Accurate MALDI-TOF/TOF sequencing of one-bead-one-compound peptide libraries with application to the identification of multiligand protein affinity agents using in situ click chemistry screening

Enhancing Cysteine Chemoproteomic Coverage through Systematic Assessment of Click Chemistry Product Fragmentation

Mass spectrometry-based chemoproteomics has enabled functional analysis and small molecule screening at thousands of cysteine residues in parallel. Widely adopted chemoproteomic sample preparation workflows rely on the use of pan cysteine-reactive probes such as iodoacetamide alkyne combined with biotinylation via copper-catalyzed azide-alkyne cycloaddition (CuAAC) or "click chemistry" for cysteine capture. Despite considerable advances in both sample preparation and analytical platforms, current techniques only sample a small fraction of all cysteines encoded in the human proteome. Extending the recently introduced labile mode of the MSFragger search engine, here we report an in-depth analysis of cysteine biotinylation via click chemistry (CBCC) reagent gas-phase fragmentation during MS/MS analysis. We find that CBCC conjugates produce both known and novel diagnostic fragments and peptide remainder ions. Among these species, we identified a candidate signature ion for CBCC peptides, the cyclic oxonium-biotin fragment ion that is generated upon fragmentation of the N(triazole)-C(alkyl) bond. Guided by our empirical comparison of fragmentation patterns of six CBCC reagent combinations, we achieved enhanced coverage of cysteine-labeled peptides. Implementation of labile searches afforded unique PSMs and provides a roadmap for the utility of such searches in enhancing chemoproteomic peptide coverage.

Fluorescent probes for bioimaging of potential biomarkers in Parkinson's disease

This review comprehensively summarizes various types of fluorescent probes for PD and their applications for detection of various PD biomarkers.

Peptide-Peptide Co-Assembly: A Design Strategy for Functional Detection of C-peptide, A Biomarker of Diabetic Neuropathy

Diabetes-related neuropathy is a debilitating condition that may be averted if it can be detected early. One possible way this can be achieved at low cost is to utilise peptides to detect C-peptide, a biomarker of diabetic neuropathy. This depends on peptide-peptide co-assembly, which is currently in a nascent stage of intense study. Instead, we propose a bead-based triple-overlay combinatorial strategy that can preserve inter-residue information during the screening process for a suitable complementary peptide to co-assemble with C-peptide. The screening process commenced with a pentapeptide general library, which revealed histidine to be an essential residue. Further screening with seven tetrapeptide focused libraries led to a table of self-consistent peptide sequences that included tryptophan and lysine at high frequencies. Three complementary nonapeptides (9mer com-peptides), wpkkhfwgq (Trp-D), kwkkhfwgq (Lys-D), and KWKKHFWGQ (Lys-L) (as a negative control) were picked from this table for co-assembly studies with C-peptide. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) and circular dichroism (CD) spectroscopies were utilized to study inter-peptide interactions and changes in secondary structures respectively. ATR-FTIR studies showed that there is indeed inter-peptide interaction between C-peptide and the tryptophan residues of the 9mer com-peptides. CD studies of unaggregated and colloidal C-peptide with the 9mer com-peptides suggest that the extent of co-assembly of C-peptide with Trp-D is greatest, followed by Lys-D and Lys-L. These results are promising and indicate that the presented strategy is viable for designing and evaluating longer complementary peptides, as well as complementary peptides for co-assembly with other polypeptides of interest and importance. We discuss the possibility of designing complementary peptides to inhibit toxic amyloidosis with this approach.

Protein-Catalyzed Capture Agents

Protein-catalyzed capture agents (PCCs) are synthetic and modular peptide-based affinity agents that are developed through the use of single-generation in situ click chemistry screens against large peptide libraries. In such screens, the target protein, or a synthetic epitope fragment of that protein, provides a template for selectively promoting the noncopper catalyzed azide-alkyne dipolar cycloaddition click reaction between either a library peptide and a known ligand or a library peptide and the synthetic epitope. The development of epitope-targeted PCCs was motivated by the desire to fully generalize pioneering work from the Sharpless and Finn groups in which in situ click screens were used to develop potent, divalent enzymatic inhibitors. In fact, a large degree of generality has now been achieved. Various PCCs have demonstrated utility for selective protein detection, as allosteric or direct inhibitors, as modulators of protein folding, and as tools for in vivo tumor imaging. We provide a historical context for PCCs and place them within the broader scope of biological and synthetic aptamers. The development of PCCs is presented as (i) Generation I PCCs, which are branched ligands engineered through an iterative, nonepitope-targeted process, and (ii) Generation II PCCs, which are typically developed from macrocyclic peptide libraries and are precisely epitope-targeted. We provide statistical comparisons of Generation II PCCs relative to monoclonal antibodies in which the protein target is the same. Finally, we discuss current challenges and future opportunities of PCCs.

Library Design-Facilitated High-Throughput Sequencing of Synthetic Peptide Libraries

A methodology to achieve high-throughput de novo sequencing of synthetic peptide mixtures is reported. The approach leverages shotgun nanoliquid chromatography coupled with tandem mass spectrometry-based de novo sequencing of library mixtures (up to 2000 peptides) as well as automated data analysis protocols to filter away incorrect assignments, noise, and synthetic side-products. For increasing the confidence in the sequencing results, mass spectrometry-friendly library designs were developed that enabled unambiguous decoding of up to 600 peptide sequences per hour while maintaining greater than 85% sequence identification rates in most cases. The reliability of the reported decoding strategy was additionally confirmed by matching fragmentation spectra for select authentic peptides identified from library sequencing samples. The methods reported here are directly applicable to screening techniques that yield mixtures of active compounds, including particle sorting of one-bead one-compound libraries and affinity enrichment of synthetic library mixtures performed in solution.

High-Throughput Approaches to the Development of Molecular Imaging Agents

Molecular imaging allows for the visualization of changes at the cellular level in diseases such as cancer. A successful molecular imaging agent must rely on disease-selective targets and ligands that specifically interact with those targets. Unfortunately, the translation of novel target-specific ligands into the clinic has been frustratingly slow with limitations including the complex design and screening approaches for ligand identification, as well as their subsequent optimization into useful imaging agents. This review focuses on combinatorial library approaches towards addressing these two challenges, with particular focus on phage display and one-bead one-compound (OBOC) libraries. Both of these peptide-based techniques have proven successful in identifying new ligands for cancer-specific targets and some of the success stories will be highlighted. New developments in screening methodology and sequencing technology have pushed the bounds of phage display and OBOC even further, allowing for even faster and more robust discovery of novel ligands. The combination of multiple high-throughput technologies will not only allow for more accurate identification, but also faster affinity maturation, while overall streamlining the process of translating novel ligands into clinical imaging agents.

An efficient strategy to enhance binding affinity and specificity of a known isozyme inhibitor

The binding profile of a known inhibitor, benzenesulfonamide, against a family of carbonic anhydrase isozymes was efficiently enhanced via high-throughput screening of customized combinatorial one-bead-one-compound peptide libraries modified with the inhibitor molecule. The screening of the conjugate libraries recognized subtle variations in the microenvironments of the target enzyme and thus facilitated the identification of short peptide sequences that bind selectively to a close proximity of the active site. The identified peptide portions contributed significantly to the overall binding of the conjugate peptides with greatly enhanced affinity as well as improved specificity towards the target isozyme. The interactions between the inhibitors and the isozymes were validated by surface plasmon resonance (SPR), pull-down assay and enzymatic activity measurement. This high-throughput approach proved useful and efficient to enhance the binding profile of known inhibitors and may apply to developing effective inhibitors for a wide range of isozyme families.

Screening and identification of mimotopes of the major shrimp allergen tropomyosin using one-bead-one-compound peptide libraries

The one-bead-one-compound (OBOC) combinatorial peptide library is a powerful tool to identify ligand and receptor interactions. Here, we applied the OBOC library technology to identify mimotopes specific to the immunoglobulin E (IgE) epitopes of the major shellfish allergen tropomyosin. OBOC peptide libraries with 8-12 amino acid residues were screened with serum samples from patients with shellfish allergy for IgE mimotopes of tropomyosin. Twenty-five mimotopes were identified from the screening and their binding reactivity to tropomyosin-specific IgE was confirmed by peptide ELISA. These mimotopes could be divided into seven clusters based on sequence homology, and epitope mapping by EpiSearch of the clustered mimotopes was performed to characterize and confirm the validity of mimotopes. Five out of six of the predicted epitopes were found to overlap with previously identified epitopes of tropomyosin. To further confirm the mimicry potential of mimotopes, BALB/c mice were immunized with mimotopes conjugated to keyhole limpet hemocyanin and assayed for their capacity to induce tropomyosin-specific antibodies. BALB/c mice that received mimotope immunization were found to have an elevated level of tropomyosin-specific immunoglobulin G, but not mice that received an irrelevant mimotope. This study pioneers the successful application of the OBOC libraries using whole sera to screen and identify multiple shrimp allergen mimotopes and validates their mimicry potential using in vitro, in vivo, and in silico methods.Cellular & Molecular Immunology advance online publication, 14 september 2015; doi:10.1038/cmi.2015.83.

Investigating fluorescent dyes in fluorescence-assisted screenings

Screening of bead-based peptide libraries against fluorescent dye-labeled target proteins was found to be significantly influenced by the dye characteristics. Commercially available red fluorescent dyes with net negative charges adversely showed strong interactions with library beads. The introduction of zwitterionic dyes significantly reduced the unwanted interactions, which sheds light upon using the right fluorescent probe for acquisition of reliable results in various fluorescence-assisted applications.

A protein-targeting strategy used to develop a selective inhibitor of the E17K point mutation in the PH domain of Akt1

Ligands that can bind selectively to proteins with single amino-acid point mutations offer the potential to detect or treat an abnormal protein in the presence of the wild type (WT). However, it is difficult to develop a selective ligand if the point mutation is not associated with an addressable location, such as a binding pocket. Here we report an all-chemical synthetic epitope-targeting strategy that we used to discover a 5-mer peptide with selectivity for the E17K-transforming point mutation in the pleckstrin homology domain of the Akt1 oncoprotein. A fragment of Akt1 that contained the E17K mutation and an I19[propargylglycine] substitution was synthesized to form an addressable synthetic epitope. Azide-presenting peptides that clicked covalently onto this alkyne-presenting epitope were selected from a library using in situ screening. One peptide exhibits a 10:1 in vitro selectivity for the oncoprotein relative to the WT, with a similar selectivity in cells. This 5-mer peptide was expanded into a larger ligand that selectively blocks the E17K Akt1 interaction with its PIP3 (phosphatidylinositol (3,4,5)-trisphosphate) substrate.

Observation of the controlled assembly of preclick components in the in situ click chemistry generation of a chitinase inhibitor

The Huisgen cycloaddition of azides and alkynes, accelerated by target biomolecules, termed "in situ click chemistry," has been successfully exploited to discover highly potent enzyme inhibitors. We have previously reported a specific Serratia marcescens chitinase B (SmChiB)-templated syn-triazole inhibitor generated in situ from an azide-bearing inhibitor and an alkyne fragment. Several in situ click chemistry studies have been reported. Although some mechanistic evidence has been obtained, such as X-ray analysis of [protein]-["click ligand"] complexes, indicating that proteins act as both mold and template between unique pairs of azide and alkyne fragments, to date, observations have been based solely on "postclick" structural information. Here, we describe crystal structures of SmChiB complexed with an azide ligand and an O-allyl oxime fragment as a mimic of a click partner, revealing a mechanism for accelerating syn-triazole formation, which allows generation of its own distinct inhibitor. We have also performed density functional theory calculations based on the X-ray structure to explore the acceleration of the Huisgen cycloaddition by SmChiB. The density functional theory calculations reasonably support that SmChiB plays a role by the cage effect during the pretranslation and posttranslation states of selective syn-triazole click formation.

Click chemistry facilitates formation of reporter ions and simplified synthesis of amine-reactive multiplexed isobaric tags for protein quantification

We report the development of novel reagents for cell-level protein quantification, referred to as Caltech isobaric tags (CITs), which offer several advantages in comparison with other isobaric tags (e.g., iTRAQ and TMT). Click chemistry, copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC), is applied to generate a gas-phase cleavable linker suitable for the formation of reporter ions. Upon collisional activation, the 1,2,3-triazole ring constructed by CuAAC participates in a nucleophilic displacement reaction forming a six-membered ring and releasing a stable cationic reporter ion. To investigate its utility in peptide mass spectrometry, the energetics of the observed fragmentation pathway are examined by density functional theory. When this functional group is covalently attached to a target peptide, it is found that the nucleophilic displacement occurs in competition with formation of b- and y-type backbone fragment ions regardless of the amino acid side chains present in the parent bioconjugate, confirming that calculated reaction energetics of reporter ion formation are similar to those of backbone fragmentations. Based on these results, we apply this selective fragmentation pathway for the development of CIT reagents. For demonstration purposes, duplex CIT reagent is prepared using a single isotope-coded precursor, allyl-d(5)-bromide, with reporter ions appearing at m/z 164 and 169. Isotope-coded allyl azides for the construction of the reporter ion group can be prepared from halogenated alkyl groups which are also employed for the mass balance group via N-alkylation, reducing the cost and effort for synthesis of isobaric pairs. Owing to their modular designs, an unlimited number of isobaric combinations of CIT reagents are, in principle, possible. The reporter ion mass can be easily tuned to avoid overlapping with common peptide MS/MS fragments as well as the low mass cutoff problems inherent in ion trap mass spectrometers. The applicability of the CIT reagent is tested with several model systems involving protein mixtures and cellular systems.