Solubility Advantage (and Disadvantage) of Pharmaceutical Amorphous Solid Dispersions

Amorphous Solubility Advantage: Theoretical Considerations, Experimental Methods, and Contemporary Relevance

Twenty-five years ago, Hancock and Parks asked a provocative question: "what is the true solubility advantage for amorphous pharmaceuticals?" Difficulties in determining the amorphous solubility have since been overcome due to significant advances in theoretical understanding and experimental methods. The amorphous solubility is now understood to be the concentration after the drug undergoes liquid-liquid or liquid-glass phase separation, forming a water-saturated drug-rich phase in metastable equilibrium with an aqueous phase containing molecularly dissolved drug. While crystalline solubility is an essential parameter impacting the absorption of crystalline drug formulations, amorphous solubility is a vital factor for considering absorption from supersaturating formulations. However, the amorphous solubility of drugs is complex, especially in the presence of formulation additives and gastrointestinal components, and concentration-based measurements may not indicate the maximum drug thermodynamic activity. This review discusses the concept of the amorphous solubility advantage, including a historical perspective, theoretical considerations, experimental methods for amorphous solubility measurement, and the contribution of supersaturation and amorphous solubility to drug absorption. Leveraging amorphous solubility and understanding the associated physicochemical principles can lead to more effective development strategies for poorly water-soluble drugs, ultimately benefiting therapeutic outcomes.

Development and evaluation of the in vitro schistosomicidal activity of solid dispersions based on 2-(-5-bromo-1-H-indole-3-yl-methylene)-N-(naphthalene-1-ylhydrazine-carbothiamide

Among all the neglected diseases, schistosomiasis is considered the second most important parasitic infection after malaria. Praziquantel is the most widely used drug for this disease, but its exclusive use may result in the development of drug-resistant schistosomiasis. To increase the control of the disease, new drugs have been developed as alternative treatments, among them 2-(-5-bromo-1-h-indole-3-yl-methylene)-N-(naphthalene-1-ylhydrazine-carbothiamide (LQIT/LT-50), which showed promising schistosomicidal activity in nonclinical studies. However, LQIT/LT-50 presents low solubility in water, resulting in reduced bioavailability. To overcome this solubility problem, the present study aimed to develop LQIT/LT-50 solid dispersions for the treatment of schistosomiasis. Solid dispersions were prepared through the solvent method using Soluplus©, polyethylene glycol (PEG) or polyvinylpyrrolidone (PVP K-30) as hydrophilic carriers. The formulations with the best results in the compatibility tests, aqueous solubility and preliminary stability studies have undergone solubility tests and physicochemical characterizations by Fourier-transform infrared spectroscopy (FTIR), x-ray diffractometry (XRD), exploratory differential calorimetry (DSC), thermogravimetry (TG) and Raman spectroscopy. Finally, the schistosomicidal activity was evaluated in vitro. The phycochemical analyzes showed that when using PVP K-30, there was an interaction between the PVP K-30 and LQIT/LT-50, proving the successful development of the solid dispersion. Furthermore, an increase in the solubility of the new system was observed (LQIT/LT-50:PVP K-30) in addition to the improvement in the in vitro shistosomidal activity at 1:4 (w/w) molar ratio (i.e., 20% drug loading) when compared to LQIT/LT-50 alone. The development of the LQIT/LT-50:PVP K-30 1:4 solid dispersion is encouraging for the future development of new pharmaceutical solid formulations, aiming the schistosomicidal treatment.

Impact of Gastric pH Variations on the Release of Amorphous Solid Dispersion Formulations Containing a Weakly Basic Drug and Enteric Polymers

Enteric polymers are widely used in amorphous solid dispersion (ASD) formulations. The aim of the current study was to explore ASD failure mechanisms across a wide range of pH conditions that mimic in vivo gastric compartment variations where enteric polymers such as hydroxypropyl methylcellulose phthalate (HPMCP) and hydroxypropyl methylcellulose acetate succinate (HPMCAS) are largely insoluble. Delamanid (DLM), a weakly basic drug used to treat tuberculosis, was selected as the model compound. Both DLM free base and the edisylate salt were formulated with HPMCP, while DLM edisylate ASDs were also prepared with different grades of HPMCAS. Two-stage release testing was conducted with the gastric stage pH varied between pH 1.6 and 5.0, prior to transfer to intestinal conditions of pH 6.5. ASD particles were collected following suspension in the gastric compartment and evaluated using X-ray powder diffraction and scanning electron microscopy. Additional samples were also evaluated with polarized light microscopy. In general, ASDs with HPMCP showed improved overall release for all testing conditions, relative to ASDs with HPMCAS. ASDs with the edisylate salt likewise outperformed those with DLM free base. Impaired release for certain formulations at intestinal pH conditions was attributed to surface drug crystallization that initiated during suspension in the gastric compartment where the polymer is insoluble; crystallization appeared more extensive for HPMCAS ASDs. These findings suggest that gastric pH variations should be evaluated for ASD formulations containing weakly basic drugs and enteric polymers.

Carvedilol Precipitation Inhibition by the Incorporation of Polymeric Precipitation Inhibitors Using a Stable Amorphous Solid Dispersion Approach: Formulation, Characterization, and In Vitro In Vivo Evaluation

An amorphous solid dispersion (ASD) of carvedilol (CVL) was prepared via the solvent evaporation method, using cellulose derivatives as polymeric precipitation inhibitors (PPIs). The prepared ASDs existed in the amorphous phase, as revealed by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM). The Fourier-transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) results confirmed the compatibility between CVL and the polymers used. The ASDs characteristics were evaluated, with no change in viscosity, a pH of 6.8, a polydispersity index of 0.169, a particle size of 423-450 nm, and a zeta potential of 3.80 mV. Crystal growth inhibition was assessed for 180 min via an infusion precipitation study in simulated intestinal fluid (SIF). The interactions between the drug and polymers were established in great detail, using nuclear magnetic resonance (NMR) spectroscopy, nuclear Overhauser effect spectroscopy (NOESY), and Raman spectroscopy studies. Dielectric analysis was employed to determine the drug-polymer interactions between ion pairs and to understand ion transport behavior. In vivo oral kinetics and irritation studies performed on Wistar rats have demonstrated promising biocompatibility, stability, and the enhanced bioavailability of CVL. Collectively, the stable ASDs of CVL were developed using cellulose polymers as PPIs that would inhibit drug precipitation in the gastrointestinal tract and would aid in achieving higher in vivo drug stability and bioavailability.

Predicting in vivo performance of fenofibrate amorphous solid dispersions using in vitro non-sink dissolution and dissolution permeation setup

Amorphous solid dispersion (ASD) is emerging as a useful formulation strategy to increase the bioavailability of active pharmaceutical ingredients with poor solubility. In vitro dissolution testing under non-sink conditions has often been used to evaluate the ability of ASDs to generate and maintain supersaturation to predict the in vivo performance. However, such a single compartment dissolution setup can fail to predict the oral bioavailability, due to an interdependence between precipitation and permeation. Hence, the use of two compartment dissolution-permeation setups is emerging. In this study, three ASDs containing fenofibrate as model drug substance were developed using Soluplus®, and Hypromellose Acetate Succinate in two different grades (high and low), respectively. The aim was to compare the use of a small-scale in vitro non-sink dissolution setup and a small-scale in vitro dissolution-permeation setup to predict the in vivo oral exposure of the ASDs in rats. The maximum concentration (C_max) and area under curve (AUC) obtained in the in vitro studies were used to predict the in vivo rank order of the formulations. The results showed that the two in vitro studies resulted in the same rank order based on both C_max and AUC. Interestingly, C_max resulted in a better in vitro/in vivo correlation than the in vitro AUC, and based on the in vitro C_max, the in vivo rank order was predicted.

Increase in Dissolution Rate of Zotepine via Nanomilling Process - Impact of Dried Nanocrystalline Suspensions on Bioavailability

Zotepine is an atypical antipsychotic drug used in the treatment of schizophrenia. However, its poor dissolution properties limit its therapeutic efficacy. In this investigation, a series of nanosuspension-containing zotepine were prepared employing media milling method with an aim to improve its dissolution properties and oral bioavailability. Briefly, Box-Behnken design was applied to investigate the influence of various independent variables such as X₁- amount of stabilizer, X₂- amount of milling agent, and X₃- milling time on the performance of the formulation. Dissolution studies revealed enhancement of dissolution rate as compared to pure drug. Solid state characterization (DSC, PXRD, and SEM) studies demonstrated no polymorphic changes in drug after lyophilization of media-milled nanosuspension. In vivo pharmacokinetic studies of lyophilized nanosuspension was carried out in rat and the results exhibited significant improvement in C_max and AUC_0-t, about 450.0 and 287.45%, respectively, suggesting amelioration in oral bioavailability by 2.87-fold higher as compared to pure drug. Accelerated stability studies of the optimized lyophilized formulation at 40°C and 75% RH suggested stability of the nanocrystals for at least a 6-month period. The obtained nanocrystals successfully showed dissolution enhancement and improved oral bioavailability of poorly water-soluble drug, zotepine.

pH-Dependent supersaturation from amorphous solid dispersions of weakly basic drugs

PURPOSE

In amorphous solid dispersions (ASDs), the chemical potential of a drug can be reduced due to mixing with the polymer in the solid matrix, and this can lead to reduced drug release when the polymer is insoluble in the dissolution media. If both the drug and the polymer composing an ASD are ionizable, drug release from the ASD becomes pH-dependent. The goal of this study was to gain insights into the pH-dependent solubility suppression from ASD formulations.

METHODS

The maximum release of clotrimazole, a weakly basic drug, from ASDs formulated with insoluble and pH-responsive polymers, was determined as a function of solution pH. Drug-polymer interactions in ASDs were probed using melting point depression, moisture sorption, and solid-state Nuclear Magnetic Resonance spectroscopy (SSNMR) measurements.

RESULTS

The extent of solubility suppression was dependent on polymer type and drug loading. The strength of drug-polymer interactions was found to correlate well with the degree of solubility suppression. For the same ASD, the degree of solubility suppression was nearly constant across the solution pH range studied, suggesting that polymer-drug interactions in residual ASD solids was independent of solution pH. The total drug release agrees with the Henderson-Hasselbalch relationship if the suppressed amorphous solubility of the free drug is independent of solution pH.

CONCLUSIONS

The mechanism of solubility suppression at different solution pHs appeared to be drug-polymer interactions in the solid-state, where the concentration of the free drug remains the same at variable pHs and the total drug concentration follows the Henderson-Hasselbalch relationship.

Impact of Simulated Intestinal Fluids on Dissolution, Solution Chemistry, and Membrane Transport of Amorphous Multidrug Formulations

The solution behavior and membrane transport of multidrug formulations were herein investigated in a biorelevant medium simulating fasted conditions. Amorphous multidrug formulations were prepared by the solvent evaporation method. Combinations of atazanavir (ATV) and ritonavir (RTV) and felodipine (FDN) and indapamide (IPM) were prepared and stabilized by a polymer for studying their dissolution (under non-sink conditions) and membrane transport in fasted state simulated intestinal fluid (FaSSIF). The micellar solubilization by FaSSIF enhanced the amorphous solubility of the drugs to different extents. Similar to buffer, the maximum achievable concentration of drugs in combination was reduced in FaSSIF, but the extent of reduction was affected by the degree of FaSSIF solubilization. Dissolution studies of ATV and IPM revealed that the amorphous solubility of these two drugs was not affected by FaSSIF solubilization. In contrast, RTV was significantly affected by FaSSIF solubilization with a 30% reduction in the maximum achievable concentration upon combination to ATV, compared to 50% reduction in buffer. This positive deviation by FaSSIF solubilization was not reflected in the mass transport–time profiles. Interestingly, FDN concentrations remain constant until the amount of IPM added was over 1000 μg/mL. No decrease in the membrane transport of FDN was observed for a 1:1 M ratio of FDN-IPM combination. This study demonstrates the importance of studying amorphous multidrug formulations under physiologically relevant conditions to obtain insights into the performance of these formulations after oral administration.

Polyelectrolyte Matrices in the Modulation of Intermolecular Electrostatic Interactions for Amorphous Solid Dispersions: A Comprehensive Review

Polyelectrolyte polymers have been widely used in the pharmaceutical field as excipients to facilitate various drug delivery systems. Polyelectrolytes have been used to modulate the electrostatic environment and enhance favorable interactions between the drug and the polymer in amorphous solid dispersions (ASDs) prepared mainly by hot-melt extrusion. Polyelectrolytes have been used alone, or in combination with nonionic polymers as interpolyelectrolyte complexes, or after the addition of small molecular additives. They were found to enhance physical stability by favoring stabilizing intermolecular interactions, as well as to exert an antiplasticizing effect. Moreover, they not only enhance drug dissolution, but they have also been used for maintaining supersaturation, especially in the case of weakly basic drugs that tend to precipitate in the intestine. Additional uses include controlled and/or targeted drug release with enhanced physical stability and ease of preparation via novel continuous processes. Polyelectrolyte matrices, used along with scalable manufacturing methods in accordance with green chemistry principles, emerge as an attractive viable alternative for the preparation of ASDs with improved physical stability and biopharmaceutic performance.

EFFECT OF SOLID DISPERSIONS ON THE SOLUBILITY OF METRONIDAZOLE

The aim of the work is to study the effect of solid dispersions using polyethylene glycols of various molecular weights on the solubility of metronidazole in water. Metronidazole is an antimicrobial and antiprotozoal drug. Its low solubility in water limits the use of metronidazole, causing technological difficulties and reducing its bioavailability. The solubility and release of the active substance from dosage forms can be increased using the solid dispersion methods. Solid dispersions are bi- or multicomponent systems consisting of an active substance and a carrier (a highly dispersed solid phase of the active substance or molecular-dispersed solid solutions) with a partial formation of complexes of variable compositions with the carrier material.

Materials and methods. The substance of metronidazole used in the experiment, was manufactured by Hubei Hongyuan Pharmaceutical Technology Co., Ltd. (China). To obtain solid dispersions, polyethylene glycols of various molar masses – 1500, 2000 and 3000 g/mol – were used. The solid dispersions were prepared by “the solvent removal method”: metronidazole and the polymer were dissolved in a minimum volume of 96% ethyl alcohol (puriss. p.a./analytical grade) at 65±2°C, and then the solvent was evaporated under vacuum to the constant weight. A vacuum pump and a water bath were used at the temperature of 40±2°C. The dissolution of the samples was studied using a magnetic stirrer with heating, and a thermostatting device. The concentration of metronidazole was determined on a spectrophotometer using quartz cuvettes at the wavelength of 318±2 nm. To filter the solutions, syringe nozzles were used, the pores were 0.45 μm, the filter was nylon. Microcrystalloscopy was performed using a microscope with a digital camera. The optical properties of the solutions were investigated using a quartz cuvette and a mirror camera (the image exposure – 20 sec).

Results. Obtaining solid dispersions increases the completeness and rate of the metronidazole dissolution. The solubility of metronidazole from solid dispersions increases by 14–17% in comparison with the original substance. The complex of physical-chemical methods of the analysis, including UV spectrophotometry, microcrystalloscopy and the study of the optical properties of the obtained solutions, makes it possible to suggest the following. The increase in the solubility of metronidazole from solid dispersions is explained by the loss of crystallinity and the formation of a solid solution of the active substance and the solubilizing effect of the polymer with the formation of colloidal solutions of metronidazole at subsequent dissolution of the solid dispersion in water.

Conclusion. The preparation of solid dispersions with polyethylene glycols improves the dissolution of metronidazole in water. The results obtained are planned to be used in the development of rapidly dissolving solid dosage forms of metronidazole with an accelerated release and an increased bioavailability.

Selective Laser Sintering (SLS), a New Chapter in the Production of Solid Oral Forms (SOFs) by 3D Printing

3D printing is a new emerging technology in the pharmaceutical manufacturing landscape. Its potential advantages for personalized medicine have been widely explored and commented on in the literature over recent years. More recently, the selective laser sintering (SLS) technique has been investigated for oral drug-delivery applications. Thus, this article reviews the work that has been conducted on SLS 3D printing for the preparation of solid oral forms (SOFs) from 2017 to 2020 and discusses the opportunities and challenges for this state-of-the-art technology in precision medicine. Overall, the 14 research articles reviewed report the use of SLS printers equipped with a blue diode laser (445-450 nm). The review highlights that the printability of pharmaceutical materials, although an important aspect for understanding the sintering process has only been properly explored in one article. The modulation of the porosity of printed materials appears to be the most interesting outcome of this technology for pharmaceutical applications. Generally, SLS shows great potential to improve compliance within fragile populations. The inclusion of "Quality by Design" tools in studies could facilitate the deployment of SLS in clinical practice, particularly where Good Manufacturing Practices (GMPs) for 3D-printing processes do not currently exist. Nevertheless, drug stability and powder recycling remain particularly challenging in SLS. These hurdles could be overcome by collaboration between pharmaceutical industries and compounding pharmacies.

Amorphous Drug Solubility and Maximum Free Drug Concentrations in Cyclodextrin Solutions: A Quantitative Study Using NMR Diffusometry

Cyclodextrin (CD) has been widely used as a solubilizing agent for poorly water-soluble drugs. In the present study, the effect of CD on the amorphous drug solubility and the maximum thermodynamic activity of the drug in the aqueous phase when the drug concentration exceeded the liquid-liquid phase separation (LLPS) concentration was investigated using three chemically diverse CDs, β-cyclodextrin (β-CD), dimethyl-β-CD (DM-β-CD), and hydroxypropyl-β-CD (HP-β-CD). The amorphous solubility of ibuprofen (IBP) increased substantially linearly with the increase in the CD concentration due to IBP/CD complex formation. Surprisingly, although the crystalline solubility of IBP in the β-CD solution reached a plateau at β-CD concentrations above 3 mM (B_S-type solubility diagram) because of the limited crystalline solubility of the IBP/β-CD complex, the amorphous solubility of IBP increased linearly even when the β-CD concentration was higher than 3 mM. The amorphous solubility of IBP in CD solutions was influenced primarily by the phase separation of the IBP-supersaturated solution to the aqueous phase and the other phase mainly composed of IBP, namely, the IBP-rich phase, via LLPS. NMR spectroscopy revealed that DM-β-CD was distributed into the IBP-rich phase when the IBP concentration exceeded its amorphous solubility, while β-CD and HP-β-CD showed minimal mixing with the IBP-rich phase. NMR diffusometry showed that the maximum free IBP concentration was reduced in the DM-β-CD solution compared to that in the buffer. The mixing of DM-β-CD with the IBP-rich phase reduced the chemical potential of IBP in the IBP-rich phase, which in turn reduced the maximum thermodynamic activity of IBP in the aqueous phase. In contrast, the maximum free IBP concentration was unchanged when β-CD or HP-β-CD was present. The hydrophobic nature of the DM-β-CD substituent may contribute to its partitioning into the IBP-rich phase. The present study highlights the impact of CD on the maximum thermodynamic activity of drugs as well as the apparent amorphous solubility of the drug. This aspect should be considered for improving the effective absorption of poorly water-soluble drugs.

Synergistic application of twin-screw granulation and selective laser sintering 3D printing for the development of pharmaceutical dosage forms with enhanced dissolution rates and physical properties

This study demonstrated the first case of combining a novel continuous granulation technique with powder-bed fusion-based selective laser sintering (SLS) process to enhance the dissolution rate and physical properties of a poorly water-soluble drug. Selective laser sintering and binder jetting 3D printing processes have gained much attention in pharmaceutical dosage form manufacturing in recent times. These powder bed-based 3D printing platforms have been known to face printing and uniformity problems due to the inherent poor flow properties of the pharmaceutical physical mixtures. To address this issue a hot-melt extrusion-based versatile granulation process equipped with a process analytical technology (PAT) tool for the in-line monitoring of critical quality attributes (i.e., solid-state) of indomethacin was developed. The collected granules with enhanced flow properties were mixed with Kollidon® VA64 and a conductive excipient for efficient sintering. These mixtures were further characterized for their bulk properties observing an excellent flow and later subjected to an SLS-3D printing process. The physical mixtures, processed granules, and printed tablets were characterized using conventional as well as advanced solid-state characterizations. These characterizations revealed the amorphous nature of the drug in the processed granules and printed tablets. Further, the in vitro release testing of the tablets with produced granules as a reference standard depicted a notable dissolution advantage (100% drug released in 5 min at >pH 6.8) over the pure drug and the physical mixture. Our developed system known as DosePlus combines innovative continuous granulation and SLS-3D printing process which can potentially improve the physical properties of the bulk drug and formulations in comparison to when used in isolation. This process can further find application in continuous manufacturing of granules and additive manufacturing of pharmaceuticals to produce dosage forms with excellent uniformity and solubility advantage.

Insights into co-amorphous systems in therapeutic drug delivery

Co-amorphous (CAM) systems are promising drug-delivery systems in the arena of therapeutic drug delivery, addressing the poor aqueous solubility of drugs by enhancing solubility and thereby improving the oral bioavailability and therapeutic effect of the drug. A CAM system is a single-phase homogeneous blend of two or more low molecular weight molecules that can be drug–drug or drug–co-former, stabilized via intermolecular interactions, adding the benefit of thermodynamic stability. This review covers the fundamentals of CAM systems and recent advances in formulation development. In particular, we strive to address the theoretical, molecular, technical and biopharmaceutical aspects, advantages over polymeric amorphous solid dispersions, mechanisms of stabilization of amorphous forms, insights into unexplored in silico tools in excipient selection and regulatory viewpoints.

Effect of Polymer Species on Maximum Aqueous Phase Supersaturation Revealed by Quantitative Nuclear Magnetic Resonance Spectroscopy

The polymer used in an amorphous solid dispersion (ASD) formulation impacts the maximum achievable drug supersaturation. Herein, the effect of dissolved polymer on drug concentration in the aqueous phase when a drug-rich phase was generated by liquid-liquid phase separation (LLPS) was investigated for different polymers at various concentrations of drug and polymer. Solution nuclear magnetic resonance (NMR) spectroscopy revealed that polyvinylpyrrolidone (PVP), polyvinylpyrrolidone/vinyl acetate (PVP-VA), and hypromellose (HPMC) distributed into the ibuprofen (IBP)-rich phase formed by LLPS when the amorphous solubility of IBP was exceeded. The amount of polymer in the drug-rich phase increased for higher-molecular-weight grades of PVP and HPMC. Moreover, PVP-VA showed a greater extent of distribution into the IBP-rich phase compared to PVP, and this is attributed to its reduced hydrophilicity resulting from the incorporation of vinyl acetate monomers. Direct quantification by NMR measurements indicated that the IBP concentration in the aqueous phase decreased as the amount of polymer in the IBP-rich phase increased. This can be attributed to a reduction of the chemical potential of IBP in the IBP-rich phase. The reduction in dissolved IBP concentration was greater for the IBP/PVP-VA system compared to the IBP/HPMC system, as a result of more extensive drug-polymer interactions in the former system. The present study highlights the impact of polymer selection on the attainable supersaturation of the drug and the factors that need to be considered in the formulation of ASDs to obtain optimized in vivo performance.

A critical review of spray-dried amorphous pharmaceuticals: Synthesis, analysis and application

New drugs are frequently found with poor water-solubility in recent pharmaceutical projects, which brings difficulties of bioavailability for the clinical development of new drugs. When these drug compounds in a crystalline state are absorbed by gastrointestinal tract, their dissolution rates and absorption rates are very limited. Nowadays, various methods have been developed to improve the solubility, dissolution and bioavailability of drugs. According to the characteristics of drugs, this work suggests the use of spray drying technology to amorphize APIs (active pharmaceutical ingredients) to improve their bioavailability. This work reviews the properties of the spray-dried amorphous drugs, the progress made in drug synthesis and application, and the existing problems.

Selective Laser Sintering 3-Dimensional Printing as a Single Step Process to Prepare Amorphous Solid Dispersion Dosage Forms for Improved Solubility and Dissolution Rate

This study reports the development of ritonavir-copovidone amorphous solid dispersions (ASDs) and dosage forms thereof using selective laser sintering (SLS) 3-dimensional (3-D) printing in a single step, circumventing the post-processing steps required in common techniques employed to make ASDs. For this study, different drug loads of ritonavir with copovidone were processed at varying processing conditions to understand the impact, range, and correlation of these parameters for successful ASD formation. Further, ASDs characterized using conventional and advanced solid-state techniques including wide-angle X-ray scattering (WAXS), solid-state nuclear magnetic resonance (ssNMR), revealed the full conversion of the crystalline drug to its amorphous form as a function of laser-assisted selective fusion in a layer-by-layer manner. It was observed that an optimum combination of the powder flow properties, surface temperature, chamber temperature, laser speed, and hatch spacing was crucial for successful ASD formation, any deviations resulted in print failures or only partial amorphous conversion. Moreover, a 21-fold increase in solubility was demonstrated by the SLS 3-D printed tablets. The results confirmed that SLS 3-D printing can be used as a single-step platform for creating ASD-based pharmaceutical dosage forms with a solubility advantage.

Role of Polymer Excipients in the Kinetic Stabilization of Drug-Rich Nanoparticles

Amorphous solid dispersions (ASDs) of crystallizable drugs and polymer excipients are attractive for enhancing the solubility and bioavailability of hydrophobic drug molecules. In this study, the solution behavior of poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) (PND) and poly(vinylpyrrolidone-co-vinylacetate) (PVPVA), as polymer excipients, and nilutamide (NLT), phenytoin (PHY), and itraconazole (ITN) as model drugs, were monitored by an in vitro dissolution assay, small-angle X-ray scattering (SAXS), dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryo-TEM), and polarized optical microscopy (POM). High degrees of drug supersaturation were coincident with the formation of amorphous nanoparticles in each system. The difference in particle size and kinetic stability between PND and PVPVA systems suggest a difference in how the polymers interact with the drug-rich phase. A series of scenarios are proposed based on whether the polymer interacts more strongly with the drug-rich nanoparticles or with water. Understanding the contribution of drug-rich nanoparticles to achievable supersaturation and the effect of polymer excipients on these particles will inform the design of future solid dispersion systems through a better understanding of the polymer/drug solution relationship.

Insights into Dissolution and Solution Chemistry of Multidrug Formulations of Antihypertensive Drugs

Using fixed dose combinations of drugs instead of administering drugs separately can be beneficial for both patients and the health care system, but the current understanding of how multidrug formulations work at the molecular level is still in its infancy. Here, we explore dissolution, solubility, and supersaturation of various drug combinations in amorphous formulations. The effect of chemical structural similarity on combination behavior was investigated by using structurally related compounds of both drugs. The effect of polymer type on solution behavior was also evaluated using chemically diverse polymers. Indapamide (IPM) concentration decreased when combined with felodipine (FDN) or its analogues, which occurred even when the IPM solution was undersaturated. The extent of solubility decrease of FDN was less than that of IPM from the dissolution of an equimolar formulation of the drugs. No significant solubility decrease was observed for FDN at low contents of IPM which was also observed for other dihydropyridines, whereas FDN decreases at high contents of IPM. This was explained by the complex nature of the colloidal precipitates of the combinations which impacts the chemical potential of the drugs in solution at different levels. The maximum achievable concentration of FDN and IPM during dissolution of the polyvinylpyrrolidone-based amorphous solid dispersion was higher than the value measured with the hydroxypropyl methylcellulose acetate succinate-based formulation. This emphasizes the significance of molecular properties and chemical diversity of drugs and polymers on solution chemistry and solubility profiles. These findings may apply to drugs administered as a single dosage form or in separate dosage forms and hence need to be well controlled to assure effective treatments and patient safety.

Amorphous solid dispersion dry powder for pulmonary drug delivery: Advantages and challenges

Amorphous solid dispersion (ASD) is commonly used in pharmaceutical industry. It has been mainly employed to enhance the oral bioavailability of poorly water-soluble drugs that belong to class II and IV of the biopharmaceutical classification system but has showed promise in other areas of pharmaceutical research. In this review, the potential and limitations of ASD dry powder for inhalation are discussed. ASD powder for inhalation (ASD-IP) is commonly prepared by spray drying technique. The physicochemical characteristics of ASD-IP could be tailored to achieve effective lung deposition. ASD-IP could also attain rapid dissolution behavior to achieve therapeutically effective concentration either locally or systemically before particle clearance in the lung. The key challenges of using ASD powder for inhalation include the possible chemical and/or physical instability of the amorphous phase during manufacturing and in vivo, and the moisture and temperature sensitivity of ASD-IP that affects its storage stability.

Twin-screw melt granulation: Current progress and challenges

Twin-screw melt granulation (TSMG) is a new alternative method for granulation that offers several advantages over wet and dry granulation methods. TSMG has rapidly gained interest over recent years in the pharmaceutical industry. Since it is an inherently continuous process with controlled temperature and shear history, TSMG produces products with more consistent quality than the batch process. Several studies have investigated how various formulation and processing parameters influence granulation behavior and granule properties; however, there are still challenges that require a better mechanistic understanding. This review summarizes the current progress of TSMG while highlighting how various formulation and process parameters affect the physicochemical properties of granules. The challenges related to the process-induced physicochemical changes of drug substances are also discussed.

Evaluation of Mogroside V as a Promising Carrier in Drug Delivery: Improving the Bioavailability and Liver Distribution of Silybin

The objective of this work was to investigate the capacity of mogroside V (MOG-V), a food additive, as a novel carrier to improve the bioavailability and liver distribution of silybin (SLY). Solid dispersion particles (SDPs) of SLY/MOG-V were prepared utilizing the solvent evaporation method. The physicochemical characterizations of SDPs were evaluated by using dynamic light scattering (DLS), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD) measurements. DLS results demonstrated the formation of nanoparticles (206 nm) of SDPs in water. DSC and PXRD analysis revealed that SLY was in amorphous form or molecularly dispersed in SDPs. SDPs also exhibited a major increase in both dissolution rate and saturation solubility, as evidenced by a 1931-fold improvement (2201 μg/mL) in solubility compared with pure SLY (1.14 μg/mL). The pharmacokinetic study in rats showed that oral absorption of SLY/MOG-V SDPs was dramatically increased. The mean value of AUC until 12 h for SLY/MOG-V SDPs (27,481 ng·min/mL) was 24.5-fold higher than that of pure SLY (1122 ng·min/mL). In vivo tissue distribution experiment in mice confirmed that the major distribution tissue was changed from lungs to liver after SLY was loaded into MOG-V. In addition, even orally administrated to mice at a high dose (4.2 g/kg), MOG-V exhibited no undesirable effect on the plasma glucose concentrations. Thus, MOG-V may have the applicability to serve as an ideal excipient for solubilization or as a novel liver targeting carrier for the delivery of SLY.

Micro-scale solubility assessments and prediction models for active pharmaceutical ingredients in polymeric matrices

The number of models for assessing the solubility of active pharmaceutical ingredients (APIs) in polymeric matrices on the one hand and the extent of available associated data on the other hand has been rising steadily in the past few years. However, according to our knowledge an overview on the methods used for prediction and the respective experimental data is missing. Therefore, we compiled experimental data, the techniques used for their determination and the models used for estimating the solubility. Our focus was on polymers commonly used in spray drying and hot-melt extrusion to form amorphous solid dispersions (ASDs), namely polyvinylpyrrolidone grades (PVP), polyvinyl acetate (PVAc), vinylpyrrolidone-vinyl acetate copolymer (copovidone, COP), polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft polymer (Soluplus®, SOL), different types of methacrylate copolymers (PMMA), polyethylene glycol grades (PEG) and hydroxypropyl-methylcellulose grades (HPMC). The literature data were further supplemented by our own results. The final data set included 37 APIs and two sugar derivatives. The majority of the prediction models was constituted by the melting point depression method, dissolution endpoint measurements, indirect solubility determination by T_g and the use of low molecular weight analogues. We observed that the API solubility depended more on the working group which conducted the experiments than on the measuring technique used. Furthermore, this compilation should assist researchers in choosing a prediction method suited for their investigations. Furthermore, a statistical assessment using recursive feature elimination was performed to identify descriptors of molecules, which are connected to the API solubility in polymeric matrices. It is capable of predicting the criterium 20% API soluble at 100 °C (Yes/No) for an unknown compound with a balanced accuracy of 71%. The identified 8 descriptors to be connected to API solubility in polymeric matrices were the number of hydrogen bonding donors, three descriptors related to the hydrophobicity of the molecule, glass transition temperature, fractional negative polar van der Waals surface area, out-of-plane potential energy and the fraction of rotatable bonds. Finally, in addition to our own model, the data set should help researchers in training their own solubility prediction models.

Influence of mechanical and thermal energy on nifedipine amorphous solid dispersions prepared by hot melt extrusion: Preparation and physical stability

Hot melt extrusion (HME) has been used to prepare solid dispersions, especially molecularly dispersed amorphous solid dispersions (ASDs) for solubility enhancement purposes. The energy generated by the extruder in the form of mechanical and thermal output enables the dispersion and dissolution of crystalline drugs in polymeric carriers. However, the impact of this thermal and mechanical energy on ASD systems remains unclear. We selected a model ASD system containing nifedipine (NIF) and polyvinylpyrrolidone vinyl acetate (PVP/VA 64) to investigate how different types of energy input affect the preparation and physical stability of ASDs. Formulations were prepared using a Leistritz Nano-16 extruder, and we varied the screw design, barrel temperature, screw speed, and feed rate to control the mechanical and thermal energy input. Specific mechanical energy (SME) was calculated to quantitate the mechanical energy input, and the thermal energy was estimated using barrel temperature. We find that both mechanical and thermal energy inputs affect the conversion of crystalline NIF into an amorphous form, and they also affect the level of mixing and the degree of homogeneity in NIF ASDs. However, for small size extruders (e.g., Leistritz Nano-16), thermal energy is more efficient than mechanical energy in preparing NIF ASDs that have better stability.

Developments in Taste-Masking Techniques for Traditional Chinese Medicines

A variety of pharmacologically active substances, including chemotherapeutic drugs and the substances from traditional Chinese medicine (TCM), always exhibit potent bioactivities after oral administration. However, their unpleasant taste (such as bitterness) and/or odor always decrease patient compliance and thus compromise their curative efficacies in clinical application. Therefore, the developments of taste-masking techniques are of great significance in improving their organoleptic properties. However, though a variety of taste-masking techniques have been successfully used to mask the unpalatable taste of chemotherapeutic drugs, their suitability for TCM substances is relatively limited. This is mainly due to the fact that the bitter ingredients existing in multicomponent TCM systems (i.e., effective fractions, single Chinese herbs, and compound preparations) are always unclear, and thus, there is lack of tailor-made taste-masking techniques to be utilized to conceal their unpleasant taste. The relevant studies are also relatively limited. As a whole, three types of taste-masking techniques are generally applied to TCM, including (i) functional masking via sweeteners, bitter blockers, and taste modifiers; (ii) physical masking via polymer film-coating or lipid barrier systems; and (iii) biochemical masking via intermolecular interaction, β-cyclodextrin inclusion, or ion-exchange resins. This review fully summarizes the results reported in this field with the purpose of providing an informative reference for relevant readers.

Fast Dissolving of Ferulic Acid via Electrospun Ternary Amorphous Composites Produced by a Coaxial Process

Enhancing the dissolution of insoluble active ingredients comprises one of the most important issues in the pharmaceutical and biomaterial fields. Here, a third generation solid dispersion (3rd SD) of ferulic acid was designed and fabricated by a modified coaxial electrospinning process. A traditional second generation SD (2nd SD) was also prepared by common one-fluid blending electrospinning and was used as a control. With poly(vinyl alcohol) as the fiber matrix and polyvinylpyrrolidone K10 as an additive in the 3rd SDs, the two electrospinning processes were investigated. The prepared 2nd and 3rd SDs were subjected to a series of characterizations, including X-ray diffraction (XRD), scanning electron microscope (SEM), hydrophilicity and in vitro drug dissolving experiments. The results demonstrate that both SDs were monolithic nanocomposites and that the drugs were amorphously distributed within the matrix. However, the 3rd SDs had better morphology with smaller size, narrower size distribution, and smaller water contact angles than the 2nd SDs. Dissolution tests verified that the 3rd SDs could release their loaded cargoes within 60 s, which was over three times faster than the 2nd SDs. Therefore, a combined strategy based on the modified coaxial electrospinning and the logical selections of drug carriers is demonstrated for creating advanced biomaterials.

Effects of Dendrimer-Like Biopolymers on Physical Stability of Amorphous Solid Dispersions and Drug Permeability Across Caco-2 Cell Monolayers

The potential applications of dendrimer-like biopolymers (DLB) as stabilizing excipients for amorphous solid dispersion (ASD) of niclosamide, celecoxib, and resveratrol were evaluated based on (1) the formation and physical stability of the ASD and (2) the permeability and flux of the agents across Caco-2 cell monolayers. The evaluation was made by comparing the performance of prototype phytoglycogen derivatives (DLB1, DLB2, and DLB3) with commonly used polymers such as HPMCAS, PVPVA, and Soluplus®. PXRD was used to confirm the formation of the dispersions and detect crystallinity peaks formed during 2- and 4-week storage at 40°C/75% RH. At concentrations below 2 g/mL, the viability of Caco-2 cells remained above 80% for all DLB samples compared to untreated cells in the MTT assay. Permeability studies revealed a repeating pattern in which an increase in the initial concentration (C₀) was associated with a concomitant decrease in the apparent permeability (P_app) which we theorize is due to differences in drug-polymer interactions. Niclosamide-DLB1 dispersion had the lowest flux due to a significant reduction in P_app. The high increase in the C₀ of celecoxib-DLB2, however, made up for the reduction in the P_app and produced the highest flux values compared to other polymers. Resveratrol-DLB3 had a 5× reduction in P_app, but C₀ increased from 25.8 to 176 μg/mL led to a higher flux compared to the crystalline drug without polymer. Collectively, these results provide a "proof-of-concept" basis to demonstrate that DLB excipients have the ability to increase apparent solubility (Sol_app), most likely due to drug-binding capacity.

Tailoring supersaturation from amorphous solid dispersions

The maximum achievable concentration of a drug in solution is dictated by the chemical potential of the solid form. Because an amorphous solid has a higher chemical potential than the corresponding crystal form, in the absence of phase transformations, a higher transient solubility is expected. However, the chemical potential of an amorphous drug can be reduced by mixing with another component. Therefore, upon mixing with a polymer to form an amorphous solid dispersion (ASD), the maximum solution concentration achieved can be potentially altered, in particular if the polymer is poorly soluble in the dissolution medium. Such changes in the chemical potential of the drug may be a critical factor in determining the maximum achievable solution concentration, and could alter the crystallization driving force of the drug. Therefore, the aim of this study was to gain insights into the impact of poorly soluble polymers on the "amorphous solubility" of drugs formulated as amorphous solid dispersions. Lopinavir was selected as a model drug with a low crystallization tendency, enabling determination of the amorphous solubility as a function of ASD composition. Model polymers included cellulose acetate (CA), CA phthalate (CAP), ethylcellulose (EC), Eudragit® RL PO (EUD), hydroxypropylmethylcellulose (HPMC), HPMC acetate succinate (HPMCAS), and HPMC phthalate (HPMCP). The "amorphous solubility" of the drug alone was determined and then the changes in maximum achievable concentration were measured as a function of drug loading. Drug-polymer interactions were characterized using infrared spectroscopy (IR), differential scanning calorimetry (DSC) and moisture sorption analysis. The results showed that the maximum achievable concentration ("amorphous solubility") of lopinavir varied with the extent of drug-polymer interactions, as well as the drug weight fraction in the ASD. This information is of great value when evaluating the maximum achievable concentration of amorphous systems formulated with pH responsive polymers, and should contribute to a broader understanding of drug phase behavior in the context of ASDs.