Droplet digital PCR applications in the tuberculosis world

Evaluation of droplet digital polymerase chain reaction by detecting cell-free deoxyribonucleic acid in pleural effusion for the diagnosis of tuberculous pleurisy: a multicentre cohort study

OBJECTIVES

Tuberculous pleurisy is one of the most common types of extra-pulmonary tuberculosis, but the sensitivity of conventional mycobacterial culture (Culture) or Xpert MTB/RIF assay (Xpert) is not satisfying. This multicentre cohort study evaluated the accuracy of a new cell-free DNA droplet digital PCR assay (cf-ddPCR) for diagnosing tuberculous pleurisy.

METHODS

Patients with suspected tuberculosis (≥5 years of age) with pleural effusion were consecutively recruited from nine research sites across six provinces in China between September 2020 to May 2022. Culture, Xpert, Xpert MTB/RIF Ultra assay (Ultra), real-time PCR, and cf-ddPCR were performed simultaneously for all specimens.

RESULTS

A total of 321 participants were enrolled, and data from 281 (87.5%) participants were available, including 105 definite tuberculous pleurisy, 113 possible tuberculous pleurisy and 63 non-tuberculous pleurisy according to the composite reference standard. The sensitivity of cf-ddPCR was 90.5% (95/105, 95% CI, 82.8-95.1%) in the definite tuberculous pleurisy group, which was significantly higher than those of Culture (57.1%, 60/105, 95% CI, 47.1-66.6%, p < 0.001), Xpert (46.7%, 49/105, 95% CI, 37.0-56.6%, p < 0.001), Ultra (69.5%, 73/105, 95% CI, 59.7-77.9%, p < 0.001) and real-time PCR (75.2%, 79/105, 95% CI, 65.7-82.9%, p < 0.001). In possible tuberculous pleurisy, whose results of Culture and Xpert were both negative, the sensitivity of cf-ddPCR was 61.1% (69/113, 95% CI, 51.4-70.0%), which was still significantly higher than that of Ultra (27.4%, 31/113, 95% CI, 19.7-36.8%, p < 0.001) and real-time PCR (38.9%, 44/113, 95% CI, 30.0-48.6%, p < 0.001).

DISCUSSION

The performance of cf-ddPCR is superior to Culture, Xpert, Ultra, and real-time PCR, indicating that improved diagnostic accuracy can be anticipated by incorporating this new assay.

Microfluidic systems for infectious disease diagnostics

Microorganisms, encompassing both uni- and multicellular entities, exhibit remarkable diversity as omnipresent life forms in nature. They play a pivotal role by supplying essential components for sustaining biological processes across diverse ecosystems, including higher host organisms. The complex interactions within the human gut microbiota are crucial for metabolic functions, immune responses, and biochemical signalling, particularly through the gut-brain axis. Viruses also play important roles in biological processes, for example by increasing genetic diversity through horizontal gene transfer when replicating inside living cells. On the other hand, infection of the human body by microbiological agents may lead to severe physiological disorders and diseases. Infectious diseases pose a significant burden on global healthcare systems, characterized by substantial variations in the epidemiological landscape. Fast spreading antibiotic resistance or uncontrolled outbreaks of communicable diseases are major challenges at present. Furthermore, delivering field-proven point-of-care diagnostic tools to the most severely affected populations in low-resource settings is particularly important and challenging. New paradigms and technological approaches enabling rapid and informed disease management need to be implemented. In this respect, infectious disease diagnostics taking advantage of microfluidic systems combined with integrated biosensor-based pathogen detection offers a host of innovative and promising solutions. In this review, we aim to outline recent activities and progress in the development of microfluidic diagnostic tools. Our literature research mainly covers the last 5 years. We will follow a classification scheme based on the human body systems primarily involved at the clinical level or on specific pathogen transmission modes. Important diseases, such as tuberculosis and malaria, will be addressed more extensively.

Relevance of the correlation between tomography findings and laboratory test results in the accuracy of the diagnosis of pulmonary tuberculosis

Objective

To evaluate the correlation between multidetector computed tomography (MDCT) findings and laboratory test results in patients with pulmonary tuberculosis (PTB).

Materials and Methods

A total of 57 patients were evaluated. Patients with suspected PTB were divided into groups according to the final diagnosis (confirmed or excluded), and the groups were compared in terms of sociodemographic variables, clinical symptoms, tomography findings, and laboratory test results.

Results

Among the patients with a confirmed diagnosis of PTB, small pulmonary nodules with a peribronchovascular distribution were significantly more common in the patients with a positive sputum smear microscopy result (47.4% vs. 8.3%; p = 0.046), as were a miliary pattern (36.8% vs. 0.0%; p = 0.026), septal thickening (84.2% vs. 41.7%; p = 0.021), and lymph node enlargement (52.6% vs. 8.3%; p = 0.020). Small pulmonary nodules with a centrilobular distribution were significantly more common among the culture-positive patients (75.0% vs. 35.7%; p = 0.045), as was a tree-in-bud pattern (91.7% vs. 42.9%; p = 0.014). A tree-in-bud pattern, one of the main tomography findings characteristic of PTB, had a sensitivity, specificity, positive predictive value, and negative predictive value of 71.0%, 73.1%, 75.9%, and 67.9%, respectively.

Conclusion

MDCT presented reliable predictive values for the main tomography findings in the diagnosis of PTB, being a safe tool for the diagnosis of PTB in patients with clinical suspicion of the disease. It also appears to be a suitable tool for the selection of patients who are candidates for more complex, invasive examinations from among those with high clinical suspicion of PTB and a negative sputum smear microscopy result.

The Significance and Importance of dPCR, qPCR, and SYBR Green PCR Kit in the Detection of Numerous Diseases

Digital PCR (dPCR) is the latest technique that has become commercially accessible for various types of research. This method uses Taq polymerase in a standard polymerase chain reaction (PCR) to amplify a target DNA fragment from a complex sample, like quantitative PCR (qPCR) and droplet digital PCR (dd- PCR). ddPCR may facilitate microRNA (miRNA) measurement, particularly in liquid biopsy, because it has been proven to be more effective and sensitive, and in this method, ddPCR can provide an unprecedented chance for deoxyribonucleic acid (DNA) methylation research because of its capability to increase sensitivity and precision over conventional PCR-based methods. qPCR has also been found to be a valuable standard technique to measure both copy DNA (cDNA) and genomic DNA (gDNA) levels, although the finding data can be significantly variable and non-reproducible without relevant validation and verification of both primers and samples. The SYBR green quantitative real-time PCR (qPCR) method has been reported as an appropriate technique for quantitative detection and species discrimination, and has been applied profitably in different experiments to determine, quantify, and discriminate species. Although both TaqMan qRT-PCR and SYBR green qRT-PCR are sensitive and rapid, the SYBR green qRT-PCR assay is easy and the TaqMan qRT-PCR assay is specific but expensive due to the probe required. This review aimed to introduce dPCR, qPCR, SYBR green PCR kit, and digital PCR, compare them, and also introduce their advantages in the detection of different diseases.

ddPCR provides a sensitive test compared with GeneXpert MTB/RIF and mNGS for suspected Mycobacterium tuberculosis infection

Introduction

The Metagenomics next-generation sequencing (mNGS) and GeneXpert MTB/RIF assay (Xpert) exhibited a sensitivity for tuberculosis (TB) diagnostic performance. Research that directly compared the clinical performance of ddPCR analysis, mNGS, and Xpert in mycobacterium tuberculosis complex (MTB) infection has not been conducted.

Methods

The study aimed to evaluate the diagnostic performance of ddPCR compared to mNGS and Xpert for the detection of MTB in multiple types of clinical samples. The final clinical diagnosis was used as the reference standard.

Results

Out of 236 patients with suspected active TB infection, 217 underwent synchronous testing for tuberculosis using ddPCR, Xpert, and mNGS on direct clinical samples. During follow-up, 100 out of 217 participants were diagnosed with MTB infection. Compared to the clinical final diagnosis, ddPCR produced the highest sensitivity of 99% compared with mNGS (86%) and Xpert (64%) for all active MTB cases.

Discussion

Twenty-two Xpert-negative samples were positive in mNGS tests, which confirmed the clinical diagnosis results from ddPCR and clinical manifestation, radiologic findings. Thirteen mNGS-negative samples were positive in ddPCR assays, which confirmed the clinical final diagnosis.ddPCR provides a higher sensitive compared to Xpert and mNGS for MTB diagnosis, as defined by the high concordance between ddPCR assay and clinical final diagnosis.

Droplet digital PCR vs. quantitative real time-PCR for diagnosis of pulmonary and extrapulmonary tuberculosis: systematic review and meta-analysis

Tuberculosis is a rising global public health emergency. Then, it is a priority to undertake innovations in preventive, diagnostic, and therapeutic methods. Improved diagnostic methods for tuberculosis are urgently needed to address this global epidemic. These methods should be rapid, accurate, affordable, and able to detect drug-resistant tuberculosis. The benefits of these new diagnostic technics include earlier diagnosis and treatment, improved patient outcomes, and reduced economic burden. Therefore, we aimed to systematically review the diagnostic performance of droplet digital PCR (ddPCR)-a third-generation PCR-compared with quantitative Real Time-PCR (qPCR) for diagnosing pulmonary and extrapulmonary tuberculosis. We included 14 diagnostic accuracy test studies performed in Asia, Europe, and Latin America, 1,672 participants or biological samples, and 975 events (pulmonary or extrapulmonary tuberculosis). Most of the included studies had a low risk of bias (QUADAS-C tool). Sensitivity and specificity were lower for ddPCR [0.56 (95% CI 0.53-0.58) and 0.97 (95% CI 0.96-0.98), respectively] than for qPCR [0.66 (95% CI 0.60-0.71) and 0.98 (95% CI 0.97-0.99), respectively]. However, the area under the ROC curve (AUC) was higher for ddPCR than for qPCR (0.97 and 0.94, respectively). Comparing both AUCs using the Hanley & McNeil method, we found statistically significant differences (AUC difference of 4.40%, p = 0.0020). In the heterogeneity analysis, we found significant differences between both techniques according to the continent of origin of the study and the location of tuberculosis (pulmonary or extrapulmonary disease). The AUCs of both methods were similar in pulmonary tuberculosis. However, for extrapulmonary tuberculosis, the AUC was higher for ddPCR. We found some limitations: (1) significant heterogeneity of the studies, and (2) we could not perform subgroup analyses according to other relevant variables, such as the age and sex of the participants. Nonetheless, this study is the first meta-analysis that shows that ddPCR has a comparable diagnostic performance than qPCR for pulmonary tuberculosis. However, for extrapulmonary tuberculosis, ddPCR has a better discriminant capacity to differentiate between patients with and without extrapulmonary tuberculosis. We conclude that ddPCR is likely the best diagnostic technic for tuberculosis diagnosis, especially for extrapulmonary tuberculosis. More studies are still needed yet.

Systematic review registration

https://www.crd.york.ac.uk/prospero/display_record.php?ID=CRD42022382768, CRD42022382768.

Comparison of digital PCR platforms using the molecular marker

Assays of clinical diagnosis and species identification using molecular markers are performed according to a quantitative method in consideration of sensitivity, cost, speed, convenience, and specificity. However, typical polymerase chain reaction (PCR) assay is difficult to quantify and have various limitations. In addition, to perform quantitative analysis with the quantitative real-time PCR (qRT-PCR) equipment, a standard curve or normalization using reference genes is essential. Within the last a decade, previous studies have reported that the digital PCR (dPCR) assay, a third-generation PCR, can be applied in various fields by overcoming the shortcomings of typical PCR and qRT-PCR assays. We selected Stilla Naica System (Stilla Technologies), Droplet Digital PCR Technology (Bio-Rad), and Lab on an Array Digital Real-Time PCR analyzer system (OPTOLANE) for comparative analysis among the various droplet digital PCR platforms currently in use commercially. Our previous study discovered a molecular marker that can distinguish Hanwoo species (Korean native cattle) using Hanwoo-specific genomic structural variation. Here, we report the pros and cons of the operation of each dPCR platform from various perspectives using this species identification marker. In conclusion, we hope that this study will help researchers to select suitable dPCR platforms according to their purpose and resources.

Narrative Review: Update on the Molecular Diagnosis of Fragile X Syndrome

The diagnosis and management of fragile X syndrome (FXS) have significantly improved in the last three decades, although the current diagnostic techniques are not yet able to precisely identify the number of repeats, methylation status, level of mosaicism, and/or the presence of AGG interruptions. A high number of repeats (>200) in the fragile X messenger ribonucleoprotein 1 gene (FMR1) results in hypermethylation of promoter and gene silencing. The actual molecular diagnosis is performed using a Southern blot, TP-PCR (Triplet-Repeat PCR), MS-PCR (Methylation-Specific PCR), and MS-MLPA (Methylation-Specific MLPA) with some limitations, with multiple assays being necessary to completely characterise a patient with FXS. The actual gold standard diagnosis uses Southern blot; however, it cannot accurately characterise all cases. Optical genome mapping is a new technology that has also been developed to approach the diagnosis of fragile X syndrome. Long-range sequencing represented by PacBio and Oxford Nanopore has the potential to replace the actual diagnosis and offers a complete characterization of molecular profiles in a single test. The new technologies have improved the diagnosis of fragile X syndrome and revealed unknown aberrations, but they are a long way from being used routinely in clinical practice.

Evolution of tuberculosis diagnostics: From molecular strategies to nanodiagnostics

Tuberculosis has remained a global concern for public health affecting the lives of people for ages. Approximately 10 million people are affected by the disease and 1.5 million succumb to the disease worldwide annually. The COVID-19 pandemic has highlighted the role of early diagnosis to win the battle against such infectious diseases. Thus, advancement in the diagnostic approaches to provide early detection forms the foundation to eradicate and manage contagious diseases like tuberculosis. The conventional diagnostic strategies include microscopic examination, chest X-ray and tuberculin skin test. The limitations associated with sensitivity and specificity of these tests demands for exploring new techniques like probe-based assays, CRISPR-Cas and microRNA detection. The aim of the current review is to envisage the correlation between both the conventional and the newer approaches to enhance the specificity and sensitivity. A significant emphasis has been placed upon nanodiagnostic approaches manipulating quantum dots, magnetic nanoparticles, and biosensors for accurate diagnosis of latent, active and drug-resistant TB. Additionally, we would like to ponder upon a reliable method that is cost-effective, reproducible, require minimal infrastructure and provide point-of-care to the patients.

Development and Preliminary Application of a Droplet Digital PCR Assay for Quantifying the Oncolytic Herpes Simplex Virus Type 1 in the Clinical-Grade Production

Oncolytic herpes simplex virus (oHSV) is a type of virus that selectively targets and kills cancer cells, leaving normal cells unharmed. Accurate viral titer is of great importance for the production and application of oHSV products. Droplet digital PCR (ddPCR) is known for having good reproducibility, not requiring a standard curve, not being affected by inhibitors, and being precise even in the detection of low copies. In the present study, we developed a droplet digital PCR assay for the quantification of HSV-1 and applied it in the oHSV production. The established ddPCR showed good specificity, linearity, a low limit of quantification, great reproducibility, and accuracy. The quantification result was well-associated with that of plaque assay and CCID50. Amplification of the purified virus without DNA extraction by ddPCR presented similar results to that from the extracted DNA, confirming the good resistance against PCR inhibitors. With the ddPCR, viral titer could be monitored in real time during the production of oHSV; the optimal harvest time was determined for the best virus yield in each batch. The ddPCR can be used as a useful tool for the quantification of oHSV and greatly facilitate the manufacturing process of oHSV products.

Use of Pleural Fluid Digital PCR Analysis to Improve the Diagnosis of Pleural Tuberculosis

The diagnosis of pleural tuberculosis (TB) remains difficult due to the paucity of Mycobacterium tuberculosis in pleural fluid (PF). This study aimed to improve pleural TB diagnosis using highly sensitive digital PCR (dPCR) technique. A total of 310 patients with evidence of PF were consecutively enrolled, 183 of whom suffered from pleural TB and 127 from non-TB. PF samples were prospectively collected and total DNA was extracted. The copy numbers of M. tuberculosis insertion sequence (IS) 6110 and IS1081 in DNA were quantified using dPCR. The overall area under the curve of IS6110-dPCR was greater than that of IS1081-dPCR (0.85 versus 0.79). PF IS6110 OR IS1081-dPCR (according to their cut-off values, "positive" was defined as either of them was positive, while "negative" was defined as both of them were negative) had higher sensitivity and equal specificity compared with single target-dPCR. The sensitivity of PF IS6110 OR IS1081-dPCR for total, definite, and probable pleural TB was 59.0% (95% CI = 51.5% to 66.2%), 72.8% (95% CI = 62.6% to 81.6%), and 45.1% (95% CI = 34.6% to 55.8%), respectively. Its specificity was 100% (95% CI = 97.1% to 100.0%). PF IS6110 OR IS1081-dPCR showed a higher sensitivity than smear microscopy (57.4% versus 7.1%), mycobacterial culture (55.3% versus 31.8%), and Xpert MTB/RIF (57.6% versus 23.0%). Long antituberculosis treatment time (>1 month) was found to be associated with negative dPCR results in pleural TB patients. This study indicates that PF IS6110 OR IS1081-dPCR is an accurate molecular assay, which is more sensitive than routine etiological tests and has the potential to enhance the definite diagnosis of pleural TB. IMPORTANCE Pleural TB is one of the most frequent causes of pleural effusion, especially in areas with high burden of TB. Due to the paucibacillary nature of the disease, the diagnostic sensitivities of all available bacteriological and molecular tests remain poor. There is an urgent need to develop new efficient methods. Digital PCR (dPCR) is the third generation of PCR that enables the exact quantification of trace nucleic acids in samples. This study evaluates the diagnostic performance of pleural fluid (PF) dPCR analysis for pleural TB, and shows that PF IS6110 OR IS1081-dPCR has a higher sensitivity than routine etiological tests such as smear microscopy, mycobacterial culture, and Xpert MTB/RIF. This work provides a new choice for improving the definite diagnosis of pleural TB.

Fate of antibiotic resistance genes (ARGs) in wastewater treatment plant: Preliminary study on identification before and after ultrasonication

This study collected sludge samples from four different sections of a local wastewater treatment plant in Mikkeli, Finland, for antibiotic resistance genes (ARGs) analysis. Here, we examine the seven representative ARGs in sludge, encoding erythromycin (ermB), tetracycline (tetA, tetC, tetQ, tetW) and sulphonamide (sul1) to check abundance before and after ultrasonication. The class 1 integron (intl1) was also observed as an indicator of antibiotic resistance and horizontal gene transmission. The pre-treatment condition included 10 min of ultrasonication (US) for the sludge sample before freeze-drying. The droplet digital PCR system was used to assess the ARGs from the samples, and it was found that ARGs were not effectively eliminated by pre-treatment. After ultrasonication, tetA, tetC and tetQ did not show any variation but tetW showed 20 copies/ng of lower abundance in digested sludge than raw sludge, and a similar abundance was found in dewatered sludge. For MBR sludge, only ermB showed 1000 copies/ng higher abundance compared to the raw sample and surprisingly it did not show the presence of any other types of ARG. This study provides an overview of the appearance of ARGs in regional municipal sludge for further research reflection.

Recent trends and developments of PCR-based methods for the detection of food-borne Salmonella bacteria and Norovirus

In recent years, rapid detection methods such as polymerase chain reaction (PCR) and quantitative real-time PCR (qPCR) have been continuously developed to improve the detection of food-borne pathogens in food samples. The recent developments of PCR and qPCR in the detection and identification of these food-borne pathogens are described and elaborated throughout this review. Specifically, further developments and improvements of qPCR are discussed in detecting Salmonella and norovirus. Promising advances in these molecular detection methods have been widely used to prevent human food-borne illnesses and death caused by the food-borne pathogens. In addition, this review presents the limitations and challenges of the detection methods which include conventional culture method and conventional PCR method in detecting Salmonella and norovirus. Furthermore, several advances of qPCR such as viability PCR (vPCR) and digital PCR (dPCR) have been discussed in the detection of Salmonella and norovirus. Good practice of analysis of the food-borne pathogens and other contaminants in the food industry as well as the advancement of molecular detection methods will help improve and ensure food safety and food quality.

Highly Sensitive Detection of Isoniazid Heteroresistance in Mycobacterium Tuberculosis by Droplet Digital PCR

Purpose

The drug resistance of Mycobacterium tuberculosis constitutes a major public health threat. Existing approaches make it challenging to detect low levels of drug-resistant TB, also known as heteroresistance (HR), in a population. The recently found droplet digital PCR (ddPCR) is a sensitive method for determining the precise amount of nucleic acid in a sample. We used ddPCR to test the Mycobacterium tuberculosis heteroresistance because it delivers more exact quantitative data without the need for a reference curve.

Patients and Methods

A TaqMan-MGB probe mutation detection assay was developed in order to determine the mutant and wild-type sequences of the isoniazid resistance katG (315) gene. We produced heteroresistant MTB combinations, which were subsequently identified by ddPCR, qPCR, and MeltPro/INH. In addition, 21 clinical sputum samples with positive smears were used to validate each method’s capacity to determine HR in sputum.

Results

We discovered that ddPCR can detect mutant sequences in as few as 0.01% of a combination. DeepMelt TB/INH, which is less sensitive in comparison, cannot detect HR with high resolution and requires a mutation rate of 50% to identify. qPCR likewise has a high resolution of 0.02%, but unlike ddPCR, it cannot determine the exact number of mutations. Our assay is applicable to sputum as well. ddPCR found a katG 315 substitution in two sputums with extremely low values of HR (0.26% and 0.14%). In 21 samples of clinical sputum, the HR prevalence of INH was 9.5%.

Conclusion

This work demonstrates that a well-designed ddPCR HR detection test can detect low levels of HR with high accuracy and consistency and gives new information for the clinical diagnosis of drug resistance.

Evaluation of a droplet digital PCR assay for quantification of Mycobacterium avium subsp. paratuberculosis DNA in whole-blood and fecal samples from MAP-infected Holstein cattle

Bovine paratuberculosis (PTB) is an infectious disease that affects ruminants worldwide and is a burden on the dairy industry. PTB control measures include culling of Mycobacterium avium subsp. paratuberculosis (MAP)-infected animals from the herd and the enhancement of farm-biosecurity measures. Diagnostics tools for the direct detection of MAP are fecal real-time qPCR and bacteriological culture, the last one being considered the gold standard. However, both show limitations for detecting subclinical MAP-infected cattle with low bacterial load in feces and gut tissues. Droplet digital polymerase chain reaction (ddPCR) is a third-generation PCR method that shows high reproducibility for the quantification of low DNA copy numbers. The objective of this study was to design a ddPCR assay to detect and quantify a fragment of the F57 MAP-specific sequence in samples of naturally MAP-infected Holstein cattle. DNA was isolated from whole-blood and fecal samples from control cows with a negative ELISA and qPCR result (N = 75) and from cows with PTB-associated focal (N = 32), multifocal (N = 21), and diffuse lesions (N = 17) in gut tissues. After ddPCR, the DNA extracted from fecal samples of cows with diffuse lesions showed higher mean copies per microliter (13,791.2 copies/μl) than samples from cows with multifocal lesions (78.8 copies/μl), focal lesions (177.1 copies/μl) or control cows (4.8 copies/μl) (P ≤ 0.05). Significant differences in mean DNA copies/μl were also observed in the blood samples from cows with focal lesions (47.7 copies/μl) when compared with cows with multifocal and diffuse lesions; 18.1 and 12.4 copies/μl, respectively. Using a principal component analysis, the results of the fecal ddPCR clustered together with the results of a commercial ELISA for the specific detection of MAP antibodies, fecal and tissue qPCR, and bacteriological culture results. In contrast, blood ddPCR results clustered together with the results of an ELISA for the detection of a biomarker of subclinical PTB, the ABCA13 transporter. Blood ddPCR was the most sensitive tool (sensitivity 71%, specificity 100%) of all the quantitative methods used in the study for the detection of subclinical cows with focal lesions.

Digital PCR Applications in the SARS-CoV-2/COVID-19 Era: a Roadmap for Future Outbreaks

The ongoing coronavirus disease 2019 (COVID-19) pandemic, caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has led to a global public health disaster. The current gold standard for the diagnosis of infected patients is real-time reverse transcription-quantitative PCR (RT-qPCR). As effective as this method may be, it is subject to false-negative and -positive results, affecting its precision, especially for the detection of low viral loads in samples. In contrast, digital PCR (dPCR), the third generation of PCR, has been shown to be more effective than the gold standard, RT-qPCR, in detecting low viral loads in samples. In this review article, we selected publications to show the broad-spectrum applications of dPCR, including the development of assays and reference standards, environmental monitoring, mutation detection, and clinical diagnosis of SARS-CoV-2, while comparing it analytically to the gold standard, RT-qPCR. In summary, it is evident that the specificity, sensitivity, reproducibility, and detection limits of RT-dPCR are generally unaffected by common factors that may affect RT-qPCR. As this is the first time that dPCR is being tested in an outbreak of such a magnitude, knowledge of its applications will help chart a course for future diagnosis and monitoring of infectious disease outbreaks.

Screening of plasma exosomal lncRNAs to identify potential biomarkers for obstructive sleep apnea

Background

Obstructive sleep apnea (OSA) is highly prevalent, but frequently undiagnosed. The existing biomarkers of OSA are relatively insensitive and inaccurate. Long non-coding RNAs (lncRNAs) have no protein-coding ability but have a role in regulating gene expression. They are stably expressed in exosomes, easily and rapidly measurable. Changes in expression of exosomal lncRNAs can be useful for disease diagnoses. However, there are few reports on the association of exosomal lncRNAs with OSA. We aimed to investigate the exosomal lncRNA profiles to establish the differences between non-OSA, OSA with or without hypertension (HTN) and serve as a potential diagnostic biomarker.

Methods

This diagnostic test included 63 participants: [normal control (NC) =25], (OSA =23), and (HTN-OSA =15). Expression profiling of lncRNAs in isolated exosomes was performed through high-throughput sequencing in 9 participants. Subsequently, OSA/HTN-OSA related lncRNAs were selected for validation by droplet digital polymerase chain reaction (ddPCR), receiver operating characteristic (ROC) curves were used to determine the diagnostic value. The reliabilities of the screened gene were further validated in another independent cohort: (NC =10), (OSA mild =10), (OSA moderate =11), and (OSA severe =10), the correlation between clinical features and its expression was analyzed. The MiRanda software was used to predict the binding sites of interaction between microRNA (miRNA) and target genes regulated by screened lncRNA.

Results

We identified the differentially expressed lncRNAs and mRNAs in plasma exosomes of the NC, OSA, HTN-OSA groups. Most pathways enriched in differentially expressed lncRNAs and mRNAs had previously been linked to OSA. Among them, ENST00000592016 enables discrimination between NC and OSA individuals [area under curve (AUC) =0.846, 95% confidence interval (CI): 0.72–0.97]. The severity of OSA was associated with changes in the ENST00000592016 expression. Furthermore, ENST00000592016 affected the PI3K-Akt, MAPK, and TNF pathways by regulating miRNA expressions.

Conclusions

This is the first report about differential expression of lncRNA in OSA and HTN-OSA exosomes. ENST00000592016 enables discrimination between NC and OSA individuals. This work enabled characterization of OSA and provided the preliminary work for the study of biomarker of OSA.

A new droplet digital PCR assay: improving detection of paucibacillary smear-negative pulmonary tuberculosis

BACKGROUND

Smear-negative pulmonary tuberculosis (PTB) is difficult to diagnose. Current diagnosis and treatment monitoring methods have inherent limitations. Droplet digital PCR (ddPCR) is a new technique with high sensitivity. This study presents a novel ddPCR for rapid and sensitive identification of Mycobacterium tuberculosis (MTB).

METHODS

MTB DNA was detected in respiratory specimens from suspected PTB cases using ddPCR assay, which was directed at two different locations within IS6110. We, for the first time, evaluated the clinical diagnostic ability of this ddPCR for paucibacillary smear-negative PTB.

RESULTS

A total of 605 PTB suspects were recruited, including 263 confirmed PTB patients (84.03% from smear-negative PTB) and 342 non-PTB. The sensitivity and specificity of IS6110 ddPCR were 61.22% (95% confidence interval (CI), 55.00%-67.10%) and 95.03% (95% CI, 92.20%-97.10%) for total PTB, and 57.92% (95% CI, 51.10%-64.50%) and 94.57% (95% CI, 91.20%-96.90%) for smear-negative PTB. ddPCR assay outperformed Xpert MTB/RIF (53.08% vs. 28.46%, p = 0.020) in smear-negative PTB detection. Furthermore, effective anti-tuberculosis treatment was linked to significantly lower IS6110 copies detected by ddPCR.

CONCLUSIONS

Herein, we developed and validated a highly sensitive and robust ddPCR assay for MTB quantification in respiratory specimens, which improve diagnosis and therapeutic effect evaluation of smear-negative PTB.

Improved Conventional and New Approaches in the Diagnosis of Tuberculosis

Tuberculosis (TB) is a life-threatening infectious disease caused by Mycobacterium tuberculosis (M. tuberculosis). Timely diagnosis and effective treatment are essential in the control of TB. Conventional smear microscopy still has low sensitivity and is unable to reveal the drug resistance of this bacterium. The traditional culture-based diagnosis is time-consuming, since usually the results are available after 3–4 weeks. Molecular biology methods fail to differentiate live from dead M. tuberculosis, while diagnostic immunology methods fail to distinguish active from latent TB. In view of these limitations of the existing detection techniques, in addition to the continuous emergence of multidrug-resistant and extensively drug-resistant TB, in recent years there has been an increase in the demand for simple, rapid, accurate and economical point-of-care approaches. This review describes the development, evaluation, and implementation of conventional diagnostic methods for TB and the rapid new approaches for the detection of M. tuberculosis.

Effects of Wolbachia elimination and B-vitamin supplementation on bed bug development and reproduction

Obligate blood feeders, such as Cimex lectularius (common bed bug), have symbiotic associations with nutritional endosymbionts that produce B-vitamins. To quantify the symbiont's contribution to host fitness in these obligate mutualisms, the symbiont must be eliminated and its absence rigorously confirmed. We developed and validated procedures for complete elimination of Wolbachia (Wb) in bed bugs and quantified development and reproduction in bed bugs with and without Wb and with and without B-vitamins supplementation. Aposymbiotic bed bugs had slower nymphal development, reduced adult survivorship, smaller adult size, fewer eggs per female, and lower hatch rate than bed bugs that harbored Wb. In aposymbiotic bed bugs that were fed B-vitamins-supplemented blood, nymph development time, adult survivorship and hatch rate recovered to control levels, but adult size and egg number only partially recovered. These results underscore the nutritional dependence of bed bugs on their Wb symbiont and suggest that Wb may provide additional nutritional benefits beyond the B-vitamin mix that we investigated.

Comparison of qPCR with ddPCR for the Quantification of JC Polyomavirus in CSF from Patients with Progressive Multifocal Leukoencephalopathy

Background: Lytic infection of oligodendrocytes by the human JC polyomavirus (JCPyV) results in the demyelinating disease called progressive multifocal leukoencephalopathy (PML). The detection of viral DNA in the cerebrospinal fluid (CSF) by PCR is an important diagnostic tool and, in conjunction with defined radiological and clinical features, can provide diagnosis of definite PML, avoiding the need for brain biopsy. The main aim of this study is to compare the droplet digital PCR (ddPCR) assay with the gold standard quantitative PCR (qPCR) for the quantification of JC viral loads in clinical samples. Methods: A total of 62 CSF samples from 31 patients with PML were analyzed to compare the qPCR gold standard technique with ddPCR to detect conserved viral DNA sequences in the JCPyV genome. As part of the validation process, ddPCR results were compared to qPCR data obtained in 42 different laboratories around the world. In addition, the characterization of a novel triplex ddPCR to detect viral DNA sequence from both prototype and archetype variants and a cellular housekeeping reference gene is described. Triplex ddPCR was used to analyze the serum from six PML patients and from three additional cohorts, including 20 healthy controls (HC), 20 patients with multiple sclerosis (MS) who had never been treated with natalizumab (no-NTZ-treated), and 14 patients with MS who were being treated with natalizumab (NTZ-treated); three from this last group seroconverted during the course of treatment with natalizumab. Results: JCPyV DNA was detected only by ddPCR for 5 of the 62 CSF samples (8%), while remaining undetected by qPCR. For nine CSF samples (15%), JCPyV DNA was at the lower limit of quantification for qPCR, set at <250 copies/mL, and therefore no relative quantitation could be determined. By contrast, exact copies of JCPyV for each of these samples were quantified by ddPCR. No differences were observed between qPCR and ddPCR when five standardized plasma samples were analyzed for JCPyV in 42 laboratories in the United States and Europe. JCPyV-DNA was undetected in all the sera from HC and MS cohorts tested by triplex ddPCR, while serum samples from six patients with PML tested positive for JCPyV. Conclusion: This study shows strong correlation between ddPCR and qPCR with increased sensitivity of the ddPCR assay. Further work will be needed to determine whether multiplex ddPCR can be useful to determine PML risk in natalizumab-treated MS patients.

Point-of-care diagnostic tests for tuberculosis disease

Rapid diagnosis is one key pillar to end tuberculosis (TB). Point-of-care tests (POCTs) facilitate early detection, immediate treatment, and reduced transmission of TB disease. This Review evaluates current diagnostic assays endorsed by the World Health Organization and identifies the gaps between existing conventional tests and the ideal POCT. We discuss the commercial development of new rapid tests and research studies on nonsputum-based diagnostic biomarkers from both pathogen and host. Last, we highlight advances in integrated microfluidics technology that may aid the development of new POCTs.

Droplet Digital PCR (ddPCR) Analysis for Detecting Shiga-Toxin-Producing Escherichia coli (STEC)

Verocytotoxin-producing Escherichia coli, also referred to as Shiga-toxin-producing Escherichia coli (STEC), can be transmitted to humans through person-to-person contact, consumption of contaminated food or water, or by direct contact with animals. Its clinical and economic consequences have prompted the development of alternative approaches to the official method of analysis “UNI CEN ISO/TS 13136: 2012”, which describes the identification of STEC through the detection of its main virulence genes. Recently, droplet digital PCR (ddPCR) has been proposed as a technique for the sequence-specific detection and direct quantification of nucleic acids. The present study aimed to investigate if ddPCR could be able to detect STEC in less time than that required by the official method. This study consisted of the ddPCR of slices of beef contaminated with STEC and of the sponges used for beef official control at the slaughter stage. The results showed the ability of ddPCR to detect STEC in slices of beef already after sample incubation for 7 h at 37 °C while, in the case of sponges used for official controls, 9 h at 37 °C was needed. In this way, the ddPCR could represent an efficient method for detecting STEC and providing results in less time than the official method.

Application of Droplet Digital PCR to Detection of Mycobacterium tuberculosis and Mycobacterium leprae Infections: A Narrative Review

Tuberculosis (TB) is a chronic infectious disease caused by Mycobacterium tuberculosis (MTB) infection, which has seriously endangered human health for many years. With the emergence of multidrug-resistant and extensively drug-resistant MTB, the prevention and treatment of TB has become a pressing need. Early diagnosis, drug resistance monitoring, and control of disease transmission are critical aspects in the prevention and treatment of TB. However, the currently available diagnostic technologies and drug sensitivity tests are time consuming, and thus, it is difficult to achieve the goal of early diagnosis and detection drug sensitivity, which results in limited control of disease transmission. The development of molecular testing technology has gradually achieved the vision of rapid and accurate diagnosis of TB. Droplet digital PCR (ddPCR) is an excellent nucleic acid quantification method with high sensitivity and no need for a calibration curve. Herein, we review the application of ddPCR in TB diagnosis and drug resistance detection and transmission monitoring.

Micro and nanofluidics for high throughput drug screening

In this book chapter, we elaborate on the state-of-the-art technology developments in high throughput screening, microfluidics and nanofluidics. This book chapter further elaborated on the application of microfluidics and nanofluidics for high throughput drug screening with respect to communicable diseases and non-communicable diseases such as cancer. As a future perspective, there is tremendous potential for microfluidics and nanofluidics to be applied in high throughput drug screening which could be applied for various biotechnology applications such as in cancer precision medicine, point-of-care diagnostics and imaging. With the integration of Fourth industrial revolution (4IR) technologies with micro and nanofluidics technologies, it envisioned that such integration along with digital health would enable next generation technology development in medical field.

One-Step Reverse Transcription Droplet Digital PCR Protocols for SARS-CoV-2 Detection and Quantification

Droplet digital polymerase chain reaction (ddPCR) is a third generation of PCR that was recently developed to overcome the limitation of direct quantification observed in real-time quantification PCR (qPCR). Recent studies have shown that ddPCR is more sensitive than the gold standard reverse transcription real-time quantitative polymerase chain reaction (RT-qPCR) in detecting severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) samples. In combination with multiplexing, multiple RT-ddPCR assays can be developed to directly quantify different SARS-CoV-2 nucleic acid targets within a single sample, significantly saving on cost and time. Since ddPCR is tolerant to a number of inhibitors unlike qPCR, it can be used to detect and quantify samples from complex environments like wastewater. Here we present three one-step RT-ddPCR protocols on how to develop simplex (one target), duplex (two targets), and triplex probe mix (three targets) assays for SARS-CoV-2 detection and quantification. The assays can be used for diagnosis or other research-related SARS-CoV-2 applications.

The Potential of Digital Polymerase Chain Reaction for Improving Diagnostic Yield of Nontuberculous Mycobacteria Pulmonary Disease

Introduction

Many patients with nontuberculous mycobacteria pulmonary disease are asymptomatic. The disease diagnosis is confirmed in only a small proportion of patients with radiological findings suspicious for nontuberculous mycobacteria pulmonary disease. Thus, many patients remained undiagnosed. Here, we evaluated the diagnostic value of digital polymerase chain reaction (PCR) in nontuberculous mycobacteria pulmonary disease.

Methods

We prospectively evaluated 123 patients with radiological findings suspicious for nontuberculous mycobacteria pulmonary disease. Digital PCR was performed using bronchial lavage fluid, sputum, saliva, blood, and urine.

Results

The culture of bronchial washing fluid was positive for nontuberculous mycobacteria in 53 patients and negative in 70. The positive detection rate of nontuberculous mycobacteria by digital PCR in patients with positive culture (n = 53) was as follows: bronchial lavage fluid 100%, sputum 62.9%, saliva 41.5%, blood 7.5%, and urine 3.8%. All patients with two or more positive partitions for nontuberculous mycobacteria in the digital PCR of bronchial lavage fluid showed nontuberculous mycobacteria growth in the bronchial lavage fluid culture. The digital PCR analysis of the bronchial lavage fluid showed a high sensitivity (100%), specificity (85.7%), positive predictive value (84.1%), negative predictive value (100%), and a high concordance rate (91.9%) with the bronchial lavage fluid culture results. In addition, the culture of bronchial lavage fluid was positive for nontuberculous mycobacteria in patients with two or more positive partitions in the digital PCR of sputum and saliva with a combined positive predictive value of 81.1%.

Conclusion

Digital PCR analysis of nontuberculous mycobacteria in bronchial lavage fluid shows a high concordance rate with the bronchial lavage fluid culture results and a high positive predictive value using both sputum and saliva, suggesting the potential usefulness of dPCR for diagnosis of nontuberculous mycobacteria pulmonary disease in clinical practice.

SARS-CoV-2/COVID-19 laboratory biosafety practices and current molecular diagnostic tools

The ongoing severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2)/coronavirus disease 2019 (COVID-19) pandemic has crippled several countries across the globe posing a serious global public health challenge. Despite the massive rollout of vaccines, molecular diagnosis remains the most important method for timely isolation, diagnosis, and control of COVID-19. Several molecular diagnostic tools have been developed since the beginning of the pandemic with some even gaining emergency use authorization from the United States (US) Food and Drug Administration for in vitro diagnosis of SARS-CoV-2. Herein, we discuss the working principles of some commonly used molecular diagnostic tools for SARS-CoV-2 including nucleic acid amplification tests, isothermal amplification tests, and rapid diagnostic tests. To ensure successful detection while minimizing the risk of cross-infection and misdiagnosis when using these diagnostic tools, laboratories should adhere to proper biosafety practices. Hence, we also present the common biosafety practices that may ensure the successful detection of SARS-CoV-2 from specimens while protecting laboratory workers and non-suspecting individuals from being infected. From this review article, it is clear that the SARS-CoV-2 pandemic has led to an increase in molecular diagnostic tools and the formation of new biosafety protocols that may be important for future and ongoing outbreaks.

Novel approaches for rapid detection of COVID-19 during the pandemic: A review

The rapid spread of the SARS-CoV-2 virus that caused the COVID-19 disease, has highlighted our urgent need for sensitive, fast and accurate diagnostic technologies. In fact, one of the main challenges for flatting COVID-19 spread charts is the ability to accurately and rapidly identify asymptomatic cases that result in spreading the virus to close contacts. SARS-CoV-2 virus mutation is also relatively rapid, which makes the detection of COVID-19 diseases still crucial even after the vaccination. Conventional techniques, which are commercially available have focused on clinical manifestation, along with molecular and serological detection tools that can identify the SARS-CoV-2 virus however, owing to various disadvantages including low specificity and sensitivity, a quick, low cost and easy approach is needed for diagnosis of COVID-19. Scientists are now showing extensive interest in an effective portable and simple detection method to diagnose COVID-19. There are several novel methods and approaches that are considered viable advanced systems that can meet the demands. This study reviews the new approaches and sensing technologies that work on COVID-19 diagnosis for easy and successful detection of SARS-CoV-2 virus.

Competitiveness of Quantitative Polymerase Chain Reaction (qPCR) and Droplet Digital Polymerase Chain Reaction (ddPCR) Technologies, with a Particular Focus on Detection of Antibiotic Resistance Genes (ARGs)

With fast-growing polymerase chain reaction (PCR) technologies and various application methods, the technique has benefited science and medical fields. While having strengths and limitations on each technology, there are not many studies comparing the efficiency and specificity of PCR technologies. The objective of this review is to summarize a large amount of scattered information on PCR technologies focused on the two majorly used technologies: qPCR (quantitative polymerase chain reaction) and ddPCR (droplet-digital polymerase chain reaction). Here we analyze and compare the two methods for (1) efficiency, (2) range of detection and limitations under different disciplines and gene targets, (3) optimization, and (4) status on antibiotic resistance genes (ARGs) analysis. It has been identified that the range of detection and quantification limit varies depending on the PCR method and the type of sample. Careful optimization of target gene analysis is essential for building robust analysis for both qPCR and ddPCR. In our era where mutation of genes may lead to a pandemic of viral infectious disease or antibiotic resistance-induced health threats, this study hopes to set guidelines for meticulous detection, quantification, and analysis to help future prevention and protection of global health, the economy, and ecosystems.

Rapid Detection and Quantification of Mycobacterium tuberculosis DNA in Paraffinized Samples by Droplet Digital PCR: A Preliminary Study

Background: Rapid and reliable diagnosis of tuberculosis (TB) represents a diagnostic challenge in compartmentalized extrapulmonary TB infection because of the small number of mycobacteria (MTB) and the frequent lack of fresh samples to perform culture. Here, we estimate the performances of homemade droplet digital PCR (ddPCR)-based assays against culture in 89 biopsies, for those fresh and formalin-fixed and paraffin-embedded (FFPE) subsamples were available.

Methods: MTB diagnosis in fresh subsamples was performed by culture. Fresh subsamples were also analyzed for acid-fast bacilli smear-microscopy (AFB) and Xpert^® MTB/RIF (Xpert). MTB examination was repeated in blind in the 89 FFPE subsamples by in-house ddPCR assays targeting the IS6110 and rpoB. Analytical sensitivity of ddPCR assays was evaluated using serial dilution of H37Rv strain. Limit of detection (LOD) was calculated by probit analysis. Results were expressed in copies/10⁶ cells.

Results: IS6110 and rpoB ddPCR assays showed a good linear correlation between expected and observed values (R²: 0.9907 and 0.9743, respectively). Probit analyses predicted a LOD of 17 and 40 copies/10⁶ cells of MTB DNA for IS6110 and rpoB, respectively. Of the 89 biopsies, 68 were culture positive and 21 were culture negative. Considering mycobacterial culture as reference method, IS6110 assay yielded positive results in 67/68 culture-positive samples with a median interquartile range (IQR) of 1,680 (550–8,444) copies/10⁶ cells (sensitivity: 98.5%; accuracy: 98.9). These performances were superior to those reported by the rpoB assay in FFPE subsamples (sensitivity: 66.20%; accuracy: 74.1) and even superior to those reported by Xpert and AFB in fresh subsamples (sensitivity: 79.4 and 33.8%, respectively; accuracy: 84.3 and 49.4, respectively). When Xpert and AFB results were stratified according to mycobacterial load detected by rpoB and IS6110 ddPCR, bacterial load was lower in Xpert and AFB negative with respect to Xpert and AFB-positive samples (p = 0.003 and 0.01 for rpoB and p = 0.01 and 0.11 for IS6110), confirming the poor sensitivity of these methods in paucibacillary disease.

Conclusion: ddPCR provides highly sensitive, accurate, and rapid MTB diagnosis in FFPE samples, as defined by the high concordance between IS6110 assay and culture results. This approach can be safely introduced in clinical routine to accelerate MTB diagnosis mainly when culture results remain unavailable.

Light-Regulated Natural Fluorescence of the PCC 6803@ZIF-8 Composite as an Encoded Microsphere for the Detection of Multiple Biomarkers

The use of color-encoded microspheres for a bead-based assay has attracted increasing attention for high-throughput multiplexed bioassays. A fluorescent PCC 6803@ZIF-8 composite was prepared as a bead-based assay platform by a self-assembled zeolitic imidazolate framework (ZIF-8) on the surface of inactivated PCC 6803 cells. The composite fluorescence owing to the presence of pigment proteins in PCC 6803 could be gradually bleached with the prolongation of the ultraviolet light irradiation time. The composites with different fluorescence intensities were therefore obtained as encoded microspheres for the multiplexed assay. ZIF-8 provides a stable, rigid shell and a large specific surface area for composites, which prevent the composites from breakage during use and storage, simplify the protein immobilization procedure, reduce non-specific adsorption, and enhance the detection sensitivity. The encoded composites were successfully used to detect multiple DNA insertion sequences of Mycobacterium tuberculosis. The presented strategy offers an innovative color-encoding method for high-throughput multiplexed bioassays without the need of using chemically synthesized fluorescent materials.

Digital PCR for accurate quantification of pathogens: Principles, applications, challenges and future prospects

Pathogens pose a severe threat to food safety and human health. The traditional methods for pathogen detection can't meet the growing diagnosis and control need. Digital PCR (dPCR) attracts a considerable attention for its ability to absolutely quantify pathogens with features of high selectivity, simplicity, accuracy and rapidity. The dPCR technique that achieves absolute quantification based on end-point measurement without standard curve offers a guideline for further genetic analysis and molecular diagnosis. It could contribute to the quantification of low level of nucleic acid, early detection and timely prevention of pathogenic diseases. In this review, 1442 publications about dPCR were selected and the detections of various pathogens by dPCR were reviewed comprehensively, including viruses, bacteria, parasites and fungi. A number of examples are cited to illustrate that dPCR is a new powerful tool with desired accuracy, sensitivity, and reproducibility for quantification of different types of pathogens. Moreover, the benefits, challenges and future prospects of the dPCR were also highlighted in this review.

Development and Preliminary Application of Multiplex Loop-Mediated Isothermal Amplification Coupled With Lateral Flow Biosensor for Detection of Mycobacterium tuberculosis Complex

The aim of this study was to develop a simple and reliable method to detect Mycobacterium tuberculosis complex (MTBC) and verify its clinical application preliminarily. A loop-mediated isothermal amplification method coupled with lateral flow biosensor (LAMP-LFB) assay, was developed and evaluated for detection of MTBC. Two sets of primers, which targeted IS6110 and IS1081 sequences of MTBC, were designed for establishment of multiplex LAMP-LFB assay. The amplicons were labelled with biotin and fluorescein isothiocyanate (FITC) by adding FITC labelled primer and biotin-14-dATP and biotin-14-dCTP and could be visualized using LFB. The optimal reaction conditions of multiplex LAMP-LFB assay confirmed were 66°C for 50 min. The analytical sensitivity of multiplex LAMP-LFB is 10 fg of genomic templates using pure culture, and no cross-reactivity with other common bacteria and non-tuberculous mycobacteria strains was obtained. A total of 143 clinical samples collected from 100 TB patients (62 definite TB cases and 38 probable TB cases) and 43 non-TB patients were used for evaluating the feasibility of multiplex LAMP-LFB assay. The multiplex LAMP-LFB (82.0%, 82/100) showed higher sensitivity than culture (47.0%, 47/100, P < 0.001) and Xpert MTB/RIF (54.0%, 54/100, P < 0.001). Importantly, the multiplex LAMP-LFB assay detected additional 28 probable TB cases, which increased the percentage of definite TB cases from 62.0% (62/100) to 90.0% (90/100). The specificity of multiplex LAMP-LFB assay in patients without TB was 97.7% (42/43). Therefore, multiplex LAMP-LFB assay is a simple, reliable, and sensitive method for MTBC detection, especially in probable TB cases and resource limited settings.

DNA Transformations for Diagnosis and Therapy

Due to its unique physical and chemical characteristics, DNA, which is known only as genetic information, has been identified and utilized as a new material at an astonishing rate. The role of DNA has increased dramatically with the advent of various DNA derivatives such as DNA-RNA, DNA-metal hybrids, and PNA, which can be organized into 2D or 3D structures by exploiting their complementary recognition. Due to its intrinsic biocompatibility, self-assembly, tunable immunogenicity, structural programmability, long stability, and electron-rich nature, DNA has generated major interest in electronic and catalytic applications. Based on its advantages, DNA and its derivatives are utilized in several fields where the traditional methodologies are ineffective. Here, the present challenges and opportunities of DNA transformations are demonstrated, especially in biomedical applications that include diagnosis and therapy. Natural DNAs previously utilized and transformed into patterns are not found in nature due to lack of multiplexing, resulting in low sensitivity and high error frequency in multi-targeted therapeutics. More recently, new platforms have advanced the diagnostic ability and therapeutic efficacy of DNA in biomedicine. There is confidence that DNA will play a strong role in next-generation clinical technology and can be used in multifaceted applications.

Fabrication of a T-Shaped Microfluidic Channel Using a Consumer Laser Cutter and Application to Monodisperse Microdroplet Formation

The use of micrometer-sized droplets for chemical and biochemical analysis has been widely explored. Photolithography is mainly used to fabricate microfluidic devices, which is often employed to form monodisperse microdroplets. Although photolithography enables precise microfabrication, it is not readily available to biochemists because it requires specialized equipment such as clean room and mask aligners, and expensive consumables such as photoresist and silicon wafers. In this study, we fabricated a microfluidic device using a consumer laser cutter and applied it to droplet formation. Monodisperse microdroplets were formed by using an oil phase for droplet digital polymerase chain reaction (PCR) as the continuous phase and phosphate-buffered saline or polyethylene glycol solution as the dispersed phase. The droplet size decreased as the flow rate of the continuous phase increased and approached a constant value. The method developed in this study can be used to realize microdroplet-based biochemical analysis with simple devices or to construct artificial cells.

Evaluation of Droplet Digital PCR Assay for the Diagnosis of Candidemia in Blood Samples

Numerous studies have shown that droplet digital PCR (ddPCR) is a promising tool for the diagnosis of pathogens, especially in samples with low concentrations of pathogenic DNA. An early diagnosis of candidemia is critical for the effective treatment of patients. In this study, we evaluated the sensitivity and specificity of ddPCR assay for Candida DNA detection both in vitro by mixing fungal cells with human blood and in vivo by analyzing blood samples from infected mice and patients with suspected candidemia. The results showed that ddPCR assay could detect a minimum of 4.5 DNA copies per reaction in blood samples. ddPCR showed higher sensitivity and specificity for Candida DNA detection than traditional culture and quantitative PCR (qPCR) methods and also exhibited significantly better positive and negative predictive values than the culture and qPCR methods that were commonly used in clinical practice. Hence, our study demonstrates that ddPCR assay is a promising method for the timely diagnosis of candidemia and could be useful for monitoring the treatment of candidemia.

Developing multiplex ddPCR assays for SARS-CoV-2 detection based on probe mix and amplitude based multiplexing

Introduction: With the ongoing SARS-CoV-2 pandemic, different articles have been published highlighting the superiority of droplet digital PCR (ddPCR) over the gold-standard reverse transcription PCR (RT-PCR) in SARS-CoV-2 detection. However, few studies have been reported on developing multiplex ddPCR assays for SARS-CoV-2 detection and their performance. This study shows steps on how to develop different ddPCR SAR-CoV-2 assays including higher order multiplex assays for SARS-CoV-2 detection and antiviral screening.Methods: Using multiple primer/probe sets, we developed, optimized, and analyzed the performance of simplex (1 target), duplex (2 targets), triplex probe mix (3 targets), and quadruplex (4 targets) SARS-CoV-2 ddPCR assays based on a two-color ddPCR detection system.Results: Results showed that the quadruplex assay had similar limits of detection and accuracy to the lower multiplex assays. Analyzing 94 clinical samples demonstrated that the ddPCR triplex probe mix assay had better sensitivity than the RT-qPCR assay. Additionally, the ddPCR multiplex assay showed that remdesivir could inhibit the growth of SARS-CoV-2 in vitro while another testing drug could not.Conclusion: Our research shows that developing multiplex ddPCR assays is possible by combing probe mix and amplitude-based multiplexing, which will help in developing multiplexed ddPCR assays for different SARS-CoV-2 applications.

Analysis and validation of a highly sensitive one-step nested quantitative real-time polymerase chain reaction assay for specific detection of severe acute respiratory syndrome coronavirus 2

BACKGROUND

Coronavirus disease 2019 (COVID-19), caused by SARS-CoV-2, is posing a serious threat to global public health. Reverse transcriptase real-time quantitative polymerase chain reaction (qRT-PCR) is widely used as the gold standard for clinical detection of SARS-CoV-2. Due to technical limitations, the reported positive rates of qRT-PCR assay of throat swab samples vary from 30 to 60%. Therefore, the evaluation of alternative strategies to overcome the limitations of qRT-PCR is required. A previous study reported that one-step nested (OSN)-qRT-PCR revealed better suitability for detecting SARS-CoV-2. However, information on the analytical performance of OSN-qRT-PCR is insufficient.

METHOD

In this study, we aimed to analyze OSN-qRT-PCR by comparing it with droplet digital PCR (ddPCR) and qRT-PCR by using a dilution series of SARS-CoV-2 pseudoviral RNA and a quality assessment panel. The clinical performance of OSN-qRT-PCR was also validated and compared with ddPCR and qRT-PCR using specimens from COVID-19 patients.

RESULT

The limit of detection (copies/ml) of qRT-PCR, ddPCR, and OSN-qRT-PCR were 520.1 (95% CI: 363.23-1145.69) for ORF1ab and 528.1 (95% CI: 347.7-1248.7) for N, 401.8 (95% CI: 284.8-938.3) for ORF1ab and 336.8 (95% CI: 244.6-792.5) for N, and 194.74 (95% CI: 139.7-430.9) for ORF1ab and 189.1 (95% CI: 130.9-433.9) for N, respectively. Of the 34 clinical samples from COVID-19 patients, the positive rates of OSN-qRT-PCR, ddPCR, and qRT-PCR were 82.35% (28/34), 67.65% (23/34), and 58.82% (20/34), respectively.

CONCLUSION

In conclusion, the highly sensitive and specific OSN-qRT-PCR assay is superior to ddPCR and qRT-PCR assays, showing great potential as a technique for detection of SARS-CoV-2 in patients with low viral loads.

Tuberculosis diagnostics: overcoming ancient challenges with modern solutions

Rapid, sensitive, accurate and portable diagnostics are a mainstay of modern medicine. Tuberculosis is a disease that has been with us since time immemorial and, despite the fact that it can be treated and cured, it still remains the world's biggest infectious killer, taking the lives of millions annually. There have been important developments in the diagnostic devices for tuberculosis however, these are often prone to error, expensive, lack the necessary sensitivity or accuracy and, crucially, not sufficiently portable and thus not applicable in the remote, rural areas, where they are most needed. Modern solutions have been emerging in the past decade, seeking to overcome many of the inhibiting issues in this field by utilising recent advances in molecular biology, genetics and sequencing or even completely ‘reinventing the wheel’, by developing novel and unprecedented diagnostic techniques. In this mini review, the issues and challenges arising from the historical methods of diagnosing tuberculosis are discussed, followed by outlaying their particular lack of appropriateness for regions of the world where tuberculosis still remains endemic. Subsequently, more recent developments of new methods and technological advancements as ‘modern weapons’ in the battle to defeat this disease and associated challenges are reviewed, and finally an outlook is presented, highlighting the future of the modern solutions under development, which are envisioned to lay the platform for improvements in delivering timely intervention, reduce immense expense and burden on healthcare systems worldwide, while saving millions of lives and eventually, may enable the eradication of this ancient disease.

Using droplet digital PCR in the detection of Mycobacterium tuberculosis DNA in FFPE samples

BACKGROUND

Droplet digital PCR (ddPCR) is a technology that has higher sensitivity than real-time PCR for the identification of trace DNA. However, the use of ddPCR for the detection of Mycobacterium tuberculosis DNA in pathological samples has not been fully studied.

METHODS

A total of 65 formalin-fixed and paraffin-embedded (FFPE) specimens were included in this study. Twenty samples with definite results for tuberculosis (TB) were used to establish the ddPCR system for TB detection. ddPCR was then conducted to detect TB DNA in the 45 patients who were classified as 'possible TB' (real-time PCR results in the gray area, Ziehl-Neelsen staining-negative, and hematoxylin and eosin staining showing morphology suspicious for TB). The clinical treatment and disease outcomes were followed to assess the accuracy of ddPCR in the detection of TB DNA.

RESULTS

Among the 45 possible TB samples, 26 were ddPCR-positive, 12 were ddPCR-negative, and seven were in the gray area. ddPCR improved the positive rate of 57.8% (26/45) for the samples that were in the gray area by real-time PCR. Moreover, several patients received anti-TB therapy, and the effective ratio of therapy for the ddPCR-positive, ddPCR-negative, and ddPCR-gray area cases was 61.9% (13/21), 50.0% (2/4), and 33.3% (1/3), respectively.

CONCLUSIONS

ddPCR is more sensitive for detecting mild TB via FFPE samples than real-time PCR. The ddPCR method is of additional value in the diagnosis of TB from pathological samples.

Ocular cytomegalovirus latency exacerbates the development of choroidal neovascularization

Age-related macular degeneration (AMD) is a complex, multifactorial, progressive disease which represents a leading cause of irreversible visual impairment and blindness in older individuals. Human cytomegalovirus (HCMV), which infects 50-80% of humans, is usually acquired during early life and persists in a latent state for the life of the individual. In view of its previously described pro-angiogenic properties, we hypothesized that cytomegalovirus might be a novel risk factor for progression to an advanced form, neovascular AMD, which is characterized by choroidal neovascularization (CNV). The purpose of this study was to investigate if latent ocular murine cytomegalovirus (MCMV) infection exacerbated the development of CNV in vascular endothelial growth factor (VEGF)-overexpressing VEGF-A^hyper mice. Here we show that neonatal infection with MCMV resulted in dissemination of virus to various organs throughout the body including the eye, where it localized principally to the choroid in both VEGF-overexpressingVEGF-A^hyper and wild-type(WT) 129 mice. By 6 months post-infection, no replicating virus was detected in eyes and extraocular tissues, although virus DNA was still present in all eyes and extraocular tissues of both VEGF-A^hyper and WT mice. Expression of MCMV immediate early (IE) 1 mRNA was detected only in latently infected eyes of VEGF-A^hyper mice, but not in eyes of WT mice. Significantly increased CNV was observed in eyes of MCMV-infected VEGF-A^hyper mice compared to eyes of uninfected VEGF-A^hyper mice, while no CNV lesions were observed in eyes of either infected or uninfected WT mice. Protein levels of several inflammatory/angiogenic factors, particularly VEGF and IL-6, were significantly higher in eyes of MCMV-infected VEGF-A^hyper mice, compared to uninfected controls. Initial studies of ocular tissue from human cadavers revealed that HCMV DNA was present in four choroid/retinal pigment epithelium samples from 24 cadavers. Taken together, our data suggest that ocular HCMV latency could be a significant risk factor for the development of AMD. © 2020 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd.

Development and Evaluation of a Single Dye Duplex Droplet Digital PCR Assay for the Rapid Detection and Quantification of Mycobacterium tuberculosis

Droplet digital PCR (ddPCR) is a third generation of PCR that was recently developed to overcome the challenges of real-time fluorescence-based quantitative PCR (qPCR) in absolute quantification of pathogens. Few studies have been done on tuberculosis (TB) detection and quantification using ddPCR despite its many advantages over qPCR. From the few studies, none explores a single dye duplex assay for the detection and quantification of TB. In this study, steps toward developing and evaluating a duplex single dye (FAM) assay for detecting two targets (IS6110 and IS1081) are clearly described using simplex and duplex experiments. To achieve this, various parameters are investigated, including annealing temperature, primer and probe concentration, sensitivity and specificity, sample concentration, and inter/intra-assay variability. From the results, primer and probe concentration, annealing temperature, and sample concentration have an effect on the position and separation of droplets in both simplex and duplex assays. The copies of target genes in a duplex assay can be estimated accurately using the threshold tool with little inter-assay (CV <1%) and intra-assay (CV <6%) variability when compared to simplex assays. The ddPCR assay specificity and sensitivity are both 100% when compared to qPCR. This work shows steps toward the detection and quantification of two targets in a single channel, enabling higher multiplexing to include more targets in future works.

Long-Distance Phasing of a Tentative "Enhancer" Single-Nucleotide Polymorphism With CYP2D6 Star Allele Definitions

BACKGROUND

The CYP2D6 gene locus has been extensively studied over decades, yet a portion of variability in CYP2D6 activity cannot be explained by known sequence variations within the gene, copy number variation, or structural rearrangements. It was proposed that rs5758550, located 116 kb downstream of the CYP2D6 gene locus, increases gene expression and thus contributes to variability in CYP2D6 activity. This finding has, however, not been validated. The purpose of the study was to address a major technological barrier, i.e., experimentally linking rs5758550, also referred to as the "enhancer" single-nucleotide polymorphism (SNP), to CYP2D6 haplotypes >100 kb away. To overcome this challenge is essential to ultimately determine the contribution of the "enhancer" SNP to interindividual variability in CYP2D6 activity.

METHODS

A large ethnically mixed population sample (n=3,162) was computationally phased to determine linkage between the "enhancer" SNP and CYP2D6 haplotypes (or star alleles). To experimentally validate predicted linkages, DropPhase2D6, a digital droplet PCR (ddPCR)-based method was developed. 10X Genomics Linked-Reads were utilized as a proof of concept.

RESULTS

Phasing predicted that the "enhancer" SNP can occur on numerous CYP2D6 haplotypes including CYP2D6*1, *2, *5, and *41 and suggested that linkage is incomplete, i.e., a portion of these alleles do not have the "enhancer" SNP. Phasing also revealed differences among the European and African ancestry data sets regarding the proportion of alleles with and without the "enhancer" SNP. DropPhase2D6 was utilized to confirm or refute the predicted "enhancer" SNP location for individual samples, e.g., of n=3 samples genotyped as *1/*41, rs5758550 was on the *41 allele of two samples and on the *1 allele of one sample. Our findings highlight that the location of the "enhancer" SNP must not be assigned by "default." Furthermore, linkage between the "enhancer" SNP and CYP2D6 star allele haplotypes was confirmed with 10X Genomics technology.

CONCLUSIONS

Since the "enhancer" SNP can be present on a portion of normal, decreased, or no function alleles, the phase of the "enhancer" SNP must be considered when investigating the impact of the "enhancer" SNP on CYP2D6 activity.