Substrate binding and enzyme function investigated by infrared spectroscopy

Folding Kinetics and Volume Variation of the β-Hairpin Peptide Chignolin upon Ultrafast pH-Jumps

In-depth characterization of fundamental folding steps of small model peptides is crucial for a better understanding of the folding mechanisms of more complex biomacromolecules. We have previously reported on the folding/unfolding kinetics of a model α-helix. Here, we study folding transitions in chignolin (GYDPETGTWG), a short β-hairpin peptide previously used as a model to study conformational changes in β-sheet proteins. Although previously suggested, until now, the role of the Tyr2-Trp9 interaction in the folding mechanism of chignolin was not clear. In the present work, pH-dependent conformational changes of chignolin were characterized by circular dichroism (CD), nuclear magnetic resonance (NMR), ultrafast pH-jump coupled with time-resolved photoacoustic calorimetry (TR-PAC), and molecular dynamics (MD) simulations. Taken together, our results present a comprehensive view of chignolin's folding kinetics upon local pH changes and the role of the Tyr2-Trp9 interaction in the folding process. CD data show that chignolin's β-hairpin formation displays a pH-dependent skew bell-shaped curve, with a maximum close to pH 6, and a large decrease in β-sheet content at alkaline pH. The β-hairpin structure is mainly stabilized by aromatic interactions between Tyr2 and Trp9 and CH-π interactions between Tyr2 and Pro4. Unfolding of chignolin at high pH demonstrates that protonation of Tyr2 is essential for the stability of the β-hairpin. Refolding studies were triggered by laser-induced pH-jumps and detected by TR-PAC. The refolding of chignolin from high pH, mainly due to the protonation of Tyr2, is characterized by a volume expansion (10.4 mL mol-1), independent of peptide concentration, in the microsecond time range (lifetime of 1.15 μs). At high pH, the presence of the deprotonated hydroxyl (tyrosinate) hinders the formation of the aromatic interaction between Tyr2 and Trp9 resulting in a more disorganized and dynamic tridimensional structure of the peptide. This was also confirmed by comparing MD simulations of chignolin under conditions mimicking neutral and high pH.

FTIR spectral signature of anticancer drugs. Can drug mode of action be identified?

Infrared spectroscopy has brought invaluable information about proteins and about the mechanism of action of enzymes. These achievements are difficult to transpose to living organisms as all biological molecules absorb in the mid infrared, with usually a high degree of overlap. Deciphering the contribution of each enzyme is therefore almost impossible. On the other hand, small changes in the infrared spectra of cells induced by environmental conditions or drugs may provide an accurate signature of the metabolic shift experienced by the cell as a response to a change in the growth medium. The present paper aims at reviewing the contribution of infrared spectroscopy to the description of small chemical changes that occur in cells when they are exposed to a drug. In particular, this review will focus on cancer cells and anti-cancer drugs. Results accumulated so far tend to demonstrate that infrared spectroscopy could be a very accurate descriptor of the mode of action of anticancer drugs. If confirmed, such a segmentation of potential drugs according to their "mode of action" will be invaluable for the discovery of new therapeutic molecules. This article is part of a Special Issue entitled: Physiological Enzymology and Protein Functions.

Simultaneous Fitting of Absorption Spectra and Their Second Derivatives for an Improved Analysis of Protein Infrared Spectra

Infrared spectroscopy is a powerful tool in protein science due to its sensitivity to changes in secondary structure or conformation. In order to take advantage of the full power of infrared spectroscopy in structural studies of proteins, complex band contours, such as the amide I band, have to be decomposed into their main component bands, a process referred to as curve fitting. In this paper, we report on an improved curve fitting approach in which absorption spectra and second derivative spectra are fitted simultaneously. Our approach, which we name co-fitting, leads to a more reliable modelling of the experimental data because it uses more spectral information than the standard approach of fitting only the absorption spectrum. It also avoids that the fitting routine becomes trapped in local minima. We have tested the proposed approach using infrared absorption spectra of three mixed α/β proteins with different degrees of spectral overlap in the amide I region: ribonuclease A, pyruvate kinase, and aconitase.

Electrochemical and infrared spectroscopic analysis of the interaction of the Cu(A) domain and cytochrome c(552) from Thermus thermophilus

The hydrophobically guided complex formation between the Cu(A) fragment from Thermus thermophilus ba(3) terminal oxidase and its electron transfer substrate, cytochrome c(552), was investigated electrochemically. In the presence of the purified Cu(A) fragment, a clear downshift of the c(552) redox potential from 171 to 111mV±10mV vs SHE' was found. Interestingly, this potential change fully matches complex formation with this electron acceptor site in other oxidases guided by electrostatic or covalent interactions. Redox induced FTIR difference spectra revealed conformational changes associated with complex formation and indicated the involvement of heme propionates. This article is part of a Special Issue entitled: 17th European Bioenergetics Conference (EBEC 2012).

Effects of ions on ligand binding to pyruvate kinase: mapping the binding site with infrared spectroscopy

The effects of mono- and divalent ions (Li(+), K(+), Na(+), Cs(+), Mg(2+), Ca(2+), Mn(2+), Zn(2+)) on the binding of phosphoenolpyruvate (PEP) to rabbit muscle pyruvate kinase (PK) were studied by attenuated total reflection infrared spectroscopy in combination with a dialysis accessory. The experiments assessed the structural change of the protein as well as the binding mode of PEP. They indicated that a signal at 1638 cm(-1) assigned to a β sheet was perturbed differently with Na(+) as compared to the other monovalent ions. Otherwise, we obtained similar conformational changes in the presence of different monovalent cations, and therefore, it seems unlikely that the ion effects on activity are due to an ion effect on the structure of the PEP:PK complex. With different divalent cations, a particularly large conformational change was observed with Mn(2+) and attributed to a more closed conformation of the complex. The absorption of bound PEP was also detected. The antisymmetric stretching vibration of the carboxylate group of bound PEP indicates a more homogeneous binding mode for Mn(2+) compared to the other divalent ions. The symmetric stretching vibration depends on both monovalent and divalent ions, indicating that the dihedral angle O-C(1)-C(2)-O is affected by the ions in the catalytic site. Little change in the bond strengths of PEP is observed, indicating that the PEP:PK complex does not adopt a reactive conformation.

Phosphoenolpyruvate and Mg2+ binding to pyruvate kinase monitored by infrared spectroscopy

Structural changes in rabbit muscle pyruvate kinase (PK) induced by phosphoenolpyruvate (PEP) and Mg(2+) binding were studied by attenuated total reflection Fourier transform infrared spectroscopy in combination with a dialysis accessory. The experiments indicated a largely preserved secondary structure upon PEP and Mg(2+) binding but also revealed small backbone conformational changes of PK involving all types of secondary structure. To assess the effect of the protein environment on the bound PEP, we assigned and evaluated the infrared absorption bands of bound PEP. These were identified using 2,3-(13)C(2)-labeled PEP. We obtained the following assignments: 1589 cm(-1) (antisymmetric carboxylate stretching vibration); 1415 cm(-1) (symmetric carboxylate stretching vibration); 1214 cm(-1) (C-O stretching vibration); 1124 and 1110 cm(-1) (asymmetric PO(3)(2-) stretching vibrations); and 967 cm(-1) (symmetric PO(3)(2-) stretching vibration). The corresponding band positions in solution are 1567, 1407, 1229, 1107, and 974 cm(-1). The differences for bound and free PEP indicate specific interactions between ligand and protein. Quantification of the interactions with the phosphate group indicated that the enzyme environment has little influence on the P-O bond strengths, and that the bridging P-O bond, which is broken in the catalytic reaction, is weakened by <3%. Thus, there is only little distortion toward a dissociative transition state of the phosphate transfer reaction when PEP binds to PK. Therefore, our results are in line with an associative transition state. Carboxylate absorption bands indicated a maximal shortening of the length of the shorter C-O bond by 1.3 pm. PEP bound to PK in the presence of the monovalent ion Na(+) exhibited the same band positions as in the presence of K(+), indicating very similar interaction strengths between ligand and protein in both cases.

Time-resolved infrared spectroscopy of pH-induced aggregation of the Alzheimer Abeta(1-28) peptide

Aggregation of the Alzheimer's disease-related Abeta(1-28) peptide was induced by a rapid, sub-millisecond pH jump and monitored by time-resolved infrared spectroscopy on the millisecond to second time-scale. The release of protons was induced by the photolysis of a caged compound, 1-(2-nitrophenyl)ethyl sulfate (NPE-sulfate). The pH jump generated in our experimental setup is used to model the Abeta peptide structural conversions that may occur in the acidic endosomal/lysosomal cell compartment system. The aggregation of the Abeta(1-28) peptide induced by the pH jump from 8.5 to <6 yields an antiparallel beta-sheet structure. The kinetics of the structural transition is biphasic, showing an initial rapid phase with a transition from random coil to an oligomeric beta-sheet form with a time constant of 3.6 s. This phase is followed by a second slower transition, which yields larger aggregates during 48.0 s.

Characterization of the primary photochemistry of proteorhodopsin with femtosecond spectroscopy

Proteorhodopsin is an ion-translocating member of the microbial rhodopsin family. Light absorption by its retinal chromophore initiates a photocycle, driven by trans/cis isomerization, leading to transmembrane translocation of a proton toward the extracellular side of the cytoplasmic membrane. Here we report a study on the photoisomerization dynamics of the retinal chromophore of proteorhodopsin, using femtosecond time-resolved spectroscopy, by probing in the visible- and in the midinfrared spectral regions. Experiments were performed both at pH 9.5 (a physiologically relevant pH value in which the primary proton acceptor of the protonated Schiff base, Asp(97), is deprotonated) and at pH 6.5 (with Asp(97) protonated). Simultaneous analysis of the data sets recorded in the two spectral regions and at both pH values reveals a multiexponential excited state decay, with time constants of approximately 0.2 ps, approximately 2 ps, and approximately 20 ps. From the difference spectra associated with these dynamics, we conclude that there are two chromophore-isomerization pathways that lead to the K-state: one with an effective rate of approximately (2 ps)(-1) and the other with a rate of approximately (20 ps)(-1). At high pH, both pathways are equally effective, with an estimated quantum yield for K-formation of approximately 0.7. At pH 6.5, the slower pathway is less productive, which results in an isomerization quantum yield of 0.5. We further observe an ultrafast response of residue Asp(227), which forms part of the counterion complex, corresponding to a strengthening of its hydrogen bond with the Schiff base on K-state formation; and a feature that develops on the 0.2 ps and 2 ps timescale and probably reflects a response of an amide II band in reaction to the isomerization process.

Infrared studies reveal unique vibrations associated with the PGK-ATP-3-PG ternary complex

Phosphoglycerate kinase (PGK) catalyzes a reversible phospho-transfer reaction between ATP and 3-phosphoglycerate (3-PG) that is thought to require a hinge-bending motion in the protein that brings two separate substrate-binding domains together. We have used difference infrared spectroscopy to better understand the conformational changes that are unique to the PGK-ATP-3-PG complex. Caged nucleotides (caged-ADP and caged-ATP) were used to initiate nucleotide binding to PGK or PGK-3-PG complexes. The difference spectra include those of PGK-ATP minus PGK, PGK-3-PG-ATP minus PGK-3-PG, PGK-3-PG-ADP minus PGK-3-PG, and PGK-ADP minus PGK. The resulting spectra were compared in attempts to identify bands associated with each PGK complex. In addition, complementary activity assays were performed in the presence of caged-nucleotides. While PGK activity decreased in the presence of caged-ADP, the activity was not influenced by the addition of caged-ATP. The activity assay results suggest that the caged-ADP may interact with PGK substrate binding site(s) and inhibit phospho-transfer. Therefore, additional difference infrared nucleotide exchange experiments were used to isolate the differences between ADP and ATP binding to PGK. Difference FTIR spectra obtained on PGK-nucleotide-3-PG complexes show distinct bands that may result from amino acid side chains as well as structural changes in the hinge region and/or increased interactions such as salt bridges forming between the two domains. The infrared data obtained on the active ternary complexes show evidence of changes in alpha-helix and beta-structures as well as signals consistent with Arg, Asn, His, Lys, Asp, Glu, and additional side chains that are uniquely perturbed in the active ternary complex as compared to other PGK complexes.

Protonation and hydrogen bonding of Ca2+ site residues in the E2P phosphoenzyme intermediate of sarcoplasmic reticulum Ca2+-ATPase studied by a combination of infrared spectroscopy and electrostatic calculations

Protonation of the Ca(2+) ligands of the SR Ca(2+)-ATPase (SERCA1a) was studied by a combination of rapid scan FTIR spectroscopy and electrostatic calculations. With FTIR spectroscopy, we investigated the pH dependence of C=O bands of the Ca(2+)-free phosphoenzyme (E2P) and obtained direct experimental evidence for the protonation of carboxyl groups upon Ca(2+) release. At least three of the infrared signals from protonated carboxyl groups of E2P are pH dependent with pK(a) values near 8.3: a band at 1758 cm(-1) characteristic of nonhydrogen-bonded carbonyl groups, a shoulder at 1720 cm(-1), and part of a band at 1710 cm(-1), both characteristic of hydrogen-bonded carbonyl groups. The bands are thus assigned to H(+) binding residues, some of which are involved in H(+) countertransport. At pH 9, bands at 1743 and 1710 cm(-1) remain which we do not attribute to Ca(2+)/H(+) exchange. We also obtained evidence for a pH-dependent conformational change in beta-sheet or turn structures of the ATPase. With MCCE on the E2P analog E2(TG+MgF(4)(2-)), we assigned infrared bands to specific residues and analyzed whether or not the carbonyl groups of the acidic Ca(2+) ligands are hydrogen bonded. The carbonyl groups of Glu(771), Asp(800), and Glu(908) were found to be hydrogen bonded and will thus contribute to the lower wave number bands. The carbonyl group of some side-chain conformations of Asp(800) is left without a hydrogen-bonding partner; they will therefore contribute to the higher wave number band.

Infrared spectroscopy of proteins

This review discusses the application of infrared spectroscopy to the study of proteins. The focus is on the mid-infrared spectral region and the study of protein reactions by reaction-induced infrared difference spectroscopy.

Accurate theoretical prediction of vibrational frequencies in an inhomogeneous dynamic environment: a case study of a glutamate molecule in water solution and in a protein-bound form

We propose a hierarchical approach to model vibrational frequencies of a ligand in a strongly fluctuating inhomogeneous environment such as a liquid solution or when bound to a macromolecule, e.g., a protein. Vibrational frequencies typically measured experimentally are ensemble averaged quantities which result (in part) from the influence of the strongly fluctuating solvent. Solvent fluctuations can be sampled effectively by a classical molecular simulation, which in our model serves as the first, low level of the hierarchy. At the second high level of the hierarchy a small subset of system coordinates is used to construct a patch of the potential surface (ab initio) relevant to the vibration in question. This subset of coordinates is under the influence of an instantaneous external force exerted by the environment. The force is calculated at the lower level of the hierarchy. The proposed methodology is applied to model vibrational frequencies of a glutamate in water and when bound to the Glutamate receptor protein and its mutant. Our results are in close agreement with the experimental values and frequency shifts measured by the Jayaraman group by the Fourier transform infrared spectroscopy [Q. Cheng et al., Biochem. 41, 1602 (2002)]. Our methodology proved useful in successfully reproducing vibrational frequencies of a ligand in such a soft, flexible, and strongly inhomogeneous protein as the Glutamate receptor.

Structures of the Ca2+-ATPase complexes with ATP, AMPPCP and AMPPNP. An FTIR study

We studied binding of ATP and of the ATP analogs adenosine 5'-(beta,gamma-methylene)triphosphate (AMPCP) and beta,gamma-imidoadenosine 5'-triphosphate (AMPPNP) to the Ca(2+)-ATPase of the sarcoplasmic reticulum membrane (SERCA1a) with time-resolved infrared spectroscopy. In our experiments, ATP reacted with ATPase which had AMPPCP or AMPPNP bound. These experiments monitored exchange of ATP analog by ATP and phosphorylation to the first phosphoenzyme intermediate Ca(2)E1P. These reactions were triggered by the release of ATP from caged ATP. Only small differences in infrared absorption were observed between the ATP complex and the complexes with AMPPCP and AMPPNP indicating that overall the interactions between nucleotide and ATPase are similar and that all complexes adopt a closed conformation. The spectral differences between ATP and AMPPCP complex were more pronounced at high Ca(2+) concentration (10 mM). They are likely due to a different position of the gamma-phosphate which affects the beta-sheet in the P domain.

Towards biochemical reaction monitoring using FT-IR synchrotron radiation

A lab-on-a-chip device made of CaF2 windows and SU-8 polymer was used for fluid lamination to achieve rapid mixing of two streamlines with a cross section of 300 x 5 microm each. Time resolved measurements of the induced chemical reaction was achieved by applying constant feeding low flow rates and by on-chip measurement at defined distances after the mixing point. Synchrotron IR microscopic detection was employed for direct and label-free monitoring of (bio)chemical reactions. Furthermore, using synchrotron IR microscopy the measurement spot could be reduced to the diffraction limit, thus maximizing time resolution in the experimental set-up under study. Based on computational fluid dynamic simulations the principle of the set-up is discussed. Experimental results on the basic hydrolysis of methyl chloroacetate proved the working principle of the experimental set-up. First results on the interaction between the antibiotic vancomycin and a tripeptide (Ac2KAA) involved in the build up of the membrane proteins of gram-positive bacteria are presented.

Interactions of phosphate groups of ATP and Aspartyl phosphate with the sarcoplasmic reticulum Ca2+-ATPase: an FTIR study

Phosphate binding to the sarcoplasmic reticulum Ca2+-ATPase was studied by time-resolved Fourier transform infrared spectroscopy with ATP and isotopically labeled ATP ([beta-18O2, betagamma-18O]ATP and [gamma-18O3]ATP). Isotopic substitution identified several bands that can be assigned to phosphate groups of bound ATP: bands at 1260, 1207, 1145, 1110, and 1085 cm(-1) are affected by labeling of the beta-phosphate, bands likely near 1154, and 1098-1089 cm(-1) are affected by gamma-phosphate labeling. The findings indicate that the strength of interactions of beta- and gamma- phosphate with the protein are similar to those in aqueous solution. Two bands, at 1175 and 1113 cm(-1), were identified for the phosphate group of the ADP-sensitive phosphoenzyme Ca2E1P. They indicate terminal and bridging P-O bond strengths that are intermediate between those of ADP-insensitive phosphoenzyme E2P and the model compound acetyl phosphate in water. The bridging bond of Ca2E1P is weaker than for acetyl phosphate, which will facilitate phosphate transfer to ADP, but is stronger than for E2P, which will make the Ca2E1P phosphate less susceptible to attack by water.

Efficient determination of low-frequency normal modes of large protein structures by cluster-NMA

The structure-function relationship is critical to understanding the biologically relevant functions of protein structures. Various experimental techniques and numerical modeling methods, normal mode analysis (NMA) in particular, have been employed to gain insight into this relationship. Experimental methods are often unable to provide all the desired information and comprehensive modeling techniques are often too computationally expensive. The authors build upon and optimize their cluster normal mode analysis (cNMA) tool, which uses embedded rigid-bodies and harmonic potentials to capture the biologically significant, low-frequency, oscillations of protein structures. cNMA represents atomic details with a scalable number of degrees-of-freedom, which can be chosen independent of structure size. This representation overcomes the otherwise quadratic order memory requirements and cubic order computational complexity associated with traditional all-atom NMA. cNMA is two orders of magnitude faster than traditional all-atom NMA when clustering by residue (very high resolution) and in the more traditional application using a fixed number of clusters, cNMA computationally scales as O(n), which is two orders of complexity faster than all-atom NMA. cNMA is presented and very large example structures with up to 10(6) atoms are analyzed on a notebook PC in the time scale of minutes/hours. The resulting mode shapes help identify biologically significant, conformational pathways.

Ionic interactions at both inter-ring contact sites of GroEL are involved in transmission of the allosteric signal: a time-resolved infrared difference study

The biological activity of the double-ring chaperonin GroEL is regulated by complex allosteric interactions, which include positive intra-ring and negative inter-ring cooperativity. To further characterize inter-ring communication, the nucleotide-induced absorbance changes in the vibrational spectrum of the chaperonin GroEL, of two single-point mutants suppressing one inter-ring ionic contact (E461K and E434K) and of a single-ring version of this protein, were investigated by time-resolved infrared difference spectroscopy. Interaction of the nucleotide with the proteins was triggered by its photochemical release from a biologically inactive caged precursor [P3-1-(2-nitro) phenylethyl nucleotide]. The results indicate that (1) ATP binding to the protein induces a conformational change that affects concomitantly both intra-ring and inter-ring communication, and (2) the experimental absorbance changes are sensitive to the double-ring structure of the protein. The characterization of the single-point, inter-ring mutants demonstrates that ionic interactions at both contact sites are involved in the transmission of the allosteric signal. However, both mutations have different effects on the inter-ring interface. While that of E461K still retains ionic contacts sensitive to ATP binding, E434K shows spectroscopic features similar to those of the single-ring version of the protein, therefore suggesting that electrostatic interactions at these contact sites contribute differently to the stability of the inter-ring interface.

Use of helper enzymes for ADP removal in infrared spectroscopic experiments: application to Ca2+-ATPase

Adenylate kinase (AdK) and apyrase were employed as helper enzymes to remove ADP in infrared spectroscopic experiments that study the sarcoplasmic reticulum Ca(2+)-ATPase. The infrared absorbance changes of their enzymatic reactions were characterized and used to monitor enzyme activity. AdK transforms ADP to ATP and AMP, whereas apyrase consumes ATP and ADP to generate AMP and inorganic phosphate. The benefits of using them as helper enzymes are severalfold: i), both remove ADP generated after ATP hydrolysis by ATPase, which enables repeat of ATP-release experiments several times with the same sample without interference by ADP; ii), AdK helps maintain the presence of ATP for a longer time by regenerating 50% of the initial ATP; iii), apyrase generates free P(i), which can help stabilize the ADP-insensitive phosphoenzyme (E2P); and iv), apyrase can be used to monitor ADP dissociation from transient enzyme intermediates with relatively high affinity to ADP, as shown here for ADP dissociation from the ADP-sensitive phosphoenzyme intermediate (Ca(2)E1P). The respective infrared spectra indicate that ADP dissociation relaxes the closed conformation immediately after phosphorylation partially back toward the open conformation of Ca(2)E1 but does not trigger the transition to E2P. The helper enzyme approach can be extended to study other nucleotide-dependent proteins.

P–O Bond Destabilization Accelerates Phosphoenzyme Hydrolysis of Sarcoplasmic Reticulum Ca2+-ATPase

The phosphate group of the ADP-insensitive phosphoenzyme (E2-P) of sarcoplasmic reticulum Ca2+ -ATPase (SERCA1a) was studied with infrared spectroscopy to understand the high hydrolysis rate of E2-P. By monitoring an autocatalyzed isotope exchange reaction, three stretching vibrations of the transiently bound phosphate group were selectively observed against a background of 50,000 protein vibrations. They were found at 1194, 1137, and 1115 cm(-1). This information was evaluated using the bond valence model and empirical correlations. Compared with the model compound acetyl phosphate, structure and charge distribution of the E2-P aspartyl phosphate resemble somewhat the transition state in a dissociative phosphate transfer reaction; the aspartyl phosphate of E2-P has 0.02 A shorter terminal P-O bonds and a 0.09 A longer bridging P-O bond that is approximately 20% weaker, the angle between the terminal P-O bonds is wider, and -0.2 formal charges are shifted from the phosphate group to the aspartyl moiety. The weaker bridging P-O bond of E2-P accounts for a 10(11)-10(15)-fold hydrolysis rate enhancement, implying that P-O bond destabilization facilitates phosphoenzyme hydrolysis. P-O bond destabilization is caused by a shift of noncovalent interactions from the phosphate oxygens to the aspartyl oxygens. We suggest that the relative positioning of Mg2+ and Lys684 between phosphate and aspartyl oxygens controls the hydrolysis rate of the ATPase phosphoenzymes and related phosphoproteins.

Structural Changes in the Photoactive Site of Proteorhodopsin during the Primary Photoreaction

Proteorhodopsin (PR), found in marine gamma-proteobacteria, is a newly discovered light-driven proton pump similar to bacteriorhodopsin (BR). Because of the widespread distribution of proteobacteria in the worldwide oceanic waters, this pigment may contribute significantly to the global solar energy input in the biosphere. We examined structural changes that occur during the primary photoreaction (PR --> K) of wild-type pigment and two mutants using low-temperature FTIR difference spectroscopy. Several vibrations detected in the 3500-3700 cm(-1) region are assigned on the basis of H(2)O --> H(2)(18)O exchange to the perturbation of one or more internal water molecules. Substitution of the negatively charged Schiff base counterion, Asp97, with the neutral asparagine caused a downshift of the ethylenic (C=C) and Schiff base (C=N) stretching modes, in agreement with the 27 nm red shift of the visible lambda(max). However, this replacement did not alter the normal all-trans to 13-cis isomerization of the chromophore or the environment of the detected water molecule(s). In contrast, substitution of Asn230, which is in a position to interact with the Schiff base, with Ala induces a 5 nm red shift of the visible lambda(max) and alters the PR chromophore structure, its isomerization to K, and the environment of the detected internal water molecules. The combination of FTIR and site-directed mutagenesis establishes that both Asp97 and Asn230 are perturbed during the primary phototransition. The environment of Asn230 is further altered during the thermal decay of K. These results suggest that significant differences exist in the conformational changes which occur in the photoactive sites of proteorhodopsin and bacteriorhodopsin during the primary photoreaction.

Mass Spectrometric Approaches Using Electrospray Ionization Charge States and Hydrogen-Deuterium Exchange for Determining Protein Structures and Their Conformational Changes

Electrospray ionization (ESI) mass spectrometry (MS) is a powerful analytical tool for elucidating structural details of proteins in solution especially when coupled with amide hydrogen/deuterium (H/D) exchange analysis. ESI charge-state distributions and the envelopes of charges they form from proteins can provide an abundance of information on solution conformations that is not readily available through other biophysical techniques such as near ultraviolet circular dichroism (CD) and tryptophan fluorescence. The most compelling reason for the use of ESI-MS over nuclear magnetic resonance (NMR) for measuring H/D after exchange is that larger proteins and lesser amounts of samples can be studied. In addition, MS can provide structural details on transient or folding intermediates that may not be accessible by CD, fluorescence, and NMR because these techniques measure the average properties of large populations of proteins in solution. Correlations between measured H/D and calculated parameters that are often available from crystallographic data can be used to extend the range of structural details obtained on proteins. Molecular dynamics and energy minimization by simulation techniques such as assisted model building with energy refinement (AMBER) force field can be very useful in providing structural models of proteins that rationalize the experimental H/D exchange results. Charge-state envelopes and H/D exchange information from ESI-MS data used complementarily with NMR and CD data provides the most powerful approach available to understanding the structures and dynamics of proteins in solution.

Structure and function of the calcium pump

Active transport of cations is achieved by a large family of ATP-dependent ion pumps, known as P-type ATPases. Various members of this family have been targets of structural and functional investigations for over four decades. Recently, atomic structures have been determined for Ca2+-ATPase by X-ray crystallography, which not only reveal the architecture of these molecules but also offer the opportunity to understand the structural mechanisms by which the energy of ATP is coupled to calcium transport across the membrane. This energy coupling is accomplished by large-scale conformational changes. The transmembrane domain undergoes plastic deformations under the influence of calcium binding at the transport site. Cytoplasmic domains undergo dramatic rigid-body movements that deliver substrates to the catalytic site and that establish new domain interfaces. By comparing various structures and correlating functional data, we can now begin to associate the chemical changes constituting the reaction cycle with structural changes in these domains.

A putative consensus sequence for the nucleotide-binding site of annexin A6

Reaction-induced infrared difference spectroscopy (RIDS) has been used to investigate the nature of interactions of human annexin A6 (ANXA6) with nucleotides. RIDS results for ANXA6, obtained after the photorelease of GTP-gamma-S, ATP, or P(i) from the respective caged compounds, were identical, suggesting that the interactions between the nucleotide and ANXA6 were dominated by the phosphate groups. Phosphate-induced structural changes in ANXA6 were small and affected only seven or eight amino acid residues. The GTP fluorescent analogue, 2'(3')-O-(2,4,6-trinitrophenyl)guanosine 5'-triphosphate (TNP-GTP), quenched tryptophan fluorescence of ANXA6 when bound to the protein. A binding stoichiometry of 1 mol of nucleotide/mol ANXA6 was established with a K(D) value of 2.8 microM for TNP-GTP. The bands observed on RIDS of ANXA6 halves (e.g., N-terminal half, ANXA6a, and C-terminal half, ANXA6b) were similar to those of the whole molecule. However, their amplitudes were smaller by a factor of 2 compared to those of whole ANXA6. TNP-GTP bound to both fragments of ANXA6 with a stoichiometry of 0.5 mol/mol. However, the binding affinities of ANXA6a and ANXA6b differed from that of ANXA6. Simulated molecular modeling revealed a nucleotide-binding site which was distributed in two distinct domains. Residues K296, Y297, K598, and K644 of ANXA6 were less than 3 A from the bound phosphate groups of either GTP or ATP. The presence of two identical sequences in ANXA6 with the F-X-X-K-Y-D/E-K-S-L motif, located in the middle of ANXA6, at residues 293-301 (within ANXA6a) and at 641-649 (within ANXA6b), suggested that the F-X-X-K-Y-D/E-K-S-L motif was the putative sequence in ANXA6 for nucleotide binding.

Mapping interactions between the Ca2+-ATPase and its substrate ATP with infrared spectroscopy

Infrared spectroscopy has been used to map substrate-protein interactions: the conformational changes of the sarcoplasmic reticulum Ca(2+)-ATPase upon nucleotide binding and ATPase phosphorylation were monitored using the substrate ATP and ATP analogues (2'-deoxy-ATP, 3'-deoxy-ATP, and inosine 5'-triphosphate), which were modified at specific functional groups of the substrate. Modifications to the 2'-OH, the 3'-OH, and the amino group of adenine reduce the extent of binding-induced conformational change of the ATPase, with particularly strong effects observed for the latter two. This demonstrates the structural sensitivity of the nucleotide-ATPase complex to individual interactions between nucleotide and ATPase. All groups studied are important for binding and interactions of a given ligand group with the ATPase depend on interactions of other ligand groups. Phosphorylation of the ATPase was observed for ITP and 2'-deoxy-ATP, but not for 3'-deoxy-ATP. There is no direct link between the extent of conformational change upon nucleotide binding and the rate of phosphorylation showing that the full extent of the ATP-induced conformational change is not mandatory for phosphorylation. As observed for the nucleotide-ATPase complex, the conformation of the first phosphorylated ATPase intermediate E1PCa(2) also depends on the nucleotide, indicating that ATPase states have a less uniform conformation than previously anticipated.

Characterization of a new caged proton capable of inducing large pH jumps

A new caged proton, 1-(2-nitrophenyl)ethyl sulfate (caged sulfate), is characterized by infrared spectroscopy and compared with a known caged, proton 2-hydroxyphenyl 1-(2-nitrophenyl)ethyl phosphate (caged HPP). In contrast to caged HPP, caged sulfate can induce large pH jumps and protonate groups that have pK values as low as 2.2. The photolysis mechanism of caged sulfate is analogous to that of P(3)-[1-(2-nitrophenyl)ethyl] ATP (caged ATP), and the photolysis efficiency is similar. The utility of this new caged compound for biological studies was demonstrated by its ability to drive the acid-induced conformational change of metmyoglobin. This transition from the native conformation to a partially unfolded form takes place near pH 4 and was monitored by near-UV absorption spectroscopy.

Direct measurement of enzyme activity with infrared spectroscopy

A direct approach to enzyme activity measurements is presented. Vibrational spectroscopy can monitor the progress of enzymatic reactions because the vibrational spectrum of substrates and products usually differs. This is demonstrated by the example of ATP hydrolysis by Ca(2+)-ATPase: The substrate concentration can be followed using the infrared absorption of the alpha- and beta-PO(2)(-) phosphate groups of ATP, and the product concentration can be followed using the PO(3)(2-) absorption of P(i) and of the beta-phosphate of ADP. The results of the infrared spectroscopic measurement of ATPase activity and of an independent activity assay agree very well. The main advantage of the infrared method is that it observes the reaction of interest directly--that is, no activity assay that converts the progress of the reaction into an observable quantity is required.

Selective monitoring of 3 out of 50,000 protein vibrations

An important group in a large protein, which is the phosphate group that transiently binds to the Ca2+ transporting ATPase (Ca2+-ATPase) of the sarcoplasmic reticulum membrane, is selectively observed with IR spectroscopy. The three phosphate stretching vibrations stand out from the 50,000 protein vibrations in an isotope exchange experiment where oxygen exchange at the phosphate group is catalyzed by the Ca2+-ATPase.

The infrared absorption of amino acid side chains

Amino acid side chains play fundamental roles in stabilising protein structures and in catalysing enzymatic reactions. These fields are increasingly investigated by infrared spectroscopy at the molecular level. To help the interpretation of the spectra, a review of the infrared absorption of amino acid side chains in H(2)O and 2H(2)O is given. The spectral region of 2600-900cm(-1) is covered.

Reaction-induced infrared difference spectroscopy for the study of protein reaction mechanisms

This paper reviews state-of-the-art reaction-induced infrared difference spectroscopy of proteins. This technique enables detailed characterization of enzyme function on the level of single bonds of proteins, cofactors, or substrates. The following methods to initiate a reaction in the infrared sample are discussed: (i) light-induced difference spectroscopy, (ii) attenuated total reflection with buffer exchange, (iii) the infrared variant of stopped and continuous flow, (iv) temperature and pressure jump, (v) photolytical release of effector substances from caged compounds, (vi) equilibrium electrochemistry, and (vii) photoreduction. Illustrating applications are given including hot topics from the fields of bioenergetics, protein folding, and molecule--protein interaction.