Enzyme electrode for the determination of salicylate

Chromium(III) porphyrin as a selective ionophore in a salicylate-selective membrane electrode

The construction, potentiometric response properties, and applications of a novel ion-selective electrode with high selectivity toward salicylate are described. Chromium(III) tetraphenylporphyrin chloride was used as ion carrier into plasticized PVC membrane. This ionophore is capable of serving as both a positively charged and neutral carrier, depending on the pH of the sample solution. The influence of several variables was investigated to optimize the potentiometric response and selectivity of the electrode. The resulting electrode demonstrates a near-Nernstian response over a wide range of salicylate concentration (10(-6)-10(-1) M). This electrode has a fast response time and micromolar detection limit and could be used over a wide pH range (3-9). The proposed electrode showed very high selectivity for salicylate over a number of common inorganic and organic anions. The specific interaction of salicylate with the central metal of porphyrin is described based on UV-visible absorption spectra. The electrode was successfully applied to the determination of salicylate in pharmaceutical preparations and clinical samples.

Salicylate-selective electrodes based on AI(III) and Sn(IV) salophens

New salicylate-selective electrodes based on aluminum-(III) and tin(IV) salophens are described. The electrodes were prepared by incorporating the ionophores into plasticized poly(vinyl chloride) (PVC) membranes, which were directly coated on the surface of graphite electrodes. These novel electrodes display high selectivity for salicylate with respect to many common inorganic and organic anions. The influence of membrane composition and pH and the effect of lipophilic cationic and anionic additives on the response properties of the electrodes were investigated. The electrode based on aluminum salophen, with 32% PVC, 65.8% plasticizer, and 2.2% ionophore, shows the best potentiometric response characteristics and displays a linear log [Sal-] vs EMF response over the concentration range 1 x 10(-6) - 1 x 10(-1) M in phosphate buffer solutions of pH 7.0, with a Nernstian slope of -59.2 mV/decade of salicylate concentration. Highest selectivity was observed for the membrane incorporating 38.8% PVC, 57.3% plasticizer, 2.6% Sn(salophen), and 1.3% sodium tetraphenylborate. The electrodes exhibit fast response times and micromolar detection limits (approximately 1 x 10(-6) M salicylate) and could be used over a wide pH range of 3-8. Applications of the electrodes for determination of salicylate in pharmaceutical preparations and biological samples are reported.

A new enzyme electrode for quantification of salicylic acid in a FIA system

This work presents an amperometric biosensor incorporated into a flow configuration comprising salicylate hydroxylase that catalyses the irreversible hydroxylation of salicylate to catechol in the presence of NADH and molecular oxygen, and tyrosinase that further oxidises catechol giving o-quinone which is electrochemically reduced at -100 mV vs. Ag/AgCl yielding catechol and entering the catalytic oxidation and electrochemical reduction cycling which results in signal amplification and, consequently, low limits of detection. Additional incorporation of glucose dehydrogenase in the enzymatic sequence results in regeneration of NADH provided that glucose is present in the carrier stream and incorporation of a dialysis membrane provides operational stability to the biosensor. The analytical characteristics of this catalytic and electrochemical transduction sequence in a FIA system are: a limit of detection of 3.5 10(-6) M (S/N = 3), a sensitivity of 22.6 nA microM(-1) cm(-2), no loss of response at least after 5 h of continuous operation, and a sample frequency of 15 h(-1). Monitoring of salicylate after ingestion of 500 mg of acetylsalicylic acid has been followed in non-pretreated urine samples and the amount of salicylate in several drugs has been also successfully quantified.

A new salicylate ISFET for the determination of salicylic and acetylsalicylic acid in drugs

A salicylate ISFET for the analysis of salicylic and acetylsalicylic acid in drugs is described. It is based on a salicylate ion selective membrane coated on the surface of the Si3N4 gate of the FET. The sensitive membrane consists of tetra-dodecylammonium salicylate, polyvinyl chloride and a proper plasticizer. The linearity range of the sensor is 5 x 10(-5)-1.5 x 10(-2) M for the salicylic acid, and 7 x 10(-5)-1.5 x 10(-2) M for the acetylsalicylic acid, respectively. The detection limit for the two compounds is 5 x 10(-5) M while the response time is < or = 20 s. The effect of pH and different interfering ions was also studied. The sensor was used to analyse the content of acetylsalicylic and salicylic acid in some drugs, and the accuracy of the method was evaluated through recovery tests. The results obtained with this method are well correlated either with those obtained with a classical ISE employing the same sensitive membrane or with the classical volumetric method.

A flow-through system for the determination of salicylate in blood

A flow-through system for the determination of salicylate in blood is described. It consists of a Clark-type oxygen probe with the enzyme salicylate hydroxylase chemically bound to polymer supports. This probe, when inserted into a flow-through cell in the presence of salicylate, oxygen and NAD(P)H, produced a current signal proportional to the concentration of salicylate. Salicylate was assayed in the range 10 mumol/l up to 200 mumol/l with a detection limit of 3 mumol/l. Salicylate analysis was optimized by selecting the appropriate pH, buffer, temperature, enzyme immobilization and NAD(P)H concentration. The accuracy of this method was evaluated by recovery studies on 15 sera. Analysis of salicylate in serum sample was performed by diluting samples thirty fold with phosphate buffer to fit the calibration graphs. The response time of the probe was 2 min and 6 min was the time to perform a single analysis. Results compared with the TDx procedure correlated well.

Potentiometric (bioselective electrodes) assay systems: utility and limitations

Numerous potentiometric assays utilizing bioselective electrodes are fast revolutionizing many areas of biotechnology. Adequately discussing the utility and limitations of these electrochemical systems is the purpose of this review. A general overview introduces bioselective potentiometry by presenting basic concepts, historical background, and current developments. Essentially, the review consists of several sections describing electrode architecture, operational concepts, different biosensors, assay systems, applications, and future trends. Advantages and disadvantages of the different bioselective assay systems discussed are included throughout each section. Electrode design discussion covers conventional liquid probes and the newer solid-state transitor biosensors. Limitations and advantages of different chemoreceptors, biocatalysts, and potentiometric transducers are presented. Operational characteristics include: linear behavior, sensitivity, stability, specificity, response, recovery, and the influence of interfering factors. Enzyme, organelle, tissue, and microbial biocatalytic sensors are discussed. Bioligand systems include: affinity, immunoselective enzyme, and liposome sensors. Potentiometric bioselective drug, microbial, and immunoassay systems are also included.