Molecular cloning of the gene for bilirubin oxidase from Myrothecium verrucaria and its expression in yeast

Bilirubin oxidase expression and activity enhancement from Myrothecium verrucaria in Aspergillus species

We constructed a new Aspergillus expression vector (pSENSU2512nid) under the control of the enolase promoter with 12 tandem repeats of cis-acting elements (region III) and the heat shock protein 12 (Hsp12) 5' untranslated region (UTR). Bilirubin oxidase (EC: 1.3.3.5) from Myrothecium verrucaria, which catalyzes the oxidation of bilirubin to biliverdin, was overexpressed in Aspergillus oryzae and A. niger. The productivity was estimated to be approximately 1.2 g/L in the culture broth, which was approximately 6-fold higher than that of recombinant bilirubin oxidase (BOD) expressed in Pichia pastoris (Komagataella phaffii). BOD was purified using hydrophobic interaction chromatography, followed by ion exchange chromatography. The specific activity of the purified BOD against 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) substrate was 57.6 U/mg and 66.4 U/mg for A. oryzae and A. niger, respectively. l-Ascorbic acid (4 mM) addition and storage under deoxygenated conditions for 3-7 d increased the specific activity of these Aspergillus-expressed BODs approximately 2.3-fold (154.1 U/mg). The BOD specific activity was enhanced by incubation at higher temperature (30-50 °C). Further characterization of the enzyme catalytic efficiency revealed that the Km value remained unchanged, whereas the kcat value improved 3-fold. In conclusion, this high-level of BOD expression meets the requirements for industrial-level production. Additionally, we identified an effective method to enhance the low specific activity during expression, making it advantageous for industrial applications.

Insight into multicopper oxidase laccase from Myrothecium verrucaria ITCC-8447: a case study using in silico and experimental analysis

The oxidation activity of multicopper-oxidases overlaps with different substrates of laccases and bilirubin oxidases, thus in the present study an integrated approach of bioinformatics using homology modeling, docking, and experimental validation was used to confirm the type of multicopper-oxidase in Myrothecium verrucaria ITCC-8447. The result of peptide sequence of M. verrucaria ITCC-8447 enabled to predict the 3 D-structure of multicopper-oxidase. It was overlapped with the structure of laccase and root mean square deviation (RMSD) was 1.53 Å for 533 and, 171 residues. The low binding energy with azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) (-5.64) as compared to bilirubin (-4.39) suggested that M. verrucaria ITCC-8447 have laccase-like activity. The experimental analysis confirmed high activity with laccase specific substrates, phenol (18.3 U/L), ampyrone (172.4 U/L) and, ampyrone phenol coupling (50 U/L) as compared to bilirubin oxidase substrate bilirubin (16.6 U/L). In addition, lowest binding energy with ABTS (-5.64), syringaldazine SYZ (-4.83), guaiacol GCL (-4.42), and 2,6-dimethoxyphenol DMP (-4.41) confirmed the presence of laccase. Further, complete remediation of two hazardous model pollutants i.e., phenol and resorcinol (1.5 mM) after 12 h of incubation and low binding energy of -4.32 and, -4.85 respectively confirmed its removal by laccase. The results confirmed the presence of laccase in M. verrucaria ITCC-8447 and its effective bioremediation potential.

Development of an Analysis Toolkit, AnalysisFMO, to Visualize Interaction Energies Generated by Fragment Molecular Orbital Calculations

In modern praxis, a knowledge-driven design of pharmaceutical compounds relies heavily on protein structure data. Nonetheless, quantification of the interaction between protein and ligand is of great importance in the theoretical evaluation of the ability of a pharmaceutical compound to comply with certain expectations. The FMO (fragment molecular orbital) method is handy in this regard. However, the physical complexity and the number of the interactions within a protein-ligand complex renders analysis of the results somewhat complicated. This situation prompted us to develop the 3D-visualization of interaction energies in protein (3D-VIEP) method; the toolkit AnalysisFMO, which should enable a more efficient and convenient workflow with FMO data generated by quantum-chemical packages such as GAMESS, PAICS, and ABINIT-MP. AnalysisFMO consists of two separate units, RbAnalysisFMO, and the PyMOL plugins. The former can extract interfragment interaction energies (IFIEs) or pair interaction energies (PIEs) from the FMO output files generated by the aforementioned quantum-chemical packages. The PyMOL plugins enable visualization of IFIEs or PIEs in the protein structure in PyMOL. We demonstrate the use of this tool on a lectin protein from Burkholderia cenocepacia in which FMO analysis revealed the existence of a new interaction between Gly84 and fucose. Moreover, we found that second-shell interactions are crucial in forming the sugar binding site. In the case of bilirubin oxidase from Myrothecium verrucaria (MvBO), we predict that interactions between Asp105 and three His residues (His401, His403, and His136) are essential for optimally positioning the His residues to coordinate Cu atoms to form one Type 2 and two Type 3 Cu ions.

Redox Potential-Dependent Formation of an Unusual His-Trp Bond in Bilirubin Oxidase

Bilirubin oxidase (BOD) belongs to the family of blue multicopper oxidases, and catalyzes the concomitant oxidation of bilirubin to biliverdin and the reduction of molecular oxygen to water via a four-electron reduction system. The active sites of BOD comprise four copper atoms; type I copper (T1Cu) forms a mononuclear site, and a cluster of three copper atoms forms a trinuclear center. In the present study, we determined the high-resolution crystal structures of BOD from the fungus Myrothecium verrucaria. We investigated wild-type (WT) BOD and a BOD mutant called Met467Gln, which is inactive against bilirubin. The structures revealed that a novel post-translational crosslink between Trp396 and His398 is formed in the vicinity of the T1Cu site in WT BOD, whereas it is absent in the Met467Gln mutant. Our structural and computational studies suggest that the His-Trp crosslink adjusts the redox potential of T1Cu to that of bilirubin to efficiently abstract electrons from the substrate.

Improvement of bilirubin oxidase productivity of Myrothecium verrucaria and studies on the enzyme overproduced by the mutant strain in the solid-state fermentation

Bilirubin oxidase has applications in the health and environmental sectors. Hence, several attempts have been made to increase enzyme yields. However, improvements were not very high. We report here the development of a mutant strain of Myrothecium verrucaria by using UV-rays, which produced 28.8 times more enzyme compared with the parent and was higher than the yields reported in earlier submerged cultures. The mutant strain produced 35.6 times more enzyme than the parent in solid-state fermentation, which is better than that previously reported for a solid-state fermentation process. The specific activity of the enzyme produced by the mutant was higher than that of the parental enzyme. Bilirubin oxidase from both strains showed an optimum activity at pH 7 and 40°C. However, the time required to inactivate half of the initial enzyme activity at 60°C was much higher in the case of the enzyme obtained from the mutant compared with the parental enzyme. The improved thermostability of the enzyme from the mutant strain could be due to the point mutations induced during the UV irradiation, since there was no change in the mass of the enzyme compared with the parental enzyme. The bilirubin oxidase of the mutant strain degraded the bilirubin faster than the enzyme obtained from the parent under similar conditions. Faster activity of the enzyme obtained from the mutant strain could be due to its lower K_m (79.4 μM) compared with that of the parental enzyme (184 μM). Hence, the mutant enzyme showed a better functionality and thermostability, which will be beneficial for industrial applications.

Halide binding and inhibition of laccase copper clusters: the role of reorganization energy

Laccase-like proteins are multicopper oxidases involved in several biological and industrial processes. Their application is commonly limited due to inhibition by fluoride and chloride, and as-isolated proteins are often substantially activated by heat, suggesting that multiple redox states can complicate characterization. Understanding these processes at the molecular level is thus desirable but theoretically unexplored. This paper reports systematic calculations of geometries, reorganization energies, and ionization energies for all partly oxidized states of the trinuclear copper clusters in realistic models with ∼200 atoms. Corrections for scalar-relativistic effects, dispersion, and thermal effects were estimated. Fluoride, chloride, hydroxide, or water was bound to the T2 copper site of the oxidized resting state, and the peroxo intermediate was also computed for reference. Antiferromagnetic coupling, assigned oxidation states, and general structures were consistent with known spectroscopic data. The computations show that (i) ligands bound to the T2 site substantially increase the reorganization energy of the second reduction of the resting state and reduce the redox potentials, providing a possible mechanism for inhibition; (ii) the reorganization energy is particularly large for F(-) but also high for Cl(-), consistent with the experimental tendency of inhibition; (iii) reduction leads to release of Cl(-) from the T2 site, suggesting a mechanism for heat/reduction activation of laccases by dissociation of inhibiting halides or hydroxide from T2.

Engineering the expression and characterization of two novel laccase isoenzymes from Coprinus comatus in Pichia pastoris by fusing an additional ten amino acids tag at N-terminus

The detail understanding of physiological/biochemical characteristics of individual laccase isoenzymes in fungi is necessary for fundamental and application purposes, but our knowledge is still limited for most of fungi due to difficult to express laccases heterologously. In this study, two novel laccase genes, named lac3 and lac4, encoding proteins of 547 and 532-amino acids preceded by 28 and 16-residue signal peptides, respectively, were cloned from the edible basidiomycete Coprinus comatus. They showed 70% identity but much lower homology with other fungal laccases at protein level (less than 58%). Two novel laccase isoenzymes were successfully expressed in Pichia pastoris by fusing an additional 10 amino acids (Thr-Pro-Phe-Pro-Pro-Phe-Asn-Thr-Asn-Ser) tag at N-terminus, and the volumetric activities could be dramatically enhanced from undetectable level to 689 and 1465 IU/l for Lac3 and Lac4, respectively. Both laccases possessed the lowest Km and highest kcat/Km value towards syringaldazine, followed by ABTS, guaiacol and 2,6-dimethylphenol similar as the low redox potential laccases from other microorganisms. Lac3 and Lac4 showed resistant to SDS, and retained 31.86% and 43.08% activity in the presence of 100 mM SDS, respectively. Lac3 exhibited higher decolorization efficiency than Lac4 for eleven out of thirteen different dyes, which may attribute to the relatively higher catalytic efficiency of Lac3 than Lac4 (in terms of kcat/Km) towards syringaldazine and ABTS. The mild synergistic decolorization by two laccases was observed for triphenylmethane dyes but not for anthraquinone and azo dyes.

Purification and characterization of a new laccase from the filamentous fungus Podospora anserina

A new laccase from the filamentous fungus Podospora anserina has been isolated and identified. The 73 kDa protein containing 4 coppers, truncated from its first 31 amino acids, was successfully overexpressed in Pichia pastoris and purified in one step with a yield of 48% and a specific activity of 644Umg(-1). The kinetic parameters, k(cat) and K(M), determined at 37 °C and optimal pH are 1372 s(-1) and 307 μM for ABTS and, 1.29 s(-1) and 10.9 μM, for syringaldazine (SGZ). Unlike other laccases, the new protein displays a better thermostability, with a half life>400 min at 37 °C, is less sensitive to chloride and more stable at pH 7. Even though, the new 566 amino-acid enzyme displays a large homology with Bilirubin oxidase (BOD) from Myrothecium verrucaria (58%) and exhibits the four histidine rich domains consensus sequences of BODs, the new enzyme is not able to oxidize neither conjugated nor unconjugated bilirubin.

Electrochemical characterization of a unique, "neutral" laccase from Flammulina velutipes

The flac1 gene consisted of 1488 bases encodes a novel laccase (Flac1) from Flammulina velutipes. The deduced amino acid sequence of Flac1 with 496 amino acids shows 58-64% homologies with other fungal laccases. The recombinant Flac1 (rFlac1) was heterologously expressed in Pichia pastoris, with sugars of approximately 4 kDa attached on the protein molecule, which has the calculated molecular mass of 53,532 Da. rFlac1 was shown to be a multi-copper oxidase from spectroscopies. The optimum pHs of rFlac1 for oxidations of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), p-phenylenediamine, and o-aminophenol, were 5.0, 5.0, and 6.0-6.5, respectively, showing higher pH values than those from many other fungal laccases. The slightly acidic or neutral optimum pH that is not strongly dependent on substrates is a unique property of rFlac1. Effective O(2) reduction was realized by the direct electron transfer of rFlac1 at a highly oriented pyrolytic graphite electrode modified with fine carbon particles (Ketjen Black) in O(2)-saturated solution. The pHs showing the maximum ΔE°' [=E°'(enzyme) - E°'(substrate)] coincided well with the optimum pHs shown by rFlac1 under steady-state conditions. The present electrochemical results of rFlac1 indicate that ΔE°' is one of the primary factors to determine the activity of multi-copper oxidases.

Characterisation of a novel white laccase from the deuteromycete fungus Myrothecium verrucaria NF-05 and its decolourisation of dyes

A novel ‘white’ laccase was purified from the deuteromycete fungus, Myrothecium verrucaria NF-05, which was a high laccase-producing strain (40.2 U·ml⁻¹ on the thirteenth day during fermentation). SDS-PAGE and native-PAGE revealed a single band with laccase activity corresponding to a molecular weight of approximately 66 kDa. The enzyme had three copper and one iron atoms per protein molecule determined by ICP-AES. Furthermore, both UV/visible and EPR spectroscopy remained silence, indicating the enzyme a novel laccase with new metal compositions of active centre and spectral properties. The N-terminal amino acid sequence of the purified protein was APQISPQYPM. Together with MALDI-TOF analysis, the protein revealed a high homology of the protein with that from reported M. verrucaria. The highest activity was detected at pH 4.0 and at 30°C. The enzyme activity was significantly enhanced by Na⁺, Mn²⁺, Cu²⁺ and Zn²⁺ while inhibited by DTT, NaN₃ and halogen anions. The kinetic constant (Km) showed the enzyme was more affinitive to ABTS than other tested aromatic substrates. Twelve structurally different dyes could be effectively decolourised by the laccase within 10 min. The high production of the strain and novel properties of the laccase suggested its potential for biotechnological applications.

Bilirubin oxidase from Magnaporthe oryzae: an attractive new enzyme for biotechnological applications

A novel bilirubin oxidase (BOD), from the rice blast fungus Magnaporthe oryzae, has been identified and isolated. The 64-kDa protein containing four coppers was successfully overexpressed in Pichia pastoris and purified to homogeneity in one step. Protein yield is more than 100 mg for 2 L culture, twice that of Myrothecium verrucaria. The k(cat)/K(m) ratio for conjugated bilirubin (1,513 mM⁻¹ s⁻¹) is higher than that obtained for the BOD from M. verrucaria expressed in native fungus (980 mM⁻¹ s⁻¹), with the lowest K(m) measured for any BOD highly desirable for detection of bilirubin in medical samples. In addition, this protein exhibits a half-life for deactivation >300 min at 37 °C, high stability at pH 7, and high tolerance towards urea, making it an ideal candidate for the elaboration of biofuel cells, powering implantable medical devices. Finally, this new BOD is efficient in decolorizing textile dyes such as Remazol brilliant Blue R, making it useful for environmentally friendly industrial applications.

Mechanistic studies of the 'blue' Cu enzyme, bilirubin oxidase, as a highly efficient electrocatalyst for the oxygen reduction reaction

The 'blue copper' enzyme bilirubin oxidase from Myrothecium verrucaria shows significantly enhanced adsorption on a pyrolytic graphite 'edge' (PGE) electrode that has been covalently modified with naphthyl-2-carboxylate functionalities by diazonium coupling. Modified electrodes coated with bilirubin oxidase show electrocatalytic voltammograms for the direct, four-electron reduction of O(2) by bilirubin oxidase with up to four times the current density of an unmodified PGE electrode. Electrocatalytic voltammograms measured with a rapidly rotating electrode (to remove effects of O(2) diffusion limitation) have a complex shape (an almost linear dependence of current on potential below pH 6) that is similar regardless of how PGE is chemically modified. Importantly, the same waveform is observed if bilirubin oxidase is adsorbed on Au(111) or Pt(111) single-crystal electrodes (at which activity is short-lived). The electrocatalytic behavior of bilirubin oxidase, including its enhanced response on chemically-modified PGE, therefore reflects inherent properties that do not depend on the electrode material. The variation of voltammetric waveshapes and potential-dependent (O(2)) Michaelis constants with pH and analysis in terms of the dispersion model are consistent with a change in rate-determining step over the pH range 5-8: at pH 5, the high activity is limited by the rate of interfacial redox cycling of the Type 1 copper whereas at pH 8 activity is much lower and a sigmoidal shape is approached, showing that interfacial electron transfer is no longer a limiting factor. The electrocatalytic activity of bilirubin oxidase on Pt(111) appears as a prominent pre-wave to electrocatalysis by Pt surface atoms, thus substantiating in a single, direct experiment that the minimum overpotential required for O(2) reduction by the enzyme is substantially smaller than required at Pt. At pH 8, the onset of O(2) reduction lies within 0.14 V of the four-electron O(2)/2H(2)O potential.

ATR-FTIR study of the protonation states of the Glu residue in the multicopper oxidases, CueO and bilirubin oxidase

Redox-induced protonation state changes of the Glu residue in the multicopper oxidases, CueO and bilirubin oxidase (BO), were studied by attenuated total reflectance-Fourier transform infrared spectroscopy. By monitoring IR bands of the carboxylic acid C=O stretch in the wild-type and Glu-to-Gln mutant enzymes the Glu506 of CueO (Glu463 of BO) was found to be unprotonated in the oxidised and protonated in the reduced forms. The results provided direct evidence for proton uptake by the Glu, suggesting it plays a key role in the proton donation to the activated oxygen species in the catalytic cycle.

LccA, an archaeal laccase secreted as a highly stable glycoprotein into the extracellular medium by Haloferax volcanii

Laccases couple the oxidation of phenolic compounds to the reduction of molecular oxygen and thus span a wide variety of applications. While laccases of eukaryotes and bacteria are well characterized, these enzymes have not been described in archaea. Here, we report the purification and characterization of a laccase (LccA) from the halophilic archaeon Haloferax volcanii. LccA was secreted at high levels into the culture supernatant of a recombinant H. volcanii strain, with peak activity (170 +/- 10 mU.ml(-)(1)) at stationary phase (72 to 80 h). LccA was purified 13-fold to an overall yield of 72% and a specific activity of 29.4 U.mg(-)(1) with an absorbance spectrum typical of blue multicopper oxidases. The mature LccA was processed to expose an N-terminal Ala after the removal of 31 amino acid residues and was glycosylated to 6.9% carbohydrate content. Purified LccA oxidized a variety of organic substrates, including bilirubin, syringaldazine (SGZ), 2,2,-azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), and dimethoxyphenol (DMP), with DMP oxidation requiring the addition of CuSO(4). Optimal oxidation of ABTS and SGZ was at 45 degrees C and pH 6 and pH 8.4, respectively. The apparent K(m) values for SGZ, bilirubin, and ABTS were 35, 236, and 670 muM, with corresponding k(cat) values of 22, 29, and 10 s(-)(1), respectively. The purified LccA was tolerant of high salt, mixed organosolvents, and high temperatures, with a half-life of inactivation at 50 degrees C of 31.5 h.

Microbial manganese oxide formation and interaction with toxic metal ions

Diverse bacteria and fungi oxidize Mn(II) enzymatically and produce insoluble Mn(III, IV) oxides, and these organisms are considered to be the primal agents for the occurrence of natural Mn oxide phases in most environments. Biogenic Mn oxides have a high sorption capacity for metal cations and an ability to oxidize numerous inorganic and organic compounds, owing to their structural and redox features. Thus, the microbial process is of significance in both biogeochemical and biotechnological contexts. In this article we summarize the enzymatic Mn(II) oxidation and interactions of biogenic Mn oxides with toxic metal and metalloid ions. Although Mn oxide formation by fungi has not been fully characterized yet, recent researches with ascomycetes emphasize the similarity between the bacterial and fungal Mn(II) oxidation with respect to the involved catalyst (i.e., multicopper oxidase-type enzymes) and the reaction product [i.e., layer-type Mn(IV) oxides]. Laboratory cultures of bacterial and fungal Mn oxidizers are expected to provide fundamental knowledge in their potential use for remediation of environments and effluents contaminated with toxic metal(loid) ions.

Manganese(IV) oxide production by Acremonium sp. strain KR21-2 and extracellular Mn(II) oxidase activity

Ascomycetes that can deposit Mn(III, IV) oxides are widespread in aquatic and soil environments, yet the mechanism(s) involved in Mn oxide deposition remains unclear. A Mn(II)-oxidizing ascomycete, Acremonium sp. strain KR21-2, produced a Mn oxide phase with filamentous nanostructures. X-ray absorption near-edge structure (XANES) spectroscopy showed that the Mn phase was primarily Mn(IV). We purified to homogeneity a laccase-like enzyme with Mn(II) oxidase activity from cultures of strain KR21-2. The purified enzyme oxidized Mn(II) to yield suspended Mn particles; XANES spectra indicated that Mn(II) had been converted to Mn(IV). The pH optimum for Mn(II) oxidation was 7.0, and the apparent half-saturation constant was 0.20 mM. The enzyme oxidized ABTS [2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid)] (pH optimum, 5.5; Km, 1.2 mM) and contained two copper atoms per molecule. Moreover, the N-terminal amino acid sequence (residues 3 to 25) was 61% identical with the corresponding sequence of an Acremonium polyphenol oxidase and 57% identical with that of a Myrothecium bilirubin oxidase. These results provide the first evidence that a fungal multicopper oxidase can convert Mn(II) to Mn(IV) oxide. The present study reinforces the notion of the contribution of multicopper oxidase to microbially mediated precipitation of Mn oxides and suggests that Acremonium sp. strain KR21-2 is a good model for understanding the oxidation of Mn in diverse ascomycetes.

Redox potentials of the blue copper sites of bilirubin oxidases

The redox potentials of the multicopper redox enzyme bilirubin oxidase (BOD) from two organisms were determined by mediated and direct spectroelectrochemistry. The potential of the T1 site of BOD from the fungus Myrothecium verrucaria was close to 670 mV, whereas that from Trachyderma tsunodae was >650 mV vs. NHE. For the first time, direct electron transfer was observed between gold electrodes and BODs. The redox potentials of the T2 sites of both BODs were near 390 mV vs. NHE, consistent with previous finding for laccase and suggesting that the redox potentials of the T2 copper sites of most blue multicopper oxidases are similar, about 400 mV.

Phylogenetic comparison and classification of laccase and related multicopper oxidase protein sequences

A phylogenetic analysis of more than 350 multicopper oxidases (MCOs) from fungi, insects, plants, and bacteria provided the basis for a refined classification of this enzyme family into laccases sensu stricto (basidiomycetous and ascomycetous), insect laccases, fungal pigment MCOs, fungal ferroxidases, ascorbate oxidases, plant laccase-like MCOs, and bilirubin oxidases. Within the largest group of enzymes, formed by the 125 basidiomycetous laccases, the gene phylogeny does not strictly follow the species phylogeny. The enzymes seem to group at least partially according to the lifestyle of the corresponding species. Analyses of the completely sequenced fungal genomes showed that the composition of MCOs in the different species can be very variable. Some species seem to encode only ferroxidases, whereas others have proteins which are distributed over up to four different functional clusters in the phylogenetic tree.

Bilirubin oxidase activity of Bacillus subtilis CotA

The spore coat protein CotA from Bacillus subtilis was previously identified as a laccase. We have now found that CotA also shows strong bilirubin oxidase activity and markedly higher affinity for bilirubin than conventional bilirubin oxidase. This is the first characterization of bilirubin oxidase activity in a bacterial protein.

High-level expression of Myrothecium verrucaria bilirubin oxidase in Pichia pastoris, and its facile purification and characterization

Bilirubin oxidase (BO) from Myrothecium verrucaria (authentic BO) catalyzing the oxidation of bilirubin to biliverdine was overexpressed in the methylotrophic yeast, Pichia pastoris. The cDNA encoding BO was cloned into the P. pastoris expression vector pPIC9K under the control of the alcohol oxidase 1 promoter and its protein product was secreted using the Saccharomyces cerevisiae alpha-mating factor signal sequence. The productivity of recombinant BO (rBO) in P. pastoris was approximately 5000 U/L of culture broth, being about 2.5- and 250-fold higher than rBO expressed in Aspergillus oryzae and S. cerevisiae, respectively. The calculated molecular mass of rBO consisting of 538 amino acids was 60,493 kDa, however, that of SDS-PAGE was 66 kDa because of non-native type N-linked sugar chains. The spectroscopic properties of rBO were typical of multicopper oxidase containing four Cu ions per protein molecule. The specific activity to oxidize bilirubin was 57 U/mg, having a value about twice that of authentic BO and rBO expressed in A. oryzae. Moreover, the thermostability of rBO expressed in P. pastoris was significantly high compared to the authentic BO previously reported. Accordingly, a heterologous expression system of rBO to meet clinical and industrial needs was constructed.

Point Mutations at the Type I Cu Ligands, Cys457 and Met467, and at the Putative Proton Donor, Asp105, in Myrothecium verrucaria Bilirubin Oxidase and Reactions with Dioxygen

The type I Cu site in the Cys457Ser mutant of Myrothecium verrucaria bilirubin oxidase was vacant, but the trinuclear center composed of a type II Cu and a pair of type III Cu's was fully occupied by three Cu ions. Cys457Ser could react with dioxygen, affording reaction intermediate I with absorption maxima at 340, 470, and 675 nm. This intermediate corresponds to that obtained from laccase, whose type I Cu is cupric and type II and III Cu's are cuprous [Zoppellaro, G., Sakurai, T., and Huang, H. (2001) J. Biochem. 129, 949-953] or whose type I Cu is substituted with Hg [Palmer, A. E., Lee, S. K., and Solomon, E. I. (2001) J. Am. Chem. Soc. 123, 6591-6599]. Another type I Cu mutant, Met467Gln, with modified spectroscopic properties and redox potential, afforded reaction intermediate II with absorption maxima at 355 and 450 nm. This intermediate corresponds to that obtained during the reaction of laccase [Sundaram, U. M., Zhang, H. H., Hedman, B., Hodgson, K. O., and Solomon, E. I. (1997) J. Am. Chem. Soc. 119, 12525-12540; Huang, H., Zoppellaro, G., and Sakurai, T. (1999) J. Biol. Chem. 274, 32718-32724]. According to a three-dimensional model of bilirubin oxidase, Asp105 is positioned near the trinuclear center. Asp105Glu and Asp105Ala exhibited 46 and 7.5% bilirubin oxidase activity compared to the wild-type enzyme, respectively, indicating that Asp105 conserved in all multi-copper oxidases donates a proton to reaction intermediates I and II. In addition, this amino acid might be involved in the formation of the trinuclear center and in the binding of dioxygen based on the difficulties in incorporating four Cu ions in Asp105Ala and Asp105Asn and their reactions with dioxygen.

Characterization of alkaliphilic laccase activity in the culture supernatant ofMyrothecium verrucaria24G-4 in comparison with bilirubin oxidase

An enzyme showing alkaliphilic laccase activity was purified from the culture supernatant of Myrothecium verrucaria 24G-4. The enzyme was highly stable under alkaline conditions, showed an optimum reaction pH of 9.0 for 4-aminoantipyrine/phenol coupling, and decolorized synthetic dyes under alkaline conditions. It showed structural and catalytic similarities with bilirubin oxidase, but preferably oxidized phenolic compounds. The enzyme catalyzed veratryl alcohol oxidation at pH 9.0 with 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) as a mediator, suggesting that the laccase mediator system functioned well under alkaline conditions.

Authentic and recombinant bilirubin oxidases are in different resting forms

Myrothecium verrucaria bilirubin oxidase expressed in Aspergillus oryzae is in a resting form different from that of the authentic bilirubin oxidase, but reaches the resting form of the authentic enzyme after one cycle of reduction and reoxidation with dioxygen as shown by the absorption and electron paramagnetic resonance spectra.

Functional expression of a fungal laccase in Saccharomyces cerevisiae by directed evolution

Laccase from Myceliophthora thermophila (MtL) was expressed in functional form in Saccharomyces cerevisiae. Directed evolution improved expression eightfold to the highest yet reported for a laccase in yeast (18 mg/liter). Together with a 22-fold increase in k(cat), the total activity was enhanced 170-fold. Specific activities of MtL mutants toward 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid) and syringaldazine indicate that substrate specificity was not changed by the introduced mutations. The most effective mutation (10-fold increase in total activity) introduced a Kex2 protease recognition site at the C-terminal processing site of the protein, adjusting the protein sequence to the different protease specificities of the heterologous host. The C terminus is shown to be important for laccase activity, since removing it by a truncation of the gene reduces activity sixfold. Mutations accumulated during nine generations of evolution for higher activity decreased enzyme stability. Screening for improved stability in one generation produced a mutant more stable than the heterologous wild type and retaining the improved activity. The molecular mass of MtL expressed in S. cerevisiae is 30% higher than that of the same enzyme expressed in M. thermophila (110 kDa versus 85 kDa). Hyperglycosylation, corresponding to a 120-monomer glycan on one N-glycosylation site, is responsible for this increase. This S. cerevisiae expression system makes MtL available for functional tailoring by directed evolution.

Primary structure of a Japanese lacquer tree laccase as a prototype enzyme of multicopper oxidases

The cDNA library of the Japanese lacquer tree (Rhus vernicifera) was constructed by the reverse transcription of mRNA. A cDNA encoding laccase was amplified by PCR using primers based on the N-terminal amino acid sequences of the purified laccase and its peptide fragments formed by digestions with chymotrypsin and trypsin, and subcloned. The laccase cDNA clone contained a single, large open reading frame of 1599 nucleotides, encoding a protein of 533 amino acids with a calculated molecular mass of 58981 Da. The lacquer laccase was found to have 42 to 62% identity with other plant laccases and 20 to 24% identity with microorganism laccases at the deduced amino acid level. Differing from microorganism laccases the lacquer laccase utilizes a Met residue in addition to one Cys and two His residues to construct the type 1 Cu site. The secondary structure of the lacquer laccase was predicted to mainly consist of the beta-structure (28.7%) and loop and random structures (67.0%). The alpha-helix content was predicted to be only 4.3%. The location of these secondary structures was assumed to be very similar to those of ascorbate oxidase and fungal laccase, the crystal structures of which have been determined.

An oxygen cathode operating in a physiological solution

We report the electroreduction of O(2) to water under physiological conditions (pH 7.4, 0.15 M NaCl, 37.5 degrees C) at a current density of 5 mA cm(-2) and at a potential only 0.18 V reducing versus that of the reversible O(2)/H(2)O electrode at pH 7.4. The immobilized electrocatalyst enabling the reduction is the electrostatic adduct of bilirubin oxidase from Myrothecium verrucaria, a polyanion at pH >4.1, and the polycationic redox copolymer of polyacrylamide and poly (N-vinylimidazole) complexed with [Os (4,4'-dichloro-2,2'-bipyridine)(2)Cl](+/2+), cross-linked on carbon cloth. The current density of the rotating electrodes was O(2) transport limited up to 8.8 mA cm(-2); their kinetic limit was reached at 9.1 mA cm(-2). The operational life of the electrodes depended on their angular velocity, which defined not only the current density but also the mechanical shear stress stripping the electrocatalyst. When the electrodes were rotated at 300 rpm and were poised at -256 mV versus the potential of the reversible O(2)/H(2)O electrode, their 2.4 mA cm(-2) initial current density decreased to 1.3 mA cm(-2) after 6 days of continuous operation at 37.5 degrees C.

Cloning of a phenol oxidase gene from Acremonium murorum and its expression in Aspergillus awamori

Fungal multicopper oxidases have many potential industrial applications, since they perform reactions under mild conditions. We isolated a phenol oxidase from the fungus Acremonium murorum var. murorum that was capable of decolorizing plant chromophores (such as anthocyanins). This enzyme is of interest in laundry-cleaning products because of its broad specificity for chromophores. We expressed an A. murorum cDNA library in Saccharomyces cerevisiae and subsequently identified enzyme-producing yeast colonies based on their ability to decolor a plant chromophore. The cDNA sequence contained an open reading frame of 1,806 bp encoding an enzyme of 602 amino acids. The phenol oxidase was overproduced by Aspergillus awamori as a fusion protein with glucoamylase, cleaved in vivo, and purified from the culture broth by hydrophobic-interaction chromatography. The phenol oxidase is active at alkaline pH (the optimum for syringaldazine is pH 9) and high temperature (optimum, 60 degrees C) and is fully stable for at least 1 h at 60 degrees C under alkaline conditions. These characteristics and the high production level of 0.6 g of phenol oxidase per liter in shake flasks, which is equimolar with the glucoamylase protein levels, make this enzyme suitable for use in processes that occur under alkaline conditions, such as laundry cleaning.

Myrothecium verrucaria bilirubin oxidase and its mutants for potential copper ligands

Bilirubin oxidase (EC:1.3.3.5) purified from a culture medium of Myrothecium verrucaria MT-1 (authentic enzyme) catalyzes the oxidation of bilirubin to biliverdin in vitro and recombinant enzyme (wild type) was obtained by using an overexpression system of the bilirubin oxidase gene with Aspergillus oryzae harboring an expression vector. The absorption and ESR spectra showed that both bilirubin oxidases are multicopper oxidases containing type 1, type 2, and type 3 coppers similar to laccase, ascorbate oxidase, and ceruloplasmin. Site-directed mutagenesis has been performed for the possible ligands of each type of copper. In some mutants, Cys457 --> Val, Ala, His94 --> Val, and His134.136 --> Val, type 1 and type 2 copper centers were perturbed completely and the enzyme activity was completely lost. Differing from the holoenzyme, these mutants showed type 3 copper signals. However, the optical and magnetic properties characteristic of type 1 copper were retained even by mutating one of the type 1 copper ligands, i.e., a mutant, Met467 --> Gly, showed a weak but apparent enzyme activity. A double mutant His456.458 --> Val had only type 1 Cu, showing a blue band at 600 nm (epsilon = 1.6 x 10(3)) and an ESR signal with very narrow hyperfine splitting (A parallel = 7.2 x 10(-)3 cm-1). Since the type 2 and type 3 coppers are not present, the mutant did not show enzyme activity. These results strongly imply that the peculiar sequence in bilirubin oxidase, His456-Cys457-His458, forms an intramolecular electron-transfer pathway between the type 1 copper site and the trinuclear center composed of the type 2 and type 3 copper sites.

Structural comparison of cupredoxin domains: domain recycling to construct proteins with novel functions

The three-dimensional structures of the copper-containing enzymes ascorbate oxidase, ceruloplasmin, and nitrite reductase, comprised of multiple domains with a cupredoxin fold, are consistent with having evolved from a common ancestor. The presence or absence of copper sites has complicated ascertaining the structural and evolutionary relationship among these and related proteins. Simultaneous structural superposition of the enzyme domains and their known cupredoxin relatives shows clearly that there are at least six cupredoxin classes, and that the evolution of the conserved core of these domains is independent of the presence or absence of copper sites. Relationships among the variable loops in these structures show that the two-domain ancestor of the blue oxidases contained a trinuclear-copper interface but could not have functioned in a monomeric state. Comparison of the sequence of the copper-containing, iron-regulating protein. Ferrous transport (Fet3) from yeast to the structurally defined core and loop residues of the cupredoxins suggests specific residues that could be involved in the ferroxidase activity of Fet3.

A study of a series of recombinant fungal laccases and bilirubin oxidase that exhibit significant differences in redox potential, substrate specificity, and stability

A series of fungal laccases (Polyporus pinsitus, Rhizoctonia solani, Myceliophthora thermophila, Scytalidium thermophilum) and one bilirubin oxidase (Myrothecium verrucaria) have been studied to determine their redox potential, specificity, and stability. Polyporus and Rhizoctonia laccases possess potentials near 0.7-0.8 V (vs. NHE), while other oxidases have potentials near 0.5 V. It is observed that higher redox potential correlates with higher activity. By EPR, no significant change in the geometry of type 1 copper (II) site is observed over this series. At the optimal pH, the two substrates studied, 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulfonic acid) and syringaldazine, show Km values ranging form 10 to 120 and from 1 to 45 microM; and kcat values ranging from 50 to 16 000 and 200 to 3000 per min, respectively. The enzymes are more stable in the neutral-alkaline pH range. The thermal stability is in the order of bilirubin oxidase equivalent to Myceliophthora laccase equivalent to Scytalidium laccase > Polyporus laccase > Rhizoctonia laccase. Based on these results and the sequence alignments made against Zucchini ascorbate oxidase it is speculated that structural differences in the substrate-activation site (a 'blue', type 1 copper center) control the redox potential range as well as substrate specificity, and the cystine content contributes to stability.

Nucleotide sequence, transcriptional analysis, and glucose regulation of the phenoxazinone synthase gene (phsA) from Streptomyces antibioticus

The nucleotide sequence of a 2.3-kb SphI fragment containing the structural gene (phsA) for phenoxazinone synthase (PHS) of Streptomyces antibioticus was determined. The sequence was found to contain an open reading frame (ORF) with a G+C content of 71.5% oriented in the direction of transcription that was confirmed by primer extension. The ORF encodes a protein with an M(r) of 70,223 consisting of 642 amino acids and is preceded by a potential ribosome-binding site. The codon usage pattern is in agreement with the general pattern for streptomycete genes, with a 92.5 mol% G+C content in the third position. The N-terminal sequence of the mature PHS subunit corresponds exactly to that predicted from the nucleotide sequence. Neither ATG nor GTG initiator codons were identified for the protein. However, a TTG codon was located near the amino terminus of the mature protein and is a good candidate for the initiator codon. The transcriptional start point of phsA was located 36 bp upstream of the start codon by primer extension. The -10 region of the putative promoter showed some similarity to the consensus sequence for the major class of prokaryotic promoters, but the -35 region was less similar. Comparison of the primary amino acid sequence of PHS of S. antibioticus with other amino acid sequences indicated that PHS is a blue copper protein with copper binding domains in the N-terminal and C-terminal regions of the polypeptide chain. A BsrBI fragment containing the promoter region of phsA and a portion of the ORF was shown to promote xylE expression when cloned in the streptomycete promoter probe vector pIJ2843. This phsA promoter-dependent xylE expression could be repressed by glucose in S. antibioticus when the organism was grown on glucose or galactose plus glucose. Thus, the cloned promoter region appears to contain the sequences responsible for catabolite repression of PHS production.

Transcription stimulation of the adenovirus type 12 E1a gene in vitro by the 266-amino-acid E1A protein

We previously showed that the 13S but not the 12S mRNA product of the E1a gene of the highly oncogenic type 12 adenovirus (Ad12) stimulates the expression of its own gene. In this study, the mechanism for the autoregulation of the Ad12 E1a gene was investigated in vitro. The 266-amino-acid E1A protein of Ad12 was synthesized in yeast cells and purified as a 57-kDa polypeptide. The purified Ad12 E1A protein stimulated transcription from the proximal promoter of its own gene but had almost no effect on that from the distal promoter. A 35-bp upstream region including a TATA box for the proximal promoter seemed to be sufficient for transcription stimulation by the E1A protein. The Ad12 E1A protein formed a complex with a TATA box-binding protein (TBP), as does the E1A protein of nononcogenic Ad serotypes. Moreover, the E1A protein significantly reduced the binding of TBP to a TATA sequence, while it did not affect the DNA-binding activity of nuclear factor I, a stimulatory protein of the distal transcription of the Ad12 E1a gene. These results suggest that the 13S mRNA product of the Ad12 E1a gene regulates the transcription of its own gene by modulating the activity of TBP.

Conformation of bilirubin oxidase in native and denatured states

The conformation of bilirubin oxidase (EC 1.3.3.5) from Myrothecium verrucaria was studied by circular dichroism (CD). The far-UV CD spectrum showed a single minimum at 215 nm and a maximum near 198 nm, suggesting the dominance of beta-sheets. There was another negative band at 187 nm that is absent from the spectra of model alpha-helix or beta-sheet. CD analysis by the method of Chang et al. agreed well with the estimates based on the Chou and Fasman sequence-predictive method, but the Provencher-Glöckner method of CD analysis agreed well with the sequence-predictive method of Garnier et al. At pH 12 the 215- and 187-nm bands completely disappeared and the protein was denatured. This denaturation was accompanied by the appearance of a large positive band at 250 nm, probably due to ionization of tyrosine residues. In 20 mM sodium dodecyl sulfate the magnitude of the 215-nm band increased, but the spectrum transformed to that of partial helices after heating at 100 degrees C. In 6 M guanidine hydrochloride the far-UV CD spectrum was monotonic and became more negative at the lower wavelength limit (near 212 nm), suggesting that the secondary structure of the protein was disrupted. However, the near-UV CD spectrum retained residual aromatic bands even after heating at 100 degrees C. Thus, our denaturation studies suggest that bilirubin oxidase has a rigid tertiary structure.