Occurrence, fate and removal of microplastics as heavy metal vector in natural wastewater treatment wetland system

An in-depth analysis of microbial response to exposure to high concentrations of microplastics in anaerobic wastewater fermentation

The impact of microplastics (MPs) in anaerobic wastewater treatment on microbial metabolism is significant. Anaerobic granular sludge (AS) and biofilm (BF) are two common ways, and their responses to microplastics will have a direct impact on their application potential. This study investigated the microbial reactions of AS and BF to three types of MPs: polyethylene (PE), polyvinyl chloride (PVC), and a mixture of both (MIX). Results exhibited that MPs reduced methane output by 44.65 %, 55.89 %, and 53.18 %, elevated short-chain fatty acid (SCFA) levels by 95.93 %, 124.49 %, and 110.78 %, and lowered chemical oxygen demand (COD) removal by 28.77 %, 36.78 %, and 33.99 % for PE-MP, PVC-MP, and MIX-MP, respectively, with PVC-MP showing the greatest inhibition. Meanwhile, microplastics also facilitated the relative production of reactive oxygen species (ROS, 40.29 %-96.99 %), lactate dehydrogenase (LDH, 20.01 %-75.02 %), and adenosine triphosphate (ATP, 26.64 %-43.80 %), while reducing cytochrome c (cyt c, 23.60 %-49.02 %) and extracellular polymeric substances (EPS, 17.44 %-26.58 %). AS and BF displayed distinct enzymatic activities under MPs exposure. Correspondingly, 16S-rRNA sequencing indicated that AS was mainly involved in acetate generation by Firmicutes, while BF performed polysaccharide degradation by Bacteroidota. Metatranscriptomic analysis showed AS to be rich in acetogens (Bacillus, Syntrophobacter) and methanogens (Methanothrix, Methanobacterium), while BF contained more fermentation bacteria (Mesotoga, Lentimicrobium) and electroactive microorganisms (Clostridium, Desulfuromonas) under MIX-MP. Moreover, BF exhibited higher glycolysis gene expression, whereas AS was more active in methane metabolism, primarily through the acetoclastic methanogenic pathway's direct acetate conversion. This study provides new insights into understanding the microbial response produced by microplastics during anaerobic wastewater digestion.

Impact of microplastics on strength parameters of clayey, Sandy, silty soil: A comparative assessment

The comparative assessment of a variety of microplastic contamination on various soil types hasn't been extensively explored in existing literature. The present study focuses on the comparative analysis of the impact of environmentally relevant concentrations of LDPE, HDPE, and PVC microplastic contamination (2 %, 4 %, and 6 %) on index properties and strength parameters of sandy, silty and clayey soil types at varying observation days 5,10,15,20,25, and 30 days. Extensive experimental investigations are carried out to understand the effect of contamination on moisture content, specific gravity, liquid limit, plastic limit, plasticity index, optimum moisture content, maximum dry density, and shear strength parameters of the respective soil type. It is observed that the depletion in Atterberg's limits is found more in the case of clayey soil as compared to silty soil because clayey soils consist of large specific surface areas leading to van der Waals force of attraction being the predominant force between particles, compared with silty soil which is affected by microplastic addition leading to decrease in net attractive forces. In the case of clayey soil maximum depletion of liquid limit up to 168 %, plastic limit up to 33 %, plasticity index (136 %), and optimum moisture content (9.04 %) is observed for PVC microplastic. The deduction in maximum dry density values is observed more for sandy soil (0.59 g/cc) followed by silty soil (0.21 g/cc) and clayey soil (0.12 g/cc). The maximum depletion of moisture content(delta-8 %), shear strength (delta-0.89 kg/cm2), and maximum dry density (delta-0.44 g/cc) is observed in the case of sandy soil for PVC and LDPE microplastic contamination. Significant depletion in optimum moisture content is observed in the case of clayey soil (9.57 %) compared to sandy (5.62 %) and silty soil (5.3 %). An increase in cohesion is observed for sandy soil (0.09 kg/cm2) and a decrease for clayey (0.19 kg/cm2) and silty soil (0.19 kg/cm2). The angle of internal friction is reduced in the case of clayey soil (∆-14.380) followed by silty soil (∆-11.230) and sandy soil (∆-11.020). For silty soil maximum depletion of specific gravity(delta-1.06) and cohesion (0.192 kg/cm2) is observed for LDPE and HDPE microplastic. The sandy soil type is most affected due to microplastic contamination irrespective of the type of microplastic contamination followed by clayey soil and the silty soil type is least affected. The maximum overall shear strength is reduced due to microplastic contamination in all the soil types.

Interactions between microplastics and heavy metals in leachate: Implications for landfill stabilization process

The emission of microplastics and heavy metals in landfills has attracted widespread attention for its stabilization process. Microplastics have become carriers of heavy metals due to their adsorption properties, affecting their environmental behavior. However, the effects of landfill stabilization on the interaction between microplastics and heavy metals in leachate are ambiguous. This work explored the abundance characteristics of microplastics and heavy metals in leachate from 10 landfills in Beijing. Overall, the average abundance of microplastics was 196.3 items/L, dominated by small particle size (20-50 µm) and film microplastics. The levels of Cr and As were much higher than other heavy metals. The average abundance of microplastics and polymer types tended to decrease as the landfill stabilization proceeded, and the surface composition of microplastics became more complex. Statistical analysis revealed that the correlations between microplastics and heavy metals in the leachate of landfill stabilization presented significant parabolic characteristics, and Cr and As were more susceptible to landfill stabilization with significant positive correlation with a wide range of microplastics such as 20-30 µm. These results were intended to provide a scientific basis for the treatment and disposal of waste leachate and the synergistic prevention and control of new and traditional pollutants.

Photophoretic MoS2-Fe2O3 Piranha Micromotors for Collective Dynamic Microplastics Removal

Microplastics are highly persistent emerging pollutants that are widely distributed in the environment. We report the use of MoS2@Fe2O3 core-shell micromotors prepared by a hydrothermal approach to explore the degradation of plastic microparticles. Polystyrene was chosen as the model plastic due to its wide distribution and resistance to degradation using current approaches. Micromotors show photophoretic-based motion at speeds of up to 6 mm s-1 and schooling behavior under full solar light spectra irradiation without the need for fuel or surfactants. During this impressive collective behavior, reactive oxygen species (ROS) are generated because of the semiconducting nature of the MoS2. Degradation of polystyrene beads is observed after 4 h irradiation because of the synergistic effect of ROS production and localized heat generation. The MoS2@Fe2O3 micromotors possess magnetic properties, which allow further cleaning and removal to be carried out after irradiation through magnetic pulling. The new micromotors hold considerable promise for full-scale treatment applications, only limited by our imagination.

Electron beam synergetic removal of microplastics and hexavalent chromium: Synergetic removal process and mechanism

Microplastics are ubiquitous in the environment and aged microplastics are highly susceptible to absorbing pollutants from the environment. In this study, electron beam was innovatively used to treat PVC composite Cr(VI) pollutants (Composite contaminant formed by polyvinyl chloride microplastics with the heavy metal hexavalent chromium). Experiments showed that electron beam was able to achieve synergistic removal of PVC composite Cr(VI) pollutants compared to degrading the pollutants alone. During the electron beam removal of PVC composite Cr(VI) pollutants, the reduction efficiency of Cr(VI) increased from 57% to 92%, Cl- concentration increased from 3.52 to 12.41 mg L-1, and TOC concentration increased from 16.72 to 26.60 mg L-1. The research confirmed that electron beam can effectively promote the aging degradation of PVC, alter the physicochemical properties of microplastics, and generate oxygen-containing functional groups on the surface of microplastics. Aged microplastics enhanced the adsorption capacity for Cr(VI) through electrostatic and chelation interactions, and the adsorption process followed second-order kinetics and the Freundlich model. Theoretical calculations and experiments demonstrated that PVC consumed oxidizing free radical through dechlorination and decarboxylation processes, generating inorganic ions and small organic molecules. These inorganic ions and small organic molecules further reacted with oxidizing free radical to produce reducing free radicals, facilitating the reduction of Cr(VI). Cr(VI) continuously consumed the educing free radicals to transform into Cr (Ⅲ), enhancing the system oxidative atmosphere and promoting the oxidation degradation of PVC. This study investigated the formation and synergistic removal processes of PVC composite pollutants, offering new insights for controlling microplastics composite pollution.

Microplastic pollution differences in freshwater river according to stream order: Insights from spatial distribution, annual load, and ecological assessment

Microplastic (MP) pollution has become a pressing concern in global freshwater ecosystems because rivers serve as essential channels for the transport of terrestrial debris to the ocean. The current researches mostly focus on the large catchments, but the impact on the small catchments remains underexplored. In this study, we employed Strahler's stream order classification to delineate the catchment structure of the Beijiang River in South China. The distribution pattern of MP contamination and the factors influencing the distribution pattern, were assessed across the streams at different orders. We found that the Beijiang River was moderately polluted compare to other rivers in China, with an average MP abundance of 2.15 ± 1.65 items/L. MP abundance ranged from 3.17 to 1.45 items/L in the streams at different orders, and significantly decreased with increasing stream order (R2 = 0.93). This highlights the key role of small rivers as the channels for the transport of MPs from watersheds to main streams. The high abundance of PP and PE fibers, the high correlation between the stream order and the resin proportion (R2 = 0.89), and the significant correlation between MP abundance and proximity to urban centers (P = 0.02), indicated that MP pollution across the streams at different orders was predominantly influenced by anthropogenic activities, rather than natural environmental factors. By integrating MP data with hydrographic information, the annual MP loads for the streams at Orders 1 to Order 5 were estimated to be 4.63, 39.38, 204.63, 503.06, and 1137.88 tons/yr, respectively. Additionally, an ecological risk assessment indicates that MP pollution led to a low risk in the Beijiang River. Our findings deepen the understanding of MP pollution within freshwater river networks, and emphasize the crucial role of tributary systems in transporting MPs to main river channels.

Toxic Metal Element Concentration in 31 Food Fishes from River Ganga: Risk Assessment on Human Consumption

Consumption of toxic metal contaminated fish is a significant risk to human health. The Ganga river is one of the vital river systems in India, and it nurtures a rich biodiversity of flora and fauna. In the present study, screening of potential toxic metal elements (Cd, Cr, Mn, Cu, Pb, Ni, Zn, and As) was undertaken in 31 food fishes, especially the small indigenous fishes (SIFs) from the lower stretch of river Ganga by inductively coupled plasma mass spectrometry (ICP-MS). The concentration of toxic metal elements varied among different fish species. Among the toxic metal elements studied, Cr, Zn, and As were found to be dominant in Eleotris fusca; Cd, Ni, and Pb were highest in Securicula gora; Cu was highest in Cabdio morar; and Mn was highest in Coilia dussumieri. The average pollution load index values (APLI) for all the fishes analyzed were less than one except for Eleotris fusca, which indicated no serious toxic metal element pollution load. The estimated daily intake values (EDI) for the toxic metal elements were found to be within the permissible maximum tolerable daily intake (MTDI). Among the fishes studied, only a few species showed hazard index (HI) greater than one, indicating non-carcinogenic health risks. Similarly, the target carcinogenic values (TCR) for most of the toxic metal elements were below the permissible limit (10-4) in the fishes that assures minimal cancer risk. This study provides a comprehensive data on the composition of potential toxic metal elements of 31 food fishes from the lower stretch of the river Ganga, the first of its kind, and suggests the necessity of periodic monitoring of these in the aquatic ecosystem.

The fate of plastic wraps in constructed wetland: Surface structure and microbial community

The high use of plastic wraps leads to significant environmental pollution. In this study, the surface structure and microbial community evolution of commercially available plastic wraps [polyethylene (PE), polyvinyl chloride (PVC), polyvinylidene chloride (PVDC), and polylactic acid (PLA)] in constructed wetlands (CWs) were investigated. The results indicated that all plastic wraps gradually decreased in molecular weight, crystallinity, melting, and crystallization temperatures, whereas a gradual increase was observed in the surface roughness, polymer dispersity index (PDI), carbonyl index (CI) and Shannon index of microorganisms colonizing the CWs. The aging rate of the plastic wrap was in the order: PLA > PVC > PE > PVDC, at the same site in the CWs, and it was in the order: soil surface > plant roots > subsoil, for the same plastic wrap. The diversity of microorganisms colonizing the same plastic wrap was in the order: plant roots > subsoil > soil surface. The Shannon indices of microorganisms on plastic wraps were lower than those in the soil, indicating that the diversity of microorganisms colonizing plastic wraps is limited. Additionally, the microbial community structure on the plastic surface was co-differentiated by the plastic type, placement position in the CWs, and aging time. Significantly different microbial community structures were found on the PVC and PVDC wrap surfaces, revealing that the chlorine in plastics limits microbial diversity. Unclassified members of Rhizobiaceae and Pseudomonadaceae were the dominant genera on the surface of the plastic wraps, suggesting that they may be the microorganisms involved in plastic degradation processes. The study provides valuable perspectives to facilitate a comprehensive understanding of the migration, fate, and environmental risks associated with microplastics (MPs) in wetlands.

The competition of heavy metals between hyporheic sediments and microplastics of driving factors in the Beiluo River Basin

Both sediments and microplastics (MPs) are medias of heavy metals (HMs) in river ecosystems. This study investigated HMs (Mn, Cr, V, As, Cu, Co, Cd, Pb, and Ni) concentration and driving factors for competitive enrichment between hyporheic sediments versus MPs. The medias basic characteristics indicated that the sediments were mostly sand and rich in Fe2O3; three polymer types were identified, with blue, fragment, less than 500 µm being the main types of MPs. The results have shown that the average content of extracted HMs in MPs was much higher than that of the same metals accumulated in sediments. HMs in sediments and MPs reached heavily polluted at some points, among which As and Cd were ecological risks. Electrostatic adsorption and surface complexation, and biofilm-mediated and organic matter complexation were the interaction mechanism of HMs with sediments and MPs. Further, the driving factors affecting the distribution of HMs in the two carriers were analyzed by multivariate statistical analysis. The results demonstrated that carrier characteristics, hydrochemical factors, and the inherent metal load of MPs were the main causes of the high HMs content. These findings improved our understanding of HMs fate and environmental risks across multiple medias.

Enhanced Cadmium Adsorption Dynamics in Water and Soil by Polystyrene Microplastics and Biochar

Microplastics (MPs) are prevalent emerging pollutants in soil environments, acting as carriers for other contaminants and facilitating combined pollution along with toxic metals like cadmium (Cd). This interaction increases toxic effects and poses substantial threats to ecosystems and human health. The objective of this study was to investigate the hydrodynamic adsorption of Cd by conducting experiments where polystyrene microplastics (PS) and biochar (BC) coexisted across various particle sizes (10 µm, 20 µm, and 30 µm). Then, soil incubation experiments were set up under conditions of combined pollution, involving various concentrations (0.5 g·kg-1, 5 g·kg-1, 50 g·kg-1) and particle sizes of PS and BC to assess their synergistic effects on the soil environment. The results suggest that the pseudo-second-order kinetic model (R2 = 0.8642) provides a better description of the adsorption dynamics of Cd by PS and BC compared to the pseudo-first-order kinetic model (R2 = 0.7711), with an adsorption saturation time of 400 min. The Cd adsorption process in the presence of PS and BC is more accurately modeled using the Freundlich isotherm (R2 > 0.98), indicating the predominance of multilayer physical adsorption. The coexistence of 10 µm and 20 µm PS particles with BC enhanced Cd absorption, while 30 µm PS particles had an inhibitory effect. In soil incubation experiments, variations in PS particle size increased the exchangeable Cd speciation by 99.52% and decreased the residual speciation by 18.59%. The addition of microplastics notably impacted the exchangeable Cd speciation (p < 0.05), with smaller PS particles leading to more significant increases in the exchangeable content-showing respective increments of 45.90%, 106.96%, and 145.69%. This study contributes to a deeper understanding of the mitigation mechanisms of biochar in the face of combined pollution from microplastics and heavy metals, offering theoretical support and valuable insights for managing such contamination scenarios.

Toxicity effects and mechanism of micro/nanoplastics and loaded conventional pollutants on zooplankton: An overview

Micro/nanoplastics in aquatic environments is a noteworthy environmental problem. Zooplankton, an important biological group in aquatic ecosystems, readily absorb micro/nanoplastics and produce a range of toxic endpoints due to their small size. This review summarises relevant studies on the effects of micro/nanoplastics on zooplankton, including combined effects with conventional pollutants. Frequently reported adverse effects include acute/chronic lethal effects, oxidative stress, gene expression, energetic homeostasis, and growth and reproduction. Obstruction by plastic entanglement and blockage is the physical mechanism. Genotoxicity and cytotoxicity are molecular mechanisms. Properties of micro/nanoplastics, octanol/water partition coefficients of conventional pollutants, species and intestinal environments are important factors influencing single and combined toxicity. Selecting a wider range of micro/nanoplastics, focusing on the aging process and conducting field studies, adopting diversified zooplankton models, and further advancing the study of mechanisms are the outstanding prospects for deeper understanding of impacts of micro/nanoplastics on aquatic ecosystem.

Microplastics in Asian rivers: Geographical distribution, most detected types, and inconsistency in methodologies

Microplastics pose a significant environmental threat, with potential implications for toxic chemical release, aquatic life endangerment, and human food chain contamination. In Asia, rapid economic growth coupled with inadequate waste management has escalated plastic pollution in rivers, positioning them as focal points for environmental concern. Despite Asia's rivers being considered the most polluted with plastics globally, scholarly attention to microplastics in the region's freshwater environments is a recent development. This study undertakes a systematic review of 228 scholarly articles to map microplastic hotspots in Asian freshwater systems and synthesize current research trends within the continent. Findings reveal a concentration of research in China and Japan, primarily investigating riverine and surface waters through net-based sampling methods. Polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET) emerge as the predominant microplastic types, frequently observed as fibers or fragments. However, the diversity of sampling methodologies and reporting metrics complicates data synthesis, underscoring the need for standardized analytical frameworks to facilitate comparative analysis. This paper delineates the distribution of microplastic hotspots and outlines the prevailing challenges and prospects in microplastic research within Asian freshwater contexts.

Non-negligible impact of microplastics on wetland ecosystems

There has been much concern about microplastic (MP) pollution in marine and soil environments, but attention is gradually shifting towards wetland ecosystems, which are a transitional zone between aquatic and terrestrial ecosystems. This paper comprehensively reviews the sources of MPs in wetland ecosystems, as well as their occurrence characteristics, factors influencing their migration, and their effects on animals, plants, microorganisms, and greenhouse gas (GHG) emissions. It was found that MPs in wetland ecosystems originate mainly from anthropogenic sources (sewage discharge, and agricultural and industrial production) and natural sources (rainfall-runoff, atmospheric deposition, and tidal effects). The most common types and forms of MPs identified in the literature were polyethylene and polypropylene, fibers, and fragments. The migration of MPs in wetlands is influenced by both non-biological factors (the physicochemical properties of MPs, sediment characteristics, and hydrodynamic conditions) and biological factors (the adsorption and growth interception by plant roots, ingestion, and animal excretion). Furthermore, once MPs enter wetland ecosystems, they can impact the resident microorganisms, animals, and plants. They also have a role in global warming because MPs act as unique exogenous carbon sources, and can also influence GHG emissions in wetland ecosystems by affecting the microbial community structure in wetland sediments and abundance of genes associated with GHG emissions. However, further investigation is needed into the influence of MP type, size, and concentration on the GHG emissions in wetlands and the underlying mechanisms. Overall, the accumulation of MPs in wetland ecosystems can have far-reaching consequences for the local ecosystem, human health, and global climate regulation. Understanding the effects of MPs on wetland ecosystems is essential for developing effective management and mitigation strategies to safeguard these valuable and vulnerable environments.

Enhanced biodegradation of microplastic and phthalic acid ester plasticizer: The role of gut microorganisms in black soldier fly larvae

Hermetia illucens larvae are recognized for their ability to mitigate or eliminate contaminants by biodegradation. However, the biodegradation characteristics of microplastics and phthalic acid esters plasticizers, as well as the role of larval gut microorganisms, have remained largely unrevealed. Here, the degradation kinetics of plasticizers, and biodegradation characteristics of microplastics were examined. The role of larval gut microorganisms was investigated. For larval development, microplastics slowed larval growth significantly (P < 0.01), but the effect of plasticizer was not significant. The degradation kinetics of plasticizers were enhanced, resulting in an 8.11 to 20.41-fold decrease in degradation half-life and a 3.34 to 3.82-fold increase in final degradation efficiencies, compared to degradation without larval participation. The depolymerization and biodeterioration of microplastics were conspicuously evident, primarily through a weight loss of 17.63 %-25.52 %, variation of chemical composition and structure, bio-oxidation and bioerosion of microplastic surface. The synergistic effect driven by larval gut microorganisms, each with various functions, facilitated the biodegradation. Specifically, Ignatzschineria, Paenalcaligenes, Moheibacter, Morganella, Dysgonomonas, Stenotrophomonas, Bacteroides, Sphingobacterium, etc., appeared to be the key contributors, owing to their xenobiotic biodegradation and metabolism functions. These findings offered a new perspective on the potential for microplastics and plasticizers biodegradation, assisted by larval gut microbiota.

Assessment of Microplastics and Potentially Toxic Elements in Surface Sediments of the River Kelvin, Central Scotland, United Kingdom

Contamination of the environment by microplastics (MPs), polymer particles of <5 mm in diameter, is an emerging concern globally due to their ubiquitous nature, interactions with pollutants, and adverse effects on aquatic organisms. The majority of studies have focused on marine environments, with freshwater systems only recently attracting attention. The current study investigated the presence, abundance, and distribution of MPs and potentially toxic elements (PTEs) in sediments of the River Kelvin, Scotland, UK. Sediment samples were collected from eight sampling points along the river and were extracted by density separation with NaCl solution. Extracted microplastics were characterised for shape and colour, and the polymer types were determined through attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy. Pollution status and ecological risks were assessed for both the microplastics and PTEs. Abundance of MPs generally increased from the most upstream location (Queenzieburn, 50.0 ± 17.3 particles/kg) to the most downstream sampling point (Kelvingrove Museum, 244 ± 19.2 particles/kg). Fibres were most abundant at all sampling locations, with red, blue, and black being the predominant colours found. Larger polymer fragments were identified as polypropylene and polyethylene. Concentrations of Cr, Cu, Ni, Pb and Zn exceeded Scottish background soil values at some locations. Principal component and Pearson's correlation analyses suggest that As, Cr, Pb and Zn emanated from the same anthropogenic sources. Potential ecological risk assessment indicates that Cd presents a moderate risk to organisms at one location. This study constitutes the first co-investigation of MPs and PTEs in a river system in Scotland.

Effects of combined microplastic and cadmium pollution on sorghum growth, Cd accumulation, and rhizosphere microbial functions

The interaction between microplastics (MPs) and cadmium (Cd) poses a threat to agricultural soil environments, and their effects on plant growth and rhizosphere microbial community functions are not yet clear. In this study, energy sorghum was used as a test plant to investigate the effects of two types of MPs, polystyrene (PS) and polyethylene (PE), at different particle sizes (13 μm, 550 μm) and concentrations (0.1%, 1% w/w), and Cd, as well as their interactions, on the growth of sorghum in a soil-cultivation pot experiment. The results showed that the combined effects of MP and Cd pollution on the dry weight and Cd accumulation rate in sorghum varied depending on the type, concentration, and particle size of the MPs, with an overall trend of increasing stress from combined pollution with increasing Cd content and accumulation. High-throughput sequencing analysis revealed that combined MP and Cd pollution increased bacterial diversity, and the most significant increase was observed in the abundance-based coverage estimator (ACE), Shannon, and Sobs indices in the 13 μm 1% PS+Cd treatment group. Metagenomic analysis based on the Kyoto Encyclopedia of Genes and Genomes (KEGG) metabolic pathways revealed that 19 groups of metabolic pathways, including microbial metabolism and methane metabolism, differed significantly under combined MP and Cd pollution. Hierarchical clustering results indicated that Cd treatment and combined MP and Cd treatment affected the abundances of sorghum rhizosphere soil nitrogen (N) and phosphorus (P) cycling genes and that the type of MP present was an important factor affecting N and P cycling genes. The results of this study provide a basis for exploring the toxic effects of combined MP and Cd pollution and for conducting soil environmental risk assessments.

Polystyrene nanoplastics and cadmium co-exposure aggravated cardiomyocyte damage in mice by regulating PANoptosis pathway

Micro/nanoplastics (M/NPs) are the novel contaminants ubiquitous in the environment. Cadmium (Cd), a kind of heavy metal pollutant widely distributed, could potentially co-exist with PS-NPs in the environment. However, their combined effects on cardiomyocyte and its molecular mechanism in mammals remained ambiguous. Here, we examined whether PANoptosis, an emerging and complicated kind of programmed cell death, was involved in PS-NPs and Cd co-exposure-elicited cardiac injury. In this study, 60 male mice were orally subjected to environmentally relevant concentrations of PS-NPs (1 mg/kg) and/or CdCl2 (1.5 mg/kg) for 35 days. As we speculated, PS-NPs and Cd co-exposure affected the expression of pyroptosis(Caspase-1, Cleaved-Caspase-1, GSDMD, N-GSDMD, AIM2, Pyrin, NLRP3, IL-18, IL-1β)-, apoptosis(Caspase-3, Cleaved-Caspase-3, Caspase-8, Cleaved-Caspase-8, Caspase-7, BAX)- and necroptosis (t-RIPK3, p-RIPK3, t-RIPK1, p-RIPK1, t-MLKL, p-MLKL, ZBP1)-related genes and protein, resulting in growth restriction and damaged myocardial microstructure in mice. Notably, the combined effects on Cd and PS-NPs even predominantly aggravated the toxic damage. Intriguingly, we fortuitously discovered PS-NPs and/or Cd exposure facilitated linear ubiquitination of certain proteins in mice myocardium. In summation, this study shed light toward the effects of Cd and PS-NPs on cardiotoxicity, advanced the understanding of myocardial PANoptosis and provided a scientific foundation for further exploration of the combined toxicological effects of PS-NPs and heavy metals.

Evidence that co-existing cadmium and microplastics have an antagonistic effect on greenhouse gas emissions from paddy field soils

Accumulation of microplastics (MPs) and cadmium (Cd) are ubiquitous in paddy soil. However, the combined effects of MPs and Cd on physiochemical and microbial mechanisms in soils and the attendant implications for greenhouse gas (GHG) emissions, remain largely unknown. Here, we evaluated the influence of polylactic acid (PLA) and polyethylene (PE) MPs on GHG emissions from Cd-contaminated paddy soil using a microcosm experiment under waterlogged and drained conditions. The results showed that PLA significantly increased CH4 and N2O emission fluxes and hence the global warming potential (GWP) of waterlogged soil. Soils treated with MPs+Cd showed significantly reduced GWP compared to those treated only with MPs suggesting that, irrespective of attendant consequences, Cd could alleviate N2O emissions in the presence of MPs. Conversely, the presence of MPs in Cd-contaminated soils tended to alleviate the bioavailability of Cd. Based on a structural equation model analysis, both the MPs-derived dissolved organic matter and the soil bioavailable Cd affected indirectly on soil GHG emissions through their direct influencing on microbial abundance (e.g., Firmicutes, Nitrospirota bacteria). These findings provide new insights into the assessment of GHG emissions and soil/cereal security in response to MPs and Cd coexistence that behaved antagonistically with respect to adverse ecological effects in paddy systems.

Mining strategies for isolating plastic-degrading microorganisms

Plastic waste is a growing global pollutant. Plastic degradation by microorganisms has captured attention as an earth-friendly tactic. Although the mechanisms of plastic degradation by bacteria, fungi, and algae have been explored over the past decade, a large knowledge gap still exists regarding the identification, sorting, and cultivation of efficient plastic degraders, primarily because of their uncultivability. Advances in sequencing techniques and bioinformatics have enabled the identification of microbial degraders and related enzymes and genes involved in plastic biodegradation. In this review, we provide an outline of the situation of plastic degradation and summarize the methods for effective microbial identification using multidisciplinary techniques such as multiomics, meta-analysis, and spectroscopy. This review introduces new strategies for controlling plastic pollution in an environmentally friendly manner. Using this information, highly efficient and colonizing plastic degraders can be mined via targeted sorting and cultivation. In addition, based on the recognized rules and plastic degraders, we can perform an in-depth analysis of the associated degradation mechanism, metabolic features, and interactions.

Optimization of microplastic removal based on the complementarity of constructed wetland and microalgal-based system

As one of the emblematic emerging contaminants, microplastics (MPs) have aroused great public concern. Nevertheless, the global community still insufficiently acknowledges the ecological health risks and resolution strategies of MP pollution. As the nature-based biotechnologies, the constructed wetland (CW) and microalgal-based system (MBS) have been applied in exploring the removal of MPs recently. This review separately presents the removal research (mechanism, interactions, implications, and technical defects) of MPs by a single method of CWs or MBS. But one thing with certitude is that the exclusive usage of these techniques to combat MPs has non-negligible and formidable challenges. The negative impacts of MP accumulation on CWs involve toxicity to macrophytes, substrates blocking, and nitrogen-removing performance inhibition. While MPs restrict MBS practical application by making troubles for separation difficulties of microalgal-based aggregations from effluent. Hence the combined strategy of microalgal-assisted CWs is proposed based on the complementarity of biotechnologies, in an attempt to expand the removing size range of MPs, create more biodegradable conditions and improve the effluent quality. Our work evaluates and forecasts the potential of integrating combination for strengthening micro-polluted wastewater treatment, completing the synergistic removal of MP-based co-pollutants and achieving long-term stability and sustainability, which is expected to provide new insights into MP pollution regulation and control.

Insights into adsorption behavior and mechanism of Cu(II) onto biodegradable and conventional microplastics: Effect of aging process and environmental factors

The widespread promotion attempt of biodegradable plastics is considered as an effective solution to address conventional plastic pollution. However, the interaction of microplastics (MPs) easily broken down from biodegradable plastics with the coexisting pollutants in aquatic environments has gained less attention. Herein, we investigated the effects of the aging process and environmental factors on copper (Cu(II)) adsorption behavior by biodegradable polylactic acid and conventional polystyrene MPs. Results demonstrated that the aging process significantly altered physicochemical properties of both types of MPs, and PLA showed less resistance to aging. The aged polylactic acid MPs (aged-PLA) exhibited the far highest Cu(II) maximum adsorption capacity (7.13 mg/g) mainly due to its abundant oxygen-containing functional groups (OCFGs), followed by pristine polylactic acid (PLA, 6.08 mg/g), aged polystyrene (aged-PS, 0.489 mg/g) and pristine polystyrene (PS, 0.365 mg/g). The adsorption kinetics of Cu(II) on PLA MPs were controlled by film and intraparticle diffusion, while film diffusion governed the Cu(II) adsorption onto PS MPs. In addition to roles of rougher surface structure, greater surface area and pore filling, the complexation of OCFGs and electrostatic interaction were critical to the adsorption mechanism of aged-PLA and aged-PS, and cation-π interaction was associated with adsorption of aged-PS. Moreover, the adsorption capacity of Cu(II) on aged MPs gradually grew with the increasing pH from 4 to 7. Besides, humic acid significantly promoted the adsorption of Cu(II) at a low concentration (0-20 mg/L) due to the formation of binary mixtures of MPs-HA but inhibited the adsorption at a high concentration (50 mg/L) because of its competitive effect, suggesting the dual roles of humic acid in the adsorption process. Overall, our findings provide a better understanding of the adsorption behavior of metals on biodegradable MPs and emphasize their non-negligible risk as carriers of contaminant.

Adsorption of As(III) by microplastics coexisting with antibiotics

Although recent studies have been conducted on the pollution and toxicity of microplastics with heavy metals or antibiotics, it is necessary to further investigate the coexistence of antibiotics and heavy metals on the surface of microplastics. In this study, the mechanisms of As(III) adsorption by polystyrene (PS) and polyamide (PA) microplastics in the presence of antibiotics (ciprofloxacin, CIP) were investigated. Adsorption behavior was investigated using kinetic and isotherm models, and the effects of microplastic particle size, aging, ion concentration, pH, xanthic acid (FA), and tannic acid (TA) were considered. Adsorption kinetics and isotherm models showed that the kinetics of As(III) adsorption on PS were consistent with a pseudo-first-order model; the kinetics of adsorption on PA were more consistent with segmented linear regression. The Freundlich model is consistent with the adsorption isotherms of As(III) on PS and PA. The smaller the microplastic particle size and the longer the aging time, the better the adsorption of As(III). Increasing NO3-significantly inhibited the adsorption of As(III) by PS, while it first promoted and then inhibited the adsorption by PA. The effect of pH was similar to that ofNO3-. The adsorption of As(III) by PS was significantly promoted by FA and TA, regardless of the presence of CIP; the adsorption of As(III) by PA was inhibited. Scanning electron microscopy (SEM) was used to characterize microscopic morphology of pristine and aged PS and PA microplastics; Fourier transform infrared (FTIR) and X-ray absorption spectroscopy (XPS) revealed changes in surface functional groups of PS and PA, while demonstrating the importance of different functional groups in exogenous additives (CIP and dissolved organic matter, DOM) in the adsorption of As(III). This study provides new insight into adsorption behaviors and interaction mechanisms between ternary pollutants.

Iron plaque formation and its influences on the properties of polyethylene plastic surfaces in coastal wetlands: Abiotic factors and bacterial community

Iron (Fe) plaques in coastal wetlands are widely recognized because of their strong adsorption affinity for natural particles, but their interaction behaviors and mechanisms with plastics remain unknown. Through laboratory incubation experiments, paired with multiple characterization methods and microbial analysis, this work focused on the characteristics of Fe plaques on low-density polyethylene plastic surfaces and their relationship with environmental factors in coastal wetlands (Mangrove and Spartina alterniflora soil). The results showed that iron plaques increased the adhesive force of the plastic surface from 65.25 to 300 nN and promoted the oxidation of the plastic surface. Fe plaque formation was stimulated by salinity, anaerobic conditions, natural organic matter, and a weak alkaline scenario (pH 8.0-8.3). The Fe content showed a stable positive correlation with heavy metals loading (i.e., As, Mn, Co, Cr, Pb, and Zn). Furthermore, we revealed that Fe plaque was positively regulated by Nitrospirae through 16S rRNA high-throughput sequencing analysis. Meanwhile, Verrucomicrobia and Kiritimatiellaeota. may act as depressants by consuming salt. This work illustrated that iron plaques could enhance the role of plastics in contaminant migration by altering their adsorption performance, providing new insights into plastic interface behavior and potential ecological effects in coastal wetlands.

Microplastics and potentially toxic elements: A review of interactions, fate and bioavailability in the environment

In recent years, microplastics (MPs) have obtained growing public concern due to widespread distribution and harmful impacts. Their distinctive features including porous structure, small size, as well as large specific surface area render MPs to be carriers for transporting other pollutants in the environment, especially potentially toxic elements (PTEs). Considering the hot topic of MPs, it is of great significance to comb the reported literature on environmental behaviors of co-occurrence of MPs and PTEs, and systematically discuss their co-mobility, transportation and biotoxicity to different living organisms in diverse environmental media. Therefore, the aim of this work is to systematically review and summarize recent advances on interactions and co-toxicity of MPs and PTEs, in order to provide in-depth understanding on the transport behaviors as well as environmental impacts. Electrostatic attraction and surface complexation mainly govern the interactions between MPs and PTEs, which are subordinated by other physical sorption processes. Besides, the adsorption behaviors are mainly determined by physicochemical properties regarding to different MPs types and various condition factors (e.g., ageing and PTEs concentrations, presence of substances). Generally speaking, recently published papers make a great progress in elucidating the mechanisms, impact factors, as well as thermodynamic and kinetic studies. Bioavailability and bioaccumulation by plant, microbes, and other organisms in both aquatic and terrestrial environment have also been under investigation. This review will shed novel perspectives on future research to meet the sustainable development goals, and obtain critical insights on revealing comprehensive mechanisms. It is crucial to promote efficient approaches on environmental quality improvement as well as management strategies towards the challenge of MPs-PTEs.

Distribution and migration of heavy metals in the sediment-plant system: Case study of a large-scale constructed wetland for sewage treatment

Constructed wetlands are extensively applied in wastewater treatment and water ecosystem restoration. However, the characteristics of heavy metals accumulation and migration in a long-running large-scale constructed wetland for wastewater treatment remain unclear. In this study, the variation of heavy metals (Cu, Zn, Pb, Cd, Cr, and As) in the sediment-plant system of a wetland that has been operating for 14 years was quantified. Results show that the sediments of the constructed wetland were the sink for heavy metals. All heavy metals, except As, significantly increased (P < 0.05) in sediments within 0-40 cm depth, and Zn and Cr had leaked to 40-60 cm depth (P < 0.05). Along with the surface flow direction, heavy metal concentrations mostly showed a declining trend, and in comparison, Cu and Cr transported longer distances. Bioconcentration factors show that the two common wetland plants, Phragmites australis and Typha latifolia, exhibited obvious differences in enrichment performance of heavy metals, with the orders of Zn > Cr > Cd > Cu > Pb > As and Cd > Zn > Cr > Cu > As > Pb, respectively. The translocation factors of the two kinds of plants were less than 1 suggesting that they are suitable for phytostabilization. Redundancy analysis indicates that sediment organic matter was the primary environmental factor affecting the distribution and migration of heavy metals in the wetland system. The discrepancy in the migration characteristics of pollutants, especially heavy metals, should be seriously considered in the design and management of wetland systems, including highly-enrichment plants, appropriate hydraulic residence time, and effective surficial filling medium.

Occurrence of microplastic pollution in rivers globally: Driving factors of distribution and ecological risk assessment

Microplastics, as global emerging pollutants, have received significant attention worldwide due to their ubiquitous presence in the rivers. However, there is still a lack of clarity on the occurrence, driving factors, and ecological risks of microplastics in rivers worldwide. In this study, a global microplastic dataset based on 862 water samples and 445 sediment samples obtained from 63 articles was constructed, which revealed the temporal and spatial distribution of abundance and morphological characteristics of microplastics in rivers across the globe. In global rivers, the abundance of MPs in both water and sediment spans across 10 and 4 orders of magnitude, respectively. The MP comprehensive diversity index based on the physical morphological characteristics of MPs indicated a significant positive correlation between the pollution sources of MPs in different environmental media. Based on the data was aligned to the full-scale MPs, a novel framework was provided to evaluate the ecological risk of MPs and the interaction effects between the influencing factors driving the distribution characteristics of MPs in rivers around the world. The results obtained demonstrated a wide variation in the key driving factors affecting the distribution of microplastics in different environmental media (water and sediment) in rivers globally. The diversity indices of the morphological characteristics of MPs in densely populated areas of lower-middle income countries in Asia were significantly higher, implying that the sources of microplastics in these regions are more complex and extensive. More than half of the rivers are exposed to potential ecological risks of MPs; however, microplastics may pose only immediate risks to aquatic species in Burigang River, Bangladesh. This can provide valuable insights for formulating more effective scientific strategies for the management of MP pollution in rivers.

Surface functional groups and biofilm formation on microplastics: Environmental implications

Microplastics (MPs) contamination is becoming a significant environmental issue, as the widespread omnipresence of MPs can cause many adverse consequences for both ecological systems and humans. Contrary to what is commonly thought, the toxicity-inducing MPs are not the original pristine plastics; rather, they are completely transformed through various surface functional groups and aggressive biofilm formation on MPs via aging or weathering processes. Therefore, understanding the impacts of MPs' surface functional groups and biofilm formation on biogeochemical processes, such as environmental fate, transport, and toxicity, is crucial. In this review, we present a comprehensive summary of the distinctive impact that surface functional groups and biofilm formation of MPs have on their significant biogeochemical behavior in various environmental media, as well as their toxicity and biological effects. We place emphasis on the role of surface functional groups and biofilm formation as a means of influencing the biogeochemical processes of MPs. This includes their effects on pollutant fate and element cycling, which in turn impacts the aggregation, transport, and toxicity of MPs. Ultimately, future research studies and tactics are needed to improve our understanding of the biogeochemical processes that are influenced by the surface functional groups and biofilm formation of MPs.

Alteration of microbial mediated carbon cycle and antibiotic resistance genes during plastisphere formation in coastal area

Microorganisms can attach on the surface of microplastics (MPs) through biological fouling process to form a diverse community called the "plastisphere", which has attracted extensive attention. Although the microbial structure and composition of biofilm have been studied, the knowledge of its microbial function and ecological risk is still limited. In this study, we investigated how the surface properties of MPs affect the biofilm communities and metabolic features under different environmental conditions, and explored the biofilm enrichment of antibiotic resistance genes (ARGs). The results showed that the incubation time, habitat and MPs aging state significantly influenced the structure and composition of biofilm microbial communities, and a small amount of pathogens have been found in the MPs-attached biofilm. The microbial carbon utilization capacity of the biofilm in different incubation habitats varies greatly with highest metabolism capacity appear in the river. The utilization efficiency of different carbon sources is polymer > carbohydrate > amino acid > carboxylic acids > amine/amide, which indicates that the biofilm communities have selectivity between different types of carbon sources. More importantly, ARGs were detected in all the MPs samples and showed a trend of estuary > river > marine. The aged MPs can accumulate more ARGs than the virgin items. In general, MPs in the aquatic environment may become a carrier for pathogens and ARGs to spread to other environment, which may enhance their potential risks to the ecosystem and human health.

Removal characteristics of microplastics in sewage flowing through a long-term operation surface flow wetland

Microplastics (MPs) in sewage pose significant threats to aquatic system. Surface flow wetland (SFW) is a common natural wetland type, and is also used as a cheap and easy-to-build sewage treatment system for small and scattered settlements. However, seasonal variation patterns of MPs in sewage removed by SFW are still limited. Therefore, a field investigation was conducted in an SFW that has been operated for 17 years. The concentration of microplastics in the influent of the SFW (CMPs, in) ranged from 56 ± 6 to 250 ± 14 items L-1. The dominant plastic types were fibers and polyethylene terephthalate (PET). CMPs, in were high in summer and winter, significantly related to the seasonal dressing habits. The removal efficiencies of MPs in SFW were 48.03-92.32 % in different seasons, and the mechanisms of MP removal were different with traditional pollutants. Before flowing out occasionally or by heavy precipitation, MPs were primarily trapped in the SFW and underwent certain oxidation. Simulation experiments demonstrated that 47.5-92.9 % of MPs would be trapped in the SFW, and plants would significantly enhance the trapping capacities. This study sheds light on the seasonal variation characteristics and patterns of MPs in actual sewage, and clarifies the fate of MPs in a long-term operation SFW.

Polyethylene Microplastics Affected Survival Rate, Food Intake and Altered Oxidative Stress Parameters in Freshwater Snail Indoplanorbis exustus

Microplastics have a negative impact on aquatic ecosystems. Gastropod mollusks serve as bioindicators and are good model systems for ecotoxicological studies. To assess oxidative damage, we exposed the ram's horn snail, Indoplanorbis exustus, to various concentrations of low-density polyethylene microplastics (size range 8-100 µm). The main objectives were microplastics preparation, characterization, and examination of their effect on the essential organs of I. exustus. Scanning electron microscopy, fourier transform infrared spectroscopy and x-ray diffraction techniques confirmed the polymer type of laboratory prepared polyethylene microplastics. The LC50 value of microplastics for snails was calculated to be 872 mg/L after 96 h of exposure. We observed a significant elevation in superoxide dismutase, catalase and lipid peroxidation levels with increasing concentrations of microplastics. Microplastics exposure also affected protein content, total food intake and total weights. Moreover, snails failed to recover post-treatment. Snails collected from contaminated source of microplastics served as positive control for the study. Hence, we can conclude that microplastics cause overall impairment in the physiological parameters and show adverse effects on the freshwater snail, I. exustus.

Toxicological impacts of microplastics on human health: a bibliometric analysis

Plastic has been known as an artificial polymer whereas environmental microplastics become a global concern. Microplastics are reported to cause immunotoxicity in humans through gut deposition and entering the bloodstream. This study is a comprehensive indication of the recent research on microplastic toxicity in the gastrointestinal system. We performed bibliographic analysis using VOS viewer software and analyzed the data received on microplastics and their impact on gut health which has grown exponentially since 2016. Recent findings also support microplastic toxicity in combination with heavy metals. The smaller particle size and other factors enhanced the adsorption ability of environmental contamination such as heavy metals on microplastic which increased their bioaccumulation. Such toxic complexes of heavy metals and microplastics are a concern to natural ecosystems and environmental biologists. Few reports also demonstrated the biofilm formation on microplastic surfaces which might cause greater environmental as well as human health risks. Notably, terms of determining the microplastics in human tissues through several analytical techniques are still limited to some extent. Future research should be focused on the quantification of microplastics in human tissues, the combined effect of microplastics with other contaminants, and their effects on pre-existing diseases. This study boosts understanding of the potential impacts of microplastic and nanoplastic toxicity in the human gastrointestinal system.

Co-exposure of microplastics and heavy metals in the marine environment and remediation techniques: a comprehensive review

Microplastics (MPs) and heavy metals are significant pollutants in the marine environment, necessitating effective remediation strategies to prevent their release into the sea through sewage and industrial effluent. This comprehensive review explores the current understanding of the co-exposure of MPs and heavy metal-enriched MPs, highlighting the need for effective remediation methods. Various mechanisms, including surface ion complexation, hydrogen bonding, and electrostatic forces, contribute to the adsorption of heavy metals onto MPs, with factors like surface area and environmental exposure duration playing crucial roles. Additionally, biofilm formation on MPs alters their chemical properties, influencing metal adsorption behaviors. Different thermodynamic models are used to explain the adsorption mechanisms of heavy metals on MPs. The adsorption process is influenced by various factors, including the morphological characteristics of MPs, their adsorption capacity, and environmental conditions. Additionally, the desorption of heavy metals from MPs has implications for their bioavailability and poses risks to marine organisms, emphasizing the importance of source reduction and remedial measures. Hybrid approaches that combine both conventional and modern technologies show promise for the efficient removal of MPs and heavy metals from marine environments. This review identifies critical gaps in existing research that should be addressed in future studies including standardized sampling methods to ensure accurate data, further investigation into the specific interactions between MPs and metals, and the development of hybrid technologies at an industrial scale. Overall, this review sheds light on the adsorption and desorption mechanisms of heavy metal-enriched MPs, underscoring the necessity of implementing effective remediation strategies.

Ameliorative effect of natural floating island as fish aggregating devices on heavy metals distribution in a freshwater wetland

Growing human population and climate change are leading reasons for water quality deterioration globally; and ecologically important waterbodies including freshwater wetlands are in a vulnerable state due to increasing concentrations of pollutants like heavy metals. Given the declining health of these valuable resources, the present study was conducted to evaluate the effect of natural floating island in the form of fish aggregating devices (FADs) made of native weed mass on the distribution of heavy metals in the abiotic and bio compartments of a freshwater wetland. Lower concentrations of surface water heavy metals were observed inside the FADs with a reduction of 73.91%, 65.22% and 40.57-49.16% for Cd, Pb and other metals (viz. Co, Cr, Cu, Ni and Zn), respectively as compared to outside FAD. These led to 14.72-55.39% reduction in the heavy metal pollution indices inside the FAD surface water. The fish species inside the FADs were also found less contaminated (24.07-25.07% reduction) with lower health risk indices. The study signifies the valuable contribution of natural floating island as FADs in ameliorating the effect of heavy metals pollution emphasizing the tremendous role of the natural floating islands in sustainable maintenance of freshwater wetlands for better human health and livelihood.

Tracing microplastics in rural drinking water in Chongqing, China: Their presence and pathways from source to tap

Despite the significant attention given to microplastics in urban areas, our understanding of microplastics in rural drinking water systems is still limited. To address this knowledge gap, we investigated the presence and pathways of microplastics in rural drinking water system, including reservoir, water treatment plant (WTP), and tap water of end-users. The results showed that the treatment processes in the WTP, including coagulation-sedimentation, sand-granular active carbon filtration, and ultrafiltration, completely removed microplastics from the influent. However, the microplastic abundance increased during pipe transport from WTP to residents' homes, resulting in the presence of 1.4 particles/L of microplastics in tap water. This microplastic increase was also observed during the transportation from the reservoir to the WTP, suggesting that the plastic pipe network is a key source of microplastics in the drinking water system. The main types of polymers were PET, PP, and PE, and plastic breakdown, atmospheric deposition, and surface runoff were considered as their potential sources. Furthermore, this study estimated that rural residents could ingest up to 1034 microplastics annually by drinking 2 L of tap water every day. Overall, these findings provide essential data and preliminary insights into the fate of microplastics in rural drinking water systems.

Insights into interactions of biodegradable and non-biodegradable microplastics with heavy metals

Biodegradable microplastics (BMPs) are considered to be environmentally friendly compared to non-biodegradable plastics (NMPs). However, BMPs are likely to become toxic during their transport because of the adsorption of pollutants (e.g., heavy metals) onto them. This study investigated the uptake of six heavy metals (Cd2+, Cu2+, Cr3+, Ni2+, Pb2+, and Zn2+) by a common BMPs (polylactic acid (PLA)) and compared their adsorption characteristics to those of three types of NMPs (polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC)) for the first time. The order of heavy metal adsorption capacity among the four MPs was PE > PLA > PVC > PP. The findings suggest that BMPs contained more toxic heavy metals than some NMPs. Among the six heavy metals, Cr3+ showed considerably stronger adsorption than other heavy metals in both BMPS and NMPs. The adsorption of heavy metals on MPs can be well explained using the Langmuir isotherm model, while the adsorption kinetic curves showed the best fit to the pseudo-second-order kinetic equation. Desorption experiments revealed that BMPs released a higher percentage of heavy metals (54.6-62.6%) in the acidic environment in a shorter time (~ 6 h) compared to NMPs. Overall, this study provides insights into interactions of BMPs and NMPs with heavy metals and their removal mechanisms in aquatic environment.

Bioaccumulation of polystyrene microplastics and changes in antioxidant and AChE pattern in a freshwater snail (Filopaludina bengalensis) from river Ganga

Microplastic pollution is a leading global problem affecting terrestrial and marine aquatic ecosystems. Due to the stagnant nature of microplastics, the toxic effect of microplastics is more pronounced to benthic organisms than the surface feeder. Hence, the present study effort was to study the microplastic bioaccumulation pattern and changes in the enzymatic and nonenzymatic antioxidant and AChE pattern of freshwater snail Filopaludina bengalensis, which were subjected to 0.5 ppm to 5 ppm levels of polystyrene microsphere (∼ 30 µm) for 27 days. The study showed that microplastics were easily accumulated in the test organism in a dose and time-dependent manner, amounting to 82 ± 6.02 particles /individuals at a 5 ppm dose on the 27th day. However, no mortality was observed at the test microplastic dosages. The enzymatic antioxidant profile (SOD and catalase) showed limited variability and remained stable with increased duration and microplastic dose. However, the nonenzymatic antioxidant profile showed distinct variability with the complete seizing of the DPPH activity on the 27th day at 5 ppm microplastic dose and a gradual decrease of ABTS and FRAP activity at all the dose ranges. Even the AChE activity decreased with higher exposure concentrations. The present study for the first time shows the direct impact of microplastics on a freshwater snail widely available in the Indian subcontinent, indicating the role of microplastic pollution will create havoc in the Ganga river eco-biosystem in the long run.

A review on the occurrence, analytical methods, and impact of microplastics in the environment

Nowadays, microplastic pollution is one of the globally urgent concerns as a result of discharging plastic products into the atmosphere, aquatic and soil environments. Microplastics have average size of less than 5 mm, are non-biodegradable, accumulative, and highly persistent substances. Thousands of tons of microplastics are still accumulated in various environments, posing an enormous threat to human health and living creatures. Here, we review the occurrence and analytical methods, and impact of microplastics in the environments including soil, aquatic media, and atmosphere. Analytical methods including visual observation, Fourier-transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, and pyrolysis-gas chromatography-mass spectrometry were evaluated. We elucidated the environmental and human health impacts of microplastics with emphasis on life malfunction, immune disruption, neurotoxicity, diseases and other tangible health risks. This review also found some shortages of analytical equivalence and/or standardization, inconsistence in sampling collection and limited knowledge of microplastic toxicity. It is hopeful that the present work not only affords a more insight into the potential dangers of microplastics on human health but also urges future researches to establish new standardizations in analytical methods.

Current trends in the detection and removal of heavy metal ions using functional materials

The shortage of freshwater resources caused by heavy metal pollution is an acute global issue, which has a great impact on environmental protection and human health. Therefore, the exploitation of new strategies for designing and synthesizing green, efficient, and economical materials for the detection and removal of heavy metal ions is crucial. Among the various methods for the detection and removal of heavy ions, advanced functional systems including nanomaterials, polymers, porous materials, and biomaterials have attracted considerable attention over the past several years due to their capabilities of real-time detection, excellent removal efficiency, anti-interference, quick response, high selectivity, and low limit of detection. In this tutorial review, we review the general design principles underlying the aforementioned functional materials, and in particular highlight the fundamental mechanisms and specific examples of detecting and removing heavy metal ions. Additionally, the methods which enhance water purification quality using these functional materials have been reviewed, also current challenges and opportunities in this exciting field have been highlighted, including the fabrication, subsequent treatment, and potential future applications of such functional materials. We envision that this tutorial review will provide invaluable guidance for the design of functional materials tailored towards the detection and removal of heavy metals, thereby expediting the development of high-performance materials and fostering the development of more efficient approaches to water pollution remediation.

Non-Negligible Ecological Risks of Urban Wetlands Caused by Cd and Hg on the Qinghai-Tibet Plateau, China

The Huangshui National Wetland Park (HNWP) is a unique national wetland park in a city on the Qinghai-Tibetan Plateau, containing three zones: Haihu, Beichuan, and Ninghu. In this study, a total of 54 soil samples (18 sampling points with depths of 0-10 cm, 10-20 cm, and 20-30 cm) were collected in these three zones, and the contents of heavy metals (Cr, Cd, Cu, Hg, Ni, Pb, Zn, and As) of each sample were determined. The ecological risk of eight kinds of heavy metals was evaluated by using the geo-accumulation index (Igeo), and the ecological risk-controlling effect of the Xining urban wetlands on heavy metals was explored by comparative analysis, and the possible sources of heavy metals in the soil were analyzed via correlation analysis and principal component analysis (PCA). The results revealed that the total heavy metal concentration order was Haihu > Beichuan > Ninghu zone. As and Cu presented vertical accumulation characteristics in the surface and lower horizon, respectively. Cr, Cd, Hg, Ni, Pb, and Zn accumulated downwards along the depth. On the spatial scale, the enrichments of Cd and Hg brought non-negligible ecological risks in plateau urban wetlands. The results of PCA indicated that soil heavy metals mainly came from compound sources of domestic and atmospheric influences, traffic pollution sources, and industrial pollution sources. The study has revealed that human activities have inevitable negative impacts on wetland ecosystems, while the HNWP provides a significant weakening effect on heavy metal pollution.

Separation of lead from aqueous phase by cucumber peel in column bioreactor: A phenomenon of interaction between biological and chemical system and its ecological importance

This research work represents a holistic approach of separation of aqueous lead through dynamic adsorption on cucumber peel in fixed bed column bioreactor and highlights the biological perspective of mode of interaction between adsorbent and adsorbate. Additionally attempt has been made to elucidate the importance of this process in preservation of aquatic ecosystem. The study illustrates influence of design parameters, periodic surveillance of generated effluents, statistical and mathematical model analyses of results and desorption. The findings exhibited a direct association between quality of treated effluent and speed of the feed solution, feed concentration and height of the fixed bed. Lead removal percentage was at its best (99.25%) at 8 cm bed height, 20 mL min^-1 (0.9 L h^-1) flow rate and 50 mg L^-1 feed concentration whereas adsorption capacity reached its peak (300.26 mg g^-1) when feed concentration was doubled up to 100 mg L^-1. Time bound monitoring confirmed concentration of lead in treated effluents remained within satisfactory level. Adsorbed lead was recovered up to ∼95%. Experimentation with actual industrial effluents demonstrated that lead removal percentage remained in the range of 99.97-99.46% and 99.96-99.17% up to the entire phase of bioreactor operation. In summation proper combination of design parameters of column bioreactor played important role in generating superior quality effluent, multiple reuse of the bioreactor bed was dependent on proper eluant treatment and practicability of the study was ascertained by its ability to maintain concentration of lead in actual industrial effluents within permissible limit for prolonged duration.

Abundance, characteristics, and removal of microplastics in the Cihu Lake-wetland microcosm system

Sewage treatment plants (STPs) are significant routes through which microplastics (MPs) are released into the aquatic environment. Constructed wetland is an effective facility for deep treatment of tailwater. At present, research on the removal of MPs in the tailwater of STPs by multi-stage constructed wetlands is limited. This work investigated and analyzed the removal characteristics of MPs in the tailwater treatment system of Cihu wetland park in Huangshi, Hubei Province of China. The abundance/removal of MPs in the Cihu Lake-wetland microcosm system was investigated. The results showed that the multi-stage constructed wetlands achieved a total removal rate of 94.7% for MPs with 2.2 particles/L MPs in the effluent. The removal rates of MPs reached 89 and 37.5%, respectively, in the (horizontal/vertical) subsurface flow constructed wetland and surface flow constructed wetland. The abundance of MPs in receiving water of Cihu Lake substantially decreased due to the dilution of wetland effluents. This study partially bridged the knowledge gap hypothesis on the treatment of MPs in tailwater by multi-stage constructed wetlands.

Recent advances towards micro(nano)plastics research in wetland ecosystems: A systematic review on sources, removal, and ecological impacts

In recent years, microplastics/nanoplastics (MPs/NPs) have received substantial attention worldwide owing to their wide applications, persistence, and potential risks. Wetland systems are considered to be an important "sink" for MPs/NPs, which can have potential ecological and environmental effects on the ecosystem. This paper provides a comprehensive and systematic review of the sources and characteristics of MPs/NPs in wetland ecosystems, together with a detailed analysis of MP/NP removal and associated mechanisms in wetland systems. In addition, the eco-toxicological effects of MPs/NPs in wetland ecosystems, including plant, animal, and microbial responses, were reviewed with a focus on changes in the microbial community relevant to pollutant removal. The effects of MPs/NPs exposure on conventional pollutant removal by wetland systems and their greenhouse gas emissions are also discussed. Finally, current knowledge gaps and future recommendations are presented, including the ecological impact of exposure to various MPs/NPs on wetland ecosystems and the ecological risks of MPs/NPs associated with the migration of different contaminants and antibiotic resistance genes. This work will facilitate a better understanding of the sources, characteristics, and environmental and ecological impacts of MPs/NPs in wetland ecosystems, and provide a new perspective to promote development in this field.

Effects of size and surface charge on the sedimentation of nanoplastics in freshwater

The environmental issues caused by nanoplastics (NPs) are increasingly noticeable. Environmental behavior study of the NPs could provide vital information for their environmental impact assessment. However, associations between NPs' inherent properties and their sedimentation behaviors were seldom investigated. In this study, six types of PSNPs (polystyrene nanoplastics) with different charges (positive and negative) and particle sizes (20-50 nm, 150-190 nm and 220-250 nm) were synthesized, and their sedimentations under different environmental factors, (e.g., pH value, ionic strength (IS), electrolyte type and natural organic matter) were investigated. Results displayed that both particle size and surface charge would affect the sedimentation of PSNPs. The maximum sedimentation ratio of 26.48% was obtained in positive charged PSNPs with size of 20-50 nm, while the minimum sedimentation ratio of 1.02% was obtained in negative charged PSNPs with size of 220-250 nm at pH 7.6. The pH value shift (range of 5-10) triggered negligible changes of sedimentation ratio, the average particle size and the Zeta potential. Small size PSNPs (20-50 nm) showed higher sensitivity to IS, electrolyte type and HA condition than large size PSNPs. At high IS value ( [Formula: see text]  = 30 mM or IS_NaCl = 100 mM), the sedimentation ratios of the PSNPs all increased differently according to their properties, and the sedimentation promoting effect of CaCl₂ was more significant on negative charged PSNPs than positive charged PSNPs. When [Formula: see text] increased from 0.9 to 9 mM, the sedimentation ratios of negative charged PSNPs increased by 0.53%-23.49%, while that of positive charged PSNPs increased by less than 10%. Besides, humic acid (HA) addition (1-10 mg/L) would lead to a stable suspension status for PSNPs in water with different degree and perhaps different mechanism due to their charge characteristics. These results showed new light on influence factor studies of NPs' sedimentation and would be helpful for further knowledge of NPs' environmental behaviors.

Seasonal pulse effect of microplastics in the river catchment-From tributary catchment to mainstream

Rivers have received extensive attention as a major pathway for microplastics (<5000 μm) from land to ocean. This study investigated the seasonal variation of microplastic contamination in surface water of the Liangfeng River catchment, a tributary of the Li River in China, based on a fluorescence-based protocol, and further explored the migration process of microplastic in the river catchment. The abundance of microplastics (50-5000 μm) was (6.20 ± 0.57)-(41.93 ± 8.13) items/L, of which 57.89-95.12% were small-sized microplastics (<330 μm). The microplastic fluxes in the upper Liangfeng River, lower Liangfeng River, and upper Li River were (14.89 ± 1.24) × 10¹², (5.71 ± 1.15) × 10¹², and (1.54 ± 0.55) × 10¹⁴ items/year, respectively. The 3.70% of microplastic load in the mainstream came from the tributary input. Fluvial processes can effectively retain 61.68% of microplastics in the surface water of river catchments, especially for small-sized microplastics. The rainy season is the main period of microplastic retention (91.87%) in the tributary catchment by fluvial processes, while exporting 77.42% of one-year microplastic emissions from the tributary catchment into the mainstream. This study is the first to reveal the transport characteristics of small-sized microplastics in river catchments based on flux variation, which not only can partly explain the "missing small-sized microplastic fraction" in the ocean, but also contribute to improving microplastic model.

Metal leaching from plastics in the marine environment: An ignored role of biofilm

A large quantity of metal compounds in plastics are released into the marine environment every year. However, our understanding of the extent and mechanism by which polymer-bound metals leach into seawater is still limited. In this study, a comprehensive survey was conducted to measure the metal concentrations in commonly used plastics and evaluate the effects of environmental factors (temperature, radiation, and salinity) and the physiochemical properties (surface roughness, specific surface area, hydrophobicity, and crystallinity) of the plastics on their metal leaching into seawater. In particular, we observed the metal loss from six plastics submerged in coastal seawater for eight months and studied the role of biofilm in controlling the leaching of Sb, Sn, Pb, Ba, and Cr. Our results indicate that increased temperature enhanced the release of these metals, while exposure to ultraviolet radiation significantly increased the leaching of Sn from polylactide (PLA). High salinity facilitated the leaching of Sn from PLA and Pb from polyvinylchloride ball, however inhibited the leaching of Ba from PE wrap. The leaching rate was primarily determined by the inherent property of crystallinity. Metal loss from the plastics in the field was apparent during the first three weeks, but then was hindered by the development of biofilm. Our study provides the mechanisms underlying metal leaching from physical, chemical, and biological perspectives, which is useful for understanding the environmental risk of the plastic-containing metals.

Microplastics as emergent contaminants in landfill leachate: Source, potential impact and remediation technologies

A significant amount of plastic waste is generated each year on a global scale, in which the maximum quantity of plastic waste is typically dumped in landfills in various parts of the world. Moreover, dumping plastic waste in landfills cannot address the issue of proper disposal; it simply delays the process. Exploiting waste resources entails environmental hazards because plastic wastes buried in landfills gradually break down into Microplastics (MPs) due to physical, chemical, and biological effects. The possibility of landfill leachate as a source of MPs in the environment has not received much attention. Without systematic treatment, MPs in leachate increase the risk to human health and environmental health since they contain dangerous and toxic pollutants and antibiotic resistance genes transmitted by leachate vectors. Due to their severe environmental risks, MPs are now widely recognized as emerging pollutants. Therefore, the composition of MPs in landfill leachate and the interaction of MPs with other hazardous contaminants are summarised in this review. The available potential mitigation or treatment methods of MPs in landfill leachate as of now, along with the drawbacks and challenges of the present leachate treatment for eliminating MPs, are described in this review. Since it is unclear how MPs will be removed from the current leachate facilities, it is crucial to develop innovative treatment facilities as quickly as possible. Finally, the areas that require more research to provide complete solutions to the persistent problem of plastic debris are discussed.

Microplastics occurrence and fate in full-scale treatment wetlands

Treatment wetlands (TWs) are an efficient technology for removing microplastics (MPs) from wastewater, according to previous studies. This study investigates the dynamics and fate of MPs in two wastewater treatment plants (WWTPs) using TWs, one with horizontal subsurface flow (HF) and another with a floating plant system (FS). Special attention is paid to the retention produced in the sludge and the role of macrophyte roots. The abundance of MPs in the influent to the WWTPs was on average 20.3 ± 0.85 MP/L and 8.4 ± 1.13 MP/L in HF and FS respectively, while the effluent had 0.58 ± 0.07 MP/L and 0.17 ± 0.06 MP/L, thus giving overall efficiencies of 97.42% and 98.13%, respectively. In the HF wetland, sludge samples near the inlet and the outlet were taken, distinguishing between sludge adhered to gravel and sludge attached to roots. In the floating macrophytes, sludge samples from secondary and tertiary treatments were taken. The results indicate that roots play a significant role in MPs retention. In the HF wetland, the complex formed by roots and gravel attached more MPs than gravel alone in the final zone of the wetland. In the FS, roots retained a significant quantity of MPs, both in the secondary and tertiary treatments, thus giving rise to a sludge less concentrated in MPs. This study aims to improve the knowledge of MPs behavior and fate in full-scale TWs, providing valuable information to enhance retention efficiency.

Evaluation of microplastic contamination by metals in a controlled environment: A risk to be considered

The metal contamination and the degradation of polyethylene terephthalate (PET) due to human activities have contributed to the worsening of environmental problems in aquatic systems. Therefore, the study aimed to evaluate PET microplastic adsorption levels when exposed to high amounts of Ni, Cu and Co. The PET microplastic was characterized by scanning electron microscopy, Brunner-Emmet-Teller, porosimetry system, Barrett-Joyner-Halenda and Fourier transform infrared spectroscopy with attenuated total reflectance for evaluation of surface morphology, surface area, porosity, pore size and functional groups, respectively. The results showed that the surface area, the presence of macro and mesopores, and the functional groups influence the adsorption of metals on the surface of PET microplastic. The adsorption isotherms confirmed the presence of mesoporosity and macroporosity on the PET microplastic surface. The Freundlich and Langmuir models were used to study the adsorption capacity. The kinetics of adsorptions were interpreted using pseudo-first order and pseudo-second order models. The results indicated that the Langmuir isotherm and the pseudo-second order adequately described the adsorption of metals by the PET microplastic. The removal rates by the PET microplastic varied from 8 to 34% for Ni, 5 to 40% for Cu and 7 to 27% for Co after a period of 5 days. Furthermore, the adsorption was predominantly chemical and extremely fast, indicating that the presence of microplastics in the environment can lead to a rapid metal accumulation which elevates the hazards potential of microplastic in living beings.

Micro- and mesoplastic pollution along the coast of Peru

Peru suffers from poor solid waste and coastal management, as well as evidenced plastic pollution in various forms. However, studies in Peru focusing on small plastic debris (i.e., meso- and microplastics) are still limited and inconclusive. Thus, the present study investigated the abundance, characteristics, seasonality, and distribution of small plastic debris along the coast of Peru. The abundance of small plastic debris is predominantly driven by specific locations, where a source of contamination is present, rather than presenting seasonal patterns. Meso- and microplastics were strongly correlated in both seasons (summer and winter), suggesting meso-plastic constantly breaking down as microplastic sources. Additionally, heavy metals (e.g., Cu, Pb) were found in low concentrations (mean concentrations < 0.4%) on the surface of some mesoplastics. Here, we provided a baseline on the multiple factors involving small plastic debris on the Peruvian coast and preliminarily identify associated contaminants.

Impact of microplastics on lead-contaminated riverine sediments: Based on the enzyme activities, DOM fractions, and bacterial community structure

Microplastics (MPs) are able to interact with diverse contaminants in sediments. However, the impacts of MPs on sediment properties and bacterial community structure in heavy metal-contaminated sediments remain unclear. In this study, we investigated the adsorption of Pb(II) by sediment-MPs mixtures and the effects of different concentration MPs on sediment enzyme activities, DOM fractions, and Pb bioavailability in riverine sediments, and further explored the response of sediment microbial community to Pb in the presence of MPs. The results indicated that the addition of MPs significantly decreased the adsorption amount of Pb(II) by sediments, especially decreased by 12.6% at 10% MPs treatment. Besides, the changes in enzyme activities, DOM fractions exhibited dose-dependent effects of MPs. The higher level of MPs (5% and 10%) tends to transform Pb into more bioavailable fractions in sediments. Also, MPs amendment was observed to alter sediment bacterial community structures, and community differences were evident in the uncontaminated and lead-contaminated sediments. Therein, significant increase of Bacteroidota, Proteobacteria and decrease of Firmicutes abundance in Pb-contaminated sediment at the phylum level were observed. These findings are expected to provide comprehensive information for assessing the combined ecological risks of heavy metals and MPs in riverine sediments.