Application of new approaches to liquid-phase microextraction for the determination of emerging pollutants

Development of In-Needle SPME Devices for Microextraction Applied to the Quantification of Pesticides in Agricultural Water

The chemical industry explosion in the 20th century has led to increased environmental pollution, affecting fauna, flora, and waterways. These substances alter water's taste, color, and smell, making it unfit for consumption or toxic. Agricultural water networks face threats from pollution before and after treatment. Some chemical contaminants, like pesticides, are embedded in natural biogeochemical cycles. In this study, we developed a simple and low-cost procedure for the fabrication of needles coated with polydimethylsiloxane (PDMS) as an efficient sorbent for the microextraction of organic pollutant traces from water. The prepared needles were used as an alternative for commercial solid-phase micro-extraction (SPME) devices in analytical chemistry. The PDMS polymeric phase was characterized by Fourier-transform infrared spectroscopy (FT-IR), thermogravimetry (TGA), and scanning electron microscopy (SEM). The PDMS-coated needles were used for extraction of thirteen pesticides by direct-immersion solid-phase microextraction (DI-SPME) from contaminated waters, followed by determination with gas chromatography-mass spectrometry (GC-MS). The developed analytical method showed limits of detection (LODs) between 0.3 and 2.5 ng mL-1 and RSDs in the range of 0.8-12.2%. The homemade needles were applied for the extraction of pesticides in surface and ground aqueous samples collected from an agricultural area. Several target pesticides were identified and quantified in the investigated water samples.

End-to-End Automated Synthesis of C(sp3)-Enriched Drug-like Molecules via Negishi Coupling and Novel, Automated Liquid-Liquid Extraction

Herein, we report an end-to-end process including synthesis, work-up, purification, and post-purification with minimal human intervention using Negishi coupling as a key transformation to increase Fsp3 in bioactive molecules. The main advantages of this protocol are twofold. First, the automated sequential generation of organozinc reagents from readily available alkyl halides offers a large diversity of alkyl groups to functionalize (hetero)aryl halide scaffolds via Pd-catalyzed Negishi coupling in continuous flow. Second, a fully automated liquid-liquid extraction has been developed and successfully applied for unattended operations. The workflow was completed with mass-triggered preparative high-performance liquid chromatography HPLC, providing an efficient production line of compounds with enriched sp3 character and better drug-like properties. The modular nature allows a smooth adaptation to a wide variety of synthetic methods and protocols and makes it applicable to any medchem laboratory.

Multiwalled Carbon Nanotubes Embedded in a Polymeric Matrix as a New Material for Thin Film Microextraction (TFME) in Organic Pollutant Monitoring

It is essential to monitor organic pollutants to control contamination levels in environmental water bodies. In this respect, the development of new materials based on functionalised polymeric films for the measurement of toxic compounds is of interest. In this study, we prepare new films based on polymer cellulose triacetate modified with multi-walled carbon nanotubes for the monitoring of selected compounds: a fungicide (chlorpyrifos) and two emerging contaminants, the musk tonalide and the bactericide triclosan, which are used in the formulation of personal care products. The films, upon contact with water samples and following the principles of thin film microextraction, allow the determination of organic pollutants at low concentration levels. The contact time of the film with a predetermined volume of water is fixed at 60 min, and the compounds are eluted with a small volume (1 mL) of organic solvent for GC-MS analysis. Parameters such as repeatability for different films and detection limits are found to be satisfactory. Applying the method to river water demonstrates its suitability and, in the cases of chlorpyrifos and tonalide, the absence of a significant matrix effect.

Trends in hollow fibre liquid phase microextraction for the preconcentration of pharmaceutically active compounds in aqueous solution: A case for polymer inclusion membrane

Low concentrations of pharmaceutically active compounds have been reported in samples from highly complex aqueous environments. Due to their low concentrations, efficient sample pretreatment methods are needed to clean samples and concentrate the compounds of interest prior to instrumental analysis. Hollow fibre liquid-phase microextraction (HF-LPME) is an effective alternative to conventional techniques such as liquid-liquid extraction (LLE) and solid phase extraction (SPE) because it consumes less organic solvent and is less labour intensive with a short extraction time. HF-LPME involves the preconcentration and mass transfer of target analytes from an aqueous sample into an acceptor solution in the lumen of the fibre using a supported liquid membrane (SLM) impregnated in the hollow fibre pores. However, despite the high contaminant selectivity, reproducibility, and enrichment that HF-LPME offers, this technique is limited by membrane instability. Although several advances have been made to address membrane instability, they are either too costly or not feasible for industrial application. Hence, hollow fibre polymer inclusion membrane liquid-phase microextraction (HF-PIM-LPME) was introduced to ameliorate membrane instability. This new approach uses ionic liquids (ILs) as a green solvent, and has demonstrated high membrane stability, good contaminant enrichment, and similar selectivity and reproducibility to HF-SLM-LPME. Hence, this review aims to raise awareness of HF-PIM-LPME as a viable alternative for the selectivity and preconcentration of pharmaceuticals and other contaminants in aquatic environments.

Advances in pretreatment and analysis methods of aromatic hydrocarbons in soil

Benzene compounds that are prevalent in the soil as organic pollutants mainly include BTEX (benzene, toluene, ethylbenzene, and three xylene isomers) and PAHs (polycyclic aromatic hydrocarbons). These pose a severe threat to many aspects of human health. Therefore, the accurate measurement of BTEX and PAHs concentrations in the soil is of great importance. The samples for analysis of BTEX and PAHs need to be suitable for the various detection methods after pretreatment, which include Soxhlet extraction, ultrasonic extraction, solid-phase microextraction, supercritical extraction, and needle trap. The detection techniques mainly consist of gas chromatography (GC), mass spectrometry (MS), and online sensors, and provide comprehensive information on contaminants in the soil. Their performance is evaluated in terms of sensitivity, selectivity, and recovery. Recently, there has been rapid progress in the pretreatment and analysis methods for the quantitative and qualitative analyses of BTEX and PAHs. Therefore, it is necessary to produce a timely and in-depth review of the emerging pretreatment and analysis methods, which is unfortunately absent from the recent literature. In this work, state-of-art extraction techniques and analytical methods have been summarized for the determination of BTEX and PAHs in soil, with a particular focus on the potential and limitations of the respective methods for different aromatic hydrocarbons. Accordingly, the paper will describe the basic methodological knowledge, as well as the recent advancement of pretreatment and analysis methods for samples containing BTEX and PAHs.

Separation of Some Anionic Dyes Using Reverse Micelles of CTAB and SDS as Efficient Surfactants Adsorbents from Aqueous Medium

Extractive removal of anionic dyes, namely, Color Index (CI) Reactive Blue 222 and Reactive Yellow 145, using reverse micelles based on liquid-liquid extraction (LLE) was carried out from aqueous solutions using different anionic and cationic surfactants (e.g., sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), resp.), which dissolved in ethyl acetate as solvent. The reverse micelle principal acts on the dye encapsulated in the solvent in an aqueous micropool. The experiments were carried out by mixing in a simple mixer a given amount of dyes and surfactants dissolved in a solvent in an aqueous process. Due to gravity, the dye is separated from water after the solvent phase is separated from the aqueous phase, including dye encapsulated in reverse micelles. Under various experimental conditions, extraction efficiency was studied, including solution pH, extraction time, initial dye concentration, extractant concentration, temperature, stripping agent, and solvent reusability. Dyes extracted were stripped quantitatively with NaOH solution. Recovery of the solvent and the reuse of dyes and surfactants after extraction of dye molecules from reverse micelles surfactant core considered are very important from an economic point of view. The optimized conditions were 7 ± 0.2 solution pH, 9 × 10−2 mol/L extractant concentration, 1M NaOH stripping agent concentration, 60 min extraction time, 6 × 10−5 mol/L dye concentration, and 1 : 1 aqueous to organic (A/O) ratio. 87–93% of dyes were extracted at experimental optimum conditions.

Determination of multiple organic flame retardants in maricultural water using High-volume/High-throughput Solid-phase extraction followed by liquid/gas chromatography tandem mass spectrometry

A rapid and efficient analytical method is proposed and optimized for the enrichment, extraction and instrument analysis of four typical organic flame retardants (OFRs), including organophosphate esters (OPEs), polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCDs) and dechlorane compounds (Dechloranes) in maricultural waters using High-volume/High-throughput Solid-phase extraction with in-situ ultrasonic technique followed by high performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS) and gas chromatography tandem mass spectrometry (GC-MS) instrumental detection. The optimized pretreatment conditions were that the analytes were enriched by XAD-2 resins and eluted repeatedly with 50 mL hexane/acetone (1:1, v:v) for 5 min. The results of method validation exhibited that the developed method can be used for quantitative detection of 11 OPEs, 13 PBDEs, 3 HBCDs and 5 Dechloranes in water samples. The method detection limits (MDLs) and limits of quantification (LOQs) are 0.4-26.2 pg/L and 1.5-87.4 pg/L for OPEs, 23.3-35.4 pg/L and 77.5-117.9 pg/L for HBCDs, 0.8-97.4 pg/L and 2.6-324.7 pg/L for PBDEs and 9.3-78.5 pg/L and 31.0-261.8 pg/L for Dechloranes, respectively. The method was successfully applied in lagoon maricultural areas in Hainan province, and the results showed that 4 OFRs were detected in almost all water samples. Total concentrations of 18 water samples were 1.89-39.97 ng/L for OPEs, 0.18-5.40 ng/L for PBDEs, ND-0.24 ng/L for HBCDs and 0.01-1.77 ng/L for Dechloranes, respectively. The optimized analytical method is highly sensitive and efficient with expectation to play an essential role in monitoring the ultra-trace organic pollutants and providing an effective risk assessment in ecological environment.

Recent sample pretreatment methods for determination of selective serotonin reuptake inhibitors (SSRIs) in biological samples

Selective serotonin reuptake inhibitors (SSRIs) such as fluoxetine (FLU), sertraline (SER), paroxetine (PAR), fluvoxamine (FLV) and citalopram (CIT) have been the first treatment drugs for pregnant and breastfeeding women. Quantitative analysis of SSRIs in biological samples is extremely needed in public health and clinical practice. During the analysis, sample pretreatment is an important step that can obtain an accurate quantitative analysis of SSRIs in the complex samples. The present paper discussed the recent development of sample preparation methods for SSRI analysis. Traditional sample preparation techniques such as liquid liquid extraction (LLE) and solid phase extraction (SPE), which have been widely used in the separation of SSRIs in biological samples, were extensively presented. Moreover, the new sample preparation techniques including liquid phase microextraction (LPME), solid phase microextraction (SPME), electromembrane extraction (EME) and other miniaturized extraction techniques, which are becoming highly popular in SSRI analysis, were also critically reviewed. In this review, both the advantages and disadvantages of these sample pretreatment methods were addressed. As a summary, we prospected the challenges and promising directions for the future of sample pretreatment methods in SSRI analysis.

Automated liquid-liquid extraction of organic compounds from aqueous samples using a multifunction autosampler syringe

Liquid-liquid extraction is one of the most widely used and simplest sample preparation techniques. However, consumption of large volumes of organic solvent and manual handling are two major drawbacks of this technique. A multifunction autosampler syringe is introduced which permits automated liquid-liquid extraction in an enclosed operating environment, with low consumption of organic solvents. The device described herein features a micromixer function in addition to common autosampler syringe features like accurate and precise aspirating and dispensing. To test the functionality of the micromixer syringe, manual extraction of caffeine from a tea infusion and semi-automated extraction of dichloroethane from water were carried out. Excellent recoveries of caffeine from a tea infusion (89% recovery with 1.3% RSD) and dichloroethane from water (107% recovery with 10% RSD) were obtained. Two automated workflows were tested using the micromixer syringe mounted in a laboratory autosampler. Standalone automated micro liquid-liquid extraction was performed for sample preparation of selected polychlorinated biphenyl (PCB) congeners prior to comprehensive two-dimensional gas chromatography - electron capture detection analysis. Extraction of PCBs using the described approach used substantially less solvent than a validated solid-phase extraction approach whilst delivering equivalent results for samples with high-level PCBs. Finally, fully automated extraction and GC-MS analysis of polynuclear aromatic hydrocarbons (PAHs) from water samples was performed. Mean recoveries of extraction for PCB and PAH analysis were > 70% using 4 min automated liquid-liquid extractions.

Bioanalytical methodologies for clinical investigation of endocrine-disrupting chemicals: a comprehensive update

Endocrine-disrupting chemicals (EDCs) are xenobiotics that disrupt the endocrine system in humans at ecologically significant concentrations. Various substances are exposed to human health via routes including food, water, air and skin that result in disastrous maladies at low doses as well. Therefore EDCs need a meticulous strategy of analysis for dependable and consistent monitoring in humans. The management and risk assessment necessitate advancements in the detection methodologies of EDCs. Hyphenated MS-based chromatograph and other validated laboratory analysis methods are widely available and employed. Besides, in vitro bioassay techniques and biosensors are also used to conduct accurate toxicological tests. This article provides a revision of various bioanalytical detection methods and technologies for the clinical estimation of EDCs.

A rapid and simple method for the removal of dyes and organophosphorus pesticides from water and soil samples using deep eutectic solvent embedded sponge

A new treatment method using a deep eutectic solvent embedded melamine sponge (DES-MS) was studied for the removal of organic pollutants from water and soil samples. Five organophosphorus pesticides (OPPs) consisting of azinphos-methyl (AZP), parathion-methyl (PRT), fenitrothion (FNT), diazinon (DIZ) and chlorpyrifos (CPF), and two dyes including acid blue 29 (AB29) and malachite green (MG) were used as the model pollutants. DESs were easily prepared from tetrabutylammonium bromide (TBABr) and various fatty acids. The synthesised DESs were loaded into the sponge before being utilized for the removal of the studied pollutants. After the removal, the residual OPPs or dyes in the supernatant was quantified by high performance liquid chromatography or derivative spectrophotometry, respectively. The proposed method was simple, rapid, environmentally friendly and effective with the removal efficiency higher than 70% for various samples. Moreover, the removal of various dyes was successfully achieved with the efficiency greater than 65% under the optimum condition.

Application of Hollow Fibre-Liquid Phase Microextraction Technique for Isolation and Pre-Concentration of Pharmaceuticals in Water

In this article, a comprehensive review of applications of the hollow fibre-liquid phase microextraction (HF-LPME) for the isolation and pre-concentration of pharmaceuticals in water samples is presented. HF-LPME is simple, affordable, selective, and sensitive with high enrichment factors of up to 27,000-fold reported for pharmaceutical analysis. Both configurations (two- and three-phase extraction systems) of HF-LPME have been applied in the extraction of pharmaceuticals from water, with the three-phase system being more prominent. When compared to most common sample preparation techniques such as solid phase extraction, HF-LPME is a greener analytical chemistry process due to reduced solvent consumption, miniaturization, and the ability to automate. However, the automation comes at an added cost related to instrumental set-up, but a reduced cost is associated with lower reagent consumption as well as shortened overall workload and time. Currently, many researchers are investigating ionic liquids and deep eutectic solvents as environmentally friendly chemicals that could lead to full classification of HF-LPME as a green analytical procedure.

Removal of Cadmium (II) using water hyacinth (Eichhornia crassipes) biochar alginate beads in aqueous solutions

Biochar produced from water hyacinths (Eichhornia crassipes) has been demonstrated to be an effective adsorbent for the removal of certain heavy metals and as a means of control for this highly invasive species. This study involved examined the Cd²⁺ sorption dynamics of an alginate encapsulated water hyacinth biochar (BAC) generated at different temperatures and modified using ferric/ferrous sulfate (MBAC). The maximum Cd²⁺ sorption occurred at a pH of 6 and at a solution temperature of 37 °C. Sorption equilibria for the biochar-alginate capsule (BAC) and modified biochar-alginate capsule (MBAC) treatments fit both the Langmuir (R² = 0.876 to 0.99) and Freundlich (R² = 0.849 to 0.971) equations. Langmuir isotherms had a better fit than the Freundlich isotherms, with maximum sorption capacities ranging from 24.2 to 45.8 mg Cd²⁺ g^-1. Larger K_L values in Freundlich modeling suggest strong bonding of the BAC and MBAC sorbents to Cd²⁺, with values of K_L in the MBAC treatments ranging between 31 and 178% greater than the BAC treatments. Cd²⁺ sorption followed pseudo first-order kinetics (R² = 0.926 to 0.991) with greater efficiency of removal using treatments with biochar generated at temperatures >500 °C. Results from this study highlight the potential for biochar-alginate capsules derived from water hyacinth to be effective for the removal of Cd²⁺ from wastewaters.

Direct immersion single-drop microextraction of semi-volatile organic compounds in environmental samples: A review

Single-drop microextraction (SDME) techniques are efficient approaches to pretreatment of aqueous samples. The main advantage of SDME lies in the miniaturization of the solvent extraction process, minimizing the hazards associated with the use of toxic organic solvents. Thus, SDME techniques are cost-effective, and represent less harm to the environment, subscribing to green analytical chemistry principles. In practice, two main approaches can be used to perform SDME - direct immersion (DI)-SDME and headspace (HS)-SDME. Even though the DI-SDME has been shown to be quite effective for extraction and enrichment of various organic compounds, applications of DI-SDME are normally more suitable for moderately polar and non-polar semi-volatile organic compounds (SVOCs) using organic solvents which are immiscible with water. In this review, we present a historical overview and current advances in DI-SDME, including the common analytical tools which are usually coupled with DI-SDME. The review also focuses on applications concerning SVOCs in environmental samples. Currents trends in DI-SDME and possible future direction of the procedure are discussed.

A polymeric solid-phase microextraction fiber for the detection of pharmaceuticals in water samples

A novel disposable styrene based solid-phase microextraction (SPME) fiber was synthesized for the detection of lipid-lowering and antihypertensive drugs in real aquatic environment. Styrene and poly(ethylene glycol) diacrylate were co-polymerized on quartz fibers by thermal polymerization in capillary molds. The polymeric fiber possessed a homogeneous, dense as well as porous surface, showing excellent chemical and mechanical stability. The performance of the fiber was evaluated through the extraction of seven pharmaceuticals by coupling SPME with high performance liquid chromatography-tandem mass spectrometry under the optimized extraction conditions. The extraction efficiency of the fiber was up to 278 times of PDMS fiber and the enrichment factors ranged from 55 to 1183. The limits of detection were in the range from 1.7 ng L^-1 to 11.7 ng L^-1, with good reproducibility. Moreover, the fiber was used in the real water samples of the Pearl River Delta. The recoveries of the target analytes from river water and sea water samples at different spiked concentrations were in the range from 84.1% to 133.4% and from 81.5% to 105.5%, respectively.

Development of Micellar HPLC-UV Method for Determination of Pharmaceuticals in Water Samples

Method for extraction and determination of amoxicillin, caffeine, ciprofloxacin, norfloxacin, tetracycline, diclofenac, ibuprofen, nimesulide, levonorgestrel, and 17α-ethynylestradiol exploiting micellar liquid chromatography with PDA detector and solid-phase extraction was proposed. The usage of toxic solvents was low; the chromatographic separation of the medicaments was performed using a C18 column and mobile phases A and B containing 15.0% (v/v) ethanol, 3.0% (m/v) sodium dodecyl sulfate (SDS), and 0.02 mol·L^-1 phosphate at pHs 7.0 and 8.0, respectively. The method is simple, selective, and fast, and the analytes were separated in 23.0 min. For extraction, 1000 mL of sample containing 2.0% (v/v) ethanol and 0.002 mol·L^-1 citric acid at pH 2.50 was loaded through a 1000 mg of C18 cartridge. The analytes were eluted using 3.0 mL of ethanol, which were evaporated and redissolved in 0.5 mL of mobile phase. Concentration factors better than 1200, except amoxicillin (224), were obtained. The analytical curves were linear (R² better than 0.992); LOD and LOQ (n=10) presented values in the range of 0.019-0.247 and 0.058-0.752 mg·L^-1, respectively. Recoveries of 99% were obtained, and the results are in agreement with those obtained by the comparative methods.

Hollow-Fibre-Supported Dispersive Liquid-Liquid Microextraction for Determination of Atrazine and Triclosan in Aqueous Samples

We report the application of the dispersive liquid-liquid microextraction coupled to hollow-fibre membrane-assisted liquid-phase microextraction and its application for extraction of atrazine and triclosan. Under optimum conditions, namely, 25 μL of a 1 : 4 chlorobenzene : ethyl acetate mixture dispersed in 1 mL of aqueous sample, 10% (m/v) NaCl, a magnetic stirrer speed at 600 rpm, and 10 minutes' extraction time with toluene-filled fibre as the acceptor phase, the method demonstrates sufficient figures of merit. These include linearity (R² ≥ 0.9975), intravial precision (%RSD ≤ 7.6), enrichment factors (127 and 142), limits of detection (0.0081 and 0.0169 µg/mL), and recovery from river water and sewerage (96–101%). The relatively high detection limits are attributed to the flame ionization detector which is less preferred than a mass spectrometer in trace analyses. This is the first report of a homogenous mixture of the dispersed organic solvent in aqueous solutions and its employment in extraction of organic compounds from aqueous solutions. It therefore adds yet another candidate in the pool of miniaturised solvent microextraction techniques.

Effervescence-assisted dispersive liquid–liquid microextraction based on the solidification of a floating ionic liquid with a special collection method for the rapid determination of benzoylurea insecticides in water samples

Dispersion liquid–liquid microextraction based on the solidification of a floating ionic liquid.

State of the art of environmentally friendly sample preparation approaches for determination of PBDEs and metabolites in environmental and biological samples: A critical review

Green chemistry principles for developing methodologies have gained attention in analytical chemistry in recent decades. A growing number of analytical techniques have been proposed for determination of organic persistent pollutants in environmental and biological samples. In this light, the current review aims to present state-of-the-art sample preparation approaches based on green analytical principles proposed for the determination of polybrominated diphenyl ethers (PBDEs) and metabolites (OH-PBDEs and MeO-PBDEs) in environmental and biological samples. Approaches to lower the solvent consumption and accelerate the extraction, such as pressurized liquid extraction, microwave-assisted extraction, and ultrasound-assisted extraction, are discussed in this review. Special attention is paid to miniaturized sample preparation methodologies and strategies proposed to reduce organic solvent consumption. Additionally, extraction techniques based on alternative solvents (surfactants, supercritical fluids, or ionic liquids) are also commented in this work, even though these are scarcely used for determination of PBDEs. In addition to liquid-based extraction techniques, solid-based analytical techniques are also addressed. The development of greener, faster and simpler sample preparation approaches has increased in recent years (2003-2013). Among green extraction techniques, those based on the liquid phase predominate over those based on the solid phase (71% vs. 29%, respectively). For solid samples, solvent assisted extraction techniques are preferred for leaching of PBDEs, and liquid phase microextraction techniques are mostly used for liquid samples. Likewise, green characteristics of the instrumental analysis used after the extraction and clean-up steps are briefly discussed.