Transition metal-nitrogen sites for electrochemical carbon dioxide reduction reaction

Enhancing effect of cobalt phthalocyanine dispersion on electrocatalytic reduction of CO2 towards methanol

This paper focuses on enhancing the performance of electrocatalytic CO2 reduction reaction (CO2RR) by improving the dispersion of cobalt phthalocyanine (CoPc), especially for the methanol formation with multi-walled carbon nanotubes (CNTs) as a support. The promising CNTs-supported CoPc hybrid was prepared based on ball milling technique, and the surface morphology was characterized by means of those methods such as scanning electron microscopy (SEM), Fourier transform infrared spectrometer (FT-IR) and X-ray photoelectron spectra (XPS). Then, the synergistic effect of CNTs and ball milling on CO2RR performance was analyzed by those methods of cyclic voltammetry (CV), linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS), gas chromatography (GC), and proton nuclear magnetic resonance spectroscopy (1HNMR). Subsequently, the reduction mechanism of CO2 on ball-milled CoPc/CNTs was revealed based on the DFT calculations. The results showed that the electrocatalyst CoPc/CNTs hybrid prepared with sonication exhibited a conversion efficiency of CO2 above 60% at -1.0 V vs. RHE, accompanied by the Faradaic efficiencies of nearly 50% for CO and 10% for methanol, respectively. The addition of CNTs as the support improved the utilization efficiency of CoPc and reduced the transfer resistance of species and electrons. Then the ball-milling method further improved the dispersion of CoPc on CNTs, which resulted in the fact that the methanol efficiency was raised by 6% and partial current density was increased by nearly 433%. The better dispersion of CoPc on CNTs adjusted the reduction pathway of CO2 and resulted in the enhancement of methanol selectivity and catalytic activity of CO2. The probable pathway for methanol production was proposed as CO2 → *CO2- → *COOH → *CO → *CHO → *CH2O → *OCH3 → CH3OH. This suggests the significance of the ball-milling method during the preparation of better supported catalysts for CO2RR towards those high-valued products.

Super-Branched PdCu Alloy for Efficiently Converting Carbon Dioxide to Carbon Monoxide

The alloying of noble metals with Cu is one of the most effective strategies for improving catalytic performance and reducing cost in electrocatalytic carbon dioxide reduction reactions (CO₂RR). Previous works usually focused on the influence of morphology and composition on the catalytic activity, but lacked the study of the valence state ratio of metals and the electron transfer behavior on alloys. In this work, PdCu-2 alloy (Pd/Cu molar ratio is 1:2) was obtained by a simple one-step solvothermal method, which can effectively convert CO₂ to CO with a maximum Faradaic efficiency (FE) of 85% at -0.9 V (vs. RHE). Then, the effect of the chemical state of Pd and Cu on the catalytic performance was investigated. The X-ray photoelectron spectroscopy (XPS) shows that the binding energy of Pd in PdCu alloy has a negative shift, which has affected the adsorption of key intermediates. When the proportion of oxidized state and zero-valent metal in the alloy is about 1:2, the PdCu alloy shows the best catalytic activity. In addition, the transient photovoltage (TPV) measurements further demonstrate that due to the introduction of Cu, the electron transfer rate of PdCu-2 becomes the slowest, which helps the accumulation of electrons on PdCu-2 and leads to the improvement of catalytic performance for electrocatalytic CO₂RR. This work can provide more insights into the alloy catalysts of electrocatalytic CO₂RR.

Challenges and Opportunities in Electrocatalytic CO2 Reduction to Chemicals and Fuels

The global temperature increase must be limited to below 1.5 °C to alleviate the worst effects of climate change. Electrocatalytic CO2 reduction (ECO2 R) to generate chemicals and feedstocks is considered one of the most promising technologies to cut CO2 emission at an industrial level. However, despite decades of studies, advances at the laboratory scale have not yet led to high industrial deployment rates. This Review discusses practical challenges in the industrial chain that hamper the scaling-up deployment of the ECO2 R technology. Faradaic efficiencies (FEs) of about 100 % and current densities above 200 mA cm-2 have been achieved for the ECO2 R to CO/HCOOH, and the stability of the electrolysis system has been prolonged to 2000 h. For ECO2 R to C2 H4 , the maximum FE is over 80 %, and the highest current density has reached the A cm-2 level. Thus, it is believed that ECO2 R may have reached the stage for scale-up. We aim to provide insights that can accelerate the development of the ECO2 R technology.

Nature-Inspired Design of Molybdenum-Selenium Dual-Single-Atom Electrocatalysts for CO2 Reduction

Electrochemical CO₂ reduction (ECR) is becoming an increasingly important technology for achieving carbon neutrality. Inspired by the structure of naturally occurring Mo-dependent enzymes capable of activating CO₂ , a heteronuclear Mo-Se dual-single-atom electrocatalyst (MoSA-SeSA) for ECR into CO with a Faradaic efficiency of above 90% over a broad potential window from -0.4 to -1.0 V versus reversible hydrogen electrode is demonstrated here. Both operando characterization and theoretical simulation results verify that MoSA acts as central atoms that directly interact with the ECR feedstock and intermediates, whereas the SeSA adjacent to MoSA modulates the electronic structure of MoSA through long-range electron delocalization for inhibiting MoSA poisoning caused by strong CO adsorption. In addition, the SeSAs far from MoSA help suppress the competing hydrogen evolution side reaction and accelerate the CO₂ transport by repelling H₂ O. This work provides new insight into the precise regulation and in-depth understanding of multisite synergistic catalysis at the atomic scale.

Temperature-Dependent CO2 Electroreduction over Fe-N-C and Ni-N-C Single-Atom Catalysts

Reaction temperature is an important parameter to tune the selectivity and activity of electrochemical CO₂ reduction reaction (CO₂ RR) due to different thermodynamics of CO₂ RR and competitive hydrogen evolution reaction (HER). In this work, temperature-dependent CO₂ RR over Fe-N-C and Ni-N-C single-atom catalysts are investigated from 303 to 343 K. Increasing the reaction temperature improves and decreases CO Faradaic efficiency over Fe-N-C and Ni-N-C catalysts at high overpotentials, respectively. CO current density over Fe-N-C catalyst increases with temperature, then gets into a plateau at 323 K, finally reaches the maximum value of 185.8 mA cm^-2 at 343 K. While CO current density over Ni-N-C catalyst achieves the maximum value of 252.5 mA cm^-2 at 323 K, and then drops significantly to 202.9 mA cm^-2 at 343 K. Temperature programmed desorption results and density functional theory calculations reveal that the difference of temperature-dependent variation on CO Faradaic efficiency and current density between Fe-N-C and Ni-N-C catalysts results from the varied adsorption strength of key reaction intermediates during CO₂ RR.

Enhancing selectivity through decrypting the uncoordinated zirconium sites in MOF electrocatalysts

Zirconium (Zr)-based porphyrinic metal-organic frameworks (PCN-223-M) were employed as the electrocatalysts to explore the effect of uncoordinated Zr sites on the performance of the CO₂ reduction reaction (CO₂RR). PCN-223-AA with the lowest uncoordinated number of 0.79 exhibited the highest FE(CO) of 90.7%. It was demonstrated that the catalytic performance of PCN-223-M showed negative correlation to the uncoordinated Zr sites. This research provided a rational strategy to design efficient MOF electrocatalysts with few uncoordinated metal sites for highly selective CO₂RR.

Platinum-Decorated Ceria Enhances CO2 Electroreduction in Solid Oxide Electrolysis Cells

CO₂ electroreduction by solid oxide electrolysis cells (SOECs) can not only attenuate the greenhouse effect, but also convert surplus electrical energy into chemical energy. The adsorption and activation of CO₂ on the cathode play an important role in the SOEC performance. La_0.6 Sr_0.4 Co_0.2 Fe_0.8 O_3-δ -Ce_0.8 Sm_0.2 O_2-δ (LSCF-SDC; SDC=samarium-doped ceria) is a promising SOEC cathode. However, its electrocatalytic activity still needs to be improved. In this study, Pt/SDC interfaces are constructed by decorating Pt nanoparticles onto the SDC surface. Electrochemical measurements indicate that the polarization resistance of the SOEC is decreased from 0.308 to 0.120 Ω cm² , and the current density is improved from 0.913 to 1.420 A cm^-2 at 1.6 V and 800 °C. Physicochemical characterizations suggest that construction of the Pt/SDC interfaces increases the oxygen vacancy concentration on the cathode and boosts CO₂ adsorption and dissociation, which leads to enhanced CO₂ electroreduction performance in SOECs.

Carboxylative Cyclization of 2-Butenoates with Carbon Dioxide: Access to Glutaconic Anhydrides

Cyclic anhydrides are versatile synthons and functional comonomers. Herein, we reported an organic base-promoted carboxylative cyclization of 2-butenoates with carbon dioxide to produce important glutaconic anhydrides in good yields. This metal-free reaction showed broad substrate scopes and proceeded under mild reaction conditions.

Heterogeneous Single-Atom Catalysts for Electrochemical CO2 Reduction Reaction

The electrochemical CO₂ reduction reaction (CO₂ RR) is of great importance to tackle the rising CO₂ concentration in the atmosphere. The CO₂ RR can be driven by renewable energy sources, producing precious chemicals and fuels, with the implementation of this process largely relying on the development of low-cost and efficient electrocatalysts. Recently, a range of heterogeneous and potentially low-cost single-atom catalysts (SACs) containing non-precious metals coordinated to earth-abundant elements have emerged as promising candidates for the CO₂ RR. Unfortunately, the real catalytically active centers and the key factors that govern the catalytic performance of these SACs remain ambiguous. Here, this ambiguity is addressed by developing a fundamental understanding of the CO₂ RR-to-CO process on SACs, as CO accounts for the major product from CO₂ RR on SACs. The reaction mechanism, the rate-determining steps, and the key factors that control the activity and selectivity are analyzed from both experimental and theoretical studies. Then, the synthesis, characterization, and the CO₂ RR performance of SACs are discussed. Finally, the challenges and future pathways are highlighted in the hope of guiding the design of the SACs to promote and understand the CO₂ RR on SACs.

Striking dual functionality of a novel Pd@Eu-MOF nanocatalyst in C(sp2)-C(sp2) bond-forming and CO2 fixation reactions

Pd nanoparticles were immobilized on a highly porous, hydrothermally stable Eu-MOF via solution impregnation and H2 reduction to yield a novel Pd@Eu-MOF nanocatalyst. This composite was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), inductively coupled plasma optical emission spectroscopy (ICP-OES), powder X-ray diffraction (PXRD) and X-ray photoelectron spectroscopy (XPS). Unprecedentedly, the Pd@Eu-MOF nanocatalyst could be applied with excellent results in two strikingly different, mechanistically distinct, reactions i.e., Suzuki-Miyaura cross-coupling and cycloaddition of CO2 to a range of epoxides. Under the best reaction conditions, 98-99% yields have been attained in both catalytic processes. Moreover, in either case the heterogeneous catalyst was easily recovered and efficiently reused for more than four cycles, indicating its high stability and reproducibility. PXRD, TEM and XPS measurements on the recycled catalyst confirmed that it maintained its original structure and morphology; no Pd NP agglomeration was observed.

Game Analysis of Wind Storage Joint Ventures Participation in Power Market Based on a Double-Layer Stochastic Optimization Model

The volatility of a new energy output leads to bidding bias when participating in the power market competition. A pumped storage power station is an ideal method of stabilizing new energy volatility. Therefore, wind power suppliers and pumped storage power stations first form wind storage joint ventures to participate in power market competition. At the same time, middlemen are introduced, constructing an upper-level game model (considering power producers and wind storage joint ventures) that forms equilibrium results of bidding competition in the wholesale and power distribution markets. Based on the equilibrium result of the upper-level model, a lower model is constructed to distribute the profits from wind storage joint ventures. The profits of each wind storage joint venture, wind power supplier, and pumped storage power station are obtained by the Nash negotiation and the Shapely value method. Finally, a case study is conducted. The results show that the wind storage joint ventures can improve the economics of the system. Further, the middlemen can smooth the rapid fluctuation of power price in the distribution and wholesale market, maintaining a smooth and efficient operation of the electricity market. These findings provide information for the design of an electricity market competition mechanism and the promotion of new energy power generation.

Synergistic Catalysis over Iron-Nitrogen Sites Anchored with Cobalt Phthalocyanine for Efficient CO2 Electroreduction

Simultaneously achieving high Faradaic efficiency, current density, and stability at low overpotentials is essential for industrial applications of electrochemical CO₂ reduction reaction (CO₂ RR). However, great challenges still remain in this catalytic process. Herein, a synergistic catalysis strategy is presented to improve CO₂ RR performance by anchoring Fe-N sites with cobalt phthalocyanine (denoted as CoPc©Fe-N-C). The potential window of CO Faradaic efficiency above 90% is significantly broadened from 0.18 V over Fe-N-C alone to 0.71 V over CoPc©Fe-N-C while the onset potential of CO₂ RR over both catalysts is as low as -0.13 V versus reversible hydrogen electrode. What is more, the maximum CO current density is increased ten times with significantly enhanced stability. Density functional theory calculations suggest that anchored cobalt phthalocyanine promotes the CO desorption and suppresses the competitive hydrogen evolution reaction over Fe-N sites, while the *COOH formation remains almost unchanged, thus demonstrating unprecedented synergistic effect toward CO₂ RR.