Analytical strategies to the determination of metal-containing nanoparticles in environmental waters

A critical review on nanoplastics and its future perspectives in the marine environment

Nanoplastics (plastic particles smaller than 1 μm) are the least-known type of marine litter. Nanoplastics (NPs) have attracted much interest in recent years because of their prevalence in the environment and the potential harm they can cause to living organisms. This article focuses on understanding NPs and their fate in the marine environment. Sources of NPs have been identified, including accidental release from products or through nano-fragmentation of larger plastic debris. As NPs have a high surface area, they may retain harmful compounds. The presence of harmful additives in NPs poses unique practical challenges for studies on their toxicity. In this review, several methods specifically adapted for the physical and chemical characterization of NPs have been discussed. Furthermore, the review provides an overview of the translocation and absorption of NPs into organisms, along with an evaluation of the release of potential toxins from NPs. Further, we have provided an overview about the existing methods suggested for the possible degradation of these NPs. We conclude that the hazards of NPs are plausible but unknown, necessitating a thorough examination of NPs' sources, fate, and effects to better mitigate and spread awareness about this emerging contaminant.

A two-dimensional nanoparticle characterization method combining differential mobility analyzer and single-particle inductively coupled plasma-mass spectrometry with an atomizer-enabled sample introduction (ATM-DMA-spICP-MS): Toward the analysis of heteroaggregated nanoparticles in wastewater

Characterizing engineered nanoparticles (ENPs) in complex environmental matrices remains a challenging task. This work presents a two-dimensional size analysis method by combining differential mobility analyzer (DMA) and single-particle inductively coupled plasma-mass spectrometry (spICP-MS) with a new atomizer (ATM)-enabled sample introduction that is relatively easy to operate. The tailing of electrical mobility size distributions was solved by heating the aerosol flow, where water-shelled gold nanoparticles (AuNPs) were dehydrated, effectively eliminating the tailing. The improved method has a good sizing performance and can resolve the size fractions of mixed 30 nm and 50 nm AuNPs. It can reliably analyze 7.8 × 10⁵ to 1.9 × 10⁷ # of 50 nm AuNPs (or 4.1 × 10⁵ to 10⁷ # NPs/mL, equivalent to 0.6 to 14.3 μg Au/L) with a linear response and a limit of detection of 7.8 × 10⁵ # AuNPs (equivalent to 4.1 × 10⁵ # AuNPs/mL) that is relevant to NP concentrations in surface water and wastewater samples. The potential of this method to analyze environmental samples was demonstrated by characterizing AuNPs and silver nanoparticles (AgNPs) spiked in wastewater, where both NPs were revealed to form heteroaggregates with colloids existing in wastewater. The method can even directly analyze nanosized Ag particles inherent in the wastewater before adding external AgNPs. The result indicates that ATM-DMA-spICP-MS is a relatively simple two-dimensional size analysis method that has a great potential to characterize heteroaggregated NPs in aqueous environmental samples.

Current Methods and Prospects for Analysis and Characterization of Nanomaterials in the Environment

Analysis and characterization of naturally occurring and engineered nanomaterials in the environment are critical for understanding their environmental behaviors and defining real exposure scenarios for environmental risk assessment. However, this is challenging primarily due to the low concentration, structural heterogeneity, and dynamic transformation of nanomaterials in complex environmental matrices. In this critical review, we first summarize sample pretreatment methods developed for separation and preconcentration of nanomaterials from environmental samples, including natural waters, wastewater, soils, sediments, and biological media. Then, we review the state-of-the-art microscopic, spectroscopic, mass spectrometric, electrochemical, and size-fractionation methods for determination of mass and number abundance, as well as the morphological, compositional, and structural properties of nanomaterials, with discussion on their advantages and limitations. Despite recent advances in detecting and characterizing nanomaterials in the environment, challenges remain to improve the analytical sensitivity and resolution and to expand the method applications. It is important to develop methods for simultaneous determination of multifaceted nanomaterial properties for in situ analysis and characterization of nanomaterials under dynamic environmental conditions and for detection of nanoscale contaminants of emerging concern (e.g., nanoplastics and biological nanoparticles), which will greatly facilitate the standardization of nanomaterial analysis and characterization methods for environmental samples.

Simple Method for the Extraction and Determination of Ti-, Zn-, Ag-, and Au-Containing Nanoparticles in Sediments Using Single-Particle Inductively Coupled Plasma Mass Spectrometry

The quantitative analysis of nanoparticles (NPs) in the environment is significantly important for the exploration of the occurrence, fate, and toxicological behaviors of NPs and their subsequent environmental risks. Some protocols have been recommended for the separation and extraction of NPs that are potentially dispersed in complex environmental matrixes, e.g. sediments and soils, but they remain limited. However, certain factors that may significantly affect extraction efficiency have not been comprehensively explored. In this study, on the basis of the single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS) technique, a simple standardized protocol for separating and analyzing metal-containing NPs in sediment samples was developed. On consideration of the extraction efficiencies of indigenous NPs (Ti- and Zn-NPs) and spiked NPs (Ag- and Au-NPs) in sediments, sedimentation with a settling time of 6 h is recommended for the separation of NPs and large particles, and the optimal sediment to water ratio, ultrasonication power, time, and temperature are 0.4 mg/mL, 285 W, 20 min, and 15-25 °C, respectively. On the basis of the optimized method, the recoveries of spiked Ag and Au-NPs were 71.4% and 81.1%, respectively. The applicability of the optimal protocols was verified, and TOC was proved to be an important factor controlling the separation and extraction of NPs in environmental samples. The separation and extraction of NPs in elevated TOC samples can be improved by increasing the ultrasonication power, time, and temperature.

[Application of non-stationary phase separation hyphenated with inductively coupled plasma mass spectrometry in the analysis of trace metal-containing nanoparticles in the environment]

环境中金属纳米颗粒的分析检测不仅需要关注其浓度和化学组成,还需要对其形状、粒径和表面电荷等进行表征。此外,环境中金属纳米颗粒的分析需要解决其低赋存浓度以及复杂基质干扰的难题。无固定相分离技术与电感耦合等离子体质谱(ICP-MS)的在线联用,具有较强的颗粒分离能力和较低的元素检出限,能够快速准确地提供金属纳米颗粒的粒径分布、化学组成等信息,在金属纳米颗粒的分离检测方面表现出极大的潜能。但这一联用技术尚无法获得金属纳米颗粒物的颗粒数浓度和单个颗粒的元素信息,难以判断金属纳米颗粒涂层厚度、纯度以及颗粒的均相/异相团聚行为等。新兴的单颗粒-电感耦合等离子体质谱(SP-ICP-MS)与无固定相分离技术的在线联用,可以获得金属纳米颗粒的流体动力学粒径、元素质量计算粒径和颗粒数浓度等信息,进而弥补无固定相分离与ICP-MS在线联用技术的不足。该文介绍了流体动力色谱、毛细管电泳和场流分离3种常用无固定相分离技术的分离机制和适用检测器,着重综述了无固定相分离技术与ICP-MS/SP-ICP-MS在线联用技术的特点及其在环境金属纳米颗粒分析中的应用。关于场流分离,主要介绍了可以与ICP-MS联用的沉降场流分离和流场流分离。该文还对流体动力色谱、毛细管电泳和流场流分离与ICP-MS在线联用技术的特点进行了比较。最后,该文对无固定相分离技术与ICP-MS/SP-ICP-MS在线联用技术的发展提出了展望。

Research progress of nanoplastics in freshwater

With the mass production and use of plastic products, which leads to their continuous entry into the water environment, the problem of environmental pollution has been paid more and more attention by scholars from different countries. In recent years, a large number of studies have focused on microplastics, but few on nanoplastics (NPs). However, NPs are smaller in size, have a higher affinity for cells, and surface and volume ratios are higher than those of microplastics. NPs may also enter biological tissues, blood and cells, which may cause greater potential harm to organisms. In this paper, firstly, the environmental fate of NPs accumulation and deposition is summarized, and further research is needed in the future; secondly, the current techniques for NPs extraction and characterization of NPs extraction and characterization are summarized. At present, the analytical methods of NPs are in the primary stage, and lack of standardized and accurate methods; finally, the toxic effects of NPs on biological morphology, behavior and reproduction are discussed. It has been found that the small size and high surface area of NPs make them more toxic to organisms than microplastics. However, most of the current toxicological studies of NPs on freshwater organisms could not be simulated in real environment.

Thermodynamic Barrier for Nanoparticle Penetration into Nanotubes

It is promising yet challenging to develop efficient methods to separate nanoparticles (NPs) with nanochannel devices. Herein, in order to guide and develop the separation method, the thermodynamic mechanism of NP penetration into solvent-filled nanotubes is investigated by using classical density functional theory. The potential of mean force (PMF) is calculated to evaluate the thermodynamic energy barrier for NP penetration into nanotubes. The accuracy of the theory is validated by comparing it with parallel molecular dynamics simulation. By examining the effects of nanotube size, solvent density, and substrate wettability on the PMF, we find that a large tube, a low bulk solvent density, and a solvophilic substrate can boost the NP penetration into nanotubes. In addition, it is found that an hourglass-shaped entrance can effectively improve the NP penetration efficiency compared with a square-shaped entrance. Furthermore, the minimum separation density of NPs in solution is identified, below which the NP penetration into nanotubes requires an additional driving force. Our findings provide fundamental insights into the thermodynamic barrier for NP penetration into nanotubes, which may provide theoretical guidance for separating two components using microfluidics.

Direct solid sampling for speciation of Zn2+ and ZnO nanoparticles in cosmetics by graphite furnace atomic absorption spectrometry

The application of nanoparticles (NPs) in science and technology is a fast growing field. Therefore, reliable and straightforward analytical methods are required for their fast determination in different types of samples. This work investigates a method that enables the determination of ZnO NPs, discriminating them from ionic zinc in cosmetic samples. The method is based on direct solid sampling high-resolution continuum source electrothermal atomic absorption spectrometry (SS-HR-CS-GFAAS), and has been applied to determination of ZnO NPs, Zn²⁺ and total Zn in eye shadow samples. In this work the deconvolution of the atomization peak and the calibration by standard additions have been done in order to discriminate and quantify ionic zinc and ZnO NPs. A Zn wavelength with low sensitivity was selected. The proper optimization of the graphite furnace temperature program, minimizing the mineralization of the sample matrix, enables different atomization profiles between the different chemical species of the analyte. Two multiple response surface designs have been used in order to optimize the adequate furnace program to achieve our aims. All the optimization experiments were performed using a sample of eye shadow. Further, a method for the determination of total Zn by direct solid sampling with calibration by aqueous standards, was also optimized. The optimized method was successfully applied to the determination of ionic Zn and ZnO NPs in different eye shadow samples, and has been validated by recovery assays, obtaining recovery percentages between 80 and 125%. Total Zn concentration in the solid samples was validated by the determination of total Zn by direct solid sampling and by the analysis of the same eye shadow samples digested in microwave oven.

Development of a sequential extraction and speciation procedure for assessing the mobility and fractionation of metal nanoparticles in soils

This study describes the development of a sequential extraction procedure for the evaluation of metal nanoparticle mobility and bioaccessibility in soils. The procedure, that was developed using gold nanoparticles (AuNPs) as model species, relies on the fractionation of nanoparticles by sequentially dissolving soil matrix components (carbonates, metal oxides, organic matter and mineral phases) in order to release the entrapped nanoparticle species in the extract solution. By summing up the concentration of AuNPs recovered in each fraction it was found that 93.5% of the spiked AuNP concentration could be recovered which satisfactorily represents the nominal AuNP concentration in the soil. The efficiency of the procedure was found to depend on several procedural artifacts related to the separation of AuNPs from soil colloids and the reactivity of the extraction reagents with AuNPs and their precursor metal ions. Based on the results obtained a protocol for the speciation of the AuNPs and Au ions in the soil sample was also developed. The results of the study show that both AuNPs and Au ions are mainly associated with soil organic matter, which significantly reduces their mobility, while a small amount (<10%) is associated with metal oxides which are more mobile and potentially bioaccessible. The developed procedure provides a springboard for further development of sequential extraction procedures of metal nanoparticles in soils that could be used to assess both the exposure and release of metal nanoparticles and their precursor metal ions in the environment (as total extractable concentration) as well as provide evidence regarding their bioaccessibility and potential bioavailability by determining the concentration of nanoparticles in each specific soil fraction.

Sublethal effects of waterborne copper and copper nanoparticles on the freshwater Neotropical teleost Prochilodus lineatus: A comparative approach

Copper nanoparticles can contaminate the aquatic environment, but their effects on fish and how they may differ from copper salts is not understood. Thus, in this work we compare the sublethal effects of copper nanoparticles (nCu) and copper chloride (Cu) on the freshwater teleost Prochilodus lineatus, known for its sensitivity to copper. Juveniles (n = 8/group) were exposed to 20 μg L^-1 of copper as CuCl₂ (Cu), 40 μg L^-1 of copper nanoparticles (nCu), or only water (control), for 96 h. These concentrations were chosen to achieve similar dissolved copper concentration in both treatments (Cu: 10.29 ± 0.94 μg L^-1; nCu: 12.16 ± 1.77 μg L^-1). After the exposure, the following biological parameters were evaluated: copper accumulation in the gills, liver, gastrointestinal tract, kidney, and muscle; hematocrit (Ht) and hemoglobin content (Hb); branchial activity of Na⁺-K⁺-ATPase (NaKATP), H⁺-ATPase (HATP), Ca²⁺-ATPase (CaATP), and carbonic anhydrase (CA); glutathione content (GSH) and lipid peroxidation (LPO) in the liver; acetylcholinesterase activity (AChE) in the brain and muscle; and histopathology of the gills and liver. The gills of Cu-exposed fish were adversely affected, with increased copper content, inhibition of H⁺-ATPase and Ca²⁺-ATPase, and histological damage, including proliferation of mitochondria rich cells and/or mucous cells. In addition, LPO levels increased in the liver of Cu-exposed fish, indicating the occurrence of oxidative stress. Exposure to nCu promoted a decrease in Ht and Hb, indicating anemia, and an increase in branchial Na⁺-K⁺-ATPase and H⁺-ATPase activities, which can be an adaptive response to metabolic acidosis. Within the chosen biomarkers and the conditions tested, copper nanoparticles were less toxic than copper. However, the effects promoted by the nanoparticles were different from those promoted by copper. These results emphasize the need for a better understanding of copper nanoparticles toxicity in order to establish safe concentrations and avoid environment impacts.

Sampling and pre-treatment effects on the quantification of (nano)silver and selected trace elements in surface water - Application in a Dutch case study

Detection and quantification of trace elements in aqueous samples is crucial in terms of environmental monitoring and risk assessment for (heavy) metals in the environment. Silver (Ag) in its nanoparticulate form is commonly used as antimicrobial additive in consumer products and pharmaceuticals. Since released dissolved Ag species act as the actual antimicrobial agent, Ag nanomaterials are supposed to pose risks to the environment by a release of dissolved species. Unfortunately, no standard protocols exist yet to gain reliable information about the presence and distribution of nanomaterials in the environment. Therefore, we present an interlaboratory collaboration involving three laboratories to quantify silver, silver based nanoparticles (Ag-b-NPs) and a wide range of relevant trace elements after different sample pre-treatments for profiling surface water of a Dutch channel. Besides quantification of the elements, different sample pretreatments like acidification, with or without filtration, and their effect on the measurable elemental content were studied. Total Ag and Ag-b-NPs were quantified at lower ng L^-1 range in the channel water whereas reasonable differences depending on the pre-treatment were identified; Ba, As, Pb, Co, Cr, Cu, Ni and Zn were detected at μg L^-1 range and Na, K, Mg, Ca and Fe at mg L^-1 range. Significant sample pre-treatment effects were observed for the elements Cr, Cu, Fe, Pb and Zn, which is very likely due to the existence of particulate species. Measured concentrations were well comparable among the three laboratories underpinning method validity and correctness allowing for a comprehensive, reliable risk assessment for nanomaterials in the environment.

A field-deployable surface-enhanced Raman scattering (SERS) method for sensitive analysis of silver nanoparticles in environmental waters

The proliferation of silver nanoparticles (AgNPs) in the environment and resultant transport into aquatic systems have raised concerns regarding their potential toxicity to various organisms. These environmental and ecological concerns demand reliable AgNP detection methods which can measure environmentally relevant quantities of AgNPs in real aquatic systems. This study developed a method that couples a rapid vacuum filtration technique with a portable Raman spectrometer to achieve on-site detection of ultra-low levels of AgNPs in typical and complex aquatic systems. To extract and detect AgNPs, aluminum chloride and ferbam were added for AgNP aggregation and labelling, respectively. The AgNP aggregates were filtered through a membrane, and their presence and quantity were determined based upon the surface-enhanced Raman scattering (SERS) peak intensity of ferbam. Under the optimized conditions, the extraction efficiencies are 99 ± 0.001% in ultrapure water and 98 ± 0.025% in marine water for 1 mg/L AgNPs. This method enables simple volume adjustment and improves the consistency of AgNP distribution on the membrane. The performance of the method was evaluated in different environmental waters, including marine water, fresh waters (pond water, river water, and reservoir outlet water) and drinking waters (municipal tap water and well water), with highest signal intensity in marine water and lowest signals in fresh waters. The signal intensity difference was suggested to be caused by the amount of natural organic matter (NOM) in these environmental waters. Using pond water as an example, the interference was minimized by changing the aggregating salt from AlCl₃ to MgCl₂, and AgNPs as low as 5 μg/L were reliably detected with a volume of 100 mL. At the same volume, the developed method was sensitive enough to detect 1 μg/L AgNPs in marine water and also holds promise for assessing the time-dependent transformation of AgNPs.

Review of analytical studies on TiO2 nanoparticles and particle aggregation, coagulation, flocculation, sedimentation, stabilization

Titanium dioxide (TiO₂) nanoparticles (NPs) have been widely used in industrial and consumer products. Comprehensive and accurate detection, characterization, and quantification of TiO₂ NPs are important for understanding the specific property, behavior, fate, and potential risk of TiO₂ NPs in natural and engineered environments. This review provides a summary of recent analytical studies of TiO₂ NPs and their aggregation, coagulation, flocculation, sedimentation, stabilization under a wide range of conditions and processes. Much attention is paid on sample preparation prior to an analytical procedure, analysis of particle size, morphology, structure, state, chemical composition, surface properties, etc., via measurements of light scattering and zeta potential, microscopy, spectroscopy, and related techniques. Recently, some advanced techniques have also been explored to characterize TiO₂ NPs and their behaviors in the environment. Many issues must be considered including distinction between engineered TiO₂ NPs and their naturally occurring counterparts, lack of reference materials, interlaboratory comparison, when analyzing low concentrations of TiO₂ NPs and their behaviors in complex matrices. No "ideal" technique has emerged as each technique has its own merits, biases, and limitations. Multi-method approach is highlighted to provide in-depth information. Improvements of analytical method for determination of TiO₂ NPs have been recommended to be together with exposure modelers and ecotoxicologists for maximum individual and mutual benefit. Future work should focus on developing analytical technology with the advantages of being reliable, sensitive, selective, reproducible, and capable of in situ detection in complicated sample system.

Miniaturized liquid chromatography coupled on-line to in-tube solid-phase microextraction for characterization of metallic nanoparticles using plasmonic measurements. A tutorial

This tutorial aims at providing guidelines for analyzing metallic nanoparticles (NPs) and their dispersions by using methods based on miniaturized liquid chromatography with diode array detection (MinLC-DAD) and coupled on-line to in-tube solid-phase microextraction (IT-SPME). Some practical advice and considerations are given for obtaining reliable results. In addition, this work outlines the potential applications that set these methodologies apart from microscopy-related techniques, dynamic light scattering, single particle ICP-MS, capillary electrophoresis, field-flow fractionation and other chromatographic configurations, which are discussed and mainly seek to accomplish size estimation and NP separation, speciation analysis and quantification of mainly AgNPs and AuNPs. MinLC-DAD has the potential to estimate the NP concentration and from it the average size of unknown samples by calibrating with a single standard, as well as studying potentially non-spherical particles and stability-related properties of their dispersions. While keeping the signal dependency with concentration and increasing the method sensitivity, IT-SPME-MinLC-DAD goes further allowing for the assessment of the dispersant effect and ultimately changes in the nanoparticle surroundings that range from modifications of the hydrodynamic diameter to the exposure to different reagents and matrices. The methodology can still be improved by either exploring newer IT-SPME adsorbents or by assaying new system configurations. Taking into account that this technique gives complementary information in relation to other techniques discussed here, this tutorial serves as a guide for analyzing metallic NPs towards a better understanding of the particle behavior under different scenarios.

Gold and silver quantification from gold-silver nanoshells in HaCaT cells

A method to determine total gold (Au) and/or silver (Ag) elemental concentrations from gold nanoparticles, Au-Ag nanoshells (NS) and silica coated Au-Ag nanoshells was developed, evaluated and validated. Samples were mineralized in a mixture of concentrated aqua regia and hydrofluoric acid at 65 °C for 4 h. Mineralized solutions were diluted and standard solutions were prepared in aqua regia 5%. ICP-MS analysis was performed with or without the use of a reaction cell (CRC). For the determination of elemental concentrations of nanopowders and test suspensions, the average recovery was 99 ± 2% and 101 ± 2% for gold and silver respectively. The repeatability was evaluated by the Relative Standard Deviation (RSD). The overall analytical RSD was ≤4% (n = 3) and the RSD associated to ICP-MS analysis was ≤2% (n = 10). The limits of detection were 0.005 and 0.002 μg(element) L^-1 (analyzed solution), and the limits of quantitation 0.017 and 0.005 μg(element) L^-1 (analyzed solution), for ¹⁹⁷Au and ¹⁰⁹Ag respectively. The Ag/Au mass ratios of the NS in the different samples considered were all equal to (0.93 ± 0.04). From this information, the average thickness of gold and silver layers in the nanoshells was deduced, being 7.5 ± 0.5 and 23 ± 3 nm respectively. Finally, the developed method was successfully applied to in vitro studies to evaluate NS cellular uptake in HaCaT keratinocyte cells confirming the method robustness toward biological medium. Experiments in cell culture medium gave coherent concentrations, 70-100% of uncoated or silica-coated NS being recovered, distributed between the culture medium and the cells (internalized). The analytical repeatability (over the whole procedure, or that of the ICP-MS analysis only) remains in the same order of magnitude as in test suspensions. Minimum concentrations less than or equal to 1 μg(element) g^-1(suspension) were determined with the same accuracy.

Nanoparticles in the environment: where do we come from, where do we go to?

Nanoparticles serve various industrial and domestic purposes which is reflected in their steadily increasing production volume. This economic success comes along with their presence in the environment and the risk of potentially adverse effects in natural systems. Over the last decade, substantial progress regarding the understanding of sources, fate, and effects of nanoparticles has been made. Predictions of environmental concentrations based on modelling approaches could recently be confirmed by measured concentrations in the field. Nonetheless, analytical techniques are, as covered elsewhere, still under development to more efficiently and reliably characterize and quantify nanoparticles, as well as to detect them in complex environmental matrixes. Simultaneously, the effects of nanoparticles on aquatic and terrestrial systems have received increasing attention. While the debate on the relevance of nanoparticle-released metal ions for their toxicity is still ongoing, it is a re-occurring phenomenon that inert nanoparticles are able to interact with biota through physical pathways such as biological surface coating. This among others interferes with the growth and behaviour of exposed organisms. Moreover, co-occurring contaminants interact with nanoparticles. There is multiple evidence suggesting nanoparticles as a sink for organic and inorganic co-contaminants. On the other hand, in the presence of nanoparticles, repeatedly an elevated effect on the test species induced by the co-contaminants has been reported. In this paper, we highlight recent achievements in the field of nano-ecotoxicology in both aquatic and terrestrial systems but also refer to substantial gaps that require further attention in the future.

Polyvinylidene Fluoride Micropore Membranes as Solid-Phase Extraction Disk for Preconcentration of Nanoparticulate Silver in Environmental Waters

Efficient separation and preconcentration of trace nanoparticulate silver (NAg) from large-volume environmental waters is a prerequisite for reliable analysis and therefore understanding the environmental processes of silver nanoparticles (AgNPs). Herein, we report the novel use of polyvinylidene fluoride (PVDF) filter membrane for disk-based solid phase extraction (SPE) of NAg in 1 L of water samples with the disk-based SPE system, which consists of a syringe pump and a syringe filter holder to embed the filter membrane. While the PVDF membrane can selectively adsorb NAg in the presence of Ag⁺, aqueous solution of 2% (m/v) FL-70 is found to efficiently elute NAg. Analysis of NAg is performed following optimization of filter membrane and elution conditions with an enrichment factor of 1000. Additionally, transmission electron microscopy (TEM), UV-vis spectroscopy, and size-exclusion chromatography coupled with ICP-MS (SEC-ICP-MS) analysis showed that the extraction gives rise to no change in NAg size or shape, making this method attractive for practical applications. Furthermore, feasibility of the protocol is verified by applying it to extract NAg in four real waters with recoveries of 62.2-80.2% at 0.056-0.58 μg/L spiked levels. This work will facilitate robust studies of trace NAg transformation and their hazard assessments in the environment.

Analytical Nanoscience and Nanotechnology: Where we are and where we are heading

The main aim of this paper is to offer an objective and critical overview of the situation and trends in Analytical Nanoscience and Nanotechnology (AN&N), which is an important break point in the evolution of Analytical Chemistry in the XXI century as they were computers and instruments in the second half of XX century. The first part of this overview is devoted to provide a general approach to AN&N by describing the state of the art of this recent topic, being the importance of it also emphasized. Secondly, particular but very relevant trends in this topic are outlined: the analysis of the nanoworld, the so "third way" in AN&N, the growing importance of bioanalysis, the evaluation of both nanosensors and nanosorbents, the impact of AN&N in bioimaging and in nanotoxicological studies, as well as the crucial importance of reliability of the nanotechnological processes and results for solving real analytical problems in the frame of Social Responsibility (SR) of science and technology. Several reflections are included at the end of this overview written as a bird's eye view, which is not an easy task for experts in AN&N.

Selective detection of ZnO nanoparticles in aqueous suspension by capillary electrophoresis analysis using dithiothreitol and L-cysteine adsorbates

The UV detection sensitivity of ZnO nanoparticles in capillary electrophoresis (CE) analysis was selectively enhanced, by 27 or 19 folds, after adsorption of dithiothreitol (DTT) or cysteine (Cys) in 10mM sodium phosphate buffer. Adsorption equilibrium was reached within 90min for DTT but only 10min for Cys. The adsorption process was best modeled by the Langmuir isotherm, indicating the formation of a monolayer of DTT or Cys on the surface of ZnO nanoparticles. The selectivity of DTT and Cys towards ZnO nanoparticles was tested using alumina (Al₂O₃), ceria (CeO₂), silica (SiO₂) and titania (TiO₂) nanoparticles. No changes in the CE-UV peak area of either adsorbates or nanoparticles were observed, indicating a lack of adsorption. Dynamic light scattering (DLS) provided similar evidence of the selectivity of both adsorbates towards ZnO. Cys also improved the colloidal stability of ZnO nanoparticles by breaking down the aggregates, as evidenced by a reduction of their average hydrodynamic diameter. This new analytical approach provides a simple and rapid methodology to detect ZnO nanoparticles selectively by CE-UV analysis with enhanced sensitivity.