Study on ceria-modified SnO2 for CO and CH4 oxidation

Fabricating Robust Pt Clusters on Sn-Doped CeO2 for CO Oxidation: A Deep Insight into Support Engineering and Surface Structural Evolution

The size effect on nanoparticles, which affects the catalysis performance in a significant way, is crucial. The tuning of oxygen vacancies on metal-oxide support can help reduce the size of the particles in active clusters of Pt, thus improving catalysis performance of the supported catalyst. Herein, Ce-Sn solid solutions (CSO) with abundant oxygen vacancies have been synthesized. Activated by simple CO reduction after loading Pt species, the catalytic CO oxidation performance of Pt/CSO was significantly better than that of Pt/CeO₂ . The reasons for the elevated activity were further explored regarding ionic Pt single sites being transformed into active Pt clusters after CO reduction. Due to more exposed oxygen vacancies, much smaller Pt clusters were created on CSO (ca. 1.2 nm) than on CeO₂ (ca. 1.8 nm). Consequently, more exposed active Pt clusters significantly improved the ability to activate oxygen and directly translated to the higher catalytic oxidation performance of activated Pt/CSO catalysts in vehicle emission control applications.

Synthesis, Structural and Sensor Properties of Nanosized Mixed Oxides Based on In2O3 Particles

The paper considers the relationship between the structure and properties of nanostructured conductometric sensors based on binary mixtures of semiconductor oxides designed to detect reducing gases in the environment. The sensor effect in such systems is determined by the chemisorption of molecules on the surface of catalytically active particles and the transfer of chemisorbed products to electron-rich nanoparticles, where these products react with the analyzed gas. In this regard, the role is evaluated of the method of synthesizing the composites, the catalytic activity of metal oxides (CeO₂, SnO₂, ZnO), and the type of conductivity of metal oxides (Co₃O₄, ZrO₂) in the sensor process. The effect of oxygen vacancies present in the composites on the performance characteristics is also considered. Particular attention is paid to the influence of the synthesis procedure for preparing sensitive layers based on CeO₂-In₂O₃ on the structure of the resulting composites, as well as their conductive and sensor properties.

A catalyst powder-based spraying approach for rapid and efficient removal of fire-generated CO：From laboratory to pilot scale

In confined space fires, the large amount of CO generated by incomplete combustion of carbon-based materials poses a serious threat to the trapped people. However, the efficient method of removing CO in such disasters remains a great challenge. Herein, a spraying catalyst powder (SCP) approach is proposed for CO removal by oxidizing CO to harmless CO₂. Cu/Mn catalyst, synthesized by using ethylene glycol as solvent, was employed in this study. The influence of catalyst concentration, temperature, CO₂ concentration and initial CO concentration on CO removal performance of SCP approach was investigated. With 500 g/m³ catalyst, 25,000 ppm CO could be reduced to 2550 ppm within 1 min and completely removed in less than 2.83 min at 200 °C. The feasibility of SCP approach in practical application was validated by the remarkable CO removal performance for charcoal combustion in confined tunnel. SCP approach could effectively reduce the CO concentration, which would reach up to 12,659 ppm in the absence of SCP approach, to less than 1500 ppm within 30 min. The experiment results suggest that SCP technology can effectively remove the fire-generated CO and is promising for practical application in crowded occupancies, such as underground space and aircraft compartment.

Pt/CeO2 and Pt/CeSnOx Catalysts for Low-Temperature CO Oxidation Prepared by Plasma-Arc Technique

We applied a method of plasma arc synthesis to study effects of modification of the fluorite phase of ceria by tin ions. By sputtering active components (Pt, Ce, Sn) together with carbon from a graphite electrode in a helium ambient we prepared samples of complex highly defective composite PtCeC and PtCeSnC oxide particles stabilized in a matrix of carbon. Subsequent high-temperature annealing of the samples in oxygen removes the carbon matrix and causes the formation of active catalysts Pt/CeO_x and Pt/CeSnO_x for CO oxidation. In the presence of Sn, X-Ray Diffraction (XRD) and High-Resolution Transmission Electron Microscopy (HRTEM) show formation of a mixed phase CeSnO_x and stabilization of more dispersed species with a fluorite-type structure. These factors are essential for the observed high activity and thermic stability of the catalyst modified by Sn. X-Ray Photoelectron Spectroscopy (XPS) reveals the presence of both Pt²⁺ and Pt⁴⁺ ions in the catalyst Pt/CeO_x, whereas only the state Pt²⁺ of platinum could be detected in the Sn-modified catalyst Pt/CeSnO_x. Insertion of Sn ions into the Pt/CeO_x lattice destabilizes/reduces Pt⁴⁺ cations in the Pt/CeSnO_x catalyst and induces formation of strikingly high concentration (up to 50% at.) of lattice Ce³⁺ ions. Our DFT calculations corroborate destabilization of Pt⁴⁺ ions by incorporation of cationic Sn in Pt/CeO_x. The presented results show that modification of the fluorite lattice of ceria by tin induces substantial amount of mobile reactive oxygen partly due to affecting geometric parameters of ceria by tin ions.

A study on the catalytic oxidation of soot by Sn–Ce composite oxides: adsorbed oxygen and defect sites synergistically enhance catalytic activity

Two reaction paths in the presence of a Sn–Ce catalyst with H₂O (path 1) and without H₂O (path 2).

Elucidating the promotional effects of niobia on SnO2 for CO oxidation: developing an XRD extrapolation method to measure the lattice capacity of solid solutions

Using an XRD extrapolation method, the SnO₂ lattice capacity for Nb₂O₅ is quantified. A Sn–Nb solid solution without excess Nb₂O₅ is promising for CO oxidation.

Enhancement of resistance to chlorine poisoning of Sn-modified MnCeLa catalysts for chlorobenzene oxidation at low temperature

The Sn-modified MnCeLa catalysts show significantly higher resistance to chlorine poisoning than MnCeLa catalysts at different temperatures.

Atomically thin tin dioxide sheets for efficient catalytic oxidation of carbon monoxide

The thinner the better: SnO2 sheets that are five atomic layers thick are an efficient catalyst for the oxidation of CO. These sheets, which have 40% surface atom occupancy and are fabricated by a scalable ethylenediamine-assisted pathway, show remarkably improved catalytic performances compared to other SnO2 species, with the apparent activation energy lowered to 59.2 kJ mol(-1) and the full-conversion-temperature lowered to 250 °C.