Use of Catechol As Selective Redox Mediator in Scanning Electrochemical Microscopy Investigations

The Renaissance of Ferrocene-Based Electrocatalysts: Properties, Synthesis Strategies, and Applications

The fascinating electrochemical properties of the redox-active compound ferrocene have inspired researchers across the globe to develop ferrocene-based electrocatalysts for a wide variety of applications. Advantages including excellent chemical and thermal stability, solubility in organic solvents, a pair of stable redox states, rapid electron transfer, and nontoxic nature improve its utility in various electrochemical applications. The use of ferrocene-based electrocatalysts enables control over the intrinsic properties and electroactive sites at the surface of the electrode to achieve specific electrochemical activities. Ferrocene and its derivatives can function as a potential redox medium that promotes electron transfer rates, thereby enhancing the reaction kinetics and electrochemical responses of the device. The outstanding electrocatalytic activity of ferrocene-based compounds at lower operating potentials enhances the specificity and sensitivity of reactions and also amplifies the response signals. Owing to their versatile redox chemistry and catalytic activities, ferrocene-based electrocatalysts are widely employed in various energy-related systems, molecular machines, and agricultural, biological, medicinal, and sensing applications. This review highlights the importance of ferrocene-based electrocatalysts, with emphasis on their properties, synthesis strategies for obtaining different ferrocene-based compounds, and their electrochemical applications.

Laser-induced porous graphene electrodes from polyketimine membranes for paracetamol sensing

The development of cost-effective materials for fabricating electrodes is crucial for drug, pharmaceutical and environmental applications. This paper presents the synthesis and characterization of a novel polyketimine (PKI) membrane obtained by condensing partially of different weight percentages of oxidized polyvinyl alcohol and aminated polyether sulfone. Using the PKI membrane as a scaffold, we introduced laser-induced graphene electrodes (LIGEs) for the efficient electrochemical sensing of paracetamol (PCM), which serves as a model drug. Electrochemical measurements were conducted to assess the physico-chemical properties, including laser-induced porous graphene features, such as the heterogeneous electron transfer (HET) rate and electrochemically active surface area (ECSA). The obtained results demonstrate that the LIGEs exhibit excellent performance in PCM sensing, showing a linear detection range of 50-600 µM with a detection limit (LOD) as low as 14.3 µM and a good selectivity toward uric acid. Furthermore, the functionalization of the electrode surface with AuNPs improved the electrode physico-chemical properties (HET and ECSA) and lowered the detection limit down to 1.1 µM. Consequently, these affordable electrodes hold great potential for analysing other drugs and detecting heavy metal cations in various applications.

Exploiting mixed conducting polymers in organic and bioelectronic devices

Efficient transport of both ionic and electronic charges in conjugated polymers (CPs) has enabled a wide range of novel electrochemical devices spanning applications from energy storage to bioelectronic devices. In this Perspective, we provide an overview of the fundamental physical processes which underlie the operation of mixed conducting polymer (MCP) devices. While charge injection and transport have been studied extensively in both ionic and electronic conductors, translating these principles to mixed conducting systems proves challenging due to the complex relationships among the individual materials properties. We break down the process of electrochemical (de)doping, the basic feature exploited in mixed conducting devices, into its key steps, highlighting recent advances in the study of these physical processes in the context of MCPs. Furthermore, we identify remaining challenges in further extending fundamental understanding of MCP-based device operation. Ultimately, a deeper understanding of the elementary processes governing operation in MCPs will drive the advancement in both materials design and device performance.

Highly stable silver nanohybrid electrocatalysts for the oxygen reduction reaction

Silver nanoparticles (AgNPs) were deliberately functionalized via aryl diazonium chemistry with a monolayer of calix[4]arenes. The resulting nanohybrids show high efficiency and high selectivity toward the ORR in alkaline media along with an exceptional durability and a high methanol tolerance.

Barium 5-(tert-butyl)-2,3-dihydroxybenzenesulfonate

Catechols and their derivatives attract great scientific interest due to the broad spectrum of their functional properties, including complexation, redox behavior, association ability and antioxidant activity. Because of the low molecular mass and two-electron redox process, they are considered to be a promising energy storage compound in different types of electrochemical power sources, such as metal-ion batteries or redox flow batteries. Herein, we report a preparation of the sterically hindered sulfonated catechol, namely the barium salt of 5-(tert-butyl)-2,3-dihydroxybenzenesulfonic acid, by the direct sulfonation of 4-tert-butylcatechol, by concentrated sulfuric acid. The proposed procedure is green and atom-economic, providing the desired product in high yield after simple purification. The solvent-free procedure is inexpensive and highly scalable, which enables direct industrial production of the title product. The resulting product was characterized by the 1H and 13C nuclear magnetic resonance (NMR) and ESI-high resolution mass spectrometry (ESI-HRMS).

Mediated Charge Transfer at Nanoelectrodes: A New Approach to Electrochemical Reactivity Mapping and Nanosensing

Scanning electrochemical microscopy (SECM) is a powerful tool for mapping surface reactivity. Electrochemical mapping of electrocatalytic processes at the nanoscale is, however, challenging because the surface of a nanoelectrode tip is easily fouled by impurities and/or deactivated by products and intermediates of innersphere surface reactions. To overcome this difficulty, we introduce new types of SECM nanotips based on bimolecular electron transfer between the dissolved electroactive species and a redox mediator attached to the surface of a carbon nanoelectrode. A tris(2,2'-bipyridine)ruthenium complex, Ru(bpy)₃, that undergoes reversible oxidation/reduction reactions at both positive and negative potentials was used to prepare the SECM nanoprobes for mapping a wide range of electrocatalytic processes through oxidation of H₂, reduction of O₂, and both oxidation and reduction of H₂O₂ at the tip. In addition to high-resolution reactivity mapping and localized kinetic measurements, chemically modified nanoelectrodes can serve as nanosensors for a number of important analytes such as reactive oxygen and nitrogen species and neurotransmitters.

SECM Investigation of Carbon Composite Thermoplastic Electrodes

Thermoplastic electrodes (TPEs) are carbon composite electrodes consisting of graphite and thermoplastic polymer binder. TPE production is a solvent-based method, which makes it easy to fabricate and pattern into complex geometries, contrary to classical carbon composite electrodes. Depending on the composition (carbon type, binder, and composition ratio), TPEs can give excellent electrochemical performance and high conductivity. However, these TPEs are relatively new electrode materials, and thorough electrochemical characterization is still missing to understand and predict why large differences between TPEs exist. We used scanning electrochemical microscopy (SECM) as a screening tool to characterize TPEs. SECM data treatment based on scanning probe microscopy imaging allows a fast and easy comparison of the numerous images, as well as the optimization of the preparation. Experiments suggest that TPEs behave as a network of interacting microelectrodes made by electrochemically active islands isolated between less active areas. Higher carbon content in TPEs is not always indicative of more uniform electrodes with better electrochemical performances. Using various SECM redox probes, it is possible to select a specific graphite or polymer type for the analyte of interest. For example, TPEs made with COC:3569 are the best compromise for general detection, whereas PMMA:11 μm is better suited for catechol-like polyphenol analysis.

Investigation of Protective Properties of Organic Layers toward Reactive Oxygen Species

The antioxidant protective properties of polyaromatic organic layers were evaluated toward reactive oxygen species (ROS) using scanning electrochemical microscopy in a foot-printing strategy. The layers were prepared by electrografting of aryldiazonium salts. Where p-(methyl)phenyl films show only weak protective properties toward ROS, p-(ethynyl)phenyl films evidence efficient protection of the covered surfaces. Applied potentials and electrolytes used during oxygen reduction reaction are critical parameters to control, prevent, or reduce the influence of ROS production and hence enhance the device lifetime.

Molecular Sieving and Current Rectification Properties of Thin Organic Films

For the purpose of preparing well-organized functional surfaces, carbon and gold substrates were modified using electroreduction of a tetrahedral-shape preorganized tetra-aryldiazonium salt, leading to the deposition of ultrathin organic films. Characterization of the modified surfaces has been performed using cyclic voltammetry, X-ray photoelectron spectroscopy, infrared absorption spectroscopy, ellipsometry, atomic force microscopy, and contact angle measurements. The specific design of the tetra-aryldiazonium salts leads to an intrinsic structuring of the resulting organic films, allowing molecular sieving and current rectification properties toward redox probes in solution.

Nanoscale Electrochemistry of sp(2) Carbon Materials: From Graphite and Graphene to Carbon Nanotubes

Carbon materials have a long history of use as electrodes in electrochemistry, from (bio)electroanalysis to applications in energy technologies, such as batteries and fuel cells. With the advent of new forms of nanocarbon, particularly, carbon nanotubes and graphene, carbon electrode materials have taken on even greater significance for electrochemical studies, both in their own right and as components and supports in an array of functional composites. With the increasing prominence of carbon nanomaterials in electrochemistry comes a need to critically evaluate the experimental framework from which a microscopic understanding of electrochemical processes is best developed. This Account advocates the use of emerging electrochemical imaging techniques and confined electrochemical cell formats that have considerable potential to reveal major new perspectives on the intrinsic electrochemical activity of carbon materials, with unprecedented detail and spatial resolution. These techniques allow particular features on a surface to be targeted and models of structure-activity to be developed and tested on a wide range of length scales and time scales. When high resolution electrochemical imaging data are combined with information from other microscopy and spectroscopy techniques applied to the same area of an electrode surface, in a correlative-electrochemical microscopy approach, highly resolved and unambiguous pictures of electrode activity are revealed that provide new views of the electrochemical properties of carbon materials. With a focus on major sp(2) carbon materials, graphite, graphene, and single walled carbon nanotubes (SWNTs), this Account summarizes recent advances that have changed understanding of interfacial electrochemistry at carbon electrodes including: (i) Unequivocal evidence for the high activity of the basal surface of highly oriented pyrolytic graphite (HOPG), which is at least as active as noble metal electrodes (e.g., platinum) for outer-sphere redox processes. (ii) Demonstration of the high activity of basal plane HOPG toward other reactions, with no requirement for catalysis by step edges or defects, as exemplified by studies of proton-coupled electron transfer, redox transformations of adsorbed molecules, surface functionalization via diazonium electrochemistry, and metal electrodeposition. (iii) Rationalization of the complex interplay of different factors that determine electrochemistry at graphene, including the source (mechanical exfoliation from graphite vs chemical vapor deposition), number of graphene layers, edges, electronic structure, redox couple, and electrode history effects. (iv) New methodologies that allow nanoscale electrochemistry of 1D materials (SWNTs) to be related to their electronic characteristics (metallic vs semiconductor SWNTs), size, and quality, with high resolution imaging revealing the high activity of SWNT sidewalls and the importance of defects for some electrocatalytic reactions (e.g., the oxygen reduction reaction). The experimental approaches highlighted for carbon electrodes are generally applicable to other electrode materials and set a new framework and course for the study of electrochemical and interfacial processes.

Electrochemistry of ferrocene derivatives on highly oriented pyrolytic graphite (HOPG): quantification and impacts of surface adsorption

Cyclic voltammetry of three ferrocene derivatives - (ferrocenylmethyl)trimethylammonium (FcTMA(+)), ferrocenecarboxylic acid (FcCOOH), and ferrocenemethanol (FcCH2OH) - in aqueous solutions shows that the reduced form of the first two redox species weakly adsorbs onto freshly cleaved surfaces of highly oriented pyrolytic graphite (HOPG), with the fractional surface coverage being in excess of 10% of a monolayer at a bulk concentration level of 0.25 mM for both compounds. FcCH2OH was found to exhibit greater and stronger adsorption (up to a monolayer) for the same bulk concentration. The adsorption of FcTMA(+) on freshly cleaved surfaces of high quality (low step edge density) and low quality (high step edge density) HOPG is the same within experimental error, suggesting that the amount of step edges has no influence on the adsorption process. The amount of adsorption of FcTMA(+) is the same (within error) for low quality HOPG, irrespective of whether the surface is freshly cleaved or left in air for up to 12 hours, while - with aging - high quality HOPG adsorbs notably more FcTMA(+). The formation of an airborne contaminating film is proposed to be responsible for the enhanced entrapment of FcTMA(+) on aged high quality HOPG surfaces, while low quality surfaces appear less prone to the accumulation of such films. The impact of the adsorption of ferrocene derivatives on graphite for voltammetric studies is discussed. Adsorption is quantified by developing a theory and methodology to process cyclic voltammetry data from peak current measurements. The accuracy and applicability, as well as limits of the approach, are demonstrated for various adsorption isotherms.

Mapping nanometric electronic property changes induced by an aryl diazonium sub-monolayer on HOPG

The morphology as well as the electric and electronic properties of aryl diazonium, in particular 4-nitrobenzene-diazonium (NBD), films on HOPG surfaces have been studied at the nanoscale level.

Electrodeposition of gold nanoparticles on aryl diazonium monolayer functionalized HOPG surfaces

Gold nanoparticle electrodeposition on a modified HOPG surface with a monolayer organic film based on aryl diazonium chemistry has been studied. This organic monolayer is electrochemically grown with the use of 2,2-diphenyl-1-picrylhydrazyl (DPPH), a radical scavenger. The electrodeposition of gold on this modified surface is highly favored resulting in an AuNP surface density comparable to that found on glassy carbon. AuNPs grow only in the areas covered by the organic monolayer leaving free clean HOPG zones. A progressive mechanism for the nucleation and growth is followed giving hemispherical AuNPs, homogeneously distributed on the surface and their sizes can be well controlled by the applied electrodeposition potential. By using AFM, C-AFM and electrochemical measurements with the aid of two redox probes, namely Fe(CN)6(4-)/Fe(CN)6(3-) and dopamine, relevant results about the electrochemical modified surface as well as the gold nanoparticles electrodeposited on them are obtained.

Redox-dependent spatially resolved electrochemistry at graphene and graphite step edges

The electrochemical (EC) behavior of mechanically exfoliated graphene and highly oriented pyrolytic graphite (HOPG) is studied at high spatial resolution in aqueous solutions using Ru(NH3)6(3+/2+) as a redox probe whose standard potential sits close to the intrinsic Fermi level of graphene and graphite. When scanning electrochemical cell microscopy (SECCM) data are coupled with that from complementary techniques (AFM, micro-Raman) applied to the same sample area, different time-dependent EC activity between the basal planes and step edges is revealed. In contrast, other redox couples (ferrocene derivatives) whose potential is further removed from the intrinsic Fermi level of graphene and graphite show uniform and high activity (close to diffusion-control). Macroscopic voltammetric measurements in different environments reveal that the time-dependent behavior after HOPG cleavage, peculiar to Ru(NH3)6(3+/2+), is not associated particularly with any surface contaminants but is reasonably attributed to the spontaneous delamination of the HOPG with time to create partially coupled graphene layers, further supported by conductive AFM measurements. This process has a major impact on the density of states of graphene and graphite edges, particularly at the intrinsic Fermi level to which Ru(NH3)6(3+/2+) is most sensitive. Through the use of an improved voltammetric mode of SECCM, we produce movies of potential-resolved and spatially resolved HOPG activity, revealing how enhanced activity at step edges is a subtle effect for Ru(NH3)6(3+/2+). These latter studies allow us to propose a microscopic model to interpret the EC response of graphene (basal plane and edges) and aged HOPG considering the nontrivial electronic band structure.

Nucleation, aggregative growth and detachment of metal nanoparticles during electrodeposition at electrode surfaces

The nucleation and growth of metal nanoparticles (NPs) on surfaces is of considerable interest with regard to creating functional interfaces with myriad applications. Yet, key features of these processes remain elusive and are undergoing revision. Here, the mechanism of the electrodeposition of silver on basal plane highly oriented pyrolytic graphite (HOPG) is investigated as a model system at a wide range of length scales, spanning electrochemical measurements from the macroscale to the nanoscale using scanning electrochemical cell microscopy (SECCM), a pipette-based approach. The macroscale measurements show that the nucleation process cannot be modelled as either truly instantaneous or progressive, and that step edge sites of HOPG do not play a dominant role in nucleation events compared to the HOPG basal plane, as has been widely proposed. Moreover, nucleation numbers extracted from electrochemical analysis do not match those determined by atomic force microscopy (AFM). The high time and spatial resolution of the nanoscale pipette set-up reveals individual nucleation and growth events at the graphite basal surface that are resolved and analysed in detail. Based on these results, corroborated with complementary microscopy measurements, we propose that a nucleation-aggregative growth-detachment mechanism is an important feature of the electrodeposition of silver NPs on HOPG. These findings have major implications for NP electrodeposition and for understanding electrochemical processes at graphitic materials generally.

Electrochemistry at highly oriented pyrolytic graphite (HOPG): lower limit for the kinetics of outer-sphere redox processes and general implications for electron transfer models

Electron transfer kinetics for outer-sphere redox couples is fast on the basal surface of highly oriented pyrolytic graphite (HOPG).

Locally induced and self-induced "electroclick" onto a self-assembled monolayer: writing and reading with SECM under unbiased conditions

Localized "electroclick" was achieved on azido-terminated self-assembled monolayers using Scanning Electrochemical Microscopy (SECM) in feedback mode, in which the substrate is not electrically connected (unbiased conditions). The method allows both the local immobilization of diverse functional moieties and the monitoring of each modification step at a micrometer scale. Conditions of the "click" coupling reaction were optimized especially to avoid the deposit of metallic copper by the choice of a specific ligand to stabilize the Cu(I) species. The catalytic efficiency in localized "electroclick" reaction of Cu(II)TMPA (TMPA: tris(2-pyridylmethyl)amine) as the "click" catalyst was compared with a derivative containing an alkyne group Cu(II)6eTMPA, the same molecule playing the role of the catalyst and the substrate. Evidences for surface self-catalysis propagation are demonstrated through SECM imaging showing a random 2D progression of the catalytic modification.

Electron transport in all-carbon molecular electronic devices

Carbon has always been an important electrode material for electrochemical applications, and the relatively recent development of carbon nanotubes and graphene as electrodes has significantly increased interest in the field. Carbon solids, both sp² and sp³ hybridized, are unique in their combination of electronic conductivity and the ability to form strong bonds to a variety of other elements and molecules. The Faraday Discussion included broad concepts and applications of carbon materials in electrochemistry, including analysis, energy storage, materials science, and solid-state electronics. This introductory paper describes some of the special properties of carbon materials useful in electrochemistry, with particular illustrations in the realm of molecular electronics. The strong bond between sp² conducting carbon and aromatic organic molecules enables not only strong electronic interactions across the interface between the two materials, but also provides sufficient stability for practical applications. The last section of the paper discusses several factors which affect the electron transfer kinetics at highly ordered pyrolytic graphite, some of which are currently controversial. These issues bear on the general question of how the structure and electronic properties of the carbon electrode material control its utility in electrochemistry and electron transport, which are the core principles of electrochemistry using carbon electrodes.

Selection, characterisation and mapping of complex electrochemical processes at individual single-walled carbon nanotubes: the case of serotonin oxidation

The electrochemical (EC) oxidation of the neurotransmitter, serotonin, at individual single-walled carbon nanotubes (SWNTs) is investigated at high resolution using a novel platform that combines flow-aligned SWNTs with atomic force microscopy, Raman microscopy, electronic conductance measurements, individual SWNT electrochemistry and high-resolution scanning electrochemical cell microscopy (SECCM). SECCM has been used to visualise the EC activity along side-wall sections of metallic SWNTs to assess the extent to which side-walls promote the electrochemistry of this complex multi-step process. Uniform and high EC activity is observed that is consistent with significant reaction at the side-wall, rather than electrochemistry being driven by defects alone. By scanning forward and reverse (trace and retrace) over the same region of a SWNT, it is also possible to assess any blocking of EC activity by serotonin oxidation reaction products. At a physiologically relevant concentration (5 μM), there is no detectable blocking of SWNTs, which can be attributed, at least in part, to the high diffusion rate to an individual, isolated SWNT in the SECCM format. At higher serotonin concentration (2 mM), oligomer formation from oxidation products is much more significant and major blocking of the EC process is observed from line profiles recorded as the SECCM meniscus moves over an SWNT. The SECCM line profile morphology is shown to be highly diagnostic of whether blocking occurs during EC processes. The studies herein add to a growing body of evidence that various EC processes at SWNTs, from simple outer sphere redox reactions to complex multi-step processes, occur readily at pristine SWNTs. The platform described is of general applicability to various types of nanostructures and nanowires.

Effect of tribolayer formation on corrosion of CoCrMo alloys investigated using scanning electrochemical microscopy

Scanning electrochemical microscopy was used to probe the topography and electrochemical activity of CoCrMo alloys mechanically polished in the presence of bovine calf serum (BCS) in a hip simulator. These substrates are made of the same alloy used in metal-on-metal bearings for artificial hip joints. The BCS serves as an in vitro substitute for the synovial fluid which forms a lubricant in the actual orthopedic device. Chemical and mechanical processes result in the formation of a tribolayer which passivates the alloy surface. Our studies of the heterogeneous electron transfer between ferrocenemethanol and the alloy indicate that the tribolayer formed on both high- and low-carbon substrates is highly heterogeneous with regions of high electrochemical activity. Whereas pits in the samples polished in the absence of BCS show the regions of highest electrochemical activity, the tribolayer-coated samples have electrochemical hot spots in topographically smooth regions of the surface. The tribolayer provides some attenuation of the electrochemical activity of the alloy but does not prevent the possibility of corrosion from occurring.