargyl alcohols by copper-catalyzed regioselective protoboration of their fluoropyridoxy derivatives, with the fluoropyridine acting as an internal directing group.

PET-RAFT single unit monomer insertion of β-methylstyrene derivatives: RAFT degradation and reaction selectivity

Reversible addition-fragmentation chain transfer (RAFT) single unit monomer insertion (SUMI) of β-methylstyrene derivatives into diverse RAFT agents presented fast reaction kinetics, but significant degradation of the SUMI products occurred due to a hydrogen abstraction reaction. Fortunately, such degradation can be suppressed through appropriate design of initial RAFT agents attributed to effective chain transfer and selective photoactivation.

Reversible-Addition Fragmentation Chain Transfer Step-Growth Polymerization

Reversible-addition fragmentation chain transfer (RAFT) polymerization has been widely explored since its discovery due to its structural precision, versatility, and efficiency. However, the lack of tunability of the polymer backbone limits some applications. Herein, we synergistically combine RAFT and step-growth polymerization mechanisms, by employing a highly selective insertion process of a single monomer with a RAFT agent, to achieve RAFT step-growth polymerization. A unique feature of the RAFT step-growth polymers is that each backbone repeat unit bears a pendant RAFT agent, which can subsequently graft side chains in a second polymerization step and afford molecular brush polymers. Enabled by cleavable backbone functionality, we demonstrate transformation of the resulting brushlike polymers into linear chains of uniform size upon a stimulus.

A Giese reaction for electron-rich alkenes

A general method for the hydroalkylation of electron-rich terminal and non-terminal alkenes such as enol esters, alkenyl sulfides, enol ethers, silyl enol ethers, enamides and enecarbamates has been developed. The reactions are carried out at room temperature under air initiation in the presence of triethylborane acting as a chain transfer reagent and 4-tert-butylcatechol (TBC) as a source of hydrogen atom. The efficacy of the reaction is best explained by very favorable polar effects supporting the chain process and minimizing undesired polar reactions. The stereoselective hydroalkylation of chiral N-(alk-1-en-1-yl)oxazolidin-2-ones takes place with good to excellent diastereocontrol.

Giese reaction not anymore limited to electron poor alkenes! A general method for the radical mediated hydroalkylation of electron rich alkenes including enol ethers, silylenolethers, enamides, and enecarbamates has been developed.

Synthesis of monodisperse isomeric oligomers based on meta-/para- and linear/star-monomer precursors with Ugi–hydrosilylation orthogonal cycles

Monodisperse oligomers were precisely prepared through orthogonal cycles of Ugi-4CRs and hydrosilylation coupling reactions, and the “monodisperse isomeric oligomers” were explored.

Light-Induced RAFT Single Unit Monomer Insertion in Aqueous Solution-Toward Sequence-Controlled Polymers

First report on the sequential, visible light-initiated, single unit monomer insertion (SUMI) of N,N-dimethylacrylamide (DMAm) into the reversible addition fragmentation chain transfer (RAFT) agent, 4-((((2-carboxyethyl)thio)carbonothioyl)thio)-4-cyanopentanoic acid (CTA₁ ), in aqueous solution is provided. The specificity for SUMI over formation of higher oligomers and/or RAFT agent-derived by-products is higher for longer irradiation wavelengths. Red light provides the cleanest product (selective SUMI), showing a linear pseudo-first order kinetic profile to high (>80%) conversion, but also the slowest reaction rate. Blue light provides a relatively rapid reaction, but also gives some by-products (<2%) and the kinetic profile displays a conversion plateau at >65% conversion. Higher specificity with red light is attributed to CTA₁ absorbing at longer wavelengths than the SUMI product, which allows selective excitation of CTA₁ . The use of a higher reaction temperature (65 °C vs ambient) results in a higher reaction rate and a reduction in oligomer formation.

Sequence-definition from controlled polymerization: the next generation of materials

An overview is given on the state-of-the-art in synthesis of sequence-controlled and sequence-defined oligomers and polymers.

Metal Free Reversible-Deactivation Radical Polymerizations: Advances, Challenges, and Opportunities

A considerable amount of the worldwide industrial production of synthetic polymers is currently based on radical polymerization methods. The steadily increasing demand on high performance plastics and tailored polymers which serve specialized applications is driven by the development of new techniques to enable control of polymerization reactions on a molecular level. Contrary to conventional radical polymerization, reversible-deactivation radical polymerization (RDRP) techniques provide the possibility to prepare polymers with well-defined structures and functionalities. The review provides a comprehensive summary over the development of the three most important RDRP methods, which are nitroxide mediated radical polymerization, atom transfer radical polymerization and reversible addition fragmentation chain transfer polymerization. The focus thereby is set on the newest developments in transition metal free systems, which allow using these techniques for biological or biomedical applications. After each section selected examples from materials synthesis and application to biomedical materials are summarized.

RAFT polymerization to form stimuli-responsive polymers

Stimuli-responsive polymers respond to a variety of external stimuli, which include optical, electrical, thermal, mechanical, redox, pH, chemical, environmental and biological signals. This paper is concerned with the process of forming such polymers by RAFT polymerization.

RAFT-mediated, visible light-initiated single unit monomer insertion and its application in the synthesis of sequence-defined polymers

In this communication, we report a catalyst-free methodology for single unit monomer insertion (SUMI) into reversible addition–fragmentation chain transfer (RAFT) agents initiated by low intensity visible light.

Sequence-regulated vinyl copolymers with acid and base monomer units via atom transfer radical addition and alternating radical copolymerization

Sequence-regulated vinyl copolymers with acid and base monomer units were prepared via atom transfer radical addition and alternating radical copolymerization.

Monomer Sequence Regulation in Main and Side Chains of Vinyl Copolymers: Synthesis of Vinyl Oligomonomers via Sequential Atom Transfer Radical Addition and Their Alternating Radical Copolymerization

We propose a novel strategy of monomer sequence regulation in main and side chains of vinyl copolymers using sequential atom transfer radical addition (ATRA) for maleimide-ended sequence-regulated vinyl "oligomonomers" and their alternating radical copolymerization with styrene. To establish this strategy, a series of sequence-regulated vinyl oligomers were prepared by the ATRA of styrene (S) or methyl acrylate (A) to a halide-possessing A or S unit (methyl α-bromopropionate or 1-phenylethylhalide). The obtained halide-ended sequence-regulated vinyl oligomers were converted into maleimide-ended oligomonomers by S_N2 reaction with the potassium salt of furan-protected maleimide (M) followed by deprotection. The maleimide-ended oligomonomers were then radically copolymerized with styrene in an alternating fashion to result in sequence-regulated vinyl copolymers consisting of a controlled monomer sequence (SA, AS, AA, and SS) in the side chain and an alternating sequence (MS) in the main chain. The solubility of the copolymers depended on not only the monomer composition but also the sequence of the side chains, whereas the thermal properties were negligibly affected by the side-chain monomer sequences.

Some aspects of radical chemistry in the assembly of complex molecular architectures

This review article describes briefly some of the radical processes developed in the authors' laboratory as they pertain to the concise assembly of complex molecular scaffolds. The emphasis is placed on the use of nitrogen-centred radicals, on the degenerate addition-transfer of xanthates, especially on its potential for intermolecular carbon-carbon bond formation, and on the generation and capture of radicals through electron transfer processes.