The importance of drug delivery systems in tissue engineering

Alginate- and Chitosan-Modified Gelatin Hydrogel Microbeads for Delivery of E. coli Phages

Bacterial infections are among the most significant health problems/concerns worldwide. A very critical concern is the rapidly increasing number of antibiotic-resistant bacteria, which requires much more effective countermeasures. As nature's antibacterial entities, bacteriophages shortly ("phages") are very important alternatives to antibiotics, having many superior features compared with antibiotics. The development of phage-carrying controlled-release formulations is still challenging due to the need to protect their activities in preparation, storage, and use, as well as the need to create more user-friendly forms by considering their application area/site/conditions. Here, we prepared gelatin hydrogel microbeads by a two-step process. Sodium alginate was included for modification within the initial recipes, and these composite microbeads were further coated with chitosan. Their swelling ratio, average diameters, and Zeta potentials were determined, and degradations in HCl were demonstrated. The target bacteria Escherichia coli (E.coli) and its specific phage (T4) were obtained from bacterial culture collections and propagated. Phages were loaded within the microbeads with a simple method. The phage release characteristics were investigated comparatively and were demonstrated here. High release rates were observed from the gelatin microbeads. It was possible to reduce the phage release rate using sodium alginate in the recipe and chitosan coating. Using these gelatin-based microbeads as phage carrier matrices-especially in lyophilized forms-significantly improved the phage stability even at room temperature. It was concluded that phage release from gelatin hydrogel microbeads could be further controlled by alginate and chitosan modifications and that user-friendly lyophilized phage formulations with a much longer shelf life could be produced.

Mending a broken heart by biomimetic 3D printed natural biomaterial-based cardiac patches: a review

Myocardial infarction is one of the major causes of mortality as well as morbidity around the world. Currently available treatment options face a number of drawbacks, hence cardiac tissue engineering, which aims to bioengineer functional cardiac tissue, for application in tissue repair, patient specific drug screening and disease modeling, is being explored as a viable alternative. To achieve this, an appropriate combination of cells, biomimetic scaffolds mimicking the structure and function of the native tissue, and signals, is necessary. Among scaffold fabrication techniques, three-dimensional printing, which is an additive manufacturing technique that enables to translate computer-aided designs into 3D objects, has emerged as a promising technique to develop cardiac patches with a highly defined architecture. As a further step toward the replication of complex tissues, such as cardiac tissue, more recently 3D bioprinting has emerged as a cutting-edge technology to print not only biomaterials, but also multiple cell types simultaneously. In terms of bioinks, biomaterials isolated from natural sources are advantageous, as they can provide exceptional biocompatibility and bioactivity, thus promoting desired cell responses. An ideal biomimetic cardiac patch should incorporate additional functional properties, which can be achieved by means of appropriate functionalization strategies. These are essential to replicate the native tissue, such as the release of biochemical signals, immunomodulatory properties, conductivity, enhanced vascularization and shape memory effects. The aim of the review is to present an overview of the current state of the art regarding the development of biomimetic 3D printed natural biomaterial-based cardiac patches, describing the 3D printing fabrication methods, the natural-biomaterial based bioinks, the functionalization strategies, as well as the in vitro and in vivo applications.

Vascular endothelial growth factor (VEGF) delivery approaches in regenerative medicine

The utilization of growth factors in the process of tissue regeneration has garnered significant interest and has been the subject of extensive research. However, despite the fervent efforts invested in recent clinical trials, a considerable number of these studies have produced outcomes that are deemed unsatisfactory. It is noteworthy that the trials that have yielded the most satisfactory outcomes have exhibited a shared characteristic, namely, the existence of a mechanism for the regulated administration of growth factors. Despite the extensive exploration of drug delivery vehicles and their efficacy in delivering certain growth factors, the development of a reliable predictive approach for the delivery of delicate growth factors like Vascular Endothelial Growth Factor (VEGF) remains elusive. VEGF plays a crucial role in promoting angiogenesis; however, the administration of VEGF demands a meticulous approach as it necessitates precise localization and transportation to a specific target tissue. This process requires prolonged and sustained exposure to a low concentration of VEGF. Inaccurate administration of drugs, either through off-target effects or inadequate delivery, may heighten the risk of adverse reactions and potentially result in tumorigenesis. At present, there is a scarcity of technologies available for the accurate encapsulation of VEGF and its subsequent sustained and controlled release. The objective of this review is to present and assess diverse categories of VEGF administration mechanisms. This paper examines various systems, including polymeric, liposomal, hydrogel, inorganic, polyplexes, and microfluidic, and evaluates the appropriate dosage of VEGF for multiple applications.

Advanced strategies for constructing interfacial tissues of bone and tendon/ligament

Enthesis, the interfacial tissue between a tendon/ligament and bone, exhibits a complex histological transition from soft to hard tissue, which significantly complicates its repair and regeneration after injury. Because traditional surgical treatments for enthesis injury are not satisfactory, tissue engineering has emerged as a strategy for improving treatment success. Rapid advances in enthesis tissue engineering have led to the development of several strategies for promoting enthesis tissue regeneration, including biological scaffolds, cells, growth factors, and biophysical modulation. In this review, we discuss recent advances in enthesis tissue engineering, particularly the use of biological scaffolds, as well as perspectives on the future directions in enthesis tissue engineering.

Bioactive Porous Particles as Biological and Physical Stimuli for Bone Regeneration

Even though bony defects can be recovered to their original condition with full functionality, critical-sized bone injuries continue to be a challenge in clinical fields due to deficiencies in the scaffolding matrix and growth factors at the injury region. In this study, we prepared bone morphogenetic protein-2 (BMP-2)-loaded porous particles as a bioactive bone graft for accelerated bone regeneration. The porous particles with unique leaf-stacked morphology (LSS particles) were fabricated by a simple cooling procedure of hot polycaprolactone (PCL) solution. The unique leaf-stacked structure in the LSS particles provided a large surface area and complex release path for the sufficient immobilization of BMP-2 and sustained release of BMP-2 for 26 days. The LSS was also recognized as a topographical cue for cell adhesion and differentiation. In in vitro cell culture and in vivo animal study using a canine mandible defect model, BMP-2-immobilized LSS particles provided a favorable environment for osteogenic differentiation of stem cells and bone regeneration. In vitro study suggests a dual stimulus of bone mineral-like (leaf-stacked) structure (a physical cue) and continuously supplied BMP-2 (a biological cue) to be the cause of this improved healing outcome. Thus, LSS particles containing BMP-2 can be a promising bioactive grafting material for effective new bone formation.

A Review of Multifunction Smart Nanoparticle based Drug Delivery Systems

Cancer nano-therapeutics are rapidly evolving and are often used to overcome a number of concerns with traditional drug delivery methods, including non-specific drug targeting and distribution, low oral bioavailability, and poor hydrophilicity. Modern nano-based targeting techniques have been developed as a result of advances in nano vehicle engineering and materials science, which may bring people with cancer a new hope. Clinical trials have been authorized for a number of medicinal nanocarriers. Nanocarriers with the best feasible size and surface attributes have been developed to optimize biodistribution and increase blood circulation duration. Nanotherapeutics can carry preloaded active medicine towards cancerous cells by preferentially leveraging the specific physiopathology of malignancies. In contrast to passive targeting, active targeting strategies involving antigens or ligands, developed against specific tumor sites, boost the selectivity of these curative nanovehicles. Another barrier that nanoparticles may resolve or lessen is drug resistance. Multifunctional and complex nanoparticles are currently being explored and are predicted to usher in a new era of nanoparticles that will allow for more individualized and customized cancer therapy. The potential prospects and opportunities of stimuli-triggered nanosystems in therapeutic trials are also explored in this review.

A collagen-AS/εPLL bilayered artificial substitute regulates anti-inflammation and infection for initial inflamed wound healing

Despite the development of advanced tissue engineering substitutes, inflammation is still a significant problem that can arise from inflamed burn injuries, chronic wounds, or microbial diseases. Although topical wound dressing accelerates healing by minimizing or preventing the consequences of skin inflammation, there remains a need for the development of a novel substitute scaffold that can effectively eliminate immoderate inflammation and infection in the initial phase of the healing meachanism. In this study, an artificial skin substitute scaffold fabricated with asiaticoside (AS) and epsilon-poly-L-lysine (εPLL) was prepared. Upon the release of these bioactive compounds, they accelerate wound healing and inhibit any bacterial infection at the wound site. We determined whether AS and εPLL exhibit anti-inflammatory and bactericidal effects through different mechanisms. Collectively, the collagen-AS/εPLL artificial skin substitute could be a significant therapeutic agent for scar-less rapid wound healing (without infection and inflammation) of initially-inflamed full-thickness wounds.

Enhancing esophageal repair with bioactive bilayer mesh containing FGF

We aimed to prepare a bioactive and biodegradable bilayer mesh formed by fibroblast growth factor (FGF) loaded gelatin film layer, and poly ε-caprolactone (PCL) film layer, and to investigate its treatment efficacy on esophageal anastomosis. It is envisaged that the bioactive mesh in in vivo model would improve tissue healing in rats. The full thickness semicircular defects of 0.5 × 0.5 cm² were created in anterior walls of abdominal esophagus. The control group had abdominal esophagus isolated with distal esophageal blunt dissection, and sham group had primary anastomosis. In the test groups, the defects were covered with bilayer polymeric meshes containing FGF (5 μg/2 cm²), or not. All rats were sacrificed for histopathology investigation after 7 or 28 days of operation. The groups are coded as FGF(-)-7th day, FGF(+)-7th day, and FGF(+)-28th day, based on their content and operation day. Highest burst pressures were obtained for FGF(+)-7th day, and FGF(+)-28th day groups (p < 0.005) and decreased inflammation grades were observed. Submucosal and muscular collagen deposition scores were markedly increased in these groups compared to sham and FGF(-)-7th day groups having no FGF (p = 0.002, p = 0.001, respectively). It was proved that FGF loaded bioactive bilayer mesh provided effective repair, reinforcement and tissue healing of esophageal defects.

Chitosan-microencapsulated rhEGF in promoting wound healing

AIMS

Chitosan and epidermal growth factor (EGF) have been shown to improve wound healing. This study investigates the healing effects of a spray solution (NewEpi, JoyCom Bio-Chem Co. Ltd., Taiwan) containing recombinant human EGF (rhEGF) delivered via a newly patented technology-chitosan microencapsulated nanoparticles.

METHODS

On Wistar rats, two full-thickness wounds on the dorsum bilateral of the spine were created. The rats were randomised to the following treatment groups: hydrogel, wet dressing, foam, rhEGF spray and rhEGF spray+foam. Sterile dressings were applied and changed daily. A total of 2μg of rhEGF was administered in two sprays during each dressing change. All animals were euthanised on day 14. Tissue samples were taken from the wound bed, including an area of 2cm surrounding the wound margin for histological evaluations.

RESULTS

Wounds treated with the rhEGF spray achieved the greatest size reduction by day 14 compared with other types of conventional dressings. An overall significant difference in levels of collagen synthesis existed between groups (p<0.01). Pair-wise comparisons showed that the rhEGF spray treatment significantly promoted higher levels of mature Type I collagen than any other conventional dressings (p<0.01), whereas non-rhEGF treatments resulted in higher levels of Type III collagen. The regenerated tissue in rhEGF spray treatment groups was also in alignment with that of normal skin. Epidermis, dermis and hair follicles were easily observed in wounds treated with the rhEGF spray.

CONCLUSION

The major challenge of topical application of rhEGF was overcome by using a new drug delivery technology: chitosan-rhEGF nanoparticles. The positive healing effects observed in this study suggest the therapeutic potentials of this novel rhEGF topical spray solution.

Tendon tissue engineering: Cells, growth factors, scaffolds and production techniques

Tendon injuries are a global health problem that affects millions of people annually. The properties of tendons make their natural rehabilitation a very complex and long-lasting process. Thanks to the development of the fields of biomaterials, bioengineering and cell biology, a new discipline has emerged, tissue engineering. Within this discipline, diverse approaches have been proposed. The obtained results turn out to be promising, as increasingly more complex and natural tendon-like structures are obtained. In this review, the nature of the tendon and the conventional treatments that have been applied so far are underlined. Then, a comparison between the different tendon tissue engineering approaches that have been proposed to date is made, focusing on each of the elements necessary to obtain the structures that allow adequate regeneration of the tendon: growth factors, cells, scaffolds and techniques for scaffold development. The analysis of all these aspects allows understanding, in a global way, the effect that each element used in the regeneration of the tendon has and, thus, clarify the possible future approaches by making new combinations of materials, designs, cells and bioactive molecules to achieve a personalized regeneration of a functional tendon.

A tough act to follow: collagen hydrogel modifications to improve mechanical and growth factor loading capabilities

Collagen hydrogels are among ​the most well-studied platforms for drug delivery and in situ tissue engineering, thanks to their low cost, low immunogenicity, versatility, biocompatibility, and similarity to the natural extracellular matrix (ECM). Despite collagen being largely responsible for the tensile properties of native connective tissues, collagen hydrogels have relatively low mechanical properties in the absence of covalent cross-linking. This is particularly problematic when attempting to regenerate stiffer and stronger native tissues such as bone. Furthermore, in contrast to hydrogels based on ECM proteins such as fibronectin, collagen hydrogels do not have any growth factor (GF)-specific binding sites and often cannot sequester physiological (small) amounts of the protein. GF binding and in situ presentation are properties that can aid significantly in the tissue regeneration process by dictating cell fate without causing adverse effects such as malignant tumorigenic tissue growth. To alleviate these issues, researchers have developed several strategies to increase the mechanical properties of collagen hydrogels using physical or chemical modifications. This can expand the applicability of collagen hydrogels to tissues subject to a continuous load. GF delivery has also been explored, mathematically and experimentally, through the development of direct loading, chemical cross-linking, electrostatic interaction, and other carrier systems. This comprehensive article explores the ways in which these parameters, mechanical properties and GF delivery, have been optimized in collagen hydrogel systems ​and examines their in vitro or in vivo biological effect. This article can, therefore, be a useful tool to streamline future studies in the field, by pointing researchers into the appropriate direction according to their collagen hydrogel design requirements.

Application of Platelet Rich Fibrin in Tissue Engineering: Focus on Bone Regeneration

Bone tissue engineering (BTE) is a strategy for reconstructing bone lesions, which is rapidly developing in response to higher demands for bone repairing. Recently, this method, along with the emergence of functionally graded, biocompatible and biodegradable materials, has been expanded. Moreover, scaffolds with chemical, physical and external patterns have induced bone regeneration. However, the maintenance of healthy bone and its regeneration in the human body needs a series of complex and accurate processes. Hence, many studies have been accompanied for reconstructing bone by using blood-derived biomaterials, especially platelet-rich fabricates. The most important reason for using platelet-rich formulations in bone regeneration is based on releasing growth factors from alpha granules in platelets, which can induce osteogenesis. Moreover, the presence of fibrin nano-fiber structures as a constituent can provide a good substrate for cell attachments. This study attempts to review the history, structure, and biology of platelet-rich fibrin (PRF) as well as in vitro, pre-clinical, and clinical studies on the use of PRF for bone regeneration.

The Effects of Stably Tethered BMP-2 on MC3T3-E1 Preosteoblasts Encapsulated in a PEG Hydrogel

Bone morphogenetic protein-2 (BMP-2) is a clinically used osteoinductive growth factor. With a short half-life and side effects, alternative delivery approaches are needed. This work examines thiolation of BMP-2 for chemical attachment to a poly(ethylene glycol) hydrogel using thiol-norbornene click chemistry. BMP-2 retained bioactivity post-thiolation and was successfully tethered into the hydrogel. To assess tethered BMP-2 on osteogenesis, MC3T3-E1 preosteoblasts were encapsulated in matrix metalloproteinase (MMP)-sensitive hydrogels containing RGD and either no BMP-2, soluble BMP-2 (5 nM), or tethered BMP-2 (40-200 nM) and cultured in a chemically defined medium containing dexamethasone for 7 days. The hydrogel culture supported MC3T3-E1 osteogenesis regardless of BMP-2 presentation, but tethered BMP-2 augmented the osteogenic response, leading to significant increases in osteomarkers, Bglap and Ibsp. The ratio, Ibsp-to-Dmp1, highlighted differences in the extent of differentiation, revealing that without BMP-2, MC3T3-E1 cells showed a higher expression of Dmp1 (low ratio), but an equivalent expression with tethered BMP-2 and more abundant bone sialoprotein. In addition, this work identified that dexamethasone contributed to Ibsp expression but not Bglap or Dmp1 and confirmed that tethered BMP-2 induced the BMP canonical signaling pathway. This work presents an effective method for the modification and incorporation of BMP-2 into hydrogels to enhance osteogenesis.

Combating COVID-19 with tissue engineering: a review

The ongoing COVID-19 pandemic triggered by SARS-CoV-2 emerged from Wuhan, China, firstly in December 2019, as well spread to almost all around the world rapidly. The main reason why this disease spreads so many people in a short time is that the virus could be transmitted from an infected person to another by infected droplets. The new emergence of diseases usually may affect multiple organs; moreover, this disease is such an example. Numerous reported studies focus on acute or chronic organ damage caused by the virus. At this point, tissue engineering (TE) strategies can be used to treat the damages with its interdisciplinary approaches. Tissue engineers could design drug delivery systems, scaffolds, and especially biomaterials for the damaged tissue and organs. In this review, brief information about SARS-CoV-2, COVID-19, and epidemiology of the disease will be given at first. After that, the symptoms, the tissue damages in specific organs, and cytokine effect caused by COVID-19 will be described in detail. Finally, it will be attempted to summarize and suggest the appropriate treatments with suitable biomaterials for the damages via TE approaches. The aim of this review is to serve as a summary of currently available tissue damage treatments after COVID-19.

Rebuilding Tendons: A Concise Review on the Potential of Dermal Fibroblasts

Tendons are vital to joint movement by connecting muscles to bones. Along with an increasing incidence of tendon injuries, tendon disorders can burden the quality of life of patients or the career of athletes. Current treatments involve surgical reconstruction and conservative therapy. Especially in the elderly population, tendon recovery requires lengthy periods and it may result in unsatisfactory outcome. Cell-mediated tendon engineering is a rapidly progressing experimental and pre-clinical field, which holds great potential for an alternative approach to established medical treatments. The selection of an appropriate cell source is critical and remains under investigation. Dermal fibroblasts exhibit multiple similarities to tendon cells, suggesting they may be a promising cell source for tendon engineering. Hence, the purpose of this review article was in brief, to compare tendon to dermis tissues, and summarize in vitro studies on tenogenic differentiation of dermal fibroblasts. Furthermore, analysis of an open source Gene Expression Omnibus (GEO) data repository was carried out, revealing great overlap in the molecular profiles of both cell types. Lastly, a summary of in vivo studies employing dermal fibroblasts in tendon repair as well as pilot clinical studies in this area is included. Altogether, dermal fibroblasts hold therapeutic potential and are attractive cells for rebuilding injured tendons.

Polyelectrolyte Multilayer Capsule (PEMC)-Based Scaffolds for Tissue Engineering

Tissue engineering (TE) is a highly multidisciplinary field that focuses on novel regenerative treatments and seeks to tackle problems relating to tissue growth both in vitro and in vivo. These issues currently involve the replacement and regeneration of defective tissues, as well as drug testing and other related bioapplications. The key approach in TE is to employ artificial structures (scaffolds) to support tissue development; these constructs should be capable of hosting, protecting and releasing bioactives that guide cellular behaviour. A straightforward approach to integrating bioactives into the scaffolds is discussed utilising polyelectrolyte multilayer capsules (PEMCs). Herein, this review illustrates the recent progress in the use of CaCO3 vaterite-templated PEMCs for the fabrication of functional scaffolds for TE applications, including bone TE as one of the main targets of PEMCs. Approaches for PEMC integration into scaffolds is addressed, taking into account the formulation, advantages, and disadvantages of such PEMCs, together with future perspectives of such architectures.

Signaling Molecule-Immobilized Porous Particles with a Leaf-Stacked Structure as a Bioactive Filler System

The ultimate purpose of this study was to develop a bioactive filler system that would allow volume restoration (passive property) and continuous release of signaling molecules to recruit soft tissues (bioactive property) and thus effectively correct facial aging. To achieve this, we prepared porous particles with a leaf-stacked structure throughout the entire particle volume (LSS particles) using a simple heating-cooling technique. LSS particles were loaded with insulin-like growth factor-1 (IGF-1) and vascular endothelial growth factor (VEGF) separately, by immersing the particles in signaling molecule-containing solutions for target tissue recruitment (adipose by IGF-1 and blood vessels by VEGF). IGF-1 and VEGF were continuously released from LSS particles for 28 and 21 days in vitro, respectively, even without additional chemical/physical modifications, because of the unique morphology of the particles. Signaling molecules preserved their bioactivity in vitro (induction of adipogenic and angiogenic differentiation) and in vivo (recruitment of fat and blood vessels) for a sufficient period. Moreover, it was observed that the LSS particles themselves have stable volume retention characteristics in the body. Thus, we suggest that the signaling molecule-loaded LSS particles can function as a bioactive filler system for volume retention and target tissue regeneration.

A 3D porous microsphere with multistage structure and component based on bacterial cellulose and collagen for bone tissue engineering

Collagen (COL) and bacterial cellulose (BC) were chemically recombined by Malaprade and Schiff-base reactions. A three-dimensional (3D) porous microsphere of COL/BC/Bone morphogenetic protein 2 (BMP-2) with multistage structure and components were prepared by the template method combined with reverse-phase suspension regeneration. The microspheres were full of pores and had a rough surface. The particle size ranged from 8 to 12 microns, the specific surface area (S_BET) was 123.4 m²/g, the pore volume (V_Pore) was 0.59 cm³/g, and the average pore diameter (D_BJH) was 198.5 nm. The adsorption isotherm of the microspheres on the N₂ molecule belongs to that of mesoporous materials. The microspheres showed good biocompatibility, and the 3D porous microspheres with multiple structures and components effectively promoted the adhesion, proliferation, and osteogenic differentiation of mice MC3T3-E1 cells. The study can provide a theoretical basis for the application of COL/BC porous microspheres in the field of bone tissue engineering.

Dual growth factor-immobilized bioactive injection material for enhanced treatment of glottal insufficiency

With increasing demand for treatment of glottal insufficiency, several injection materials have been examined. However, biological resorption, degradation of injected materials, and the subsequent need to perform multiple injections still remain major clinical problems. In this study, we fabricated two different growth factor (GF) [single basic fibroblast growth factor (bFGF), single hepatocyte growth factor (HGF), or dual bFGF/HGF]-immobilized polycaprolactone (PCL)/Pluronic F127 microspheres. These materials were investigated for their potential use as bioactive injection laryngoplasty agents. HGF was found to be continuously released over 20 days and the bFGF was found to be continuously released over 25 days, as demonstrated by ELISA assay. Human vocal fold fibroblasts (hVFFs) showed significantly higher proliferative ability on dual GF-immobilized microspheres. GF-immobilized microspheres (bFGF, HGF, and dual GF) were injected into paralyzed vocal folds of New Zealand white rabbits. Through endoscopic observation and H&E staining, we identified that the microspheres remained localized at the injection site, resulting in constant volume augmentation of the paralyzed vocal fold without significant loss of the initial volume after 4 weeks. The expression of genes related to the extracellular matrix (ECM) in the vocal fold was upregulated by dual GF-immobilized microspheres. Furthermore, dual GF-immobilized microspheres inhibited muscle degeneration and upregulation of myogenic-related genes. In conclusion, dual GF-immobilized microspheres passively augmented the volume of the paralyzed vocal fold while actively inducing ECM synthesis at the injected vocal fold and preserving muscle tissue. Dual GF-immobilized microspheres could be a new and promising injection material for paralyzed vocal folds. STATEMENT OF SIGNIFICANCE: Limitation of prolonged augmentation of vocal fold and degeneration of vocal fold tissue still remain as major clinical problems in the treatment of vocal fold paralysis. Herein, we fabricated the polycaprolactone (PCL)/Pluronic F127 microspheres to augment volume of paralyzed vocal folds. On top of that, we additionally immobilized the growth factors (bFGF, HGF, or dual bFGF/HGF) on the surface of these microspheres. We highlight the efficacy of the dual GF-immobilized microspheres which augmented the volume of the paralyzed vocal fold passively, induced ECM synthesis actively at the injected vocal fold and preserved laryngeal muscle tissue. Our results suggest that the dual GF-immobilized microsphere could be a new promising injection material for injection laryngoplasty to treat paralyzed vocal fold.

Stability of lysozyme incorporated into electrospun fibrous mats for wound healing

In this study, we investigated the feasibility of incorporating protein drugs into electrospun fibrous mats (EFMs) for wound healing using lysozyme as a model drug. Lysozyme nanoparticles (Lyso- NPs) were first obtained by electrospray. Lysozyme solutions were prepared with a binary solvent mixture of ethanol (EtOH)-water (H₂O) at varied volume ratios. Subsequently, Lyso-NPs were suspended in poly(lactic-co-glycolic acid) (PLGA) solutions using trifluoroethanol (TFE) as a solvent. Lyso-NPs loaded EFMs were obtained by electrospinning of the aforementioned suspensions, and the bioactivity of lysozyme in the EFMs was investigated using fluorescence-based assay kit. The electrosprayed Lyso-NPs were spherical with barely altered bioactivity as compared to the untreated raw material when using EtOH- H₂O (30:70, v/v) as the solvent. After the subsequent electrospinning process, more than 90% of the bioactivity of lysozyme was retained compared to the raw material. The cytotoxicity of the produced EFMs was evaluated by thiazolyl blue tetrazolium bromide (MTT) study and the proliferation and distribution of mouse fibroblast cells (L929) growing on EFMs were investigated using 4,6-diamidino-2-phenylindol dihydrochloride (DAPI) for nucleic acid staining. Nearly negligible cytotoxicity of all the EFMs was observed according to the MTT study. Furthermore, it was observed that the L929 cells grew well on the Lyso-EFMs, especially those with the modification of polyethylene glycol (PEG) that was added to improve the hydrophilicity of EFMs. This study demonstrated that the electrospray/electrospinning processes are suitable for loading biomacromolecules to produce functionalized wound dressings to promote wound healing.

Drug delivery systems for programmed and on-demand release

With the advancement in medical science and understanding the importance of biodistribution and pharmacokinetics of therapeutic agents, modern drug delivery research strives to utilize novel materials and fabrication technologies for the preparation of robust drug delivery systems to combat acute and chronic diseases. Compared to traditional drug carriers, which could only control the release of the agents in a monotonic manner, the new drug carriers are able to provide a precise control over the release time and the quantity of drug introduced into the patient's body. To achieve this goal, scientists have introduced "programmed" and "on-demand" approaches. The former provides delivery systems with a sophisticated architecture to precisely tune the release rate for a definite time period, while the latter includes systems directly controlled by an operator/practitioner, perhaps with a remote device triggering/affecting the implanted or injected drug carrier. Ideally, such devices can determine flexible release pattern and intensify the efficacy of a therapy via controlling time, duration, dosage, and location of drug release in a predictable, repeatable, and reliable manner. This review sheds light on the past and current techniques available for fabricating and remotely controlling drug delivery systems and addresses the application of new technologies (e.g. 3D printing) in this field.

Sustained Release of BMP-2 from Porous Particles with Leaf-Stacked Structure for Bone Regeneration

Sustained release of bioactive molecules from delivery systems is a common strategy for ensuring their prolonged bioactivity and for minimizing safety issues. However, residual toxic reagents, the use of harsh organic solvents, and complex fabrication procedures in conventional delivery systems are considered enormous impediments toward clinical use. Herein, we describe bone morphogenetic protein-2 (BMP-2)-immobilized porous polycaprolactone particles with unique leaf-stacked structures (LSS particles) prepared using clinically feasible materials and procedures. The BMP-2 immobilized in these LSS particles is continuously released up to 36 days to provide an appropriate environment for osteogenic differentiation of human periosteum-derived cells and new bone formation. Thus, the leaf-stacked structures of these LSS particles provide a simple but clinically applicable platform for effectively delivering a variety of bioactive molecules, such as growth factors, hormones, cytokines, peptides, etc.

[Construction and bioactivity evaluation of hepatocyte growth factor-loaded poly (lactic-co-glycolic acid) nanoparticles]

OBJECTIVE

To explore the optimum conditions for preparing poly(lactic-co-glycolic) acid (PLGA) nanoparticles and evaluate the bioactivity of hepatocyte growth factor (HGF)-loaded PLGA nanoparticles.

METHODS

Bovine serum albumin (BSA)-loaded PLGA nanoparticles were prepared using a double emulsion-solvent evaporation method. The preparation process of nanoparticles was optimized by orthogonal test with the particle size, encapsulation efficiency (EE), drug loading (DD), and recovery as the indexes. HGF-loaded nanoparticles were then prepared under the optimized conditions. The EE, DD and release characteristics of BSA?loaded nanoparticles and HGF-loaded nanoparticles were evaluated using a BCA kit and HGF ELISA kit. The bioactivity of HGF-loaded nanoparticles was evaluated using CCK8 proliferation assay.

RESULTS

The HGF-loaded nanoparticles prepared under the optimized conditions had a uniform size with a mean diameter of 234.4∓4.8 nm, an EE of (77.75∓3.04)% and a recovery rate of (49.33∓9.34)%. The in vitro release curve highlighted an initial burst drug release followed by sustained release from the nanoparticles. HGF-loaded nanoparticles obviously promoted the proliferation of Hacat keratinocytes in vitro.

CONCLUSION

HGF-loaded nanoparticles prepared using double emulsion?solvent evaporation method under optimized conditions possesses a high EE with a good sustained drug release profile and a good bioactivity.

Platelet-derived growth factor-BB-immobilized asymmetrically porous membrane for enhanced rotator cuff tendon healing

Rotator cuff tear is a common musculoskeletal disease that often requires surgical repair. Despite of recent advances in surgical techniques, the re-tear rate of the rotator cuff tendon is very high. In this study, a platelet-derived growth factor-BB (PDGF-BB)-immobilized asymmetrically porous membrane was fabricated to investigate the feasibility for enhancing rotator cuff tendon regeneration through the membrane. PDGF-BB is recognized to promote tendon regeneration. The asymmetrically porous membrane was fabricated by polycaprolactone and Pluronic F127 using an immersion precipitation technique, which can allow selective permeability (preventing scar tissue invasion into defect region but allowing permeation of oxygen/nutrients) and incorporation of bioactive molecules (e.g., PDGF-BB) via heparin binding. The PDGF-BB immobilized on the membrane was released in a sustained manner over 42 days. In an animal study using Sprague-Dawley rats, the PDGF-BB-immobilized membrane group showed significantly greater regeneration of rotator cuff tendon in histological and biomechanical analyses compared with the groups of control (suturing) and membrane without PDGF-BB immobilization. The enhancing regeneration of rotator cuff tendon of the PDGF-BB-immobilized membrane may be caused from the synergistic effect of the asymmetrically porous membrane with unique properties (selective permeability and hydrophilicity) as a scaffold for guided tendon regeneration and PDGF-BB sustainedly released from the membrane.

Growth-Factor Nanocapsules That Enable Tunable Controlled Release for Bone Regeneration

Growth factors are of great potential in regenerative medicine. However, their clinical applications are largely limited by the short in vivo half-lives and the narrow therapeutic window. Thus, a robust controlled release system remains an unmet medical need for growth-factor-based therapies. In this research, a nanoscale controlled release system (degradable protein nanocapsule) is established via in situ polymerization on growth factor. The release rate can be finely tuned by engineering the surface polymer composition. Improved therapeutic outcomes can be achieved with growth factor nanocapsules, as illustrated in spinal cord fusion mediated by bone morphogenetic protein-2 nanocapsules.

Hydrogel-Based Controlled Delivery Systems for Articular Cartilage Repair

Delivery of bioactive factors is a very valuable strategy for articular cartilage repair. Nevertheless, the direct supply of such biomolecules is limited by several factors including rapid degradation, the need for supraphysiological doses, the occurrence of immune and inflammatory responses, and the possibility of dissemination to nontarget sites that may impair their therapeutic action and raise undesired effects. The use of controlled delivery systems has the potential of overcoming these hurdles by promoting the temporal and spatial presentation of such factors in a defined target. Hydrogels are promising materials to develop delivery systems for cartilage repair as they can be easily loaded with bioactive molecules controlling their release only where required. This review exposes the most recent technologies on the design of hydrogels as controlled delivery platforms of bioactive molecules for cartilage repair.

The effect of hydroxyapatite in biopolymer-based scaffolds on release of naproxen sodium

A scaffold capable of controlling drug release is highly desirable for bone tissue engineering. The objective of this study was to develop and characterize a highly porous biodegradable scaffold and evaluate the kinetic release behavior for the application of anti-inflammatory drug delivery. Porous scaffolds consisting of chitosan, poly(acrylic acid), and nano-hydroxyapatite were prepared using the freeze-drying method. The nanocomposite scaffolds were characterized for structure, pore size, porosity, and mechanical properties. The nanocomposite scaffolds were tested and characterized using Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), energy-dispersive analysis of X-ray (EDS), X-ray diffraction (XRD) analysis, and tensile test instrument. The results showed that the pores of the scaffolds were interconnected, and their sizes ranged from 145 µm to 213 μm. The mechanical properties were found close to those of trabecular bone of the same density. The ability of the scaffolds to deliver naproxen sodium as a model drug in vitro was investigated. The release profile of naproxen sodium was measured in a phosphate-buffered saline solution by a ultra-violet spectrophotometer that was controlled by the Fickian diffusion mechanism. These results indicated that the chitosan-graft-poly(acrylic acid)/nano-hydroxyapatite scaffold may be a promising biomedical scaffold for clinical use in bone tissue engineering with a potential for drug delivery. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2992-3003, 2016.

Strategies for the chemical and biological functionalization of scaffolds for cardiac tissue engineering: a review

The development of biomaterials for cardiac tissue engineering (CTE) is challenging, primarily owing to the requirement of achieving a surface with favourable characteristics that enhances cell attachment and maturation. The biomaterial surface plays a crucial role as it forms the interface between the scaffold (or cardiac patch) and the cells. In the field of CTE, synthetic polymers (polyglycerol sebacate, polyethylene glycol, polyglycolic acid, poly-l-lactide, polyvinyl alcohol, polycaprolactone, polyurethanes and poly(N-isopropylacrylamide)) have been proven to exhibit suitable biodegradable and mechanical properties. Despite the fact that they show the required biocompatible behaviour, most synthetic polymers exhibit poor cell attachment capability. These synthetic polymers are mostly hydrophobic and lack cell recognition sites, limiting their application. Therefore, biofunctionalization of these biomaterials to enhance cell attachment and cell material interaction is being widely investigated. There are numerous approaches for functionalizing a material, which can be classified as mechanical, physical, chemical and biological. In this review, recent studies reported in the literature to functionalize scaffolds in the context of CTE, are discussed. Surface, morphological, chemical and biological modifications are introduced and the results of novel promising strategies and techniques are discussed.

Significant improvement of biocompatibility of polypropylene mesh for incisional hernia repair by using poly-ε-caprolactone nanofibers functionalized with thrombocyte-rich solution

Incisional hernia is the most common postoperative complication, affecting up to 20% of patients after abdominal surgery. Insertion of a synthetic surgical mesh has become the standard of care in ventral hernia repair. However, the implementation of a mesh does not reduce the risk of recurrence and the onset of hernia recurrence is only delayed by 2–3 years. Nowadays, more than 100 surgical meshes are available on the market, with polypropylene the most widely used for ventral hernia repair. Nonetheless, the ideal mesh does not exist yet; it still needs to be developed. Polycaprolactone nanofibers appear to be a suitable material for different kinds of cells, including fibroblasts, chondrocytes, and mesenchymal stem cells. The aim of the study reported here was to develop a functionalized scaffold for ventral hernia regeneration. We prepared a novel composite scaffold based on a polypropylene surgical mesh functionalized with poly-ε-caprolactone (PCL) nanofibers and adhered thrombocytes as a natural source of growth factors. In extensive in vitro tests, we proved the biocompatibility of PCL nanofibers with adhered thrombocytes deposited on a polypropylene mesh. Compared with polypropylene mesh alone, this composite scaffold provided better adhesion, growth, metabolic activity, proliferation, and viability of mouse fibroblasts in all tests and was even better than a polypropylene mesh functionalized with PCL nanofibers. The gradual release of growth factors from biocompatible nanofiber-modified scaffolds seems to be a promising approach in tissue engineering and regenerative medicine.

The past, present and future in scaffold-based tendon treatments

Tendon injuries represent a significant clinical burden on healthcare systems worldwide. As the human population ages and the life expectancy increases, tendon injuries will become more prevalent, especially among young individuals with long life ahead of them. Advancements in engineering, chemistry and biology have made available an array of three-dimensional scaffold-based intervention strategies, natural or synthetic in origin. Further, functionalisation strategies, based on biophysical, biochemical and biological cues, offer control over cellular functions; localisation and sustained release of therapeutics/biologics; and the ability to positively interact with the host to promote repair and regeneration. Herein, we critically discuss current therapies and emerging technologies that aim to transform tendon treatments in the years to come.

Dual growth factor-immobilized microspheres for tissue reinnervation: in vitro and preliminary in vivo studies

Growth factors (GFs) (basic fibroblast growth factor (bFGF) and/or nerve growth factor (NGF))-immobilized polycaprolactone (PCL)/Pluronic F127 microspheres were prepared using an isolated particulate-melting method and the sequential binding of heparin and GFs onto the microspheres. The GFs immobilized on the microspheres were released in a sustained manner over 28 days, regardless of GF type. From the in vitro culture of muscle-derived stem cells, it was observed that the NGF-immobilized microspheres induced more neurogenic differentiation than the bFGF-immobilized microspheres, as evidenced by a quantitative real-time polymerase chain reaction using specific neurogenic markers (Nestin, GFAP, β-tubulin, and MAP2) and Western blot (Nestin and β-tubulin) analyses. The dual bFGF/NGF-immobilized microspheres showed better neurogenic differentiation than the microspheres immobilized with single bFGF or NGF. From the preliminary animal study, the dual bFGF/NGF-immobilized microsphere group also showed effective nerve regeneration, as evaluated by immunocytochemistry using a marker - β-tubulin. The dual bFGF/NGF-immobilized PCL/Pluronic F127 microspheres may be a promising candidate for nerve regeneration in certain target tissues (i.e. muscles) leading to sufficient reinnervation.

Incorporation of a prolyl hydroxylase inhibitor into scaffolds: a strategy for stimulating vascularization

Clinical applications of tissue engineering are constrained by the ability of the implanted construct to invoke vascularization in adequate extent and velocity. To overcome the current limitations presented by local delivery of single angiogenic factors, we explored the incorporation of prolyl hydroxylase inhibitors (PHIs) into scaffolds as an alternative vascularization strategy. PHIs are small molecule drugs that can stabilize the alpha subunit of hypoxia-inducible factor-1 (HIF-1), a key transcription factor that regulates a variety of angiogenic mechanisms. In this study, we conjugated the PHI pyridine-2,4-dicarboxylic acid (PDCA) through amide bonds to a gelatin sponge (Gelfoam(®)). Fibroblasts cultured on PDCA-Gelfoam were able to infiltrate and proliferate in these scaffolds while secreting significantly more vascular endothelial growth factor than cells grown on Gelfoam without PDCA. Reporter cells expressing green fluorescent protein-tagged HIF-1α exhibited dose-dependent stabilization of this angiogenic transcription factor when growing within PDCA-Gelfoam constructs. Subsequently, we implanted PDCA-Gelfoam scaffolds into the perirenal fat tissue of Sprague Dawley rats for 8 days. Immunostaining of explants revealed that the PDCA-Gelfoam scaffolds were amply infiltrated by cells and promoted vascular ingrowth in a dose-dependent manner. Thus, the incorporation of PHIs into scaffolds appears to be a feasible strategy for improving vascularization in regenerative medicine applications.

Bone substitutes in orthopaedic surgery: from basic science to clinical practice

Bone substitutes are being increasingly used in surgery as over two millions bone grafting procedures are performed worldwide per year. Autografts still represent the gold standard for bone substitution, though the morbidity and the inherent limited availability are the main limitations. Allografts, i.e. banked bone, are osteoconductive and weakly osteoinductive, though there are still concerns about the residual infective risks, costs and donor availability issues. As an alternative, xenograft substitutes are cheap, but their use provided contrasting results, so far. Ceramic-based synthetic bone substitutes are alternatively based on hydroxyapatite (HA) and tricalcium phosphates, and are widely used in the clinical practice. Indeed, despite being completely resorbable and weaker than cortical bone, they have exhaustively proved to be effective. Biomimetic HAs are the evolution of traditional HA and contains ions (carbonates, Si, Sr, Fl, Mg) that mimic natural HA (biomimetic HA). Injectable cements represent another evolution, enabling mininvasive techniques. Bone morphogenetic proteins (namely BMP2 and 7) are the only bone inducing growth factors approved for human use in spine surgery and for the treatment of tibial nonunion. Demineralized bone matrix and platelet rich plasma did not prove to be effective and their use as bone substitutes remains controversial. Experimental cell-based approaches are considered the best suitable emerging strategies in several regenerative medicine application, including bone regeneration. In some cases, cells have been used as bioactive vehicles delivering osteoinductive genes locally to achieve bone regeneration. In particular, mesenchymal stem cells have been widely exploited for this purpose, being multipotent cells capable of efficient osteogenic potential. Here we intend to review and update the alternative available techniques used for bone fusion, along with some hints on the advancements achieved through the experimental research in this field.

Mechanical properties and dual drug delivery application of poly(lactic-co-glycolic acid) scaffolds fabricated with a poly(β-amino ester) porogen

Polymeric scaffolds that are biocompatible and biodegradable are widely used for tissue engineering applications. Scaffolds can be further enhanced by enabling the release of one or more drugs to stimulate regeneration or for the treatment of a specific disease or condition. In this study, poly(lactic-co-glycolic acid) (PLGA) microspheres were mixed with poly(β-amino ester) (PBAE) particles to create novel hybrid scaffolds capable of dual release of drug and growth factor. Fast-degrading PBAE particles loaded with the drug ketoprofen acted as porogens that provided a rapid 12h release. The PLGA microspheres were loaded with a growth factor, bone morphogenetic protein 2, and fused together around the porogens to create a slow-degrading matrix that provided sustained release lasting 70days. Drug release was further tailored by varying the amount of porogen added to the scaffold. Bioactivity measurements demonstrated that the scaffold fabrication technique did not damage the drug or protein. The compressive modulus was affected by the amount of porogen added, extending from 50 to 111MPa for loadings from 60 to 40% PBAE, and after 5days of degradation, it decreased to 0.6 to 1.1kPa when the porogen was gone. PLGA containing a quick-degrading porogen can be used to release two drugs while developing a porous microarchitecture for cell ingrowth with in a matrix capable of maintaining a compressive modulus applicable for soft tissue implants.

Porous membrane with reverse gradients of PDGF-BB and BMP-2 for tendon-to-bone repair: in vitro evaluation on adipose-derived stem cell differentiation

Polycaprolactone (PCL)/Pluronic F127 membrane with reverse gradients of dual platelet-derived growth factor-β (PDGF-BB) and bone morphogenetic protein 2 (BMP-2) concentrations was fabricated using a diffusion method to investigate the effect of reverse gradients of dual growth factor concentrations on adipose-derived stem cell (ASC) differentiations, such as tenogenesis and osteogenesis. The PDGF-BB and BMP-2 were continuously released from the membrane for up to 35 days, with reversely increasing/decreasing growth factors along the membrane length. Human ASCs were seeded on the membrane with reverse PDGF-BB and BMP-2 gradients. The cells were confluent after 1 week of culture, regardless of growth factor types or concentrations on the membrane. Gene expression (real-time polymerase chain reaction), Western blot and immunohistological analyses after 1 and 2 weeks of ASC culture showed that the membrane sections with higher PDGF-BB and lower BMP-2 concentrations provided a better environment for ASC tenogenesis, while the membrane sections with higher BMP-2 and lower PDGF-BB concentrations were better for promoting osteogenesis. The results suggest that the membrane with reverse gradients of PDGF-BB and BMP-2 may be promising for tendon-to-bone repair, as most essential biological processes are mediated by gradients of biological molecules in the body.

Growth factor-delivery systems for tissue engineering: a materials perspective

The transplantation of organs, their surgical reconstruction or implantation of synthetic devices that can perform the function of organs, are the currently available methods for treating loss of tissue/organs in humans. However, the limitations associated with these techniques have led to the development of tissue engineering. One of the primary goals of tissue engineering is to provide growth factor delivery systems that can induce desired cell responses both in vitro and in vivo, in order to cause accelerated tissue regeneration. To make growth factors a more therapeutically viable alternative for the treatment of chronic degenerative diseases, a wide range of natural and synthetic materials have been employed as vehicles for their controlled delivery. The choice of material and design of the carrier device influence the mode of immobilization of growth factors on the scaffolds and their local/systemic administration. From a tissue engineer's perspective, materials could be used for designing scaffolds as well as for delivering single or multiple growth factors. Therefore, this review discusses growth factor delivery systems, with particular reference to carrier-based growth factor delivery systems with a focus on materials.

Transforming growth factor Beta-releasing scaffolds for cartilage tissue engineering

The maintenance of a critical threshold concentration of transforming growth factor beta (TGF-β) for a given period of time is crucial for the onset and maintenance of chondrogenesis. Thus, the development of scaffolds that provide temporal and/or spatial control of TGF-β bioavailability has appeal as a mechanism to induce the chondrogenesis of stem cells in vitro and in vivo for articular cartilage repair. In the past decade, many types of scaffolds have been designed to advance this goal: hydrogels based on polysaccharides, hyaluronic acid, and alginate; protein-based hydrogels such as fibrin, gelatin, and collagens; biopolymeric gels and synthetic polymers; and solid and hybrid composite (hydrogel/solid) scaffolds. In this study, we review the progress in developing strategies to deliver TGF-β from scaffolds with the aim of enhancing chondrogenesis. In the future, such scaffolds could prove critical for tissue engineering cartilage, both in vitro and in vivo.

Advances in drug delivery via electrospun and electrosprayed nanomaterials

Electrohydrodynamic (EHD) techniques refer to procedures that utilize electrostatic forces to fabricate fibers or particles of different shapes with sizes in the nano-range to a few microns through electrically charged fluid jet. Employing different techniques, such as blending, surface modification, and coaxial process, there is a great possibility of incorporating bioactive such molecules as drugs, DNA, and growth factors into the nanostructures fabricated via EHD techniques. By careful selection of materials and processing conditions, desired encapsulation efficiency as well as preserved bioactivity of the therapeutic agents can be achieved. The drug-loaded nanostructures produced can be applied via different routes, such as implantation, injection, and topical or oral administration for a wide range of disease treatment. Taking advantage of the recent developments in EHD techniques like the coaxial process or multilayered structures, individually controlled delivery of multiple drugs is achievable, which is of great demand in cancer therapy and growth-factor delivery. This review summarizes the most recent techniques and postmodification methods to fabricate electrospun nanofibers and electrosprayed particles for drug-delivery applications.

Bone morphogenetic proteins-immobilized polydioxanone porous particles as an artificial bone graft

Bone morphogenetic proteins (BMPs)-immobilized polydioxanone (PDO)/Pluronic F127 porous particles were prepared as a bone graft using a melt-molding particulate-leaching method, and the sequential binding of heparin and BMPs (BMP-2 and BMP-7, single or dual) onto the porous particles. The prepared PDO/Pluronic F127 porous particles gradually degraded with time, with ∼30% of the initial particle weight remaining after 16 weeks. The degradation rate of the PDO/Pluronic F127 porous particles may parallel the bone-healing rate. The BMPs were easily immobilized onto the pore surfaces of PDO/Pluronic F127 particles via heparin binding and were released in a sustained manner for up to 21 days, regardless of BMP type. The BMPs (single BMP-2 or dual BMP-2/BMP-7)-immobilized porous particles were effective for in vitro osteogenesis of bone marrow stem cells (BMSCs), as analyzed by alkaline phosphatase activity, calcium content, time polymerase chain reaction using specific markers for osteogenesis (Type I collagen, osteocalcin, osteopotin, and RunX2), and immunohistochemical staining. The BMPs (single BMP-2 or dual BMP-2/BMP-7)-immobilized porous particles were also effective in promoting new bone formation, as analyzed by the preliminary animal study using a full-thickness skull defect model of Sprague-Dawley rats (microcomputed tomography). The synergistic effect of dual BMPs on the osteogenesis of BMSCs and bone regeneration was not significant in our system. The BMP-2 or dual BMPs (BMP-2/BMP-7)-immobilized PDO/Pluronic F127 porous particles may be a promising candidate as a bone graft for the delayed and insufficient bone healing in clinical fields.