The behaviour of collagen fibres in stress relaxation and stress distribution in the jaw-joint disc of rabbits

Microstructural, Micromechanical Atlas of the Temporomandibular Joint Disc

The temporomandibular joint (TMJ) disc is mainly composed of collagen, with its arrangement responding to efficient stress distribution. However, microstructural and micromechanical transformations of the TMJ disc under resting, functional, and pathological conditions remain unclear. To address this, our study presents a high-resolution microstructural and mechanical atlas of the porcine TMJ disc. First, the naive microstructure and mechanical properties were investigated in porcine TMJ discs (resting and functional conditions). Subsequently, the perforation and tear models (pathological conditions) were compared. Following this, a rabbit model of anterior disc displacement (abnormal stress) was studied. Results show diverse microstructures and mechanical properties at the nanometer to micrometer scale. In the functional state, gradual unfolding of the crimping cycle in secondary and tertiary structures leads to D-cycle prolongation in the primary structure, causing tissue failure. Pathological conditions lead to stress concentration near the injury site due to collagen interfibrillar traffic patterns, resulting in earlier damage manifestation. Additionally, the abnormal stress model shows collagen damage initiating at the primary structure and extending to the superstructure over time. These findings highlight collagen's various roles in different pathophysiological states. Our study offers valuable insights into TMJ disc function and dysfunction, aiding the development of diagnostic and therapeutic strategies for TMJ disorders, as well as providing guidance for the design of structural biomimetic materials.

Effect of region-dependent viscoelastic properties on the TMJ articular disc relaxation under prolonged clenching

The disc of the temporomandibular joint (TMJ) is located between the mandibular condyle and temporal bone, and has an important load-bearing and stress absorbing function. The TMJ disc presents viscoelastic characteristics that are largely dependent on its collagen fibre and proteoglycan composition and organization. The purpose of this study is to investigate the possible effects of region-specific dynamic viscoelastic properties on stress relaxation during prolonged clenching. Two finite element models were used to compare the stress distribution within the TMJ disc, namely, one with uniform disc material property and another one with region-specific disc material properties. Similar results were observed in both models with slight differences in the location of maximum stress. Larger stresses were observed in all cases for the model with uniform disc material property. Moreover, the higher values for the model with uniform disc material property appeared in the lateral region, while in the model with region-specific disc properties, these values moved to the lateral and central region. This investigation confirms that both models are sufficiently accurate to investigate stress distribution in the TMJ disc, and, particularly, the model with the region-specific disc material properties ensure better simulations of the TMJ disc behaviour.

Articular Disc of a Human Temporomandibular Joint: Evaluation through Light Microscopy, Immunofluorescence and Scanning Electron Microscopy

The extracellular matrix of the articular disc in a temporomandibular joint (TMJ) is composed mainly of collagen I and elastin. The collagen is important for resisting tensile forces, while the elastin is responsible to maintain the shape after deformation. We studied the orientation of collagen and elastin in a normal human temporomandibular joint disc by light microscopy, immunofluorescence and scanning electron microscopy. Our results demonstrated that collagen and elastin run parallel to each other in the intermediate zone with an anteroposterior orientation. From here, the orientation of two fibers groups changes into a disordered arrangement in the transition zone. Numerous elastic fibers cross with the collagen fibers, defining an interwoven knitted arrangement. The evaluation of the disc-condyle relationship shows that the medial margin of the articular disc is inserted directly at the superficial layer of the mandibular condylar cartilage. Therefore, the tensile properties of the TMJ disc are expressed in the directions corresponding to the orientation of the collagen fibers, and the complex orientation of elastin with the collagen determines the maintaining of the shape after the stresses by the joint movements. Moreover, the direct anatomical relationship between the articular disc and the mandibular condyle makes a decisive contribution to the understanding of TMJ movements.

Identification of Biomechanical Properties of Temporomandibular Discs

Material

Experimental and model tests were conducted on ten fresh porcine temporomandibular joint discs. The average thickness of disc tissue was, accordingly, 2.77 mm for the anterior zone, 3.98 mm for the posterior, and 1.54 mm for the intermediate. The selection of research material in the form of porcine discs was due to the similarity to human discs.

Methods

Discs were loaded in cycles, a temporary course with the amplitude 3 N and frequency 0.07 Hz, and growth in the load was 1 N/s. The selection of load frequency was due to real conditions of temporomandibular joint functioning during mastication. The necessary experimental research was conducted on a testing machine with a measurement range of 2.5 kN.

Results

The obtained numeric calculation results indicate that the number of load cycles has a decisive impact on the limitation of energy dispersion capacity through disc tissue. This phenomenon was observed in all the studies on the disc areas. Along with the growth in load cycles, discs are stiffened, and the most significant stiffness was observed in the intermediate area.

Conclusions

Based on the conducted research, it should be concluded that excessive load affecting temporomandibular joints caused by the act of mastication and occlusal forces generated during parafunction and in people with defined long-term bruxism has crucial importance on biomechanical disc properties and hence the course of temporomandibular joint conditions.

The Temporomandibular Joint: A Critical Review of Life-Support Functions, Development, Articular Surfaces, Biomechanics and Degeneration

The temporomandibular joint is a highly conserved articulation because it promotes survival and propagation via the essential functions of mastication, communication, and routine mating success (dentofacial esthetics). The temporomandibular joint is a unique secondary joint formed between the endochondral temporal bone and the mandibular secondary condylar cartilage via Indian hedgehog and bone morphogenetic protein signaling that is closely related to ear development. A dynamic epigenetic environment is provided by Spry1 and Spry2 genetic induction of the lateral pterygoid and temporalis muscles. Mechanical loading of the condylar periosteum during fetal development produces a superficial layer of fibrocartilage that separates from the condyle to form the interposed temporomandibular joint disc. The articular surfaces of the condyle and fossa are dynamically modified periosteum that has healing and regenerative capability. This unique tissue is composed of a superficial fibrous layer (synovial surface) with an underlying proliferative (cambium) layer that produces a cushioning layer of fibrocartilage which subsequently forms bone. Prior to occlusion of the first primary (deciduous) molars at about 16 months, facial development is dominated by primary genetic mechanisms. After achieving posterior functional occlusion, biomechanics enhances temporomandibular joint maturation, and assumes control of facial growth, development and adaptation. Concurrently, hypothalamus control of musculoskeletal physiology shifts from insulin-like growth factor IGF2 to IGF1, which affects bone via muscular loading (biomechanics). Three layers of temporomandibular joint fibrocartilage are resistant to heavy functional loading, but parafunctional clenching may result in degeneration that is first manifest as trabecular sclerosis of the mandibular condyle.

Estimation of jaw-opening forces, energy expenditure and jaw-opening patterns in adults

OBJECTIVES

The aims of this study were to investigate (1) the jaw-opening forces in different stages of jaw-opening, and determine the correlation among maximum jaw-opening force, maximum jaw-opening, and parameters such as age, height, weight, and gender, (2) the energy expenditure during jaw-opening, and (3) the jaw-opening patterns in adults.

DESIGN

This was a cross-sectional study. The sample consisted of 87 participants were recruited from Dunedin, New Zealand. Jaw-opening forces were measured using an adjustable, rigid extra-oral device connected to a 1000 N load cell.

MAIN RESULTS

Outcomes were highly skewed. The median (IQR) value of maximum jaw-opening was 48 mm (8 mm). The median of maximum jaw-opening force (40.0 N) was higher than jaw-opening force at maximum jaw-opening (35.2 N) (P < 0.01). The median (IQR) of the work was 1.30 J (1.28 J), ranging from 0.38 J to 4.03 J. The median of maximum jaw-opening force and work was higher in males (54.8 N; 1.22 J) than females (33.5 N; 0.74 J) (P < 0.05). Four jaw-opening force patterns (Pattern 1, 2, 3 and 4) were fitted and generated using Origin Pro software.

CONCLUSION

A wide range of variation in jaw-opening force and work was observed, and they displayed a non-parametric, highly skewed distributions. The maximum jaw-opening force did not correspond to the maximum jaw-opening. Further studies could explore the potential association among the jaw-opening force pattern, the work of jaw-opening and TMJ diseases.

Stribeck Curve Analysis of Temporomandibular Joint Condylar Cartilage and Disc

Temporomandibular joint (TMJ) diseases such as osteoarthritis and disc displacement have no permanent treatment options, but lubrication therapies, used in other joints, could be an effective alternative. However, the healthy TMJ contains fibrocartilage, not hyaline cartilage as is found in other joints. As such, the effect of lubrication therapies in the TMJ is unknown. Additionally, only a few studies have characterized the friction coefficient of the healthy TMJ. Like other cartilaginous tissues, the TMJ condyles and discs are subject to changes in friction coefficient due to fluid pressurization. In addition, the friction coefficient of the TMJ is affected by the sliding direction and anatomic location. However, these previous findings have not been able to identify how all 3 of these parameters (anatomic location, sliding direction, and fluid pressurization) influence changes in friction coefficient. This study used Stribeck curves to identify differences in the friction coefficients of TMJ condyles and discs based on anatomic location, sliding direction, and amount of fluid pressurization (friction mode). Friction coefficients were measured using a cartilage on glass tribometer. Both TMJ condyle and disc friction coefficients were well described by Stribeck curves. These curves changed based on anatomic location, but very few differences in friction coefficients were observed based on sliding direction. TMJ condyles had similar boundary mode and elastoviscous mode friction coefficients to the TMJ disc, and both were lower than hyaline cartilage in other joints. The observed differences here indicate that the surface characteristics of each anatomic region cause differences in friction coefficients.

Changes in the temporomandibular joint disc and temporal and masseter muscles secondary to bruxism in Turkish patients

Objectives:

To analyze the relationships between temporalis and masseter muscle hypertrophy and temporomandibular joint (TMJ) disc displacement in patients with severe bruxism using magnetic resonance imaging (MRI).

Methods:

This retrospective study included 100 patients with severe bruxism, referred to the Department of Oral and Maxillofacial Surgery, University of Marmara and Istanbul Medipol University, Istanbul, Turkey, between January 2015 and December 2016. Patients underwent TMJ MRI with a 1.5-T system in open and closed mouth positions. The masseter and temporalis muscles were measured in the axial plane when the patient’s mouth was closed.

Results:

At its thinnest, the disc averaged was 1.11±0.24 mm. At their thickest, the masseter averaged was 13.65±2.19 mm and temporalis muscles was 12.98±2.4 mm. Of the discs, 24% were positioned normally, 74% were positioned anteriorly, and 2% were positioned posteriorly. The temporalis muscle was significantly thicker in patients with normally positioned discs than in those with anteriorly positioned discs (p=0.035).

Conclusions:

The temporalis muscle was significantly thicker in patients with normally positioned discs than in those with anteriorly positioned discs (p=0.035). Additional studies should be conducted to evaluate the relationships between all masticatory and surrounding muscles and disc movements in patients with bruxism.

Regionally variant collagen alignment correlates with viscoelastic properties of the disc of the human temporomandibular joint

OBJECTIVE

To determine the regionally variant quality of collagen alignment in human TMJ discs and its statistical correlation with viscoelastic properties.

DESIGN

For quantitative analysis of the quality of collagen alignment, horizontal sections of human TMJ discs with Pricrosirius Red staining were imaged under circularly polarized microscopy. Mean angle and angular deviation of collagen fibers in each region were analyzed using a well-established automated image-processing for angular gradient. Instantaneous and relaxation moduli of each disc region were measured under stress-relaxation test both in tensile and compression. Then Spearman correlation analysis was performed between the angular deviation and the moduli. To understand the effect of glycosaminoglycans on the correlation, TMJ disc samples were treated by chondroitinase ABC (C-ABC).

RESULTS

Our imaging processing analysis showed the region-variant direction of collagen alignment, consistently with previous findings. Interestingly, the quality of collagen alignment, not only the directions, was significantly different in between the regions. The angular deviation of fiber alignment in the anterior and intermediate regions were significantly smaller than the posterior region. Medial and lateral regions showed significantly bigger angular deviation than all the other regions. The regionally variant angular deviation values showed statistically significant correlation with the tensile instantaneous modulus and the relaxation modulus, partially dependent on C-ABC treatment.

CONCLUSION

Our findings suggest the region-variant degree of collagen fiber alignment is likely attributed to the heterogeneous viscoelastic properties of TMJ disc that may have significant implications in development of regenerative therapy for TMJ disc.

Development of a fast curing tissue adhesive for meniscus tear repair

Isocyanate-terminated adhesive amphiphilic block copolymers are attractive materials to treat meniscus tears due to their tuneable mechanical properties and good adhesive characteristics. However, a drawback of this class of materials is their relatively long curing time. In this study, we evaluate the use of an amine cross-linker and addition of catalysts as two strategies to accelerate the curing rates of a recently developed biodegradable reactive isocyanate-terminated hyper-branched adhesive block copolymer prepared from polyethylene glycol (PEG), trimethylene carbonate, citric acid and hexamethylene diisocyanate. The curing kinetics of the hyper-branched adhesive alone and in combination with different concentrations of spermidine solutions, and after addition of 2,2-dimorpholinodiethylether (DMDEE) or 1,4-diazabicyclo [2.2.2] octane (DABCO) were determined using FTIR. Additionally, lap-shear adhesion tests using all compositions at various time points were performed. The two most promising compositions of the fast curing adhesives were evaluated in a meniscus bucket handle lesion model and their performance was compared with that of fibrin glue. The results showed that addition of both spermidine and catalysts to the adhesive copolymer can accelerate the curing rate and that firm adhesion can already be achieved after 2 h. The adhesive strength to meniscus tissue of 3.2-3.7 N was considerably higher for the newly developed compositions than for fibrin glue (0.3 N). The proposed combination of an adhesive component and a cross-linking component or catalyst is a promising way to accelerate curing rates of isocyanate-terminated tissue adhesives.

The Frictional Coefficient of the Temporomandibular Joint and Its Dependency on the Magnitude and Duration of Joint Loading

In synovial joints, friction between articular surfaces leads to shear stress within the cartilaginous tissue, which might result in tissue rupture and failure. Joint friction depends on synovial lubrication of the articular surfaces, which can be altered due to compressive loading. Therefore, we hypothesized that the frictional coefficient of the temporomandibular joint (TMJ) is affected by the magnitude and duration of loading. We tested this by measuring the frictional coefficient in 20 intact porcine TMJs using a pendulum-type friction tester. The mean frictional coefficient was 0.0145 (SD 0.0027) after a constant loading of 50 N during 5 sec. The frictional coefficient increased with the length of the preceding loading duration and exceeded 0.0220 (SD 0.0014) after 1 hr. Application of larger loading (80 N) resulted in significantly larger frictional coefficients. In conclusion, the frictional coefficient in the TMJ was proportional to the magnitude and duration of joint loading.

Fibrochondrocyte Growth and Functionality on TiO₂ Nanothin Films

Disorders affecting the temporomandibular joint (TMJ) are a long-standing health concern. TMJ disorders (TMJD) are often associated with an internal disc derangement accompanied by a suite of symptoms including joint noises, jaw dysfunction, and severe pain. The severity of patient symptoms and their reoccurrence can be alleviated to some extent with conservative therapy; however, refractory cases often require surgery that has shown only limited success. Bioengineered scaffolds with cell supportive surfaces an d nanoarchitectures that mimic TMJ tissue structure may offer an alternative treatment modality. In this study, titanium dioxide (TiO₂) nanothin films, fabricated by layer-by-layer assembly, were examined as means for creating such a scaffold. The viability and growth of TMJ discal fibrochondrocytes (FCs) were assessed through MTT and DNA assays and total protein content over a 14-day experimental period. ELISA was also used to measure expression of types I and II collagen, decorin and aggrecan. Quantitative analyses demonstrated that FCs synthesized characteristic discal matrix proteins, with an increased production of type I collagen and decorin as opposed to collagen type II and aggrecan. A stimulatory effect on discal FC proliferation and extracellular matrix (ECM) expression with thicker nanofilms was also observed. The cumulative results suggest that TiO₂ nanofilms may have potential as a TMJ scaffolding material.

Engineering Human TMJ Discs with Protein-Releasing 3D-Printed Scaffolds

The temporomandibular joint (TMJ) disc is a heterogeneous fibrocartilaginous tissue positioned between the mandibular condyle and glenoid fossa of the temporal bone, with important roles in TMJ functions. Tissue engineering TMJ discs has emerged as an alternative approach to overcoming limitations of current treatments for TMJ disorders. However, the anisotropic collagen orientation and inhomogeneous fibrocartilaginous matrix distribution present challenges in the tissue engineering of functional TMJ discs. Here, we developed 3-dimensional (3D)-printed anatomically correct scaffolds with region-variant microstrand alignment, mimicking anisotropic collagen alignment in the TMJ disc and corresponding mechanical properties. Connective tissue growth factor (CTGF) and transforming growth factor beta 3 (TGFβ3) were then delivered in the scaffolds by spatially embedding CTGF- or TGFβ3-encapsulated microspheres (µS) to reconstruct the regionally variant fibrocartilaginous matrix in the native TMJ disc. When cultured with human mesenchymal stem/progenitor cells (MSCs) for 6 wk, 3D-printed scaffolds with CTGF/TGFβ3-µS resulted in a heterogeneous fibrocartilaginous matrix with overall distribution of collagen-rich fibrous structure in the anterior/posterior (AP) bands and fibrocartilaginous matrix in the intermediate zone, reminiscent of the native TMJ disc. High dose of CTGF/TGFβ3-µS (100 mg µS/g of scaffold) showed significantly more collagen II and aggrecan in the intermediate zone than a low dose (50 mg µS/g of scaffold). Similarly, a high dose of CTGF/TGFβ3-µS yielded significantly higher collagen I expression in the AP bands compared with the low-dose and empty µS. From stress relaxation tests, the ratio of relaxation modulus to instantaneous modulus was significantly smaller with CTGF/TGFβ3-µS than empty µS. Similarly, a significantly higher coefficient of viscosity was achieved with the high dose of CTGF/TGFβ3-µS compared with the low-dose and empty µS, suggesting the dose effect of CTGF and TGFβ3 on fibrocartilage formation. Together, our findings may represent an efficient approach to engineering the TMJ disc graft with anisotropic scaffold microstructure, heterogeneous fibrocartilaginous matrix, and region-dependent viscoelastic properties.

Immortalization and characterization of mouse temporomandibular joint disc cell clones with capacity for multi-lineage differentiation

OBJECTIVE

Despite the importance of temporomandibular joint (TMJ) disc in normal function and disease, studying the responses of its cells has been complicated by the lack of adequate characterization of the cell subtypes. The purpose of our investigation was to immortalize, clone, characterize and determine the multi-lineage potential of mouse TMJ disc cells.

DESIGN

Cells from 12-week-old female mice were cultured and immortalized by stable transfection with human telomerase reverse transcriptase (hTERT). The immortalized cell clones were phenotyped for fibroblast- or chondrocyte-like characteristics and ability to undergo adipocytic, osteoblastic and chondrocytic differentiation.

RESULTS

Of 36 isolated clones, four demonstrated successful immortalization and maintenance of stable protein expression for up to 50 passages. Two clones each were initially characterized as fibroblast-like and chondrocyte-like on the basis of cell morphology and growth rate. Further the chondrocyte-like clones had higher mRNA expression levels of cartilage oligomeric matrix protein (COMP) (>3.5-fold), collagen X (>11-fold), collagen II expression (2-fold) and collagen II:I ratio than the fibroblast-like clones. In contrast, the fibroblast-like clones had higher mRNA expression level of vimentin (>1.5-fold), and fibroblastic specific protein 1 (>2.5-fold) than the chondrocyte-like clones. Both cell types retained multi-lineage potential as demonstrated by their capacity to undergo robust adipogenic, osteogenic and chondrogenic differentiation.

CONCLUSIONS

These studies are the first to immortalize TMJ disc cells and characterize chondrocyte-like and fibroblast-like clones with retained multi-differentiation potential that would be a valuable resource in studies to dissect the behavior of specific cell types in health and disease and for tissue engineering.

Current status of temporomandibular joint disorders and the therapeutic system derived from a series of biomechanical, histological, and biochemical studies

This article was designed to report the current status of temporomandibular joint disorders (TMDs) and the therapeutic system on the basis of a series of clinical, biomechanical, histological and biochemical studies in our research groups. In particular, we have focused on the association of degenerative changes of articular cartilage in the mandibular condyle and the resultant progressive condylar resorption with mechanical stimuli acting on the condyle during the stomatognathic function. In a clinical aspect, the nature and prevalence of TMDs, association of malocclusion with TMDs, association of condylar position with TMDs, association of craniofacial morphology with TMDs, and influences of TMDs, TMJ-osteoarthritis (TMJ-OA) in particular, were examined. In a biomechanical aspect, the nature of stress distribution in the TMJ from maximum clenching was analyzed with finite element method. In addition, the pattern of stress distribution was examined in association with varying vertical discrepancies of the craniofacial skeleton and friction between the articular disk and condyle. The results demonstrated an induction of large compressive stresses in the anterior and lateral areas on the condyle by the maximum clenching and the subsequent prominent increases in the same areas of the mandibular condyle as the vertical skeletal discrepancy became more prominent. Increase of friction at the articular surface was also indicated as a cause of larger stresses and the relevant disk displacement, which further induced an increase in stresses in the tissues posterior to the disks, indicating an important role of TMJ disks as a stress absorber. In a histological or biological aspect, increase in TMJ loading simulated by vertical skeletal discrepancy, which has already been revealed by the preceding finite element analysis or represented by excessive mouth opening, produced a decrease in the thickness of cartilage layers, an increase in the numbers of chondroblasts and osteoclasts and the subsequent degenerative changes in the condylar cartilage associated with the expression of bone resorption-related factors. In a biochemical or molecular and cellular aspect, excessive mechanical stimuli, irrespective of compressive or tensile stress, induced HA fragmentation, expression of proinflammatory cytokines, an imbalance between matrix metalloproteinases and the tissue inhibitors, all of which are assumed to induce lower resistance to external stimuli and degenerative changes leading to bone and cartilage resorption. Excessive mechanical stimuli also reduced the synthesis of superficial zone protein in chondrocytes, which exerts an important role in the protection of cartilage and bone layers from the degenerative changes. It is also revealed that various cytoskeletal changes induced by mechanical stimuli are transmitted through a stretch-activated or Ca2+channel. Finally, on the basis of the results from a series of studies, it is demonstrated that optimal intra-articular environment can be achieved by splint therapy, if indicated, followed by occlusal reconstruction with orthodontic approach in patients with myalgia of the masticatory muscles, and TMJ internal derangement or anterior disk displacement with or without reduction. It is thus shown that orthodontic treatment is available for the treatment of TMDs and the long-term stability after treatment.

Deterioration of mechanical properties of discs in chronically inflamed TMJ

Temporomandibular joint (TMJ) discs frequently undergo degenerative changes in arthritis. However, the biomechanical properties of pathogenic discs remain to be explored. In this study, we evaluated the effects of chronic inflammation on the biomechanical properties of TMJ discs in rats. Chronic inflammation of TMJs was induced by double intra-articular injections of complete Freund's adjuvant for 5 weeks, and biomechanical properties and ultrastructure of the discs were examined by mechanical testing, scanning electron microscopy, and transmission electron microscopy. The instantaneous compressive moduli of the anterior and posterior bands of discs in inflamed TMJs were decreased significantly compared with those in the control group. The instantaneous tensile moduli of the discs of inflamed TMJs also showed significant decreases in both the anterior-posterior and mesial-lateral directions. The relaxation moduli of the discs of inflamed TMJs showed nearly the same tendency as the instantaneous moduli. The surfaces of the discs of inflamed TMJs became rough and porous due to the loss of the superficial gel-like stratum, with many collagen fibers exposed and degradation of the sub-superficial collagen fibrils. Our results suggested that chronic inflammation of TMJ could lead to deterioration of mechanical properties and alteration of disc ultrastructure, which might contribute to TMJ disc displacement.

Temporomandibular disorders: a review of etiology, clinical management, and tissue engineering strategies

Temporomandibular disorders (TMD) are a class of degenerative musculoskeletal conditions associated with morphologic and functional deformities that affect up to 25% of the population, but their etiology and progression are poorly understood and, as a result, treatment options are limited. In up to 70% of cases, TMD are accompanied by malpositioning of the temporomandibular joint (TMJ) disc, termed "internal derangement." Although the onset is not well characterized, correlations between internal derangement and osteoarthritic change have been identified. Because of the complex and unique nature of each TMD case, diagnosis requires patient-specific analysis accompanied by various diagnostic modalities. Likewise, treatment requires customized plans to address the specific characteristics of each patient's disease. In the mechanically demanding and biochemically active environment of the TMJ, therapeutic approaches that can restore joint functionality while responding to changes in the joint have become a necessity. One such approach, tissue engineering, which may be capable of integration and adaptation in the TMJ, carries significant potential for the development of repair and replacement tissues. The following review presents a synopsis of etiology, current treatment methods, and the future of tissue engineering for repairing and/or replacing diseased joint components, specifically the mandibular condyle and TMJ disc. An analysis of native tissue characterization to assist clinicians in identifying tissue engineering objectives and validation metrics for restoring healthy and functional structures of the TMJ is followed by a discussion of current trends in tissue engineering.

Ruptured disc after arthroscopic repositioning in the temporomandibular joint: a retrospective magnetic resonance imaging study

Our aim was to explore the incidence of rupture after arthroscopic repositioning of the disc of the temporomandibular joint (TMJ) by reviewing magnetic resonance images (MRI) of the TMJ taken before and after operation, and to investigate correlations retrospectively. We studied 247 patients with anterior disc displacement of the TMJ, and categorised them into 3 groups based on the postoperative MRI. The first group comprised those whose disc ruptured after repositioning, the second those who had a possible rupture of the disc after repositioning, and the third had no rupture of the disc after repositioning. Age, sex, duration of symptoms, maximum incisal mouth opening, whether the anterior disc displacement was unilateral or bilateral, and the Wilkes stage, were included in the analysis. The incidence of rupture (5/247) was 2%. Weak points at the intermediate zone of the disc were found in 4 of the 5 joints. The patients whose discs ruptured were significantly younger than the other 2 groups (p=0.001). There was no statistically significant difference in preoperative duration of symptoms and mouth opening among the groups. The proportions of unilateral and bilateral disc displacement (p=0.047) and Wilkes stage (p=0.027) differed among the 3 groups. The Wilkes stages was significantly more advanced in the ruptured group than in the other 2 groups (p=0.027) with 4/5 being bilateral. The weak point in the intermediate zone of the disc on MRI could be a sign of rupture. Teenagers and young adults with anterior disc displacement without reduction, particularly those in whom it is bilateral, are at a higher risk of a rupture after repositioning of the disc by arthroscopy.

Relationship between anisotropic diffusion properties and tissue morphology in porcine TMJ disc

OBJECTIVE

To investigate the relationship between anisotropic solute diffusion properties and tissue morphology in porcine temporomandibular joint (TMJ) discs.

DESIGN

TMJ discs from eleven pigs aged 6-8 months were divided into five regions: anterior, intermediate, posterior, lateral, and medial. The transport properties and tissue morphology were investigated in three orthogonal orientations: anteroposterior (AP), mediolateral (ML), and superoinferior (SI). The anisotropic diffusivity of fluorescein (332 Da) in the right discs was determined by the fluorescence recovery after photobleaching (FRAP) protocols. The tissue morphology in the left discs was quantified by scanning electron microscopy.

RESULTS

The diffusivities of fluorescein in the TMJ disc were significantly anisotropic, except for the anterior region. In the medial, intermediate, and lateral regions, the diffusion along the fiber orientation (i.e., AP direction) was significantly faster than the diffusion in ML and SI directions. In the posterior region, the diffusion along the fiber orientation (i.e., ML direction) was significantly faster than the diffusion in AP and SI directions. The diffusion in the anterior region was mostly isotropic with the lowest degree of diffusion anisotropy, as well as collagen fiber alignment, likely due to the multi-directional fiber arrangement. The anterior region had the highest mean diffusivity [65.6 (49.3-81.8) μm(2)/s] in the disc, likely due to its high water content. The overall average diffusivity of fluorescein across the TMJ disc was 57.0 (43.0-71.0) μm(2)/s.

CONCLUSIONS

The solute diffusion in porcine TMJ discs was strongly anisotropic and inhomogeneous, which associated with tissue structure (i.e., collagen fiber alignment) and composition (e.g., water content).

The regional contribution of glycosaminoglycans to temporomandibular joint disc compressive properties

Understanding structure-function relationships in the temporomandibular joint (TMJ) disc is a critical first step toward creating functional tissue replacements for the large population of patients suffering from TMJ disc disorders. While many of these relationships have been identified for the collagenous fraction of the disc, this same understanding is lacking for the next most abundant extracellular matrix component, sulfated glycosaminoglycans (GAGs). Though GAGs are known to play a major role in maintaining compressive integrity in GAG-rich tissues such as articular cartilage, their role in fibrocartilaginous tissues in which GAGs are much less abundant is not clearly defined. Therefore, this study investigates the contribution of GAGs to the regional viscoelastic compressive properties of the temporomandibular joint (TMJ) disc. Chondroitinase ABC (C-ABC) was used to deplete GAGs in five different disc regions, and the time course for >95% GAG removal was defined. The compressive properties of GAG depleted regional specimens were then compared to non-treated controls using an unconfined compression stress-relaxation test. Additionally, treated and non-treated specimens were assayed biochemically and histologically to confirm GAG removal. Compared to untreated controls, the only regions affected by GAG removal in terms of biomechanical properties were in the intermediate zone, the most GAG-rich portion of the disc. Without GAGs, all intermediate zone regions showed decreased tissue viscosity, and the intermediate zone lateral region also showed a 12.5% decrease in modulus of relaxation. However, in the anterior and posterior band regions, no change in compressive properties was observed following GAG depletion, though these regions showed the highest compressive properties overall. Although GAGs are not the major extracellular matrix molecule of the TMJ disc, they are responsible for some of the viscoelastic compressive properties of the tissue. Furthermore, the mechanical role of sulfated GAGs in the disc varies regionally in the tissue, and GAG abundance does not always correlate with higher compressive properties. Overall, this study found that sulfated GAGs are important to TMJ disc mechanics in the intermediate zone, an important finding for establishing design characteristics for future tissue engineering efforts.

Effect of functional shift of the mandible on lubrication of the temporomandibular joint

Lubrication of synovial joints reduces the coefficient of friction of the articular cartilage surface. To investigate the effect of malocclusion on the lubrication of the temporomandibular joint (TMJ), we evaluated lubricin expression in the rat TMJ immunohistochemically, under conditions of functional lateral shift of the mandible, during period of growth. Thirty 5-week-old male Wistar rats were divided into experimental, recovery, and control groups. Each rt in the experimental and recovery groups was fitted with an acrylic-plate guiding appliance. The rats in the experimental and control groups were killed at 14 and 28 days after the appliance was attached. Each rat in the recovery group was detached from the appliance at 14 days, and was killed 14 days after the appliance was removed. In the experimental group, the expression of lubricin staining in TMJ cartilage was significantly decreased during the experimental period. In the recovery group, the expression of lubricin staining in TMJ cartilage was significantly greater than in the experimental group, and there was no significant difference at 28 days between the control and recovery groups. Analysis of these data suggests that a functional lateral shift of the mandible during the growth period influences lubrication of the TMJ.

Indirect measurement of the temporomandibular joint disc elasticity with magnetic resonance imaging

OBJECTIVES

The radiological evaluation of the temporomandibular joint (TMJ) consists of demonstrating the morphological features of the disc and the condyle in closed and open mouth positions using MRI. We aimed to determine elasticity of the disc by measuring the amount of elongation during mouth opening.

METHODS

The study population included 49 patients. Coronal T(1) and multiplane oblique T(2) weighted gradient recalled echo sequences were acquired in open and closed mouth positions. Biconcave TMJ disc lengths were measured on sagittal oblique images in both positions. Elongation ratio (ER) was calculated for each patient. According to the findings, TMJs are classified into subgroups: normal (N), dislocated with reduction (DWR), pure DWR (p-DWR), DWR with additional findings (DWR-a) and dislocated without reduction (DWOR). Statistical analysis was performed using the χ(2) test and receiver operating characteristic analysis.

RESULTS

Out of 98 discs, 22 of them were evaluated as N, 60 as DWR (28 p-DWR, 32 DWR-a) and 16 as DWOR. There was no significant difference among the disc lengths in three subgroups at the closed mouth position (P = 0.15), whereas there was significant difference in the open mouth position (P = 0.0001). There was significant difference among subgroups as far as ER is concerned (P < 0.05).

CONCLUSIONS

ER is a strong indicator of elasticity. Compared with the N group, elasticity of the disc was not significantly different in the p-DWR group but the disc elasticity was very degraded in DWR-a and in DWOR. A negative conversion or one smaller than 1.4 mm means a compromised disc, although sometimes it will possess normal anatomical configurations or signal characteristics.

Regional cell density distribution and oxygen consumption rates in porcine TMJ discs: an explant study

OBJECTIVE

To determine the regional cell density distribution and basal oxygen consumption rates (based on tissue volume and cell number) of temporomandibular joint (TMJ) discs and further examine the impact of oxygen tension on these rates.

DESIGN

TMJ discs from pigs aged 6-8 months were divided into five regions: anterior, intermediate, posterior, lateral and medial. The cell density was determined using confocal laser scanning microscopy. The change in oxygen tension was recorded while TMJ disc explants were cultured in sealed metabolism chambers. The volume based oxygen consumption rate of explants was determined by theoretical curve-fitting of the recorded oxygen tension data with the Michaelis-Menten equation. The rate on a per-cell basis was calculated based on the cell density measurements and volume based rate measured in another group of discs.

RESULTS

The overall cell density [mean, 95% confidence interval (CI)] was 51.3 (21.3-81.3) × 10(6) cells/mL wet tissue. Along the anteroposterior axis, the anterior band had 25.5% higher cell density than the intermediate zone (P<0.02) and 29.1% higher than the posterior band (P<0.008). Along the mediolateral axes, the medial region had 26.2% higher cell density than the intermediate zone (P<0.04) and 25.4% higher than the lateral region (P<0.045). The overall volume and cell based maximum oxygen consumption rates were 1.44 (0.44-2.44) μmol/mL wet tissue/h and 28.7 (12.2-45.2)nmol/10(6)cells/h, respectively. The central regions (intermediate, lateral, and medial) had significantly higher volume based (P<0.02) and cell based (P<0.005) oxygen consumption rates than the anterior and posterior bands. At high oxygen tension, the oxygen consumption rate remained constant, but dropped as oxygen tension fell below 5%.

CONCLUSIONS

The TMJ disc had higher cell density and oxygen consumption rates than articular cartilage reported in the literature. These results suggest that a steeper oxygen gradient may exist in the TMJ disc and may be vulnerable to pathological events that impede nutrient supply.

An interspecies comparison of the temporomandibular joint disc

The temporomandibular joint (TMJ) disc plays a critical role in normal function of the joint, and many disorders of the TMJ are a result of disc dysfunction. Previous quantitative TMJ characterization studies examined either the human or a specific animal model, but no single study has compared different species, in the belief that differences in joint morphology, function, and diet would be reflected in the material properties of the disc. In this study, we examined topographical biochemical (collagen, glycosaminoglycan, and DNA content) and biomechanical (tensile and compressive) properties of the human TMJ disc, and also discs from the cow, goat, pig, and rabbit. Regional and interspecies variations were identified in all parameters measured, and certain disc characteristics were observed across all species, such as a weak intermediate zone under mediolateral tension. While human discs possessed properties distinct from those of the other species, pig discs were most similar to the human, suggesting that the pig may be a suitable animal model for TMJ bioengineering efforts.

Biomechanical and biochemical characteristics of the mandibular condylar cartilage

The human masticatory system consists of a mandible which is able to move with respect to the skull at its bilateral temporomandibular joint (TMJ) through contractions of the masticatory muscles. Like other synovial joints, the TMJ is loaded mechanically during function. The articular surface of the mandibular condyle is covered with cartilage that is composed mainly of collagen fibers and proteoglycans. This construction results in a viscoelastic response to loading and enables the cartilage to play an important role as a stress absorber during function. To understand its mechanical functions properly, and to assess its limitations, detailed information about the viscoelastic behavior of the mandibular condylar cartilage is required. The purpose of this paper is to review the fundamental concepts of the biomechanical behavior of the mandibular condylar cartilage. This review consists of four parts. Part 1 is a brief introduction of the structure and function of the mandibular condylar cartilage. In Part 2, the biochemical composition of the mandibular condylar cartilage is summarized. Part 3 explores the biomechanical properties of the mandibular condylar cartilage. Finally, Part 4 relates this behavior to the breakdown mechanism of the mandibular condylar cartilage which is associated with the progression of osteoarthritis in the TMJ.

Age-related changes in the microarchitecture of collagen fibrils in the articular disc of the rat temporomandibular joint

The microarchitecture of collagen fibrils in the articular disc of the temporomandibular joint (TMJ) plays an important role in dissipating the mechanical load during jaw movement. However, little information is available on its adaptations to the biomechanical environment during development. To address this issue, we analyzed the diameter of collagen fibrils of the articular disc of the rat TMJ with quantitative ultrastructural analysis during postnatal development. The mean diameter of the collagen fibrils significantly increased and the arrangement of the collagen fiber networks became compact during development. Articular discs of suckling rat pups were composed of thin, uniformly sized collagen fibrils (range: 30-60 nm, peak: 40-50 nm). At the age of 4 weeks, thicker collagen fibrils began to appear in articular discs, shortly after weaning (range: 20-70 nm, peak: 40-50 nm). In articular discs of adult rats, collagen fibrils varied widely in diameter, with thick fibrils predominating (range: 10-120 nm, peak: 40-70 nm). These age-related changes in the microarchitecture of collagen fibrils in articular discs may reflect changes in their biomechanical environment during development.

Effects of masticatory muscle force on temporomandibular joint disc growth in rats

Biomechanical factors in masticatory function are related to the development of the mandible and the condyle. Previous studies have reported that reduced masticatory muscle force influences mandibular bone formation and chondroblastic proliferation. We examined the importance of compressive force in temporomandibular joint (TMJ) disc growth by reducing the masticatory load. Thirty 3-week-old male Wistar rats were used in this study. In the experimental group, the masseter muscles were bilaterally resected to evaluate the influence of masticatory muscle force on morphology and composition of TMJ disc during growth. No surgery was performed in the control group. The thickness of the TMJ disc was measured to evaluate the morphological changes. The localization of type I collagen and decorin was performed by immunostaining to examine compositional change. Cell proliferation in the disc was identified by insulin-like growth factor-1 receptor (IGF-1r) immunostaining. The disc thickness at each region in the experimental group was reduced compared to the control group. While in the control group, type I collagen and decorin were identified throughout the disc, it was concentrated on the superior portion of the disc at the anterior and posterior bands in the experimental group. The expression of IGF-1r immunopositive cells in the experimental group was also significantly lower than in the control. We conclude that masticatory muscle force is closely related to TMJ disc morphology and composition during growth.

Lubrication of the temporomandibular joint

Although tissue engineering of the temporomandibular joint (TMJ) structures is in its infancy, tissue engineering provides the revolutionary possibility for treatment of temporomandibular disorders (TMDs). Recently, several reviews have provided a summary of knowledge of TMJ structure and function at the biochemical, cellular, or mechanical level for tissue engineering of mandibular cartilage, bone and the TMJ disc. As the TMJ enables large relative movements, joint lubrication can be considered of great importance for an understanding of the dynamics of the TMJ. The tribological characteristics of the TMJ are essential for reconstruction and tissue engineering of the joint. The purpose of this review is to provide a summary of advances relevant to the tribological characteristics of the TMJ and to serve as a reference for future research in this field. This review consists of four parts. Part 1 is a brief review of the anatomy and function of the TMJ articular components. In Part 2, the biomechanical and biochemical factors associated with joint lubrication are described: the articular surface topology with microscopic surface roughness and the biomechanical loading during jaw movements. Part 3 includes lubrication theories and possible mechanisms for breakdown of joint lubrication. Finally, in Part 4, the requirement and possibility of tissue engineering for treatment of TMDs with degenerative changes as a future treatment regimen will be discussed in a tribological context.

Influence of unilateral disc displacement on the stress response of the temporomandibular joint discs during opening and mastication

The temporomandibular joint plays a crucial role in human mastication acting as a guide of jaw movements. During these movements, the joint is subjected to loads which cause stresses and deformations in its cartilaginous structures. A perfect balance between the two sides of the joint is essential to maintain the physiological stress level within the tissues. Therefore, it has been suggested that a derangement of the joint is a contributing factor in the development of mandibular asymmetry, especially if problems of the temporomandibular joint start in childhood or adolescence. To analyze the movement of the mandible and the stresses undergone by the discs, two finite element models of the human temporomandibular joint including the masticatory system were developed, one corresponding to a healthy joint and the other with a unilateral anterior disc displacement with their movement controlled by muscle activation. A fibre-reinforced porohyperelastic model was used to simulate the behaviour of the articular discs. The stress distribution was analyzed in both models during free opening and closing, and during the introduction of a resistant force between incisors or molars. It was found that a slight unilateral anterior disc displacement does not lead to mandibular asymmetry but to a slight decrease of the maximum gape. With the introduction of a restriction between incisors, the maximum stresses moved to the anterior band in contrast to what happened if the restriction was imposed between molars where maximum stresses were located more posteriorly. Finally, the presence of a unilateral displacement of the disc involved a strong change in the overall behaviour of the joint including also the healthy side, where the maximum stresses moved to the posterior part.

Temporomandibular joint soft-tissue pathology, I: Disc abnormalities

The internal derangements are the most common noninflammatory abnormalities of the disc, observed even in asymptomatic subjects. Because the temporomandibular joint shows large adaptative and compensatory mechanisms over dysfunctional disc motion, these disorders may be asymptomatic or minimally evident for a long time. A careful clinical evaluation, reinforced by imaging findings, should help differentiate asymptomatic derangements from painful conditions that may require treatment.

Effects of Tissue-Engineered Articular Disc Implants on the Biomechanical Loading of the Human Temporomandibular Joint in a Three-Dimensional Finite Element Model

The purpose of this study was to evaluate biomechanical loading of the temporomandibular joint when using a biodegradable laminate implant to replace the articular disc and to test the hypothesis that the use of the implant reduces stress distribution in the condyle, implant, and glenoid fossa. A finite element model of a female human mandible, including the temporomandibular joint, which had two standard endosseous implants inserted bilaterally in the premolar region, was constructed from computed tomography scan images using a commercially available finite element software. The disc, condyle, and glenoid fossa were arbitrarily divided into five regions: the anterior, posterior, medial, lateral, and central. The disc was then replaced with a poly-L/DL-lactide biodegradable laminate. The finite element model was then used to predict principal and Von Mises stresses. The use of poly-L/DL-lactide implant resulted in remarkable reduction in Von Mises stresses (approximately threefold) in the anterior, central, and medial regions of the mandibular condyle in comparison with slight to moderate stress reductions in the corresponding regions of the implant and glenoid fossa. The mandibular condyle also demonstrated the largest total displacement in all directions followed by the implant and glenoid fossa. The use of an alloplastic implant such as the bioresorbable, poly-L/DL-lactide laminate to replace the articular disc reduces loading of the mandibular condyle rather than the implant and glenoid fossa. These findings lead to support the hypothesis that the mandibular condyle more likely functions as a shock absorber than the disc. The use of bioresorbable laminate implants might prove an efficient technique to replace the articular disc and promote normal function of the temporomandibular joint.

Three-dimensional finite-element model of the human temporomandibular joint disc during prolonged clenching

In the temporomandibular joint (TMJ), overloading induced by prolonged clenching appears to be important in the cascade of events leading to disc displacement. In this study, the effect of disc displacement on joint stresses during prolonged clenching was studied. For this purpose, finite-element models of the TMJ, with and without disc displacement, were used. Muscle forces were used as a loading condition for stress analysis during a time-period of 10 min. The TMJ disc and connective tissue were characterized as a linear viscoelastic material. In the asymptomatic model, large stresses were found in the central and lateral part of the disc through clenching. In the retrodiscal tissue, stress relaxation occurred during the first 2 min of clenching. In the symptomatic model, large stresses were observed in the posterior part of the disc and in the retrodiscal tissue, and the stress level was kept constant through clenching. This indicates that during prolonged clenching the disc functions well in the asymptomatic joint, meanwhile the retrodiscal tissue in the symptomatic joint is subject to excessive stress. As this structure is less suitable for bearing large stresses, tissue damage may occur. In addition, storage of excessive strain energy might lead to breakage of the tissue.

Organization and function of the collagen fiber system in the human temporomandibular joint disk and its attachments

The collagen fiber organization in the anterior band (AB), intermediate zone (IZ) and posterior band (PB) of the disk of the human jaw joint disk and in its attachments was studied under the polarizing microscope. Observations were made on serially sectioned joints (n = 6) and three sets of disk samples sectioned along mutually perpendicular planes (n = 21). The collagen fiber bundles in all disk regions branch and join or are decussated with other bundles. The fibers of the IZ were oriented generally parallel to the disk surfaces. Most of these fibers extend into the AB and PB where they either join with transverse or vertically oriented fiber groups or pass through the bands into the disk attachments. The lateral branching/decussation angles of fibers in the IZ and adjacent regions of the AB and PB were measured in the central region of four disks. The mean angle for all regions was 28 +/- 13 degrees . The mean angles in the region transitional between the IZ and AB and in the anterior region of the IZ were significantly greater than those in the posterior part of the IZ (p = 0.001 and 0.050 for the two comparisons). The large caliber, vertically oriented fibers in the AB, IZ and PB were counted in nine specimens. Disk dimensions were also measured in these specimens. The vertically and transversely oriented bundles were more frequent in the band regions. The number of vertically oriented fiber bundles varied within and between the disk bands. Vertical fiber number in the AB was greater laterally than medially (p = 0.04). In the PB the fiber number was greater than in either the AB or IZ (p = 0.000 for both comparisons) and within the PB itself the fiber number was greater in its thicker, medial half (p = 0.014). The fiber number in the AB and IZ was not different. The thickness of the AB, IZ and PB and disk length was measured in sections located laterally, centrally and medially. No difference in disk length was found across these planes. Statistically significant differences were found in regional disk thickness. In all of the mediolateral planes, the AB and PB were thicker than the IZ and the PB was thicker than the AB (p = 0.000 for all comparisons). The IZ was thicker medially than laterally (p = 0.034). The PB was thicker centrally and medially than laterally (p = 0.002 and 0.001, respectively). PB thickness in its central and medial regions was not different. The findings, combined with other evidence, suggest that the fiber system of the disk serves a stress distribution function and that within the AB and PB, the regions containing the greatest number of vertical fibers may also be the sites of greatest compressive stress during jaw function.

Tissue Engineering of the TMJ disc: a review

The potential impact of a tissue-engineered temporomandibular joint (TMJ) disc is immense. Currently, patients suffering from a severely dysfunctional TMJ have few options. Facing the general lack of safe, effective TMJ disc implants, many patients undergo discectomy, a procedure that removes the injured TMJ disc in hopes of reducing debilitating symptoms associated with severe TMJ disorders. This procedure may not be ideal as the TMJ is left without an important functional component. Tissue engineering is a promising approach for the creation of viable, effective implants. The first attempt to investigate TMJ disc cells on a biomaterial was conducted in 1991. The first TMJ tissue-engineered constructs to be tested biochemically and biomechanically were formed in 1994; however, in examining this study in retrospect, it is clear how little TMJ knowledge was available at that time. Within the last 10 to 15 years, multiple studies have investigated critical TMJ disc characteristics, and while this characterization is not complete, these data have created a solid foundation for tissue-engineering research. Thus, the last 5 years have yielded core studies investigating the principal elements of tissue engineering: scaffold, cell source, and biological/biomechanical stimuli. Although TMJ disc tissue engineering is still in its formative years, its future is quite promising. Key studies are now being conducted that will assist in the establishment of a solid TMJ disc tissue-engineering approach. As the challenges of tissue engineering are faced and met, the ultimate goal of creating a functional biological implant nears.

The Effect of Removal of the Disc on the Friction in the Temporomandibular Joint

PURPOSE

The amount of friction in the temporomandibular joint (TMJ) is dependent on the joint components, including the synovial fluid, disc, and articular surface cartilage. As friction in the TMJ is less than in other (discless) joints, we hypothesized that this is caused by the presence of the disc.

MATERIALS AND METHODS

The frictional coefficient of the TMJ was first measured in the intact porcine joint (n = 10). After the disc was removed the measurement of frictional coefficient was conducted again. Furthermore, the subsequent effects of loading duration and the application of hyaluronic acid (HA) were examined.

RESULTS

The mean frictional coefficient in the intact joint was 0.0177 (SD 0.0021). After disc resection it became 0.0361 (SD 0.0063). The frictional coefficient increased with the length of the preceding loading duration and exceeded 0.0635 (SD 0.0085) after 30 minutes. Subsequent application of HA resulted in a slight decrease of the frictional coefficient.

CONCLUSIONS

The presence of the disc reduces the amount of friction in the TMJ. This reduction is likely due to the role of the disc in reducing the amount of incongruity between the articular surfaces and in increasing synovial fluid lubrication.

Age-associated changes in viscoelastic properties of the bovine temporomandibular joint disc

To test the hypothesis that compressive properties of the temporomandibular joint (TMJ) disc change with age, we investigated its viscoelastic properties and stress-relaxation behavior under compression. Compressive stress-relaxation tests were performed in different regions of bovine discs of various ages. For each disc, specimens were derived from three different regions (anterior, central, and posterior). For four strain levels (5, 10, 15, and 20%), a stress-relaxation test was conducted over a 5-min period. Values of the instantaneous modulus, E(0), appeared to be larger in the anterior than in the posterior region of the disc, irrespective of age. The E(0) value increased with age, especially in the central region. Values of the relaxed modulus, E(R), also increased significantly with age. There were no regional differences in values of the relaxed modulus. Under stress-relaxation, the relaxation time became longer with age, especially in the posterior region. The results suggest that the compressive properties, instantaneous and relaxed moduli, increase with age, while the relaxation time becomes longer. This implies that the TMJ disc becomes harder with age. Furthermore, the compressive properties of the TMJ disc are region-specific. As a result of the harder disc, it is likely that the TMJ becomes more vulnerable to secondary damage, such as fracture and tissue degradation.

Stress-relaxation and microscopic dynamics of rabbit periodontal ligament

The aim of the present study was to examine the structural basis for the stress-relaxation behaviour of the periodontal ligament (PDL). Seventeen 4-month-old rabbits were used. A tooth-PDL-bone segment was cut in a rectangular prism from the incisor of a dissected mandible. The specimen was mounted in a testing machine built on a video stereomicroscope. Following preconditioning, each specimen was stretched to a deformation of 35 microm and then the deformation was kept constant for 300 s to obtain a stress-relaxation curve. Thereafter, stress-relaxation tests were repeated sequentially at deformations of 55, 75, and 95 microm. Polarised-light video-stereomicroscopic images of the specimens were simultaneously recorded and analysed with the stress-relaxation curves. The image analysis revealed that during stress-relaxation, the brightness of the birefringent fibres tended to initially increase rapidly and then do so gradually. There were negative correlations between the brightness and relaxation modulus at the four deformations. The decreases of normalised relaxation modulus for 300 s were less at greater deformation levels. The stress-relaxation process was well described by a function with three exponential decay terms and a constant. These findings suggest that during stress-relaxation of the PDL, the alignment of the collagen molecules and fibrils within the stretched fibres may occur, which could be driven by the strain energy imparted to the specimen on initial stretching.

Cell type and distribution in the porcine temporomandibular joint disc

PURPOSE

Surprisingly little is known about the cellular composition of the temporomandibular joint (TMJ) disc, which is a crucial piece of the puzzle in tissue engineering efforts. Toward this end, cell types were identified and quantified regionally in the TMJ disc.

MATERIALS AND METHODS

Porcine TMJ discs were examined by histology, electron microscopy, and immunohistochemistry. Histology consisted of hematoxylin and eosin staining to identify regional variation of cell type and cell numbers. Transmission electron microscopy was used to elucidate differences in organelle content and pericellular matrix between TMJ disc cells and chondrocytes from hyaline cartilage. Immunohistochemistry was used to assess the presence of smooth and skeletal muscle character in the TMJ disc.

RESULTS

The overall ratio of fibroblasts to chondrocyte-like cells in the TMJ disc was approximately 2.35 to 1, with the highest relative number of chondrocyte-like cells in the intermediate zone. Electron microscopy revealed distinct differences between TMJ disc chondrocyte-like cells and chondrocytes from hyaline cartilage with respect to organelles and the pericellular region. Immunostaining identified smooth muscle in the form of vessels, which were most prominent in the anterior band. Skeletal muscle was not observed.

CONCLUSION

The cells of the TMJ disc are distinctly different from cells of hyaline cartilage, and consequently should not be referred to as chondrocytes. TMJ disc cells are comprised of heterogeneously distributed subpopulations, with fibroblasts predominating over fibrochondrocytes.

A Surface–Regional and Freeze–Thaw Characterization of the Porcine Temporomandibular Joint Disc

The temporomandibular joint (TMJ) disc is a central element in several TMJ disorders. Tissue-engineered TMJ disc replacements may alleviate discomfort associated with TMJ disorders; however, prior to developing a replacement, a thorough understanding of the native disc must be attained. Toward this end, we developed an unconfined compression, incremental stress relaxation viscoelastic model which simultaneously incorporates the strain increment magnitude and total deformation in the stress relaxation solution. This multiple strain step model was fit to stress relaxation data from (i) 80 test sites from eight porcine TMJ discs for the purposes of a surface-regional characterization and (ii) 30 test sites from five porcine TMJ discs for the purposes of a freeze-thaw characterization. The model estimated viscoelastic parameters accurately and surface-regional variations were detected throughout the TMJ disc. Regionally, the medial and anterior regions have the largest relaxation moduli, and the posterior and anterior regions have the largest instantaneous moduli. The inferior surface was found to have higher instantaneous modulus values than the superior surface. Furthermore, material properties were retained over five freeze-thaw cycles. The results of this study allow for the creation of design and validation criteria for future engineering efforts and shed light on the disc's role in TMJ function and dysfunction.

Motivation, characterization, and strategy for tissue engineering the temporomandibular joint disc

The purpose of this review is to serve as the standard point of reference in guiding researchers investigating the tissue engineering of the temporomandibular joint (TMJ) disc. Tissue engineering of the TMJ disc is in its infancy, and currently there exists a gap between the tissue engineering community and the TMJ characterization community. The primary goal is to help bridge that gap by consolidating the characterization studies here as a reference to researchers attempting to tissue engineer the TMJ disc. A brief review of TMJ anatomy is provided, along with a description of relevant pathology, current treatment, and a rationale for engineering the TMJ disc. The biochemical composition and organization of the disc are reviewed, including glycosaminoglycan (GAG) and collagen content. The collagen of the disc is almost exclusively type I and primarily runs anteroposteriorly through the center and in a ringlike fashion around the periphery. The GAG content is approximately an order of magnitude less than that of hyaline cartilage, and although the distribution is not entirely clear, it seems as though chondroitin and dermatan sulfate are by far the primary GAGs. Cellular characterization and mechanical properties under compression, tension, and shear are reviewed as well. The cells of the disc are not chondrocytes, but rather resemble fibrocytes and fibrochondrocytes and may be of the same lineage. Mechanically, the disc is certainly anisotropic and nonhomogeneous. Finally, a review of efforts in tissue engineering and cell culture studies of the disc is provided and we close with a description of the direction we envision/propose for successful tissue engineering of the TMJ disc.

Three-dimensional finite element analysis of human temporomandibular joint with and without disc displacement during jaw opening

The aim of this study was to evaluate the differences of stress distribution in the temporomandibular joint (TMJ) disc during jaw opening between the subjects with and without internal derangement of TMJ (TMJ-ID). Three symptom-free volunteers and three symptomatic patients with anterior disc displacement were selected as normal and TMJ-ID subjects, respectively. For each subject, magnetic resonance images (MRI) were taken in the axial, sagittal and coronal directions. Using MRI taken, six three-dimensional finite element models of TMJ were developed. For each subject, the condylar movements during jaw opening were recorded and used as the loading condition for stress analysis. By comparing the calculated disc displacement to the measured one from MRI, the frictional coefficients were mu = 0.001 for the normal subjects, but mu = 0.01-0.001 for the TMJ-ID subjects. For the normal subjects, relatively high stresses were found at the anterior and lateral portions of the disc throughout jaw opening. In the connective tissues, the stress level was higher in the TMJ-ID than in the normal subjects. It is suggested that the disc displacement induces the change of stress distribution in the disc and the increase of frictional coefficients between articular surfaces, resulting in the secondary tissue damage.

Dynamic compressive properties of porcine temporomandibular joint disc

This study aimed to evaluate the effect of the strain frequency and amplitude on the compressive properties of the porcine temporomandibular joint disc and to determine the time-dependent changes associated with energy dissipation. Seven discs were used for compressive cycle tests, including various frequencies and magnitudes of compressive strain. Each experiment consisted of 25 cycles of loading and unloading. Hysteresis and the instantaneous and steady moduli were calculated. All specimens showed a clear hysteresis and repeatable stress-strain relationships within 19 cycles. The hysteresis at the initial cycle ranged between 35% and 62%, and gradually decreased in subsequent cycles. The instantaneous modulus became larger when the strain frequency and the strain amplitude increased. The steady modulus was approximately one-third of the instantaneous one. It was concluded that the disc has an energy-dissipating function during dynamic compression.