The disulfide folding pathway of hirudin elucidated by stop/go folding experiments

From haemadin to haemanorm: Synthesis and characterization of full-length haemadin from the leech Haemadipsa sylvestris and of a novel bivalent, highly potent thrombin inhibitor (haemanorm)

Hirudin from Hirudo medicinalis is a bivalent α-Thrombin (αT) inhibitor, targeting the enzyme active site and exosite-I, and is currently used in anticoagulant therapy along with its simplified analogue hirulog. Haemadin, a small protein (57 amino acids) isolated from the land-living leech Haemadipsa sylvestris, selectively inhibits αT with a potency identical to that of recombinant hirudin (KI  = 0.2 pM), with which it shares a common disulfide topology and overall fold. At variance with hirudin, haemadin targets exosite-II and therefore (besides the free protease) it also blocks thrombomodulin-bound αT without inhibiting the active intermediate meizothrombin, thus offering potential advantages over hirudin. Here, we produced in reasonably high yields and pharmaceutical purity (>98%) wild-type haemadin and the oxidation resistant Met5 → nor-Leucine analogue, both inhibiting αT with a KI of 0.2 pM. Thereafter, we used site-directed mutagenesis, spectroscopic, ligand-displacement, and Hydrogen/Deuterium Exchange-Mass Spectrometry techniques to map the αT regions relevant for the interaction with full-length haemadin and with the synthetic N- and C-terminal peptides Haem(1-10) and Haem(45-57). Haem(1-10) competitively binds to/inhibits αT active site (KI  = 1.9 μM) and its potency was enhanced by 10-fold after Phe3 → β-Naphthylalanine exchange. Conversely to full-length haemadin, haem(45-57) displays intrinsic affinity for exosite-I (KD  = 1.6 μM). Hence, we synthesized a peptide in which the sequences 1-9 and 45-57 were joined together through a 3-Glycine spacer to yield haemanorm, a highly potent (KI  = 0.8 nM) inhibitor targeting αT active site and exosite-I. Haemanorm can be regarded as a novel class of hirulog-like αT inhibitors with potential pharmacological applications.

Co-translational formation of disulfides guides folding of the SARS-CoV-2 receptor binding domain

Many secreted proteins, including viral proteins, contain multiple disulfide bonds. How disulfide formation is coupled to protein folding in the cell remains poorly understood at the molecular level. Here, we combine experiment and simulation to address this question as it pertains to the SARS-CoV-2 receptor binding domain (RBD). We show that the RBD can only refold reversibly if its native disulfides are present before folding. But in their absence, the RBD spontaneously misfolds into a nonnative, molten-globule-like state that is structurally incompatible with complete disulfide formation and that is highly prone to aggregation. Thus, the RBD native structure represents a metastable state on the protein's energy landscape with reduced disulfides, indicating that nonequilibrium mechanisms are needed to ensure native disulfides form before folding. Our atomistic simulations suggest that this may be achieved via co-translational folding during RBD secretion into the endoplasmic reticulum. Namely, at intermediate translation lengths, native disulfide pairs are predicted to come together with high probability, and thus, under suitable kinetic conditions, this process may lock the protein into its native state and circumvent highly aggregation-prone nonnative intermediates. This detailed molecular picture of the RBD folding landscape may shed light on SARS-CoV-2 pathology and molecular constraints governing SARS-CoV-2 evolution.

Cotranslational formation of disulfides guides folding of the SARS COV-2 receptor binding domain

Many secreted proteins contain multiple disulfide bonds. How disulfide formation is coupled to protein folding in the cell remains poorly understood at the molecular level. Here, we combine experiment and simulation to address this question as it pertains to the SARS-CoV-2 receptor binding domain (RBD). We show that, whereas RBD can refold reversibly when its disulfides are intact, their disruption causes misfolding into a nonnative molten-globule state that is highly prone to aggregation and disulfide scrambling. Thus, non-equilibrium mechanisms are needed to ensure disulfides form prior to folding in vivo. Our simulations suggest that co-translational folding may accomplish this, as native disulfide pairs are predicted to form with high probability at intermediate lengths, ultimately committing the RBD to its metastable native state and circumventing nonnative intermediates. This detailed molecular picture of the RBD folding landscape may shed light on SARS-CoV-2 pathology and molecular constraints governing SARS-CoV-2 evolution.

Development of a Potential Yeast-Based Vaccine Platform for Theileria parva Infection in Cattle

East Coast Fever (ECF), caused by the tick-borne apicomplexan parasite Theileria parva, remains one of the most important livestock diseases in sub-Saharan Africa with more than 1 million cattle dying from infection every year. Disease prevention relies on the so-called "Infection and Treatment Method" (ITM), which is costly, complex, laborious, difficult to standardise on a commercial scale and results in a parasite strain-specific, MHC class I-restricted cytotoxic T cell response. We therefore attempted to develop a safe, affordable, stable, orally applicable and potent subunit vaccine for ECF using five different T. parva schizont antigens (Tp1, Tp2, Tp9, Tp10 and N36) and Saccharomyces cerevisiae as an expression platform. Full-length Tp2 and Tp9 as well as fragments of Tp1 were successfully expressed on the surface of S. cerevisiae. In vitro analyses highlighted that recombinant yeast expressing Tp2 can elicit IFNγ responses using PBMCs from ITM-immunized calves, while Tp2 and Tp9 induced IFNγ responses from enriched bovine CD8⁺ T cells. A subsequent in vivo study showed that oral administration of heat-inactivated, freeze-dried yeast stably expressing Tp2 increased total murine serum IgG over time, but more importantly, induced Tp2-specific serum IgG antibodies in individual mice compared to the control group. While these results will require subsequent experiments to verify induction of protection in neonatal calves, our data indicates that oral application of yeast expressing Theileria antigens could provide an affordable and easy vaccination platform for sub-Saharan Africa. Evaluation of antigen-specific cellular immune responses, especially cytotoxic CD8⁺ T cell immunity in cattle will further contribute to the development of a yeast-based vaccine for ECF.

The reduced form of the antibody CH2 domain

Among the immunoglobulin domains, the CH2 domain has the lowest thermal stability, which also depends on amino acid sequence and buffer conditions. To further identify factors that influence CH2 folding and stability, we characterized the domain in the reduced form using differential scanning fluorimetry and nuclear magnetic resonance. We show that the CH2 domain can fold, similarly to the disulfide-bridged form, without forming a disulfide-bridge, even though the protein contains two Cys residues. Although the reduced form exhibits thermal stability more than 15°C lower than the disulfide-bridged form, it does not undergo immediate full oxidization. To explain this phenomenon, we compared CH2 oxidization at different conditions and demonstrate a need for significant fluctuation of the folded conformation to enhance CH2 disulfide-bridge formation. We conclude that, since CH2 can be purified as a folded, semi-stable, reduced protein that can coexist with the oxidized form, verification of the level of oxidization at each step is critical in CH2 engineering studies.

Microparticles and Nanoparticles from Plants-The Benefits of Bioencapsulation

The efficacy of drugs and vaccines depends on their stability and ability to interact with their targets in vivo. Many drugs benefit from encapsulation, which protects them from harsh conditions and allows targeted delivery and controlled release. Although many encapsulation methods are inexpensive, such as the formulation of tablets for oral delivery, others require complex procedures that add significantly to production costs and require low-temperature transport and storage, making them inaccessible in developing countries. In this review we consider the benefits of encapsulation technologies based on plants. Plant-derived biopolymers such as starch and the maize storage protein zein are already used as protective coatings, but plant cells used as production host provide natural in vivo bioencapsulation that survives passage through the stomach and releases drugs in the intestine, due to the presence of microbes that can digest the cell wall. Proteins can also be encapsulated in subcellular compartments such as protein bodies, which ensure stability and activity while often conferring additional immunomodulatory effects. Finally, we consider the incorporation of drugs and vaccines into plant-derived nanoparticles assembled from the components of viruses. These are extremely versatile, allowing the display of epitopes and targeting peptides as well as carrying cargoes of drugs and imaging molecules.

Diselenide crosslinks for enhanced and simplified oxidative protein folding

The in vitro oxidative folding of proteins has been studied for over sixty years, providing critical insight into protein folding mechanisms. Hirudin, the most potent natural inhibitor of thrombin, is a 65-residue protein with three disulfide bonds, and is viewed as a folding model for a wide range of disulfide-rich proteins. Hirudin's folding pathway is notorious for its highly heterogeneous intermediates and scrambled isomers, limiting its folding rate and yield in vitro. Aiming to overcome these limitations, we undertake systematic investigation of diselenide bridges at native and non-native positions and investigate their effect on hirudin's folding, structure and activity. Our studies demonstrate that, regardless of the specific positions of these substitutions, the diselenide crosslinks enhanced the folding rate and yield of the corresponding hirudin analogues, while reducing the complexity and heterogeneity of the process. Moreover, crystal structure analysis confirms that the diselenide substitutions maintained the overall three-dimensional structure of the protein and left its function virtually unchanged. The choice of hirudin as a study model has implications beyond its specific folding mechanism, demonstrating the high potential of diselenide substitutions in the design, preparation and characterization of disulfide-rich proteins.

Flexible Folding: Disulfide-Containing Peptides and Proteins Choose the Pathway Depending on the Environments

In the last few decades, development of novel experimental techniques, such as new types of disulfide (SS)-forming reagents and genetic and chemical technologies for synthesizing designed artificial proteins, is opening a new realm of the oxidative folding study where peptides and proteins can be folded under physiologically more relevant conditions. In this review, after a brief overview of the historical and physicochemical background of oxidative protein folding study, recently revealed folding pathways of several representative peptides and proteins are summarized, including those having two, three, or four SS bonds in the native state, as well as those with odd Cys residues or consisting of two peptide chains. Comparison of the updated pathways with those reported in the early years has revealed the flexible nature of the protein folding pathways. The significantly different pathways characterized for hen-egg white lysozyme and bovine milk α-lactalbumin, which belong to the same protein superfamily, suggest that the information of protein folding pathways, not only the native folded structure, is encoded in the amino acid sequence. The application of the flexible pathways of peptides and proteins to the engineering of folded three-dimensional structures is an interesting and important issue in the new realm of the current oxidative protein folding study.

Effects of Metal Ions, Temperature, and a Denaturant on the Oxidative Folding Pathways of Bovine α-Lactalbumin

Bovine α-lactalbumin (αLA) has four disulfide (SS) bonds in the native form (N). On the oxidative folding pathways of this protein, two specific SS folding intermediates, i.e., (61–77, 73–91) and des[6–120], which have two and three native SS bonds, respectively, accumulate predominantly in the presence of Ca²⁺. In this study, we reinvestigated the pathways using a water-soluble cyclic selenoxide reagent, trans-3,4-dihydroxyselenolane oxide (DHS^ox), as a strong and quantitative oxidant to oxidize the fully reduced form (R). In the presence of ethylenediaminetetraacetic acid (EDTA) (under a metal-free condition), SS formation randomly proceeded, and N did not regenerate. On the other hand, two specific SS intermediates transiently generated in the presence of Ca²⁺. These intermediates could be assigned to (61–77, 73–91) and des[6–120] having two common SS bonds, i.e., Cys61-Cys77 and Cys73-Cys91, near the calcium binding pocket of the β-sheet domain. Much faster folding to N was observed in the presence of Mn²⁺, whereas Na⁺, K⁺, Mg²⁺, and Zn²⁺ did not affect the pathways. The two key intermediates were susceptible to temperature and a denaturant. The oxidative folding pathways revealed were significantly different from those of hen egg white lysozyme, which has the same SS-bonding pattern as αLA, suggesting that the folding pathways of SS-containing proteins can alter depending on the amino acid sequence and other factors, even when the SS-bond topologies are similar to each other.

Structural basis of RGD-hirudin binding to thrombin: Tyr3 and five C-terminal residues are crucial for inhibiting thrombin activity

Background

Hirudin is an anti-coagulation protein produced by the salivary glands of the medicinal leech Hirudomedicinalis. It is a powerful and specific thrombin inhibitor. The novel recombinant hirudin, RGD-hirudin, which contains an RGD motif, competitively inhibits the binding of fibrinogen to GPIIb/IIIa on platelets, thus inhibiting platelet aggregation while maintaining its anticoagulant activity.

Results

Recombinant RGD-hirudin and six mutant variants (Y3A, S50A, Q53A, D55A, E57A and I59A), designed based on molecular simulations, were expressed in Pichia pastoris. The proteins were refolded and purified to homogeneity as monomers by gel filtration and anion exchange chromatography. The anti-thrombin activity of the six mutants and RGD-hirudin was tested. Further, we evaluated the binding of the mutant variants and RGD-hirudin to thrombin using BIAcore surface plasmon resonance analysis (SPR). Kinetics and affinity constants showed that the K_D values of all six mutant proteins were higher than that of RGD-hirudin.

Conclusions

These findings contribute to a novel understanding of the interaction between RGD-hirudin and thrombin.

Association between foldability and aggregation propensity in small disulfide-rich proteins

AIMS

Disulfide-rich domains (DRDs) are small proteins whose native structure is stabilized by the presence of covalent disulfide bonds. These domains are versatile and can perform a wide range of functions. Many of these domains readily unfold on disulfide bond reduction, suggesting that in the absence of covalent bonding they might display significant disorder.

RESULTS

Here, we analyzed the degree of disorder in 97 domains representative of the different DRDs families and demonstrate that, in terms of sequence, many of them can be classified as intrinsically disordered proteins (IDPs) or contain predicted disordered regions. The analysis of the aggregation propensity of these domains indicates that, similar to IDPs, their sequences are more soluble and have less aggregating regions than those of other globular domains, suggesting that they might have evolved to avoid aggregation after protein synthesis and before they can attain its compact and covalently linked native structure.

INNOVATION AND CONCLUSION

DRDs, which resemble IDPs in the reduced state and become globular when their disulfide bonds are formed, illustrate the link between protein folding and aggregation propensities and how these two properties cannot be easily dissociated, determining the main traits of the folding routes followed by these small proteins to attain their native oxidized states.

Chemical methods for producing disulfide bonds in peptides and proteins to study folding regulation

Disulfide bonds play a critical role in the folding of secretory and membrane proteins. Oxidative folding reactions of disulfide bond-containing proteins typically require several hours or days, and numerous misbridged disulfide isomers are often observed as intermediates. The rate-determining step in refolding is thought to be the disulfide-exchange reaction from nonnative to native disulfide bonds in folding intermediates, which often precipitate during the refolding process because of their hydrophobic properties. To overcome this, chemical additives or a disulfide catalyst, protein disulfide isomerase (PDI), are generally used in refolding experiments to regulate disulfide-coupled peptide and protein folding. This unit describes such methods in the context of the thermodynamic and kinetic control of peptide and protein folding, including (1) regulation of disulfide-coupled peptides and protein folding assisted by chemical additives, (2) reductive unfolding of disulfide-containing peptides and proteins, and (3) regulation of disulfide-coupled peptide and protein folding using PDI.

Diversity and selective pressures of anticoagulants in three medicinal leeches (Hirudinida: Hirudinidae, Macrobdellidae)

Although medicinal leeches have long been used as treatment for various ailments because of their potent anticoagulation factors, neither the full diversity of salivary components that inhibit coagulation, nor the evolutionary selection acting on them has been thoroughly investigated. Here, we constructed expressed sequence tag libraries from salivary glands of two species of medicinal hirudinoid leeches, Hirudo verbana and Aliolimnatis fenestrata, and identified anticoagulant-orthologs through BLASTx searches. The data set then was augmented by the addition of a previously constructed EST library from the macrobdelloid leech Macrobdella decora. The identified orthologs then were compared and contrasted with well-characterized anticoagulants from a variety of leeches with different feeding habits, including non-sanguivorous species. Moreover, four different statistical methods for predicting signatures of positive and negative evolutionary pressures were used for 10 rounds each to assess the level and type of selection acting on the molecules as a whole and on specific sites. In total, sequences showing putative BLASTx-orthology with five and three anticoagulant-families were recovered in the A. fenestrata and H. verbana EST libraries respectively. Selection pressure analyses predicted high levels of purifying selection across the anticoagulant diversity, although a few isolated sites showed signatures of positive selection. This study represents a first attempt at mapping the anticoagulant repertoires in a comparative fashion across several leech families.

A water-soluble selenoxide reagent as a useful probe for the reactivity and folding of polythiol peptides

A water-soluble selenoxide (DHS^ox) having a five-membered ring structure enables rapid and selective conversion of cysteinyl SH groups in a polypeptide chain into SS bonds in a wide pH and temperature range. It was previously demonstrated that the second-order rate constants for the SS formation with DHS^ox would be proportional to the number of the free SH groups present in the substrate if there is no steric congestion around the SH groups. In the present study, kinetics of the SS formation with DHS^ox was extensively studied at pH 4–10 and 25 °C by using reduced ribonuclease A, recombinant hirudin variant (CX-397), insulin A- and B-chains, and relaxin A-chain, which have two to eight cysteine residues, as polythiol substrates. The obtained rate constants showed stochastic SS formation behaviors under most conditions. However, the rate constants for CX-397 at pH 8.0 and 10.0 were not proportional to the number of the free SH groups, suggesting that the SS intermediate ensembles possess densely packed structures under weakly basic conditions. The high two-electron redox potential of DHS^ox (375 mV at 25 °C) compared to l-cystine supported the high ability of DHS^ox for SS formation in a polypeptide chain. Interestingly, the rate constants of the SS formation jumped up at a pH around the pK_a value of the cysteinyl SH groups. The SS formation velocity was slightly decreased by addition of a denaturant due probably to the interaction between the denaturant and the peptide. The stochastic behaviors as well as the absolute values of the second-order rate constants in comparison to dithiothreitol (DTT^red) are useful to probe the chemical reactivity and conformation, hence the folding, of polypeptide chains.

Glutathione ethylester, a novel protein refolding reagent, enhances both the efficiency of refolding and correct disulfide formation

Protein refolding constitutes a crucial process for recombinant proteins. We report here on the development of a multifunctional refolding additive, glutathione ethyl ester (GSHEE), prepared from a redox reagent glutathione and an amino acid ethyl ester, an aggregation suppressor. Compared to glutathione, GSHEE showed 3.2-fold higher efficiency for the refolding yield of hen egg lysozyme. More importantly, a low concentration of GSHEE is more effective for refolding than conventional additives, such as amino acid ethyl esters by two orders of magnitude. The high potency of GSHEE makes it a candidate for use as a refolding additive for use in conjunction with reduced and denatured proteins.

Kinetic and thermodynamic analysis of the conformational folding process of SS-reduced bovine pancreatic ribonuclease A using a selenoxide reagent with high oxidizing ability

Redox-coupled folding pathways of bovine pancreatic ribonuclease A (RNase A) with four intramolecular disulfide (SS) bonds comprise three phases: (I) SS formation to generate partially oxidized intermediate ensembles with no rigid folded structure; (II) SS rearrangement from the three SS intermediate ensemble (3S) to the des intermediates having three native SS linkages; (III) final oxidation of the last native SS linkage to generate native RNase A. We previously demonstrated that DHS^ox, a water-soluble selenoxide reagent for rapid and quantitative SS formation, allows clear separation of the three folding phases. In this study, the main conformational folding phase (phase II) has been extensively analyzed at pH 8.0 under a wide range of temperatures (5–45 °C), and thermodynamic and kinetic parameters for the four des intermediates were determined. The free-energy differences (ΔG) as a function of temperature suggested that the each SS linkage has different thermodynamic and kinetic roles in stability of the native structure. On the other hand, comparison of the rate constants and the activation energies for 3S → des with those reported for the conformational folding of SS-intact RNase A suggested that unfolded des species (desU) having three native SS linkages but not yet being folded are involved in very small amounts (<1%) in the 3S intermediate ensemble and the desU species would gain the native-like structures via X-Pro isomerization like SS-intact RNase A. It was revealed that DHS^ox is useful for kinetic and thermodynamic analysis of the conformational folding process on the oxidative folding pathways of SS-reduced proteins.

Selecting highly structure-specific antibodies using structured synthetic mimics of the cystine knot protein sclerostin

Antibodies directed against specific regions of a protein have traditionally been raised against full proteins, protein domains or simple unstructured peptides, containing contiguous stretches of primary sequence. We have used a new approach of selecting antibodies against restrained peptides mimicking defined epitopes of the bone modulator protein sclerostin, which has been identified as a negative regulator of the Wnt pathway. For a fast exploration of activity defining epitopes, we produced a set of synthetic peptide constructs mimicking native sclerostin, in which intervening loops from the cystine-knot protein sclerostin were truncated and whose sequences were optimized for fast and productive refolding. We found that the second loop within the cystine knot could be replaced by unnatural sequences, both speeding up folding, and increasing yield. Subsequently, we used these constructs to pan the HuCAL phage display library for antibodies capable of binding the native protein, thereby restricting recognition to the desired epitope regions. It is shown that the antibodies that were obtained recognize a complex epitope in the protein that cannot be mimicked with linear peptides. Antibodies selected against peptides show similar recognition specificity and potency as compared with antibodies obtained from full-length recombinant protein.

Diverse pathways of oxidative folding of disulfide proteins: underlying causes and folding models

The pathway of oxidative folding of disulfide proteins exhibits a high degree of diversity, which is manifested mainly by distinct structural heterogeneity and diverse rearrangement pathways of folding intermediates. During the past two decades, the scope of this diversity has widened through studies of more than 30 disulfide-rich proteins by various laboratories. A more comprehensive landscape of the mechanism of protein oxidative folding has emerged. This review will cover three themes. (1) Elaboration of the scope of diversity of disulfide folding pathways, including the two opposite extreme models, represented by bovine pancreatic trypsin inhibitor (BPTI) and hirudin. (2) Demonstration of experimental evidence accounting for the underlying mechanism of the folding diversity. (3) Discussion of the convergence between the extreme models of oxidative folding and models of conventional conformational folding (framework model, hydrophobic collapse model).

Acceleration of disulfide-coupled protein folding using glutathione derivatives

Protein folding occurs simultaneously with disulfide bond formation. In general, the in vitro folding of proteins containing disulfide bond(s) is carried out in the presence of redox reagents, such as glutathione, to permit native disulfide pairing to occur. It is well known that the formation of a disulfide bond and the correct tertiary structure of a target protein are strongly affected by the redox reagent used. However, little is known concerning the role of each amino acid residue of the redox reagent, such as glutathione. Therefore, we prepared glutathione derivatives - glutamyl-cysteinyl-arginine (ECR) and arginyl-cysteinyl-glycine (RCG) - and examined their ability to facilitate protein folding using lysozyme and prouroguanylin as model proteins. When the reduced and oxidized forms of RCG were used, folding recovery was greater than that for a typical glutathione redox system. This was particularly true when high protein concentrations were employed, whereas folding recovery using ECR was similar to that of the glutathione redox system. Kinetic analyses of the oxidative folding of prouroguanylin revealed that the folding velocity (K(RCG) = 3.69 × 10(-3) s(-1)) using reduced RCG/oxidized RCG was approximately threefold higher than that using reduced glutathione/oxidized glutathione. In addition, folding experiments using only the oxidized form of RCG or glutathione indicated that prouroguanylin was converted to the native conformation more efficiently in the case of RCG, compared with glutathione. The findings indicate that a positively charged redox molecule is preferred to accelerate disulfide-exchange reactions and that the RCG system is effective in mediating the formation of native disulfide bonds in proteins.

Protease inhibitors as models for the study of oxidative folding

The correct balance between proteases and their natural protein inhibitors is of great importance in living systems. Protease inhibitors usually comprise small folds that are crosslinked by a high number of disulfide bonds, making them perfect models for the study of oxidative folding. To date, the oxidative folding of numerous protease inhibitors has been analyzed, revealing a great diversity of folding pathways that differ mainly in the heterogeneity and native disulfide-bond content of their intermediates. The two extremes of this diversity are represented by bovine pancreatic trypsin inhibitor and hirudin, which fold, respectively, via few native intermediates and heterogeneous scrambled isomers. Other proteins, such as leech carboxypeptidase inhibitor, share characteristics of both models displaying mixed folding pathways. The study of the oxidative folding of two-domain inhibitors, such as secretory leukocyte protease inhibitor, tick carboxypeptidase inhibitor, and Ascaris carboxypeptidase inhibitor, has provided some clues about how two-domain protease inhibitors may fold, that is, either by folding each domain autonomously or with one domain assisting in the folding of the other. Finally, the recent determination of the structures of the major intermediates of protease inhibitors has shed light on the molecular mechanisms guiding the oxidative folding of small disulfide-rich proteins.

Distinct folding pathways of two homologous disulfide proteins: bovine pancreatic trypsin inhibitor and tick anticoagulant peptide

The folding pathways of disulfide proteins vary substantially (Arolas et al., Trends Biochem Sci 31: 292-301, 2006). The diversity is mainly manifested by (a) the extent of heterogeneity of folding intermediates, (b) the extent of presence of native-like intermediates, and (c) the variation of folding kinetics. Even among structurally similar proteins, the difference can be enormous. This is demonstrated in this concise review with two structurally homologous kunitz-type protease inhibitors, bovine pancreatic trypsin inhibitor and tick anticoagulant peptide, as well as a group of cystine knot proteins. The diversity of their folding mechanisms is illustrated with two different folding techniques: (a) the conventional method of disulfide oxidation (oxidative folding), and (b) the novel method of disulfide scrambling (Chang, J Biol Chem 277: 120-126, 2002). This review also highlights the convergence of folding models concluded form the conventional conformational folding and those obtained by oxidative folding.

Rapid and quantitative disulfide bond formation for a polypeptide chain using a cyclic selenoxide reagent in an aqueous medium

To elucidate the reaction mechanism of the disulfide (SS) bond formation reaction of a polypeptide molecule with a water-soluble selenoxide reagent, trans-3,4-dihydroxyselenolane oxide (DHS(ox)), short-term oxidation experiments were carried out for the reduced state (R) of a recombinant hirudin CX-397 variant at pH 7.0 and 25 °C. In the reaction, R was oxidized sequentially to one-SS, two-SS, and three-SS intermediate ensembles within 1 min. The kinetic analysis revealed that the three second-order rate constants for the SS formation are proportional to the number of thiol groups existing in the reactant SS intermediates, indicating the stochastic nature of the SS formation. Ab initio calculation at the HF/6-31++G(d,p) level in water by using the polarizable continuum model suggested that the SS formation reaction is highly exothermic and proceeds via a reactive thioselenurane intermediate with a distorted linear O-Se-S linkage. The results clearly demonstrated that the rate-determining step of the SS formation reaction is the first bimolecular process between a thiol substrate and DHS(ox) rather than the subsequent process to release a SS product.

Characterization of kinetic and thermodynamic phases in the prefolding process of bovine pancreatic ribonuclease A coupled with fast SS formation and SS reshuffling

In the redox-coupled oxidative folding of a protein having several SS bonds, two folding phases are usually observed, corresponding to SS formation (oxidation) with generation of weakly stabilized heterogeneous structures (a chain-entropy losing phase) and the subsequent intramolecular SS rearrangement to search for the native SS linkages (a conformational folding phase). By taking advantage of DHS(ox) as a highly strong and selective oxidant, the former SS formation phase was investigated in detail in the oxidative folding of RNase A. The folding intermediates obtained at 25 °C and pH 4.0 within 1 min (1S°-4S°) showed different profiles in the HPLC chromatograms from those of the intermediates obtained at pH 7.0 and 10.0 (1S-4S). However, upon prolonged incubation at pH 4.0 the profiles of 1S°-3S° transformed slowly to those similar to 1S-3S intermediate ensembles via intramolecular SS reshuffling, accompanying significant changes in the UV and fluorescence spectra but not in the CD spectrum. Similar conversion of the intermediates was observed by pH jump from 4.0 to 8.0, while the opposite conversion from 1S-4S was observed by addition of guanidine hydrochloride to the folding solution at pH 8.0. The results demonstrated that the preconformational folding phase coupled with SS formation can be divided into two distinct subphases, a kinetic (or stochastic) SS formation phase and a thermodynamic SS reshuffling phase. The transition from kinetically formed to thermodynamically stabilized SS intermediates would be induced by hydrophobic nucleation as well as generation of the native interactions.

Diselenides as universal oxidative folding catalysts of diverse proteins

Small-molecule diselenides show considerable potential as catalysts of oxidative protein folding. To explore their scope, diselenide-containing redox buffers were used to promote the folding of proteins that varied in properties such as size, overall tertiary structure, number of disulfide bonds, pI value, and difficulty of in vitro folding. Diselenides are able to catalyze the oxidative folding of all proteins tested, providing significant increases in both rate and yield relative to analogous disulfides. Compared to the disulfide-linked dimer of glutathione (the most commonly used oxidant for in vitro protein folding), selenoglutathione provided markedly improved efficiencies in the folding of biotechnologically important proteins such as hirudin, lysozyme, human epidermal growth factor and interferon α-2a. Selenoglutathione also enhances the renaturation of more challenging targets such as bovine serum albumin, whose native state contains 17 disulfide bonds, and the Fab fragment of an antibody. In the latter case, micromolar amounts of selenoglutathione are able to match the modest yield provided by a previously optimized redox buffer, which contains millimolar levels of glutathione. Taken together, the folding reactions of these diverse proteins exemplify the advantages and limitations of diselenide catalysts.

Disulfide-linked protein folding pathways

Determining the mechanism by which proteins attain their native structure is an important but difficult problem in basic biology. The study of protein folding is difficult because it involves the identification and characterization of folding intermediates that are only very transiently present. Disulfide bond formation is thermodynamically linked to protein folding. The availability of thiol trapping reagents and the relatively slow kinetics of disulfide bond formation have facilitated the isolation, purification, and characterization of disulfide-linked folding intermediates. As a result, the folding pathways of several disulfide-rich proteins are among the best known of any protein. This review discusses disulfide bond formation and its relationship to protein folding in vitro and in vivo.

The in vitro oxidative folding of the insulin superfamily

Insulin and related proteins, which have been found not only in mammals, birds, reptiles, amphibians, fish, and cephalochordate, but also in mollusca, insects, and Caenorhabditis elegans, form a large protein family, the insulin superfamily. In comparing their amino acid sequences, a common sequence characteristic, the insulin structural motif, is found in all members of the superfamily. The structural motif is deduced to be the sequence basis of the identical disulfide linkages and similar three-dimensional structures of the superfamily. The insulin superfamily provides a series of disulfide-containing proteins for the studies of in vitro oxidative folding. The in vitro folding pathways of insulin-like growth factor-1 (IGF-1), porcine insulin precursor (PIP), human proinsulin, and Amphioxus insulin-like peptide (AILP) have been established by capture and analysis of the folding intermediates during their in vitro oxidative folding process. The family also provides an excellent system for study of the sequence structure relation: insulin and IGF-1 share high amino acid sequence homology, but they have evolved different folding behaviors. The sequence determinants of their different folding behaviors have been revealed by analyzing the folding behaviors of those global and local insulin/IGF-1 hybrids.

Oxidative folding of leech-derived tryptase inhibitor via native disulfide-bonded intermediates

Leech-derived tryptase inhibitor (LDTI), comprising 46 residues and a fold stabilized by three disulfide bonds, is the only protein known to inhibit human beta-tryptase with high affinity. The present work examines its oxidative folding and reductive unfolding with chromatographic and disulfide analysis of the trapped intermediates. LDTI folds and unfolds through a sequential oxidation of its cysteine residues that give rise to the accumulation of a few one- and two-disulfide intermediates. Three species containing two native disulfide bonds (IIa, IIb, and IIc) are detected in LDTI folding, but only one (IIb) seems to be productive and oxidizes into the native structure. Stop/go experiments indicate that the intermediates IIa and IIc must reduce or rearrange their disulfide bonds to reach the productive route. The acquisition of the native structure is extremely fast and efficient, probably influenced by the low levels of non-native three-disulfide (scrambled) isomers occurring along the reaction. Finally, the Cys14-Cys40 disulfide bond, buried in native LDTI and formed in IIa and IIb intermediates, appears to be a key factor for both the initiation of folding and the stability of this molecule. Together, the derived data provide a molecular basis for development of new LDTI variants with altered properties.

Diversity of folding pathways and folding models of disulfide proteins

Comprehensive understanding of the mechanism of protein folding requires the elucidation of both a folding pathway and a folding model. This entails characterization of the properties and structures of folding intermediates populated along the folding pathway, as well as the formation and interplay of secondary structures and tertiary structures along the course of folding. Using the conventional unfolding-refolding technique, there are limitations of acquiring these data in detail because of the inherent difficulty of trapping and analysis of folding intermediates. The technique of oxidative folding, in contrast, permits trapping, isolation, and further structural characterization of folding intermediates at any stage of the folding process. In this brief review, we present the potential of the technique of oxidative folding for concurrent analysis of both folding pathways and folding models.

Pathway of oxidative folding of a 3-disulfide alpha-lactalbumin may resemble either BPTI model or hirudin model

Pathways of oxidative folding of disulfide proteins display a high degree of diversity and vary among two extreme models. The BPTI model is defined by limited species of folding intermediates adopting mainly native disulfide bonds. The hirudin model is characterized by highly heterogeneous folding intermediates containing mostly non-native disulfide bonds. alphaLA-IIIA is a 3-disulfide variant of alpha-lactalbumin (alphaLA) with a 3-D conformation essentially identical to that of intact alphaLA. alphaLA-IIIA contains 3 native disulfide bonds of alphaLA, two of them are located at the calcium binding beta-subdomain (Cys61-Cys77 and Cys73-Cys91) and the third bridge is located within the alpha-helical domain of the molecule (Cys28-Cys111). We investigate here the pathway of oxidative folding of fully reduced alphaLA-IIIA with and without stabilization of its beta-subdomain by calcium binding. In the absence of calcium, the folding pathway of alphaLA-IIIA was shown to resemble that of hirudin model. Upon stabilization of beta-sheet domain by calcium binding, the folding pathway of alphaLA-IIIA exhibits a striking similarity to that of BPTI model. Three predominant folding intermediates of alphaLA-IIIA containing exclusively native disulfide bonds were isolated and structurally characterized. Our results further demonstrate that stabilization of subdomains in a protein may dictate its folding pathway and represent a major cause for the existing diversity in the folding pathways of the disulfide-containing proteins.

Pathway of Oxidative Folding of Bovine α-Interferon: Predominance of Native Disulfide-Bonded Folding Intermediates

Bovine alpha-interferon (BoINF-alpha) is a single polypeptide protein containing 166 amino acids, two disulfide bonds (Cys1-Cys99 and Cys29-Cys138), and five stretches of alpha-helical structure. The pathway of oxidative folding of BoINF-alpha has been investigated here. Of the eight possible one- and two-disulfide isomers, only two nativelike one-disulfide isomers, BoINF-alpha (Cys1-Cys99) and BoINF-alpha (Cys29-Cys138), predominate as intermediates along the folding pathway. More strikingly, alpha-helical structures formed almost quantitatively before any detectable formation of a disulfide bond. This is demonstrated by the observation that fully reduced BoINF-alpha (starting material of oxidative folding) and reduced carboxymethylated BoINF-alpha both exhibit alpha-helical structure content indistinguishable form that of native BoINF-alpha. The folding mechanism of BoINF-alpha appears to be compatible with the framework model, in which secondary structures fold first, followed by docking (compaction) of preformed secondary structural elements yielding the native structure.

Characterizing the tick carboxypeptidase inhibitor: molecular basis for its two-domain nature

Tick carboxypeptidase inhibitor (TCI) is a small, disulfide-rich protein that selectively inhibits metallocarboxypeptidases and strongly accelerates the fibrinolysis of blood clots. TCI consists of two domains that are structurally very similar, each containing three disulfide bonds arranged in an almost identical fashion. The oxidative folding and reductive unfolding pathways of TCI and its separated domains have been characterized by kinetic and structural analysis of the acid-trapped folding intermediates. TCI folding proceeds through a sequential formation of 1-, 2-, 3-, 4-, 5-, and 6-disulfide species to reach the native form. Folding intermediates of TCI comprise two predominant 3-disulfide species (named IIIa and IIIb) and a major 6-disulfide scrambled isomer (Xa) that consecutively accumulate along the reaction and are strongly prevented by the presence of protein disulfide isomerase. This study demonstrates that IIIa and IIIb are 3-disulfide species containing the native disulfide pairings of the N- and C-terminal domains of TCI, respectively, and explains why the two domains of TCI fold sequentially and independently. Also, we show that the reductive unfolding of TCI undergoes two main independent unfolding events through the formation of IIIa and IIIb intermediates. Together, the comparison of the folding, stability, and inhibitory activity of TCI with those of the isolated domains reveals the reasons behind the two-domain nature of this protein: both domains contribute to the specificity and high affinity of its double-headed binding to carboxypeptidases. The results obtained herein provide valuable information for the design of more potent and selective TCI molecules.

The reduced, denatured somatomedin B domain of vitronectin refolds into a stable, biologically active molecule

The high-affinity binding site in human vitronectin (VN) for plasminogen activator inhibitor-1 (PAI-1) has been localized to the NH(2)-terminal cysteine-rich somatomedin B (SMB) domain (residues 1-44). A number of published structural and biochemical studies show conflicting results for the disulfide bonding pattern and the overall fold of the SMB domain, possibly because this domain may undergo disulfide shuffling and/or conformational changes during handling. Here we show that bacterially expressed recombinant SMB (rSMB) can be refolded to a single form that shows maximal activity in binding to PAI-1 and to a conformation-dependent monoclonal antibody (mAb 153). The oxidative refolding pathway of rSMB can be followed in the presence of glutathione redox buffers. This approach allowed the isolation and analysis of a number of intermediate folding species and of the final stably folded species at equilibrium. Competitive surface plasmon resonance analysis demonstrated that the stably refolded rSMB regained biological activity since it bound efficiently to PAI-1 and to mAb 153. In contrast, none of the folding intermediates bound to PAI-1 or to mAb 153. We also show by NMR analysis that the stably refolded rSMB is identical to the material used for the solution structure determination [Kamikubo et al. (2004) Biochemistry 43, 6519] and that it binds specifically to mAb 153 via an interface that includes the three aromatic side chains previously implicated in binding to PAI-1.

Pathway of Oxidative Folding of Secretory Leucocyte Protease Inhibitor: An 8-Disulfide Protein Exhibits a Unique Mechanism of Folding

Secretory leucocyte protease inhibitor (SLPI) is a 107-amino acid protein with a high density of disulfide pairing (eight). The mechanism of oxidative folding of reduced and denatured SLPI has been investigated here. Despite an exceedingly large number of possible folding intermediates ( approximately 46 million disulfide isomers) and their potential to complicate the refolding process, oxidative folding of SLPI turns out to be surprisingly simple and efficient. Complete oxidative folding and a near-quantitative recovery of the native SLPI can be achieved in a simple buffer solution using air oxidation without any supplementing thiol catalyst or redox agent, a phenomenon that has not yet been observed with other disulfide proteins. Because of the heterogeneity and extensive overlapping of folding intermediates, identification of the predominant intermediate was unfeasible. Nonetheless, studies of reductive unfolding of native SLPI and oxidative folding of a six-disulfide variant of SLPI enable us to propose an underlying mechanism accounting for the unique folding efficiency of SLPI in the absence of a redox agent. Our studies indicate that oxidative folding of SLPI undergoes heterogeneous populations of one-, two-, three-, four-, five-, six-, and seven-disulfide isomers, including two nativelike isomers, SLPI-6A and SLPI-7A, as transient intermediates. Formation of the last two native disulfide bonds leading to the conversion of SLPI-6A --> SLPI-7A --> N-SLPI is relatively slow and represents the final stage of oxidative folding. Most importantly, free cysteines of SLPI-6A and SLPI-7A also act as a thiol catalyst in promoting the disulfide shuffling of diverse non-native intermediates accumulated along the folding pathway. This explains why a near-quantitative recovery of N-SLPI can be achieved in the absence of any thiol catalyst and redox agent. Properties of SLPI-6A and SLPI-7A were investigated and compared to those of other documented kinetic intermediates of oxidative folding. The correlation between the mechanism of SLPI folding and the three-dimensional structure of SLPI is also elaborated.

Folding of small disulfide-rich proteins: clarifying the puzzle

The process by which small proteins fold to their native conformations has been intensively studied over the past few decades. The particular chemistry of disulfide-bond formation has facilitated the characterization of the oxidative folding of numerous small, disulfide-rich proteins with results that illustrate a high level of diversity in folding mechanisms, differing in the heterogeneity and native disulfide-bond content of their intermediates. Information from folding studies of these proteins, together with the recent structural determinations of predominant intermediates, has provided new molecular insights into oxidative folding and clarifies the major rules that govern it.

Oxidative folding of hirudin in human serum

Human serum contains factors that promote oxidative folding of disulphide proteins. We demonstrate this here using hirudin as a model. Hirudin is a leech-derived thrombin-specific inhibitor containing 65 amino acids and three disulphide bonds. Oxidative folding of hirudin in human serum is shown to involve an initial phase of rapid disulphide formation (oxidation) to form the scrambled isomers as intermediates. This is followed by the stage of slow disulphide shuffling of scrambled isomers to attain the native hirudin. The kinetics of regenerating the native hirudin depend on the concentrations of both hirudin and human serum. Quantitative regeneration of native hirudin in undiluted human serum can be completed within 48 h, without any redox supplement. These results cannot be adequately explained by the existing oxidized thiol agents in human serum or the macromolecular crowding effect, and therefore indicate that human serum may contain yet to be identified potent oxidase(s) for assisting protein folding.

Fully oxidized scrambled isomers are essential and predominant folding intermediates of cardiotoxin-III

Scrambled isomers (X-isomers) are fully oxidized, non-native isomers of disulfide proteins. They have been shown to represent important intermediates along the pathway of oxidative folding of numerous disulfide proteins. A simple method to assess whether X-isomers present as folding intermediate is to conduct oxidative folding of fully reduced protein in the alkaline buffer alone without any supplementing thiol catalyst or redox agent. Cardiotoxin-III (CTX-III) contains 60 amino acids and four disulfide bonds. The mechanism of oxidative folding of CTX-III has been systematically characterized here by analysis of the acid trapped folding intermediates. Folding of CTX-III was shown to proceed sequentially through 1-disulfide, 2-disulfide, 3-disulfide and 4-disulfide (scrambled) isomers as folding intermediates to reach the native structure. When folding of CTX-III was performed in the buffer alone, more than 97% of the protein was trapped as 4-disulfide X-isomers, unable to convert to the native structure due to the absence of thiol catalyst. In the presence of thiol catalyst (GSH) or redox agents (GSH/GSSG), the recovery of native CTX-III was 80-85%. These results demonstrate that X-isomers play an essential and predominant role in the oxidative folding of CTX-III.

Isomers of Epidermal Growth Factor with Ser ⇒ Cys Mutation at the N-Terminal Sequence: Isomerization, Stability, Unfolding, Refolding, and Structure

The structure of human epidermal growth factor (EGF, 53 amino acids) comprises three distinct loops (A, B, and C) connected correspondingly by the three native disulfide bonds, Cys(6)-Cys(20), Cys(14)-Cys(31), and Cys(33)-Cys(42). The connection of Cys(6) and Cys(20) forming the N-terminal A loop is essential for the biological activity of EGF [Barnham et al. (1998) Protein Sci. 7, 1738-1749] and has also been shown to represent a major kinetic trap in the oxidative folding of EGF [Chang et al. (2001) J. Biol. Chem. 276, 4845-4852]. To further understand the chemical nature of this kinetic trap, we have prepared three EGF mutants each with a single Ser --> Cys mutation at Ser residues (Ser(2), Ser(4), and Ser(9)) flanking Cys(6). This allows competition between Cys(6) and mutated Cys(2), Cys(4), and Cys(9) to link with Cys(20) and to form EGF isomers containing different sizes of the A loop. The results show that, in the cases of EGF(S2C) and EGF(S4C), native Cys(6)-Cys(20) is favored over Cys(2)-Cys(20) and Cys(4)-Cys(20) by 4.5- and 9-fold, respectively, in the state of equilibrium. However, in the case of EGF(S9C), a non-native Cys(9)-Cys(20) is thermodynamically more stable than the native Cys(6)-Cys(20) by a free-energy difference (DeltaG degrees ) of 1.12 kcal/mol. Implications of these data in the formation of kinetic trap of EGF folding are discussed. Stabilized isomers of EGF were further generated from denaturation of wild-type and mutant EGF via the method of disulfide scrambling. Properties of these diverse isomers of EGF, including their isomerization, stability, unfolding, refolding, and disulfide structures, are described in this paper.

Study of a Major Intermediate in the Oxidative Folding of Leech Carboxypeptidase Inhibitor: Contribution of the Fourth Disulfide Bond

The oxidative folding pathway of leech carboxypeptidase inhibitor (LCI; four disulfide bonds) proceeds through the formation of two major intermediates (III-A and III-B) that contain three native disulfide bonds and act as strong kinetic traps in the folding process. The III-B intermediate lacks the Cys19-Cys43 disulfide bond that links the beta-sheet core with the alpha-helix in wild-type LCI. Here, an analog of this intermediate was constructed by replacing Cys19 and Cys43 with alanine residues. Its oxidative folding follows a rapid sequential flow through one, two, and three disulfide species to reach the native form; the low accumulation of two disulfide intermediates and three disulfide (scrambled) isomers accounts for a highly efficient reaction. The three-dimensional structure of this analog, alone and in complex with carboxypeptidase A (CPA), was determined by X-ray crystallography at 2.2A resolution. Its overall structure is very similar to that of wild-type LCI, although the residues in the region adjacent to the mutation sites show an increased flexibility, which is strongly reduced upon binding to CPA. The structure of the complex also demonstrates that the analog and the wild-type LCI bind to the enzyme in the same manner, as expected by their inhibitory capabilities, which were similar for all enzymes tested. Equilibrium unfolding experiments showed that this mutant is destabilized by approximately 1.5 kcal mol(-1) (40%) relative to the wild-type protein. Together, the data indicate that the fourth disulfide bond provides LCI with both high stability and structural specificity.

Assay of disulfide oxidase and isomerase based on the model of hirudin folding

Oxidative folding of fully reduced hirudin (R-Hir, six cysteines) undergoes two distinct stages. A first stage of nonspecific disulfide formation promoted by oxidase converts R-Hir to form 3-disulfide scrambled hirudins (X-Hir) as obligatory intermediates. A second stage of disulfide shuffling catalyzed by isomerase converts X-Hir to the native hirudin (N-Hir). The model of hirudin folding is utilized here to develop an assay system for measuring the activity of disulfide oxidase and isomerase, using high-performance liquid chromatography (HPLC) quantification of R-Hir, X-Hir, and N-Hir. The oxidase assay measures the ability of an oxidase to promote R-HirX-Hir conversion. The molar specific activity is expressed as mol ofR-Hir decrease per mol of oxidase per min. The isomerase assay measures the ability of an isomerase to catalyze X-HirN-Hir transformation. The molar specific activity is expressed as mol ofN-Hir increase per mol of isomerase per min. Alternatively, the recovery of N-Hir in the isomerase assay can be determined by its alpha-thrombin inhibitory activity. Using both HPLC and activity-based assay, we have measured the relative oxidase and isomerase activity of reduced and oxidized glutathione, Cys, Cys-Cys, and reduced and oxidized protein disulfide isomerase (PDI). The molar specific activity of reduced PDI was shown to be 0.1+/-0.01 U, which is consistent with documented data obtained by the scrambled RNase-A-based assay. These proposed assay methods provide alternatives to the limited option of methodologies currently available for measuring oxidase and isomerase activities. A major merit of the proposed assay system is the potential to accommodate the analysis of biological samples.

Divergent folding pathways of two homologous proteins, BPTI and tick anticoagulant peptide: Compartmentalization of folding intermediates and identification of kinetic traps

Bovine pancreatic trypsin inhibitor (BPTI) and tick anticoagulant peptide (TAP) are two structurally homologous proteins, which have been shown to exhibit distinct mechanisms of oxidative folding. We demonstrate here differences of their folding properties using the technique of disulfide scrambling. Two extensively unfolded homologous isomers (beads-form) of BPTI (Cys5-Cys14, Cys30-Cys38, Cys51-Cys55) and TAP (Cys5-Cys15, Cys33-Cys39, Cys55-Cys59) were allowed to refold in parallel via disulfide shuffling of 13 potential isomers to form the native structure. Folding intermediates were trapped by acid quenching and analyzed by HPLC. The results reveal the following diversities: (a) there are two predominant folding intermediates of BPTI and seven well-populated folding intermediates of TAP. One of the two predominant BPTI intermediates (Cys5-Cys14, Cys30-Cys51, Cys38-Cys55) contains a native disulfide Cys30-Cys51 and constitutes about 34% of the total BPTI folding intermediates. In contrast, the TAP counterpart (Cys5-Cys15, Cys33-Cys55, Cys39-Cys59) represents only 5% of the total TAP intermediates; (b) three isomers of TAP sharing a stable non-native disulfide bond Cys15-Cys33 are shown to act as kinetic traps of TAP folding. Their counterparts are conspicuously absent in the BPTI folding; and (c) most significantly, folding intermediates of BPTI are found to be energetically compartmentalized, whereas most folding intermediates of TAP are inter-convertible and exist in dynamic equilibrium. Our studies further demonstrate optimal concentrations of denaturant required for destabilization of kinetic traps and acceleration of TAP folding.

In Vitro Refolding/Unfolding Pathways of Amphioxus Insulin-like Peptide

Amphioxus insulin-like peptide (AILP) belongs to the insulin superfamily and is proposed as the common ancestor of insulin and insulin-like growth factor 1. Herein, the studies on oxidative refolding and reductive unfolding of AILP are reported. During the refolding process, four major intermediates, P1, P2, P3, and P4, were captured, which were almost identical to those intermediates, U1, U2, U3, and U4, captured during the AILP unfolding process. P4 (U4) has the native disulfide A20-B19; P1 (U1), P2 (U2), and P3 (U3) have two disulfide bonds, which include A20-B19. Based on the analysis of the time course distribution and properties of the intermediates, we proposed that fully reduced AILP refolded through 1SS, 2SS, and 3SS intermediate stages to the native form; native AILP unfolded through 2SS and 1SS intermediate stages to the full reduced form. A schematic flow chart of major oxidative refolding and reductive unfolding pathways of AILP was proposed. Implication for the folding behavior of insulin family proteins was discussed. There may be seen three common folding features in the insulin superfamily: 1) A20-B19 disulfide is most important and formed during the initial stage of folding process; 2) the second disulfide is nonspecifically formed, which then rearranged to native disulfide; 3) in vitro refolding and unfolding pathways may share some common folding intermediates but flow in opposite directions. Furthermore, although swap AILP is a thermodynamically stable final product, a refolding study of swap AILP demonstrated that it is also a productive intermediate of native AILP during refolding.

Evidence for the underlying cause of diversity of the disulfide folding pathway

The pathways of oxidative folding of disulfide proteins exhibit a high degree of diversity, which is illustrated by the varied extent of (a) the heterogeneity of folding intermediates, (b) the predominance of intermediates containing native disulfide bonds, and (c) the level of accumulation of fully oxidized scrambled isomers as intermediates. BPTI and hirudin exemplify two extreme cases of such divergent folding pathways. We previously proposed that the underlying cause of this diversity is associated with the degree of stability of protein subdomains. Here we present compelling evidence that substantiates this hypothesis by studying the folding pathway of alphaLA-IIA. alphaLA-IIA is a partially folded intermediate of alpha-lactalbumin (alphaLA). It comprises a structured beta-sheet (calcium-binding) domain linked by two native disulfide bonds (Cys(61)-Cys(77) and Cys(73)-Cys(91)) and a disordered alpha-helical domain with four free cysteines (Cys(6), Cys(28), Cys(111), and Cys(120)). Purified alphaLA-IIA was allowed to refold without and with stabilization of its structured beta-sheet domain by calcium. In the absence of calcium, the folding pathway of alphaLA-IIA resembles that of hirudin, displaying a highly heterogeneous population of folding intermediates, including fully oxidized scrambled species. Upon stabilization of its beta-sheet domain by bound calcium, oxidative folding of alphaLA-IIA undergoes a pathway conspicuously similar to that of BPTI, exhibiting limited species of folding intermediates containing mostly native disulfide bonds.

Role of kinetic intermediates in the folding of leech carboxypeptidase inhibitor

The oxidative folding and reductive unfolding pathways of leech carboxypeptidase inhibitor (LCI; four disulfides) have been characterized in this work by structural and kinetic analysis of the acid-trapped folding intermediates. The oxidative folding of reduced and denatured LCI proceeds rapidly through a sequential flow of 1-, 2-, 3-, and 4-disulfide (scrambled) species to reach the native form. Folding intermediates of LCI comprise two predominant 3-disulfide species (designated as III-A and III-B) and a heterogeneous population of scrambled isomers that consecutively accumulate along the folding reaction. Our study reveals that forms III-A and III-B exclusively contain native disulfide bonds and correspond to stable and partially structured species that interconvert, reaching an equilibrium prior to the formation of the scrambled isomers. Given that these intermediates act as kinetic traps during the oxidative folding, their accumulation is prevented when they are destabilized, thus leading to a significant acceleration of the folding kinetics. III-A and III-B forms appear to have both native disulfides bonds and free thiols similarly protected from the solvent; major structural rearrangements through the formation of scrambled isomers are required to render native LCI. The reductive unfolding pathway of LCI undergoes an apparent all-or-none mechanism, although low amounts of intermediates III-A and III-B can be detected, suggesting differences in protection against reduction among the disulfide bonds. The characterization of III-A and III-B forms shows that the former intermediate structurally and functionally resembles native LCI, whereas the III-B form bears more resemblance to scrambled isomers.

Secondary Binding Site of the Potato Carboxypeptidase Inhibitor. Contribution to Its Structure, Folding, and Biological Properties

The contribution of each residue of the potato carboxypeptidase inhibitor (PCI) secondary binding site to the overall properties of this protein has been examined using alanine-scanning mutagenesis. Structural and enzymatic studies, performed on a series of PCI mutants, demonstrate that the proper positioning of the primary site for efficient binding and inhibition of carboxypeptidase A is significantly dependent on such a secondary contact region. The aromatic residues in this region play a key role in the stabilization of the PCI-enzyme complex, whereas polar residues contribute little to this task. A comparative study of the oxidative folding of these PCI mutants has been carried out using the disulfide quenching approach. The data, together with the structural characterization of some of these mutants, clearly indicate that noncovalent forces drive the refolding of this small disulfide-rich protein at the reshuffling stage, the rate-limiting step of the process. Moreover, it reveals that by introducing new noncovalent intramolecular contacts in PCI, we may create more stable variants, which also show improved folding efficiency. Taken together, the collected results clarify the folding determinants of the primary and secondary binding sites of PCI and their contribution to the inhibition of the carboxypeptidase, providing clues about PCI evolution and knowledge for its biotechnological redesign.

Elucidation of the disulfide-folding pathway of hirudin by a topology-based approach

A theoretical model for the folding of proteins containing disulfide bonds is introduced. The model exploits the knowledge of the native state to favor the progressive establishment of native interactions. At variance with traditional approaches based on native topology, not all native bonds are treated in the same way; in particular, a suitable energy term is introduced to account for the special strength of disulfide bonds, as well as their ability to undergo intramolecular reshuffling. The model thus possesses the minimal ingredients necessary to investigate the much debated issue of whether the refolding process occurs through partially structured intermediates with native or non-native disulfide bonds. This strategy is applied to a context of particular interest, the refolding process of hirudin, a thrombin-specific protease inhibitor, for which conflicting folding pathways have been proposed. We show that the only two parameters in the model (temperature and disulfide strength) can be tuned to reproduce well a set of experimental transitions between species with different number of formed disulfides. This model is then used to provide a characterization of the folding process and a detailed description of the species involved in the rate-limiting step of hirudin refolding.

Analysis of the effect of potato carboxypeptidase inhibitor pro-sequence on the folding of the mature protein

Protein folding can be modulated in vivo by many factors. While chaperones act as folding catalysts and show broad substrate specificity, some pro-peptides specifically facilitate the folding of the mature protein to which they are bound. Potato carboxypeptidase inhibitor (PCI), a 39-residue protein carboxypeptidase inhibitor, is synthesized in vivo as a precursor protein that includes a 27-residue N-terminal and a seven-residue C-terminal pro-regions. In this work the disulfide-coupled folding of mature PCI in vitro has been compared with that of the same protein extended with either the N-terminal pro-sequence (ProNtPCI) or both N- and C-terminal pro-sequences (ProPCI), and also with the N-terminal pro-sequence in trans (ProNt + PCI). No significant differences can be observed in the folding kinetics or efficiencies of all these molecules. In addition, in vivo folding studies in Escherichia coli have been performed using wild-type PCI and three PCI mutant forms with and without the N-terminal pro-sequence, the mutations had been previously reported to affect folding of the PCI mature form. The extent to which the 'native-like' form was secreted to the media by each construction was not affected by the presence of the N-terminal pro-sequence. These results indicate that PCI does not depend on the N-terminal pro-sequence for its folding in both, in vitro and in vivo in E. coli. However, structural analysis by spectroscopy, hydrogen exchange and limited proteolysis by mass spectrometry, indicate the capability of such N-terminal pro-sequence to fold within the precursor form.