RNA labeling, conjugation and ligation

Bridging the gap: RNAylation conjugates RNAs to proteins

In nature, the majority of known RNA-protein interactions are transient. Our recent study has depicted a novel mechanism known as RNAylation, which covalently links proteins and RNAs. This novel modification bridges the realms of RNA and protein modifications. This review specifically explores RNAylation catalyzed by bacteriophage T4 ADP-ribosyltransferase ModB, with a focus on its protein targets and RNA substrates in the context of Escherichia coli-bacteriophage T4 interaction. Additionally, we discuss the biological significance of RNAylation and present perspectives on RNAylation as a versatile bioconjugation strategy for RNAs and proteins.

Aqueous Activation of RNA 2'-OH for Conjugation with Amines and Thiols

Strategies for covalent modification of RNA are important for enabling biological studies of the biopolymer and for enhancing properties of therapeutic RNAs. While a number of electrophiles have been observed to react with RNA, few methods exist for reaction with nucleophiles. Here, we describe new reagents that enable efficient conjugation of amines and other nucleophiles to unmodified RNA postsynthetically via transient activation of 2'-OH groups. Reaction of single-stranded RNA in aqueous solution with phenolic imidazolecarbamates at room temperature results in stoichiometric and superstoichiometric yields of imidazolecarbonyl group adducts, and control experiments with DNA confirm the site of reaction in RNA as 2'-OH. Subsequent incubation of imidazolecarbonyl-activated RNAs with primary or selected secondary amines results in rapid, high-yield conversion to carbamate conjugates. The activation and subsequent nucleophile reaction can be carried out either stepwise or in a one-pot reaction. Thiols and phenol species react to yield (thio)carbonate adducts, and amino acid sidechains also react, suggesting possible future utility for protein conjugates and analysis of protein-RNA interactions. The activation method is found to be selective to unpaired regions of RNA, and can be directed to a specific location in a strand by use of a loop-inducing helper DNA. The results establish novel and efficient reagents and methods for modifying RNA postsynthetically with nucleophiles.

Efficient post-synthesis incorporation and conjugation of reactive ketones in RNA via 2'-acylation

Despite the broad utility of ketones in bioconjugation, few methods exist to introduce them into RNA. Here we develop highly reactive 2'-OH acylating reagents containing strained-ring ketones, and employ them as versatile labeling handles for RNA.

Oral delivery of RNAi for cancer therapy

Cancer is a major health concern worldwide and is still in a continuous surge of seeking for effective treatments. Since the discovery of RNAi and their mechanism of action, it has shown promises in targeted therapy for various diseases including cancer. The ability of RNAi to selectively silence the carcinogenic gene makes them ideal as cancer therapeutics. Oral delivery is the ideal route of administration of drug administration because of its patients' compliance and convenience. However, orally administered RNAi, for instance, siRNA, must cross various extracellular and intracellular biological barriers before it reaches the site of action. It is very challenging and important to keep the siRNA stable until they reach to the targeted site. Harsh pH, thick mucus layer, and nuclease enzyme prevent siRNA to diffuse through the intestinal wall and thereby induce a therapeutic effect. After entering the cell, siRNA is subjected to lysosomal degradation. Over the years, various approaches have been taken into consideration to overcome these challenges for oral RNAi delivery. Therefore, understanding the challenges and recent development is crucial to offer a novel and advanced approach for oral RNAi delivery. Herein, we have summarized the delivery strategies for oral delivery RNAi and recent advancement towards the preclinical stages.

Targeted delivery of RNAi to cancer cells using RNA-ligand displaying exosome

Exosome is an excellent vesicle for in vivo delivery of therapeutics, including RNAi and chemical drugs. The extremely high efficiency in cancer regression can partly be attributed to its fusion mechanism in delivering therapeutics to cytosol without endosome trapping. However, being composed of a lipid-bilayer membrane without specific recognition capacity for aimed-cells, the entry into nonspecific cells can lead to potential side-effects and toxicity. Applying engineering approaches for targeting-capacity to deliver therapeutics to specific cells is desirable. Techniques with chemical modification in vitro and genetic engineering in cells have been reported to decorate exosomes with targeting ligands. RNA nanoparticles have been used to harbor tumor-specific ligands displayed on exosome surface. The negative charge reduces nonspecific binding to vital cells with negatively charged lipid-membrane due to the electrostatic repulsion, thus lowering the side-effect and toxicity. In this review, we focus on the uniqueness of RNA nanoparticles for exosome surface display of chemical ligands, small peptides or RNA aptamers, for specific cancer targeting to deliver anticancer therapeutics, highlighting recent advances in targeted delivery of siRNA and miRNA that overcomes the previous RNAi delivery roadblocks. Proper understanding of exosome engineering with RNA nanotechnology promises efficient therapies for a wide range of cancer subtypes.

Chemoproteomic discovery of a human RNA ligase

RNA ligases are present across all forms of life. While enzymatic RNA ligation between 5'-PO₄ and 3'-OH termini is prevalent in viruses, fungi, and plants, such RNA ligases are yet to be identified in vertebrates. Here, using a nucleotide-based chemical probe targeting human AMPylated proteome, we have enriched and identified the hitherto uncharacterised human protein chromosome 12 open reading frame 29 (C12orf29) as a human enzyme promoting RNA ligation between 5'-PO₄ and 3'-OH termini. C12orf29 catalyses ATP-dependent RNA ligation via a three-step mechanism, involving tandem auto- and RNA AMPylation. Knock-out of C12ORF29 gene impedes the cellular resilience to oxidative stress featuring concurrent RNA degradation, which suggests a role of C12orf29 in maintaining RNA integrity. These data provide the groundwork for establishing a human RNA repair pathway.

Chloroacetamide-Modified Nucleotide and RNA for Bioconjugations and Cross-Linking with RNA-Binding Proteins

Reactive RNA probes are useful for studying and identifying RNA-binding proteins. To that end, we designed and synthesized chloroacetamide-linked 7-deaza-ATP which was a good substrate for T7 RNA polymerase in in vitro transcription assay to synthesize reactive RNA probes bearing one or several reactive modifications. Modified RNA probes reacted with thiol-containing molecules as well as with cysteine- or histidine-containing peptides to form stable covalent products. They also reacted selectively with RNA-binding proteins to form cross-linked conjugates in high conversions thanks to proximity effect. Our modified nucleotide and RNA probes are promising tools for applications in RNA (bio)conjugations or RNA proteomics.

Phosphorothioate-Based Site-Specific Labeling of Large RNAs for Structural and Dynamic Studies

Pulsed electron-electron double resonance (PELDOR) spectroscopy, X-ray scattering interferometry (XSI), and single-molecule Förster resonance energy transfer (smFRET) are molecular rulers that provide inter- or intramolecular pair-wise distance distributions in the nanometer range, thus being ideally suitable for structural and dynamic studies of biomolecules including RNAs. The prerequisite for such applications requires site-specific labeling of biomolecules with spin labels, gold nanoparticles, and fluorescent tags, respectively. Recently, site-specific labeling of large RNAs has been achieved by a combination of transcription of an expanded genetic alphabet containing A-T/G-C base pairs and NaM-TPT3 unnatural base pair (UBP) with post-transcriptional modifications at UBP bases by click chemistry or amine-NHS ester reactions. However, due to the bulky sizes of functional groups or labeling probes used, such strategies might cause structural perturbation and decrease the accuracy of distance measurements. Here, we synthesize an α-thiophosphorylated variant of rTPT3TP (rTPT3αS), which allows for post-transcriptional site-specific labeling of large RNAs at the internal α-phosphate backbone via maleimide-modified probes. Subsequent PELDOR, XSI, and smFRET measurements result in narrower distance distributions than labeling at the TPT3 base. The presented strategy provides a new route to empower the molecular rulers for structural and dynamic studies of large RNA and its complex.

Application of the Functionality Transfer Oligodeoxynucleotide for the Site-Selective Modification of RNA with a Divers Molecule

Due to the importance of the RNA chemical modifications, methods for the selective chemical modification at a predetermined site of the internal position of RNA have attracted much attention. We have developed functional artificial nucleic acids that modify a specific site of RNA in a site- and base-selective manner. In addition, the copper-catalyzed azide-alkyne cycloaddition (CuAAC) has been shown to introduce additional molecules on the alkynes attached to the pyridine ring. However, it was found that some azide compounds produced the cycloadduct in lower yields. Therefore, in this study, we synthesized the pyridinyl transfer group with the alkyne attached via a polyethylene glycol (PEG) linker with a different length and optimized its structure for both the transfer and CuAAC reaction. Three new transfer groups were synthesized by introducing an alkyne group at the end of the triethylene (11), tetraethylene (12) or pentaethylen glycol linker (13) at the 5-position of the pyridine ring of (E)-3-iodo-1-(pyridin-2-yl)prop-2-en-1-one. These transfer groups were introduced to the 6-thioguanine base in the oligodeoxynucleotide (ODN) in high yields. The transfer groups 11 and 12 more efficiently underwent the cytosine modification. For the CuAAC reaction, although 7 showed low adduct yields with the anionic azide compound, the new transfer groups, especially 12 and 13, significantly improved the yields. In conclusion, the transfer groups 12 and 13 were determined to be promising compounds for the modification of long RNAs.

Recent advances in RNA structurome

RNA structures are essential to support RNA functions and regulation in various biological processes. Recently, a range of novel technologies have been developed to decode genome-wide RNA structures and novel modes of functionality across a wide range of species. In this review, we summarize key strategies for probing the RNA structurome and discuss the pros and cons of representative technologies. In particular, these new technologies have been applied to dissect the structural landscape of the SARS-CoV-2 RNA genome. We also summarize the functionalities of RNA structures discovered in different regulatory layers-including RNA processing, transport, localization, and mRNA translation-across viruses, bacteria, animals, and plants. We review many versatile RNA structural elements in the context of different physiological and pathological processes (e.g., cell differentiation, stress response, and viral replication). Finally, we discuss future prospects for RNA structural studies to map the RNA structurome at higher resolution and at the single-molecule and single-cell level, and to decipher novel modes of RNA structures and functions for innovative applications.

Conjugation of RNA via 2'-OH acylation: Mechanisms determining nucleotide reactivity

The acylation reactivity of RNA 2'-OH groups has proven broadly useful for labeling and mapping RNA. Here we perform kinetics studies to test the mechanisms governing this reaction, and we find strong steric and inductive effects modulating reactivity. The results shed light on new strategies for improved conjugation and mapping.

Total RNA Synthesis and its Covalent Labeling Innovation

RNA plays critical roles in a wide range of physiological processes. For example, it is well known that RNA plays an important role in regulating gene expression, cell proliferation, and differentiation, and many other chemical and biological processes. However, the research community still suffers from limited approaches that can be applied to readily visualize a specific RNA-of-interest (ROI). Several methods can be used to track RNAs; these rely mainly on biological properties, namely, hybridization, aptamer, reporter protein, and protein binding. With respect to covalent approaches, very few cases have been reported. Happily, several new methods for efficient labeling studies of ROIs have been demonstrated successfully in recent years. Additionally, methods employed for the detection of ROIs by RNA modifying enzymes have also proved feasible. Several approaches, namely, phosphoramidite chemistry, in vitro transcription reactions, co-transcription reactions, chemical post-modification, RNA modifying enzymes, ligation, and other methods targeted at RNA labeling have been revealed in the past decades. To illustrate the most recent achievements, this review aims to summarize the most recent research in the field of synthesis of RNAs-of-interest bearing a variety of unnatural nucleosides, the subsequent RNA labeling research via biocompatible ligation, and beyond.

Fast microwave heating-based one-step synthesis of DNA and RNA modified gold nanoparticles

DNA/RNA-gold nanoparticle (DNA/RNA-AuNP) nanoprobes have been widely employed for nanobiotechnology applications. Here, we discover that both thiolated and non-thiolated DNA/RNA can be efficiently attached to AuNPs to achieve high-stable spherical nucleic acid (SNA) within minutes under a domestic microwave (MW)-assisted heating-dry circumstance. Further studies show that for non-thiolated DNA/RNA the conjugation is poly (T/U) tag dependent. Spectroscopy, test strip hybridization, and loading counting experiments indicate that low-affinity poly (T/U) tag mediates the formation of a standing-up conformation, which is distributed in the outer layer of SNA structure. In further application studies, CRISPR/Cas9-sgRNA (136 bp), SARS-CoV-2 RNA fragment (1278 bp), and rolling circle amplification (RCA) DNA products (over 1000 bp) can be successfully attached on AuNPs, which overcomes the routine methods in long-chain nucleic acid-AuNP conjugation, exhibiting great promise in biosensing and nucleic acids delivery applications. Current heating-dry strategy has improved traditional DNA/RNA-AuNP conjugation methods in simplicity, rapidity, cost, and universality.

Simple methods for attaching polynucleotides to gold nanoparticles are of interest for simplifying conjugation in a range of applications. Here, the authors report a microwave heating-based method for the fast, one-step attachment of a range of thiolated or non-thiolated DNA and RNA to gold nanoparticles.

Chemical Dual End-Labeling of Large Ribozymes

Fast and efficient site-specific labeling of long RNAs is one of the main bottlenecks limiting distance measurements by means of Förster resonance energy transfer (FRET) or electron paramagnetic resonance (EPR) spectroscopy. Here, we present an optimized protocol for dual end-labeling with different fluorophores at the same time meeting the restrictions of highly labile and degradation-sensitive RNAs. We describe in detail the dual-labeling of a catalytically active wild-type group II intron as a typical representative of long functional RNAs. The modular procedure chemically activates the 5'-phosphate and the 3'-ribose for bioconjugation with a pair of fluorophores, as shown herein, or with spin labels. The mild reaction conditions preserve the structural and functional integrity of the biomacromolecule and results in covalent, dual-labeled RNA in its pre-catalytic state in yields suitable for both ensemble and single-molecule FRET experiments.

Strategies for Covalent Labeling of Long RNAs

The introduction of chemical modifications into long RNA molecules at specific positions for visualization, biophysical investigations, diagnostic and therapeutic applications still remains challenging. In this review, we present recent approaches for covalent internal labeling of long RNAs. Topics included are the assembly of large modified RNAs via enzymatic ligation of short synthetic oligonucleotides and synthetic biology approaches preparing site-specifically modified RNAs via in vitro transcription using an expanded genetic alphabet. Moreover, recent approaches to employ deoxyribozymes (DNAzymes) and ribozymes for RNA labeling and RNA methyltransferase based labeling strategies are presented. We discuss the potentials and limits of the individual methods, their applicability for RNAs with several hundred to thousands of nucleotides in length and indicate future directions in the field.

RNA Ligation for Mono and Dually Labeled RNAs

Labeled RNAs are invaluable probes for investigation of RNA function and localization. However, mRNA labeling remains challenging. Here, we developed an improved method for 3'-end labeling of in vitro transcribed RNAs. We synthesized novel adenosine 3',5'-bisphosphate analogues modified at the N6 or C2 position of adenosine with an azide-containing linker, fluorescent label, or biotin and assessed these constructs as substrates for RNA labeling directly by T4 ligase or via postenzymatic strain-promoted alkyne-azide cycloaddition (SPAAC). All analogues were substrates for T4 RNA ligase. Analogues containing bulky fluorescent labels or biotin showed better overall labeling yields than postenzymatic SPAAC. We successfully labeled uncapped RNAs, NAD-capped RNAs, and 5'-fluorescently labeled m⁷ Gp₃ A_m -capped mRNAs. The obtained highly homogenous dually labeled mRNA was translationally active and enabled fluorescence-based monitoring of decapping. This method will facilitate the use of various functionalized mRNA-based probes.

Thermostability, Tunability, and Tenacity of RNA as Rubbery Anionic Polymeric Materials in Nanotechnology and Nanomedicine-Specific Cancer Targeting with Undetectable Toxicity

RNA nanotechnology is the bottom-up self-assembly of nanometer-scale architectures, resembling LEGOs, composed mainly of RNA. The ideal building material should be (1) versatile and controllable in shape and stoichiometry, (2) spontaneously self-assemble, and (3) thermodynamically, chemically, and enzymatically stable with a long shelf life. RNA building blocks exhibit each of the above. RNA is a polynucleic acid, making it a polymer, and its negative-charge prevents nonspecific binding to negatively charged cell membranes. The thermostability makes it suitable for logic gates, resistive memory, sensor set-ups, and NEM devices. RNA can be designed and manipulated with a level of simplicity of DNA while displaying versatile structure and enzyme activity of proteins. RNA can fold into single-stranded loops or bulges to serve as mounting dovetails for intermolecular or domain interactions without external linking dowels. RNA nanoparticles display rubber- and amoeba-like properties and are stretchable and shrinkable through multiple repeats, leading to enhanced tumor targeting and fast renal excretion to reduce toxicities. It was predicted in 2014 that RNA would be the third milestone in pharmaceutical drug development. The recent approval of several RNA drugs and COVID-19 mRNA vaccines by FDA suggests that this milestone is being realized. Here, we review the unique properties of RNA nanotechnology, summarize its recent advancements, describe its distinct attributes inside or outside the body and discuss potential applications in nanotechnology, medicine, and material science.

Optimization of N-hydroxysuccinimide ester coupling with aminoallyl-modified RNA for fluorescent labeling

Site-specific fluorescent labeling of RNA is crucial for obtaining the structural and dynamic information of RNAs by fluorescence techniques. Post-synthetic modification of RNA based on N-hydroxysuccinimide (NHS) coupling reaction is an economic, efficient and simple strategy to introduce fluorophore to samples. However, this strategy are not that frequently used in RNA molecules, and the reported reaction conditions and yields varied among different systems. This study results mainly focused on screening the reaction conditions (reactants concentrations, dimethylsulfoxide concentration, solution conditions, pH and reaction time) between NHS-linked fluorophore and aminoallyl-RNA (aa-RNA) to optimize the yield of fluorescent RNA up to 55%, doubled the initial yield. What's more, as low as one tenth of fluorescent reagent was used in our protocol compared with the reported protocols, greatly reducing the experimental cost. The protocol can be applied as a general guide potentially for RNA labeling by NHS-ester coupling reaction.

Tag-Free Internal RNA Labeling and Photocaging Based on mRNA Methyltransferases

The mRNA modification N6 -methyladenosine (m6 A) is associated with multiple roles in cell function and disease. The methyltransferases METTL3-METTL14 and METTL16 act as "writers" for different target transcripts and sequence motifs. The modification is perceived by dedicated "reader" and "eraser" proteins, but not by polymerases. We report that METTL3-14 shows remarkable cosubstrate promiscuity, enabling sequence-specific internal labeling of RNA without additional guide RNAs. The transfer of ortho-nitrobenzyl and 6-nitropiperonyl groups allowed enzymatic photocaging of RNA in the consensus motif, which impaired polymerase-catalyzed primer extension in a reversible manner. METTL16 was less promiscuous but suitable for chemo-enzymatic labeling using different types of click chemistry. Since both enzymes act on distinct sequence motifs, their combination allowed orthogonal chemo-enzymatic modification of different sites in a single RNA.

New Frontiers for Site-Directed RNA Editing: Harnessing Endogenous ADARs

RNA editing activity can be exploited for the restoration of disease-causing nonsense and missense mutations and as a tool to manipulate the transcriptome in a simple and programmable way. The general concept is called site-directed RNA editing and has high potential for translation into the clinics. Due to its different mode of action RNA editing may well complement gene editing and other gene therapy options. In this method chapter, we particularly highlight RNA editing strategies that harness endogenous ADARs. Such strategies circumvent the delivery and expression of engineered editases and are notably precise and simple. This is particularly true if endogenous ADARs are recruited with chemically modified antisense oligonucleotides, an approach we call RESTORE (recruiting endogenous ADAR to specific transcripts for oligonucleotide-mediated RNA editing). To foster the research and development of RESTORE we now report a detailed protocol for the procedure of editing reactions, and a protocol for the generation of partly chemically modified RESTORE ASOs with a combination of in vitro transcription and ligation.

Bioorthogonal chemistry-based RNA labeling technologies: evolution and current state

To understand the structure and ensuing function of RNA in various cellular processes, researchers greatly rely on traditional as well as contemporary labeling technologies to devise efficient biochemical and biophysical platforms. In this context, bioorthogonal chemistry based on chemoselective reactions that work under biologically benign conditions has emerged as a state-of-the-art labeling technology for functionalizing biopolymers. Implementation of this technology on sugar, protein, lipid and DNA is fairly well established. However, its use in labeling RNA has posed challenges due to the fragile nature of RNA. In this feature article, we provide an account of bioorthogonal chemistry-based RNA labeling techniques developed in our lab along with a detailed discussion on other technologies put forward recently. In particular, we focus on the development and applications of covalent methods to label RNA by transcription and posttranscription chemo-enzymatic approaches. It is expected that existing as well as new bioorthogonal functionalization methods will immensely advance our understanding of RNA and support the development of RNA-based diagnostic and therapeutic tools.

Site-specific covalent labeling of large RNAs with nanoparticles empowered by expanded genetic alphabet transcription

Conjugation of RNAs with nanoparticles (NPs) is of significant importance because of numerous applications in biology and medicine, which, however, remains challenging especially for large ones. So far, the majority of RNA labeling relies on solid-phase chemical synthesis, which is generally limited to RNAs smaller than 100 nucleotides (nts). We, here, present an efficient and generally applicable labeling strategy for site-specific covalent conjugation of large RNAs with a gold nanoparticle (Nanogold) empowered by transcription of an expanded genetic alphabet containing the A-T/U and G-C natural base pairs (bps) and the TPT3-NaM unnatural base pair (UBP). We synthesize an amine-derivatized TPT3 (TPT3^A), which is site specifically incorporated into a 97-nt 3'SL RNA and a 719-nt minigenomic RNA (DENV-mini) from Dengue virus serotype 2 (DENV2) by in vitro T7 transcription. The TPT3^A-modified RNAs are covalently conjugated with mono-Sulfo-N-hydroxysuccinimidyl (NHS)-Nanogold NPs via an amine and NHS ester reaction and further purified under nondenaturing conditions. TPT3 modification and Nanogold labeling cause minimal structural perturbations to the RNAs by circular dichroism, small angle X-ray scattering (SAXS), and binding activity assay. We demonstrate the application of the Nanogold-RNA conjugates in large RNA structural biology by an emerging molecular ruler, X-ray scattering interferometry (XSI). The internanoparticle distance distributions in the 3'SL and DENV-mini RNAs derived from XSI measurements support the hypothetical model of flavivirus genome circularization, thus, validate the applicability of this labeling strategy. The presented strategy overcomes the size constraints in conventional RNA labeling strategies and is expected to have wide applications in large RNA structural biology and RNA nanotechnology.

Context-Sensitive Cleavage of Folded DNAs by Loop-Targeting bPNAs

Herein, we demonstrate context-dependent molecular recognition of DNA by synthetic bPNA iron and copper complexes, using oxidative backbone cleavage as a chemical readout for binding. Oligoethylenimine bPNAs displaying iron·EDTA or copper·phenanthroline sites were found to be efficient chemical nucleases for designed and native structured DNAs with T-rich single-stranded domains. Cleavage reactivity depends strongly on structural context, as strikingly demonstrated with DNA substrates of the form (GGGTTA)_n. This repeat sequence from the human telomere is known to switch between parallel and antiparallel G-quadruplex (G4) topologies with a change from potassium to sodium buffer: notably, bPNA-copper complexes efficiently cleave long repeat sequences into ∼22-nucleotide portions in sodium, but not potassium, buffer. We hypothesize preferential cleavage of the antiparallel topology (Na⁺) over the parallel topology (K⁺) due to the greater accessibility of the TTA loop to bPNA in the antiparallel (Na⁺) form. Similar ion-sensitive telomere shortening upon treatment with bPNA nucleases can be observed in both isolated and intracellular DNA from PC3 cells by quantitative polymerase chain reaction. Live cell treatment was accompanied by accelerated cellular senescence, as expected for significant telomere shortening. Taken together, the loop-targeting approach of bPNA chemical nucleases complements prior intercalation strategies targeting duplex and quadruplex DNA. Structurally sensitive loop targeting enables discrimination between similar target sequences, thus expanding bPNA targeting beyond simple oligo-T sequences. In addition, bPNA nucleases are cell membrane permeable and therefore may be used to target native intracellular substrates. In addition, these data indicate that bPNA scaffolds can be a platform for new synthetic binders to particular nucleic acid structural motifs.

Nonradioactive Assay to Measure Polynucleotide Phosphorylation of Small Nucleotide Substrates

Polynucleotide kinases (PNKs) are enzymes that catalyze the phosphorylation of the 5' hydroxyl end of DNA and RNA oligonucleotides. The activity of PNKs can be quantified using direct or indirect approaches. Presented here is a direct, in vitro approach to measure PNK activity that relies on a fluorescently-labeled oligonucleotide substrate and polyacrylamide gel electrophoresis. This approach provides resolution of the phosphorylated products while avoiding the use of radiolabeled substrates. The protocol details how to set up the phosphorylation reaction, prepare and run large polyacrylamide gels, and quantify the reaction products. The most technically challenging part of this assay is pouring and running the large polyacrylamide gels; thus, important details to overcome common difficulties are provided. This protocol was optimized for Grc3, a PNK that assembles into an obligate pre-ribosomal RNA processing complex with its binding partner, the Las1 nuclease. However, this protocol can be adapted to measure the activity of other PNK enzymes. Moreover, this assay can also be modified to determine the effects of different components of the reaction, such as the nucleoside triphosphate, metal ions, and oligonucleotides.

Optimization and characterization of position-selective labelling of RNA (PLOR) for diverse RNA and DNA sequences

Modifications of short RNAs at specific sites can be achieved commercially by solid-phase chemical synthesis method. However, labelling long RNAs is still challenging for the routine methods. Position-selective Labelling of RNA (PLOR) is a hybrid phase transcription method that allows to label RNAs at desired sites with great flexibility and decent efficiency. In principle, PLOR is a promising method for synthesis of long modified RNAs that are unable to be generated by solid-phase chemical synthesis and other methods. However, as a recently developed method, PLOR has been only applied to label a 71nt and a 104nt RNA, and the limited sequence applications of PLOR may hinder its potential usages. To extend PLOR to more RNAs, we tested the PLOR performances for various RNA sequences. Considering that the controlled transcriptional pauses at the initiation stage in PLOR may lead to different preferences on RNA sequences from in vitro transcription method, we here focused on identifying the effects of the 5'-end and initiated lengths of RNA on PLOR. In addition, our work demonstrated that PLOR efficiencies also varied with linker sizes of DNA templates. This work can facilitate PLOR to be the choice of synthesizing long modified RNAs for more users in the near future.

Direct microRNA Sequencing Using Nanopore-Induced Phase-Shift Sequencing

MicroRNAs (miRNAs) are a class of short non-coding RNAs that function in RNA silencing and post-transcriptional gene regulation. However, direct characterization of miRNA is challenging due to its unique properties such as its low abundance, sequence similarities, and short length. Although urgently needed, single molecule sequencing of miRNA has never been demonstrated, to the best of our knowledge. Nanopore-induced phase-shift sequencing (NIPSS), which is a variant form of nanopore sequencing, could directly sequence any short analytes including miRNA. In practice, NIPSS clearly discriminates between different identities, isoforms, and epigenetic variants of model miRNA sequences. This work thus demonstrates direct sequencing of miRNA, which serves as a complement to existing miRNA sensing routines by the introduction of the single molecule resolution. Future engineering of this technique may assist miRNA-based early stage diagnosis or inspire novel cancer therapeutics.

•

The first demonstration of single molecule miRNA sequencing

•

miRNA sequencing by NIPSS can directly identify epigenetic modifications

•

Enzymatic conjugation enables NIPSS sequencing of natural miRNAs

The chemistry and applications of RNA 2'-OH acylation

RNA is a versatile biomolecule with a broad range of biological functions that go far beyond its initially described role as a simple information carrier. The development of chemical methods to control, manipulate and modify RNA has the potential to yield new insights into its many functions and properties. Traditionally, most of these methods involved the chemical modification of RNA structure using solid-state synthesis or enzymatic transformations. However, over the past 15 years, the direct functionalization of RNA by selective acylation of the 2'-hydroxyl (2'-OH) group has emerged as a powerful alternative that enables the simple modification of both synthetic and transcribed RNAs. In this Review, we discuss the chemical properties and design of effective reagents for RNA 2'-OH acylation, highlighting the unique problem of 2'-OH reactivity in the presence of water. We elaborate on how RNA 2'-OH acylation is being exploited to develop selective chemical probes that enable interrogation of RNA structure and function, and describe new developments and applications in the field.

Polyacetate and Polycarbonate RNA: Acylating Reagents and Properties

Acylation of RNA at 2'-OH groups is widely applied in mapping RNA structure and recently for controlling RNA function. Reactions are described that install the smallest 2-carbon acyl groups on RNA-namely, 2'-O-acetyl and 2'-O-carbonate groups. Hybridization and thermal melting experiments are performed to assess the effects of the acyl groups on duplex formation. Both reagents can be employed at lower concentrations to map RNA secondary structure by reverse transcriptase primer extension (SHAPE) methods.

Site-specific dual-color labeling of long RNAs for single-molecule spectroscopy

Labeling of long RNA molecules in a site-specific yet generally applicable manner is integral to many spectroscopic applications. Here we present a novel covalent labeling approach that is site-specific and scalable to long intricately folded RNAs. In this approach, a custom-designed DNA strand that hybridizes to the RNA guides a reactive group to target a preselected adenine residue. The functionalized nucleotide along with the concomitantly oxidized 3'-terminus can subsequently be conjugated to two different fluorophores via bio-orthogonal chemistry. We validate this modular labeling platform using a regulatory RNA of 275 nucleotides, the btuB riboswitch of Escherichia coli, demonstrate its general applicability by modifying a base within a duplex, and show its site-selectivity in targeting a pair of adjacent adenines. Native folding and function of the RNA is confirmed on the single-molecule level by using FRET as a sensor to visualize and characterize the conformational equilibrium of the riboswitch upon binding of its cofactor adenosylcobalamin. The presented labeling strategy overcomes size and site constraints that have hampered routine production of labeled RNA that are beyond 200 nt in length.

Unveiling the druggable RNA targets and small molecule therapeutics

The increasing appreciation for the crucial roles of RNAs in infectious and non-infectious human diseases makes them attractive therapeutic targets. Coding and non-coding RNAs frequently fold into complex conformations which, if effectively targeted, offer opportunities to therapeutically modulate numerous cellular processes, including those linked to undruggable protein targets. Despite the considerable skepticism as to whether RNAs can be targeted with small molecule therapeutics, overwhelming evidence suggests the challenges we are currently facing are not outside the realm of possibility. In this review, we highlight the most recent advances in molecular techniques that have sparked a revolution in understanding the RNA structure-to-function relationship. We bring attention to the application of these modern techniques to identify druggable RNA targets and to assess small molecule binding specificity. Finally, we discuss novel screening methodologies that support RNA drug discovery and present examples of therapeutically valuable RNA targets.

Simple alkanoyl acylating agents for reversible RNA functionalization and control

We describe the synthesis and RNA acylation activity of a series of minimalist azidoalkanoyl imidazole reagents, with the aim of functionalizing RNA at 2'-hydroxyl groups at stoichiometric to superstoichiometric levels. We find marked effects of small structural changes on their ability to acylate and be reductively removed, and identify reagents and methods that enable efficient RNA functionalization and control.

Advances that facilitate the study of large RNA structure and dynamics by nuclear magnetic resonance spectroscopy

The characterization of functional yet nonprotein coding (nc) RNAs has expanded the role of RNA in the cell from a passive player in the central dogma of molecular biology to an active regulator of gene expression. The misregulation of ncRNA function has been linked with a variety of diseases and disorders ranging from cancers to neurodegeneration. However, a detailed molecular understanding of how ncRNAs function has been limited; due, in part, to the difficulties associated with obtaining high-resolution structures of large RNAs. Tertiary structure determination of RNA as a whole is hampered by various technical challenges, all of which are exacerbated as the size of the RNA increases. Namely, RNAs tend to be highly flexible and dynamic molecules, which are difficult to crystallize. Biomolecular nuclear magnetic resonance (NMR) spectroscopy offers a viable alternative to determining the structure of large RNA molecules that do not readily crystallize, but is itself hindered by some technical limitations. Recently, a series of advancements have allowed the biomolecular NMR field to overcome, at least in part, some of these limitations. These advances include improvements in sample preparation strategies as well as methodological improvements. Together, these innovations pave the way for the study of ever larger RNA molecules that have important biological function. This article is categorized under: RNA Structure and Dynamics > RNA Structure, Dynamics, and Chemistry Regulatory RNAs/RNAi/Riboswitches > Regulatory RNAs RNA Structure and Dynamics > Influence of RNA Structure in Biological Systems.

Heavy-atom labeling of RNA by PLOR for de novo crystallographic phasing

Due to the paucity of known RNA structures, experimental phasing is crucial for obtaining three-dimensional structures of RNAs by X-ray crystallography. Covalent attachment of heavy atoms to RNAs is one of the most useful strategies to facilitate phase determination. However, this approach is limited by the inefficiency or inability to synthesize large RNAs (>60 nucleotides) site-specifically labeled with heavy atoms using traditional methods. Here, we applied our recently reported method, PLOR (position-selective labeling of RNA) to incorporate 5-iodouridine at specific positions in the adenine riboswitch RNA aptamer domain, which was then used for crystallization and subsequent de novo SAD phasing. PLOR is a powerful tool to improve the efficiency of obtaining RNA structures de novo by X-ray crystallography.

Coming Together: RNAs and Proteins Assemble under the Single-Molecule Fluorescence Microscope

RNAs, across their numerous classes, often work in concert with proteins in RNA-protein complexes (RNPs) to execute critical cellular functions. Ensemble-averaging methods have been instrumental in revealing many important aspects of these RNA-protein interactions, yet are insufficiently sensitive to much of the dynamics at the heart of RNP function. Single-molecule fluorescence microscopy (SMFM) offers complementary, versatile tools to probe RNP conformational and compositional changes in detail. In this review, we first outline the basic principles of SMFM as applied to RNPs, describing key considerations for labeling, imaging, and quantitative analysis. We then sample applications of in vitro and in vivo single-molecule visualization using the case studies of pre-messenger RNA (mRNA) splicing and RNA silencing, respectively. After discussing specific insights single-molecule fluorescence methods have yielded, we briefly review recent developments in the field and highlight areas of anticipated growth.

Chemical methods for the modification of RNA

RNA is often considered as being the vector for the transmission of genetic information from DNA to the protein synthesis machinery. However, besides translation RNA participates in a broad variety of fundamental biological roles such as gene expression and regulation, protein synthesis, and even catalysis of chemical reactions. This variety of function combined with intricate three-dimensional structures and the discovery of over 100 chemical modifications in natural RNAs require chemical methods for the modification of RNAs in order to investigate their mechanism, location, and exact biological roles. In addition, numerous RNA-based tools such as ribozymes, aptamers, or therapeutic oligonucleotides require the presence of additional chemical functionalities to strengthen the nucleosidic backbone against degradation or enhance the desired catalytic or binding properties. Herein, the two main methods for the chemical modification of RNA are presented: solid-phase synthesis using phosphoramidite precursors and the enzymatic polymerization of nucleoside triphosphates. The different synthetic and biochemical steps required for each method are carefully described and recent examples of practical applications based on these two methods are discussed.

Fluorescent peptide displacement as a general assay for screening small molecule libraries against RNA

A prominent hurdle in developing small molecule probes against RNA is the relative scarcity of general screening methods. In this study, we demonstrate the application of a fluorescent peptide displacement assay to screen small molecule probes against four different RNA targets. The designed experimental protocol combined with statistical analysis provides a fast and convenient method to simultaneously evaluate small molecule libraries against different RNA targets and classify them based on affinity and selectivity patterns.

Enzymatic synthesis of base-modified RNA by T7 RNA polymerase. A systematic study and comparison of 5-substituted pyrimidine and 7-substituted 7-deazapurine nucleoside triphosphates as substrates

We synthesized a small library of eighteen 5-substituted pyrimidine or 7-substituted 7-deazapurine nucleoside triphosphates bearing methyl, ethynyl, phenyl, benzofuryl or dibenzofuryl groups through cross-coupling reactions of nucleosides followed by triphosphorylation or through direct cross-coupling reactions of halogenated nucleoside triphosphates. We systematically studied the influence of the modification on the efficiency of T7 RNA polymerase catalyzed synthesis of modified RNA and found that modified ATP, UTP and CTP analogues bearing smaller modifications were good substrates and building blocks for the RNA synthesis even in difficult sequences incorporating multiple modified nucleotides. Bulky dibenzofuryl derivatives of ATP and GTP were not substrates for the RNA polymerase. In the case of modified GTP analogues, a modified procedure using a special promoter and GMP as initiator needed to be used to obtain efficient RNA synthesis. The T7 RNA polymerase synthesis of modified RNA can be very efficiently used for synthesis of modified RNA but the method has constraints in the sequence of the first three nucleotides of the transcript, which must contain a non-modified G in the +1 position.

An RNase P-Based Assay for Accurate Determination of the 5'-Deoxy-5'-azidoguanosine-Modified Fraction of in Vitro-Transcribed RNAs

Chemoenzymatic approaches are important for generating site-specific, chemically modified RNAs, a cornerstone for RNA structure-function correlation studies. T7 RNA polymerase (T7RNAP)-mediated in vitro transcription (IVT) of a DNA template containing the G-initiating class III Φ6.5 promoter is typically used to generate 5'-chemically modified RNAs by including a guanosine analogue (G analogue) initiator in the IVT. However, the yield of 5'-G analogue-initiated RNA is often poor and variable due to the high ratios of G analogue:GTP used in IVT. We recently reported that a T7RNAP P266L mutant afforded an approximately three-fold increase in fluorescent 5'-thienoguanosine-initiated pre-tRNA^Cys compared to the wild type T7RNAP. We have further explored the use of T7RNAP P266L to generate 5'-deoxy-5'-azidoguanosine (^az G)-initiated RNA and found that the mutant yielded approximately four times more ^az G-initiated pre-tRNA^Cys than the wild type in an IVT containing a 10:1 ratio of ^az G:GTP. For accurate quantitation of the 5'-^az G-initiated RNA fraction, we employed RNase P, an endonuclease that catalyzes the removal of the 5'-leader in pre-tRNAs. Importantly, we show herein how RNase P can be leveraged for assessing 5'-G analogue incorporation in any RNA by rendering the target RNA, upon its binding to a customized external guide sequence RNA, into an unnatural substrate of RNase P. Such an approach in conjunction with T7RNAP P266L-based IVT should aid chemoenzymatic methods that are designed to generate 5'-chemically modified RNAs.

Water-Soluble Leaving Group Enables Hydrophobic Functionalization of RNA

Attachment of hydrophobic groups to RNA is challenging because of their poor aqueous solubility. One-step acylation of RNA 2'-OH groups in water using a water-soluble imidazole leaving group is described. The effect of the hydrophobic groups on hybridization is reported. Furthermore, propargyl-functionalized RNA is shown to be readily labeled with a fluorophore. Lastly, heptyl-functionalized RNA is found to exhibit the unusual property of solubility in organic solvents.

Synthesis of Lipid-Carbohydrate-Peptidyl-RNA Conjugates to Explore the Limits Imposed by the Substrate Specificity of Cell Wall Enzymes on the Acquisition of Drug Resistance

Conjugation of RNA with multiple partners to obtain mimics of complex biomolecules is limited by the identification of orthogonal reactions. Here, lipid-carbohydrate-peptidyl-RNA conjugates were obtained by post-functionalization reactions, solid-phase synthesis, and enzymatic steps, to generate molecules mimicking the substrates of FmhB, an essential peptidoglycan synthesis enzyme of Staphylococcus aureus. Mimics of Gly-tRNA^Gly and lipid intermediate II (undecaprenyl-diphospho-disaccharide-pentapeptide) were combined in a single "bi-substrate" inhibitor (IC₅₀ =56 nm). The synthetic route was exploited to generate substrates and inhibitors containing d-lactate residue (d-Lac) instead of d-Ala at the C-terminus of the pentapeptide stem, a modification responsible for vancomycin resistance in the enterococci. The substitution impaired recognition of peptidoglycan precursors by FmhB. The associated fitness cost may account for limited dissemination of vancomycin resistance genes in S. aureus.

Imaging Newly Transcribed RNA in Cells by Using a Clickable Azide-Modified UTP Analog

Robust RNA labeling and imaging methods that enable the understanding of cellular RNA biogenesis and function are highly desired. In this context, we describe a practical chemical labeling method based on a bioorthogonal reaction, namely, azide-alkyne cycloaddition reaction, which facilitates the fluorescence imaging of newly transcribed RNA in both fixed and live cells. This strategy involves the transfection of an azide-modified UTP analog (AMUTP) into mammalian cells, which gets specifically incorporated into RNA transcripts by RNA polymerases present inside the cells. Subsequent posttranscriptional click reaction between azide-labeled RNA transcripts and a fluorescent alkyne substrate enables the imaging of newly synthesized RNA in cells by confocal microscopy. Typically, 50 μM to 1 mM of AMUTP and a transfection time of 15-60 min produce significant fluorescence signal from labeled RNA transcripts in cells.

The ULTIMATE Reagent: A Universal Photocleavable and Clickable Reagent for the Regiospecific and Reversible End Labeling of Any Nucleic Acid

There is a need for methods to chemically incorporate photocleavable labels into synthetic and biologically sourced nucleic acids in a chemically defined and reversible manner. We have previously demonstrated that the light-cleaved diazo di-methoxy nitro phenyl ethyl (diazo-DMNPE) group has a remarkable regiospecificity for modifying terminally phosphorylated siRNA. Building on this observation, we have identified conditions under which a diazo-DMNPE reagent that we designed (diazo-DMNPE-azide or DDA) is able to singly modify any nucleic acid (RNA, DNA, single-stranded, double-stranded, 3' or 5' phosphate). It can then be modified with any clickable reagent to incorporate arbitrary labels such as fluorophores into the nucleic acid. Finally, native nucleic acid can be regenerated directly through photolysis of the reagent. Use of the described approach should allow for the tagging of any nucleic acid, from any source-natural or unnatural-while allowing for the light-induced regeneration of native nucleic acid.

Eliminating Spurious Zero-Efficiency FRET States in Diffusion-Based Single-Molecule Confocal Microscopy

Single-molecule Förster resonance energy transfer (smFRET) of freely diffusing biomolecules using confocal microscopy is a simple and powerful technique for measuring conformation and dynamics. However, a spurious zero-FRET population can significantly distort the measured histograms and lead to incorrect results, particularly in measurements of intrinsically low-FRET systems. Using a model system consisting of duplex DNAs, we show that there are two important contributions to the zero-FRET state: (1) formation of a dark triplet state of the acceptor dye and (2) the presence of donor-only strands due to incomplete hybridization between donor- and acceptor-labeled strands. The combined strategy of using Trolox as a triplet-state quencher and labeling the same DNA strand with donor and acceptor dyes effectively eliminates the zero-FRET population, even for constructs with intrinsically low FRET efficiencies. This strategy allows us to perform smFRET experiments using a simple confocal microscope with improved accuracy.

A guide to large-scale RNA sample preparation

RNA is becoming more important as an increasing number of functions, both regulatory and enzymatic, are being discovered on a daily basis. As the RNA boom has just begun, most techniques are still in development and changes occur frequently. To understand RNA functions, revealing the structure of RNA is of utmost importance, which requires sample preparation. We review the latest methods to produce and purify a variation of RNA molecules for different purposes with the main focus on structural biology and biophysics. We present a guide aimed at identifying the most suitable method for your RNA and your biological question and highlighting the advantages of different methods. Graphical abstract In this review we present different methods for large-scale production and purification of RNAs for structural and biophysical studies.

Incorporation of isotopic, fluorescent, and heavy-atom-modified nucleotides into RNAs by position-selective labeling of RNA

Site-specific incorporation of labeled nucleotides is an extremely useful synthetic tool for many structural studies (e.g., NMR, electron paramagnetic resonance (EPR), fluorescence resonance energy transfer (FRET), and X-ray crystallography) of RNA. However, specific-position-labeled RNAs >60 nt are not commercially available on a milligram scale. Position-selective labeling of RNA (PLOR) has been applied to prepare large RNAs labeled at desired positions, and all the required reagents are commercially available. Here, we present a step-by-step protocol for the solid-liquid hybrid phase method PLOR to synthesize 71-nt RNA samples with three different modification applications, containing (i) a ¹³C¹⁵N-labeled segment; (ii) discrete residues modified with Cy3, Cy5, or biotin; or (iii) two iodo-U residues. The flexible procedure enables a wide range of downstream biophysical analyses using precisely localized functionalized nucleotides. All three RNAs were obtained in <2 d, excluding time for preparing reagents and optimizing experimental conditions. With optimization, the protocol can be applied to other RNAs with various labeling schemes, such as ligation of segmentally labeled fragments.

From "Cellular" RNA to "Smart" RNA: Multiple Roles of RNA in Genome Stability and Beyond

Coding for proteins has been considered the main function of RNA since the "central dogma" of biology was proposed. The discovery of noncoding transcripts shed light on additional roles of RNA, ranging from the support of polypeptide synthesis, to the assembly of subnuclear structures, to gene expression modulation. Cellular RNA has therefore been recognized as a central player in often unanticipated biological processes, including genomic stability. This ever-expanding list of functions inspired us to think of RNA as a "smart" phone, which has replaced the older obsolete "cellular" phone. In this review, we summarize the last two decades of advances in research on the interface between RNA biology and genome stability. We start with an account of the emergence of noncoding RNA, and then we discuss the involvement of RNA in DNA damage signaling and repair, telomere maintenance, and genomic rearrangements. We continue with the depiction of single-molecule RNA detection techniques, and we conclude by illustrating the possibilities of RNA modulation in hopes of creating or improving new therapies. The widespread biological functions of RNA have made this molecule a reoccurring theme in basic and translational research, warranting it the transcendence from classically studied "cellular" RNA to "smart" RNA.

Facile immobilization of DNA using an enzymatic his-tag mimic

Methods for immobilization of DNA on solid supports are in high demand. Herein, we present a generally applicable enzymatic method for the immobilization of DNA without any prior chemical derivatization. This strategy relies on the homopolymerization of the modified triphosphate dImTP by the TdT. The resulting enzymatic his-tag mimic ensures binding of DNA on Ni-NTA agarose. The usefulness of this method is highlighted by the immobilization of functional nucleic acids without impairing their specific activities.

A T7 RNA Polymerase Mutant Enhances the Yield of 5'-Thienoguanosine-Initiated RNAs

Spectroscopic methods, which are used to establish RNA structure-function relationships, require strategies for post-synthetic, site-specific incorporation of chemical probes into target RNAs. For RNAs larger than 50 nt, the enzymatic incorporation of a nucleoside or nucleotide monophosphate guanosine analogue (G analogue) at their 5'-end is routinely achieved by T7 RNA polymerase (T7RNAP)-mediated in vitro transcription (IVT) of the appropriate DNA template containing a GTP-initiating class III Φ6.5 promoter. However, when high G analogue:GTP ratios are used to bias G analogue incorporation at the 5'-end, RNA yield is compromised. Here, we show that the use of a T7RNAP P266L mutant in IVT with 10:1 thienoguanosine (^th G):GTP increased the percent incorporation and yield of 5'-^th G-initiated precursor tRNA for a net ≈threefold gain compared to IVT with wild-type T7RNAP. We also demonstrated that a one-pot multienzyme approach, consisting of transcription by T7RNAP P266L and post-transcriptional cleanup by polyphosphatase and an exonuclease, led to essentially near-homogeneous 5'-^th G-modified transcripts. This approach should be of broad utility in preparing 5'-modified RNAs.