Electrocatalytic properties of vitamin B12 towards oxidation and reduction of nitric oxide

Boron-Modulated Electronic-Configuration Tuning of Cobalt for Enhanced Nitric Oxide Fixation to Ammonia

Electrocatalytic nitric oxide reduction (eNORR) to ammonia (NH3) provides an environmental route to alleviate NO pollution and yield great-value chemicals. The evolution of eNORR has been primarily hindered, however, by the poor reaction kinetics and low solubility of the NO in aqueous electrolytes. Herein, we have rationally designed a cobalt-based composite with a heterostructure as a highly efficient eNORR catalyst. In addition, by integrating boron to modulate the electronic structure, the catalyst CoB/Co@C delivered a significant NH3 yield of 315.4 μmol h-1 cm-2 for eNORR and an outstanding power density of 3.68 mW cm-2 in a Zn-NO battery. The excellent electrochemical performance of CoB/Co@C is attributed to the enrichment of NO by cobalt and boron dual-site adsorption and fast charge-transfer kinetics. It is demonstrated that the boron is pivotal in the enhancement of NO, the suppression of hydrogen evolution, and Co oxidation to boost eNORR performance.

Electrochemical Synthesis of High-Nitrogen Materials and Energetic Materials

Electrochemical synthesis is a valuable method for the preparation of molecules. It is innately eco-friendly, as potentially hazardous oxidation and reduction agents are replaced with electrochemical potentials. Electrochemistry is commonly applied globally in the synthesis of numerous chemicals, but the energetic materials field lags in this regard. In this review, we endeavor to cover the entire history of synthetic electrochemistry for the preparation of energetic materials and detail the electrochemical transformations of high-nitrogen materials that are relevant for the preparation of new energetic molecules. We hope this review serves as a starting point to inform those involved in synthetic energetic materials chemistry, and those interested in other applications of high-nitrogen molecules, about the environmentally friendly electrochemical methods available for such compounds.

Selective electrochemical reduction of nitric oxide to hydroxylamine by atomically dispersed iron catalyst

Electrocatalytic conversion of nitrogen oxides to value-added chemicals is a promising strategy for mitigating the human-caused unbalance of the global nitrogen-cycle, but controlling product selectivity remains a great challenge. Here we show iron-nitrogen-doped carbon as an efficient and durable electrocatalyst for selective nitric oxide reduction into hydroxylamine. Using in operando spectroscopic techniques, the catalytic site is identified as isolated ferrous moieties, at which the rate for hydroxylamine production increases in a super-Nernstian way upon pH decrease. Computational multiscale modelling attributes the origin of unconventional pH dependence to the redox active (non-innocent) property of NO. This makes the rate-limiting NO adsorbate state more sensitive to surface charge which varies with the pH-dependent overpotential. Guided by these fundamental insights, we achieve a Faradaic efficiency of 71% and an unprecedented production rate of 215 μmol cm-2 h-1 at a short-circuit mode in a flow-type fuel cell without significant catalytic deactivation over 50 h operation.

Vitamin B12-Immobilized Graphene Oxide for Efficient Electrocatalytic Carbon Dioxide Reduction Reaction

A naturally occurring water-soluble cobalt-complex cyanocobalamin (Vitamin B12) has been identified as a new and efficient electrocatalyst for the CO₂ -to-CO reduction reaction in aqueous solution. Heterogeneous B12-electrocatalysts prepared by a simple electrochemical immobilization technique on graphene-oxide (GO)-modified glassy carbon and carbon paper (CP) electrodes, without any non-degradable polymer-binders, showed a highly stable and well-defined surface-confined redox peak at E'=-0.138 V vs. RHE with a surface-excess value, Γ_B12 =4.28 nmol cm^-2 . This new electrocatalyst exhibits 93 % Faradaic efficiency for CO₂ -to-CO conversion at an electrolysis potential, -0.882 V vs. RHE (an optimal condition) with a high current density, 29.4 mA cm^-2 and turn-over-frequency value, 5.2 s^-1 , without any surface-fouling problem, in 0.5 m KHCO₃ . In further, it follows an eco-friendly, sustainable and water-based approach with the involvement of biodegradable and non-toxic chemicals/materials like B12, GO and CP.

Enhanced electro-reduction of NO to NH3 on Pt cathode at electro-scrubber

Besides cheaper electrodes used in NH₃ product formation during NO degradation by mediated electrochemical reduction (MER), a specific electrode that can perform direct electrochemical reduction (DER) and MER of NO is an added advantage. In the present study, a Pt electrode was used to examine NO degradation through NH₃ formation during the electro-scrubbing process. Initially, the DER of NO was tested on a Pt electrode to determine if the DER of NO is possible. The NO degradation by only absorption, DER on Pt, and MER using electrogenerated [Ni(I)(CN)₄]^3- showed that a combination of DER and MER increased the NO degradation efficiency. In addition, the online FTIR spectra obtained under different conditions showed that the product formed was NH₃, either from the DER or MER during electro-scrubbing. The feed gas flow rate and feed concentration results of NH₃ formation revealed an additional chemical reaction that was influenced by the Pt electrode in addition to the DER and MER processes. Furthermore, the degradation efficiency of NO when using the Pt electrode increased to 90% compared to that of the Cu electrode (65%), which showed that Pt follows a combination of DER and MER processes. Based on the gas-phase FTIR results of NH₃ formation during NO degradation, higher NH₃ production (0.32 mg/h) was obtained when using a Pt electrode than that using a Cu electrode (0.21 mg/h), highlighting the specificity of the Pt electrode in NH₃ formation during the degradation of NO gas.

High-performance liquid chromatography method for the simultaneous determination of thiamine hydrochloride, pyridoxine hydrochloride and cyanocobalamin in pharmaceutical formulations using coulometric electrochemical and ultraviolet detection

The method for the simultaneous determination of thiamine hydrochloride, pyridoxine hydrochloride and cyanocobalamin by high-performance liquid chromatography (HPLC) with coulometric electrochemical and UV detections is presented. The retention time of vitamins was repeatedly determined by isocratic elution using 0.05 M phosphate buffer-10% methanol and 0.018 M trimethylamine (1 ml min(-1), pH 3.55) as mobile phase with the Supelco LC 18 column 5 microm (25 cm x 4.6 mm). The specificity of the method was demonstrated by the retention characteristics, coulometric electrochemical and UV detection. The limits of detection of thiamine, pyridoxine and cyanocobalamin were: 9.2, 2.7 and 0.08 ng/ml, respectively. The method was characterized also by wide concentration range, high sensitivity and good accuracy (99.6-102.7%). The repeatability of the method was evaluated at different level of concentration of vitamins and the relative standard deviation was below 4.5%. The method was successfully applied for the quantification of Vitamins B1, B6 and B12 in pharmaceutical preparations and dietary supplements.

Electrochemical Reduction of NO by Hemin Adsorbed at Pyrolitic Graphite

The mechanism of the electrochemical reduction of nitric oxide (NO) by hemin adsorbed at pyrolitic graphite was investigated. The selectivity of NO reduction was probed by combining the rotating ring disk electrode (RRDE) technique with a newly developed technique called on-line electrochemical mass spectroscopy (OLEMS). These techniques show that NO reduction by adsorbed heme groups results in production of hydroxylamine (NH(2)OH) with almost 100% selectivity at low potentials. Small amounts of nitrous oxide (N(2)O) were only observed at higher potentials. The rate-determining step in NO reduction most likely consists of an electrochemical equilibrium involving a proton transfer, as can be derived from the Tafel slope value of 62 mV/dec and the pH dependence of -42 mV/pH. The almost 100% selectivity toward NH(2)OH distinguishes this system both from NO reduction on bare metal electrodes, which often yields NH(3), and from biological NO reduction in cytochrome P450nor, which yields N(2)O exclusively.

Calibration of NO sensors for in-vivo voltammetry: laboratory synthesis of NO and the use of UV?visible spectroscopy for determining stock concentrations

The increasing scientific interest in nitric oxide (NO) necessitates the development of novel and simple methods of synthesising NO on a laboratory scale. In this study we have refined and developed a method of NO synthesis, using the neutral Griess reagent, which is inexpensive, simple to perform, and provides a reliable method of generating NO gas for in-vivo sensor calibration. The concentration of the generated NO stock solution was determined using UV-visible spectroscopy to be 0.28+/-0.01 mmol L(-1). The level of NO(2) (-) contaminant, also determined using spectroscopy, was found to be 0.67+/-0.21 mmol L(-1). However, this is not sufficient to cause any considerable increase in oxidation current when the NO stock solution is used for electrochemical sensor calibration over physiologically relevant concentrations; the NO sensitivity of bare Pt-disk electrodes operating at +900 mV (vs. SCE) was 1.08 nA micromol(-1) L, while that for NO(2) (-) was 5.9 x 10(-3) nA micromol(-1) L. The stability of the NO stock solution was also monitored for up to 2 h after synthesis and 30 min was found to be the time limit within which calibrations should be performed.

Electrochemical and spectral studies of the reactions of aquocobalamin with nitric oxide and nitrite ion

Electrochemistry and Raman spectroscopy have shown that aquocob(III)alamin (Cbl(III)) can be reduced by nitric oxide (NO) to form Cbl(II) on an electrode surface. The Cbl(II) formed in this way can bind NO to form nitrosyl-cobalamin, Cbl(II)-NO, which is reduced to form Cbl(I) at about -1.0 V vs a KCl saturated Ag/AgCl reference electrode. In addition, nitrite was found to bind both Cbl(III) and Cbl(II) and a binding constant of 3.5 x 10(2) M(-1) was measured for (NO(2)-Cbl(II))(1-). UV-vis spectrophotometry and mass spectroscopy were used to show that Cbl(I) reduces NO to form Cbl(II)-NO and N(2)O and N(2), and this reaction is involved in the cyclic voltammetry of cobalamin in the presence of excess NO where a catalytic reduction of NO occurs involving the cycling of Cbl(II)-NO/Cbl(I). This redox couple is also involved in the electrochemical catalytic reduction of nitrite. These results can be used to explain a number of physiological effects involving NO interaction in biological systems with added cobalamin or with cobalamin in the methionine synthase enzyme.