Chiral analysis by capillary electrophoresis using antibiotics as chiral selector

Versatile capillary electrophoresis method for the direct chiral separation of aliphatic and aromatic α-hydroxy acids, β-hydroxy acids and polyhydroxy acids using vancomycin as chiral selector

Hydroxy acids (HAs) are ubiquitous in nature and play significant roles in various industrial and biological processes. Most HAs harbor at least one chiral center, therefore the development of efficient chiral analysis techniques for HA stereoisomers is of crucial importance across a wide range of fields. A capillary electrophoresis (CE) method was developed for the chiral analysis and quantification of aliphatic and aromatic α‑hydroxy acid (AHA) enantiomers, aliphatic β‑hydroxy acid (BHA) enantiomers and aliphatic polyhydroxy acid (PHA) stereoisomers. Using a modified partial filling-counter current method with indirect UV detection, high resolution (Rs) was achieved with vancomycin as a chiral selector added to the background electrolyte composed of 10 mM of benzoic acid/L-histidine at pH 5 using a polyacrylamide-coated capillary. This method could be readily applied to the determination of the enantiomers of 12 aliphatic AHAs, 4 aromatic AHAs, 3 aliphatic BHAs, as well as to the determination of the stereoisomers of tartaric acid, 2,3-dihydroxybutanoic acid, 2,3,4,5-tetrahydroxypentanoic acid, and 2,3,4,5,6-pentahydroxyhexanoic acid without the need for sample derivatization. Finally, our study provides a robust and versatile strategy for the chiral and stereoselective analysis of a broad range of hydroxy acid compounds.

Recognition in the Domain of Molecular Chirality: From Noncovalent Interactions to Separation of Enantiomers

It is not a coincidence that both chirality and noncovalent interactions are ubiquitous in nature and synthetic molecular systems. Noncovalent interactivity between chiral molecules underlies enantioselective recognition as a fundamental phenomenon regulating life and human activities. Thus, noncovalent interactions represent the narrative thread of a fascinating story which goes across several disciplines of medical, chemical, physical, biological, and other natural sciences. This review has been conceived with the awareness that a modern attitude toward molecular chirality and its consequences needs to be founded on multidisciplinary approaches to disclose the molecular basis of essential enantioselective phenomena in the domain of chemical, physical, and life sciences. With the primary aim of discussing this topic in an integrated way, a comprehensive pool of rational and systematic multidisciplinary information is provided, which concerns the fundamentals of chirality, a description of noncovalent interactions, and their implications in enantioselective processes occurring in different contexts. A specific focus is devoted to enantioselection in chromatography and electromigration techniques because of their unique feature as "multistep" processes. A second motivation for writing this review is to make a clear statement about the state of the art, the tools we have at our disposal, and what is still missing to fully understand the mechanisms underlying enantioselective recognition.

The Use of Antibiotics as Chiral Selectors in Capillary Electrophoresis: A Review

Chirality is becoming an essential issue in modern pharmaceutical research as regulatory agencies emphasize the safety and efficiency of enantiomers in drug development. The development of efficient and reliable chiral separation methods became a necessity in the last 30 years, and capillary electrophoresis (CE), due to its relatively low costs and “green” features, is attracting increased attention. Cyclodextrin (CD) and their derivatives are the most frequently used chiral selectors (CSs) in CE, however, the use of antibiotics as CSs represents an interesting alternative. Various classes of antibiotics (aminoglycosides, ansamycins, glycopeptides, lincosamides, macrolides, tetracyclines) have been used more or less successfully for the enantio-separation of pharmaceuticals. Antibiotics offer the possibility of a multitude of potential interactions (electrostatic, inclusion, hydrogen bonding, etc.) due to their chemical diversity, allowing the enantio-separation of analytes with a wide range of structural characteristics. This article aims to review the application of various classes of antibiotics in the CE enantio-separation of pharmaceuticals. Antibiotic physiochemical characteristics, variables impacting enantio-separation, advantages, and disadvantages when certain antibiotics are used as CSs in CE are also explored.

'Ab Ovo' Chiral Phases and Chiral Reagents for Liquid Chromatographic Separation and Isolation of Enantiomers

The de-novo approach of mixing chirally pure reagents or Cu(II)-L-amino acid complexes in the slurry of silica gel for preparing TLC plates was reported from author's laboratory and was successful for separation and isolation of enantiomers. Using high molar absorptivity molecules, e. g., 1,5-difluoro-2,4-dinitrobenzene and cyanuric chloride, more than 38 new chiral derivatizing reagents were synthesized in our laboratory by straightforward nucleophilic substitution with simple chiral auxiliaries. Besides, (S)-naproxen, (S)-ketoprofen, and (S)-levofloxacin were used as chiral platforms. A conceptual approach using both achiral phases in chromatography for enantioseparation was also adopted. ¹ H NMR and DFT based software were used to explain structures of non-covalent and covalent diastereomeric pairs and determination of configuration and separation mechanism. The methods can be easily used to determine and control enantiomeric purity with advantages over a variety of commercial chiral phases.

Dual 2-Hydroxypropyl-β-Cyclodextrin and 5,10,15,20-Tetrakis (4-Hydroxyphenyl) Porphyrin System as a Novel Chiral-Achiral Selector Complex for Enantioseparation of Aminoalkanol Derivatives with Anticancer Activity in Capillary Electrophoresis

In this study, a complex consisting of 2-hydroxypropyl-β-cyclodextrin and 5,10,15,20-tetrakis (4-hydroxyphenyl) porphyrin, (named dual chiral-achiral selector complex) was used for the determination of two novel potential anticancer agents of (I) and (II) aminoalkanol derivatives. This work aimed at developing an effective method that can be utilized for the determination of I (S), I (R), and II (S) and II (R) enantiomers of (I) and (II) compounds through the use of a dual chiral-achiral selector complex consisting of hydroxypropyl-β-cyclodextrin and 5,10,15,20-tetrakis (4-hydroxyphenyl) porphyrin system by applying capillary electrophoresis. This combination proved to be beneficial in achieving high separation selectivity due to the combined effects of different modes of chiral discrimination. The enantiomers of (I) and (II) compounds were separated within a very short time of 3.6–7.2 min, in pH 2.5 phosphate buffer containing 2-hydroxypropyl-β-cyclodextrin and 5,10,15,20-tetrakis (4-hydroxyphenyl) porphyrin system at a concentration of 5 and 10 mM, respectively, at 25 °C and +10 kV. The detection wavelength of the detector was set at 200 nm. The LOD for I (S), I (R), II (S), and II (R) was 65.2, 65.6, 65.1, and 65.7 ng/mL, respectively. LOQ for I (S), I (R), II (S), and II (R) was 216.5, 217.8, 217.1, and 218.1 ng/mL, respectively. Recovery was 94.9–99.9%. The repeatability and reproducibility of the method based on the values of the migration time, and the area under the peak was 0.3–2.9% RSD. The stability of the method was determined at 0.1–4.9% RSD. The developed method was used in the pilot studies for determining the enantiomers I (S), I (R), II (S), and II (R) in the blood serum.

Past, present, and future developments in enantioselective analysis using capillary electromigration techniques

Enantioseparation of chiral products has become increasingly important in a large diversity of academic and industrial applications. The separation of chiral compounds is inherently challenging and thus requires a suitable analytical technique that can achieve high resolution and sensitivity. In this context, CE has shown remarkable results so far. Chiral CE offers an orthogonal enantioselectivity and is typically considered less costly than chromatographic techniques, since only minute amounts of chiral selectors are needed. Several CE approaches have been developed for chiral analysis, including chiral EKC and chiral CEC. Enantioseparations by EKC benefit from the wide variety of possible pseudostationary phases that can be employed. Chiral CEC, on the other hand, combines chromatographic separation principles with the bulk fluid movement of CE, benefitting from reduced band broadening as compared to pressure-driven systems. Although UV detection is conventionally used for these approaches, MS can also be considered. CE-MS represents a promising alternative due to the increased sensitivity and selectivity, enabling the chiral analysis of complex samples. The potential contamination of the MS ion source in EKC-MS can be overcome using partial-filling and counter-migration techniques. However, chiral analysis using monolithic and open-tubular CEC-MS awaits additional method validation and a dedicated commercial interface. Further efforts in chiral CE are expected toward the improvement of existing techniques, the development of novel pseudostationary phases, and establishing the use of chiral ionic liquids, molecular imprinted polymers, and metal-organic frameworks. These developments will certainly foster the adoption of CE(-MS) as a well-established technique in routine chiral analysis.

Application of Sub-2 Micron Particle Silica Hydride Derivatized with Vancomycin for Chiral Separations by Nano-Liquid Chromatography

1.8 μm Silica hydride particles have been derivatized with vancomycin and applied to the enantioseparation of some racemic herbicides and nonsteroidal anti-inflammatory drugs (NSAIDs) by nano-liquid chromatography. The chiral stationary phase (CSP) was packed for only 11 cm and the enantiomers were separated utilizing a laboratory-assembled instrumentation. The new CSP was very effective for the separation of the above mentioned acidic compounds, while poor resolutions were obtained for basic compounds. Mixtures of acetate buffer with methanol or acetonitrile allowed the chiral resolution of all compounds. Fast chiral separation of a NSAIDs-related compound can be achieved in less than 60 s.

Enantiomeric separation of adrenaline, noradrenaline, and isoprenaline by capillary electrophoresis using streptomycin-modified gold nanoparticles

Enantiomeric separations of the adrenergic compounds adrenaline, noradrenaline, and isoprenaline were studied. Electromigrative separations were performed in uncoated fused silica capillaries using streptomycin-modified gold nanoparticles (ST-AuNPs) as an additive to the background electrolyte. The ST-AuNPs are shown to serve as an effective chiral selector. The modified AuNPs were characterized in terms of size and zeta potential, and by IR and UV-vis spectra. The effects of ST-AuNP concentration, pH value, temperature, and separation voltage on the separations were systematically studied. Under optimized experimental conditions, racemic mixtures of the respective adrenergic drugs were baseline-separated within 7 min with a resolution of up to 7.5. The relative standard deviations of the resolution in inter-day and intra-day studies (n = 5) were generally <5%. Graphical abstract Schematic of the method for enantiomeric separations. (A): At low concentrations of streptavidinylated gold nanoparticles (ST-AuNPs), the better matching enantiomer is preferably "transported" by the ST-AuNPs; (B) ST-AuNP concentration increased to an optimal value; (C): The ST-AuNP concentration is too high; even poorly matching enantiomers will be transported simultaneously.

Investigation of maltodextrin-based synergistic system with amino acid chiral ionic liquid as additive for enantioseparation in capillary electrophoresis

The combined use of chiral ionic liquids (ILs) and chiral selectors in capillary electrophoresis (CE) to establish a synergistic system has proven to be an effective approach for enantioseparation. In this article, tetramethylammonium-L-arginine, a kind of amino acid chiral IL, was applied to investigate its potential synergistic effect with maltodextrin in CE enantioseparation. The established maltodextrin-based synergistic system showed markedly improved enantioseparations compared with the single maltodextrin system. Parameters such as the chiral IL concentration, maltodextrin concentration, buffer pH, applied voltage, and capillary temperature were optimized. Satisfactory enantioseparation of the five studied drugs, including nefopam, duloxetine, ketoconazole, cetirizine, and citalopram was achieved in 50 mM Tris-H₃ PO₄ buffer solution (pH 3.0) containing 7.0% (m/v) maltodextrin and 60 mM tetramethylammonium-L-arginine. In addition, the chiral configuration of tetramethylammonium-L-arginine was also investigated to demonstrate the existence of a synergistic effect between chiral ILs and maltodextrin.

Carbamoylated azithromycin incorporated zirconia hybrid monolith for enantioseparation of acidic chiral drugs using non-aqueous capillary electrochromatography

Carbamoylated derivatives of two antibiotics, namely, clindamycin phosphate (CLIP) and erythromycin (ERY) were successfully employed as co-precursors, in combination of zirconium tetrabutoxide as a precursor, to prepare chiral organic-zirconia hybrid monoliths (i.e., CLIP-ZHMs and ERY-ZHMs, respectively) via a single-step in-situ sol-gel approach in our previous works. Their superiority over chiral organic-zirconia/silica monoliths, prepared by post-modification approach, in terms of better enantioresolution and enhanced stability inspired us to prepare ZHMs based on an another antibiotic, azithromycin (i.e., AZI-ZHMs). Monolithic columns were employed for capillary electrochromatographic enantioseparation of acidic chiral drugs in mobile phases consisting of acetonitrile (ACN) and methanol (MeOH) as organic modifiers, and acetic acid (AcOH) and triethylamine (TEA) as electrolytes. The effects of composition of mobile phase and applied voltage on chiral separation were investigated by using ketoprofen as a representative analyte. Baseline resolutions were obtained for six acidic drugs in mobile phase consisting of 80/20 (v/v) ACN/MeOH with 300mM AcOH and 10mM TEA at a 10kV applied voltage and 25°C capillary temperature. The relative standard deviations for resolution values regarding column to column and batch to batch repeatability were less than 2.5% (for n=3) under optimized conditions, indicating satisfactory stability of the columns and reproducibility of the column preparation process.

Application of rifampicin as a chiral selector for enantioresolution of basic drugs using capillary electrophoresis

Rifampicin, a member of rifamycin sub-class of antibiotics which belongs to the naphthalenic ansamycin class of antibiotics, has a characteristic ansa structure, i.e., a ring structure or chromophore spanned by an aliphatic chain. The present work was designed to evaluate its potential as a chiral selector (CS) as its structure consisting of nine stereogenic centers, an aromatic moiety and several functional groups (i.e., one imine, one amide, one acetoxy residue, two aliphatic hydroxyl and three phenolic hydroxyl groups) was expected to instigate multiple enantioselective interactions, namely, hydrogen bonding and inclusion complexation with chiral analytes, and therefore resulting in efficient enantioseparations. Systematic experiments were performed to investigate the effects of concentration of CS, composition of background electrolyte (BGE) and applied voltage on chiral separation. Enantiomers of propranolol and metoprolol were baseline resolved using a BGE consisting of 20mM CS and 50/50 (v/v) iso-propanol/phosphate buffer (100mM, pH 7.0) whereas for enantiomers of sertraline, a BGE consisting of 23mM CS and 40/60 (v/v) iso-propanol/phosphate buffer (100mM, pH 7.0) resulted in baseline resolutions.

Synthesis and applications of sulfopropyl ether γ-cyclodextrin polymer as chiral selector in capillary electrophoresis

A novel sulfopropyl ether γ-cyclodextrin polymer (SPE-γ-CDP) through polycondensating sulfated cyclodextrins (SCDs) was synthesized. This synthesis approach also has the potential of preparing other derived cyclodextrins (CDs) polymers. The polymerized SCDs took on both the properties of SCDs and certain characteristics of polymers, such as chiral selectivity and high viscosity. Synthesis parameters, including reactions sequence, sulfation, and polycondensation conditions were investigated systematically. The product was characterized by elemental analysis, infrared spectroscopy (IR), and indirect UV detections prior to use as background electrolytes additive. The separation conditions, including the concentration of SPE-γ-CDP, the concentration and pH of running buffer, separation voltage, as well as the additional organic solution were optimized during chiral separation of neutral, acidic, and basic enantiomers in capillary electrophoresis (CE). SPE-γ-CDP was proven to be an effective chiral resolving agent in CE with the advantages of simple synthesis process, low cost, similar ratio of charge-to-mass, low current, great reproducibility, and reusability. Graphical Abstract Synthesis and applications of sulfopropyl ether γ-cyclodextrin polymer.

Single-step approach for fabrication of vancomycin-bonded silica monolith as chiral stationary phase

A vancomycin-bonded silica monolithic column for capillary electrochromatography (CEC) was prepared by a single-step in situ sol-gel approach. This sol-gel process incorporates a synthetic sol-gel precursor which contains a macrocyclic antibiotic, vancomycin, to form a porous silica network inside a fused-silica capillary. To avoid degradation of vancomycin during the column fabrication, a mild step was adopted into the sol-gel process. The performance of the vancomycin chiral stationary phase was investigated by CEC in both the reversed-phase mode and the normal-phase mode. The vancomycin chiral stationary phase was optimized with respect to vancomycin loading in the reversed-phase mode for chiral separation of thalidomide enantiomers. The best efficiency and resolution values of 94600plates/m and 5.79, respectively, were achieved. The optimized column was further applied to chiral separation of alprenolol enantiomers. A plate height of less than 7μm for the first eluted enantiomer of alprenolol was obtained in an aqueous mobile phase at a flow rate of 0.74mm/s. Using enantiomers of seven β-blockers and some other basic enantiomers as test analytes, separation efficiencies of up to 148100plates/m in the reversed-phase mode and up to 138100plates/m in the normal-phase mode were achieved.

Potential of vancomycin for the enantiomeric resolution of FMOC-amino acids by capillary electrophoresis-ion-trap-mass spectrometry

The potential of the antibiotic vancomycin (VC) as chiral selector for the enantiomeric separation of amino acids by CE-ESI-MS/MS² was investigated for the first time in this work. Derivatization of amino acids with FMOC-Cl was carried out to enable their interaction with VC as well as the formation of precursor ions with larger m/z which were employed in MS² experiments. The partial filling of a coated capillary was employed to avoid the loss in MS sensitivity originated by the introduction of VC in the ionization source. Under optimized conditions, the simultaneous enantiomeric separation and unequivocal identification of 17 amino acids (two of them being nonprotein amino acids) took place in about 20 min with LODs in the micromolar range.

Penicillin G as a novel chiral selector in capillary electrophoresis

The penicillin sub-class of β-lactam antibiotics has not been examined for its enantiodiscriminating abilities in capillary electrophoresis (CE) until date. The present work was therefore designed to evaluate penicillin G potassium salt (PenG) as an ion-pair chiral selector (CS) using CE for its several attributes, namely, high solubility in water and lower alcohols, structure allowing multiple interactions with analytes and cost-effectiveness. Systematic experiments were performed to investigate the effect of composition of background electrolyte, applied voltage and capillary temperature on chiral separation. Baseline resolutions of enantiomers of five basic chiral drugs (namely, darifenacin, citalopram, sertraline, propranolol and metoprolol) were attained using a background electrolyte composed of water:methanol (90:10, v/v) and consisting of 10.7 or 16.1mM CS at 20°C using an applied voltage of 5kV.

Application of antibiotics as chiral selectors for capillary electrophoretic enantioseparation of pharmaceuticals: a review

Recent years have witnessed several new trends in chiral separation, for example, the enantiorecognition ability of several new antibiotics has been explored using capillary electrophoresis (CE) prior to HPLC; antibiotics have been employed as chiral selectors (CSs) in a nonaqueous CE (NACE) mode; and several new detection techniques (namely, capacitively coupled contactless conductivity detection) have been used in combination with CE for quantification of enantiomers. On account of these emerging trends, this article aims to review the application of various classes of antibiotics for CE enantioseparation of pharmaceuticals. A detailed account of the basic factors affecting enantioseparation, certain limitations of antibiotics as CSs and strategies to mitigate them, and advantages of NACE while using antibiotics as CSs has also been presented.

Chiral recognition in separation science: an overview

Chiral recognition phenomena play an important role in nature as well as analytical separation sciences. In separation sciences such as chromatography and capillary electrophoresis, enantiospecific interactions between the enantiomers of an analyte and the chiral selector are required in order to observe enantioseparations. Due to the large structural variety of chiral selectors applied, different mechanisms and structural features contribute to the chiral recognition process. This chapter briefly illustrates the current models of the enantiospecific recognition on the structural basics of various chiral selectors.

Differentiation of enantiomers by capillary electrophoresis

Capillary electrophoresis (CE) has matured to one of the major liquid phase enantiodifferentiation techniques since the first report in 1985. This can be primarily attributed to the flexibility as well as the various modes available including electrokinetic chromatography (EKC), micellar electrokinetic chromatography (MEKC), and microemulsion electrokinetic chromatography (MEEKC). In contrast to chromatographic techniques, the chiral selector is mobile in the background electrolyte. Furthermore, a large variety of chiral selectors are available that can be easily combined in the same separation system. In addition, the migration order of the enantiomers can be adjusted by a number of approaches. In CE enantiodifferentiations the separation principle is comparable to chromatography while the principle of the movement of the analytes in the capillary is based on electrophoretic phenomena. The present chapter will focus on mechanistic aspects of CE enantioseparations including enantiomer migration order and the current understanding of selector-selectand structures. Selected examples of the basic enantioseparation modes EKC, MEKC, and MEEKC will be discussed.

Advances in the enantioseparation of β-blocker drugs by capillary electromigration techniques

β-Blocker drugs or β-adrenergic blocking agents are an important class of drugs, prescribed with great frequency. They are used for various diseases, particularly for the treatment of cardiac arrhythmias, cardioprotection after myocardial infarction (heart attack), and hypertension. Almost all β-blocker drugs possess one or more stereogenic centers; however; only some of them are administered as single enantiomers. Since both enantiomers can differ in their pharmacological and toxicological properties, enantioselective analytical methods are required not only for pharmacodynamic and pharmacokinetic studies but also for quality control of pharmaceutical preparations with the determination of enantiomeric purity. In addition to the chromatographic tools, in recent years, capillary electromigration techniques (CE, CEC, and MEKC) have been widely used for enantioselective purposes employing a variety of chiral selectors, e.g. CDs, polysaccharides, macrocyclic antibiotics, proteins, chiral ion-paring agents, etc. The high separation efficiency, rapid analysi,s and low consumption of reagents of electromigration methods make them a very attractive alternative to the conventional chromatographic methods. In this review, the development and applications of electrodriven methods for the enantioseparation of β-blocker drugs are reported. The papers concerning this topic, published from January 2000 until December 2010, are summarised here. Particular attention is given to the coupling of chiral CE and CEC methods to MS, as this detector provides high sensitivity and selectivity.

Chiral analysis of pharmaceuticals by capillary electrophoresis using antibiotics as chiral selectors

The review summarizes the use of the chiral capillary electrophoresis (CE) with different class of antibiotics as chiral selectors in the pharmaceutical field. Basic factors influencing the enantioseparation are shortly discussed. Non-aqueous capillary electrophoresis is also included as well as the coupling of CE to MS. The selection of a chiral selector according the ionic state and structure of the analyte is described. Summary of pharmaceutical applications of chiral CE is given.

The first contribution of capillary electrophoresis to the study of abiotic origins of homochirality: investigation of the enantioselective adsorption of 3-carboxy adipic acid on minerals

CE with UV detection was used for the first time to determine the enantioselective adsorption of the short-chain tricarboxylic acid, 3-carboxy adipic acid, on minerals as a mean of investigating plausible mechanisms for the origin of biochemical homochirality on Earth. The use of vancomycine as chiral selector in the separation buffer using the partial filling technique enabled the separation of the two enantiomers of this organic acid in about 12 min. Taking into account that this compound has a low absorption of the UV light, and in order to achieve the sensitivity needed to determine the enantiomeric excess of samples of 3-carboxy adipic acid adsorbed on minerals, we applied a strategy consisting of a field-amplified sample stacking together with the use of a bubble capillary and detection at low wavelength (192 nm). This combination enabled an LOD of about 10(-7) M and the determination of the enantiomeric excess of 3-carboxy adipic acid adsorbed on calcite and feldspar mineral samples at subnanomol levels of this acid. Results showed that an enantioselective adsorption of the enantiomers of 3-carboxy adipic acid on minerals took place.

Capillary electrophoresis for pharmaceutical analysis

This chapter describes the application of capillary electrophoresis (CE) to pharmaceutical analysis. The areas of pharmaceutical analysis covered are enantiomer separation, analysis of small molecules such as amino acids or drug counter-ions, pharmaceutical assay, related substances determinations, and physiochemical measurements such as log P and pKa of compounds. The different electrophoretic modes available and their advantages for pharmaceutical analysis are described. Recent applications of CE for each subject area are tabulated with electrolyte details. Information on electrolyte choice and method optimization to obtain optimal separations is included.

Synthesis and characterization of novel chiral ionic liquids and investigation of their enantiomeric recognition properties

We report the synthesis and characterization of amino acid ester based chiral ionic liquids, derived from L- and D-alanine tert butyl ester chloride. The synthesis was accomplished via an anion metathesis reaction between commercially available L- and D-alanine tert butyl ester chloride using a variety of counterions such as lithium bis (trifluoromethane) sulfonimide, silver nitrate, silver lactate, and silver tetrafluoroborate. Both enantiomeric forms were obtained as confirmed by bands of opposite sign in the circular dichroism spectra. The L- and D-alanine tert butyl ester bis (trifluoromethane) sulfonimide were obtained as liquids at room temperature and intriguingly exhibited the highest thermal stability (up to 263 degrees C). In addition, the ionic liquids demonstrated enantiomeric recognition ability as evidenced by splitting of racemic Mosher's sodium salt signal using a liquid state (19)F nuclear magnetic resonance (NMR) and fluorescence spectroscopy. The L- and D-alanine tert butyl ester chloride resulted in solid salts with nitrate, lactate, and tetrafluoroborate anions. This illustrates the previously observed tunability of ionic liquid synthesis, resulting in ionic liquids of varying properties as a function of varying the anion.

Determination of enantiomeric compositions of analytes using novel fluorescent chiral molecular micelles and steady state fluorescence measurements

Novel fluorescent chiral molecular micelles (FCMMs) were synthesized, characterized, and employed as chiral selectors for enantiomeric recognition of non-fluorescent chiral molecules using steady state fluorescence spectroscopy. The sensitivity of the fluorescence technique allowed for investigation of low concentrations of chiral selector (3.0 x 10(-5) M) and analyte (5.0 x 10(-6) M) to be used in these studies. The chiral interactions of glucose, tartaric acid, and serine in the presence of FCMMs poly(sodium N-undecanoyl-L-tryptophanate) [poly-L-SUW], poly(sodium N-undecanoyl-L-tyrosinate) [poly-L-SUY], and poly(sodium N-undecanoyl-L-phenylalininate) [poly-SUF] were based on diastereomeric complex formation. Poly-L-SUW had a significant fluorescence emission spectral difference as compared to poly-L-SUY and poly-L-SUF for the enantiomeric recognition of glucose, tartaric acid, and serine. Studies with the hydrophobic molecule alpha-pinene suggested that poly-L-SUY and poly-L-SUF had better chiral discrimination ability for hydrophobic analytes as compared to hydrophilic analytes. Partial-least-squares regression modeling (PLS-1) was used to correlate changes in the fluorescence emission spectra of poly-L-SUW due to varying enantiomeric compositions of glucose, tartaric acid, and serine for a set of calibration samples. Validation of the calibration regression models was determined by use of a set of independently prepared samples of the same concentration of chiral selector and analyte with varying enantiomeric composition. Prediction ability was evaluated by use of the root-mean-square percent relative error (RMS%RE) and was found to range from 2.04 to 4.06%.

Enantioseparation by CE with vancomycin as chiral selector: Improving the separation performance by dynamic coating of the capillary with poly(dimethylacrylamide)

An approach for improving the separation performance of the enantioseparation by CE with vancomycin as chiral selector is described. In the present method, a solution of poly(dimethylacrylamide) (PDMA) was used for dynamic coating of the capillary wall to minimize the adsorption of vancomycin onto the capillary wall, and to depress the EOF. Compared with the bare fused-silica capillaries and the capillaries coated with the polycationic polymer hexadimethrine bromide (HDB), the PDMA-coated capillary displayed the best separation performance. The resulting coating could withstand hundreds of runs without losing its function. Moreover, a partial filling technique was applied to avoid interference in detection caused by the presence of vancomycin in the buffer. The separation time was shortened when a short-end-injection technique was applied. Several parameters such as buffer pH, vancomycin concentration and plug length of the vancomycin solution for the separation were optimized. Under the optimal conditions, all tested enantiomers, including FMOC amino acids derivatives, ketoprofen and fenoprofen, were baseline-separated in less than 4.2 min.

Electrokinetic partial filling technique as a powerful tool for enantiomeric separation ofDL-lactic acid by CE with contactless conductivity detection

A modified partial filling method for chiral separation of DL-lactic acid as the model chiral compound with vancomycin chloride as the chiral selector was developed by CE with contactless conductivity detection. Electrokinetic partial filling technique (EK-PFT) was used as an alternative method to the conventional hydrodynamic partial filling method. EK-PFT, in contrast to the hydrodynamic partial filling technique, allowed the removal of the chloride counterions from the chiral selector which otherwise led to poor sensitivity in conductivity detection. The baseline separation of DL-lactic acid as the model analyte was achieved in 5 min in a polyacrylamide-coated capillary. The best resolution was achieved by electrokinetic partial filling of vancomycin cations from the injection solution containing 5 mmol/L oxalate L-histidinium at pH 4.5 with 10 mmol/L vancomycin chloride. Computer simulation was used to explain the observed phenomena in the boundary between the inject vial and the capillary during the EK-PFT of vancomycin cations.

Chiral separation principles in chromatographic and electromigration techniques

Almost half of the drugs in use today are chiral. It is well established that the pharmacological activity is mostly restricted to one of the enantiomers (eutomer). There can be qualitative and quantitative differences in the activity of the enantiomers. In many cases, the inactive enantiomer (distomer) shows unwanted side effects or even toxic effects. Even if the side effects are not that drastic, the distomer has to be metabolized and this represents an unnecessary burden for the organism. Therefore, the development of methods for the separation of enantiomers, both on analytical and preparative scale, has become increasingly important. Chromatographic techniques such as thin layer chromatography (TLC), gas chromatography (GC), supercritical fluid chromatography (SFC), and above all high-performance liquid chromatography (HPLC) have been used for enantiomer separation for about two decades. More recently, electromigration techniques, such as capillary electrophoresis and capillary electrochromatography, have been shown to be powerful alternatives to chromatographic methods. This review gives a short overview of different chiral separation principles and their application. Several new developments are discussed.