Preparation and structural properties of Pd nanoparticles in layered silicate

Photocatalytic activity of Ag/Al2O3-Gd2O3 photocatalysts prepared by the sol-gel method in the degradation of 4-chlorophenol

The photocatalytic activity in the degradation of 4-chlorophenol (4-ClPh) in aqueous medium (80 ppm) using 2.0 wt% Ag/Al2O3-Gd2O3 (Ag/Al-Gd-x; where x = 2.0, 5.0, 15.0, 25.0 and 50.0 wt% of Gd2O3) photocatalysts prepared by the sol-gel method was studied under UV light irradiation. The photocatalysts were characterized by N2 physisorption, X-ray diffraction, SEM, HRTEM, UV-Vis, XPS, FTIR and fluorescence spectroscopy. About 67.0% of 4-ClPh was photoconverted after 4 h of UV light irradiation using Ag/γ--Al2O3. When Ag/Al-Gd-x photocatalysts were tested, the 4-ClPh photoconversion was improved and more than 90.0% of 4-ClPh was photoconverted after 3 h of UV light irradiation in the materials containing 15.0 and 25.0 wt% of Gd2O3. Ag/Al-Gd-25 was the material with the highest efficacy to mineralize dissolved organic carbon, mineralizing more than 85.0% after 4 h of UV light irradiation. Silver nanoparticles and micro-particles of irregular pentagonal shape intersected by plane nanobelts of Al2O3-Gd2O3 composite oxide were detected in the Ag/Al-Gd-25 photocatalyst. This material is characterized by a lowest recombination rate of electron-hole pairs. The low recombination rate of photo-induced electron-hole pairs in the Ag/Al-Gd-x photocatalysts with high Gd2O3 contents (≥15.0 wt%) confirmes that the presence of silver nanoparticles and microparticles interacting with Al2O3-Gd2O3 composite oxide entities favors the separation of photo-induced charges (e- and h+). These materials could be appropriate to be used as highly efficient photocatalysts to eliminate high concentrations of 4-ClPh in aqueous medium.

Sonochemical intercalation of preformed gold nanoparticles into multilayered clays

Multilayered Na (+)-montmorillonite clays intercalated with Au nanoparticles were synthesized by direct ultrasonic impregnation of preformed gold colloid into the clay matrix. The sonicated composite product then consists of Au nanoparticles homogeneously dispersed in the clay. The resulting clay/nano-Au composite was calcined at 800 degrees C and characterized by BET surface area analysis, transmission electron microscopy, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared measurements. Nearly spherical-shaped gold nanoparticles, with a size of 6 +/- 0.5 nm, are located in the pores of clay calcined at 800 degrees C. Their nanocomposites are thermally stable as was shown by thermogravimetric analysis. No aggregation of the gold nanoparticles was observed during calcination. The proposed ultrasonic intercalation approach is an universal one and can be employed for synthesis of catalytically active metal-clay nanocomposites stable at high temperatures with high dispersability of the metal nanoparticles in the clay matrix.

Photocatalytic Synthesis of Silver Nanoparticles Stabilized by TiO2Nanorods: A Semiconductor/Metal Nanocomposite in Homogeneous Nonpolar Solution

A novel colloidal approach toward semiconductor/metal nanocomposites is presented. Organic-soluble anatase TiO(2) nanorods are used for the first time to stabilize Ag nanoparticles in optically clear nonpolar solutions in the absence of specific ligands for silver. Metallic silver is generated upon UV illumination of deaerated TiO(2) solutions containing AgNO(3). The Ag nanoparticles can be obtained in different size-morphological regimes as a function of the irradiation time, due to light-induced photofragmentation and ripening processes. A mechanism for the colloidal stabilization of the silver nanoparticles is tentatively suggested, which regards the TiO(2) nanorods as inorganic stabilizers, thus acting in the same manner as conventional surfactant molecules. The proposed photocatalytic approach offers a convenient method for producing TiO(2)/Ag nanocomposite systems with a certain control over the metal particle size without the use of surfactants and/or additives. Stable colloidal TiO(2)-nanorod-stabilized Ag nanoparticles can be potentially available for a number of applications that require "clean" metal surfaces, such as homogeneous organic catalysis, photocatalysis, and sensing devices.