Electron-capture mass spectrometry: recent advances

Electrochemical Aptasensors for Antibiotics Detection: Recent Achievements and Applications for Monitoring Food Safety

Antibiotics are often used in human and veterinary medicine for the treatment of bacterial diseases. However, extensive use of antibiotics in agriculture can result in the contamination of common food staples such as milk. Consumption of contaminated products can cause serious illness and a rise in antibiotic resistance. Conventional methods of antibiotics detection such are microbiological assays chromatographic and mass spectroscopy methods are sensitive; however, they require qualified personnel, expensive instruments, and sample pretreatment. Biosensor technology can overcome these drawbacks. This review is focused on the recent achievements in the electrochemical biosensors based on nucleic acid aptamers for antibiotic detection. A brief explanation of conventional methods of antibiotic detection is also provided. The methods of the aptamer selection are explained, together with the approach used for the improvement of aptamer affinity by post-SELEX modification and computer modeling. The substantial focus of this review is on the explanation of the principles of the electrochemical detection of antibiotics by aptasensors and on recent achievements in the development of electrochemical aptasensors. The current trends and problems in practical applications of aptasensors are also discussed.

Application of inert gas-mediated ionization for qualitative screening of chlorinated aromatics in house dust by comprehensive two-dimensional gas chromatography-high-resolution time-of-flight mass spectrometry

The development of highly selective and sensitive analytical methods for the nontarget screening of persistent organic pollutants such as halogenated compounds in environmental samples is a challenging task. Soft ionization mass spectrometry has emerged as a powerful technique for obtaining essential molecular information, and it is expected to reveal compounds that remain hidden with conventional fragmentation techniques such as electron ionization (EI). In this study, a soft ionization method based on electron capture negative ionization using an inert gas was developed for the nontarget screening of chlorinated aromatics in environmental samples and was applied to comprehensive two-dimensional gas chromatography-high-resolution time-of-flight mass spectrometry (GC × GC-HRToFMS). In particular, argon (Ar) and helium (He) were evaluated as inert moderating gases, and were compared against the conventional methane (CH₄). The optimal ionization conditions, including the flow rate and ion source temperature, were investigated based on the molecular ion intensities of highly chlorinated aromatics decachlorobiphenyl and octachlorodibenzofuran. Ar-mediated soft ionization provided the best sensitivity to molecular ions among the three gases at a low flow rate (0.1 mL min^-1) and low ion source temperature, and more selective detection of molecular ions (i.e., less fragmentation) was obtained with the inert gases than with CH₄. This method is also applicable to other chlorinated aromatics such as tetra- to nonachlorobiphenyls, tetra- to heptachlorinated dibenzofurans, pentachlorobenzene, and hexachlorobenzene. To demonstrate the applicability of the proposed method to a wide range of chlorinated aromatics in environmental samples, both Ar-mediated soft ionization and conventional EI were applied to GC × GC-HRToFMS for analysis of a crude extract of house dust. Soft ionization enabled the selective and sensitive detection of molecular ions for minor amounts of chlorinated aromatics, even in complex matrices. Furthermore, the extracted ion chromatograms of halide anions (Cl^- or Br^-) were useful for screening other chlorinated or brominated compounds in the environmental samples. The results suggest that combining information on halide anions obtained by soft ionization and the structural information provided by EI would constitute a powerful approach for the comprehensive identification of chlorinated aromatics.

Surface Acoustic Wave Nebulization with Atmospheric-Pressure Chemical Ionization for Enhanced Ion Signal

Many ambient desorption/ionization mass spectrometry (ADI-MS) techniques rely critically on thermal desorption. Meanwhile, the analyte classes that are successfully studied by any particular ADI-MS methods are strongly dependent on the type of ionization source. Generally, spray-based ionization sources favor polar analytes, whereas plasma-based sources can be used for more hydrophobic analytes and are more suitable for molecules with small molar masses. In the present work, classic atmospheric-pressure chemical ionization (APCI) is used. To provide improved desorption performance for APCI, a surface acoustic wave nebulization (SAWN) device was implemented to convert liquid analytes into fine airborne particles. Compared to conventional SAWN that is used solely as an ionization source for liquid samples, the coupling of SAWN and APCI significantly improves ion signal by up to 4 orders of magnitude, reaching comparable ion abundances to those of electrospray ionization (ESI). Additionally, this coupling also extends the applicable mass range of an APCI source, conventionally known for the ionization of small molecules <500 Da. Herein, we discuss cursory evidence of this applicability to a variety of analytes including both polar and nonpolar small molecules and novel peptides that mimic biomolecules upward of 1000 Da. Observed species are similar to ESI-derived ions including doubly charged analyte ions despite presumably different charging mechanisms. SAWN-APCI coupling may thus involve more nuanced ionization pathways in comparison to other ADI approaches.

The application of mass spectrometry in molecular dosimetry: ethylene oxide as an example

Mass spectrometry plays an increasingly important role in the search for and quantification of novel chemically specific biomarkers. The revolutionary advances in mass spectrometry instrumentation and technology empower scientists to specifically analyze DNA and protein adducts, considered as molecular dosimeters, derived from reactions of a carcinogen or its active metabolites with DNA or protein. Analysis of the adducted DNA bases and proteins can elucidate the chemically reactive species of carcinogens in humans and can serve as risk-associated biomarkers for early prediction of cancer risk. In this article, we review and compare the specificity, sensitivity, resolution, and ease-of-use of mass spectrometry methods developed to analyze ethylene oxide (EO)-induced DNA and protein adducts, particularly N7-(2-hydroxyethyl)guanine (N7-HEG) and N-(2-hydroxyethyl)valine (HEV), in human samples and in animal tissues. GC/ECNCI-MS analysis after HPLC cleanup is the most sensitive method for quantification of N7-HEG, but limited by the tedious sample preparation procedures. Excellent sensitivity and specificity in analysis of N7-HEG can be achieved by LC/MS/MS analysis if the mobile phase, the inlet (split or splitless), and the collision energy are properly optimized. GC/ECNCI-HRMS and GC/ECNCI-MS/MS analysis of HEV achieves the best performance as compared with GC/ECNCI-MS and GC/EI-MS. In conclusion, future improvements in high-throughput capabilities, detection sensitivity, and resolution of mass spectrometry will attract more scientists to identify and/or quantify novel molecular dosimeters or profiles of these biomarkers in toxicological and/or epidemiological studies.

Targeted chiral lipidomics analysis by liquid chromatography electron capture atmospheric pressure chemical ionization mass spectrometry (LC-ECAPCI/MS)

The corona discharge used to generate positive and negative ions under conventional atmospheric pressure chemical ionization (APCI) conditions also provides a source of low-energy gas-phase electrons. This is thought to occur by displacement of electrons from the nitrogen sheath gas. Therefore, suitable analytes can undergo electron capture in the gas phase in a manner similar to that observed for gas chromatography/electron capture negative chemical ionization/mass spectrometry (MS). This technique, which has been named electron-capture APCI (ECAPCI)/MS, mass spectrometry provides an increase in sensitivity of two orders of magnitude when compared with conventional APCI methodology. It is a simple procedure to tag arachidonic acid- and linoleic acid-derived oxidized lipids with an electron-capturing group such as the pentafluorobenzyl (PFB) moiety before analysis. PFB derivatives have previously been used as electron-capturing derivatives because they undergo dissociative electron capture in the gas phase to generate negative ions through the loss of a PFB radical. A similar process occurs under ECAPCI conditions. By monitoring the negative ions that are formed, it is possible to obtain extremely high sensitivity for PFB derivatives of oxidized lipids derived from arachidonic and linoleic acid. A combination of stable isotope dilution methodology and chiral liquid chromatography-ECAPCI/MS makes it possible to resolve and quantify complex mixtures of regioisomeric and enantiomeric oxidized lipids.

Electron capture atmospheric pressure photoionization mass spectrometry: analysis of fullerenes, perfluorinated compounds, and pentafluorobenzyl derivatives

An electron capture (EC) ionization mechanism has been found to be highly efficient in negative-ion atmospheric pressure photoionization (APPI) for the analysis of compounds with positive electron affinity (EA). Using negative-ion APPI, we first report the sensitive detection of natural electrophores with limited polarity, such as fullerenes and perfluorinated compounds, by mass spectrometry (MS). Using direct infusion on a quadrupole time-of-flight (QTOF) mass spectrometer, the limits of detection (LODs) for C(60) and perfluoromethylcyclohexane were determined to be 0.15 pg (0.2 fmol) and 1 femtoliter (fL) ( approximately 1.5 pg or 4.3 fmol), respectively. As the EA of the analyte increases, the detection sensitivity is enhanced. Making use of the accurate mass measurement capability of the QTOF mass spectrometer, we were able to investigate the elemental composition of the ions in each spectrum and attribute the observed high sensitivity to an EC-initiated ionization process. The proposed EC ionization mechanism is further supported by the observation of a dissociative EC reaction of pentafluorobenzyl (PFB)-derivatized phenols. The analysis of phenols by EC-APPI of their PFB derivatives resulted in very high sensitivity, with the lowest reported LOD of approximately 0.17 pg (0.5 fmol) being for 2,4-dinitrophenol. For future LC/EC-APPI-MS applications, the effect of additives and solvents on sensitivity was also tested and reported.

4-(4'-Methyltetrafluorophenyl)-2,3,5,6-tetrafluorobenzyl bromide: a new electrophoric derivatizing reagent

Commercially-available 4,4'-dimethyloctafluorobiphenyl was converted in a single step to 4-(4'-methyltetrafluorophenyl)-2,3,5,6-tetrafluorobenzyl bromide (MTFP-TFBBr) for the purpose of providing a new electrophoric derivatizing reagent. When reacted with this reagent, 2-fluoro-O6-(2'-hydroxyethyl)hypoxanthine, a model analyte, gave a mixture of isomeric products (apparently substituted at N7 and N9, analogous to its known reaction with pentafluorobenzyl bromide), and 53 femtograms of the mixture was detected at S/N = 10 by gas chromatography electron capture mass spectrometry (GC-EC-MS). As intended, the volatility of the MTFB-TFBBr derivative was much less (two-fold) than that of the corresponding pentafluorobenzyl derivative. It is anticipated that MTFB-TFBBr sometimes will be useful in providing an electrophoric derivative that encounters less background noise in analysis by electrophore derivatization/GC-EC-MS.

A GC–MS/MS method for the quantitative analysis of low levels of the tyrosine metabolites maleylacetone, succinylacetone, and the tyrosine metabolism inhibitor dichloroacetate in biological fluids and tissues

We developed a sensitive method to quantitate the tyrosine metabolites maleylacetone (MA) and succinylacetone (SA) and the tyrosine metabolism inhibitor dichloroacetate (DCA) in biological specimens. Accumulation of these metabolites may be responsible for the toxicity observed when exposed to DCA. Detection limits of previous methods are 200 ng/mL (1.2 pmol/microL) (MA) and 2.6 microg/mL (16.5 pmol/microL) (SA) but the metabolites are likely present in lower levels in biological specimens. To increase sensitivity, analytes were extracted from liver, urine, plasma and cultured nerve cells before and after dosing with DCA, derivatized to their pentafluorobenzyl esters, and analyzed via GC-MS/MS.

Targeted chiral lipidomics analysis

Genomics, transcriptomics, and proteomics are proving to be very useful techniques, which have impacted significantly on our understanding mechanisms of human disease. However, this systems biology approach has several drawbacks than can be overcome by the integration of metabonomics and lipidomics. We have developed a targeted lipidomics approach that makes it possible to directly analyze chiral lipids generated in cellular systems. Bioactive lipids are usually present in trace amounts as enanatiomers and regioisomers that require separation before they can be analyzed by mass spectrometry. Normal phase chiral chromatography is generally used to resolve bioactive lipid enanatiomers. However, conventional electrospray and atmospheric pressure chemical ionization/tandem mass spectrometry have limited sensitivity when normal phase solvents are used, which makes it difficult to conduct studies when only trace amounts of the bioactive lipids are present. The use of electron capture atmospheric pressure chemical ionization/tandem mass spectrometry overcomes this problem. Enantiomers and regioisomers of targeted bioactive lipids can be quantified using stable isotope dilution methodology coupled with normal phase chiral chromatography and electron capture atmospheric chemical ionization/tandem mass spectrometry. A targeted lipidomics profile from rat epithelial cells transfected with cyclooxygenase-2 and maintained in culture was obtained. Inhibition with the non-selective cyclooxygenase inhibitor aspirin increased the formation of 15(R)-hydroxyeicosatetraenoic acid in the cells although it completely inhibited formation of the 15(S)-enantiomer and prostaglandin E2. New mass spectrometry instrumentation with an improved atmospheric pressure chemical ionization source was found to be an order of magnitude more sensitive than existing instruments for analysis of bioactive lipids using electron capture methodology. This type of mass spectrometer will permit a more detailed analysis of cellular bioactive lipid production than has been possible previously. It will also permit in vivo targeted lipidomics studies to be conducted using biological fluids derived from animal models and human subjects.

Liquid chromatography-electrospray ionization-mass spectrometry: the future of DNA adduct detection

Over the past 40 years considerable emphasis has been placed on the development of accurate and sensitive methods for the detection and quantitation of DNA adducts. The formation of DNA adducts resulting from the covalent interaction of genotoxic carcinogens with DNA, derived from exogenous and endogenous sources, either directly or following metabolic activation, can if not repaired lead to mutations in critical genes such as those involved in the regulation of cellular growth and subsequent development of cancer. The major analytical challenge has been to detect levels of DNA adducts at the level of 0.1-1 adducts per 10(8) unmodified DNA bases using only low microgram amounts of DNA, and with high specificity and accuracy, in humans exposed to genotoxic carcinogens derived from occupational, environmental, dietary and life-style sources. In this review we will highlight the merits as well as discuss the progress made by liquid chromatography coupled to electrospray ionization mass spectrometry as a method for DNA adduct detection.

New insights regarding the autoxidation of polyunsaturated fatty acids

Free radical-initiated autoxidation of polyunsaturated fatty acids (PUFAs) has been implicated in numerous human diseases, including atherosclerosis and cancer. This review covers the free radical mechanisms of lipid oxidation and recent developments of analytical techniques to analyze the lipid oxidation products. Autoxidation of PUFAs generates hydroperoxides as primary oxidation products, and further oxidation leads to cyclic peroxides as secondary oxidation products. Characterization of these oxidation products is accomplished by several mass spectrometric techniques. Ag+ coordination ion spray mass spectrometry has proven to be a powerful tool to analyze the intact lipid peroxides. Monocyclic peroxides, bicyclic endoperoxides, serial cyclic peroxides, and a novel class of endoperoxides (dioxolane-isoprostane peroxides) have been identified from the oxidation of arachidonate. Electron capture atmospheric pressure chemical ionization mass spectrometry has been applied to study lipid oxidation products after derivatization. All eight possible diastereomeric isoprostanes are observed from the oxidation of a single hydroperoxide precursor. 5- and 15-series isoprostanes are more abundant than the 8- and 12-series because the precursors that lead to 8- and 12-series compounds can undergo further oxidation and form dioxolane-isoprostane peroxides. Furthermore, formation of isoprostanes from 15-hydroperoxyeicosatetraenoate occurs from beta-fragmentation of the corresponding peroxyl radical to generate a pentadienyl radical rather than a "dioxetane" intermediate, as previously suggested.

Analysis of 7-methylguanine using isotope dilution and gas chromatography/electron-capture negative chemical ionization mass spectrometry

This paper presents results obtained for in vivo endogenous and exogenous 7-methylguanine (7-MG) analyzed using a method incorporating gas chromatography with electron-capture negative chemical ionization mass spectrometry and isotope dilution (GC/EC-ID-MS). 13C4-Labeled 7-MG was synthesized to serve as an internal standard to improve accuracy of quantitation, and was used to analyze 7-MG in livers of control mice and dacarbazine-treated mice. The results confirm that 7-MG in tissue DNA can be measured using this GC/EC-ID-MS method with excellent sensitivity and specificity. Administration of 0, 30, and 60 mg/kg dacarbazine to mice led to dose-dependent increases in the formation of 7-MG. The results indicate that this method could be applied to the analysis of endogenous and exogenous 7-MG in human tissues for future molecular epidemiology studies on potential health effects caused by methylating agents.

Strategies for the liquid chromatographic-mass spectrometric analysis of non-polar compounds

Electrospray ionization and atmospheric pressure chemical ionization (APCI) have evolved recently as very useful tools for the liquid chromatographic-mass spectrometric (LC-MS) analysis of polar substances. Non-polar compounds, however, are difficult to analyze with these atmospheric pressure ionization techniques due to their soft ionization mechanism. Recently, new approaches have been introduced which are likely to overcome this obstacle, at least partly. On-line electrochemical conversion of the analytes to more polar reaction products, atmospheric pressure photoionization, atmospheric pressure electron capture negativeion-MS and coordination ionspray-MS are four techniques which are presented in detail compared and discussed critically with respect to their current status and future perspectives. Particular focus is directed from a chemical viewpoint on the substance groups which are accessible by each of the new approaches.

Measurement of endogenous estrogens: analytical challenges and recent advances

Recent developments in the analysis of endogenous estrogens (including both free and conjugated estrogens) are reviewed. Largely due to urging by some cancer researchers, new demands are now being placed on such measurements in terms of sensitivity, throughput, multi-analyte detection and accuracy. Especially high sensitivity is required for detecting estrogens in serum from postmenopausal women, children and men, where concentrations at the low pg/ml level are encountered, and one would prefer to test much less than 1 ml of serum. Aside from throughput, meeting all of these demands may be beyond the reach of immunoassay, the method that has created and continues to dominate this field. Both HPLC and GC versions of mass spectrometry are emerging that have some potential to improve the testing of physiological samples for endogenous estrogens. The following topics are covered in this review: related analyses (e.g. detection of estrogens in environmental samples such as water, where 1-1 samples can be collected to provide ng amounts of estrogens); structure and metabolism of estrogens; biological actions (with an emphasis on their role in cancer); immunoassays; HPLC with electrochemical detection; GC-ECD; and various forms of mass spectrometry.

Rapid multi-residue method for the determination of azinphos methyl, bromopropylate, chlorpyrifos, dimethoate, parathion methyl and phosalone in apricots and peaches by using negative chemical ionization ion trap technology

A rapid, selective and sensitive multi-residue method for the determination of six common pesticides in stone fruit samples is described. The proposed method involves the extraction of the pesticides with the use of acetone solvent followed by liquid-liquid partition with a mixture of dichloromethane and light petroleum (40-60 degrees C) and subsequent determination by a gas chromatographic-mass spectrometry system using ion trap technology in negative ion chemical ionization mode. The average percent recoveries of bromopropylate and phosalone in the concentration range 0.2-2.0 mg/kg were 97.3 +/- 6.7 to 120 +/- 1.0%, while the recoveries of chlorpyrifos and parathion methyl examined in the concentration range 0.02-0.2 mg/kg were 95.5 +/- 7.5 to 145 +/- 3.6%, the recoveries of azinphos methyl in the range 0.05-0.5 mg/kg were 74.8 +/- 29.6 to 96.5 +/- 13% and those of dimethoate in the range 0.1-1.0 mg/kg were 73.1 +/- 5.7 to 92.8 +/- 2.8% for n = 3 for all the above pesticides. The high mean recovery (145%) for chlorpyrifos is attributed to a matrix enhancement effect. The limits of quantitation in apricots were 0.01 mg/kg for chlorpyrifos, 0.02 mg/kg for dimethoate and parathion methyl, 0.05 mg/kg for azinphos methyl and phosalone and 0.1 mg/kg for bromopropylate. The usefulness of tandem mass spectrometry for confirmation purposes was also examined. The method was applied successfully to the determination of the target pesticides in 32 samples of stone fruits (apricots and peaches).

Targeted lipidomics using electron capture atmospheric pressure chemical ionization mass spectrometry

There is an increasing need to be able to conduct quantitative lipidomics analyses as a complement to proteomics studies. The highest specificity for proteomics analysis can be obtained using methodology based on electrospray ionization (ESI) or atmospheric pressure chemical ionization (APCI) coupled with liquid chromatography/tandem mass spectrometry (LC/MS/MS). For lipidomics analysis it is often necessary to be able to separate enantiomers and regioisomers. This can be very challenging when using methodology based on conventional reversed-phase chromatography. Normal-phase chromatography using chiral columns can provide dramatic improvements in the resolution of enantiomers and regioisomers. However, conventional ESI- and APCI-MS/MS has limited sensitivity, which makes it difficult to conduct studies in cell culture systems where only trace amounts of non-esterified bioactive lipids are present. The use of electron capture APCI-MS/MS overcomes this problem. Enantiomers and regioisomers of diverse bioactive lipids can be quantified using stable isotope dilution methodology coupled with normal-phase chiral chromatography and electron capture APCI-MS/MS. This methodology has allowed a lipidomics profile from rat epithelial cells maintained in culture to be delineated and allowed the effect of a non-selective lipoxygenase inhibitor to be assessed.

An overview of some recent developments in ionization methods for mass spectrometry

An overview of some recent advances in ionization sources for mass spectrometry is presented. Limitations were set so that the overview covers ionization techniques relevant to organic and biological analysis that have appeared in the literature since the year 2000. No effort is made to be comprehensive. Rather, a broad sweep overview of author-subjective highlights among a wide variety of sources is presented. These ionization sources include electron ionization, chemical ionization, various atmospheric plasma ionization sources, laser desorption sources, sonic spray and electrospray ionization sources.

LC-electron capture-APCI(−)-MS determination of nitrobenzoxadiazole derivatives

Nitrobenzoxadiazole (NBD) derivatives are determined with limits of detection ranging down to 20 nmol l(-1) using liquid chromatography-mass spectrometry (LC-MS) with electron capture (EC) ionisation. An atmospheric pressure chemical ionisation (APCI) interface operated in the negative ion mode is used as ionisation source. Amine derivatives of 4-chloro-7-nitro-2,1,3-benzoxadiazole (NBDCl) as well as the isocyanate derivatives of 4-nitro-7-piperazino-2,1,3-nitrobenzoxadiazole (NBDPZ) have been analysed using this technique. The parameters favouring electron capture mechanisms have been investigated thoroughly under consideration of the competing mechanism of deprotonation to allow a better understanding of the electron capture process and to improve selectivity of the analysis.

Applications of mass spectrometry for quantitation of DNA adducts

DNA adducts are formed when electrophilic molecules or free radicals attack DNA. 32P-postlabeling has been the most commonly used assay for quantitation of DNA adducts due mainly to its excellent sensitivity that allows quantitation at concentrations as low as approximately 1 adduct per 10(9) normal bases. Such methods, however, do not have the specificity desired for accurate and reliable quantitation, and are prone to produce false positives and artifacts. In the last decade, mass spectrometry in combination with liquid and gas chromatography has presented itself as a good alternative to these techniques since it can satisfy the need for specificity and reliability through the use of stable isotope-labeled internal standards and highly specific detection modes such as selected reaction monitoring and high-resolution mass spectrometry. In this article, the contribution of mass spectrometry to the quantitation of DNA adducts is reviewed with special emphasis on unique applications of mass spectrometry in the area of DNA adduct quantitation and recent applications with improvements in sensitivity.

Synthesis of releasable electrophore tags for applications in mass spectrometry

Releasable electrophore mass tags (electrophore tags) are compounds for use as labels in ligand assays such as hybridization assays and immunoassays. In such assays, the electrophore-tagged reagent (e.g., DNA probe or antibody) is quantified at the conclusion of the assay by cleaving a bond in the attached tag so that the electrophore part can be brought into the gas phase (usually thermally) for detection by electron capture mass spectrometry (EC-MS) or a related technique. Interest in these tags is promoted mainly by their potential to provide highly sensitive and multiplexed assays. The high multiplexing arises from the opportunity to measure many such tags simultaneously in the mass spectrometer, where each tag has an electrophore part with a unique mass. In this study five precursors of electrophore mass tags are presented. Each precursor can lead to a large library of electrophore tags in a practical way, since each precursor can be converted to many different electrophore tags by reaction with commonly available phenols that provide a variation in mass. The phenol-reactive part of the tag is either a polyfluorobiphenyl or a benzyl chloride moiety. Representative library compounds are prepared and detected in an inert ester form by gas chromatography electron capture mass spectrometry (GC-EC-MS). Further, one tag is conjugated to DNA, and the resulting product is detected by laser-induced electron capture time-of-flight mass spectrometry on a silver surface. A calculation by the semiempirical method AM1 for an ion formed by one of the electrophores suggests that ring rotation promotes dissociative electron capture. The features of practical synthesis, simple composition, physicochemical stability, high multiplicity, high sensitivity, and potential for high throughput detection make releasable electrophore mass tags attractive for highly multiplexed assays. This includes their use in SNP assays or dideoxy DNA sequencing for detection of mutations in individuals, where the combination of high accuracy and speed is essential.

Bypass high-performance liquid chromatography for purification of trace analytes

technique that we have termed "bypass HPLC" is introduced as a noncontaminating way to define the retention time of a trace analyte for purification purposes on an HPLC column when the amount of the analyte in real samples is too low for on-line detection. The technique employs two HPLC columns ("calibration" and "purification") of the same type that are connected in parallel, with appropriate valving, along with use of two accessory compounds. By injecting ordinary (on-line detectable) amounts of authentic analyte plus the two accessory compounds on the calibration column, and similarly the two accessory compounds onto the purification column, one can predict the retention of the analyte on the latter column without contaminating this column, as follows. The migration times of the first accessory compound provide a reference time on each column; the migration times of the second accessory compound are normalized on each column by subtracting the corresponding reference times; and then the retention time of analyte can be calculated on the second column since the ratio of its normalized retention times on the two columns equals the corresponding ratio for the second accessory compound.