A turn-on and reversible fluorescence sensor with high affinity to Zn2+ in aqueous solution

Turn-on detection of Al3+ ions using quinoline-based tripodal probe: mechanistic investigation and live cell imaging applications

In this study, an easily synthesizable Schiff base probe TQSB having a quinoline fluorophore is demonstrated as a fluorescent and colorimetric turn-on sensor for Al3+ ions in a semi-aqueous medium (CH3CN/water; 4 : 1; v/v). Absorption, emission and colorimetric studies clearly indicated that TQSB exhibited a high selectivity toward Al3+, as observed from its excellent binding constant (Kb = 3.8 × 106 M-1) and detection limit (7.0 nM) values. TQSB alone was almost non-fluorescent in nature; however, addition of Al3+ induced intense fluorescence at 414 nm most probably due to combined CHEF (chelation-enhanced fluorescence) and restricted PET effects. The sensing mechanism was established via Job's plot, NMR spectroscopy, ESI-mass spectrometry, and density functional theory (DFT) analyses. Furthermore, to evaluate the applied potential of probe TQSB, its sensing ability was studied in real samples such as soil samples and Al3+-containing Digene gastric tablets as well as on low-cost filter paper strips. Fluorescence microscopy imaging experiments further revealed that TQSB can be used as an effective probe to detect intracellular Al3+ in live cells with no cytotoxicity.

A selective colorimetric chemosensor for detecting Ni(II) in aqueous solutions based on 4-[{[4-(3-chlorophenyl)-1,3-thiazol-2-yl]hydrazono}methyl]phenyl 4-methyl benzene sulfonate (CTHMBS)

Among the toxic heavy metals, Ni(II) can cause a variety of side effects on human health, such as allergy, cardiovascular and kidney diseases, lung fibrosis, lung, and nasal cancer. It is therefore critical from a public health and environmental perspective to determine and monitor Ni(II) ions in drinking water, foods, and environmental samples. In this study, a novel selective chemosensor (4-[{[4-(3-Chlorophenyl)-1,3-Thiazol-2-yl]Hydrazono}Methyl]phenyl4-methylBenzene Sulfonate (CTHMBS) was developed for the colorimetric detection of Ni(II) in aqueous medium. The presence of Ni(II) led to a distinct naked-eye color change from yellow to reddish-brown in aqueous solution. To examine the binding mechanism of CTHMBS to Ni(II), UV-vis spectroscopy analysis and DFT calculations were conducted. The detection limit of CTHMBS for Ni(II) was 11.87 µM, and the sensing ability of CTHMBS for Ni(II) was successfully carried out in real water samples.

A simple 'turn-on' fluorescence chemosensor for Al(iii) detection in aqueous solution and solid matrix

A simple fluorescence chemosensor of FHS-OH based on salicylaldehyde Schiff base was developed via a one-step reaction, which achieved a fast and highly selective response for Al(iii). Mechanism studies showed that when FHS-OH was exposed to Al(iii) with 1 : 2 binding stoichiometry in an aqueous solution at neutral pH, C[double bond, length as m-dash]N isomerization and PET processes were limited, resulting in a 'turn-on' fluorescence response with a low detection limit of 63 nmol L-1 and a satisfying linear range of 0.0-20.0 μmol L-1. Compared to traditional detection methods for Al(iii), fluorometry using FHS-OH has several advantages, including simplicity, quick response, and capability of real-time detection. More importantly, the detection of Al(iii) on a solid matrix (test paper) was successfully achieved. After the addition of Al(iii), a significant emission colour change from green to bright blue was observed by the naked eye owing to the intrinsic aggregation-induced emission (AIE) characteristic of FHS-OH.

A "Turn-On" fluorescent probe for detection and removal of Zn2+ in aqueous and its application in living cells

Using 3-hydroxy-2-naphthoic acid hydrazine and 4-(diethylamino) salicylaldehyde. as raw materials, compound L with an acylhydrazones structure was synthesized. The structure of compound L was characterized by nuclear magnetic resonance spectroscopy, X-ray single crystal diffraction, Fourier transform infrared spectroscopy, and mass spectrometry. The results show that Compound L can quickly and selectively recognize zinc ions in the H₂O/DMSO (V:V = 3:7) solvent system. After that, the spectral performance of probe L was studied by fluorescence spectroscopy and UV-vis spectroscopy. The results show that the combination with Zn²⁺ can significantly enhance the fluorescence intensity of probe L while being almost unaffected by other coexisting ions. After that, Job's curve method, nuclear magnetic titration analysis, and mass spectrometry were used to study the binding mechanism of probe L and Zn²⁺. The results showed that probe L coordinated with Zn²⁺ is 1:1. The linear equations of different concentrations of Zn²⁺ and fluorescence intensity were obtained by fitting, and the detection limit of probe L for Zn²⁺ was determined to be 6.75 × 10^-9 mol/L. The experimental study of standard addition and recovery showed that probe L could be used for the quantitative detection of Zn²⁺ in natural water samples. After that, we prepared L-doped sodium alginate hydrogel (SAL). The research results show that SAL has obvious adsorption capacity for Zn²⁺ in solution, and the color change before and after adsorption can be easily distinguished by the naked eye under ultraviolet light. SEM-EDS study showed that the microscopic morphology and composition of SAL changed significantly before and after adsorption. This fluorescent probe can be used for detection and removal of Zn²⁺ in aqueous solution. Also, probe L is effective for sensing for zinc (II) in living tumor cells. Overall, this work allows us to obtain a great potential to be applied to detect and remove Zn²⁺.

Two near-infrared fluorescent probes based on dicyanoisfluorone for rapid monitoring of Zn2+and Pb2

Zinc (Zn2+) and lead (Pb2+) ions in the environment have important effects on human health and environmental safety. Therefore, it is of great significance to realize convenient and reliable detection of these two metal ions. In this study, two near-infrared fluorescent probes for the fast detection of Zn2+ and Pb2+ were synthesized by a simple Schiff base reaction between the dicyanoisophorone skeleton and carbohydrazide derivatives. Among them, the probe with the thiophene-2-carbohydrazide group showed a selective fluorescence response to Zn2+ and Pb2+ with a maximum emission wavelength of 670 nm. And the detection limits of the probe for Zn2+ and Pb2+ were 1.59 nM and 1.65 nM, respectively. In contrast the probe modified by the furan-2-carbohydrazide group achieved quantitative detection of Zn2+, with a detection limit of 2.7 nM. These results were attributed to the fact that the probes bind to Zn2+ and Pb2+ in stoichiometric ratios of 1:1, blocking the intramolecular PET effect. Furthermore, these two probes can be recycled through the action of EDTA and have been successfully used to detect Zn2+ and Pb2+ in real water samples.

Low Molecular Weight Probe for Selective Sensing of PH and Cu2+ Working as Three INHIBIT Based Digital Comparator

A novel simple molecular chemosensor 2 was synthesized and examined for pH, cations and anions detection. At pH values higher than 10, probe 2 switches on a green emission where the excited state intramolecular proton transfer (ESIPT) is ceased. Also, the probe absorption spectrum shows a clear pH dependence, and the probe aqueous solution (ethanol/water = 1:2, borate buffer) responds selectively and sensitively through its fluorescence spectrum to the presence of Cu²⁺. Job's plot gave a 2:1 stoichiometry of Probe-2/Cu²⁺ complex, which responds to the presence of S^2- and H₂PO₄^- in aqueous solution (ethanol/water = 1:2, borate buffer) by its absorption and fluorescence spectra. In addition, probe 2 mimics a digital comparator based on three INHIBIT logic gates by different outputs using HO^- and H⁺ as inputs. Moreover, probe 2 also executes AND and NOT TRANSFER logic gates using Cu²⁺ and S^2- as inputs.

3-Hydroxyflavone derivatives: promising scaffolds for fluorescent imaging in cells

As a typical class of excited-state intramolecular proton transfer (ESIPT) molecules, 3-hydroxyflavone derivatives (3HF, also known as flavonols) have received much attention recently. Thereinto, the role of hydrophobic microenvironment is significant importance in promoting the process and effects of ESIPT, which can be regulated by the solvents, the existence of metal ions and proteins rich with α-helix structures or the advanced DNA structures. Considering that plenty of biological macromolecules offer cellular hydrophobic microenvironment, enhancing the ESIPT effects and resulting in dual emission, 3HF could be a promising scaffold for the development of fluorescent imaging in cells. Furthermore, as the widespread occurance of compounds with biological activity in plants, 3HF derivatives are much more secure to be cellular diagnosis and treatment integrated fluorescent probes. In this review, multiple regulatory strategies for the fluorescence emission of 3HF derivatives have been collectively and comprehensively analyzed, including the solvent effects, metal chelation, interaction with proteins or DNAs, which would be beneficial for ESIPT-promoting or ESIPT-blocking processes and then enhance or control the fluorescence emission of 3HF effectively. We expect that this review would provide a new perspective to develop novel 3HF-based fluorescent sensors for imaging in cells and plants.

A naphthyl thiourea-based effective chemosensor for fluorescence detection of Ag+ and Zn2

A naphthyl thiourea-based effective chemosensor HNC, (E)-2-(2-hydroxy-3-methoxybenzylidene)-N-(naphthalen-1-yl)hydrazine-1-carbothioamide, was synthesized. HNC showed quick responses toward Ag⁺ and Zn²⁺ through marked fluorescence turn-on in different solvent conditions, respectively. Binding proportions of HNC to Ag⁺ and Zn²⁺ were found to be 2:1 and 1:1, respectively. Detection limits of HNC for Ag⁺ and Zn²⁺ were calculated as 3.82 and 0.21 μM. Binding processes of HNC for Ag⁺ and Zn²⁺ were represented using Job's plot, DFT, ¹ H NMR titration, and ESI-MS.

Low Molecular Weight Fluorescent Probes (LMFPs) to Detect the Group 12 Metal Triad

Fluorescence sensing, of d-block elements such as Cu2+, Fe3+, Fe2+, Cd2+, Hg2+, and Zn2+ has significantly increased since the beginning of the 21st century. These particular metal ions play essential roles in biological, industrial, and environmental applications, therefore, there has been a drive to measure, detect, and remediate these metal ions. We have chosen to highlight the low molecular weight fluorescent probes (LMFPs) that undergo an optical response upon coordination with the group 12 triad (Zn2+, Cd2+, and Hg2+), as these metals have similar chemical characteristics but behave differently in the environment.

A facile strategy for achieving high selective Zn(II) fluorescence probe by regulating the solvent polarity

A simple Schiff base comprised of tris(2-aminoethyl)amine and salicylaldehyde was designed and synthesized by one-step reaction. Although this compound has poor selectivity for metal ions in acetonitrile, it shows high selectivity and sensitivity detection for Zn(II) ions through adjusting the solvent polarity (the volume ratio of CH₃CN/H₂O). In other words, this work provides a facile way to realize a transformation from poor to excellent feature for fluorescent probes. The bonding mode of this probe with Zn(II) ions was verified by ¹H NMR and MS assays. The stoichiometric ratio of the probe with Zn(II) is 1:1 (mole), which matches with the Job-plot assay. The detection limitation of the probe for Zn(II) is up to 1 × 10^-8 mol/L. The electrochemical property of the probe combined with Zn(II) was investigated by cyclic voltammetry method, and the result agreed with the theoretical calculation by the Gaussian 09 software. The probe for Zn(II) could be applied in practical samples and biological systems. The main contribution of this work lies in providing a very simple method to realize the selectivity transformation for poor selective probes. The providing way is a simple, easy and low-cost method for obtaining high selectively fluorescence probes.

Terpyridine derivatives as “turn-on” fluorescence chemosensors for the selective and sensitive detection of Zn2+ ions in solution and in live cells

A terpyridine based compound L1 was designed and synthesized as an “off–on” chemosensor for the detection of Zn²⁺.

Highly selective and sensitive colorimetric chemosensor for detection of Co2+ in a near-perfect aqueous solution

An outstanding colorimetric chemosensor was developed to selectively detect Co²⁺ with the lowest detection limit through the color change from colorless to yellow.

A highly sensitive benzimidazole-based chemosensor for the colorimetric detection of Fe(ii) and Fe(iii) and the fluorometric detection of Zn(ii) in aqueous media

A selective chemosensor 1 was developed for the colorimetric detection of Fe^2+/3+ and the fluorescent detection of Zn²⁺ in aqueous solution.

A highly selective fluorescent sensor for Al3+ based on a new diarylethene with a 3-hydroxy-2-naphthohydrazide unit

A novel diarylethene with a 3-hydroxy-2-naphthohydrazide unit was synthesized. It exhibited multi-responsive properties when triggered by lights, base/acid and metal ions. Moreover, the diarylethene could be used as a fluorescent sensor for Al³⁺.

β-Hydroxy-α-naphthaldehyde [2-(quinolin-8'-yloxy) acetyl] hydrazone as an efficient fluorescent chemosensor for Mg2+

An efficient fluorescent sensor based on β-hydroxy-α-naphthaldehyde [2-(quinolin-8'-yloxy) acetyl] hydrazone (HL) for Mg2+ has been designed and synthesized. The receptor showed "off-on" fluorescent responses toward Mg2+ in acetonitrile. The reasons for this phenomenon is that the addition of Mg2+ to the solution of HL induce the formation of a 1:1 ligand-metal complex which inhibit excited-state intramolecular proton transfer (ESIPT).

Optical sensor: a promising strategy for environmental and biomedical monitoring of ionic species

In this review, we cover the recent developments in fluorogenic and chromogenic sensors for Cu²⁺, Fe²⁺/Fe³⁺, Zn²⁺and Hg²⁺.

A highly selective fluorescent chemosensor based on a quinoline derivative for zinc ions in pure water

A water-soluble fluorescent sensor with a low detection limit could be used to detect and quantify Zn²⁺in water samples.