Hydrogen peroxide as an antibacterial factor in zinc oxide powder slurry

Chitosan hybrid nanomaterials: A study on interaction with biomimetic membranes

This study examined the influence of nanomaterials (NMs) on the organization of membrane lipids and the resulting morphological changes. The cell plasma membrane is heterogeneous, featuring specialized lipid domains in the liquid-ordered (Lo) phase surrounded by regions in the liquid-disordered (Ld) phase. We utilized model membranes composed of various lipids and lipid mixtures in different phase states to investigate the interactions between the NMs and membrane lipids. Specifically, we explored the interactions of pure chitosan (CS) and CS-modified nanocomposites (NCs) with ZnO, CuO, and SiO2 with four lipid mixtures: egg-phosphatidylcholine (EggPC), egg-sphingomyelin/cholesterol (EggSM/Chol), EggPC/Chol, and EggPC/EggSM/Chol, which represent the coexistence of Ld, Lo, and Ld/Lo, respectively. The data show that CS NMs increase the membrane lipid order at glycerol level probed by Laurdan spectroscopy. Additionally, the interaction of CS-based NMs with membranes leads to an increase in bending elasticity modulus, zeta potential, and vesicle size. The lipid order changes are most significant in the highly fluid Ld phase, followed by the Lo/Ld coexistence phase, and are less pronounced in the tightly packed Lo phase. CS NMs induced egg PC vesicle adhesion, fusion, and shrinking. In heterogeneous Lo/Ld membranes, inward invaginations and vesicle shrinking via the Ld phase were observed. These findings highlight mechanisms involved in CS NM-lipid interactions in membranes that mimic plasma membrane heterogeneity.

Exploring the mechanism underlying the antifungal activity of chitosan-based ZnO, CuO, and SiO2 nanocomposites as nanopesticides against Fusarium solani and Alternaria solani

Chitosan-based nanocomposites (CS NCs) are gaining considerable attention as multifaceted antifungal agents. This study investigated the antifungal activity of NCs against two phytopathogenic strains: Fusarium solani (F. solani) and Alternaria solani (A. solani). Moreover, it sheds light on their underlying mechanisms of action. The NCs, CS-ZnO, CS-CuO, and CS-SiO2, were characterized using advanced methods. Dynamic and electrophoretic light scattering techniques revealed their size range (60-170 nm) and cationic nature, as indicated by the positive zeta potential values (from +16 to +22 mV). Transmission electron microscopy revealed the morphology of the NCs as agglomerates formed between the chitosan and oxide components. X-ray diffraction patterns confirmed crystalline structures with specific peaks indicating their constituents. Antifungal assessments using the agar diffusion technique demonstrated significant inhibitory effects of the NCs on both fungal strains (1.5 to 4-fold), surpassing the performance of the positive control, nystatin. Notably, the NCs exhibited superior antifungal potency, with CS-ZnO NCs being the most effective. A. solani was the most sensitive strain to the studied agents. Furthermore, the tested NCs induced oxidative stress in fungal cells, which elevated stress biomarker levels, such as superoxide dismutase (SOD) activity and protein carbonyl content (PCC), 2.5 and 6-fold for the most active CS-CuO in F. solani respectively. Additionally, they triggered membrane lipid peroxidation up to 3-fold higher compared to control, a process that potentially compromises membrane integrity. Laurdan fluorescence spectroscopy highlighted alterations in the molecular organization of fungal cell membranes induced by the NCs. CS-CuO NCs induced a membrane rigidifying effect, while CS-SiO2 and CS-ZnO could rigidify membranes in A. solani and fluidize them in F. solani. In summary, this study provides an in-depth understanding of the interactions of CS-based NCs with two fungal strains, showing their antifungal activity and offering insights into their mechanisms of action. These findings emphasize the potential of these NCs as effective and versatile antifungal agents.

In vitro influence of PEG functionalized ZnO-CuO nanocomposites on bacterial growth

Polyethyleneglycol-coated biocompatible CuO-ZnO nanocomposites were fabricated hydrothermally varying Zn:Cu ratios as 1:1, 2:1, and 1:2, and their antibacterial activity was determined through the well diffusion method against the Gram-negative Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, and the Gram-positive Staphylococcus aureus. The minimum inhibitory concentration and the minimum bactericidal concentration values of the synthesized samples were determined. Subsequently, the time synergy kill assay was performed to elucidate the nature of the overall inhibitory effect against the aforementioned bacterial species. The mean zone of inhibition values for all four samples are presented. The inhibitory effect increased with increasing concentration of the nanocomposite (20, 40 and 60 mg/ml) on all the bacterial species except for S. aureus. According to the MBC/MIC ratio, ZnO was found to be bacteriostatic for E. coli and P. aeruginosa, and bactericidal for S. aureus and K. pneumoniae. Zn:Cu 2:1 was bactericidal on all bacterial species. A bacteriostatic effect was observed on E. coli and P. aeruginosa in the presence of Zn:Cu 1:1 whereas, it showed a bactericidal effect on S. aureus and K. pneumoniae. Zn:Cu 1:2 exhibited a bacteriostatic effect on E. coli while a bactericidal effect was observed for E. coli, P. aeruginosa, and K. pneumoniae. The metal oxide nanocomposites were found to be more sensitive towards the Gram-positive strain than the Gram-negative strains. Further, all the nanocomposites possess anti-oxidant activity as shown by the DPPH assay.

Treatment of postpartum endometritis induced by multidrug-resistant bacterial infection in dairy cattle by green synthesized zinc oxide nanoparticles and in vivo evaluation of its broad spectrum antimicrobial activity in cow uteri

Postpartum endometritis significantly affects the health and productivity of cattle, causing significant economic loss that is speculated to exceed billions of dollars annually. Treatment of postpartum endometritis, which is linked to various bacterial infections in the uterus after delivery and has an alarmingly high risk of antibiotic treatment failure for unidentified reasons, represents a great challenge. Several studies have demonstrated that various disease complications, such as multidrug-resistant (MDR) bacterial strains, prolonged infection treatment, and increased mortality risk, have emerged as a result of the extensive use of antibiotics to treat uterine infections and other microbial-related diseases. Recent research has led to the development of zinc oxide nanoparticles (ZnO NPs) that exhibit broad-spectrum antibacterial efficacy against bacterial pathogens, including MDR bacteria, without producing mutants that are resistant to zinc oxide (ZnO). In the present work, we biologically synthesized ZnO NPs from a green natural source of Helianthus annuus seeds for the treatment of endometritis caused by MDR bacterial strains in dairy cattle. We examined ZnO's potential as a substitute antimicrobial agent to treat cow endometritis by testing its ability to sustain potent antimicrobial activity against pathogenic bacteria, including Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), in cow uteri. Among uterine bacteria, ZnO significantly decreased E. coli and S. aureus, which are known pathogenic bacteria within the uterus and achieved a high cure rate that was associated with the induction of estrous and pregnancy. Taken together, our observations of ZnO's broad range of antibacterial activity in-vivo with an animal model and subsequent evaluations of its therapeutic efficacy in cows with endometritis shed light on its potential to be used as a substitute antimicrobial agent for the treatment of uterine illness.

Comparison of Titanium Dioxide and Zinc Oxide Photocatalysts for the Inactivation of Escherichia coli in Water Using Slurry and Rotating-Disk Photocatalytic Reactors

The application of photocatalysis for the disinfection of water has been extensively reported over the past 30 years. Titanium dioxide (TiO2) has been the most widely and successfully used photocatalyst to date; however, it is not without its limitations. Frequently observed long lag times, sometimes up to 60 min, before bacterial inactivation begins and the presence of residual microorganisms, for example, up to 104 colony forming units, remaining after treatment are ongoing challenges with this particular photocatalyst. It is therefore important to find alternative photocatalysts that can address these issues. In this study, we compared the disinfection capacity of TiO2 with that of zinc oxide (ZnO) using Escherichia coli as a model organism in both a suspended and immobilized catalyst system. Our results showed that ZnO was superior to TiO2 in a number of areas. Not only were bacterial rates of destruction much quicker with ZnO, but no lag time was observed prior to inactivation in suspended systems. Furthermore, complete bacterial destruction was observed within the treatment times under investigation. The greater efficiency of ZnO is believed to be due to the decomposition of the bacterial cell wall being driven by hydrogen peroxide as opposed to hydroxyl radicals. The results reported in this paper show that ZnO is a more efficient and cost-effective photocatalyst than TiO2 and that it represents a viable alternative photocatalyst for water disinfection processes.

Electrodeposited Zinc Coatings for Biomedical Application: Morphology, Corrosion and Biological Behaviour

The improvement of biodegradable metals is currently an active and promising research area for their capabilities in implant manufacturing. However, controlling their degradation rate once their surface is in contact with the physiological media is a challenge. Surface treatments are in the way of addressing the improvement of this control. Zinc is a biocompatible metal present in the human body as well as a metal widely used in coatings to prevent corrosion, due to its well-known metal protective action. These two outstanding characteristics make zinc coating worthy of consideration to improve the degradation behaviour of implants. Electrodeposition is one of the most practical and common technologies to create protective zinc coatings on metals. This article aims to review the effect of the different parameters involved in the electrochemical process on the topography and corrosion characteristics of the zinc coating. However, certainly, it also provides an actual and comprehensive description of the state-of-the-art of the use of electrodeposited zinc for biomedical applications, focusing on their capacity to protect against bacterial colonization and to allow cell adhesion and proliferation.

Nano-sized warriors: zinc chromium vanadate nanoparticles as a dual solution for eradicating waterborne enterobacteriaceae and fighting cancer

The revolution of biomedical applications has opened new avenues for nanotechnology. Zinc Chromium vanadate nanoparticles (VCrZnO4 NPs) have emerged as an up-and-coming candidate, with their exceptional physical and chemical properties setting them apart. In this study, a one-pot solvothermal method was employed to synthesize VCrZnO4 NPs, followed by a comprehensive structural and morphological analysis using a variety of techniques, including X-Ray diffraction, scanning electron microscopy, high-resolution transmission electron microscopy, Energy-dispersive X-ray, and X-ray photoelectron spectroscopy. These techniques confirmed the crystallinity of the NPs. The VCrZnO4 NPs were tested for their antibacterial activity against primary contaminants such as Enterobacteriaceae, including Shigella flexneri, Salmonella cholerasis, and Escherichia coli, commonly found in hospital settings, using the broth dilution technique. The results indicated a stronger antibacterial activity of VCrZnO4 NPs against Shigella and Salmonella than E. coli. Electron microscopy showed that the NPs caused severe damage to the bacterial cell wall and membrane, leading to cell death. In addition, the study evaluated the anticancer activities of the metal complexes in vitro using colorectal cancer cells (HCT-116) and cervical cancer cells (HELA), along with non-cancer cells and human embryonic kidney cells (HEK-293). A vanadium complex demonstrated efficient anticancer effects with half-inhibitory concentrations (IC₅₀) of 38.50+3.50 g/mL for HCT-116 cells and 42.25+4.15 g/mL for HELA cells. This study highlights the potential of Zinc Chromium vanadate nanoparticles as promising candidates for antibacterial and anticancer applications. Various advanced characterization techniques were used to analyze the properties of nanomaterials, which may help develop more effective and safer antibacterial and anticancer agents in the future.

Bioinspired Synthesis of Zinc Molybdate Nanoparticles: An Efficient Material for Growth Inhibition of Escherichia coli, Staphylococcus aureus, and Dye Remediation

Zinc molybdate nanoparticles with molybdate are synthesized through green method with different salt precursors using Moringa oleifera leaf extract. Those nanoparticles had structural, vibrational, and morphological properties, which were determined by X-ray diffraction (XRD). The crystalline size of synthesized zinc molybdate was 24.9 nm. Fourier transform infrared (FTIR) spectroscopy and field emission scanning electron microscopy (FE-SEM) clearly showed the attachment of molybdate with ZnO. The synthesized nanomaterial was also characterized through UV-visible spectroscopy which had 4.40 eV band gap energy. Those nanoparticles were also characterized via thermogravimetric analysis (TGA-DTA) and photoluminance spectroscopy (PL). ZnMoO4 had photocatalytic property via methylene blue dye. After 190 minutes, the dye changed to colourless from blue colour. The degradation efficiency was around 92.8%. It also showed their antibacterial effect via Escherichia coli and Staphylococcusaureus bacterial strains. In the presence of light and air, nanoparticles of ZnMoO4 inhibit the growth of cells of E. coli and S. aureus bacterial strains because of ROS (reactive oxygen species) generation. Because of the formation of singlet oxygen (O2∗-), hydrogen oxide radical (-OH∗), and hydrogen peroxide (H2O2), ZnMoO4 showed photodegradation reaction against aq. solution of methylene blue dye at 6 pH with constant time interval. With time, the activity of ZnMoO4 also decreased because of the generation of a layer of hydrogen oxide (-OH) on nanomaterial surface, which could be washed with ethanol and distilled water. After drying, the catalytic Zinc molybdate nanoparticles could be reused again in the next catalytic reaction.

Biogenic Zinc Oxide Nanoparticles and Their Biomedical Applications: A Review

Nanotechnology has inscribed novel perception into the material science and one of the most extensively used nanomaterials is Zinc oxide nanoparticles (ZnO NPs) with healthcare and biomedical applications. Because of its outstanding biocompatibility, low toxicity, and low cost, ZnO NPs have become one of the most prominent metal oxide NPs in biological applications. This review highlights the different aspects of ZnO NPs, like their green synthesis as a substitute of conventional route due to avoidance of threat of hazardous, costly precursors and subsequent mostly therapeutic applications. Due to their wide bandwidth and high excitation binding energy, ZnO NPs have undergone extensive research. In addition to their potential applications as antibiotics, antioxidants, anti-diabetics, and cytotoxic agents, ZnO NPs also hold a promising future as an antiviral treatment for SARS-CoV-2. Zn has antiviral properties and may be effective against a variety of respiratory virus species, particularly SARS-CoV-2. This review includes a variety of topics, including the virus's structural properties, an overview of infection mechanism, and current COVID-19 treatments. Nanotechnology-based techniques for the prevention, diagnosis, and treatment of COVID-19 are also discussed in this review.

Antifouling and Antimicrobial Study of Nanostructured Mixed-Matrix Membranes for Arsenic Filtration

Membrane fouling is a major drawback in the membrane filtration industry for water treatment. Mixed-matrix membranes (MMMs) are well known for their enhanced antifouling and antibacterial properties, which could offer potential benefits for membrane filtration processes in the water treatment field. In this work, three electrospun nanofibrous MMMs (P, CP, and MCP, which were, respectively, the pristine polysulfone membrane and mixed-matrix membranes (MMMs) consisting of GO-ZnO and GO-ZnO-iron oxides) were studied for antifouling and antibacterial properties with respect to the arsenic nanofiltration process. The effects of these composites on the antifouling behaviour of the membranes were studied by characterising the bovine serum albumin (BSA) protein adsorption on the membranes and subsequent analysis using microscopic (morphology via scanning electron microscopy) and Brunauer-Emmett-Teller (BET) analyses. The antibacterial properties of these membranes were also studied against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli). The composite nanoparticle-incorporated membranes showed improved antifouling properties in comparison with the pristine polysulfone (PSF) membrane. The excellent antimicrobial properties of these membranes make them appropriate candidates to contribute to or overcome biofouling issues in water or wastewater treatment applications.

Advanced Polymeric Nanocomposite Membranes for Water and Wastewater Treatment: A Comprehensive Review

Nanomaterials have been extensively used in polymer nanocomposite membranes due to the inclusion of unique features that enhance water and wastewater treatment performance. Compared to the pristine membranes, the incorporation of nanomodifiers not only improves membrane performance (water permeability, salt rejection, contaminant removal, selectivity), but also the intrinsic properties (hydrophilicity, porosity, antifouling properties, antimicrobial properties, mechanical, thermal, and chemical stability) of these membranes. This review focuses on applications of different types of nanomaterials: zero-dimensional (metal/metal oxide nanoparticles), one-dimensional (carbon nanotubes), two-dimensional (graphene and associated structures), and three-dimensional (zeolites and associated frameworks) nanomaterials combined with polymers towards novel polymeric nanocomposites for water and wastewater treatment applications. This review will show that combinations of nanomaterials and polymers impart enhanced features into the pristine membrane; however, the underlying issues associated with the modification processes and environmental impact of these membranes are less obvious. This review also highlights the utility of computational methods toward understanding the structural and functional properties of the membranes. Here, we highlight the fabrication methods, advantages, challenges, environmental impact, and future scope of these advanced polymeric nanocomposite membrane based systems for water and wastewater treatment applications.

In Situ Synthesis of AZO-Np in Guar Gum/PVOH Composite Fiber Mats for Potential Bactericidal Release

Since the number of antibiotic-resistant bacterial infections is growing and cases are getting worse every year, the search for new alternative bactericidal wound dressing treatments is becoming crucial. Within this context, the use of polysaccharides from plants and seeds in innovative biopolymer technologies is of key importance. In this work, bio-nano-composite guar gum/polyvinyl alcohol (PVOH) membranes loaded with aluminum-doped zinc oxide nanoparticles were produced via electrospinning. Citric acid was added to the mixture to increase spinnability. However, depending on the pH, zinc oxide nanoparticles are partially dissociated, decreasing their bactericidal efficiency. Thus, a second successful alkaline thermo-chemical regrowth step was added to the process to treat the obtained fibers. This alkaline thermo-chemical treatment reconstituted both the nanoparticles and their bactericidal properties. The Staphylococcus aureus antibacterial assay results show that the membranes obtained after the alkaline thermo-chemical treatment presented a 57% increase in growth inhibition.

Antimicrobial Perspectives of Active SiO2FexOy/ZnO Composites

The antibacterial activity of zinc oxide particles has received significant interest worldwide, especially through the implementation of technology to synthesize particles in the nanometer range. This study aimed to determine the antimicrobial efficacy of silica-based iron oxide matrix (SiO2FexOy) synthesized with various amounts of ZnO (SiO2FexOyZnO) against various pathogens. It is observed that, with the addition of ZnO to the system, the average size of the porosity of the material increases, showing increasingly effective antibacterial properties. Zinc-iron-silica oxide matrix composites were synthesized using the sol-gel method. The synthesized materials were investigated physicochemically to highlight their structural properties, through scanning electron microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), and Fourier-transform infrared spectroscopy (FT-IR). At the same time, surface area, pore size and total pore volume were determined for materials synthesized using the Brunauer-Emmett-Teller (BET) method. Although the material with 0.0001 g ZnO (600 m2/g) has the highest specific surface area, the best antimicrobial activity was obtained for the material with 1.0 g ZnO, when the average pore volume is the largest (~8 nm) for a specific surface of 306 m2/g. This indicates that the main role in the antibacterial effect has reactive oxygen species (ROS) generated by the ZnO that are located in the pores of the composite materials. The point of zero charge (pHpZc) is a very important parameter for the characterization of materials that indicate the acid-base behaviour. The pHpZc value varies between 4.9 and 6.3 and is influenced by the amount of ZnO with which the iron-silica oxide matrix is doped. From the antimicrobial studies carried out, it was found that for S. aureus the total antibacterial effect was obtained at the amount of 1.0 g ZnO. For Gram-negative bacteria, a total antibacterial effect was observed in S. flexneri (for the material with 0.1 g ZnO), followed by E. coli (for 1.0 g ZnO). For P. aeruginosa, the maximum inhibition rate obtained for the material with 1.0 g ZnO was approximately 49%.

Nanotechnological interventions of the microbiome as a next-generation antimicrobial therapy

The rise of antimicrobial resistance (AMR) impacts public health due to the diminished potency of existing antibiotics. The microbiome plays an important role in the host's immune system activity and shows the history of exposure to antimicrobials and its manipulation in combating antimicrobial resistance. Advancements in gene technologies, DNA sequencing, and computational biology have emerged as powerful platforms to better understand the relationship between animals and microorganisms (MOs). The past few years have witnessed an increase in the use of nanotechnology, both in industry and in academia, as tools to tackle antimicrobial resistance. New strategies of microbiome manipulation have been developed, such as the use of prebiotics, probiotics, peptides, antibodies, an appropriate diet, phage therapy, and the use of various nanotechnological techniques. Owing to the research outcomes, targeted delivery of antimicrobials with some modifications with nanoparticles can lead to the destruction of resistant microbial cells. In addition, nanoparticles have been studied for their potential antimicrobial effects both in vitro and in vivo. In this review, we highlight key opportunistic areas for applying nanotechnologies with the aim of manipulating the microbiome for the treatment of antimicrobial resistance. Besides providing a detailed review on various nanomaterials, technologies, opportunities, technical needs, and potential approaches for the manipulation of the microbiome to address these challenges, we discuss future challenges and our perspective.

Evaluating the Efficacy of Gum Arabic-Zinc Oxide Nanoparticles Composite Coating on Shelf-Life Extension of Mandarins (cv. Kinnow)

Restricted postharvest application of synthetic fungicides in maintaining the quality of citrus fruits has led to a search for alternative postharvest treatments. This study evaluated the efficacy of gum arabic (GA) enriched with green synthesized zinc oxide nanoparticles (ZnO-NPs) in maintaining the postharvest quality of mandarin (cv. Kinnow). ZnO-NPs were synthesized using Bidens pilosa leaf extract and incorporated into GA (2% w/v) at 0, 0.25, 0.5, and 1% to form composite coatings: GA, GA + ZnO-NP 0.25%, GA + ZnO-NP 0.5% and GA + ZnO-NP 1%, respectively. Fruit were dipped for 3 min in the respective coatings, with untreated fruit used as control. Fruit were air-dried, packed in commercial cartons, and stored at 5 ± 1°C and 90 ± 5% relative humidity (RH) for 40 days and observed at 10 days intervals, plus 5 days at 20 ± 5°C and 65 ± 5% RH to determine the incidence of physiological disorders. GA + ZnO-NP showed promise as an alternative postharvest treatment for controlling postharvest physiological disorders associated with 'Kinnow' mandarin. For instance, GA + ZnO-NP 0.5% markedly minimized weight loss (9.2%), electrolyte leakage (43.8%) and chilling injury incidence (5.4%) compared to control (weight loss; 33.3%, electrolyte leakage; 90.3% and chilling injury incidence; 41.5%) at the end of the storage. GA + ZnO-NP 1% significantly alleviated rind pitting, with 13.2% incidence compared to 45.2% rind pitting incidence in the control fruit. This was due to significantly higher phytochemical and antioxidant capacity and reduced antioxidant enzyme degradation in coated fruit than in control. In conclusion, gum arabic coating enriched with ZnO-NPs at concentrations between 0.5 and 1% is recommended as a viable option to maintain the quality of 'Kinnow' mandarin fruit during cold storage.

Antifungal activity of Zinc nitrate derived nano Zno fungicide synthesized from Trachyspermum ammi to control fruit rot disease of grapefruit

Grapefruit (Citrus paradisi) is a widely grown citrus and its fruit is affected by a variety of biotic and abiotic stress. Keeping in view the hazardous effects of synthetic fungicides, the recent trend is shifting towards safer and eco-friendly control of fruit diseases. The present study was aimed to diagnose the fruit rot disease of grapefruit and its control by using zinc oxide green nanoparticles (ZnO NPs). Fruit rot symptoms were observed in various grapefruit growing sites of Pakistan. Diseased samples were collected, and the disease-causing pathogen was isolated. Following Koch's postulates, the isolated pathogen was identified as Rhizoctonia solani. For eco-friendly control of this disease, ZnO NPs were prepared in the seed extract of Trachyspermum ammi and characterized. Fourier transform infrared spectroscopy (FTIR) of these NPs described the presence of stabilizing and reducing compounds such as phenols, aldehyde and vinyl ether, especially thymol (phenol). X-ray diffraction (XRD) analysis revealed their crystalline nature and size (48.52 nm). Energy dispersive X-ray (EDX) analysis elaborated the presence of major elements in the samples, while scanning electron microscopy (SEM) confirmed the morphology of bio fabricated NPs. ZnO NPs exhibited very good anti-fungal activity and the most significant fungal growth inhibition was observed at 1.0 mg/ml concentration of green NPs, in vitro and in vivo. These findings described that the bioactive constituents of T. ammi seed extract can effectively reduce and stabilize ZnO NPs. It is a cost-effective method to successfully control the fruit rot disease of grapefruit.

Genetic Signatures from Adaptation of Bacteria to Lytic Phage Identify Potential Agents to Aid Phage-Killing of Multidrug-Resistant Acinetobacter baumannii

With the increasing morbidity and mortality rates associated with multidrug-resistant bacteria, interest in bacteriophage therapy has been revived. However, bacterial resistance to phage infection threatens the usefulness of phage therapy, especially its inclusion in modern medicine. Multidrug-resistant Acinetobacter baumannii is a top priority pathogen requiring urgent intervention and new therapeutic approaches, such as phage therapy. Here, we experimentally adapted A. baumannii WHG40004 to its lytic phage P21, and thereafter isolated a phage-resistant bacterial mutant, named Ev5-WHG. We then aimed to identify potential agents to aid phage-killing of Ev5-WHG by analyzing its genome and that of the wildtype strain. The enriched Gene Ontology (GO) analysis based on genetic alterations in minor alleles and mutations showed that pathways such as zinc ion transport and cell membrane synthesis could play certain roles in phage resistance. Remarkably, the combination of zinc acetate and P21 showed increased bactericidal effect on Ev5-WHG. Significantly also, we showed that P21 completely prevented the growth of wildtype WHG40004 in the presence of antibiotics (meropenem and imipenem). The results from this study indicate that the analysis of phage resistance signatures during adaptation of bacteria to a lytic phage can inform choice of agents to work cooperatively with phage to limit and/or reverse resistance. This approach could be important for guiding future successful phage therapy. Importance Bacteriophages have proven very useful as alternative therapeutic agents in combating multidrug-resistant bacterial infections, however, bacterial resistance to phages threatens their use. In this study, we showed a new strategy of leveraging on genetic signatures that accompany phage resistance in bacteria to predict agents that can be used with lytic phages to combat multidrug-resistant Acinetobacter baumannii. Significantly, this approach was helpful in suggesting the use of zinc acetate to reduce resistance in phage-resistant bacteria, as well as the use of phage with antibiotics meropenem and imipenem to prevent resistance in wildtype strain of MDR A. baumannii. The approach of this study will be helpful for improving the outcome of phage therapy and in overcoming antimicrobial resistance.

Supplementation of nano-zinc in lower doses as an alternative to pharmacological doses of ZnO in weanling pigs

A set of studies was performed to determine the influence of dietary ZnO concentration and source during two phases (days 0 to 14 and days 15 to 28). Experiment 1: 168 weaned piglets were allocated to four treatment groups in six replicates. The treatments included a basal diet without ZnO supplementation (control), 2,500 mg ZnO/kg (In2500), 500 mg nano-ZnO/kg (N500), and 150 mg nano-ZnO/kg (N150). Experiment 2: 168 weaned piglets were divided into three treatment groups with eight replicates. The treatments included control, In2500, N300, and 150 mg nano-ZnO/kg (N150). An in vitro trial showed that the growth of Listeria monocytogenes, Escherichia coli, and Salmonella typhimurium was inhibited when exposed to 300 and 500 ppm of ZnO after 24 h of incubation. In experiment 1, the average daily gain (ADG) by the pigs was improved in the N500 and IN2500 treatment groups. Colonization of coliforms and Clostridium spp. significantly decreased in the pigs fed the N500 and IN2500 diets in phase 1. The total plasma antioxidant capacity was greater in the IN2500 and N500 treatment groups than in the control. Superoxide dismutase (SOD) activity was greater in pigs fed the IN2500 (phase 1) or the IN2500 and N500 (phase 2) diets than in the control and N150 treatment group. In experiment 2, pigs in the N300 treatment group showed a higher ADG and lower fecal score colonization of coliforms and Clostridium spp. compared with those in the N150 treatment group. In conclusion, nano-ZnO at a dose of 300 ppm showed the same growth as the pharmacological dose of Zn. This provides an option to the pharmacological dose.

Tailoring of Novel Azithromycin-Loaded Zinc Oxide Nanoparticles for Wound Healing

Skin is the largest mechanical barrier against invading pathogens. Following skin injury, the healing process immediately starts to regenerate the damaged tissues and to avoid complications that usually include colonization by pathogenic bacteria, leading to fever and sepsis, which further impairs and complicates the healing process. So, there is an urgent need to develop a novel pharmaceutical material that promotes the healing of infected wounds. The present work aimed to prepare and evaluate the efficacy of novel azithromycin-loaded zinc oxide nanoparticles (AZM-ZnONPs) in the treatment of infected wounds. The Box-Behnken design and response surface methodology were used to evaluate loading efficiency and release characteristics of the prepared NPs. The minimum inhibitory concentration (MIC) of the formulations was determined against Staphylococcus aureus and Escherichia coli. Moreover, the anti-bacterial and wound-healing activities of the AZM-loaded ZnONPs impregnated into hydroxyl propyl methylcellulose (HPMC) gel were evaluated in an excisional wound model in rats. The prepared ZnONPs were loaded with AZM by adsorption. The prepared ZnONPs were fully characterized by XRD, EDAX, SEM, TEM, and FT-IR analysis. Particle size distribution for the prepared ZnO and AZM-ZnONPs were determined and found to be 34 and 39 nm, respectively. The mechanism by which AZM adsorbed on the surface of ZnONPs was the best fit by the Freundlich model with a maximum load capacity of 160.4 mg/g. Anti-microbial studies showed that AZM-ZnONPs were more effective than other controls. Using an experimental infection model in rats, AZM-ZnONPs impregnated into HPMC gel enhanced bacterial clearance and epidermal regeneration, and stimulated tissue formation. In conclusion, AZM -loaded ZnONPs are a promising platform for effective and rapid healing of infected wounds.

Mechanical and antibacterial properties of ZnO/chitosan bio-composite films

In the current study, ZnO/chitosan bio-composite films were produced via solution-casting method. Two different ZnO powders, micrometer (d50 ≅ 1.5 μm) and nanometer sized (d50 ≅ 100 nm), were used to investigate the effect of ZnO particle size and concentration (0, 2, and 8% w/w of chitosan) on the mechanical and antibacterial properties of the ZnO/chitosan bio-composite films. The incorporation of the ZnO powders into the chitosan film resulted in an increase in the tensile strength (TS) and a decrease in the elongation at break (EB) values. Mechanical test results revealed that TS and EB properties were considerably affected (p < 0.05) by the concentration and particle size of the ZnO reinforcement. Disc diffusion method demonstrated good antibacterial activities of bio-composite films containing high amount of ZnO (8% w/w of chitosan) against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, and Bacillus subtilis. The growth-limiting effect of the films was more pronounced for S. aureus and K. pneumoniae. Due to enhanced TS and imparted antibacterial activity of the produced ZnO/chitosan bio-composite films, these materials are promising candidates for applications such as food packaging, wound dressing, and antibacterial coatings for various surfaces.

Influence of Physical Dimension and Morphological-Dependent Antibacterial Characteristics of ZnO Nanoparticles Coated on Orthodontic NiTi Wires

White spot lesions (WSLs) are one of the adverse effects of fixed orthodontic treatments. They are the primary sign of caries, which means inhibiting this process by antibacterial agents will reverse the procedure. The current study tested the surface modification of nickel-titanium (NiTi) wires with ZnO nanoparticles (NPs), as antimicrobial agents. As the morphology of NPs is one of the most critical factors for their properties, the antibacterial properties of different morphologies of ZnO nanostructures coated on the NiTi wire were investigated. For the preparation of ZnO nanostructures, five coating methods, including chemical vapor deposition (CVD), chemical precipitation method, polymer composite coating, sol-gel synthesis, and electrospinning process, were used. The antibacterial activity of NPs was assessed against Streptococcus mutans by the colony counting method. The obtained results showed that all the samples had antibacterial effects. The antibacterial properties of ZnO NPs were significantly improved when the specific surface area of particles increased, by the ZnO nanocrystals prepared via the CVD coating method.

Effect of Polyethylene Film Thickness on the Antimicrobial Activity of Embedded Zinc Oxide Nanoparticles

Microbial contamination of most foods occurs primarily at the surface during postprocessing and handling; therefore, preventing cross-contamination by incorporation of antimicrobial substances in contact with the surface of the product is an efficient strategy in reducing food contamination risks. Zinc oxide nanoparticles (ZnONPs) have been used widely to achieve antimicrobial films in various applications including the food industry. This work describes the fabrication of antimicrobial polymeric films containing ZnONPs produced by the coextrusion and dip-coating techniques. Effects of skin layer thicknesses containing ZnONPs on the antimicrobial effectiveness of the film by their capability to inactivate Gram-positive and Gram-negative bacteria were studied for both methods. The antimicrobial properties of the coextruded multilayer LLDPE/ZnONP nanocomposite films evidenced antimicrobial activity in the range 0.5-1.5 log reductions, while in the case of a sandblasted multilayer film, it showed high antimicrobial properties as around 99.99%. The optical properties of coextruded multilayer films were measured and discussed. Furthermore, to achieve a thinner LLDPE thickness, ZnONPs were coated with different concentrations of LLDPE solution by the dip-coating method. TEM confirmed that a homogeneous layer is formed on the surface of ZnONPs. The thickness of the LLDPE layer estimated by TEM was about 2 nm and film produced 3 log and 4 log reductions for E. coli and S. aureus, respectively. The results show that developed films have the potential to be used as food packaging films and can extend shelf life, maintain quality, and assure the safety of food. The antimicrobial mechanisms of ZnONPs were also investigated. It was found that direct contact of particles with products is necessary to assure high antibacterial activity of the films.

Alternatives to Conventional Antibiotic Therapy: Potential Therapeutic Strategies of Combating Antimicrobial-Resistance and Biofilm-Related Infections

Antibiotics have been denoted as the orthodox therapeutic agents for fighting bacteria-related infections in clinical practices for decades. Nevertheless, overuse of antibiotics has led to the upsurge of species with antimicrobial resistance (AMR) or multi-drug resistance. Bacteria can also grow into the biofilm, which accounts for at least two-thirds of infections. Distinct gene expression and self-produced heterogeneous hydrated extracellular polymeric substance matrix architecture of biofilm contribute to their tolerance and externally manifest as antibiotic resistance. In this review, the difficulties in combating biofilm formation and AMR are introduced, and novel alternatives to antibiotics such as metal nanoparticles and quaternary ammonium compounds, chitosan and its derivatives, antimicrobial peptides, stimuli-responsive materials, phage therapy and other therapeutic strategies, from compounds to hydrogel, from inorganic to biological, are discussed. We expect to provide useful information for the readers who are seeking for solutions to the problem of AMR and biofilm-related infections.

Antifungal effects of ZnO, TiO2 and ZnO-TiO2 nanostructures on Aspergillus flavus

This study aimed to synthesis ZnO, TiO₂, and ZnO-TiO₂ (ratio weight of 1/1 for Zn/Ti) nanoparticles using zinc acetate and titanium isopropoxide through the sol-gel method. Physicochemical and morphological characterization and antifungal properties evaluation like minimum inhibition concentration (MIC) and minimum fungicide concentration (MFC) of nanopowders were investigated against A.flavus in vitro. All synthesized nanoparticles (50 μg/ml) showed fungal growth inhibition, while ZnO-TiO₂ showed higher antifungal activity against A. flavus than pure TiO₂ and ZnO. TiO₂ and ZnO-TiO₂ (300 μg/ml) inhibited 100% of spur production. Pure ZnO and TiO₂ showed pyramidal and spherical shapes, respectively, whereas ZnO-TiO₂ nanopowders illustrated both spherical and pyramidal shapes with grown particles on the surface. Based on our findings, a low concentration (150 μg/ml) of ZnO-TiO₂ showed higher ROS production and oxidative stress induction, thus the fungicide effect as compared to alone TiO₂ and ZnO. In conclusion, ZnO-TiO₂ nanostructure can be utilized as a useful antifungal compound, but more studies need to be performed to understand the antifungal mechanism of the nanoparticles rather than ROS inducing apoptosis.

Microwave Mediated Fast Synthesis of Silver Nanoparticles and Investigation of Their Antibacterial Activities for Gram-Positive and Gram-Negative Microorganisms

Herein, a simple one-step microwave irradiation technique has been used to synthesize the silver nanoparticles using silver nitrate (AgNO3) solution and cetyltrimethyl ammonium bromide (CTAB) as a stabilizing agent. The crystals of as-prepared nanoparticles were studied using X-ray diffraction (XRD) and a selected area electron diffraction (SAED) pattern, confirming the single-phase face-centered cubic structure. The optical property measured using UV-Vis spectroscopy shows an absorption maximum at 420 nm, which also confirms the formation of silver nanoparticles. Transmission electron microscopy (TEM) analysis revealed that the silver nanoparticles have a spherical shape with an average diameter of ~6 nm. The antibacterial properties of silver nanoparticles were investigated using both Gram-positive and Gram-negative microorganisms, such as Staphylococcus aureus, Pseudomonas aeruginosa, andEscherichia coli. Klebsiella pneumoniae, and Candida albicans. Results showed a highest zone of inhibition of about 35 mm against P. aeruginosa as compared with E. coli (21 mm), S. aureus (30 mm), K. pneumonia (28 mm), and C. albicans (29 mm). These studies suggested that silver nanoparticles prepared by this fast and effective method might be developed as antibacterial agents against an extensive range of microorganisms to control and stop the spreading and persistence of bacterial infections.

Exploitation of Antimicrobial Nanoparticles and Their Applications in Biomedical Engineering

Antibiotic resistance is a major threat to public health, which contributes largely to increased mortality rates and costs in hospitals. The severity and widespread nature of antibiotic resistance result in limited treatments to effectively combat antibiotic-resistant pathogens. Nanoparticles have different or enhanced properties in contrast to their bulk material, including antimicrobial efficacy towards a broad range of microorganisms. Their beneficial properties can be utilised in various bioengineering technologies. Thus, antimicrobial nanoparticles may provide an alternative to challenge antibiotic resistance. Currently, nanoparticles have been incorporated into materials, such as fibres, glass and paints. However, more research is required to elucidate the mechanisms of action fully and to advance biomedical applications further. This paper reviews the antimicrobial efficacies and the intrinsic properties of different metallic nanoparticles, their potential mechanisms of action against certain types of harmful pathogens and how these properties may be utilised in biomedical and healthcare products with the aim to reduce cross contaminations, disease transmissions and usage of antibiotics.

Weaning Induced Gut Dysfunction and Nutritional Interventions in Nursery Pigs: A Partial Review

Weaning is one of the most stressful events in the life of a pig. Unsuccessful weaning often leads to intestinal and immune system dysfunctions, resulting in poor growth performance as well as increased morbidity and mortality. The gut microbiota community is a complex ecosystem and is considered an "organ," producing various metabolites with many beneficial functions. In this review, we briefly introduce weaning-associated gut microbiota dysbiosis. Then, we explain the importance of maintaining a balanced gut microbiota. Finally, we discuss dietary supplements and their abilities to restore intestinal balance and improve the growth performance of weaning pigs.

Natural bio-based monomers for biomedical applications: a review

In recent years, synthetic and semi-synthetic polymer materials have been widely used in various applications. Especially concerning biomedical applications, their biocompatibility, biodegradability, and non-toxicity have increased the interest of researchers to discover and develop new products for the well-being of humanity. Among the synthetic and semi-synthetic materials, the use of natural bio-based monomeric materials presents a possible novel avenue for the development of new biocompatible, biodegradable, and non-toxic products. The purpose of this article is to review the information on the role of natural bio-based monomers in biomedical applications. Increased eco-friendliness, biocompatibility, biodegradability, non-toxicity, and intrinsic biological activity are some of the attributes which make itaconic, succinic, citric, hyaluronic, and glutamic acids suitable potential materials for biomedical applications. Herein, we summarize the most recent advances in the field over the past ten years and specifically highlight new and interesting discoveries in biomedical applications. Natural origin acid-based bio-monomers for biomedical applications.

Water-Resistant Latex Coatings: Tuning of Properties by Polymerizable Surfactant, Covalent Crosslinking and Nanostructured ZnO Additive

This paper deals with the development of acrylic latexes providing high-performance water-resistant coatings. For this purpose, mutual effects of anionic surfactant type (ordinary and polymerizable), covalent intra- and/or interparticle crosslinking (introduced by allyl methacrylate copolymerization and keto-hydrazide reaction, respectively) and ionic crosslinking (provided by nanostructured ZnO additive) were investigated. The latexes were prepared by the standard emulsion polymerization of methyl methacrylate, butyl acrylate and methacrylic acid as the main monomers. The addition of surface-untreated powdered nanostructured ZnO was performed during latex synthesis, resulting in stable latexes comprising dispersed nanosized additive in the content of ca 0.9−1.0 wt.% (based on solids). The coating performance with emphasis on water resistance was evaluated. It was determined that the application of the polymerizable surfactant improved coating adhesion and water-resistance, but it wasn′t able to ensure high water-resistance of coatings. Highly water-resistant coatings were obtained provided that covalent intra- and interparticle crosslinking together with ionic crosslinking were employed in the coating composition, forming densely crosslinked latex films. Moreover, coatings comprising nanostructured ZnO additive displayed a significant antibacterial activity and improved solvent resistance.

Effects of different concentrations of coated nano zinc oxide material on fecal bacterial composition and intestinal barrier in weaned piglets

BACKGROUND

Coated nano zinc oxide (Cnz) is a new feed or food additive, which is a potential replacement for a pharmacological dose level of ZnO. This study evaluated the positive effects of different concentrations of Cnz on the intestinal bacterial core, enterobacterial composition and mucosal barrier function in a pig model.

RESULTS

Microbiota sequencing results showed that Cnz could significantly alter the intestinal microbiota composition and metabolism. Besides increasing the richness indices (ACE and Chao1), 10% Cnz could protect the intestinal mucosal barrier through increasing the expression of occludin and zonula occludens-1 in the small intestine, increase the abundance of Lachnospiraceae UCG-004 and decrease the abundance of Ruminococcus flavefaciens compared to high ZnO diet and 5% Cnz material.

CONCLUSIONS

Cnz material at 10% supplementation is more effective than a level of 5% Cnz in increasing intestinal barrier through affecting gut microbiota. © 2020 Society of Chemical Industry.

Novel Nanocomposite PLA Films with Lignin/Zinc Oxide Hybrids: Design, Characterization, Interaction with Mesenchymal Stem Cells

Herein we present the production of novel nanocomposite films consisting of polylactic acid (PLA) polymer and the inclusion of nanoparticles of lignin (LNP), ZnO and hybrid ZnO@LNP (ZnO, 3.5% wt, ICP), characterized by similar regular shapes and different diameter distribution (30-70 nm and 100-150 nm, respectively). The obtained set of binary, ternary and quaternary systems were similar in surface wettability and morphology but different in the tensile performance: while the presence of LNP and ZnO in PLA caused a reduction of elastic modulus, stress and deformation at break, the inclusion of ZnO@LNP increased the stiffness and tensile strength (σb = 65.9 MPa and EYoung = 3030 MPa) with respect to neat PLA (σb = 37.4 MPa and EYoung = 2280 MPa). Neat and nanocomposite PLA-derived films were suitable for adult human bone marrow-mesenchymal stem cells and adipose stem cell cultures, as showed by their viability and behavior comparable to control conditions. Both stem cell types adhered to the films' surface by vinculin focal adhesion spots and responded to the films' mechanical properties by orchestrating the F-actin-filamin A interaction. Collectively, our results support the biomedical application of neat- and nanocomposite-PLA films and, based on the absence of toxicity in seeded stem cells, provide a proof of principle of their safety for food packaging purposes.

Crotalaria verrucosa Leaf Extract Mediated Synthesis of Zinc Oxide Nanoparticles: Assessment of Antimicrobial and Anticancer Activity

In this work, we present an ecofriendly, non-hazardous, green synthesis of zinc oxide nanoparticles (ZnO NPs) by leaf extract of Crotalaria verrucosa (C. verrucosa). Total phenolic content, total flavonoid and total protein contents of C. verrucosa were determined. Further, synthesized ZnO NPs was characterized by UV-visible spectroscopy (UV-vis), X-ray diffractometer (XRD), Fourier transform infra-red (FTIR) Spectra, transmission electron microscope (TEM), and Dynamic light scattering (DLS) analysis. UV-vis shows peak at 375 nm which is unique to ZnO NPs. XRD analysis demonstrates the hexagonal phase structures of ZnO NPs. FTIR spectra demonstrates the molecules and bondings associated with the synthesized ZnO NPs and assures the role of phytochemical compounds of C. verrucosa in reduction and capping of ZnO NPs. TEM image exhibits that the prepared ZnO NPs is hexagonal shaped and in size ranged between 16 to 38 nm which is confirmed by DLS. Thermo-gravimetric analysis (TGA) was performed to determine the thermal stability of biosynthesized nanoparticles during calcination. The prepared ZnO NPs showed significant antibacterial potentiality against Gram-positive (S. aureus) and Gram-negative (Proteus vulgaris, Klebsiella pneumoniae, and Escherichia coli) pathogenic bacteria and SEM image shows the generalized mechanism of action in bacterial cell after NPs internalization. In addition, NPs are also found to be effective against the studied cancer cell lines for which cytotoxicity was assessed using MTT assay and results demonstrate highest growth of inhibition at the concentration of 100 µg/mL with IC50 value at 7.07 µg/mL for HeLa and 6.30 µg/mL for DU145 cell lines, in contrast to positive control (C. verrucosa leaf extract) with IC50 of 22.30 µg/mL on HeLa cells and 15.72 µg/mL on DU145 cells. Also, DAPI staining was performed in order to determine the effect on nuclear material due to ZnO NPs treatment in the studied cell lines taking leaf extract as positive control and untreated negative control for comparison. Cell migration assay was evaluated to determine the direct influence of NPs on metastasis that is potential suppression capacity of NPs to tumor cell migration. Outcome of the synthesized ZnO NPs using C. verrucosa shows antimicrobial activity against studied microbes, also cytotoxicity, apoptotic mediated DNA damage and antiproliferative potentiality in the studied carcinoma cells and hence, can be further used in biomedical, pharmaceutical and food processing industries as an effective antimicrobial and anti-cancerous agent.