Microplastics extraction from wastewater treatment plants: Two-step digestion pre-treatment and application

Source identification of microplastics in highly urbanized river environments and its implications for watershed management

The extensive use of plastic products has resulted in a significant influx of microplastics into aquatic ecosystems, particularly in highly urbanized areas and their associated river environments. However, the specific pathways and quantities through which these microplastics enter the river environment are still unclear, which poses a challenge in developing effective measures to mitigate their sources. In this paper, the spatiotemporal variations of microplastics from different sources in highly urbanized rivers within the Shenzhen Bay watershed were investigated through field sampling, experimental and statistical analysis, and the measures of microplastic reduction were discussed. The observation results exhibited a negative logarithmic correlation between the abundance of microplastics in river water and monthly rainfall (R = 0.994, MSE = 0.051, p < 0.05). When the monthly rainfall was <6 mm, the abundance of microplastics was absolutely dependent on point sources. While the rainfall exceeded 470 mm, the abundance was absolutely predominantly influenced by nonpoint source microplastics. The annual load of microplastics from the watershed was 5.39 × 1012 items, of which 61.6 % originated from point sources. Among the microplastics from point sources, 92.1 % were derived from fibers generated by textile washing. Fragmented microplastics (41.9 %) were the most common type of microplastics from nonpoint sources, primarily originating from the disintegration and weathering of disposable plastics. In the future, there is an expectation to reduce the microplastic load in the watershed to 15.9 % of the total by improving sewage treatment processes and infrastructure. This study can provide scientific guidance for environmental planning and serve as a warning regarding the impact of microplastics on ecosystems in urbanized areas.

Microplastic characterization and assessment of removal efficiency in an urban and industrial wastewater treatment plant with submarine emission discharge

Wastewater treatment plants (WWTPs) are significant contributors to microplastic (MP) pollution in marine ecosystems when they are inefficient. This study aimed to evaluate the effectiveness of microplastic removal from the effluent of the Anza WWTP (Morocco), which processes industrial and urban wastewater using a lamellar decantation system combined with a submarine emissary for treated water discharge. Additionally, this study investigated the presence of microplastics in the Atlantic seawater where treatment plant effluent is released. Microplastics were collected and extracted from wastewater and seawater samples to assess their abundance, shape, size, polymer type, and removal rates in the treatment plant. The findings revealed an average MP concentration of 1114 ± 90 MPs/L in the influent and 607 ± 101 MPs/L in the effluent, indicating a removal efficiency of 46 %. Seasonal analysis revealed the highest MP concentrations during the summer, with 2181.33 MPs/L in the influent and 1209 MPs/L in the effluent. Seawater samples from the discharge zone of the submarine emissary had an average MP concentration of 1600 MPs/m3. Characterization of the MPs revealed that fibers were the most common form of MPs in all the samples. The 500-100 μm size fraction was predominant in the WWTP samples, while MPs smaller than 1 mm were more abundant in the seawater samples. Seven polymer types were identified using attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR), with PET, PE, PVC, PA, PS, PP, and EVA being the most prevalent. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDX) revealed various degrees of weathering and chemical elements adhering to the MP surfaces. The results of this study provide valuable insights into the effectiveness of conventional treatment systems in removing microplastics and offer a reference for developing management strategies to mitigate MP pollution in Morocco's marine ecosystems.

Characteristics, drivers and ecological risk assessment of microplastics in the surface water of urban rivers in Guangdong-Hong Kong-Macao Greater Bay Area cities - A case study of Dongguan city

In the Guangdong-Hong Kong-Macao Greater Bay Area (GBA), microplastic pollution in urban rivers is a prominent problem due to the developed economy and high industrial intensity. Using the Xiaohai River, Hanxi River and Dongguan Canal in Dongguan City, an important node city in the GBA, as an example, microplastic characteristics, drivers and ecological risks in the surface water of three rivers were investigated. Results showed that the average abundance of rivers in the wet period (1646.22 ± 154.73 items/m3) was 4.7 times higher than that in the dry period (351.09 ± 34.2 items/m3). Microplastics were mainly in the form of fragments and fibers, with a size range of 30-500 μm, and appeared transparent with white color. The microplastic polymer types PE, PP, PET and PA accounted for more than 70%. There are large differences in the characteristics of microplastic pollution during different hydrological periods. Redundancy analysis showed that the distribution of plastics, chemical materials, packaging and printing industries along the rivers dominated the differences in microplastic abundance. The electronic information industry contributed most to the composition of microplastic polymer types. The polymer hazard index, pollution load index, and potential ecological risk index for rivers indicate a medium-high risk classification or higher. Therefore, the industrial layout along the urban rivers should be rationalized, the disposal of microplastics in wastewater should be increased, and the use of green plastic products should be promoted. This study provides support for the management of microplastic pollution in urban surface water in the GBA.

Synergetic sludge conditioning by US enhanced Fe2+ activated sodium persulfate: Physicochemical properties and mechanisms

Efficient dewatering of sewage sludge is an energy- and carbon-saving procedure for sludge treatment in wastewater treatment facilities. The ultrasound-coupled divalent iron ion activated persulfate process can effectively promote sludge dewatering and improve organic substance content. Under the action of ultrasound (US 50 w/L), divalent iron ions (Fe2+) 200 mg/g (TS), and persulfate (PDS) 200 mg/g (TS) for 60 min, the capillary suction time (CST) was reduced by 79.74%, and the moisture content of the dewatered sludge cake reached 56.51 wt%. The organic carbon content of treated sludge was also four times higher than the original sludge and types were richer in short-chain volatile species in US/Fe2+/PDS. Moreover, the correlation analysis found that the relationship of between CST and SV30, Zeta and lactate dehydrogenase (LDH) were positive correlation, and the relationship of SCOD and TC were positively correlated with the PN (SB-EPS). Mechanistic studies showed that the US/Fe2+/PDS system could produce oxygen activators by US coupling Fe2+ to strengthen the effect of activated PDS strongly, while the sulfate radicals (SO4·-) radical was a dominant role. The cracking mechanism is divided into two pathways effectively degraded the macromolecule EPS into a small-molecule acid and further reduced the water-holding interfacial affinity as follow: (1) the radical path dominated by hydroxyl radicals (·OH), SO4·-, and superoxide radical (O2·-); (2) the non-radicals dominated by monoclinic oxygen (1O2). Afterwards, the electrostatic force and interfacial free energy were reduced, resulting in enhanced self-flocculation and mobility to enhanced dewaterability. These findings demonstrated the US/Fe2+/PDS system had significant advantages in sludge cracking and provided theoretical support for its practical application.

Development and validation of an acid/alkaline digestion method for efficient microplastic extraction from wastewater treatment plant effluents: Sulfuric acid concentration and contact time do matter

Accurate analysis of microplastic particles (MPs) in environmental samples requires removal of interferences during sample preparation. Wastewater samples are interference-rich and thus particularly challenging, with concentrated sulfuric acid currently deemed impractical as a reagent. Therefore, this study aimed to establish a straightforward, effective, and safe method employing concentrated sulfuric acid and potassium hydroxide to eliminate interferents from effluent samples obtained from wastewater treatment plants (WWTPs). We found that 80 % sulfuric acid at room temperature with a brief contact time of 5 min was viable through a qualitative spot test involving 37 plastics categorized into three types (I, II, and III) based on their polymer structure's oxygen position. A quantitative assessment revealed that treatments involving H2SO4 and KOH (20 %, 24 h, 48 °C), either separately or in combination, had no discernible physical impact on the overall plastics, except for a subtle one for Type III plastics (e.g., nylon and PMMA) known to be labile under harsh pH conditions. This acid/alkaline digestion (AAD) method, incorporating such conditions for H2SO4 and KOH treatments, yielded a high mass removal efficacy (97.8 ± 2.4 %, n = 13) for eliminating natural particle interferents for primary, secondary, and tertiary effluent samples. Furthermore, the AAD method allowed for the determination of MPs in effluents with high surrogate particle recoveries (e.g., 95.1 % for larger than 500 μm size fraction). This method is readily adaptable to create appropriate protocols for different types of environmental matrices.

Comparison of three digestion methods for microplastic extraction from aquaculture feeds

Microplastics (MPs) are ubiquitous pollutants found in aquaculture animals that may threaten human health through the food chain. However, there is a lack of effective methods for extracting MPs from aquaculture feeds containing complex components such as organic matter and fish bones. Therefore, in the present study, the extraction efficiency of three digestion methods using 30 % H2O2, Fenton reagent, and 30 % H2O2 + HNO3 for different particle sizes and types of MPs in aquaculture feeds was investigated and compared. The total digestion efficiency of the aquaculture feeds by 30 % H2O2 was 97.3 ± 0.1 %, while the recovery efficiency of MPs was 91.3 ± 1.1 % -103.1 ± 0.9 %. However, there was a large deviation in the extraction efficiency of MPs from aquaculture feeds by the Fenton reagent and 30 % H2O2 + HNO3. Notably, the surface morphology, particle size distribution, and oxidation degree of MPs hardly changed after 30 % H2O2 digestion. More importantly, the changes in the spectral features and carbonyl index of MPs after 30 % H2O2 digestion were smaller than those of the Fenton reagent and 30 % H2O2 + HNO3, which did not affect the identification of MPs. Overall, 30 % H2O2 was more efficient in extracting MPs from aquaculture feeds, and no significant effect on the characteristics of MPs was observed. This work provides novel insights into the effect of chemical pretreatment on the extraction of MPs in aquaculture feeds and provides an optimal protocol for the detection of MPs in aquaculture feeds.