Removal of micropollutants by an electrochemically driven UV/chlorine process for decentralized water treatment

Removal of antibiotic resistant bacteria and antibiotic resistance genes by an electrochemically driven UV/chlorine process for decentralized water treatment

The UV/chlorine (UV/Cl2) process is a developing advanced oxidation process and can efficiently remove antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs). However, the transportation and storage of chlorine solutions limit the application of the UV/Cl2 process, especially for decentralized water treatment. To overcome the limitation, an electrochemically driven UV/Cl2 process (E-UV/Cl2) where Cl2 can be electrochemically produced in situ from anodic oxidation of chloride (Cl-) ubiquitously present in various water matrices was evaluated in this study. >5-log inactivation of the ARB (E. coli) was achieved within 5 s of the E-UV/Cl2 process, and no photoreactivation of the ARB was observed after the treatment. In addition to the ARB, intracellular and extracellular ARGs (tetA, sul1, sul2, and ermB) could be effectively degraded (e.g., log(C0/C) > 4 for i-ARGs) within 5 min of the E-UV/Cl2 process. Atomic force microscopy showed that the most of the i-ARGs were interrupted into short fragments (< 30 nm) during the E-UV/Cl2 process, which can thus effectively prevent the self-repair of i-ARGs and the horizontal gene transfer. Modelling results showed that the abatement efficiencies of i-ARG correlated positively with the exposures of •OH, Cl2-•, and ClO• during the E-UV/Cl2 process. Due to the short treatment time (5 min) required for ARB and ARG removal, insignificant concentrations of trihalomethanes (THMs) were generated during of the E-UV/Cl2 process, and the energy consumption (EEO) of ARG removal was ∼0.20‒0.27 kWh/m3-log, which is generally comparable to that of the UV/Cl2 process (0.18-0.23 kWh/m3-log). These results demonstrate that the E-UV/Cl2 process can provide a feasible and attractive alternative to the UV/Cl2 process for ARB and ARG removal in decentralized water treatment system.

Electrochemically producing high-valent iron-oxo species for phenolics-laden high chloride wastewater pretreatment

Electrochemical advanced oxidation processes (EAOPs) have shown great promise for treating industrial wastewater contaminated with phenolic compounds. However, the presence of chloride in the wastewater leads to the production of undesirable chlorinated organic and inorganic byproducts, limiting the application of EAOPs. To address this challenge, we investigated the potential of incorporating Fe(II) and Fe(III) into the EAOPs with a boron-doped diamond (BDD) anode under near-neutral conditions. Our findings revealed that both Fe(II) and Fe(III) facilitated the generation of high-valent iron-oxo species (Fe(IV) and Fe(V)) in the anodic compartment, thereby reducing the oxidation contribution of reactive chlorine species. Remarkably, the addition of 1000 μM Fe(II) under high chloride conditions resulted in over a 2.8-fold increase in the oxidation rate of 50 μM phenolic contaminants at pH 6.5. Furthermore, 1000 μM Fe(II) contributed to a reduction of more than 66% in the formation of chlorinated byproducts, consequently enhancing the biodegradability of the treated water. Additionally, transitioning from batch mode to continuous flow mode further amplified the positive effects of Fe(II) on the EAOPs. Overall, this study presents a modified electrochemical approach that simultaneously enhanced the degradation of phenolic contaminants and improved the biodegradability of wastewater with high chloride concentrations.

MXene/Carbon Nanocomposites for Water Treatment

One of the most critical problems faced by modern civilization is the depletion of freshwater resources due to their continuous consumption and contamination with different organic and inorganic pollutants. This paper considers the potential of already discovered MXenes in combination with carbon nanomaterials to address this problem. MXene appears to be a highly promising candidate for water purification due to its large surface area and electrochemical activity. However, the problems of swelling, stability, high cost, and scalability need to be overcome. The synthesis methods for MXene and its composites with graphene oxide, carbon nanotubes, carbon nanofibers, and cellulose nanofibers, along with their structure, properties, and mechanisms for removing various pollutants from water, are described. This review discusses the synthesis methods, properties, and mechanisms of water purification using MXene and its composites. It also explores the fundamental aspects of MXene/carbon nanocomposites in various forms, such as membranes, aerogels, and textiles. A comparative analysis of the latest research on this topic shows the progress in this field and the limitations for the practical application of MXene/carbon nanocomposites to solve the problem of drinking water scarcity. Consequently, this review demonstrates the relevance and promise of the material and underscores the importance of further research and development of MXene/carbon nanocomposites to provide effective water treatment solutions.

Sequential high-recovery nanofiltration and electrochemical degradation for the treatment of pharmaceutical wastewater

The presence of antibiotics in aquatic ecosystems poses a significant concern for public health and aquatic life, owing to their contribution to the proliferation of antibiotic-resistant bacteria. Effective wastewater treatment strategies are needed to ensure that discharges from pharmaceutical manufacturing facilities are adequately controlled. Here we propose the sequential use of nanofiltration (NF) for concentrating a real pharmaceutical effluent derived from azithromycin production, followed by electrochemical oxidation for thorough removal of pharmaceutical compounds. The NF membrane demonstrated its capability to concentrate wastewater at a high recovery value of 95 % and 99.7 ± 0.2 % rejection to azithromycin. The subsequent electrochemical oxidation process completely degraded azithromycin in the concentrate within 30 min and reduced total organic carbon by 95 % in 180 min. Such integrated treatment approach minimized the electrochemically-treated volume through a low-energy membrane approach and enhanced mass transfer towards the electrodes, therefore driving the process toward zero-liquid-discharge objectives. Overall, our integrated approach holds promises for cost-effective and sustainable removal of trace pharmaceutical compounds and other organics in pharmaceutical wastewater.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Advanced oxidation processes for water and wastewater treatment - Guidance for systematic future research

Advanced oxidation processes (AOPs) are a growing research field with a large variety of different process variants and materials being tested at laboratory scale. However, despite extensive research in recent years and decades, many variants have not been transitioned to pilot- and full-scale operation. One major concern are the inconsistent experimental approaches applied across different studies that impede identification, comparison, and upscaling of the most promising AOPs. The aim of this tutorial review is to streamline future studies on the development of new solutions and materials for advanced oxidation by providing guidance for comparable and scalable oxidation experiments. We discuss recent developments in catalytic, ozone-based, radiation-driven, and other AOPs, and outline future perspectives and research needs. Since standardized experimental procedures are not available for most AOPs, we propose basic rules and key parameters for lab-scale evaluation of new AOPs including selection of suitable probe compounds and scavengers for the measurement of (major) reactive species. A two-phase approach to assess new AOP concepts is proposed, consisting of (i) basic research and proof-of-concept (technology readiness levels (TRL) 1-3), followed by (ii) process development in the intended water matrix including a cost comparison with an established process, applying comparable and scalable parameters such as UV fluence or ozone consumption (TRL 3-5). Subsequent demonstration of the new process (TRL 6-7) is briefly discussed, too. Finally, we highlight important research tools for a thorough mechanistic process evaluation and risk assessment including screening for transformation products that should be based on chemical logic and combined with complementary tools (mass balance, chemical calculations).

Experimental and theoretical insight into carbamazepine degradation by chlorine-based advanced oxidation processes: Efficiency, energy consumption, mechanism and DBPs formation

Chlorine has been widely used in different advanced oxidation processes (AOPs) for micropollutants removal. In this study, different chlorine-based AOPs, namely medium pressure (MP) UV/chlorine, low pressure (LP) UV/chlorine, and in-situ chlorination, were compared for carbamazepine (CBZ) removal efficiency, energy consumption, and disinfection by-products (DBPs) formation. All three processes could achieve nearly 100% CBZ removal, while the reaction time needed by in-situ chlorination was double the time required by UV/chlorine processes. The energy consumed per magnitude of CBZ removed (EE/O) of MP UV/chlorine was 13 times higher than that of LP UV/chlorine, and relative to that of in-situ chlorination process. Accordingly, MP and LP UV/chlorine processes generated one to two orders of magnitude more hydroxyl radicals (•OH) and reactive chlorine species (RCS) than in-situ chlorination. Besides, RCS were the dominant reactive species, contributing to 78.3%, 75.6%, and 71.6% of CBZ removal in MP, LP UV/chlorine, and in-situ chlorination, respectively. According to the Gibbs free energy barriers between CBZ and RCS/•OH calculated based on density functional theory (DFT), RCS had more reaction routes with CBZ and showed lower energy barrier in the main CBZ degradation pathways like epoxidation and formation of iminostilbene. When applied to secondary wastewater effluent, UV/chlorine and in-situ chlorination produced overall DBPs ranging from 104.77 to 135.41 µg/L. However, the production of chlorate during UV/chlorine processes was 15 times higher than that during in-situ chlorination.

Enhanced electrochemical degradation of perfluorooctanoic acid by ligand-bridged PtII at Pt anodes

A new mechanism for the electro-oxidation (EO) degradation of perfluorooctanoic acid (PFOA) by Pt anode was reported. Using bridge-based ligand anions (SCN-, Cl- and N3-) as electrolytes, the degradation effect of PFOA by Pt-EO system was significant. Characterization of the Pt anode, the detection and addition of dissolved platinum ions, and the comparison of Pt with DSA anodes determined that the Pt- ligand complexes resulting from the specific binding of anodically dissolved PtII with ligand ions and C7F15COO- ((C7F15-COO)PtII-L3, L = SCN-, Cl- and N3-) on the electrode surface played a decisive role in the degradation of PFOA. Density functional theory (DFT) calculations showed that inside (C7F15-COO)PtII-L3 complexes, the electron density of the perfluorocarbon chain (including the F atom) compensated toward the carboxyl group and electrons in the PFOA ion transferred to the PtII-Cl3. Moreover, the (C7F15-COO)PtII-Cl3, as a whole, was calculated to migrate electrons toward the Pt anode, leading to the formation of PFOA radical (C7F15-COO•). Finally, with the detection of a series of short chain homologues, the CF2-unzipping degradation pathway of PFOA was proposed. The newly developed Pt-EO system is not affected by water quality conditions and can directly degrade alcohol eluent of PFOA, which has great potential for treating industrial wastewater contaminated with PFOA.

Electro-oxidation and UV irradiation coupled method for in-site removing pollutants from human body fluids in swimming pool

A comprehensive study was conducted to investigate how ultraviolet (UV) irradiation combined with electrochemistry (EC) can efficiently remove human body fluids (HBFs) related pollutants, such as urea/creatinine/hippuric acid, from swimming pool water (SPW). In comparison with the chlorination, UV, EC, and UV/chlorine treatments, the EC/UV treatment exhibited the highest removal rates for these typical pollutants (TPs) from HBFs in synthetic SPW. Specifically, increasing the operating current of the EC/UV process from 20 to 60 mA, as well as NaCl content from 0.5 to 3.0 g/L, improved urea and creatinine degradation while having no influence on hippuric acid. In contrast, EC/UV process was resilient to changes in water parameters (pH, HCO3-, and actual water matrix). Urea removal was primarily attributable to reactive chlorine species (RCS), whereas creatinine and hippuric acid removal were primarily related to hydroxyl radical, UV photolysis, and RCS. In addition, the EC/UV procedure can lessen the propensity for creatinine and hippuric acid to generate disinfection by-products. We can therefore draw the conclusion that the EC/UV process is a green and efficient in-situ technology for removing HBFs related TPs from SPW with the benefits of needless chlorine-based chemical additive, easy operation, continuous disinfection efficiency, and fewer byproducts production.

Synergistic mechanisms between chlorine-mediated electrochemical advanced oxidation and ultraviolet light for ammonia removal

The combination of chlorine-mediated electrochemical advanced oxidation (Cl-EAO) and ultraviolet (UV) radiation (UV-E/Cl) can efficiently remove ammonia from wastewater. However, the synergistic mechanisms between Cl-EAO and UV need to be explored in more detail. Thus, in this study, the ammonia oxidation performance of Cl-EAO and UV-E/Cl systems were compared, while the synergistic mechanisms were identified by the performance of UV/chlorine oxidation (UV-ClO) system and the results of electron paramagnetic resonance (EPR) analysis, free radical inhibition assays, and determination of steady-state concentration of free radicals. It was found that, compared with the Cl-EAO system, UV increased the ammonia removal rate by 42.85% and reduced the active chlorine concentration (56.64%) and nitrate yield (53.61%). In the Cl-EAO, and UV-E/Cl systems, Cl• were detected, and the free radical inhibition assays and determination of steady-state concentration of free radicals suggested that UV increased the concentration of Cl• by 51.47%, resulting in Cl• becoming the major contributor to ammonia oxidation in the UV-E/Cl system. Besides, UV also increase the concentrations of HO• and Cl2•-, which further promoted the organic matter removal in the real domestic wastewater. This study also discussed the ammonia oxidation performance of the UV-E/Cl system in real domestic wastewater, even with the presence of significant levels of organic and inorganic anions in the wastewater, UV increased the ammonia oxidation by 21.95%. The results of this study thus clarify the mechanisms and potential applications of UV-E/Cl technology.

Photo-anammox by vacuum ultraviolet tandem chlorine

Excessive ammonia (NH4+) discharge can lead to algal blooms and disrupt water sustainability, so its control is imperative. Although microbiology-triggered anammox process is promising, its application is limited due to time-consuming cultivation of specific microorganisms and need for skilled operation. To bypass these barriers, this study proposed and verified a photo-induced anammox technology that removes NH4+ and total nitrogen (TN) from water by ultraviolet (UV)/vacuum UV (VUV)/chlorine under anoxic conditions. Under the Cl/N mass ratio of 5:1, the anoxic VUV/UV/chlorine process achieved 66.8% removal of 10 mg-N/L NH4+ within 10 min along with 57.8% reduction in TN. Besides the evidence from TN loss, this study confirmed nitrogen gas (N2) as the primary degradation product at low dissolved oxygen (DO) concentration of 2.0 mg/L. The selective conversion of NH4+ into N2 was mainly attributed to reactive nitrogen species (RNS, 42.5%) and reactive chlorine species (RCS, 57.5%). The TN removal efficiency was insensitive to certain variations of pH (7.0-9.0), NH4+ concentration (1-30 mg-N/L), chloride (50-125 mg/L), and sulfate (25-100 mg/L), but sensitive to DO and bicarbonate (25-100 mg/L). Given its robustness and high efficiency, the anoxic VUV/UV/chlorine technology may serve as a potentially promising alternative for NH4+ and TN alleviation in wastewater.

Recent developments on advanced oxidation processes for degradation of pollutants from wastewater with focus on antibiotics and organic dyes

The existence of various pollutants in water environment contributes to global pollution and poses significant threats to humans, wildlife, and other living beings. The emergence of an effective, realistic, cost-effective, and environmentally acceptable technique to treat wastewater generated from different sectors is critical for reducing pollutant accumulation in the environment. The electrochemical advanced oxidation method is a productive technology for treating hazardous effluents because of its potential benefits such as lack of secondary pollutant and high oxidation efficiency. Recent researches on advanced oxidation processes (AOPs) in the period of 2018-2022 are highlighted in this paper. This review emphasizes on recent advances in electro-oxidation (EO), ozone oxidation, sonolysis, radiation, electro-Fenton (EF), photolysis and photocatalysis targeted at treating pharmaceuticals, dyes and pesticides polluted effluents. In the first half of the review, the concept of the AOPs are discussed briefly. Later, the influence of increasing current density, pH, electrode, electrolyte and initial concentration of effluents on degradation are discussed. Lastly, previously reported designs of electrochemical reactors, as well as data on intermediates generated and energy consumption during the electro oxidation and Fenton processes are discussed. According to the literature study, the electro-oxidation technique is more appropriate for organic compounds, whilst the electro-Fenton technique appear to be more appropriate for more complex molecules.

Comprehensive analysis of research trends and prospects in electrochemical advanced oxidation processes (EAOPs) for wastewater treatment

Electrochemical advanced oxidation processes (EAOPs) have emerged as a promising approach for efficient wastewater treatment. However, despite their promising potential, there is a lack of comprehensive analysis regarding the research trends, bibliometric data, and research frontiers of EAOPs. To address this gap, this study conducted a thorough and comprehensive analysis of 2347 related articles in the Web of Science Core Collection Database from 2012 to 2022. The analysis included information on countries, authors, institutions, and more, with a focus on summarizing trends and cutting-edge research hotspots in the field. The University of Barcelona in Spain is the most effective institution. Brillas E. is the most productive author in the world. Research hotspots in EAOPs have evolved from traditional anodic oxidation (AO) to novel electro-Fenton (EF) technology, which focuses on efficient generation of H2O2 and the use of metal-organic frameworks to enhance performance and efficiency. Through systematic research hotspot analysis, the importance of performance comparison of different types of EAOPs, development of new materials, optimization of device parameters, and toxicity assessment of byproducts is highlighted. Concurrently, the rise and mechanisms of emerging EAOPs are predicted and analyzed. Finally, future research on EAOPs technologies should focus on technological coupling, development of new materials, reduction of energy consumption and cost, evaluation and minimization of toxicity, and exploration of green renewable energy sources for larger-scale applications in wastewater treatment pilot plants. In this way, these technologies can contribute to the sustainability of larger industrial wastewater treatment applications and make an important contribution to environmental protection and scientific and technological progress.

Decentralized approach toward organic pollutants removal using UV radiation in combination with H2O2-based electrochemical water technologies

The current literature lacks a comprehensive discussion on the trade-off between pollutant degradation/mineralization and treatment time costs in utilizing UV light in combination with H2O2-based electrochemical advanced oxidation processes (EAOPs). The present study sheds light on the benefits of using the photoelectro-Fenton (PEF) process with UVA or UVC for methylparaben (MetP) degradation in real drinking water. Although light boosts the photodegradation of refractory Fe(III) complexes and the photolysis of H2O2 (with UVC only), the energy-intensive nature of light-based treatments is acknowledged. To help tackle the high energy consumption issue, a novel approach was employed: partial application of UVA or UVC light after a predetermined electro-Fenton electrolysis time. The proposed treatment approach yielded satisfactory comparable results to those obtained from the application of PEF/UVA or PEF/UVC in terms of total organic carbon removal (ca. 100%), with notably lower energy consumption (ca. 50%). The study delves into the combined method's feasibility, analyzing pollutant degradation/mineralization process and overall energy consumption. The research identifies possible degradation routes based on intermediate detection and radical quenching experiments. Finally, toxicological assessments evaluate the toxicity levels of MetP and its intermediates. The findings of this study bring meaningful contributions to the fore and point to the highly promising potential of the proposed approach, in terms of sustainability and cost-effectiveness, when applied for decentralized water treatment.

Emerging micropollutants in aquatic ecosystems and nanotechnology-based removal alternatives: A review

There is a significant concern about the accessibility of uncontaminated and safe drinking water, a fundamental necessity for human beings. This concern is attributed to the toxic micropollutants from several emission sources, including industrial toxins, agricultural runoff, wastewater discharges, sewer overflows, landfills, algal blooms and microbiota. Emerging micropollutants (EMs) encompass a broad spectrum of compounds, including pharmaceutically active chemicals, personal care products, pesticides, industrial chemicals, steroid hormones, toxic nanomaterials, microplastics, heavy metals, and microorganisms. The pervasive and enduring nature of EMs has resulted in a detrimental impact on global urban water systems. Of late, these contaminants are receiving more attention due to their inherent potential to generate environmental toxicity and adverse health effects on humans and aquatic life. Although little progress has been made in discovering removal methodologies for EMs, a basic categorization procedure is required to identify and restrict the EMs to tackle the problem of these emerging contaminants. The present review paper provides a crude classification of EMs and their associated negative impact on aquatic life. Furthermore, it delves into various nanotechnology-based approaches as effective solutions to address the challenge of removing EMs from water, thereby ensuring potable drinking water. To conclude, this review paper addresses the challenges associated with the commercialization of nanomaterial, such as toxicity, high cost, inadequate government policies, and incompatibility with the present water purification system and recommends crucial directions for further research that should be pursued.

Chlorine-mediated electrochemical advanced oxidation process for ammonia removal: Mechanisms, characteristics and expectation

Chlorine-Mediated Electrochemical Advanced Oxidation (Cl-EAO) technology is a promising approach for ammonia removal from wastewater due to its numerous advantages, including small infrastructure, short processing time, easy operation, high security, and high nitrogen selectivity. This paper provides a review of the ammonia oxidation mechanisms, characteristics, and anticipated applications of Cl-EAO technology. The mechanisms of ammonia oxidation encompass breakpoint chlorination and chlorine radical oxidation, although the contributions of active chlorine, Cl, and ClO remain uncertain. This study critically examines the limitations of existing research and suggests that a combination of determining free radical concentration and simulating a kinetic model would help elucidate the contributions of active chlorine, Cl, and ClO to ammonia oxidation. Furthermore, this review comprehensively summarizes the characteristics of ammonia oxidation, including kinetic properties, influencing factors, products, and electrodes. The amalgamation of Cl-EAO technology with photocatalytic and concentration technologies has the potential to enhance ammonia oxidation efficiency. Future research should concentrate on clarifying the contributions of active chlorine, Cl, and ClO to ammonia oxidation, the production of chloramines and other byproducts, and the development of more efficient anodes for the Cl-EAO process. The main objective of this review is to enhance the understanding of the Cl-EAO process. The findings presented herein contribute to the advancement of Cl-EAO technology and provide a foundation for future studies in this field.

Characterization of UV/chlorine process for micropollutant abatement by probe compound-based kinetic models

Micropollutant (MP) abatement efficiencies are critical information for optimizing water treatment process for cost-effective operations. Nevertheless, due to the vast number of MPs in real water matrices, it is infeasible to measure their abatement efficiencies individually in practical applications. In this study, a probe compound-based kinetic model was developed for generalized prediction of MP abatement in various water matrices by the ultraviolet (UV)/chlorine process. The results show that by measuring the depletion of three probe compounds (ibuprofen, primidone, and dimetridazole) spiked in the water matrix, the exposures of main reactive chlorine species (RCS including chlorine radicals (Cl•), dichloride radicals (Cl₂^-•) and chlorine oxide radicals (ClO•)) and hydroxyl radicals (•OH) during the UV/chlorine process could be calculated using the model. Based on the determined exposures, the abatement efficiencies of various MPs in different water matrices (e.g., surface water, groundwater, and wastewater) could generally be predicted with acceptable accuracy by the model without prior water-specific calibration. In addition, the relative contribution of UV photolysis and oxidation with active chlorine, RCS, and •OH to MP abatement could be quantitatively simulated using the model to clarify the abatement mechanism of MPs during the UV/chlorine process. The probe-based kinetic model can thus offer a useful tool to guide practical water and wastewater treatment for MP abatement and to explore the mechanism of UV/chlorine process.

Insight into micropollutant abatement during ultraviolet light-emitting diode combined electrochemical process: Reaction mechanism, contributions of reactive species and degradation routes

Electrochemical process coupling with ultraviolet light-emitting diode for micropollutant abatement was evaluated in the treatment of wastewater containing Cl^-. Four representative micropollutants, atrazine, primidone, ibuprofen and carbamazepine, were selected as target compounds. The impacts of operating conditions and water matrix on micropollutant degradation were investigated. Fluorescence excitation-emission matrix spectroscopy spectra and high performance size exclusion chromatography were employed to characterize the transformation of effluent organic matter in treatment. The degradation efficiencies of atrazine, primidone, ibuprofen and carbamazepine are 83.6 %, 80.6 %, 68.7 % and 99.8 % after 15 min treatment, respectively. The increment of current, Cl^- concentration and ultraviolet irradiance promote the micropollutant degradation. However, the presence of bicarbonate and humic acid inhibit micropollutant degradation. The mechanism of micropollutant abatement was elaborated based on reactive species contributions, density functional theory calculation and degradation routes. Free radicals (HO^•, Cl^•, ClO^• and Cl₂^•-) could be generated by chlorine photolysis and subsequent propagation reactions. The concentrations of HO^• and Cl^• are 1.14 × 10^-13 M and 2.0 × 10^-14 M in optimal condition, respectively, and the total contributions of HO^• and Cl^• for the degradation of atrazine, primidone, ibuprofen and carbamazepine are 24 %, 48 %, 70 % and 43 %, respectively. The degradation routes of four micropollutants are elucidated based on intermediate identification, Fukui function and frontier orbital theory. Micropollutants can be effectively degraded in actual wastewater effluent, and the small molecule compound proportion increases during effluent organic matter evolution. Compared with photolysis and electrolysis, the coupling of the two processes has potential for energy saving in micropollutant degradation, which shed light on the prospects of ultraviolet light-emitting diode coupling with electrochemical process for effluent treatment.

Removal of antibiotic resistant bacteria and plasmid-encoded antibiotic resistance genes in water by ozonation and electro-peroxone process

The electro-peroxone (EP) process is an electricity-based oxidation process enabled by electrochemically generating hydrogen peroxide (H₂O₂) from cathodic oxygen (O₂) reduction during ozonation. In this study, the removal of antibiotic resistant bacteria (ARB) and plasmid-encoded antibiotic resistance genes (ARGs) during groundwater treatment by ozonation alone and the EP process was compared. Owing to the H₂O₂-promoted ozone (O₃) conversion to hydroxyl radicals (•OH), higher •OH exposures, but lower O₃ exposures were obtained during the EP process than ozonation alone. This opposite change of O₃ and •OH exposures decreases the efficiency of ARB inactivation and ARG degradation moderately during the EP process compared with ozonation alone. These results suggest that regarding ARB inactivation and ARG degradation, the reduction of O₃ exposures may not be fully counterbalanced by the rise of •OH exposures when changing ozonation to the EP process. However, due to the rise of •OH exposure, plasmid DNA was more effectively cleaved to shorter fragments during the EP process than ozonation alone, which may decrease the risks of natural transformation of ARGs. These findings highlight that the influence of the EP process on ARB and ARG inactivation needs to be considered when implementing this process in water treatment.

Heterogeneous photocatalytic activation of electrogenerated chlorine for the production of reactive oxygen and chlorine species: A new approach for Bisphenol A degradation in saline wastewater

UV-E-chlorination/hematite nanoparticles (UV/E-Cl/HNs) as a heterogeneous photocatalytic activation of electrogenerated chlorine was assessed for the degradation of bisphenol A (BPA) as a new approach based on the generation of reactive chlorine and oxygen species. The prepared sample was characterized using multiple techniques, such as XRD, FTIR, FESEM, EDS, and BET-BJH. An excellent decontamination efficiency of 99.4% was achieved within 40 min of electrolysis under optimum conditions (pH of 5, HNs dosage 100 mg/L, current density of 20 mA/cm², and NaCl concentration of 50 mM). The HOCl content was reduced more swiftly in the presence of ultraviolet (UV) irradiation and hematite, resulting in the production of oxidative radicals (i.e., ^•OH, Cl^•, and Cl₂^•-). The scavenging experiments also verified the vital role of these radicals in oxidative treatment. The UV/E-Cl/HNs process is readily supplied with hydroxyl radicals through several mechanisms. Bicarbonate ions showed a noticeable inhibitory impact, whereas nitrate and sulfate anions only slightly affected BPA degradation. The HNs were a recoverable and stable catalyst for six cycles. Furthermore, the ECOSAR program predicted that the UV/E-Cl/HNs can be labeled as an environmental-friendly process. Eventually, reasonable degradation pathways were proposed based on the identified by-products through experimental and theoretical approaches.

Acetaminophen degradation in aqueous solution by the UV-LED-EC/Cl2 process

In this study, electrochemically generated free chlorine (EC/Cl2) was activated by UV irradiation with a light emitting diode (LED) lamp at 275 nm to degrade acetaminophen (AAP, 2 μM) in aqueous solution. The potential at a RuO2-IrO2/Ti plate anode was set at 1.5 V vs. the Ag/AgCl electrode. Chlorine was in situ generated in the presence of Cl at the anode and then it was transformed into various active species such as OH and reactive chlorine species (RCS) under UV-LED irradiation. The degradation of AAP was investigated using batch tests, evaluating the influence of different experimental conditions such as NaCl concentration, phosphate buffer saline concentration, irradiation time and solution pH, keeping constant the UV-LED power and temperature. Results show that AAP could be completely degraded by the hybrid process with a high mineralization ratio (73%), and the degradation process followed a pseudo-first-order kinetics. The value of the Electric Energy per Order (EEO) = 1.272 kWh m3 order?, which is lower than the energy consumption of some other UV-based processes for AAP degradation. Adding 1 mM HCO3 ions slightly decreased the rate of AAP degradation. Luminescent bacteria experiment revealed that the acute toxicity of the reacted solution could be greatly reduced and the ecological risk was effectively abated. The scavenging assay shows that RCS plays a key role in the AAP degradation. The intermediate products were identified, and possible degradation routes were proposed. The system can advantageously replace conventional UV mercury lamp based ones in the degradation of microorganic pollutants.

Degradation of odorous 2,4,6-trichloroanisole in chlorinated water by UV-LED/chlorination: kinetics and influence factors

2,4,6-Trichloroanisole (2,4,6-TCA) has aroused a special concern for their odor problem and potential threats. In this study, the degradation of 2,4,6-TCA by UV/chlorination with different UV sources was compared, including low-pressure mercury lamp (LPUV, 254 nm) and ultraviolet light-emitting diode (UV-LED, 275 and 285 nm). The maximum removal of 2,4,6-TCA can be achieved by 275-nm UV-LED/chlorination in neutral and alkaline conditions which was 80.0%. The reaction, kinetics, and water matrix parameters on 2,4,6-TCA degradation were also evaluated. During UV-LED (275 nm)/chlorination, 2,4,6-TCA degradation was mainly caused by direct UV photolysis and indirect hydroxyl radical (HO·) oxidation, while reactive chlorine radicals (RCSs) had a negligible contribution. The second-order rate constant between HO· and 2,4,6-TCA was determined as 3.1 × 10⁹ M^-1 s^-1. Increasing initial chlorine dosage and decreasing 2,4,6-TCA concentration or pH value significantly promoted 2,4,6-TCA degradation during UV/chlorination process. The presence of natural organic matter (NOM) and bicarbonate (HCO₃^-) can inhibit 2,4,6-TCA degradation, while chloride ion (Cl^-) had a negligible effect. The kinetic model for 2,4,6-TCA degradation was established and validated, and the degradation pathways were proposed based on the identified intermediates. Furthermore, UV-LED (275 nm)/chlorination also exhibited a promising effect on 2,4,6-TCA removal in real water, which can be used to control 2,4,6-TCA pollution and odor problems.

A detailed review on advanced oxidation process in treatment of wastewater: Mechanism, challenges and future outlook

The presence of several contaminants in waterbodies raises global pollution and creates major risks to mankind, wildlife, as well as other living organisms. Development of an effective, feasible, cost-effective and eco-friendly approach for treating wastewater that is discharged from various industries is important for bringing down the deposition of contaminants into environment. Advanced oxidation process is an efficient technique for treating wastewater owing to its advantages such as high oxidation efficacy and does not produce any secondary pollutants. Advanced oxidation process can be performed through various methods such as ozone, Fenton, electrochemical, photolysis, sonolysis, etc. These methods have been widely utilized for degradation of emerging pollutants that cannot be destroyed using conventional approaches. This review focuses on wastewater treatment using advanced oxidation process. A brief discussion on mechanism involved is provided. In addition, various types of advanced oxidation process and their mechanism are explained in detail. Challenges faced during wastewater treatment process using oxidation, electrochemical, Fenton, photocatalysis and sonolysis are discussed elaborately. Advanced oxidation process can be viewed as potential approach for treating wastewater with certain modifications and solving challenges.

Efficient Removal of Ammonia Nitrogen by an Electrochemical Process for Spent Caustic Wastewater Treatment

Spent caustic wastewater produced in a soda plant has a high concentration of ammonia nitrogen (NH4+-N). As excessive NH4+-N discharging into water bodies would cause eutrophication as well as destruction to the ecology balance, developing an efficient technology for NH4+-N removal from the spent caustic wastewater is imperative in the current society. In this study, an electrochemical process with graphene electrodes was designed for the NH4+-N removal in the spent caustic wastewater. The removal efficiency of the NH4+-N during the electrochemical process could reach 98.7% at 4 A in a short treatment time (within 120 s) with an acceptable energy consumption (6.1 kWh/m3-order). NO3− and NO2− were not detected during the electrochemical process. An insignificant amount of NH2Cl, NHCl2, and NCl3 produced in the treatment suggested that little of the NH4+-N reacted with chlorine, that is, chlorination played a negligible role in the NH4+-N removal. By electron equilibrium and nitrogen conversion analysis, we think that NH4+-N was primarily converted to NH2(ads) on the surface of a graphene electrode by one-electron transfer during the direct oxidation of the electrochemical process. Due to the high calcium ion (Ca2+) in the spent caustic wastewater, the electrode scale significantly increased to 1.4 g after treatment of 240 s at 4 A. By X-ray diffraction (XRD) analysis, the composition of the electrode scale is portlandite Ca(OH)2. Although the electrode scale was obvious during the electrochemical treatment, it could be alleviated by alternating the electrode polarity. As a result, the life and efficiency of the graphene electrode for NH4+-N removal could remain stable for a long time. These results suggest that the electrochemical process with a graphene electrode may provide a competitive technology for NH4+-N removal in spent caustic wastewater treatment.

An efficient Fe2+ assisted UV/electrogenerated-chlorine process for carbamazepine degradation: The role of Fe(IV)

To improve the performance and solve the restrictions of UV/chlorine process (e.g., the narrow pH application range and high disinfection by-products (DBPs) formation), a Fe²⁺ assisted advanced oxidation process with electrochemically generated chlorine (UV/E-Cl/Fe²⁺) was proposed for carbamazepine (CBZ) degradation, which eliminated CBZ (5 mg/L) within 4 min under the optimal conditions. Compared with UV/electro-generated chlorine (UV/E-Cl) and anodic oxidation-chlorination/Fe²⁺ (AO-Cl/Fe²⁺) processes, the apparent first-order kinetics constant in UV/E-Cl/Fe²⁺ increased by 2.56 and 3.18 times respectively, and the energy consumption was lower (1.15 kWh/m³-log). Simultaneously, the pH application range could be expanded to 9, and DBPs formed in this process were 17.1% less than those in UV/E-Cl. Through quenching tests, electron paramagnetic resonance (EPR) experiments, measurement of ^•OH concentration, quantification of methyl phenyl sulfoxide (PMSO) and benzosulfone (PMSO₂) and processes comparison, possible CBZ degradation pathways and mechanism of UV/E-Cl/Fe²⁺ were proposed, in which Fe(IV) played the dominant role in the early stage, while the production of radicals (i.e., ^•OH and Cl^•) was enhanced with the increase of chlorine generation, accelerating the CBZ removal. Furthermore, this process demonstrated wide application prospect in treating various contaminants and real wastewaters. In conclusion, this study offers an effective and energy-efficient method for organic pollutants degradation.

The efficacy of the VUV/O3 process run in a continuous-flow fluidized bed reactor for simultaneous elimination of favipiravir and bacteria in aqueous matrices

The efficacy of the Vacuum UV/Ozonation (VUV/O₃) process was evaluated for the degradation of favipiravir (FAV). It was found that coupling O₃ and VUV resulted in a considerable synergistic catalytic effect on FAV removal. The VUV/O₃ process performed better in moderately alkaline conditions than in acidic ones; complete FAV degradation and 99.4% TOC removal were achieved within 10 and 60 min, respectively. HO^• played the dominant role in FAV degradation, with a second-order reaction rate constant with HO^• at 1.05 × 10¹⁰ M^-1 s^-1. The VUV/O₃ process could effectively treat tap water spiked with FAV. Efficient FAV and TOC removal, as well as total bacterial inactivation, was attained when treating municipal secondary effluent by the VUV/O₃ process. Finally, the VUV/O₃ process was operated in a continuous-flow mode in a fluidized-bed (FBR) reactor for treating FAV-spiked tap water. Complete degradation and 75.1% mineralization of 10 mg/L FAV were obtained at a hydraulic retention time of 1 and 8 min, respectively. The findings clearly suggest that the VUV/O₃ process operated in a continuous-flow FBR is a promising, efficient technology for the removal of novel and emerging contaminants, such as the antiviral FAV.

A novel electrocatalytic system with high reactive chlorine species utilization capacity to degrade tetracycline in marine aquaculture wastewater

The problems of high salinity and coexistence of antibiotics in mariculture wastewater pose a great challenge to the traditional wastewater treatment technology. Herein, an electrocatalytic system based on cathodes to sustain reactive chlorine species (RCS) in a high chlorine environment was proposed. The results show that the content of RCS is affected by cathodes. The electrocatalytic system with FeNi/NF as cathode has the largest RCS retention capacity when compared with other cathode systems (carbon felt, nickel foam, copper foam, stainless steel, and nickel-iron foam). This is related to FeNi/NF's higher hydrogen production activity, which inhibits the reduction reaction of RCS. Furthermore, the degradation of tetracycline by the proposed FeNi/NF system maintained long-term effective performance across 20 cycles. Thus, the application of high chlorine resistance electrocatalysis system provides a possibility for practical electrocatalysis treatment of mariculture wastewater.

Energy-efficient removal of carbamazepine in solution by electrocoagulation-electrofenton using a novel P-rGO cathode

In this study, carbamazepine (CBZ) decay in solution has been studied by coupling electrocoagulation with electro-Fenton (EC-EF) with a novel P-rGO/carbon felt (CF) cathode, aiming to accelerate the in-situ generation of •OH, instead of adding Fe²⁺ and H₂O₂. Firstly, the fabricated P-rGO and its derived cathode were characterized by XRD, SEM, AFM, XPS and electrochemical test (EIS, CV and LSV). Secondly, it was confirmed that the performance in removal efficiency and electric energy consumption (EEC) by EC-EF (k_obs=0.124 min^-1, EEC=43.98 kWh/kg CBZ) was better than EF (k_obs=0.069 min^-1, EEC=61.04 kWh/kg CBZ). Then, P-rGO/CF (k_obs=0.248 min^-1, EEC=29.47 kWh/kg CBZ, CE=61.04%) showed the best performance in EC-EF, among all studied heteroatom-doped graphene/CF. This superior performance may be associated with its largest layer spacing and richest C=C, which can promote the electron transfer rate and conductivity of the cathode. Thus, more H₂O₂ and •OH could be produced to degrade CBZ, and almost 100% CBZ was removed with k_obs being 0.337 min^-1 and the EEC was only 24.18 kWh/kg CBZ, under the optimal conditions (P-rGO loading was 6.0 mg/cm², the current density was 10.0 mA/cm², the gap between electrode was 2.0 cm). Additionally, no matter the influent is acidic, neutral or alkaline, no additional pH adjustment is required for the effluent of EC-EF. At last, an inconsecutive empirical kinetic model was firstly established to predict the effect of operating parameters on CBZ removal.

Kinetic and mechanistic investigation of geosmin and 2-methylisoborneol degradation using UV-assisted photoelectrochemical

The taste and odor (T&O) problem represented by 2-methylisoborneol (2-MIB) and geosmin (GSM) in water is the multiple undesirable substances in the drinking water and the aquatic industry. In this study, the UV-assisted photoelectrochemical, a prospective advanced oxidation process (AOP), was evaluated for the degradation of 2-MIB and GSM. In contrast to UV photochemical and electrochemical, the degradation ratio of GSM (2-MIB) increase to 96% (95%) in 25 min. The removal ratio and rate depended on reaction time, electrolyte concentration, current density, and water quality parameters (e.g. pH, HCO₃^-, natural organic matter, and tap water). Among these parameters, a high concentration of electrolyte and acidic solutions could accelerate the rate and increase the ratio, while alkaline conditions and the impurity content had negative effects. Furthermore, the significant role of various reactive species (e.g. HO∙, Cl, ClO, etc) were highlighted by scavenging experiments. Complex free radicals exist was further verified by electron paramagnetic resonance spectroscopy (EPR) experiments. The intermediates were identified and the possible degradation pathways during the UV-assisted photoelectrochemical reactions of both compounds were proposed. Overall, the UV-assisted photoelectrochemical is beneficial to the removal of GSM and 2-MIB in water.

Airborne pathogenic microorganisms and air cleaning technology development: A review

Transmission of pathogens through air is a critical pathway for the spread of airborne diseases, as airborne pathogenic microorganisms cause several harmful infections. This review summarizes the occurrence, transmission, and adverse impacts of airborne pathogenic microorganisms that spread over large distances via bioaerosols. Air cleaning technologies have demonstrated great potential to prevent and reduce the spread of airborne diseases. The recent advances in air cleaning technologies are summarized on the basis of their advantages, disadvantages, and adverse health effects with regard to the inactivation mechanisms. The application scope and energy consumption of different technologies are compared, and the characteristics of air cleaners in the market are discussed. The development of high-efficiency, low-cost, dynamic air cleaning technology is identified as the leading research direction of air cleaning. Furthermore, future research perspectives are discussed and further development of current air cleaning technologies is proposed.

Rational Fabrication of Multiple Dimensional Assemblies from Tryptophan-Based Racemate

Fabricating structural complex assemblies from simple amino acid-based derivatives is attracting great research interests due to their easy accessibility and preparation. However, the morphological regulation of racemates (an equimolar mixture of enantiomers) were largely overlooked. In this work, through rational modulation of kinetic and thermodynamic parameters, we achieved multiple dimensional architectures employing tryptophan-based racemate (RPWM). Upon assembling, 1D bundled nanofibers, 2D lamellar nanostructure and 3D urchin-like microflowers could be obtained depending on the solvents used. The corresponding morphology evolutions were successfully illustrated by changing the enantiomeric excess (ee) value. Moreover, for RPWM, uniform 0D nanospheres were formed in H 2 O under 4 ℃, which could spontaneously convert into lamella under ambient temperature. Taking advantages of its temperature-responsive phase change behavior, RPWM assemblies exhibited excellent removal efficiency for organic dye RhB, and could be reused for several consecutive cycles without significant changes in its removal performance. Taken together, it's rational to envision that the engineering of racemates assembly pathways can greatly increase the robustness in a wide variety of supramolecular materials and further lead to their blooming versatile applications.

FeS2/carbon felt as an efficient electro-Fenton cathode for carbamazepine degradation and detoxification: In-depth discussion of reaction contribution and empirical kinetic model

Carbamazepine (CBZ) decay by electro-Fenton (EF) oxidation using a novel FeS₂/carbon felt (CF) cathode, instead of a soluble iron salt, was studied with the aim to accelerate the reaction between H₂O₂ and ferrous ions, which helps to produce more hydroxyl radicals (^•OH) and eliminate iron sludge. First, fabricated FeS₂ and its derived cathode were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, and X-ray photoelectron spectroscopy. Anodes were then screened, with DSA (Ti/IrO₂-RuO₂) showing the best performance under EF oxidation regarding CBZ degradation and electrochemical characterization. Several operating parameters of this EF process, such as FeS₂ loading, current density, gap between electrodes (GBE), initial [CBZ], and electrolyte type, were also investigated. Accordingly, a nonconsecutive empirical kinetic model was established to predict changes in CBZ concentration under the given operational parameters. The contribution of different oxidation types to the EF process was calculated using kinetic analysis and quenching experiments to verify the role of the FeS₂-modified cathode. The reaction contributions of anodic oxidation (AO), H₂O₂ electrolysis (EP), and EF oxidation to CBZ removal were 12.81%, 7.41%, and 79.77%, respectively. The ^•OH exposure of EP and EF oxidation was calculated, confirming that ^•OH exposure was approximately 22.45-fold higher using FeS₂-modified CF. Finally, the 19 intermediates formed by CBZ degradation were identified by ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry. Accordingly, four CBZ degradation pathways were proposed. ECOSAR software was used to assess the ecotoxicity of intermediates toward fish, daphnia, and green algae, showing that this novel EF oxidation process showed good toxicity reduction performance. A prolonged EF retention time was proposed to be necessary to obtain clean and safe water, even if the targeted compound was removed at an earlier time.

Mitigation of emerging pollutants and pathogens in decentralized wastewater treatment processes: A review

Emerging pollutants (such as micropollutants, microplastics) and pathogens present in wastewater are of rising concern because their release can affect the natural environment and drinking water resources. In this decade, with increasing numbers of small-scale decentralized wastewater systems globally, the status of emerging pollutant and pathogen mitigation in the decentralized wastewater treatment processes has received more attention. This state-of-the-art review aims to discuss the mitigation efficiencies and mechanisms of micropollutants, microplastics, and pathogens in single-stage and hybrid decentralized wastewater treatment processes. The reviewed results revealed that hybrid wastewater treatment facilities could display better performance compared to stand-alone facilities. This is because the multiple treatment steps could offer various microenvironments, allowing incorporating several mitigation mechanisms (such as sorption, degradation, filtration, etc.) to remove complicated emerging pollutants and pathogens. The factors (such as system operation conditions, environmental conditions, wastewater matrix) influencing the removals of emerging pollutants from wastewater in these systems have been further identified. Nevertheless, it was found that very limited research work focused on synergised or conflicted effects of operation conditions on various emerging pollutants naturally present in the wastewater. Meanwhile, effective, reliable, and rapid analysis of the emerging pollutants and pathogens in the complicated wastewater matrix is still a major challenge.

On the performance of distinct electrochemical and solar-based advanced oxidation processes to mineralize the insecticide imidacloprid

Water contamination by contaminants of emerging concern is one of the main challenges to be solved by our desired sustainable society. In the same time, different technologies for water treatment are becoming enough mature to be implemented. In this work, two different advanced oxidation processes (AOP) were investigated: i) electrochemical processes (electrochemical, photoassisted electrochemical, electro Fered-Fenton, and photo-electro Fered-Fenton - PEF-Fered) using a BDD and DSA® electrodes under UVA and UVC irradiation (9 W) and ii) solar-based AOP using four distinct oxidants (HOCl, H₂O₂, S₂O₈^2-, HSO₅^-) in the presence or absence of Fe²⁺ ions to oxidize and mineralize imidacloprid (IMD: 50 mg L^-1) containing solutions. The PEF-Fered (1.0 mM Fe²⁺ and 50 mg L^-1 h^-1 H₂O₂) under UVA or UVC irradiation and HOCl/UVC (NaCl 17 mM) processes using a BDD and DSA® electrodes (10 mA cm ^-2), respectively, performed equally well to completely oxidize and mineralize (∼90%) IMD at the expense of only ∼0.3 kWh g^-1. Low amounts and highly oxidized byproducts identified through liquid chromatography tandem mass spectrometry were observed for the HOCl/UVC process using a DSA® electrode. Concerning the solar-based AOP, all assessed oxidants (4 mM h^-1) successfully oxidized IMD within 3 h of treatment, whereas only H₂O₂ and HOCl led to significant (∼60%) TOC abatement after 6 h treatment. The use of Fe²⁺ (0.5 or 1.0 mM) had no significant improvement in the oxidation and mineralization of IMD.