Ultrasonic-promoted rapid preparation of PVC/TiO2-BSA nanocomposites: Characterization and photocatalytic degradation of methylene blue

Protein-coated cobalt oxide-hydroxide nanospheres deliver photosensitizer IR780 iodide for near-infrared light-triggered photodynamic/photothermal/chemodynamic therapy against colon cancer

Phototherapy has garnered worldwide attention for its minimal invasiveness, controllability, and spatial selectivity in treating cancer. One promising approach involves the use of near-infrared dye IR780, which demonstrates both photodynamic therapy (PDT) and photothermal therapy (PTT) effects under 808 nm laser irradiation. However, this hydrophobic dye's toxicity and limited tumor targeting ability severely hamper its suitability for cancer applications. Herein, a biocompatible nanoplatform CoOOH-IR780@BSA (CoIRB) is developed to efficiently deliver IR780 and provide multi-mode treatments for colon tumors. Due to the nanocarrier coating, CoIRB nanoparticles demonstrated reliable dispersion and stability, and their biotoxicity was substantially reduced for safer blood circulation, which overcame the biological barrier of IR780. The nanoplatform has also shown considerable results in phototherapy in vivo and in vitro experiments, with successful inhibition of MC38 tumor growth through intravenous administration. Additionally, the introduction of cobalt ions could induce Fenton-like reactions to activate the production of toxic hydroxyl radicals (˙OH), exerting an assisted chemodynamic therapy (CDT) effect. Notably, these nanodrugs also exhibited potential as scavengers of reductive glutathione (GSH) and hydrogen sulfide (H2S), leading to amplifying oxidative damage of reactive oxygen species (ROS). Overall, the versatile therapeutic platform, CoIRB, has opened up considerable prospects as a biotherapeutic option for combining PDT/PTT/CDT against colon cancer.

Impact of ZnS/Mn on the Structure, Optical, and Electric Properties of PVC Polymer

The most efficient way to create novel materials that may be used in a variety of optoelectronic applications is thought to be doped mixed polymers with appropriate fillers. Undoped and doped PVC polymers with ZnS/Mn formed at different temperatures were fabricated using the casting method. The Rietveld method was used to discover the structure and microstructure of Zn_0.95Mn_0.05S prepared at T = 300, 400, and 500 °C. The distribution and existence of the nanofiller over the PVC matrix were determined via XRD, FTIR, EDS, and SEM techniques. The effect of the preparation temperatures of the ZnS/Mn nanofiller on the absorption, transmittance, reflectance, refractive index, extinction coefficient, dielectric constant, AC conductivity, electrical modulus, and DC conductivity activation energy data of the PVC polymer was studied using the diffused reflectance technique. Doping PVC with ZnS/Mn (prepared at 300 °C) lowered the direct and indirect optical band gaps from 5.4 and 4.52 eV to minimum values of 4.55 and 3.63 eV. The fluorescence intensity of pure PVC is greatly enhanced upon loading with ZnS/Mn. The PVC exhibited two near UV peaks, one violet and one blue color, while, in addition, the doped polymers exhibited green and orange colors. The corresponding CIE diagram for all the samples was also determined.

Synthesis of Mesoporous Silica Incorporated with Low Iron Concentration and Gelatin Co-Template via The Ultrasonication Method and Its Methylene Blue Photodegradation Performance

In this work, low iron concentration incorporated on mesoporous silica with gelatin co-template (Fe2O3/GSBA-15) has been successfully synthesized via the ultrasonication method. The physical, chemical, and structural properties of the samples were investigated with X-Ray Diffraction (XRD), Scanning Electron Microscope- Energy Dispersive X-Ray (SEM-EDX), Fourier Transform Infra-Red (FTIR), and N2 adsorption-desorption. Results showed good distribution of low concentration of iron oxide on the gelatin mesoporous silica GSBA-15. Elemental and surface analysis presented that iron oxide incorporation with higher concentration exhibited lower surface area due to the blocking pore. The highest photocatalytic activity on the methylene blue dye degradation was achieved at 10% Fe2O3/GSBA-15 with ~80% efficiency. The results revealed that the photocatalytic activity of Fe2O3/GSBA-15 enhanced with the presence of iron oxide. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Hybrid magnetic core-shell TiO2@CoFe3O4 composite towards visible light-driven photodegradation of Methylene blue dye and the heavy metal adsorption: isotherm and kinetic study

Magnetic core-shell TiO₂@CoFe₃O₄ (TCM) composite photocatalytic particles with a core-shell structure were synthesized by the co-precipitation method as a novel catalyst for methylene blue (MB) dye degradation and adsorption efficiency of heavy-metal ion Pb(II) from aqueous solution. Various analytical techniques have verified the formation of the TCM core-shell through TEM, XRD, FT-IR, Raman, PL, and UV analysis. The presence of TiO₂ and cobalt magnetite in the TCM core shell is confirmed by XRD analysis. The formation of a homogenous CoFe₃O₄shell on TiO₂ spheres is confirmed by HR-TEM investigation. TiO₂ nanoparticle has a rutile structure with an average crystallite size of about 57.44 and a TCM core-shell of about 64.62 nm. From UV and PL studies, it was found that the core shell absorbs the visible range of the electromagnetic spectrum, which improves the effective separation between photo carriers. This study focused on several factors that influence metal ion adsorption, including initial concentrations, adsorbent dose, pH, and contact time. The TCM nanocomposite successfully separated the heavy metal ion Pb(II) from aqueous solutions, and the model predictions exactly matched the experimental results. For TCM material, the maximum adsorption efficiency for Pb(II) was 33.09 mg/g. The photocatalytic performance of TiO₂ and TCM is about 12% and 91% after 60 min for MB dye degradation. It was found that TiO₂@CoFe₃O₄ core-shell nanoparticles perform better as photo catalysts than pure TiO₂ and CoFe₃O₄due to their high efficiency and reusability. Furthermore, the analysis revealed that heavy metal adsorption from aqueous solutions could be reused over seven cycles with no adsorption capacity modification.

Nonisothermal Kinetic Analysis and AC Conductivity for Polyvinyl Chloride (PVC)/Zinc Oxide (ZnO) Nanocomposite

The behavior of polyvinyl chlorine (PVC)/zinc oxide (ZnO) nanoparticles was investigated. To improve the dispersion and distribution of zinc nanoparticles within the host polymer (PVC), they were treated with water before being added to the polymer. The nanocomposite samples were prepared by casting method using different weight ratios of ZnO nanoparticles. The prepared nanocomposite samples were characterized by thermogravimetric analysis (TGA). Both thermal stability and kinetic analysis of the prepared samples were investigated. The ZnO nanoparticles lower the activation energy and decrease the thermal stability of PVC. Kissinger, Flynn-Wall-Ozawa, and Kissinger-Akahira-Sunose models were used in the nonisothermal kinetic analysis of PVC/ZnO nanocomposite samples. The thermal stability behavior due to the addition of zinc oxide nanoparticles was explained and correlated with the behavior of the kinetic parameters of the samples. The AC conductivity as function of frequency and temperature was also investigated. The addition of ZnO nanoparticle increases the AC conductivity, and the temperature-independent region decreased by increasing temperature. Both S and A coefficients were predicted using the Jonscher power law and OriginLab software. The trends of S and A coefficients were discussed based on the glass transition of the host polymer.

Sonophotocatalytic disinfection of Shigella species under visible light irradiation: Insights into its molecular mechanism, antibacterial resistance and biofilm formation

Microbial contamination of water is one of the major sources of many diseases worldwide. Evolution of antibacterial resistance (ABR) alongside the caveats in most of the water treatment methods causes the severity of the current problem extremely vexing. This calls for an urgent need to develop new treatment methods aiming to reduce the microbial as well as ABR load in the environment. Herein, we successfully developed a visible light assisted sonophotocatalysis (SPC) using Fe/ZnO nanoparticles (NPs) for the disinfection of Shigella dysenteriae. A consortia containing S. dysenteriae and S. flexineri was also completely disinfected using SPC. Growth conditions of S. dysenteriae like growth phases and growth temperaturehad different outcomes on the overall efficacy of SPC. Compared with catalysts such as ZnO and TiO₂, Fe/ZnO resulted in better disinfection. Multi-ROS production, mostly containing h⁺ and O₂· radicals, due to the electron displacement in the catalyst and acoustic cavitation was identified as the factors behind bacterial lethality. The ROS produced was found to interfere with the metabolic activities of S. dysenteriae by causing membrane perturbation. We identified DNA damage inside the cells and the subsequent release of intracellular components. The compositional changes in the fatty acid makeup of the cells were altered as a result of SPC and few fatty acid markers indicating the stress posed by SPC were also identified. Loss of ABR in S. dysenteriae was also recorded post SPC treatment. Abatement in the biofilm forming ability of the injured bacterial cells was also recorded, proving the extremity of stress induced by SPC. Hence, the excellent efficacy of SPC in disinfecting bacteria is proposed for tertiary water treatment applications.

Ultrasound-assisted method to improve the structure of CeO2@polyprrole core-shell nanosphere and its photocatalytic reduction of hazardous Cr6

In this work, the CeO₂@polypyrrole (CeO₂@PPy) core-shell nanosphere has been synthesized via an ultra-sonication method using bath type (WUC-D22H, Daihan Scientific, Korea) and they are utilized for the photo-reduction of hazardous Cr⁶⁺ to benign Cr³⁺. The ultrasonic frequency and power were 20 kHz and 100 W, respectively. The PPy shielded CeO₂ in aqueous solution could prevent the dissolution of CeO₂ and to improve the photocatalytic ability of CeO₂. X-ray diffraction was used to confirm the crystalline structure of as prepared CeO₂@PPy core-shell and FT-IR was used to identify the functional groups. The uniform sized core of PPy and shell of CeO₂ were observed by transition electron microscopy. The ultrasonic assisted synthesized CeO₂@PPy core-shell exhibits a narrow bandgap (UV-DRS) and good reduction efficiency with higher reusability and stability compared to pure CeO₂, PPy and mechanical mixing of CeO₂@PPy. Moreover, the synergistic effect of CeO₂ and PPy core-shell structure facilitate a higher electron transfer rate and prolong lifetime of photogenerated electron-hole pairs which can achieve good reduction rate of 98.6% within 30 min. In particular, the pH, catalyst, and Cr⁶⁺ concentration effects were optimized in photocatalytic reduction reactions. Meanwhile, this photocatalysis with fast and effective electron transfer mechanism for the Cr⁶⁺ reduction was elucidated. This method opens a new window for simple fabrication of conducting polymers-based metal oxide nanocomposite towards wastewater remediation and beyond.

Facile sonochemical-assisted synthesis of Cu/ZnO/Al2O3 nanocomposites under vacuum: Optical and photocatalytic studies

This paper reports on the synthesis of Cu/ZnO/Al₂O₃ nanocomposites via a facile sonochemical-assisted approach using new starting reactants. This study was conducted to synthesis and photocatalytic evaluation of the Cu/ZnO/Al₂O₃ nanocomposite in vacuum conditions. The XRD results showed that Cu/ZnO/Al₂O₃ and CuO/ZnO/Al₂O₃ nanocomposites could be obtained after annealing at 600 °C for 3 h in vacuum conditions and in the air, respectively. The effects of Cu:Zn:Al ratio, ultrasonic irradiation, power, time, and capping agent on the product composition and morphology were also studied. Finally, the efficiency of various as-synthesized Cu/ZnO/Al₂O₃ nanocomposites for decolorization of methylene blue were evaluated. According to the results, using ultrasonic irradiation and annealing under vacuum, the efficiency is improved up to 100%. Because in this situation Cu/Cu₂O/ZnO/Al₂O₃ is formed, which has a better absorption (due to Cu₂O) and conductivity (due to Cu) than CuO/ZnO/Al₂O₃ for the photocatalysis process.

Ultrasonic synthesis of CuO nanoflakes: A robust electrochemical scaffold for the sensitive detection of phenolic hazard in water and pharmaceutical samples

Hydroquinone (HQ), a phenolic compound is expansively used in many industrial applications and due to the utilization of HQ, water pollution tragedies frequently found by the improper handling and accidental outflows. When HQ is adsorbed directly through the skin that create toxic effects to human by affecting kidney, liver, lungs, and urinary tract and hence, a highly selective and sensitive technique is required for its quantification. Herein, we have developed the ultrasonic synthesis of copper oxide nanoflakes (CuO-NFs) using ultrasonic bath (20 kHz, 100 W) and successfully employed for the sensitive detection of the environmental hazardous pollutant HQ. The formed CuO-NFs were confirmed by X-ray diffraction, field emission scanning electron microscopy (FE-SEM), FT-IR spectroscopy and UV-visible spectroscopy and fabricated with the screen-printed carbon electrode (SPCE). The SEM images exhibited the uniform CuO-NFs with an average width of 85 nm. The linker-free CuO-NFs fabricated electrode showed the appropriate wide range of concentrations from 0.1 to 1400 µM and the limit of detection was found to be 10.4 nM towards HQ. The fabricated sensor having long term stability and sensitivity was successfully applied for the environmental and commercial real sample analysis and exhibited good recovery percentage, implying that the SPCE/CuO-NFs is an economically viable and benign robust scaffold for the determination of HQ.

Ultrasonic-assisted in-situ fabrication of BiOBr modified Bi2O2CO3 microstructure with enhanced photocatalytic performance

Via an ultrasonic-assisted in-situ etching method, BiOBr modified Bi₂O₂CO₃ microstructures were fabricated in short time. The samples were characterized by XRD, SEM, TEM, BET, UV-Vis, XPS and PL spectra methods. Rhodamine B (RhB) aqueous solution was applied to evaluate the photocatalytic activities of the as-prepared samples. The results showed that the sample prepared at pH of 2 in which the molar ratio of BiOBr and Bi₂O₂CO₃ was 0.69:1 had the largest specific surface area, the best utilization for ultraviolet and visible light and efficient separation efficiency of charge carriers, contributing to its best photocatalytic activity. O₂^- was proved to be main active species in RhB photodegradation process. Last, the photocatalytic mechanism of the composite was discussed in detail.