Dosimetric characterisation of anthropomorphic PRESAGE ® dosimeter and EBT2 film for partial breast radiotherapy

A Review of PRESAGE Radiochromic Polymer and the Compositions for Application in Radiotherapy Dosimetry

Recent advances in radiotherapy technology and techniques have allowed a highly conformal radiation to be delivered to the tumour target inside the body for cancer treatment. A three-dimensional (3D) dosimetry system is required to verify the accuracy of the complex treatment delivery. A 3D dosimeter based on the radiochromic response of a polymer towards ionising radiation has been introduced as the PRESAGE dosimeter. The polyurethane dosimeter matrix is combined with a leuco-dye and a free radical initiator, whose colour changes in proportion to the radiation dose. In the previous decade, PRESAGE gained improvement and enhancement as a 3D dosimeter. Notably, PRESAGE overcomes the limitations of its predecessors, the Fricke gel and the polymer gel dosimeters, which are challenging to fabricate and read out, sensitive to oxygen, and sensitive to diffusion. This article aims to review the characteristics of the radiochromic dosimeter and its clinical applications. The formulation of PRESAGE shows a delicate balance between the number of radical initiators, metal compounds, and catalysts to achieve stability, optimal sensitivity, and water equivalency. The applications of PRESAGE in advanced radiotherapy treatment verifications are also discussed.

Review on the feasibility of using PRESAGE® dosimeter in various radiotherapy techniques

The emergence of advanced radiotherapy techniques, such as intensity-modulated radiotherapy (IMRT), brachytherapy, conformal radiotherapy, magnetic resonance-guided radiotherapy (MRgRT), stereotactic synchrotron radiotherapy (SSRT) and microbeam radiotherapy (MRT), has increased the importance of the verification of volumetric dose distribution. The verification of dose distribution is usually done by 2D films and 3D gel dosimeters, but PRESAGE® due to its affordability, reproducibility, precision, accuracy, unique dosimetric and physical properties is considered as an effective candidate in providing 3D dose data. PRESAGE® is insensitive to oxygen contamination, machinable and can be molded to a variety of shapes and sizes. It is absorbing rather than scattering light which facilitates high-accuracy readout by optical computed tomography (OP-CT). This review focuses on the feasibility of using PRESAGE® in various complicated radiotherapy techniques by comparing its measured doses with 2D films and treatment planning system (TPS) calculated doses.

Quality assurance of intensity-modulated radiotherapy treatment planning: a dosimetric comparison

Aim

The purpose of this study was to analyse the comparison of intensity-modulated radiation therapy quality assurance (IMRT QA) using Gafchromic® EBT3 film, Electronic portal imaging device (EPID) and MapCHECK®2.

Background

Pretreatment authentication is the main apprehension in advanced radiation therapy treatment plans such as IMRT.

Materials and methods

A total of 20 patients were planned on Eclipse treatment planning system using 6 and 15 MV separately.

Results

Gamma index of EBT3 film results shows the following average passing rates: 97% for 6 MV and 96·6% for 15 MV using criteria of ±5% of 3 mm, ±3% of 3 mm and ±3% of 2 mm for brain. However, by using ±5% of 3 mm and ±3% of 3 mm criteria, the average passing rates were 95·4% on 6 MV and 95·2% on 15 MV for prostate. For EPID, the results show the average passing rates as 97·8% for 6 MV and 97·2% for 15 MV in for brain. In cases in which ±5% of 3 mm and ±3% of 3 mm were used, the average passing rates were 96·6% for 6 MVand 96·1% for 15 MV for prostate. MapCHECK®2 results show average passing rates of 96·4% for 6 and 96·2% for 15 MV, respectively, for brain using criteria of ±5% of 3 mm, ±3% of 3 mm and ±3% of 2 mm, whereas for ±5% of 3 mm and ±3% of 3 mm the average rates are 95·2% for 6 and 94·7% for 15 MV in prostate.

Conclusions

The EPID results are better than the other methods, and hence EPID can be used effectively for IMRT pretreatment verifications.

Dosimetric feasibility of an anthropomorphic three-dimensional PRESAGE® dosimeter for verification of single entry hybrid catheter accelerated partial breast brachytherapy

Purpose

To determine the feasibility of an anthropomorphic breast polyurethane-based three-dimensional (3D) dosimeter with cavity to measure dose distributions and skin dose for a commercial strut-based applicator strut-adjusted volume implant (SAVI™) 6–1.

Materials and methods

An anthropomorphic breast 3D dosimeter was created with a cavity to accommodate the SAVI™ strut-based device. 2 Gy was prescribed to the breast dosimeter having D95 to planning target volume evaluation (PTV_EVAL) while limiting 125% of the prescribed dose to the skin. Independent dose distribution verification was performed with GAFCHROMIC® EBT2 film. The dose distribution from the 3D dosimeter was compared to the distributions from commercial brachytherapy treatment planning system (TPS) and film. Point skin doses, line profiles and dose–volume histogram (DVHs) for the skin and PTV_EVAL were compared.

Results

The maximum difference in skin dose for TPS and the 3D dosimeter was 4% whereas 41% between the TPS and EBT2 film. The maximum dose difference for line profiles between TPS, 3D dosimeter, and film was 4·1%. DVHs of skin and PTV_EVAL for TPS and 3D dosimeter differed by a maximum of 4% at 5 mm depth and skin differed by a maximum 1·5% between TPS and 3D dosimeter. The criterion for gamma analysis comparison was 92·5% at ±5%±3 mm criterion. The TPS demonstrated at least ±5% comparability in predicting dose to the skin, PTV_EVAL and normal breast tissue.

Conclusions

3D anthropomorphic polyurethane dosimeter with cavity gives comparable results to the TPS dose predictions and GAFCHROMIC® EBT2 film results in the context of HDR brachytherapy.