Development and characterisation of a head calibration phantom for in vivo measurements of actinides

3D-printed biological cell phantom for testing 3D quantitative phase imaging systems

As the 3D quantitative phase imaging (QPI) methods mature, their further development calls for reliable tools and methods to characterize and compare their metrological parameters. We use refractive index engineering during two-photon laser photolithography to fabricate a life-scale phantom of a biological cell with internal structures that mimic optical and structural properties of mammalian cells. After verification with a number of reference techniques, the phantom is used to characterize the performance of a limited-angle holographic tomography microscope.

Development of a high resolution voxelised head phantom for medical physics applications

Computational anthropomorphic phantoms have become an important investigation tool for medical imaging and dosimetry for radiotherapy and radiation protection. The development of computational phantoms with realistic anatomical features contribute significantly to the development of novel methods in medical physics. For many applications, it is desirable that such computational phantoms have a real-world physical counterpart in order to verify the obtained results. In this work, we report the development of a voxelised phantom, the HIGH_RES_HEAD, modelling a paediatric head based on the commercial phantom 715-HN (CIRS). HIGH_RES_HEAD is unique for its anatomical details and high spatial resolution (0.18×0.18mm² pixel size). The development of such a phantom was required to investigate the performance of a new proton computed tomography (pCT) system, in terms of detector technology and image reconstruction algorithms. The HIGH_RES_HEAD was used in an ad-hoc Geant4 simulation modelling the pCT system. The simulation application was previously validated with respect to experimental results. When compared to a standard spatial resolution voxelised phantom of the same paediatric head, it was shown that in pCT reconstruction studies, the use of the HIGH_RES_HEAD translates into a reduction from 2% to 0.7% of the average relative stopping power difference between experimental and simulated results thus improving the overall quality of the head phantom simulation. The HIGH_RES_HEAD can also be used for other medical physics applications such as treatment planning studies. A second version of the voxelised phantom was created that contains a prototypic base of skull tumour and surrounding organs at risk.

Use of in vivo counting measurements to estimate internal doses from (241)Am in workers from the Mayak production association

Comparisons between results of in vivo counting measurements of americium burden and results from radiochemical analyses of organ samples taken at autopsy of 11 cases of former Mayak workers were made. The in vivo counting measurements were performed 3-8 y before death. The best agreement between in vivo counting measurements for americium and autopsy data was observed for the skull. For lungs and liver, the ratios of burden measured by in vivo counting to those obtained from radiochemical analyses data ranged from 0.7-3.8, while those for the skull were from 1.0-1.1. There was a good correlation between the estimates of americium burden in the entire skeleton obtained from in vivo counting with those obtained from autopsy data. Specifically, the skeletal burden ratio, in vivo counting/autopsy, averaged 0.9 ± 0.1. The prior human americium model, D-Am2010, used in vivo counting measurements for americium in the skeleton to estimate the contents of americium and plutonium at death. The results using this model indicate that in vivo counting measurements of the skull can be used to estimate internal doses from americium in the Mayak workers. Additionally, these measurements may also be used to provide a qualitative assessment of internal doses from plutonium.

Comparison of geometries for in vivo measurements of actinides in the skull

In vivo measurement of actinide activity in the skeleton is a valuable source of information on human internal contamination. Estimates of skeleton activity are based on measurements of the knee, elbow or skull. Different laboratories use different measurement geometries. Different calibration phantoms and detectors are used, making a comparison of detection efficiencies rather difficult. This paper compares various head measurement geometries when using MC simulations with a voxel head phantom.

External radiation doses from (137)Cs to frog phantoms in a wetland area: in situ measurements and dose model calculations

For assessment of external radiation doses to frogs in a wetland area contaminated with (137)Cs, frog phantoms were constructed from polymethyl methacrylate (PMMA). The frog phantoms contained thermoluminescence (TL) chips and were used in situ at two study sites to measure doses. To test if higher doses are received by the sensitive skin of frogs, extra-thin TL chips were applied close to the surface of the frog phantoms. In addition, the measured doses were compared with those calculated on the basis of soil sample data from the wetland multiplied with dose-conversion coefficients from the US Department of Energy's RESRAD-BIOTA code and from the ERICA assessment tool. Measured doses were generally lower than those calculated to ellipsoids used to model frogs. Higher doses were measured at the frog phantoms' surfaces in comparison to inner parts at one of the two sites indicating that the frogs' thin skin could receive a higher radiation dose than expected. In the efforts to assure protection of non-human biota, in situ measurements with phantoms provide valuable dose information and input to dose models in site-specific risk assessments of areas contaminated with radionuclides.

Treating voxel geometries in radiation protection dosimetry with a patched version of the Monte Carlo codes MCNP and MCNPX

The question of Monte Carlo simulation of radiation transport in voxel geometries is addressed. Patched versions of the MCNP and MCNPX codes are developed aimed at transporting radiation both in the standard geometry mode and in the voxel geometry treatment. The patched code reads an unformatted FORTRAN file derived from DICOM format data and uses special subroutines to handle voxel-to-voxel radiation transport. The various phases of the development of the methodology are discussed together with the new input options. Examples are given of employment of the code in internal and external dosimetry and comparisons with results from other groups are reported.

Monte Carlo modelling of a voxel head phantom for in vivo measurement of bone-seeker nuclides

Whole-body counters (WBCs) are used for the assessment of the internal contamination of actinides in the human body. WBCs require adequate calibration procedures that rely on the use of suitable calibration phantoms. A previous study carried out at the ENEA-Radiation Protection Institute was aimed at designing a head calibration phantom in which a heterogeneous distribution of 241Am point sources could satisfactorily approximate an assumed homogeneous contamination throughout the head bones. Suitable correction factors for the WBC detection efficiencies were evaluated with Monte Carlo. The present paper summarises the main aspects and implications of an advanced modelling technique based on a VOXEL approach. The methodology could be extended to other bone-seeker radionuclides.