Rolling properties of rGPIbalpha-conjugated phospholipid vesicles with different membrane flexibilities on vWf surface under flow conditions

Intravenous Hemostats: Foundation, Targeting, and Controlled-Release

Uncontrollable blood loss is the greatest cause of mortality in prehospital patients and the main source of disability and death in hospital care. Compared with external hemostats, intravenous hemostats are more appropriate for preventing and treating uncontrolled bleeding in vivo and large bleeding on the body surface. This Review initially establishes intravenous hemostats' response basis, including the coagulation mechanism, fibrinolytic pathway, and protein corona. Second, the study of advancement of intravenous hemostat targeting was expanded from two perspectives, cellular hemostatic agents and synthetic hemostatic agents. Meanwhile, after discussing the progress of controlled-release intravenous hemostats with platelets as the stimuli, this Review offers insight into the possibility of controlled-release intravenous hemostats with microenvironment as the stimuli, combining the studies of controlled-release targeted thrombolysis.

Platelet-inspired nanomedicine in hemostasis thrombosis and thromboinflammation

Platelets are anucleate cell-fragments derived predominantly from megakaryocytes in the bone marrow and released in the blood circulation, with a normal count of 150 000-40 000 per μl and a lifespan of approximately 10 days in humans. A primary role of platelets is to aid in vascular injury site-specific clot formation to stanch bleeding, termed hemostasis. Platelets render hemostasis by a complex concert of mechanisms involving platelet adhesion, activation and aggregation, coagulation amplification, and clot retraction. Additionally, platelet secretome can influence coagulation kinetics and clot morphology. Therefore, platelet defects and dysfunctions result in bleeding complications. Current treatment for such complications involve prophylactic or emergency transfusion of platelets. However, platelet transfusion logistics constantly suffer from limited donor availability, challenges in portability and storage, high bacterial contamination risks, and very short shelf life (~5 days). To address these issues, an exciting area of research is focusing on the development of microparticle- and nanoparticle-based platelet surrogate technologies that can mimic various hemostatic mechanisms of platelets. On the other hand, aberrant occurrence of the platelet mechanisms lead to the pathological manifestation of thrombosis and thromboinflammation. The treatments for this are focused on inhibiting the mechanisms or resolving the formed clots. Here, platelet-inspired technologies can provide unique platforms for disease-targeted drug delivery to achieve high therapeutic efficacy while avoiding systemic side-effects. This review will provide brief mechanistic insight into the role of platelets in hemostasis, thrombosis and thromboinflammation, and present the current state-of-art in the design of platelet-inspired nanomedicine for applications in these areas.

Bioinspired artificial platelets: past, present and future

Platelets are anucleate blood cells produced from megakaryocytes predominantly in the bone marrow and released into blood circulation at a healthy count of 150,000-400,00 per μL and circulation lifespan of 7-9 days. Platelets are the first responders at the site of vascular injury and bleeding, and participate in clot formation via injury site-specific primary mechanisms of adhesion, activation and aggregation to form a platelet plug, as well as secondary mechanisms of augmenting coagulation via thrombin amplification and fibrin generation. Platelets also secrete various granule contents that enhance these mechanisms for clot growth and stability. The resultant clot seals the injury site to stanch bleeding, a process termed as hemostasis. Due to this critical role, a reduction in platelet count or dysregulation in platelet function is associated with bleeding risks and hemorrhagic complications. These scenarios are often treated by prophylactic or emergency transfusion of platelets. However, platelet transfusions face significant challenges due to limited donor availability, difficult portability and storage, high bacterial contamination risks, and very short shelf life (~5-7 days). These are currently being addressed by a robust volume of research involving reduced temperature storage and pathogen reduction processes on donor platelets to improve shelf-life and reduce contamination, as well as bioreactor-based approaches to generate donor-independent platelets from stem cells in vitro. In parallel, a complementary research field has emerged that involves the design of artificial platelets utilizing biosynthetic particle constructs that functionally emulate various hemostatic mechanisms of platelets. Here, we provide a comprehensive review of the history and the current state-of-the-art artificial platelet approaches, along with discussing the translational opportunities and challenges.

Bioinspired artificial platelets for transfusion applications in traumatic hemorrhage

Among blood components, platelets (PLTs) present the toughest logistic challenges in transfusion due to limited availability, difficult portability and storage, high contamination risks, and very short shelf life (approx. 5 days). Robust research efforts are being directed to develop biologic PLTs in vitro as well as design biosynthetic and artificial PLT technologies that can potentially resolve these challenges to allow adequate availability and timely transfusion to improve survival in trauma.

Novel platelet products under development for the treatment of thrombocytopenia or acute hemorrhage

Controlling hemorrhage has been a focus of survival since man recognized that the loss of blood led to death. Papyri from 1600 BCE describe methods for hemorrhage control including; direct pressure, ligature and the use of sutures. Multiple studies have demonstrated the survival advantage of early transfusion of whole blood or red cells and plasma. The added survival impact of early transfusion of platelets was recently reported in a substudy of the prospective Pragmatic, Randomized Optimal Platelet and Plasma Ratios (PROPPR) trial. Early transfusion of platelets demonstrated a statistically significant survival benefit at 24 h and 30 days post-injury. [1] Platelet availability is limited due to the short shelf life (5-7 days) and storage requirements (room temperature with constant agitation). Providing platelets or platelet derived products for prehospital treatment and to rural and some urban hospitals is an unmet medical need. The interest in novel and alternative platelet products has grown over the past decade and the status of novel platelet products is presented herein. Development, approval, and distribution of hemostatically effective approved platelet products for prehospital use and routine stockage in rural and urban centers could significantly increase survival rates in bleeding patients.

Benchmarking Bicontinuous Nanospheres against Polymersomes for in Vivo Biodistribution and Dual Intracellular Delivery of Lipophilic and Water-Soluble Payloads

Bicontinuous nanospheres (BCNs) are polymeric analogs to lipid cubosomes, possessing cubic liquid crystalline phases with high internal surface area, aqueous channels for loading hydrophilic molecules, and high hydrophobic volume for lipophilic payloads. Primarily due to difficulties in scalable and consistent fabrication, neither controlled delivery of payloads via BCNs nor their organ or cellular biodistributions following in vivo administration have been demonstrated or characterized. We have recently validated flash nanoprecipitation as a rapid method of assembling uniform monodisperse 200-300 nm diameter BCNs from poly(ethylene glycol) -b-poly(propylene sulfide) (PEG -b-PPS) co-polymers. Here, we compare these BCNs both in vitro and in vivo to 100 nm PEG -b-PPS polymersomes (PSs), which have been well characterized as nanocarriers for controlled delivery applications. Using a small molecule fluorophore and a fluorescently tagged protein as respective lipophilic and water-soluble model cargos, we demonstrate that BCNs can achieve significantly higher encapsulation efficiencies for both payloads on a per unit mass basis. At time points of 4 and 24 h after intravenous administration to mice, we found significant differences in organ-level uptake between BCNs and PSs, with BCNs showing reduced accumulation in the liver and increased uptake in the spleen. Despite these organ-level differences, BCNs and PSs displayed strikingly similar uptake profiles by immune cell populations in vitro and in the liver, spleen, and blood, as assayed by flow cytometry. In conclusion, we have found PEG -b-PPS BCNs to be well suited for dual loading and delivery of molecular payloads, with a favorable organ biodistribution and high cell uptake by therapeutically relevant immune cell populations.

Biomaterials and Advanced Technologies for Hemostatic Management of Bleeding

Bleeding complications arising from trauma, surgery, and as congenital, disease-associated, or drug-induced blood disorders can cause significant morbidities and mortalities in civilian and military populations. Therefore, stoppage of bleeding (hemostasis) is of paramount clinical significance in prophylactic, surgical, and emergency scenarios. For externally accessible injuries, a variety of natural and synthetic biomaterials have undergone robust research, leading to hemostatic technologies including glues, bandages, tamponades, tourniquets, dressings, and procoagulant powders. In contrast, treatment of internal noncompressible hemorrhage still heavily depends on transfusion of whole blood or blood's hemostatic components (platelets, fibrinogen, and coagulation factors). Transfusion of platelets poses significant challenges of limited availability, high cost, contamination risks, short shelf-life, low portability, performance variability, and immunological side effects, while use of fibrinogen or coagulation factors provides only partial mechanisms for hemostasis. With such considerations, significant interdisciplinary research endeavors have been focused on developing materials and technologies that can be manufactured conveniently, sterilized to minimize contamination and enhance shelf-life, and administered intravenously to mimic, leverage, and amplify physiological hemostatic mechanisms. Here, a comprehensive review regarding the various topical, intracavitary, and intravenous hemostatic technologies in terms of materials, mechanisms, and state-of-art is provided, and challenges and opportunities to help advancement of the field are discussed.

Stabilizers influence drug-polymer interactions and physicochemical properties of disulfiram-loaded poly-lactide-co-glycolide nanoparticles

Aim:

Stabilizers are known to be an integral component of polymeric nanostructures. Ideally, they manipulate physicochemical properties of nanoparticles. Based on this hypothesis, we demonstrated that disulfiram (drug) and Poly-lactide-co-glycolide (polymer) interactions and physicochemical properties of their nanoparticles formulations are significantly influenced by the choice of stabilizers.

Methodology:

Electron microscopy, differential scanning calorimetry, x-ray diffraction, Raman spectrum analysis, isothermal titration calorimetry and in silico docking studies were performed.

Results & discussion:

Polysorbate 80 imparted highest crystallinity while Triton-X 100 imparted highest rigidity, possibly influencing drug bioavailability, blood-retention time, cellular uptake and sustained drug release. All the molecular interactions were hydrophobic in nature and entropy driven. Therefore, polymeric nanoparticles may be critically manipulated to streamline the passive targeting of drug-loaded nanoparticles.

Polymeric nanoparticles are futuristic drug-delivering platforms that have many potential advantages above conventional drug-delivery tools. They are mainly composed of a polymer, stabilizer and the therapeutic ingredient. A number of researches are on-going to improvise various characteristics of polymeric nanoparticles, in order to enhance its efficacy. The current study is one such domain where we emphasize on identifying potential stabilizing factors that are involved in nanoparticles formation and their drug entrapment and release properties.

Bio-inspired nanomedicine strategies for artificial blood components

Blood is a fluid connective tissue where living cells are suspended in noncellular liquid matrix. The cellular components of blood render gas exchange (RBCs), immune surveillance (WBCs) and hemostatic responses (platelets), and the noncellular components (salts, proteins, etc.) provide nutrition to various tissues in the body. Dysfunction and deficiencies in these blood components can lead to significant tissue morbidity and mortality. Consequently, transfusion of whole blood or its components is a clinical mainstay in the management of trauma, surgery, myelosuppression, and congenital blood disorders. However, donor-derived blood products suffer from issues of shortage in supply, need for type matching, high risks of pathogenic contamination, limited portability and shelf-life, and a variety of side-effects. While robust research is being directed to resolve these issues, a parallel clinical interest has developed toward bioengineering of synthetic blood substitutes that can provide blood's functions while circumventing the above problems. Nanotechnology has provided exciting approaches to achieve this, using materials engineering strategies to create synthetic and semi-synthetic RBC substitutes for enabling oxygen transport, platelet substitutes for enabling hemostasis, and WBC substitutes for enabling cell-specific immune response. Some of these approaches have further extended the application of blood cell-inspired synthetic and semi-synthetic constructs for targeted drug delivery and nanomedicine. The current study provides a comprehensive review of the various nanotechnology approaches to design synthetic blood cells, along with a critical discussion of successes and challenges of the current state-of-art in this field. WIREs Nanomed Nanobiotechnol 2017, 9:e1464. doi: 10.1002/wnan.1464 For further resources related to this article, please visit the WIREs website.

Non-affinity factors modulating vascular targeting of nano- and microcarriers

Particles capable of homing and adhering to specific vascular biomarkers have potential as fundamental tools in drug delivery for mediation of a wide variety of pathologies, including inflammation, thrombosis, and pulmonary disorders. The presentation of affinity ligands on the surface of a particle provides a means of targeting the particle to sites of therapeutic interest, but a host of other factors come into play in determining the targeting capacity of the particle. This review presents a summary of several key considerations in nano- and microparticle design that modulate targeted delivery without directly altering epitope-specific affinity. Namely, we describe the effect of factors in definition of the base carrier (including shape, size, and flexibility) on the capacity of carriers to access, adhere to, and integrate in target biological milieus. Furthermore, we present a summary of fundamental dynamics of carrier behavior in circulation, taking into account interactions with cells in circulation and the role of hemodynamics in mediating the direction of carriers to target sites. Finally, we note non-affinity aspects to uptake and intracellular trafficking of carriers in target cells. In total, recent findings presented here may offer an opportunity to capitalize on mitigating factors in the behavior of ligand-targeted carriers in order to optimize targeting.

Synthetic Strategies for Engineering Intravenous Hemostats

While there are currently many well-established topical hemostatic agents for field administration, there are still limited tools to staunch bleeding at less accessible injury sites. Current clinical methods to restore hemostasis after large volume blood loss include platelet and clotting factor transfusion, which have respective drawbacks of short shelf life and risk of viral transmission. Therefore, synthetic hemostatic agents that can be delivered intravenously and encourage stable clot formation after localizing to sites of vascular injury are particularly appealing. In the past three decades, platelet substitutes have been prepared using drug delivery vehicles such as liposomes and PLGA nanoparticles that have been modified to mimic platelet properties. Additionally, structural considerations such as particle size, shape, and flexibility have been addressed in a number of reports. Since platelets are the first responders after vascular injury, platelet substitutes represent an important class of intravenous hemostats under development. More recently, materials affecting fibrin formation have been introduced to induce faster or more stable blood clot formation through fibrin cross-linking. Fibrin represents a major structural component in the final blood clot, and a fibrin-based hemostatic mechanism acting downstream of initial platelet plug formation may be a safer alternative to platelets to avoid undesired thrombotic activity. This Review explores intravenous hemostats under development and strategies to optimize their clotting activity.

Ultrastructural analysis of thrombin-induced interaction between human platelets and liposomes carrying fibrinogen γ-chain dodecapeptide as a synthetic platelet substitute

BACKGROUND

The dodecapeptide HHLGGAKQAGDV (H12) in the carboxy-terminus of the fibrinogen γ-chain is a specific binding site of the ligand for platelet GPIIb/IIIa complex. We have evaluated liposomes carrying fibrinogen γ-chain dodecapeptide as a synthetic platelet substitute.

OBJECTIVES

We examined the interaction between human platelets and H12-liposomes during thrombin-induced activation using flow cytometry and electron microscopy (EM).

METHODS AND RESULTS

After thrombin-activation, a remarkable time-dependent increase in binding of the H12-liposomes to platelets was found by flow cytometry. A large-sized swollen open canalicular system (OCS) was observed in the spheroidal platelets from 60 sec to 5 min after thrombin-activation, but intact H12-liposomes were not evident by conventional EM. Cryoultramicrotomy and immunogold staining with anti-H12 antibody were successful in identifying the liposomes; they appeared as small particles with a unit membrane around 0.2 to 0.4 μm in diameter, and gold labels representing H12 were distributed homogeneously on the surface. Abundant H12-liposomes were localized not only on the surface membrane but also in the lumen of the large-sized swollen OCS in the platelets at 60 sec after thrombin-activation. The formation of the large-sized swollen OCS was inhibited by pre-incubation with unbound H12, EDTA or anti-GPIIb/IIIa antibody. In thrombin-induced platelet aggregates we observed electron-transparent areas between adherent platelets, in which abundant H12-liposomes were distributed.

CONCLUSIONS

We demonstrate morphologically that H12-liposomes bind to thrombin-activated platelets and accumulate between adherent platelets like fibrinogen, leading to large-scale aggregation.

Coarse-grained modeling study of nonpeptide RGD ligand density and PEG molecular weight on the conformation of poly(γ-glutamyl-glutamate) paclitaxel conjugates

Molecular shape, flexibility, and surface hydrophilicity are thought to influence the ability of nanoparticles to cross biological barriers during drug delivery. In this study, coarse-grained (CG) molecular dynamics (MD) simulations were used to study these properties of a polymer-drug construct in potential clinical development: poly(γ-glutamyl-glutamate)-paclitaxel-poly(ethylene glycol) nonpeptide RGD (PGG-PTX-PEG-npRGD), a linear glutamyl-glutamate polymer with paclitaxel and poly(ethylene glycol)-nonpeptide RGD side groups. It was hypothesized that the PEG molecular weight (MW) (500 Da; 1,000 Da; and 2,000 Da) and nonpeptide RGD ligand density (4, 8, 12, and 16 per molecule), respectively, may have advantageous effects on the shape, flexibility, and surface hydrophilicity of PGG-PTX-PEG-npRGD. Circular dichroism spectroscopy was used to suggest initial structures for the all-atom (AA) models of PGG-PTX-PEG-npRGD, which were further converted to CG models using a commercially available mapping algorithm. Due to its semi-flexibility, PGG-PTX-PEG-npRGD is not limited to one specific conformation. Thus, CG MD simulations were run until statistical equilibrium, at which PGG-PTX-PEG-npRGD is represented as an ensemble of statistically similar conformations. The size of a PGG-PTX-PEG-npRGD molecule is not affected by the PEG MW or the nonpeptide RGD density, but higher PEG MW results in increased surface density of a PGG-PTX-PEG-npRGD molecule. Most PGG-PTX-PEG-npRGD shapes are globular, although filamentous shapes were also observed in the PEG500 and PEG1000 molecules. PEG500 and PEG1000 molecules are more flexible than PEG2000 systems. A higher presence of npRGD ligands results in decrease surface hydrophilicity of PGG-PTX-PEG-npRGD. These results indicate that the PGG-PTX-PEG1000-npRGD₄ and PGG-PTX-PEG1000-npRGD₈ molecules are the most efficacious candidates and are further recommended for experimental preclinical studies.

Release abilities of adenosine diphosphate from phospholipid vesicles with different membrane properties and their hemostatic effects as a platelet substitute

We have constructed phospholipid vesicles with hemostatic activity as a platelet substitute. The vesicles were conjugated with a dodecapeptide (HHLGGAKQAGDV, H12), which is a fibrinogen γ-chain carboxy-terminal sequence (γ400-411). We have recently exploited these vesicles as a potential drug delivery system by encapsulation of adenosine 5'-diphosphate (ADP) (H12-(ADP)-vesicles). Here we explore the relationship between the ADP release from H12-(ADP)-vesicles with different membrane properties and their hemostatic effects. In total, we prepared five kinds of H12-(ADP)-vesicles with different lamellarities and membrane flexibilities. By radioisotope-labeling, we directly show that H12-(ADP)-vesicles were capable of augmenting platelet aggregation by releasing ADP in an aggregation-dependent manner. The amount of ADP released from the vesicles was dependent on their membrane properties. Specifically, the amount of ADP released increased with decreasing lamellarity and tended to increase with increasing membrane flexibility. Our in vivo results clearly demonstrated that H12-(ADP)-vesicles with the ability to release ADP exert considerable hemostatic action in terms of correcting prolonged bleeding time in a busulphan-induced thrombocytopenic rat model. We propose a recipe to control the hemostatic abilities of H12-(ADP)-vesicles by modulating ADP release based on membrane properties. We believe that this concept will be invaluable to the development of platelet substitutes and other drug carriers.

Novel platelet substitutes: disk-shaped biodegradable nanosheets and their enhanced effects on platelet aggregation

We have studied biocompatible spherical carriers carrying a dodecapeptide, HHLGGAKQAGDV (H12), on their surface as platelet substitutes. This peptide is a fibrinogen γ-chain carboxy-terminal sequence (γ400-411) and specifically recognizes the active form of glycoprotein IIb/IIIa on activated platelets. Our purpose is to assess the possibility of making a novel platelet substitute consisting of disk-shaped nanosheets having a large contact area for the targeting site, rather than conventional small contact area spherical carriers. The H12 peptide was conjugated to the surface of the free-standing nanosheets made of biodegradable poly(d,l-lactide-co-glycolide) (PLGA). These H12-PLGA nanosheets were fabricated onto 3 μm disk-shaped patterned hydrophobic octadecyl regions on a SiO(2) substrate. By way of comparison, spherical H12-PLGA microparticles with the same surface area and conjugation number of H12 were also prepared. The resulting H12-PLGA nanosheets specifically interacted with the activated platelets adhered on the collagen surface at twice the rate of the H12-PLGA microparticles under flow conditions, and showed platelet thrombus formation in a two-dimensional spreading manner. Thus, H12-PLGA nanosheets might be a suitable candidate novel platelet alternative substitute for infused human platelet concentrates for the treatment of bleeding in patients with severe thrombocytopenia.

Factors affecting the clearance and biodistribution of polymeric nanoparticles

Nanoparticle (NP) drug delivery systems (5−250 nm) have the potential to improve current disease therapies because of their ability to overcome multiple biological barriers and releasing a therapeutic load in the optimal dosage range. Rapid clearance of circulating nanoparticles during systemic delivery is a critical issue for these systems and has made it necessary to understand the factors affecting particle biodistribution and blood circulation half-life. In this review, we discuss the factors which can influence nanoparticle blood residence time and organ specific accumulation. These factors include interactions with biological barriers and tunable nanoparticle parameters, such as composition, size, core properties, surface modifications (pegylation and surface charge), and finally, targeting ligand functionalization. All these factors have been shown to substantially affect the biodistribution and blood circulation half-life of circulating nanoparticles by reducing the level of nonspecific uptake, delaying opsonization, and increasing the extent of tissue specific accumulation.

Development of biodegradable nanosheets as nanoadhesive plaster

Sheet-shaped carriers having both obverse and reverse surfaces (thus, a large contact area for targeting a site and adhesive properties without any chemical cross-linker onto tissue surface) have several advantages as surgical dressings. These advantages include active targeting over spherically shaped carriers, which thus have an extremely small contact area for targeting sites. Here, we propose a novel methodology for preparation of a free-standing, ultra-thin, and biocompatible polymer nanosheet having heterosurfaces, fabricated through macromolecular assembly. In the context of biomedical applications, the targeted properties include injectable sheet-shaped drug carriers having precisely controlled size by exploiting micropatterned substrate, and giant polymer nanosheets composed of biocompatible polysaccharides. A huge aspect ratio, in excess of 106, is particularly applicable for novel surgical dressings. These biocompatible polymer nanosheets having heterosurfaces can thus be regarded as new biomaterials for minimally invasive treatment.

Prolonged hemostatic ability of polyethylene glycol?modified polymerized albumin particles carrying fibrinogen ?-chain dodecapeptide

BACKGROUND

Second-generation platelet (PLT) substitutes for treatment of bleeding were studied and the focus was on a dodecapeptide, HHLGGAKQAGDV (H12), which is a fibrinogen gamma-chain carboxy-terminal sequence (gamma 400-411) and exists only in a fibrinogen domain.

STUDY DESIGN AND METHODS

H12 was conjugated to the surface of polymerized albumin particles (polyAlb) modified with polyethylene glycol (PEG) chains to produce biocompatible particles (H12-PEG-polyAlb) that had prolonged blood circulation t((1/2)) and were more stable in vitro and in vivo compared with H12-polyAlb (not modified with PEG). H12-PEG-polyAlb was administered intravenously into thrombocytopenic rats and the t((1/2)) of the particles and the tail bleeding time were measured to evaluate the prolongation in the hemostatic effect.

RESULTS

H12-PEG-polyAlb particles modified with PEG prolonged the t((1/2)) and maintained specific binding ability to activated PLTs. The particles dose dependently shortened the tail bleeding time of thrombocytopenic rats 6 hours after injection.

CONCLUSION

H12-PEG-polyAlb may be a suitable candidate for treatment of bleeding into thrombocytopenic patients as an alternative to PLT concentrate transfusion.

New strategy of platelet substitutes for enhancing platelet aggregation at high shear rates: cooperative effects of a mixed system of fibrinogen γ-chain dodecapeptide- or glycoprotein Ibα-conjugated latex beads under flow conditions

To construct platelet substitutes that have hemostatic properties over a wide range of shear rates, we used fibrinogen gamma-chain carboxy-terminal sequence HHLGGAKQAGDV (H12), which recognizes activated platelets at low shear rates, and a recombinant water-soluble moiety of the platelet glycoprotein (rGPIbalpha), which recognizes von Willebrand factor at high shear rates. Three kinds of samples were prepared for this purpose: H12-conjugated latex beads (H12-latex beads), rGPIbalpha-latex beads, and H12/rGPIbalpha-latex beads. These samples were evaluated in thrombocytopenia-imitation blood at various flow conditions. Based on ADP-induced platelet aggregation studies, the H12-latex beads significantly enhanced platelet aggregation via H12 binding with GPIIb/IIIa activated on the surface of activated platelets, whereas the rGPIbalpha-latex beads did not support platelet aggregation. In the case of the H12/rGPIbalpha-latex beads, the function of H12 was suppressed by steric hindrance from the larger rGPIbalpha bound to the latex bead. A mixture of the H12-latex beads and the rGPIbalpha-latex beads adhered to a collagen surface over a wide range of shear rates. In particular, at high shear rates, a cooperative effect was observed in the enhancement of platelet thrombus formation compared with H12-latex beads or rGPIbalpha-latex beads alone. We propose that a mixed system of H12- and rGPIbalpha-conjugated nanoparticles is a more effective platelet substitute than each of the beads used alone and has enhanced platelet aggregation properties.

An assessment of the effects of shell cross-linked nanoparticle size, core composition, and surface PEGylation on in vivo biodistribution

Amphiphilic core-shell nanoparticles have drawn considerable interest in biomedical applications. The precise control over their physicochemical parameters and the ability to attach various ligands within specific domains suggest shell cross-linked (SCK) nanoparticles may be used as multi-/polyvalent scaffolds for drug delivery. In this study, the biodistribution of four SCKs, differing in size, core composition, and surface PEGylation, was evaluated. To facilitate in-vivo tracking of the SCKs, the positron-emitting radionuclide copper-64 was used. By using biodistribution and microPET imaging approaches, we found that small diameter (18 nm) SCKs possessing a polystyrene core showed the most favorable biological behavior in terms of prolonged blood retention and low liver accumulation. The data demonstrated that both core composition, which influenced the SCK flexibility and shape adaptability, and hydrodynamic diameter of the nanoparticle play important roles in the respective biodistributions. Surface modification with poly(ethylene glycol) (PEG) had no noticeable effects on SCK behavior.

Hemostatic effects of fibrinogen gamma-chain dodecapeptide-conjugated polymerized albumin particles in vitro and in vivo

BACKGROUND

Prototypes of platelet (PLT) substitutes have been studied and the focus was on a dodecapeptide, HHLGGAKQAGDV (H12), which is a fibrinogen gamma-chain carboxy-terminal sequence (gamma 400-411) and exists only in the fibrinogen domain.

STUDY DESIGN AND METHODS

H12 was conjugated to the surface of polymerized albumin particles (polyAlb) as biocompatible and biodegradable particles with a mean diameter of 260 +/- 60 nm, and the hemostatic ability of H12-conjugated polyAlb (H12-polyAlb) under flow conditions and thrombocytopenic rats have been studied.

RESULTS

H12-polyAlb enhanced the in vitro thrombus formation of activated PLTs on a collagen-immobilized plate when exposed to the flowing thrombocytopenic imitation blood. Furthermore, the analysis of the tail bleeding time of rats that were made thrombocytopenic by busulfan injection showed that H12-polyAlb had a hemostatic effect. Based on the bleeding time and the amount injected, the hemostatic capacity of 20 H12-polyAlb was estimated to correspond to that of one PLT.

CONCLUSION

These results were important first steps toward the development of PLT substitutes and indicated that H12-polyAlb may be a suitable candidate for an alternative to human PLT concentrates transfused into thrombocytopenic patients in the future.

Function of fibrinogen γ-chain dodecapeptide-conjugated latex beads under flow

In order to perform a fundamental study of platelet substitutes, novel particles that bound to activated platelets were prepared using two oligopeptides conjugated to latex beads. The oligopeptides were CHHLGGAKQAGDV (H12), which is a fibrinogen gamma-chain carboxy-terminal sequence (gamma 400-411), and CGGRGDF (RGD), which contains a fibrinogen alpha-chain sequence (alpha 95-98 RGDF). Both peptides contained an additional amino-terminal cysteine to enable conjugation. Human serum albumin was adsorbed onto the surface of latex beads (average diameter 1microm) and pyridyldisulfide groups were chemically introduced into the adsorbed protein. H12 or RGD peptides were then chemically linked to the modified surface protein via disulfide linkages. H12- or RGD-conjugated latex beads prepared in this way enhanced the in vitro thrombus formation of activated platelets on collagen-immobilized plates under flowing thrombocytopenic-imitation blood. Based on the result of flow cytometric analyses of agglutination, PAC-1 binding, antiP-selectin antibody binding, and annexin V binding, the H12-conjugated latex beads showed minimal interaction with non-activated platelets. These results indicate the excellent potential of H12-conjugated particles as a candidate for a platelet substitute.

Hemostatic effects of polymerized albumin particles bearing rGPIa/IIa in thrombocytopenic mice

The recombinant fragment of the platelet membrane glycoprotein Ia/IIa (rGPIa/IIa) was conjugated to the polymerized albumin particles (polyAlb) with the average diameter of 180 nm. The intravenous administration of rGPIa/IIa-polyAlb to thrombocytopenic mice ([platelet] = 2.1+/-0.3 x 10(5) particles/ microL) with three doses of ca. 2.4 x 10(10), 7.2 x 10(10), and 2.4 x 10(11)particles/kg, respectively, significantly reduced their bleeding time to 426+/-71, 378+/-101, and 337+/-46 s, respectively, whereas that of the control groups (PBS) was 730+/-198 s. The injection of rGPIa/IIa-polyAlb (2.4 x 10(11)particles/kg) was approximately equal to the effect of the injection of the mouse platelets at a dose of 2.0 x 10(10) particles/kg. It was confirmed that rGPIa/IIa-polyAlb had a recognition ability against collagen and could contribute to the hemostasis in the thrombocytopenic mice as a platelet substitute.