Structural differences between "dark" and "bright" isolated human osteonic lamellae

Mineralized Collagen Fibrils: An Essential Component in Determining the Mechanical Behavior of Cortical Bone

Bone comprises mechanically different materials in a specific hierarchical structure. Mineralized collagen fibrils (MCFs), represented by tropocollagen molecules and hydroxyapatite nanocrystals, are the fundamental unit of bone. The mechanical characterization of MCFs provides the unique adaptive mechanical competence to bone to withstand mechanical load. The structural and mechanical role of MCFs is critical in the deformation mechanisms of bone and the marvelous strength and toughness possessed by bone. However, the role of MCFs in the mechanical behavior of bone across multiple length scales is not fully understood. In the present study, we shed light upon the latest progress regarding bone deformation at multiple hierarchical levels and emphasize the role of MCFs during bone deformation. We propose the concept of hierarchical deformation of bone to describe the interconnected deformation process across multiple length scales of bone under mechanical loading. Furthermore, how the deterioration of bone caused by aging and diseases impairs the hierarchical deformation process of the cortical bone is discussed. The present work expects to provide insights on the characterization of MCFs in the mechanical properties of bone and lays the framework for the understanding of the multiscale deformation mechanics of bone.

Lamellar thickness measurements in control and osteogenesis imperfecta human bone, with development of a method of automated thickness averaging to simplify quantitation

Lamellar bone that forms in moderate and severe osteogenesis imperfecta (OI) is composed of structurally irregular lamellae compared to those in control bone. OI and control cortical bone fragments were prepared for light microscopy in standardized fashion: decalcified, embedded in plastic, sectioned and stained with toluidine blue. Polarization light microscopy (PLM) was used to demonstrate and quantify bright and dark lamellar thicknesses in cortical bone fragments from 5 patients with moderate to severe OI in whom type I collagen structural/molecular defects were detected and in control bone from 5 patients. Rigid selection criteria identified lamellar regions for quantification. Thicknesses of bright and dark lamellae were measured manually at 20X magnification using a histomorphometric image analysis system. A method of automated thickness averaging was developed to determine lamellar thicknesses from PLM images to make measurement faster. Our study demonstrates, for the first time, that in OI bone from patients with type I collagen structural/molecular defects mean lamellar thickness measurements (along with the bright and dark lamellar thicknesses) were less than those in control bone by statistically highly significant differences. The mean value for bright lamellae was less than that for dark lamellae in both control and OI bone. The ratio of mean values for bright/dark lamellar thicknesses was the same in control and OI bone. The automated method obtained similar results to the manual method. Lamellar bone in moderate and severe OI with type I collagen defects is composed of thinner and less structurally regular lamellae than those in control bone. This finding indicates that lamellar thickness measurements can be helpful in assessing the effect of specific collagen and collagen-related mutations on OI bone synthesis and warrant inclusion in research and clinical histomorphometric assessments.

Closing cones create conical lamellae in secondary osteonal bone

Lamellae are sheets of mineralized collagen 1-20 µm thick, extending over hundreds of µm in bone tissue, occupying bone's structural hierarchy at a level above collagen fibres and osteocytes, and below osteons and trabeculae. Osteons are tubular arrangements of lamellae surrounding central neurovascular canals. Lamellae in osteons are usually described as concentric cylinders based on their annular appearance in transverse section. In this review, I provide a perspective on current understanding of the relationship between geometry of the bone formation front and the shape of lamellae produced at it, reaching the conclusion that the 'closing cone' bone formation front in secondary osteonal remodelling must necessarily result in cone-shaped lamellae in the mature secondary osteon. Secondary osteons replace primary osteons through a tunnelling process of bone turnover, meaning that conical lamellae may become more common in older and damaged bone which is at greatest risk of fracture. Visualization and measurement of three-dimensional lamellar shape over hundreds of microns is needed to provide data for accurate micromechanical simulations. Treating secondary osteonal lamellae as a 'stack of cones' rather than 'nested cylinders' may have important implications for our appreciation of bone's function as a load-bearing tissue and of its behaviour in fracture.

A Polarized Raman Spectroscopic Method for Advanced Analyses of the Osteon Lamellar Structure of Human Bone

Raman spectroscopy has recently been used for quantitative analyses of cortical bone tissue and related materials, such as dentin and enamel. While those analyses have proven useful as potential diagnostic tools, the Raman spectrum of bone encrypts a wealth of additional molecular scale details about structure and crystal arrangement, which are yet to be unfolded. Such details directly link to both bone physiology and pathology. In this work, a triple monochromator spectrometer with high spectral resolution, employed in polarized light configurations, was used to extract quantitative details about the preferential crystallographic orientation of apatite and collagen components in a human proximal femoral cortical bone sample. This body of information was then used to model the bone structure at the nanometric scale through a methodology that could be key in assessments of bone structure in health and disease.

Closing the osteon: Do osteocytes sense strain rate rather than fluid flow?

Osteons are cylindrical structures of bone created by matrix resorbing osteoclasts, followed by osteoblasts that deposit new bone. Osteons align with the principal loading direction and it is thought that the osteoclasts are directed by osteocytes, the mechanosensitive cells that reside inside the bone matrix. These osteocytes are presumably controlled by interstitial fluid flow, induced by the physiological loading of bones. Here I consider the stimulation of osteocytes while the osteon is closed by osteoblasts. In a conceptual finite element model, bone is considered a poro-elastic material and subjected to locomotion-induced loading conditions. It appears that the magnitude of flow is constant along the closing cone, while shear strain rate in the bone matrix diminishes linearly with the deposition of bone. This suggests that shear strain rate, rather than fluid flow, is the physical cue that controls osteocytes and bone deposition in newly formed osteons.

Collagen Fiber Orientation Is Coupled with Specific Nano-Compositional Patterns in Dark and Bright Osteons Modulating Their Biomechanical Properties

Bone continuously adapts to its mechanical environment by structural reorganization to maintain mechanical strength. As the adaptive capabilities of bone are portrayed in its nano- and microstructure, the existence of dark and bright osteons with contrasting preferential collagen fiber orientation (longitudinal and oblique-angled, respectively) points at a required tissue heterogeneity that contributes to the excellent fracture resistance mechanisms in bone. Dark and bright osteons provide an exceptional opportunity to deepen our understanding of how nanoscale tissue properties influence and guide fracture mechanisms at larger length scales. To this end, a comprehensive structural, compositional, and mechanical assessment is performed using circularly polarized light microscopy, synchrotron nanocomputed tomography, focused ion beam/scanning electron microscopy, quantitative backscattered electron imaging, Fourier transform infrared spectroscopy, and nanoindentation testing. To predict how the mechanical behavior of osteons is affected by shifts in collagen fiber orientation, finite element models are generated. Fundamental disparities between both osteon types are observed: dark osteons are characterized by a higher degree of mineralization along with a higher ratio of inorganic to organic matrix components that lead to higher stiffness and the ability to resist plastic deformation under compression. On the contrary, bright osteons contain a higher fraction of collagen and provide enhanced ductility and energy dissipation due to lower stiffness and hardness.

Theoretical mathematics, polarized light microscopy and computational models in healthy and pathological bone

The needs of everyday life, such as counting and measuring, are roots of theoretical mathematics. I believe these roots are why mathematical ideas ground research so amazingly well within many scientific fields. Initially trained as a theoretical mathematician and having collaborated with non-mathematicians in the field of bone research, I address the advantages and challenges of collaborations across fields of research among investigators trained in different disciplines. I report on the mathematical ideas that have guided my research on the mechanics of bone tissue. I explain how the mathematical ideas of local vs. global properties influence my research. Polarized light microscopy (PLM) is a tool that I use consistently, in association with other microscopy techniques, to investigate bone in its healthy state and in the presence of bone disease, in humans and in animal models. I review the results that I and investigators around the world have obtained with PLM. Applied to thin bone sections, PLM yields extinct (black) and bright (white) signals that are interpreted in terms of the orientation of collagen type I, by means of other microscopy techniques. Collagen type I is an elementary component of bone tissue. Its orientation is important for the mechanical function of bone. Images obtained by PLM at a specific bone site yield big data sets regarding collagen orientation. Multiple data sets in respect of multiple sites are often needed for research because the bone tissue differs by location in response to the distinct forces acting on it. Mathematics, defined by philosophers as the theory of patterns, offers the backdrop for pattern identification in the big data sets regarding collagen orientation. I also discuss the computational aspect of the research, pursuant to which the patterns identified are incorporated in simulations of mechanical behaviors of bone. These mathematical ideas serve to understand the role of collagen orientation in bone fracture risk.

Dynamic structure and composition of bone investigated by nanoscale infrared spectroscopy

Bone is a highly organized tissue in which each structural level influences the macroscopic and microscopic mechanical behavior. In particular, the quantity, quality, and distribution of the different bone components, i.e. collagen matrix and hydroxyapatite crystals, are associated with bone strength or fragility. Common spectroscopic techniques used to assess bone composition have resolutions limited to the micrometer range. In this study, our aims were two-fold: i) to develop and validate the AFM-IR methodology for skeletal tissues and ii) to apply the methodology to sheep cancellous bone with the objective to obtain novel findings on the composition and structure of trabecular packets.To develop the methodology, we assessed spatial and temporal reproducibility using a known homogeneous material (polymethylmethacrylate, PMMA). We verified that the major peak positions were similar and not shifted when compared to traditional Fourier Transform Infrared imaging (FTIRI). When AFM-IR was applied to sheep cancellous bone, the mineral-to-matrix ratio increased and the acid phosphate substitution ratio decreased as a function of tissue maturity. The resolution of the technique enabled visualization of different stages of the bone maturation process, particularly newly-formed osteoid prior to mineralization. We also observed alternating patterns of IR parameters in line and imaging measurements, suggesting the apposition of layers of alternating structure and / or composition that were not visible with traditional spectroscopic methods. In conclusion, nanoscale IR spectroscopy demonstrates novel compositional and structural changes within trabecular packets in cancellous bone. Based on these results, AFM-IR is a valuable tool to investigate cancellous bone at the nanoscale and, more generally, to analyze small dynamic areas that are invisible to traditional spectroscopic methods.

The three-dimensional arrangement of the mineralized collagen fibers in elephant ivory and its relation to mechanical and optical properties

Elephant tusks are composed of dentin or ivory, a hierarchical and composite biological material made of mineralized collagen fibers (MCF). The specific arrangement of the MCF is believed to be responsible for the optical and mechanical properties of the tusks. Especially the MCF organization likely contributes to the formation of the bright and dark checkerboard pattern observed on polished sections of tusks (Schreger pattern). Yet, the precise structural origin of this optical motif is still controversial. We hereby address this issue using complementary analytical methods (small and wide angle X-ray scattering, cross-polarized light microscopy and scanning electron microscopy) on elephant ivory samples and show that MCF orientation in ivory varies from the outer to the inner part of the tusk. An external cohesive layer of MCF with fiber direction perpendicular to the tusk axis wraps the mid-dentin region, where the MCF are oriented mainly along the tusk axis and arranged in a plywood-like structure with fiber orientations oscillating in a narrow angular range. This particular oscillating-plywood structure of the MCF and the birefringent properties of the collagen fibers, likely contribute to the emergence of the Schreger pattern, one of the most intriguing macroscopic optical patterns observed in mineralized tissues and of great importance for authentication issues in archeology and forensic sciences.

STATEMENT OF SIGNIFICANCE

Elephant tusks are intriguing biological materials as they are composed of dentin (ivory) like teeth but have mineralized collagen fibers (MCF) similarly arranged to the ones of lamellar bones and function as bones or antlers. Here, we showed that ivory has a graded structure with varying MCF orientations and that MCF of the mid-dentin are arranged in plywood like layers with fiber orientations oscillating in a narrow angular range around the tusk axis. This organization of the MCF may contribute to ivory's mechanical properties and, together with the collagen fibers birefringence properties, strongly relates to its optical properties, i.e. the emergence of a macroscopic checkerboard pattern, well known as the Schreger pattern.

Clinical hip fracture is accompanied by compression induced failure in the superior cortex of the femoral neck

Hip fractures pose a major health problem throughout the world due to their devastating impact. Current theories for why these injuries are so prevalent in the elderly point to an increased propensity to fall and decreases in bone mass with ageing. However, the fracture mechanisms, particularly the stress and strain conditions leading to bone failure at the hip remain unclear. Here, we directly examined the cortical bone from clinical intra-capsular hip fractures at a microscopic level, and found strong evidence of compression induced failure in the superior cortex. A total of 143 sections obtained from 24 femoral neck samples that were retrieved from 24 fracturing patients at surgery were examined using laser scanning confocal microscopy (LSCM) after fluorescein staining. The stained microcracks showed significantly higher density in the superior cortex than in the inferior cortex, indicating a greater magnitude of strain in the superior femoral neck during the failure-associated deformation and fracture process. The predominant stress state for each section was reconstructed based on the unique correlation between the microcrack pattern and the stress state. Specifically, we found clear evidence of longitudinal compression and buckling as the primary failure mechanisms in the superior cortex. These findings demonstrate the importance of microcrack analysis in studying clinical hip fractures, and point to the central role of the superior cortex failure as an important aspect of the failure initiation in clinical intra-capsular hip fractures.

Functionalized biomimetic calcium phosphates for bone tissue repair

The design and development of novel materials for biomineralized tissues is an extremely attractive field of research where calcium phosphates (CaPs)-based materials for biomedical applications play a leading role. The biological performance of these compounds can be enhanced through functionalization with biologically active ions and molecules. This review reports on some important recent achievements in creating functionalized biomimetic CaP materials for applications in the musculoskeletal field. Particular attention is focused on the modifications of these inorganic compounds with bioactive ions, growth factors and drugs, as well as on recent trends in some important CaP applications as biomaterials - namely, as bone cements, coatings of metallic implants and scaffolds for regenerative medicine.

A comparative analysis of microscopic alterations in modern and ancient undecalcified and decalcified dry bones

OBJECTIVES

The present study aims to evaluate the preservation of the microstructure of skeletal remains collected from four different known burial sites (archaeological and contemporary). Histological analysis on undecalcified and decalcified thin sections was performed in order to assess which of the two techniques is more affected by taphonomic insults.

MATERIALS AND METHODS

A histological analysis was performed on both undecalcified and decalcified thin sections of 40 long bones and the degree of diagenetic change was evaluated using transmitted and polarized light microscopy according to the Oxford Histological Index (OHI). In order to test the optical behavior of bone tissue, thin sections were observed by polarized light microscopy and the intensity of birefringence was evaluated.

RESULTS

The more ancient samples are generally characterized by a low OHI (0-1) with extensive microscopic focal destruction; recent samples exhibited a better preservation of bone micromorphology. When comparing undecalcified to decalcified thin sections, the latter showed an amelioration in the conservation of microscopic structure. As regards the birefringence, it was very low in all the undecalcified thin sections, whereas decalcification process seems to improve its visibility.

DISCUSSION

The preservation of the bone microscopic structure appears to be influenced not only by age, but also by the burial context. Undecalcified bones appear to be more affected by taphonomical alterations, probably because of the thickness of the thin sections; on the contrary, decalcified thin sections proved to be able to tackle this issue allowing a better reading of the bone tissue.

Techniques to assess bone ultrastructure organization: orientation and arrangement of mineralized collagen fibrils

Bone's remarkable mechanical properties are a result of its hierarchical structure. The mineralized collagen fibrils, made up of collagen fibrils and crystal platelets, are bone's building blocks at an ultrastructural level. The organization of bone's ultrastructure with respect to the orientation and arrangement of mineralized collagen fibrils has been the matter of numerous studies based on a variety of imaging techniques in the past decades. These techniques either exploit physical principles, such as polarization, diffraction or scattering to examine bone ultrastructure orientation and arrangement, or directly image the fibrils at the sub-micrometre scale. They make use of diverse probes such as visible light, X-rays and electrons at different scales, from centimetres down to nanometres. They allow imaging of bone sections or surfaces in two dimensions or investigating bone tissue truly in three dimensions, in vivo or ex vivo, and sometimes in combination with in situ mechanical experiments. The purpose of this review is to summarize and discuss this broad range of imaging techniques and the different modalities of their use, in order to discuss their advantages and limitations for the assessment of bone ultrastructure organization with respect to the orientation and arrangement of mineralized collagen fibrils.

Effects of the basic multicellular unit and lamellar thickness on osteonal fatigue life

A remodeling cycle sets the size of the osteon and associated lamellae in the basic multicellular unit. Treatments and aging affect these micro-structural features. We previously demonstrated decreased fatigue life with an unexplained mechanism and decreased osteon size in cortical bone treated with high-dose bisphosphonate. Here, three finite element models were examined: type-1: a single osteon, as a homogeneous unit and with heterogeneous lamellae and interlamellae, type-2: a control, interstitial-only tissue and type-3: the osteon with cement line, set within the interstitial tissue. Models were loaded in simulated, sinusoidal bending fatigue. As osteon size was decreased, lamellar number and lamellar thickness were incrementally adjusted for each model. As hypothesized, lamellae within the larger type-1 models attained greater cycles to failure and the addition of an osteon to type-2 models (generating a type-3 model set) yielded increased fatigue life. However, as the osteon size was decreased, the potential for compressive damage nucleation was increased within the lamellae of the osteons versus the interstitium. Also, osteons with fewer, thicker lamellae displayed increased fatigue life. Osteonal microstructure plays a role in damage initiation location, especially when BMU size is smaller. Previous findings by us and others could partially be explained by this further understanding of increased probability for damage nucleation in smaller osteons.

Collagen Fiber Orientation in Primate Long Bones

Studies of variation in orientation of collagen fibers within bone have lead to the proposition that these are preferentially aligned to accommodate different kinds of load, with tension best resisted by fibers aligned longitudinally relative to the load, and compression best resisted by transversely aligned fibers. However, previous studies have often neglected to consider the effect of developmental processes, including constraints on collagen fiber orientation (CFO), particularly in primary bone. Here we use circularly polarized light microscopy to examine patterns of CFO in cross-sections from the midshaft femur, humerus, tibia, radius, and ulna in a range of living primate taxa with varied body sizes, phylogenetic relationships and positional behaviors. We find that a preponderance of longitudinally oriented collagen is characteristic of both periosteal primary and intracortically remodeled bone. Where variation does occur among groups, it is not simply understood via interpretations of mechanical loads, although prioritized adaptations to tension and/or shear are considered. While there is some suggestion that CFO may correlate with body size, this relationship is neither consistent nor easily explicable through consideration of size-related changes in mechanical adaptation. The results of our study indicate that there is no clear relationship between CFO and phylogenetic status. One of the principle factors accounting for the range of variation that does exist is primary tissue type, where slower depositing bone is more likely to comprise a larger proportion of oblique to transverse collagen fibers. Anat Rec, 300:1189-1207, 2017. © 2017 Wiley Periodicals, Inc.

Biomimetic Rotated Lamellar Plywood Motifs by Additive Manufacturing of Metal Alloy Scaffolds for Bone Tissue Engineering

Additive manufacturing presents opportunities to treat bone defects using biomimetic tissue scaffolds. Past investigations have explored modulating scaffold mechanical properties through varying materials and geometric motifs. Herein, we applied the rotated plywood structure of bone tissue to a 3D printed scaffold with the goal of improving mechanical performance compared to an orthogonal mesh design commonly used in tissue scaffold applications. The scaffolds were subjected to uniaxial compression followed by scanning electron microscopy and microcomputer tomography. The uniaxial compression test was characterized through elastic modulus (mean 1.32 GPa biomimetic, 0.196 GPa orthogonal, p < 0.001), ultimate compressive strength (mean 16.546 MPa biomimetic, 6.309 MPa orthogonal design, p < 0.001), and ultimate compressive strain values (4.867% biomimetic, 9.000% orthogonal, p < 0.005). Correlation of microfracture imaging to bulk scaffold mode of failure suggest that utilizing the biomimetic plywood design not only improved mechanical performance, but also reduced asymmetrtic buckling, plastic deformation, and fracture propagation similar to bone tissue.

Ultrastructure Organization of Human Trabeculae Assessed by 3D sSAXS and Relation to Bone Microarchitecture

Although the organization of bone ultrastructure, i.e. the orientation and arrangement of the mineralized collagen fibrils, has been in the focus of research for many years for cortical bone, and many models on the osteonal arrangement have been proposed, limited attention has been paid to trabecular bone ultrastructure. This is surprising because trabeculae play a crucial role for the mechanical strength of several bone sites, including the vertebrae and the femoral head. On this account, we first validated a recently developed method (3D sSAXS or 3D scanning small-angle X-ray scattering) for investigating bone ultrastructure in a quantitative and spatially resolved way, using conventional linearly polarized light microscopy as a gold standard. While both methods are used to analyze thin tissue sections, in contrast to polarized light microscopy, 3D sSAXS has the important advantage that it provides 3D information on the orientation and arrangement of bone ultrastructure. In this first study of its kind, we used 3D sSAXS to investigate the ultrastructural organization of 22 vertebral trabeculae of different alignment, types and sizes, obtained from 4 subjects of different ages. Maps of ultrastructure orientation and arrangement of the trabeculae were retrieved by stacking information from consecutive 20-μm-thick bone sections. The organization of the ultrastructure was analyzed in relation to trabecular microarchitecture obtained from computed tomography and to relevant parameters such as distance to trabecular surface, local curvature or local bone mineralization. We found that (i) ultrastructure organization is similar for all investigated trabeculae independent of their particular characteristics, (ii) bone ultrastructure exhibiting a high degree of orientation was arranged in domains, (iii) highly oriented ultrastructural areas were located closer to the bone surface, (iv) the ultrastructure of the human trabecular bone specimens followed the microarchitecture, being oriented mostly parallel to bone surface, and (v) local surface curvature seems to have an effect on the ultrastructure organization. Further studies that investigate bone ultrastructure orientation and arrangement are needed in order to understand its organization and consequently its relation to bone biology and mechanics.

Non-osteoporotic women with low-trauma fracture present altered birefringence in cortical bone

Areal bone mineral density (BMD) by DXA, although an important index, does not accurately assess risk of fragility fracture. Another bone structural parameter, the orientation of type I collagen, is known to add to risk determination, independently of BMD. Accordingly, we investigated the Haversian systems of transiliac crest biopsies from non-osteoporotic women with low-trauma fractures, matched to healthy women without fracture by age and BMD. We employed circularly polarized light (CPL) microscopy because 1) each of the extinct and bright birefringent signals of CPL corresponds to a specific collagen arrangement; and 2) CPL can employ magnification suitable to provide data, of manageable size, from the whole cortical component of a section of biopsy. Under CPL, the coaxial layers of osteons, called lamellae, appear either birefringent extinct or bright. On a section transverse to the Haversian system, the extinct lamella comprises mainly collagen forming small angles, and the bright lamella comprises mainly collagen forming large angles, relative to the general orientation of the Haversian system. We performed semi-automatic morphometry for birefringent and structural parameters for which we computed intra- and inter-observer errors. The statistical analysis used a linear mixed model to compare fracturing and non-fracturing groups while addressing pairing of fracturing and non-fracturing subjects, and linear regression to assess differences between matched subjects. We found significant reduction in 1) lamellar width and area for extinct lamella and bright lamella; 2) percentage of extinct birefringence in osteons, and 3) single osteon area; in the fracturing group; and in lamellar width in the fracturing subject of all pairs. Our results evidence the need to investigate, in a larger sample of subjects, the distribution of collagen orientation as a parameter diagnostic of increased fracture risk.

Altered material properties are responsible for bone fragility in rats with chronic kidney injury

Chronic kidney disease (CKD) is associated with an increased risk of fragility fractures, but the underlying pathophysiological mechanism remains obscure. We performed an in vivo experimental study to examine the roles of uremia and abnormal mineral/parathyroid metabolism in the development of bone metabolic abnormalities in uremic rats. Male Sprague-Dawley rats were divided into four groups, comprising sham operation (high turnover bone control=HTB-Cont), 5/6-nephrectomy (high turnover bone nephrectomized=HTB-Nx), thyroparathyroidectomy (low turnover bone control=LTB-Cont), and thyroparathyroidectomy plus 5/6 nephrectomy (low turnover bone nephrectomized=LTB-Nx), and maintained for 16 weeks. Uremia was successfully created in the LTB-Nx and HTB-Nx groups, while hyperparathyroidism was only found in the HTB-Nx group. Cancellous bone histomorphometry revealed significantly higher bone turnover in the HTB-Nx group than in the LTB-Nx group. Storage modulus at 1 Hz and tan delta in cortical bone of the femur, which represent the viscoelastic mechanical properties, were significantly lower in both Nx groups than in the Cont groups regardless of bone metabolism. Pentosidine-to-matrix ratio was increased and crystallinity was decreased in both Nx groups regardless of bone turnover. Mineral-to-matrix ratio was significantly decreased in the HTB-Nx group, but increased in the LTB-Nx group. Enzymatic collagen crosslinks were decreased in the HTB-Nx group. The degree of orientation of the c-axis in carbonated hydroxyapatite (biological apatite=BAp) crystallites was decreased in both Nx groups regardless of bone metabolism. Stepwise multivariate regression revealed that pentosodine-to-matrix ratio and BAp preferential c-axis orientation were significantly associated with storage modulus and tan delta. In conclusion, bone elastic mechanical properties deteriorated regardless of bone metabolism or bone mass in rats with chronic kidney injury. Various changes in bone mineral properties were associated with CKD, including abnormal parathyroid function, impaired bone turnover, and uremia associated with the accumulation of uremic toxins, were responsible for these changes. Pentosidine-to-matrix ratio and BAp orientation at position 5 were the two meaningful determinants of elastic bone mechanical strength, and both factors were associated with the severity of uremia, but not parathyroid function or bone metabolism. These two factors may account for the increased bone fragility among CKD patients.

The fracture mechanics of human bone: influence of disease and treatment

Aging and bone diseases are associated with increased fracture risk. It is therefore pertinent to seek an understanding of the origins of such disease-related deterioration in bone's mechanical properties. The mechanical integrity of bone derives from its hierarchical structure, which in healthy tissue is able to resist complex physiological loading patterns and tolerate damage. Indeed, the mechanisms through which bone derives its mechanical properties make fracture mechanics an ideal framework to study bone's mechanical resistance, where crack-growth resistance curves give a measure of the intrinsic resistance to the initiation of cracks and the extrinsic resistance to the growth of cracks. Recent research on healthy cortical bone has demonstrated how this hierarchical structure can develop intrinsic toughness at the collagen fibril scale mainly through sliding and sacrificial bonding mechanisms that promote plasticity. Furthermore, the bone-matrix structure develops extrinsic toughness at much larger micrometer length-scales, where the structural features are large enough to resist crack growth through crack-tip shielding mechanisms. Although healthy bone tissue can generally resist physiological loading environments, certain conditions such as aging and disease can significantly increase fracture risk. In simple terms, the reduced mechanical integrity originates from alterations to the hierarchical structure. Here, we review how human cortical bone resists fracture in healthy bone and how changes to the bone structure due to aging, osteoporosis, vitamin D deficiency and Paget's disease can affect the mechanical integrity of bone tissue.

The Mineral-Collagen Interface in Bone

The interface between collagen and the mineral reinforcement phase, carbonated hydroxyapatite (cAp), is essential for bone's remarkable functionality as a biological composite material. The very small dimensions of the cAp phase and the disparate natures of the reinforcement and matrix are essential to the material's performance but also complicate study of this interface. This article summarizes what is known about the cAp-collagen interface in bone and begins with descriptions of the matrix and reinforcement roles in composites, of the phases bounding the interface, of growth of cAp growing within the collagen matrix, and of the effect of intra- and extrafibrilar mineral on determinations of interfacial properties. Different observed interfacial interactions with cAp (collagen, water, non-collagenous proteins) are reviewed; experimental results on interface interactions during loading are reported as are their influence on macroscopic mechanical properties; conclusions of numerical modeling of interfacial interactions are also presented. The data suggest interfacial interlocking (bending of collagen molecules around cAp nanoplatelets) and water-mediated bonding between collagen and cAp are essential to load transfer. The review concludes with descriptions of areas where new research is needed to improve understanding of how the interface functions.

Shear deformation and fracture of human cortical bone

Bone can be viewed as a nano-fibrous composite with complex hierarchical structures. Its deformation and fracture behaviors depend on both the local structure and the type of stress applied. In contrast to the extensive studies on bone fracture under compression and tension, there is a lack of knowledge on the fracture process under shear, a stress state often exists in hip fracture. This study investigated the mechanical behavior of human cortical bone under shear, with the focus on the relation between the fracture pattern and the microstructure. Iosipescu shear tests were performed on notched rectangular bar specimens made from human cortical bone. They were prepared at different angles (i.e. 0°, 30°, 60° and 90°) with respect to the long axis of the femoral shaft. The results showed that human cortical bone behaved as an anisotropic material under shear with the highest shear strength (~50MPa) obtained when shearing perpendicular to the Haversian systems or secondary osteons. Digital image correlation (DIC) analysis found that shear strain concentration bands had a close association with long bone axis with an average deviation of 11.8° to 18.5°. The fracture pattern was also greatly affected by the structure with the crack path generally following the direction of the long axes of osteons. More importantly, we observed unique peripheral arc-shaped microcracks within osteons, using laser scanning confocal microscopy (LSCM). They were generally long cracks that developed within a lamella without crossing the boundaries. This microcracking pattern clearly differed from that created under either compressive or tensile stress: these arc-shaped microcracks tended to be located away from the Haversian canals in early-stage damaged osteons, with ~70% developing in the outer third osteonal wall. Further study by second harmonic generation (SHG) and two-photon excitation fluorescence (TPEF) microscopy revealed a strong influence of the organization of collagen fibrils on shear microcracking. This study concluded that shear-induced microcracking of human cortical bone follows a unique pattern that is governed by the lamellar structure of the osteons.

Modifications to nano- and microstructural quality and the effects on mechanical integrity in Paget's disease of bone

Paget's disease of bone (PDB) is the second most common bone disease mostly developing after 50 years of age at one or more localized skeletal sites; it is associated with severely high bone turnover, bone enlargement, bowing/deformity, cracking, and pain. Here, to specifically address the origins of the deteriorated mechanical integrity, we use a cohort of control and PDB human biopsies to investigate multiscale architectural and compositional modifications to the bone structure (ie, bone quality) and relate these changes to mechanical property measurements to provide further insight into the clinical manifestations (ie, deformities and bowing) and fracture risk caused by PDB. Here, at the level of the collagen and mineral (ie, nanometer-length scale), we find a 19% lower mineral content and lower carbonate-to-phosphate ratio in PDB, which accounts for the 14% lower stiffness and 19% lower hardness promoting plastic deformation in pathological bone. At the microstructural scale, trabecular regions are known to become densified, whereas cortical bone loses its characteristic parallel-aligned osteonal pattern, which is replaced with a mosaic of lamellar and woven bone. Although we find this loss of anisotropic alignment produces a straighter crack path in mechanically-loaded PDB cases, cortical fracture toughness appears to be maintained due to increased plastic deformation. Clearly, the altered quality of the bone structure in PDB affects the mechanical integrity leading to complications such as bowing, deformities, and stable cracks called fissure fractures associated with this disease. Although the lower mineralization and loss of aligned Haversian structures do produce a lower modulus tissue, which is susceptible to deformities, our results indicate that the higher levels of plasticity may compensate for the lost microstructural features and maintain the resistance to crack growth.

Bone hierarchical structure in three dimensions

Bone is a complex hierarchically structured family of materials that includes a network of cells and their interconnected cell processes. New insights into the 3-D structure of various bone materials (mainly rat and human lamellar bone and minipig fibrolamellar bone) were obtained using a focused ion beam electron microscope and the serial surface view method. These studies revealed the presence of two different materials, the major material being the well-known ordered arrays of mineralized collagen fibrils and associated macromolecules, and the minor component being a relatively disordered material composed of individual collagen fibrils with no preferred orientation, with crystals inside and possibly between fibrils, and extensive ground mass. Significantly, the canaliculi and their cell processes are confined within the disordered material. Here we present a new hierarchical scheme for several bone tissue types that incorporates these two materials. The new scheme updates the hierarchical scheme presented by Weiner and Wagner (1998). We discuss the structures at different hierarchical levels with the aim of obtaining further insights into structure-function-related questions, as well as defining some remaining unanswered questions.

Three-dimensional structure of human lamellar bone: the presence of two different materials and new insights into the hierarchical organization

Lamellar bone is the most common bone type in humans. The predominant components of individual lamellae are plywood-like arrays of mineralized collagen fibrils aligned in different directions. Using a dual-beam electron microscope and the Serial Surface View (SSV) method we previously identified a small, but significantly different layer in rat lamellar bone, namely a disordered layer with collagen fibrils showing little or no preferred orientation. Here we present a 3D structural analysis of 12 SSV volumes (25 complete lamellae) from femora of 3 differently aged human individuals. We identify the ordered and disordered motifs in human bone as in the rat, with several significant differences. The ordered motif shows two major preferred orientations, perpendicular to the long axis of the bone, and aligned within 10-20° of the long axis, as well as fanning arrays. At a higher organizational level, arrays of ordered collagen fibrils are organized into 'rods' around 2 to 3μm in diameter, and the long axes of these 'rods' are parallel to the lamellar boundaries. Human bone also contains a disordered component that envelopes the rods and fills in the spaces between them. The disordered motif is especially well-defined between adjacent layers of rods. The disordered motif and its interfibrillar substance stain heavily with osmium tetroxide and Alcian blue indicating the presence of another organic component in addition to collagen. The canalicular network is confined to the disordered material, along with voids and individual collagen fibrils, some of which are also aligned more or less perpendicular to the lamellar boundaries. The organization of the ordered fibril arrays into rods enveloped in the continuous disordered structure was not observed in rat lamellar bone. We thus conclude that human lamellar bone is comprised of two distinct materials, an ordered material and a disordered material, and contains an additional hierarchical level of organization composed of arrays of ordered collagen fibrils, referred to as rods. This new structural information on human lamellar bone will improve our understanding of structure-mechanical function relations, mechanisms of mechano-sensing and the characterizations of bone pathologies.

Investigation of the three-dimensional orientation of mineralized collagen fibrils in human lamellar bone using synchrotron X-ray phase nano-tomography

We investigate the three-dimensional (3-D) organization of mineralized collagen fibrils in human cortical bone based on synchrotron X-ray phase nano-tomography images. In lamellar bone the collagen fibrils are assumed to have a plywood-like arrangement, but due to experimental limitations the 3-D fibril structure has only been deduced from section surfaces so far and the findings have been controversial. Breakthroughs in synchrotron tomographic imaging have given access to direct 3-D information on the bone structure at the nanoscale level. Using an autocorrelation-based orientation measure we confirm that the fibrils are unidirectional in quasi-planes of sub-lamellae and find two specific dominant patterns, oscillating and twisted plywoods coexisting in a single osteon. Both patterns exhibit smooth orientation changes between adjacent quasi-planes. Moreover, we find that the periodic changes in collagen fibril orientation are independent of fluctuations in local mass density. These data improve our understanding of the lamellar arrangement in bone and allow more detailed investigations of structure-function relationships at this scale, providing templates for bio-inspired materials. The presented methodology can be applied to non-destructive 3-D characterization of the sub-micron scale structure of other natural and artificial mineralized biomaterials.

Computational and experimental methodology for site-matched investigations of the influence of mineral mass fraction and collagen orientation on the axial indentation modulus of lamellar bone

Relationships between mineralization, collagen orientation and indentation modulus were investigated in bone structural units from the mid-shaft of human femora using a site-matched design. Mineral mass fraction, collagen fibril angle and indentation moduli were measured in registered anatomical sites using backscattered electron imaging, polarized light microscopy and nano-indentation, respectively. Theoretical indentation moduli were calculated with a homogenization model from the quantified mineral densities and mean collagen fibril orientations. The average indentation moduli predicted based on local mineralization and collagen fibers arrangement were not significantly different from the average measured experimentally with nanoindentation (p=0.9). Surprisingly, no substantial correlation of the measured indentation moduli with tissue mineralization and/or collagen fiber arrangement was found. Nano-porosity, micro-damage, collagen cross-links, non-collagenous proteins or other parameters affect the indentation measurements. Additional testing/simulation methods need to be considered to properly understand the variability of indentation moduli, beyond the mineralization and collagen arrangement in bone structural units.

•

Site-matched assessment of nanoindentation modulus, mineral mass fraction and collagen fibers orientation in human cortical bone sections.

•

Comparison of experimental nanoindentation modulus with its computed equivalent based on the site-matched morphological data.

•

While mean experimental and computed nanoindentation moduli match well, their variations exhibit very weak correlations.

•

Considering factors like nano-porosity and damage may be necessary to understand variability of lamellar stiffness of bone structural units.

•

This is not in conflict with the well known anisotropy associated with the rotated plywood model at the sublamellar scale.

Microfibril orientation dominates the microelastic properties of human bone tissue at the lamellar length scale

The elastic properties of bone tissue determine the biomechanical behavior of bone at the organ level. It is now widely accepted that the nanoscale structure of bone plays an important role to determine the elastic properties at the tissue level. Hence, in addition to the mineral density, the structure and organization of the mineral nanoparticles and of the collagen microfibrils appear as potential key factors governing the elasticity. Many studies exist on the role of the organization of collagen microfibril and mineral nanocrystals in strongly remodeled bone. However, there is no direct experimental proof to support the theoretical calculations. Here, we provide such evidence through a novel approach combining several high resolution imaging techniques: scanning acoustic microscopy, quantitative scanning small-Angle X-ray scattering imaging and synchrotron radiation computed microtomography. We find that the periodic modulations of elasticity across osteonal bone are essentially determined by the orientation of the mineral nanoparticles and to a lesser extent only by the particle size and density. Based on the strong correlation between the orientation of the mineral nanoparticles and the collagen molecules, we conclude that the microfibril orientation is the main determinant of the observed undulations of microelastic properties in regions of constant mineralization in osteonal lamellar bone. This multimodal approach could be applied to a much broader range of fibrous biological materials for the purpose of biomimetic technologies.

Three-dimensional imaging of collagen fibril organization in rat circumferential lamellar bone using a dual beam electron microscope reveals ordered and disordered sub-lamellar structures

Lamellar bone is a major component of most mammalian skeletons. A prominent component of individual lamellae are parallel arrays of mineralized type I collagen fibrils, organized in a plywood like motif. Here we use a dual beam microscope and the serial surface view (SSV) method to investigate the three dimensional collagen organization of circumferential lamellar bone from rat tibiae after demineralization and osmium staining. Fast Fourier transform analysis is used to quantitatively identify the mean collagen array orientations and local collagen fibril dispersion. Based on collagen fibril array orientations and variations in fibril dispersion, we identify 3 distinct sub-lamellar structural motifs: a plywood-like fanning sub-lamella, a unidirectional sub-lamella and a disordered sub-lamella. We also show that the disordered sub-lamella is less mineralized than the other sub-lamellae. The hubs and junctions of the canalicular network, which connect radially oriented canaliculi, are intimately associated with the disordered sub-lamella. We also note considerable variations in the proportions of these 3 sub-lamellar structural elements among different lamellae. This new application of Serial Surface View opens the way to quantitatively compare lamellar bone from different sources, and to clarify the 3-dimensional structures of other bone types, as well as other biological structural materials.

In situ mechanical behavior of mineral crystals in human cortical bone under compressive load using synchrotron X-ray scattering techniques

It is of great interest to delineate the effect of orientation distribution of mineral crystals on the bulk mechanical behavior of bone. Using a unique synergistic approach combining a progressive loading scheme and synchrotron X-ray scattering techniques, human cortical bone specimens were tested in compression to examine the in situ mechanical behavior of mineral crystals aligned in different orientations. The orientation distribution was quantitatively estimated by measuring the X-ray diffraction intensity from the (002) plane in mineral crystals. In addition, the average longitudinal (c-axis), transverse (a-axis), and shear strains of the subset of mineral crystals aligned in each orientation were determined by measuring the lattice deformation normal to three distinct crystallographic planes (i.e. 002, 310, and 213) in the crystals. The experimental results indicated that the in situ strain and stress of mineral crystals varied with orientations. The normal strain and stress in the longitudinally aligned mineral crystals were markedly greater than those in the transversely oriented crystals, whereas the shear stress reached a maximum for the crystals aligned in ±30° with respect to the loading direction. The maximum principal strain and stress were observed in the mineral crystals oriented along the loading axis, with a similar trend observed in the maximum shear strain and stress. By examining the in situ behavior, the contribution of mineral crystals to load bearing and the bulk behavior of bone are discussed.

Quantitative second-harmonic generation microscopy for imaging porcine cortical bone: comparison to SEM and its potential to investigate age-related changes

We propose the use of second-harmonic generation (SHG) microscopy for imaging collagen fibers in porcine femoral cortical bone. The technique is compared with scanning electron microscopy (SEM). SHG microscopy is shown to have excellent potential for bone imaging primarily due its intrinsic specificity to collagen fibers, which results in high contrast images without the need for specimen staining. Furthermore, this technique's ability to quantitatively assess collagen fiber organization is evaluated through an exploratory examination of bone structure as a function of age, from very young to mature bone. In particular, four different age groups: 1 month, 3.5 months, 6 months, and 30 months, were studied. Specifically, we employ the recently developed Fourier transform-second harmonic generation (FT-SHG) imaging technique for the quantification of the structural changes, and observe that as the bone develops, there is an overall reduction in porosity, the number of osteons increases, and the collagen fibers become comparatively more organized. It is also observed that the variations in structure across the whole cross-section of the bone increase with age. The results of this work show that quantitative SHG microscopy can serve as a valuable tool for evaluating the structural organization of collagen fibers in ex vivo bone studies.

Parathyroid hormone treatment improves the cortical bone microstructure by improving the distribution of type I collagen in postmenopausal women with osteoporosis

Although an important index, the level of bone mineral density (BMD) does not completely describe fracture risk. Another bone structural parameter, the orientation of type I collagen, is known to add to risk determination, independently of BMD, ex vivo. We investigated the Haversian system of transiliac crest biopsies from postmenopausal women before and after treatment with parathyroid hormone (PTH). We used the birefringent signal of circularly polarized light and its underlying collagen arrangements by confocal and electron microscopy, in conjunction with the degree of calcification by high-resolution micro-X-ray. We found that PTH treatment increased the Haversian system area by 11.92 ± 5.82 mm² to 12.76 ± 4.50 mm² (p = 0.04); decreased bright birefringence from 0.45 ± 0.02 to 0.40 ± 0.01 (scale zero to one, p = 0.0005); increased the average percent area of osteons with alternating birefringence from 48.15% ± 10.27% to 66.33% ± 7.73% (p = 0.034); and nonsignificantly decreased the average percent area of semihomogeneous birefringent osteons (8.36% ± 10.63% versus 5.41% ± 9.13%, p = 0.40) and of birefringent bright osteons (4.14% ± 8.90% versus 2.08% ± 3.36%, p = 0.10). Further, lamellar thickness significantly increased from 3.78 ± 0.11 µm to 4.47 ± 0.14 µm (p = 0.0002) for bright lamellae, and from 3.32 ± 0.12 µm to 3.70 ± 0.12 µm (p = 0.045) for extinct lamellae. This increased lamellar thickness altered the distribution of birefringence and therefore the distribution of collagen orientation in the tissue. With PTH treatment, a higher percent area of osteons at the initial degree of calcification was observed, relative to the intermediate-low degree of calcification (57.16% ± 3.08% versus 32.90% ± 3.69%, p = 0.04), with percentage of alternating osteons at initial stages of calcification increasing from 19.75 ± 1.22 to 80.13 ± 6.47, p = 0.001. In conclusion, PTH treatment increases heterogeneity of collagen orientation, a starting point from which to study the reduction in fracture risk when PTH is used to treat osteoporosis.

X-ray diffraction as a promising tool to characterize bone nanocomposites

To understand the characteristics of bone at the tissue level, the structure, organization and mechanical properties of the underlying levels down to the nanoscale as well as their mutual interactions need to be investigated. Such information would help understand changes in the bone properties including stiffness, strength and toughness and provide ways to assess the aged and diseased bones and the development of next generation of bio-inspired materials. X-ray diffraction techniques have gained increased interest in recent years as useful non-destructive tools for investigating the nanostructure of bone. This review provides an overview on the recent progress in this field and briefly introduces the related experimental approach. The application of x-ray diffraction to elucidating the structural and mechanical properties of mineral crystals in bone is reviewed in terms of characterization of in situ strain, residual stress-strain and crystal orientation.

Minerals and aligned collagen fibrils in tilapia fish scales: structural analysis using dark-field and energy-filtered transmission electron microscopy and electron tomography

The mineralized structure of aligned collagen fibrils in a tilapia fish scale was investigated using transmission electron microscopy (TEM) techniques after a thin sample was prepared using aqueous techniques. Electron diffraction and electron energy loss spectroscopy data indicated that a mineralized internal layer consisting of aligned collagen fibrils contains hydroxyapatite crystals. Bright-field imaging, dark-field imaging, and energy-filtered TEM showed that the hydroxyapatite was mainly distributed in the hole zones of the aligned collagen fibrils structure, while needle-like materials composed of calcium compounds including hydroxyapatite existed in the mineralized internal layer. Dark-field imaging and three-dimensional observation using electron tomography revealed that hydroxyapatite and needle-like materials were mainly found in the matrix between the collagen fibrils. It was observed that hydroxyapatite and needle-like materials were preferentially distributed on the surface of the hole zones in the aligned collagen fibrils structure and in the matrix between the collagen fibrils in the mineralized internal layer of the scale.

Age-related changes in the plasticity and toughness of human cortical bone at multiple length scales

The structure of human cortical bone evolves over multiple length scales from its basic constituents of collagen and hydroxyapatite at the nanoscale to osteonal structures at near-millimeter dimensions, which all provide the basis for its mechanical properties. To resist fracture, bone's toughness is derived intrinsically through plasticity (e.g., fibrillar sliding) at structural scales typically below a micrometer and extrinsically (i.e., during crack growth) through mechanisms (e.g., crack deflection/bridging) generated at larger structural scales. Biological factors such as aging lead to a markedly increased fracture risk, which is often associated with an age-related loss in bone mass (bone quantity). However, we find that age-related structural changes can significantly degrade the fracture resistance (bone quality) over multiple length scales. Using in situ small-angle X-ray scattering and wide-angle X-ray diffraction to characterize submicrometer structural changes and synchrotron X-ray computed tomography and in situ fracture-toughness measurements in the scanning electron microscope to characterize effects at micrometer scales, we show how these age-related structural changes at differing size scales degrade both the intrinsic and extrinsic toughness of bone. Specifically, we attribute the loss in toughness to increased nonenzymatic collagen cross-linking, which suppresses plasticity at nanoscale dimensions, and to an increased osteonal density, which limits the potency of crack-bridging mechanisms at micrometer scales. The link between these processes is that the increased stiffness of the cross-linked collagen requires energy to be absorbed by "plastic" deformation at higher structural levels, which occurs by the process of microcracking.

Post-yield nanomechanics of human cortical bone in compression using synchrotron X-ray scattering techniques

The ultrastructural response to applied loads governs the post-yield deformation and failure behavior of bone, and is correlated with bone fragility fractures. Combining a novel progressive loading protocol and synchrotron X-ray scattering techniques, this study investigated the correlation of the local deformation (i.e., internal strains of the mineral and collagen phases) with the bulk mechanical behavior of bone. The results indicated that the internal strains of the longitudinally oriented collagen fibrils and mineral crystals increased almost linearly with respect to the macroscopic strain prior to yielding, but markedly decreased first and then gradually leveled off after yielding. Similar changes were also observed in the applied stress before and after yielding of bone. However, the collagen to mineral strain ratio remained nearly constant throughout the loading process. In addition, the internal strains of longitudinal mineral and collagen phases did not exhibit a linear relationship with either the modulus loss or the plastic deformation of bulk bone tissue. Finally, the time-dependent response of local deformation in the mineral phase was observed after yielding. Based on the results, we speculate that the mineral crystals and collagen fibrils aligned with the loading axis only partially explain the post-yield deformation, suggesting that shear deformation involving obliquely oriented crystals and fibrils (off axis) is dominant mechanism of yielding for human cortical bone in compression.

Elastic anisotropy and off-axis ultrasonic velocity distribution in human cortical bone

Elastic structure in cortical bone is usually simplified as orthotropic or transversely isotropic, which allows estimates of three-dimensional technical constants from ultrasonic and density measurements. These elastic property estimates can then be used to study phenotypic changes in cortical bone structure and function, and to create finite element models of skeletal structures for studies of organismal variation and functional adaptation. This study examines assumptions of orthotropic or transversely isotropic material structure in cortical bone through the investigation of off-axis ultrasonic velocities in the cortical plane in 10 samples each from a human femur, mandible and cranium. Longitudinal ultrasonic velocities were measured twice through each bone sample by rotating the perimeter of each sample in 1 ° angular intervals between two ultrasonic transducers. The data were fit to sine curves f(x)=(A × sin(x + B) + C) and the goodness of fit was examined. All the data from the femur fit closely with the ideal sine curve model, and all three coefficients were similar among specimens, indicating similar elastic properties, anisotropies and orientations of the axes of maximum stiffness. Off-axis ultrasonic velocities in the mandible largely fit the sine curve model, although there were regional variations in the coefficients. Off-axis ultrasonic velocities from the cranial vault conformed to the sine curve model in some regions but not in others, which shows an irregular and complex pattern. We hypothesize that these variations in ultrasonic velocities reflect variations in the underlying bulk microstructure of the cortical bone, especially in the three-dimensional patterns of osteonal orientation and structure. Elastic property estimates made with ultrasonic techniques are likely valid in the femur and mandible; errors in estimates from cranial bone need to be evaluated regionally. Approximate orthotropic structure in bulk cortical bone specimens should be assessed if ultrasound is used to estimate three-dimensional elastic properties.

New method for Raman investigation of the orientation of collagen fibrils and crystallites in the Haversian system of bone

Knowledge of the organization of the components of bone is of primary importance in understanding how this tissue responds to stresses and provides a starting point for the design and development of biomaterials. Bone structure has been the subject of numerous studies. The mineralized fiber arrangement in cortical bone is either a twisted or orthogonal plywood structure. Both mineral models coexist in compact bone. Raman polarized spectroscopy offers definite advantages in the study of biological samples, enabling the simultaneous analysis of mineral and organic components and the determination of molecular orientation through the polarization properties of the Raman scattering. In this study, we used the Raman polarization approach to simultaneously investigate the orientation of collagen fibrils and apatite crystals in human cortical bone. Raman bands ratios were monitored as a function of sample orientation. Specific ratios were chosen--such as nu(3) PO(4)/nu(1) PO(4), amide III (1271 cm(-1))/amide III (1243 cm(-1)), and amide I/amide III (1243 cm(-1))--due to their sensitivity to apatite-crystal and collagen-fibril orientation. Based on this original approach, spatial changes were monitored as a function of distance from the Haversian canal. The results revealed simultaneous tilting in intra-lamellar collagen-fibril and mineral crystal orientations. These results are consistent with a twisted plywood organization in the Haversian bone structure at the lamellar level. But at molecular level, the co-alignment of the collagen fibrils and the apatite crystal is observed in the innermost lamellae and becomes gradually less ordered as the distance from the Haversian canal increases. This work highlights the interest of Raman spectroscopy for the multiscale investigation of bone structure.

Toward the x-ray microdiffraction imaging of bone and tissue-engineered bone

The hierarchical structure of bone makes the X-ray microdiffraction scanning techniques one of the most effective tool to investigate the structural features of this tissue at different length scales: the atomic/nanometer scale of the X-ray scattering signals and the macroscopic scale of the scanned sample area. The potentiality of the microdiffraction approach has been verified also by investigations on tissue-engineered bone substitutes used to repair large hard bone defects. The aim of this review is to present the most representative and recent results obtained through high-resolution scanning microdiffraction techniques studying both natural and tissue-engineered bone. The rapid evolution of the instrumental set-ups and the advanced methods of data analysis are described. Recent examples in which X-ray microbeams were used for imaging quantitative features of natural bone tissue and engineered bone substitutes are presented along with the qualitative and quantitative information extracted from the two-dimensional patterns collected on bone samples and on ex vivo cell seeded bioceramic implants. Thanks to the microdiffraction approach, several aspects of the mechanisms leading to the generation of the new bone, coupled to the scaffold resorption in the tissue-engineered constructs, have been tentatively interpreted. The potential of X-ray microdiffraction as an imaging tool in the field of bone tissue engineering is discussed and the key role of high-spatial resolution, availability of automatic tools (for dealing with the huge amount of experimental data) and advanced analysis techniques is elucidated. Finally, future perspectives in the field are presented.

Quantitative polarized Raman spectroscopy in highly turbid bone tissue

Polarized Raman spectroscopy allows measurement of molecular orientation and composition and is widely used in the study of polymer systems. Here, we extend the technique to the extraction of quantitative orientation information from bone tissue, which is optically thick and highly turbid. We discuss multiple scattering effects in tissue and show that repeated measurements using a series of objectives of differing numerical apertures can be employed to assess the contributions of sample turbidity and depth of field on polarized Raman measurements. A high numerical aperture objective minimizes the systematic errors introduced by multiple scattering. We test and validate the use of polarized Raman spectroscopy using wild-type and genetically modified (oim/oim model of osteogenesis imperfecta) murine bones. Mineral orientation distribution functions show that mineral crystallites are not as well aligned (p<0.05) in oim/oim bones (28+/-3 deg) compared to wild-type bones (22+/-3 deg), in agreement with small-angle X-ray scattering results. In wild-type mice, backbone carbonyl orientation is 76+/-2 deg and in oim/oim mice, it is 72+/-4 deg (p>0.05). We provide evidence that simultaneous quantitative measurements of mineral and collagen orientations on intact bone specimens are possible using polarized Raman spectroscopy.

Interpreting cortical bone adaptation and load history by quantifying osteon morphotypes in circularly polarized light images

Birefringence variations in circularly polarized light (CPL) images of thin plane-parallel sections of cortical bone can be used to quantify regional differences in predominant collagen fiber orientation (CFO). Using CPL images of equine third metacarpals (MC3s), R.B. Martin, V.A. Gibson, S.M. Stover, J.C. Gibeling, and L.V. Griffin. (40) described six secondary osteon variants ('morphotypes') and suggested that differences in their regional prevalence affect fatigue resistance and toughness. They devised a numerical osteon morphotype score (MTS) for quantifying regional differences in osteon morphotypes. We have observed that a modification of this score could significantly improve its use for interpreting load history. We hypothesized that our modified osteon MTS would more accurately reveal differences in osteon MTSs between opposing "tension" and "compression" cortices of diaphyses of habitually bent bones. This was tested using CPL images in transverse sections of calcanei from sheep, deer, and horses, and radii from sheep and horses. Equine MC3s and sheep tibiae were examined as controls because they experience comparatively greater load complexity that, because of increased prevalence of torsion/shear, would not require regional mechanical enhancements provided by different osteon morphotypes. Predominant CFO, which can reliably reflect adaptation for a regionally prevalent strain mode, was quantified as mean gray levels from birefringence of entire images (excluding pore spaces) in anterior, posterior, medial, and lateral cortices. Results showed that, in contrast to the original scoring scheme of Martin et al., the modified scheme revealed significant anterior/posterior differences in osteon MTSs in nearly all "tension/compression" bones (p<0.0001), but not in equine MC3s (p=0.30) and sheep tibiae (p=0.35). Among habitually bent bones, sheep radii were the exception; relatively lower osteon populations and the birefringence of the primary bone contributed to this result. Correlations between osteon MTSs using the scoring scheme of Martin et al. with CFO data from all regions of each bone invariably demonstrated weak-to-moderate negative correlations. This contrasts with typically high positive correlations between modified osteon MTSs and regional CFO. These results show that the modified osteon MTS can be a strong correlate of predominant CFO and of the non-uniform strain distribution produced by habitual bending.

Elastic Anisotropy of Human Cortical Bone Secondary Osteons Measured by Nanoindentation

The identification of anisotropic elastic properties of lamellar bone based on nanoindentation data is an open problem. Therefore, the purpose of this study was to develop a method to estimate the orthotropic elastic constants of human cortical bone secondary osteons using nanoindentation in two orthogonal directions. Since the indentation modulus depends on all elastic constants and, for anisotropic materials, also on the indentation direction, a theoretical model quantifying the indentation modulus from the stiffness tensor of a given material was implemented numerically (Swadener and Pharr, 2001, “Indentation of Elastically Anisotropic Half-Spaces by Cones and Parabolae of Revolution,” Philos. Mag. A, 81(2), pp. 447–466). Nanoindentation was performed on 22 osteons of the distal femoral shaft: A new holding system was designed in order to indent the same osteon in two orthogonal directions. To interpret the experimental results and identify orthotropic elastic constants, an inverse procedure was developed by using a fabric-based elastic model for lamellar bone. The experimental indentation moduli were found to vary with the indentation direction and showed a marked anisotropy. The estimated elastic constants showed different degrees of anisotropy among secondary osteons of the same bone and these degrees of anisotropy were also found to be different than the one of cortical bone at the macroscopic level. Using the log-Euclidean norm, the relative distance between the compliance tensors of the estimated mean osteon and of cortical bone at the macroscopic level was 9.69%: Secondary osteons appeared stiffer in their axial and circumferential material directions, and with a greater bulk modulus than cortical bone, which is attributed to the absence of vascular porosity in osteonal properties. The proposed method is suitable for identification of elastic constants from nanoindentation experiments and could be adapted to other (bio)materials, for which it is possible to describe elastic properties using a fabric-based model.

Orientation of collagen at the osteocyte lacunae in human secondary osteons

This work characterizes an aspect of human bone micro-structure, pertinent to fracture initiation and arrest. It addresses how the orientation of elementary components proximate to osteocyte lacunae influences secondary osteon micro-biomechanics. New data at the perilacunar region concerning orientation of collagen-apatite, and prior data on collagen orientation outside the perilacunar region, are incorporated in a novel simulation of osteons to investigate how orientation relates to strains and stresses during mechanical testing. The perilacunar region was observed by confocal microscopy within single lamellar specimens, isolated from osteons. The specimens were separated by extinct or bright appearance in transverse section under circularly polarizing light. This is because synchrotron diffraction and confocal microscopy had established that each type, away from the perilacunar region, corresponds to specific dominant collagen orientation (extinct lamellae's dominant collagen forming small angles with the original osteon axis, while the bright lamellae's forms larger angles). Morphometry of serial confocal images of each perilacunar region showed collagen orientation generally following the orientation of canaliculi, circumambiently-perpendicular to the lacuna. The lacunae tilted relative to the lamellar walls were more numerous in extinct than in bright lamella. Their apices were less likely in extinct than bright lamella to show collagen following the canalicular orientation. The simulation of osteocyte lacunae in osteons, under tension or compression loading, supports the hypothesis that collagen orientation affects strains and stresses at the equatorial perilacunar region in conjunction with the presence of the lacuna. We further conjecture that collagen orientation diverts propagation of micro-cracks initiating from apices.