Whole-cell biosensor for direct determination of solvent vapours

A whole-cell amperometric herbicide biosensor based on magnetically functionalised microalgae and screen-printed electrodes

We report the fabrication of an amperometric whole-cell herbicide biosensor based on magnetic retention of living cells functionalised with magnetic nanoparticles (MNPs) on the surface of a screen-printed electrode. We demonstrate that Chlorella pyrenoidosa microalgae cells coated with biocompatible MNPs and retained on the electrode with a permanent magnet act as a sensing element for the fast detection of herbicides. The magnetic functionalisation does not affect the viability and photosynthesis activity-mediated triazine herbicide recognition in microalgae. The current of ferricyanide ion was recorded during alternating illumination periods and biosensor fabricated was used to detect atrazine (from 0.9 to 74 µM) and propazine (from 0.6 to 120 µM) (the limits of detection 0.7 and 0.4 µM, respectively). We believe that the methodology presented here can be widely used in fabrication of a number of whole cell biosensors since it allows for efficient and reversible cells immobilisation and does not affect the cellular metabolism.

Interfacing living unicellular algae cells with biocompatible polyelectrolyte-stabilised magnetic nanoparticles

Green algae are a promising platform for the development of biosensors and bioelectronic devices. Here we report a reliable single-step technique for the functionalisation of living unicellular green algae Chlorella pyrenoidosa with biocompatible 15 nm superparamagnetic nanoparticles stabilised with poly(allylamine hydrochloride). The magnetised algae cells can be manipulated and immobilised using external permanent magnets. The distribution of the nanoparticles on the cell walls of C. pyrenoidosa was studied by optical and fluorescence microscopy, TEM, SEM and EDX spectroscopy. The viability and the magnetic properties of the magnetised algae are studied in comparison with the native cells. The technique may find a number of potential applications in biotechnology and bioelectronics.

Analysis of toxin-induced changes in action potential shape for drug development

The generation of an action potential (AP) is a complex process in excitable cells that involves the temporal opening and closing of several voltage-dependent ion channels within the cell membrane. The shape of an AP can carry information concerning the state of the involved ion channels as well as their relationship to cellular processes. Alteration of these ion channels by the administration of toxins, drugs, and biochemicals can change the AP's shape in a specific way, which can be characteristic for a given compound. Thus, AP shape analysis could be a valuable tool for toxin classification and the measurement of drug effects based on their mechanism of action. In an effort to begin classifying the effect of toxins on the shape of intracellularly recorded APs, patch-clamp experiments were performed on NG108-15 hybrid cells in the presence of veratridine, tetraethylammonium, and quinine. To analyze the effect, the authors generated a computer model of the AP mechanism to determine to what extent each ion channel was affected during compound administration based on the changes in the model parameters. This work is a first step toward establishing a new assay system for toxin detection and identification by AP shape analysis.

Divalent cu, cd, and pb biosorption in mixed solvents

Dead dried Chlorella vulgaris was studied in terms of its performance in binding divalent copper, cadmium, and lead ions from their aqueous or 50% v/v methanol, ethanol, and acetone solutions. The percentage uptake of cadmium ions exhibited a general decrease with decrease in dielectric constant values, while that of copper and lead ions showed a general decrease with increase in donor numbers. Uptake percentage becomes less sensitive to solvent properties the larger the atomic radius of the biosorbed ion, and uptake of copper was the most affected. FT-IR analyses revealed stability of the biomass in mixed solvents and a shift in vibrations of amide(I) and (II), carboxylate, glucose ring, and metal oxygen upon metal binding in all media. Delta(nuCOO) values (59-69 cm(-1)) confirmed bidentate metal coordination to carboxylate ligands. The value of nu(as)COO increased slightly upon Cu, Cd, and Pb biosorption from aqueous solutions indicating lowering of symmetry, while a general decrease was noticed in mixed solvents pointing to the opposite. M-O stretching frequencies increased unexpectedly with increase in atomic mass as a result of solvent effect on the nature of binding sites. Lowering polarity of the solvent permits variations in metal-alga bonds strengths; the smaller the metal ion, the more affected.

Microalgae fiber optic biosensors for herbicide monitoring using sol-gel technology

Three microalgal species (Dictyosphaerium chlorelloides (D.c.), Scenedesmus intermedius (S.i.) and Scenedesmus sp. (S.s.)) were encapsulated in silicate sol-gel matrices and the increase in the amount of chlorophyll fluorescence signal was used to quantify simazine. Influence of several parameters on the preparation of the sensing layers has been evaluated: effect of pH on sol-gel gelation time; effect of algae density on sensor response; influence of glycerol (%) on the membrane stability. Long term stability was also tested and the fluorescence signal from biosensors remained stable for at least 3 weeks. D.c. biosensor presented the lowest detection limits for simazine (3.6 microg L(-1)) and the broadest dynamic calibration range (19-860 microg L(-1)) with IC(50) 125+/-14 microg L(-1). Biosensor was validated by HPLC with UV/DAD detection. The biosensor showed response to those herbicides that inhibit the photosynthesis at photosystem II (triazines: simazine, atrazine, propazine, terbuthylazine; urea based herbicides: linuron). However, no significant increases of fluorescence response was obtained for similar concentrations of 2,4-D (hormonal herbicide) or Cu(II). The combined use of two biosensors that use two different genotypes, sensitive and resistant to simazine, jointly allowed improving microalgae biosensor specificity.

Toxin detection based on action potential shape analysis using a realistic mathematical model of differentiated NG108-15 cells

The NG108-15 neuroblastoma/glioma hybrid cell line has been frequently used for toxin detection, pharmaceutical screening and as a whole-cell biosensor. However, detailed analysis of its action potentials during toxin or drug administration has not been accomplished previously using patch clamp electrophysiology. In order to explore the possibility of identifying toxins based on their effect on the shape of intracellularly or extracellularly detected action potentials, we created a computer model of the action potential generation of this cell type. To generate the experimental data to validate the model, voltage dependent sodium, potassium and high-threshold calcium currents, as well as action potentials, were recorded from NG108-15 cells with conventional whole-cell patch-clamp methods. Based on the classic Hodgkin-Huxley formalism and the linear thermodynamic description of the rate constants, ion-channel parameters were estimated using an automatic fitting method. Utilizing the established parameters, action potentials were generated in the model and were optimized to represent the actual recorded action potentials to establish baseline conditions. To demonstrate the applicability of the method for toxin detection and discrimination, the effect of tetrodotoxin (a sodium channel blocker) and tefluthrin (a pyrethroid that is a sodium channel opener) were studied. The two toxins affected the shape of the action potentials differently and their respective effects were identified based on the changes in the fitted parameters. Our results represent one of the first steps to establish a complex model of NG108-15 cells for quantitative toxin detection based on action potential shape analysis of the experimental results.

Orientation and confinement of cells on chemically patterned polystyrene surfaces

UV/ozone oxidation was combined with a photomasking technique to produce adjacent regions of different chemistry on polystyrene (PS) surfaces. The surface chemistry and topography were studied using AFM, XPS and contact angle measurements. The physicochemical patterns were visualised by the condensation of water vapour upon the surfaces and by the differential attachment of Chinese hamster ovarian (CHO) cells. The orientation of CHO cells on 55 and 125 microm wide oxidised PS strips were measured and found to be highly dependent on the width of the oxidised feature. CHO cells in relatively close proximity to a linear polar/non-polar border showed significant axial alignment along the border. CHO cells can also be confined to specific regions of the polymer surface. Cells attached to larger areas (75 microm x 75 microm) were found to have a smaller average cell size than cells attached to the smaller (56 microm x 56 microm) areas.

Cellular attachment and spatial control of cells using micro-patterned ultra-violet/ozone treatment in serum enriched media

Ultra-violet Ozone (UVO) modified polystyrene (PS) surfaces were analyzed by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle (CA), optical microscopy (OM) and cell culture experiments. UV/Ozone treatment up to 900 s was used to increase the surface oxygen concentration of PS surfaces from 0% to approximately 35% (unwashed) and 0% to approximately 27% (washed). The observed differences in oxygen concentration, between washed and unwashed surfaces, have been previously attributed to the removal of low molecular weight debris produced in this treatment process. Surface roughness (Rq) is known to affect cellular attachment and proliferation. AFM studies of the UV/Ozone treated PS surfaces show the surface roughness is an order of magnitude less than that expected to cause an effect. UV/Ozone treatment of PS showed a marked change in CA which decreased to approximately 60 degrees after 900 s treatment. The increased attachment and proliferation of Chinese hamster ovarian (CHO) and mouse embryo 3T3-L1 (3T3) cells on the treated surfaces compared to untreated PS were found to correlate strongly with the increase in surface oxygen concentration. Surface chemical oxidation patterns on the PS were produced using a simple masking technique and a short UV/Ozone treatment time, typically 20-45 s. The chemical patterns on PS were visualized by water condensation and the spatially selective attachment of CHO and 3T3-L1 cells cultured with 10% (v/v) serum. This paper describes an easily reproducible, one step technique to produce a well-defined, chemically heterogeneous surface with a cellular resolution using UV/Ozone modification. By using a variety of cell types, that require different media conditions, we have been able to expand the potential applications of this procedure.

A novel approach to improve specificity of algal biosensors using wild-type and resistant mutants: an application to detect TNT

A new genetic approach was developed for increasing specificity of microalgal biosensors. This method is based on the use of two different genotypes jointly to detect a given pollutant: (i) a sensitive genotype to obtain sensitivity; and (ii) a resistant mutant to obtain specificity. The method was tested by the development of a microalgal biosensor for the detection of the explosive 2,4,6-trinitrotoluene (TNT) using a wild-type strain (DcG1wt) of Dictyosphaerium chlorelloides (Chlorophyceae) as the sensitive organism, and a TNT-resistant mutant, obtained from DcG1wt strain by a modified Luria-Delbrück fluctuation analysis. The inhibition of chlorophyll a fluorescence of PSII by TNT was used as the biological signal. Significant differences in maximal fluorescence of light-adapted algae (F'(m)) between wild-type DcG1wt cells and TNT-resistant mutants, were observed in all the TNT concentrations tested (from 0.5 to 31.3 mg l(-1)) after only 3 min of exposure. Resistant mutants always exhibited significant higher F'(m) values in the presence of TNT than wild-type cells. These results suggest that the use of two different genotypes (sensitive and resistant to a given pollutant) jointly is a useful method to improve microalgal biosensors specificity.

Using higher organisms in biological early warning systems for real-time toxicity detection

Many biological early warning systems (BEWS) have been developed in recent years that evaluate the physiological and behavioral responses of whole organisms to water quality. Using a fish ventilatory monitoring system developed at the US Army Centre for Environmental Health Research as an example, we illustrate the operation of a BEWS at a groundwater treatment facility. During a recent 12-month period, the fish ventilatory system was operational for 99% of the time that the treatment facility was on-line. Effluent-exposed fish responded as a group about 2.8% of the time. While some events were due to equipment problems or non-toxic water quality variations, the fish system did indicate effluent anomalies that were subsequently identified and corrected. The fish monitoring BEWS increased treatment facility engineers' awareness of effluent quality and provided an extra measure of assurance to regulators and the public. Many operational and practical considerations for whole organism BEWS are similar to those for cell- or tissue-based biosensors. An effective biomonitoring system may need to integrate the responses of several biological and chemical sensors to achieve desired operational goals. Future development of an 'electronic canary', analogous to the original canary in the coal mine, could draw upon advances in signal processing and communication to establish a network of sensors in a watershed and to provide useful real-time information on water quality.

Stand-off tissue-based biosensors for the detection of chemical warfare agents using photosynthetic fluorescence induction

Tissue biosensors made from immobilized whole-cell photosynthetic microorganisms have been developed for the detection of airborne chemical warfare agents and simulants. The sensor read-out is based on well-known principles of fluorescence induction by living photosynthetic tissue. Like the cyanobacteria and algae from which they were constructed, the sensors are robust and mobile. The fluorescence signal from the sensors was stable after 40 days, storage and they can be launched or dropped into suspected danger zones. Commercially available hand-held fluorometric detector systems were used to measure Photosystem II (PSII) photochemical efficiency of green algae and cyanobacteria entrapped on filter paper disks. Toxic agents flowing in the gas stream through the sensors can alter the characteristic fluorescence induction curves with resultant changes in photochemical yields. Tabun (GA), sarin (GB), mustard agent, tributylamine (TBA) (a sarin stabilizer), and dibutyl sulfide (DBS) (a mustard agent analog) were tested. Upper threshold limits of detectability for GA, TBA, and DBS are reported. With additional research and development, these biosensors may find application in stand-off detection of chemical and perhaps biological warfare agents under real-world conditions.

Direct biologically based biosensing of dynamic physiological function

Dynamic regulation of biological systems requires real-time assessment of relevant physiological needs. Biosensors, which transduce biological actions or reactions into signals amenable to processing, are well suited for such monitoring. Typically, in vivo biosensors approximate physiological function via the measurement of surrogate signals. The alternative approach presented here would be to use biologically based biosensors for the direct measurement of physiological activity via functional integration of relevant governing inputs. We show that an implanted excitable-tissue biosensor (excitable cardiac tissue) can be used as a real-time, integrated bioprocessor to analyze the complex inputs regulating a dynamic physiological variable (heart rate). This approach offers the potential for long-term biologically tuned quantification of endogenous physiological function.

A biosensor for the detection of gas toxicity using a recombinant bioluminescent bacterium

A whole-cell biosensor was developed for the detection of gas toxicity using a recombinant bioluminescent Escherichia coli harboring a lac::luxCDABE fusion. Immobilization of the cells within LB agar has been done to maintain the activity of the microorganisms and to detect the toxicity of chemicals through the direct contact with gas. Benzene, known as a representative volatile organic compound, was chosen as a sample toxic gas to evaluate the performance of this biosensor based on the bioluminescent response. This biosensor showed a dose-dependent response, and was found to be reproducible. The immobilizing matrices of this biosensor were stored at 4 degrees C and were maintained for at least a month without any noticeable change in its activity. The optimal temperature for sensing was 37 degrees C. A small size of this sensor kit has been successfully fabricated, and found to be applicable as a disposable and portable biosensor to monitor the atmospheric environment of a workplace in which high concentrations of toxic gases could be discharged.

An ISFET-algal (Chlamydomonas) hybrid provides a system for eco-toxicological tests

A cellular sensoring system was designed in which metabolism-dedicated pH-ISFETs and the unicellular green alga Chlamydomonas reinhardtii as a biological component, were combined. The system permits on-line detection of pH changes caused by the metabolic and photosynthetic activities of the cells. Photosynthetic activity results in a basification of the medium caused by uptake of CO2. In darkness, an acidification of the medium, resulting from the production of CO2 by degradation of starch was observed. Both, acidification and basification, are sensitive indicators for the physiological activity of the alga. Experiments using inhibitors of energy metabolism or photosynthesis illustrate the utility of this system for an on-line monitoring of substances of eco-toxicological importance.