Colloidal Au-enhanced surface plasmon resonance immunosensing

High spatial resolution surface plasmon resonance imaging using a plasmonic chip

The surface plasmon resonance (SPR) technique has been widely applied to biosensing technologies for the rapid quantification of biomolecules without enzyme and fluorescent labeling. However, the conventional prism-coupling SPR method generally has a detection area of a few mm2, and the large contribution of the background signal forms a barrier to highly sensitive detection. Based on a highly spatially resolved SPR method, the present study constructed a scanning GC-SPR imaging instrument using an objective lens with a high numerical aperture and a plasmonic chip that could be used for grating-coupled SPR. Focusing light on the diffraction limit can suppress background signals and improve detection sensitivity. SPR imaging can also be performed by scanning a focal spot. Using this method, the refractive index of a mixture of water and dimethyl sulfoxide was measured with a detection accuracy of 2.43 × 10-3 RIU. Polydopamine films prepared with a thickness of <5 nm were also measured, and each film thickness was evaluated with high sensitivity from the effective refractive index detected in a small area of <1 µm2.

Capping Agents Enable Well-Dispersed and Colloidally Stable Metallic Magnesium Nanoparticles

Mg nanoparticles are an emerging plasmonic material due to Mg's abundance and ability to sustain size- and shape-dependent localized surface plasmon resonances across a broad range of wavelengths from the ultraviolet to the near infrared. However, Mg nanoparticles are colloidally unstable due to their tendency to aggregate and sediment. Nanoparticle aggregation can be inhibited by the addition of capping agents that impart surface charges or steric repulsion. Here, we report that the common capping agents poly(vinyl) pyrrolidone (PVP), polyethylene glycol (PEG), cetyltrimethylammonium bromide (CTAB), and sodium dodecyl sulfate (SDS) interact differently and have varied effects on the aggregation and colloidal stability of Mg nanoparticles. Nanoparticles synthesized in the presence of PVP showed improvements in colloidal stability and reduced aggregation, as observed by electron microscopy and optical spectroscopy. The binding of PVP was confirmed through infrared and X-ray photoelectron spectroscopy. The influence of PVP on the reduction of di-n-butyl magnesium was evaluated through analysis of particle size distribution and Mg yield as a function of reaction time, reducing agent, and temperature. Furthermore, the presence of PVP drastically changes the growth pattern of metallic Mg structures obtained from the reduction of the Grignard reagents butylmagnesium chloride and phenylmagnesium chloride by lithium naphthalenide: large polycrystalline aggregates and well-separated faceted nanoparticles grow without and with PVP, respectively. This study provides new synthetic routes that generate colloidally stable and well-dispersed Mg nanoparticles for plasmonic and other applications.

Surface plasmonic biosensors: principles, designs and applications

Recently, surface plasmon resonance (SPR) biosensors have been widely used in environmental monitoring, food contamination detection and diagnosing medical conditions due to their superior sensitivity, label-free detection and rapid analysis speed. This paper briefly elaborates on the development history of SPR technology and introduces SPR signal sensing principles. A summary of recent applications of SPR sensors in different fields is highlighted, including their figures of merit and limitations. Finally, the personal perspectives and future development trends about sensor preparation and design are discussed in detail, which may be critical for improving the performance of SPR sensors.

Sensitivity investigation of a biosensor with resonant coupling of propagating surface plasmons to localized surface plasmons in the near infrared region

Gold nanoparticles (AuNPs) can be used to improve the performance of propagating surface plasmon resonance (PSPR) refractive index sensors. The resonant coupling effect between PSPR and localized surface plasmon resonance (LSPR) supported by AuNPs on sensitivity remains to be elucidated in terms of evanescent field intensity and distribution. In this study, we directly compare the sensitivity of the PSPR sensor and the resonant coupling mode between the PSPR and LSPR sensors in the wavelength scanning mode. The sensitivity of PSPR can be significantly improved in the near-infrared region excitation wavelength. 1,6-Hexanedithiol was used to achieve a AuNP modified gold film (GF-AuNP). The PSPR excited by the prism coupling mechanism can effectively stimulate LSPR supported by AuNPs in the GF-AuNP, and then resonant coupling is generated. Compared with PSPR, the resonant coupling mode shows a decrease in penetration depth by 28 times and an increase in the surface electric field intensity by 4.6 times in the numerical simulations. The decrease in the penetration depth in the GF-AuNP is made at the expense of bulk sensitivity. The biosensing sensitivity of the GF-AuNP shows up to 7-fold improvement in the carcinoembryonic antigen immunoassay and the GF-AuNP is proven to be a better biosensor. The experimental measurements are in excellent agreement with the theoretical model. This study can be also considered as a guide for the design of plasmonic sensors for detecting multiple substances at different scales, such as cells and proteins.

Biocompatible engineered erythrocytes as plasmonic sensor initiators for high-sensitive screening of non-small cell lung cancer-derived exosomal miRNA in an integrated system

The development of a holistic solution is crucial for exosome-based liquid biopsy, which is a significant advancement from basic research to clinical application for the early and non-invasive diagnosis of disease. However, the challenge of current technology is how to facilitate the separation and quickly connect with the detection. Herein, employing miRNA-155 as a target, a novel integrated concentration and determination system of exosomes (ICDSE) was fabricated for the targeted enrichment of exosomes from the plasma of patients with non-small cell lung cancer and instant downstream analysis of exosomal miRNA. This ICDSE consists of aptamer-engineered erythrocytes with a supramolecular plasmonic biosensor. The streamlined analytical procedure benefited from engineered erythrocytes as an interlinkage, needlessly removing them before extracting total RNA due to the lack of nuclei. With the assistance of a specific aptamer and simple centrifugation, engineered erythrocytes achieved exceptional enrichment of exosomes within 30 min. The LOD of the biosensor for miR-155 approached 2.03 fM due to the substantially high refractive index of the quadruplet supramolecular dendrimer and zirconium metal-organic framework. Impressively, the developed ICDSE successfully isolated and evaluated exosomes from clinical specimens of patients with NSCLC, which can also be promising for other diseases with identifiable exosome signatures. Thus, our ICDSE is expected to have widespread biomedical applications, as it is economical and well-accepted.

Sensitive bioanalytical methods for telomerase activity detection: a cancer biomarker

Telomerase is an enzyme that protects the length of telomeres by adding guanine-rich repetitive sequences. In tumors, gametes, and stem cells, telomerase activity is exerted. Telomerase activity can be a cancer biomarker for therapeutic and diagnosis approaches. So, a number of studies concentrating on the discovery of telomerase activity were reported. Bioanalytical devices, in comparison with other tests, have numerous advantages including low expense, simplicity, and excellent sensitivity and specificity. In this article we reviewed recent studies on the subject of various bioanalytical methods based on different nanomaterials. Optical, electrochemical, and quartz crystal microbalance (QCM) are prominent analytical techniques that are mentioned in this paper.

Rapid and sensitive detection of PD-L1 exosomes using Cu-TCPP 2D MOF as a SPR sensitizer

Two-dimensional metal organic framework (2D MOF Cu-TCPP) with significantly enhanced photoelectric properties was synthesized by a simple hydrothermal method. The π-stacked electroactive porphyrin molecules of TCPP-based 2D MOF carry out charge transport in the MOF structure. The d-d band transition of Cu²⁺ and its 2D ultra-thin characteristics can produce excellent near-infrared light absorption to couple with SPR. Three key parameters including the refractive index sensitivity, detection accuracy and quality factor were improved significantly for 2D MOF modified gold chips. Especially, the refractive index sensitivity was increased from 98 to 137.67°/RIU after modified with 2D MOF. Thus, for the first time, we applied it as a signal enhancer to improve direct SPR assay for the Programmed death ligand-1 (PD-L1) exosomes. Owning to its large specific surface area, excellent photoelectric properties, highly ordered structure, good dispersion and biocompatibility, the LOD of the SPR sensor was 16.7 particles/mL. The reliability and practicability were further validated by analysis of PD-L1 exosomes in human serum samples. The recovery rate was 93.43 %-102.35%, with RSD of 5.79 %-14.6%. Given their excellent signal amplification ability, 2D MOF Cu-TCPP could serve as an ideal SPR sensitizer for rapid and sensitive detection of trace disease markers.

Nanostructured plasmonic chips employing nanopillar and nanoring hole arrays for enhanced sensitivity of SPR-based biosensing

We present a theoretical analysis of the different nanostructured plasmonic sensor chips-consisting of plasmonic nanostructures present on the surface of plasmonic thin films-interrogated using the Kretschmann configuration for highly sensitive localized sensing, with high tunability from the visible to the infrared regions. Rigorous coupled-wave analysis is performed to analyze all the proposed nanostructured sensor chips and compare their sensing performance. The sensitivity parameters are defined to focus on the detection of a thin layer of biomolecules on the surface of nanostructures. The dimensions of the nanostructures and the incident angle shift the plasmon resonance wavelengths and can be used to tune the operating wavelength. The nanostructured films create local regions of high electric fields, which results in enhanced sensitivity of the proposed structures. The proposed sensors can be used in surface plasmon resonance imaging to detect multiple biomolecules in a single measurement. An extremely high surface sensitivity and figure of merit (FOMS) of 91 nm nm-1 and 0.59 nm-1 has been found, respectively, for one of the proposed nanostructured sensing platforms. Moreover, we demonstrate a very high differential reflectance of 55% per nm thickness of the biolayer.

Simultaneous and sensitive detection of two pathogenic genes of thrombotic diseases using SPRi sensor with one-step fixation probe by a poly-adenine oligonucleotide approach

Single-base mutations of Factor V Leiden G1691A and Prothrombin gene G20210A are the main genetic risk factors for inherited thrombotic tendency. The establishment for rapid and efficient detection method is of great significance to the prevention of venous thrombosis. In this work, a multiplexed, highly sensitive and regenerable surface plasmon resonance imaging (SPRi) sensor is described to identify and detect the two pathogenic genes by fixing probes in one-step. The probes are fixed by ployA, which is a simpler, faster and lower cost modification method compared with traditional thiol (-SH). PolyA-DNA-AuNPs is used to amplify the signal to improve sensitivity. The detection limit of the sensor is 8 pM, and it has a wide dynamic range between 8 pM and 100 nM and a good linear relationship between 8 pM to 50 pM. The equilibrium dissociation constant (KD) of 3.0 (± 0.3) pM indicates a high binding capacity. Based on the advantages of high-throughput detection, the SPRi chip can simultaneously identify and detect two genes related to thrombotic Diseases. In addition, more than 90% signal intensity can still be obtained on the surface of the chip after being regenerated of 25 times, indicating that this SPRi sensor has good stability and reproducibility. The established SPRi sensor has the advantages of high-throughput, high-sensitivity, label-free and no need for amplification, which is expected to become an effective technical means for real-time online detection of gene point mutations, and can be extended to detect and quantify a wider range of DNA mutation diseases.

Preparation, Functionalization, Modification, and Applications of Nanostructured Gold: A Critical Review

Gold nanoparticles (Au NPs) play a significant role in science and technology because of their unique size, shape, properties and broad range of potential applications. This review focuses on the various approaches employed for the synthesis, modification and functionalization of nanostructured Au. The potential catalytic applications and their enhancement upon modification of Au nanostructures have also been discussed in detail. The present analysis also offers brief summaries of the major Au nanomaterials synthetic procedures, such as hydrothermal, solvothermal, sol-gel, direct oxidation, chemical vapor deposition, sonochemical deposition, electrochemical deposition, microwave and laser pyrolysis. Among the various strategies used for improving the catalytic performance of nanostructured Au, the modification and functionalization of nanostructured Au produced better results. Therefore, various synthesis, modification and functionalization methods employed for better catalytic outcomes of nanostructured Au have been summarized in this review.

Photothermal catalysts for hydrogenation reactions

Hydrogenation reactions are an important process in today's chemical industry. Typically, hydrogenation reactions involve the removal of an unsaturated bond in olefins or other polyenes via thermal catalysis using hydrogen. As hydrogenation reactions are often carried out at temperatures up to several hundred degrees, they require significant energy input which typically comes from burning fossil fuels. In order to conserve fossil fuels and reduce CO₂ emissions, researchers are now developing photothermal catalysts for hydrogenation reactions, which harness concentrated sunlight to achieve the required reaction temperatures or introduce sunlight into thermal-driven reaction systems to reduce the reaction temperatures. Photothermal catalysts thus need to be able to efficiently absorb sunlight, whilst also being able to drive the desired hydrogenation reaction with high activity and selectivity. In this review, we summarize recent research aimed at the development of photothermal catalysts for CO₂/CO hydrogenation and alkene/alkyne/aromatic hydrogenation. Particular emphasis is placed on uncovering the reaction mechanisms at the molecular level, which in turn guides the rational design of photothermal catalysts with better performance.

Immunoassay Biosensing of Foodborne Pathogens with Surface Plasmon Resonance Imaging: A Review

Surface plasmon resonance imaging (SPRi) has been increasingly used in the label-free detections of various biospecies, such as organic toxins, proteins, and bacteria. In combination with the well-developed microarray immunoassay, SPRi has the advantages of rapid detection in tens of minutes and multiplex detection of different targets with the same biochip. Both prism-based and prism-free configurations of SPRi have been developed for highly integrated portable immunosensors, which have shown great potential on pathogen detection and living cell imaging. This review summarizes the recent advances in immunoassay biosensing with SPRi, with special emphasis on the multiplex detections of foodborne pathogens. Additionally, various spotting techniques, surface modification protocols, and signal amplification methods have been developed to improve the specificity and sensitivity of the SPRi biochip. The challenges in multiplex detections of foodborne pathogens in real-world samples are addressed, and future perspectives of miniaturizing SPRi immunosensors with nanotechnologies are discussed.

A label-free lead(II) ion sensor based on surface plasmon resonance and DNAzyme-gold nanoparticle conjugates

Detection of lead(II) (Pb²⁺) ions in water is important for the protection of human health and environment. The growing demand for onsite detection still faces challenges for sensitive and easy-to-use methods. In this work, a novel surface plasmon resonance (SPR) biosensor based on GR-5 DNAzyme and gold nanoparticles (AuNPs) was developed. Thiolated DNAzyme was immobilized on the gold surface of the sensor chip followed by anchoring the substrate-functionalized AuNPs through the DNAzyme-substrate hybridization. The coupling between the localized surface plasmon (LSP) of AuNPs and the surface plasmon polaritons (SPP) on the gold sensor surface was used to improve the sensitivity. The substrate cleavage in the presence of Pb²⁺ ions was catalyzed by DNAzyme, leading to the removal of AuNPs and the diminished LSP-SPP coupling. The optimal detection limit was 80 pM for the sensor fabricated with 1 μM DNAzyme, corresponding to two or three orders of magnitude lower than the toxicity levels of Pb²⁺ in drinking water defined by WHO and USEPA. By tuning the surface coverage of DNAzyme, the sensitivity and dynamic range could be controlled. This sensor also featured high selectivity to Pb²⁺ ions and simple detection procedure. Successful detection of Pb²⁺ ions in groundwater indicates that this method has the prospect in the onsite detection of Pb²⁺ ions in water. Given the variety of AuNPs and metal-specific DNAzymes, this detection strategy would lead to the development of more sensitive and versatile heavy metal sensors. Graphical abstract.

2D Nanomaterial-Based Surface Plasmon Resonance Sensors for Biosensing Applications

The absorption and binding energy of material plays an important role with a large surface area and conductivity for the development of any sensing device. The newly grown 2D nanomaterials like black phosphorus transition metal dichalcogenides (TMDCs) or graphene have excellent properties for sensing devices' fabrication. This paper summarizes the progress in the area of the 2D nanomaterial-based surface plasmon resonance (SPR) sensor during last decade. The paper also focuses on the structure of Kretschmann configuration, the sensing principle of SPR, its characteristic parameters, application in various fields, and some important recent works related to SPR sensors have also been discussed, based on the present and future scope of this field. The present paper provides a platform for researchers to work in the field of 2D nanomaterial-based SPR sensors.

Label-Free Analysis of Multivalent Protein Binding Using Bioresponsive Nanogels and Surface Plasmon Resonance (SPR)

Precise identification of protein-protein interactions is required to improve our understanding of biochemical pathways for biology and medicine. In physiology, how proteins interact with other proteins or small molecules is crucial for maintaining biological functions. For instance, multivalent protein binding (MPB), in which a ligand concurrently interacts with two or more receptors, plays a key role in regulating complex but accurate biological functions, and its interference is related to many diseases. Therefore, determining MPB and its kinetics has long been sought, which currently requires complicated procedures and instruments to distinguish multivalent binding from monovalent binding. Here, we show a method for quickly evaluating the MPB over monovalent binding and its kinetic parameters in a label-free manner. Engaging pNIPAm-co-AAc nanogels with MPB-capable moieties (e.g., PD-1 antigen and biocytin) permits a surface plasmon resonance (SPR) instrument to evaluate the MPB events by amplifying signals from the specific target molecules. Using our MPB-based method, PD-1 antibody that forms a type of MPB by complexing with two PD-1 proteins, which are currently used for cancer immunotherapy, is detectable down to a level of 10 nM. In addition, small multivalent cations (e.g., Ca²⁺, Fe²⁺, and Fe³⁺) are distinguishably measurable over monovalent cations (e.g., Na⁺ and K⁺) with the pNIPAm-co-AAc nanogels.

High-sensitive and multiplex biosensing assay of NSCLC-derived exosomes via different recognition sites based on SPRi array

Non-small cell lung cancer (NSCLC) have been reported to secret a high concentration of exosomes into blood circulatory system, which is one of sensitive and non-invasive biomarkers for NSCLC's early-stage diagnosis. But it is still lack of feasible and accurate methods to analyze the different NSCLC cells-derived exosomes. Herein, we built a SPRi biosensing assay for high-sensitive and multiplex characterizations of NSCLC-derived exosomes by bioaffinity interactions of antibodies and different recognition sites. By this way, the exosomes derived from normal lung and NSCLC cells can be effectively distinguished through precise identification of the exosomal protein pattern. And the multiplex characterizations of NSCLC-related exosomes are also achieved by anti-CD63, anti-EGFR and anti-EpCAM modified SPRi array. The limit of detection (LOD) of this SPRi-based biosensor approaches to the level of 10⁴ particles/μL with the help of functionalized gold nanoparticles. Besides, the developed biosensing assay was successfully applied in the determination of exosomes purified from clinical plasma samples. This SPRi biosensing strategy might offer a potential alternative for massive high-throughput screening for NSCLC in clinical specimens.

Quantum Plasmonic Immunoassay Sensing

Plasmon-polaritons are among the most promising candidates for next-generation optical sensors due to their ability to support extremely confined electromagnetic fields and empower strong coupling of light and matter. Here we propose quantum plasmonic immunoassay sensing as an innovative scheme, which embeds immunoassay sensing with recently demonstrated room-temperature strong coupling in nanoplasmonic cavities. In our protocol, the antibody-antigen-antibody complex is chemically linked with a quantum emitter label. Placing the quantum-emitter-enhanced antibody-antigen-antibody complexes inside or close to a nanoplasmonic (hemisphere dimer) cavity facilitates strong coupling between the plasmon-polaritons and the emitter label resulting in signature Rabi splitting. Through rigorous statistical analysis of multiple analytes randomly distributed on the substrate in extensive realistic computational experiments, we demonstrate a drastic enhancement of the sensitivity up to nearly 1500% compared to conventional shifting-type plasmonic sensors. Most importantly and in stark contrast to classical sensing, we achieve in the strong-coupling (quantum) sensing regime an enhanced sensitivity that is no longer dependent on the concentration of antibody-antigen-antibody complexes down to the single-analyte limit. The quantum plasmonic immunoassay scheme thus not only leads to the development of plasmonic biosensing for single molecules but also opens up new pathways toward room-temperature quantum sensing enabled by biomolecular inspired protocols linked with quantum nanoplasmonics.

Gold nanoparticle amplification strategies for multiplex SPRi-based immunosensing of human pancreatic islet hormones

In this work, we demonstrate the potential use of SPRi for secretion-monitoring of pancreatic islets, small micro-organs that regulate glucose homeostasis in the body. In the islets, somatostatin works as a paracrine inhibitor of insulin and glucagon secretion. However, this inhibitory effect is lost in diabetic individuals and little is known about its contribution to the pathology of diabetes. Thus, the simultaneous detection of insulin, glucagon and somatostatin could help understand such communications. Previously, the authors introduced an SPRi biosensor to simultaneously monitor insulin, glucagon and somatostatin using an indirect competitive immunoassay. However, our sensor achieved a relatively high LOD for somatostatin detection (246 nM), the smallest of the three hormones. For this reason, the present work aimed to improve the performance of our SPRi biosensor using gold nanoparticles (GNPs) as a means of ensuring somatostatin detection from a small group of islets. Although GNP amplification is frequently reported in the literature for individual detection of analytes using SPR, studies regarding the optimal strategy in a multiplexed SPR setup are missing. Therefore, with the aim of finding the optimal GNP amplification strategies for multiplex sensing we compared three architectures: (1) GNPs immobilized on the sensor surface, (2) GNPs conjugated with primary antibodies (GNP-Ab1) and (3) GNPs conjugated with a secondary antibody (GNP-Ab2). Among these strategies an immunoassay using GNP-Ab2 conjugates was able to achieve multiplex detection of the three hormones without cross-reactivity and with 9-fold LOD improvement for insulin, 10-fold for glucagon and 200-fold for somatostatin when compared to the SPRi biosensor without GNPs. The present work denotes the first report of the simultaneous detection of such hormones with a sensitivity level comparable to ELISA assays, particularly for somatostatin.

Development of a Gold Nanoparticle-Functionalized Surface Plasmon Resonance Assay for the Sensitive Detection of Monoclonal Antibodies and Its Application in Pharmacokinetics

As a prominent human therapeutic, therapeutic monoclonal antibodies (mAbs) have attracted increasing attention in the past decade due to their high-targeting specificity, low toxicity, and prolonged efficacy. Systematic pharmacokinetic analysis of mAbs not only largely facilitates the understanding of their biologic functions but also promotes the development of therapeutic drug discovery, early clinical trial implementation, and therapeutic monitoring. However, the extremely complex nature of biomatrices and the especially low dosages of mAbs make their detection in biomatrices and further pharmacokinetic analysis highly challenging. Therefore, a method capable of reliably, quickly, and sensitively quantifying mAbs in biomatrices is urgently needed. In this work, we developed and evaluated an gold nanoparticle-functionalized surface plasmon resonance assay for cetuximab (C225) detection and pharmacokinetic analysis in rhesus monkeys. Combining its advantages of label-free pretreatment and amplified signal response, the lower limit of quantitation of C225 in monkey serum was reduced to 0.0125 μg/ml, and the linear range had an order of magnitude comparable to that of an ELISA-based method. Furthermore, the pharmacokinetics of C225 in rhesus monkeys was studied after intravenous infusions of single doses at 7.5, 24, and 75 mg/kg. The concentration of C225 in monkey serum was detectable after dosing for 720 hours. We believe that this new strategy will be applicable as a general protocol for mAb quantification, pharmacokinetic characteristic determination, and toxicokinetic analysis during drug development.

Recent Advances in Surface Plasmon Resonance Imaging Sensors

The surface plasmon resonance (SPR) sensor is an important tool widely used for studying binding kinetics between biomolecular species. The SPR approach offers unique advantages in light of its real-time and label-free sensing capabilities. Until now, nearly all established SPR instrumentation schemes are based on single- or several-channel configurations. With the emergence of drug screening and investigation of biomolecular interactions on a massive scale these days for finding more effective treatments of diseases, there is a growing demand for the development of high-throughput 2-D SPR sensor arrays based on imaging. The so-called SPR imaging (SPRi) approach has been explored intensively in recent years. This review aims to provide an up-to-date and concise summary of recent advances in SPRi. The specific focuses are on practical instrumentation designs and their respective biosensing applications in relation to molecular sensing, healthcare testing, and environmental screening.

Real-Time FO-SPR Monitoring of Solid-Phase DNAzyme Cleavage Activity for Cutting-Edge Biosensing

DNA nanotechnology has a great potential in biosensor design including nanostructuring of the biosensor surface through DNA origami, target recognition by means of aptamers, and DNA-based signal amplification strategies. In this paper, we use DNA nanotechnology to describe for the first time the concept of real-time solid-phase monitoring of DNAzyme cleavage activity for the detection of specific single-stranded DNA (ssDNA) with a fiber optic surface plasmon resonance (FO-SPR) biosensor. Hereto, we first developed a robust ligation strategy for the functionalization of the FO-SPR biosensing surface with ssDNA-tethered gold nanoparticles, serving as the substrate for the DNAzyme. Next, we established a relation between the SPR signal change, due to the cleavage activity of the 10-23 DNAzyme, and the concentration of the DNAzyme, showing faster cleavage kinetics for higher DNAzyme concentrations. Finally, we implemented this generic concept for biosensing of ssDNA target in solution. Hereto, we designed a DNAzyme-inhibitor complex, consisting of an internal loop structure complementary to the ssDNA target, that releases active DNAzyme molecules in a controlled way as a function of the target concentration. We demonstrated reproducible target detection with a theoretical limit of detection of 1.4 nM, proving that the presented ligation strategy is key to a universal DNAzyme-based FO-SPR biosensing concept with promising applications in the medical and agrofood sector.

Gold nanoparticle surface engineering strategies and their applications in biomedicine and diagnostics

Gold nanoparticles (AuNPs) have found a wide range of biomedical and environmental monitoring applications (viz. drug delivery, diagnostics, biosensing, bio-imaging, theranostics, and hazardous chemical sensing) due to their excellent optoelectronic and enhanced physico-chemical properties. The modulation of these properties is done by functionalizing them with the synthesized AuNPs with polymers, surfactants, ligands, drugs, proteins, peptides, or oligonucleotides for attaining the target specificity, selectivity and sensitivity for their various applications in diagnostics, prognostics, and therapeutics. This review intends to highlight the contribution of such AuNPs in state-of-the-art ventures of diverse biomedical applications. Therefore, a brief discussion on the synthesis of AuNPs has been summarized prior to comprehensive detailing of their surface modification strategies and the applications. Here in, we have discussed various ways of AuNPs functionalization including thiol, phosphene, amine, polymer and silica mediated passivation strategies. Thereafter, the implications of these passivated AuNPs in sensing, surface-enhanced Raman spectroscopy (SERS), bioimaging, drug delivery, and theranostics have been extensively discussed with the a number of illustrations.

Limits of the Effective Medium Theory in Particle Amplified Surface Plasmon Resonance Spectroscopy Biosensors

The resonant wave modes in monomodal and multimodal planar Surface Plasmon Resonance (SPR) sensors and their response to a bidimensional array of gold nanoparticles (AuNPs) are analyzed both theoretically and experimentally, to investigate the parameters that rule the correct nanoparticle counting in the emerging metal nanoparticle-amplified surface plasmon resonance (PA-SPR) spectroscopy. With numerical simulations based on the Finite Element Method (FEM), we evaluate the error performed in the determination of the surface density of nanoparticles σ when the Maxwell-Garnett effective medium theory is used for fast data processing of the SPR reflectivity curves upon nanoparticle detection. The deviation increases directly with the manifestations of non-negligible scattering cross-section of the single nanoparticle, dipole-dipole interactions between adjacent AuNPs and dipolar interactions with the metal substrate. Near field simulations show clearly the set-up of dipolar interactions when the dielectric thickness is smaller than 10 nm and confirm that the anomalous dispersion usually observed experimentally is due to the failure of the effective medium theories. Using citrate stabilized AuNPs with a nominal diameter of about 15 nm, we demonstrate experimentally that Dielectric Loaded Waveguides (DLWGs) can be used as accurate nanocounters in the range of surface density between 20 and 200 NP/µm², opening the way to the use of PA-SPR spectroscopy on systems mimicking the physiological cell membranes on SiO₂ supports.

Applications of Gold Nanoparticles in Non-Optical Biosensors

Due to their unique properties, such as good biocompatibility, excellent conductivity, effective catalysis, high density, and high surface-to-volume ratio, gold nanoparticles (AuNPs) are widely used in the field of bioassay. Mainly, AuNPs used in optical biosensors have been described in some reviews. In this review, we highlight recent advances in AuNP-based non-optical bioassays, including piezoelectric biosensor, electrochemical biosensor, and inductively coupled plasma mass spectrometry (ICP-MS) bio-detection. Some representative examples are presented to illustrate the effect of AuNPs in non-optical bioassay and the mechanisms of AuNPs in improving detection performances are described. Finally, the review summarizes the future prospects of AuNPs in non-optical biosensors.

SPR signals enhancement by gold nanorods for cell surface marker detection

Introduction: The detection of micrometer-sized particles like cells is limited by surface plasmon resonance (SPR) biosensors because of having a depth of evanescent wave <500 nm. In this study, for the first time, we exhibited the use of streptavidin-functionalized gold nanorods (GNRs) as intensification labels for detection of cell surface markers in SPR-based biosensors.

Methods: The GNRs (ʎ max: 735 nm) were modified with streptavidin using EDC/NHS coupling method and human umbilical vein endothelial cells (HUVECs) were selected as the cell model for detecting VE-cadherin on cell surface using real-time SPR device in the 785 nm wavelength of the laser source.

Results: The investigations revealed that the plasmonic field extension produced from the gold layer and GNRs resulted in multiple enhancement of SPR signals when the wavelength of laser source in SPR instrument was matched with the wavelength of maximum absorbance in GNRs. Moreover, the results showed that the growth of ∆RU value in specific and non-specific bindings for various cell number injections were produced with increasing the cell number.

Conclusion: The results displayed that cell detection can be performed in real- time form without any need to a time-consuming process used in conventional methods like immunocytochemistry, flow cytometry, and western blotting.

Combined measurement of directional Raman scattering and surface-plasmon-polariton cone from adsorbates on smooth planar gold surfaces

Directional-surface-plasmon-coupled Raman scattering (directional RS) has the combined benefits of surface plasmon resonance and Raman spectroscopy, and provides the ability to measure adsorption and monolayer-sensitive chemical information. Directional RS is performed by optically coupling a 50 nm gold film to a Weierstrass prism in the Kretschmann configuration and scanning the angle of the incident laser under total internal reflection. The collected parameters on the prism side of the interface include a full surface-plasmon-polariton cone and the full Raman signal radiating from the cone as a function of incident angle. An instrument for performing directional RS and a quantitative study of the instrumental parameters are herein reported. To test the sensitivity and quantify the instrument parameters, self-assembled monolayers and 10 to 100 nm polymer films are studied. The signals are found to be well-modeled by two calculated angle-dependent parameters: three-dimensional finite-difference time-domain calculations of the electric field generated in the sample layer and projected to the far-field, and Fresnel calculations of the reflected light intensity. This is the first report of the quantitative study of the full surface-plasmon-polariton cone intensity, cone diameter, and directional Raman signal as a function of incident angle. We propose that directional RS is a viable alternative to surface plasmon resonance when added chemical information is beneficial.

Morphological Evolution of Gold Nanoparticles into Nanodendrites Using Catechol-Grafted Polymer Templates

Morphology, dimension, size, and surface chemistry of gold nanoparticles are critically important in determining their optical, catalytic, and photothermal properties. Although many techniques have been developed to synthesize various gold nanostructures, complicated and multistep procedures are required to generate three-dimensional, dendritic gold nanostructures. Here, we present a simple method to synthesize highly branched gold nanodendrites through the well-controlled reduction of gold ions complexed with a catechol-grafted polymer. Dextran grafted with catechols guides the morphological evolution as a polymeric ligand to generate dendritic gold structures through the interconnection of the spherical gold nanoparticles. The reduction kinetics, which is critical for morphological changes, is controllable using dimethylacetamide, which can decrease the metal-ligand dissociation and gold ion diffusivity. This study suggests that mussel-inspired polymer chemistry provides a simple one-pot synthetic route to colloidal gold nanodendrites that are potentially applicable to biosensing and catalysis.

Plasmonic molecular assays: Recent advances and applications for mobile health

Plasmonics-based biosensing assays have been extensively employed for biomedical applications. Significant advancements in use of plasmonic assays for the construction of point-of-care (POC) diagnostic methods have been made to provide effective and urgent health care of patients, especially in resourcelimited settings. This rapidly progressive research area, centered on the unique surface plasmon resonance (SPR) properties of metallic nanostructures with exceptional absorption and scattering abilities, has greatly facilitated the development of cost-effective, sensitive, and rapid strategies for disease diagnostics and improving patient healthcare in both developed and developing worlds. This review highlights the recent advances and applications of plasmonic technologies for highly sensitive protein and nucleic acid biomarker detection. In particular, we focus on the implementation and penetration of various plasmonic technologies in conventional molecular diagnostic assays, and discuss how such modification has resulted in simpler, faster, and more sensitive alternatives that are suited for point-of-use. Finally, integration of plasmonic molecular assays with various portable POC platforms for mobile health applications are highlighted.

Nanoparticle Enhancement Cascade for Sensitive Multiplex Measurements of Biomarkers in Complex Fluids with Surface Plasmon Resonance Imaging

There is a large unmet need for reliable biomarker measurement systems for clinical application. Such systems should meet challenging requirements for large scale use, including a large dynamic detection range, multiplexing capacity, and both high specificity and sensitivity. More importantly, these requirements need to apply to complex biological samples, which require extensive quality control. In this paper, we present the development of an enhancement detection cascade for surface plasmon resonance imaging (SPRi). The cascade applies an antibody sandwich assay, followed by neutravidin and a gold nanoparticle enhancement for quantitative biomarker measurements in small volumes of complex fluids. We present a feasibility study both in simple buffers and in spiked equine synovial fluid with four cytokines, IL-1β, IL-6, IFN-γ, and TNF-α. Our enhancement cascade leads to an antibody dependent improvement in sensitivity up to 40 000 times, resulting in a limit of detection as low as 50 fg/mL and a dynamic detection range of more than 7 logs. Additionally, measurements at these low concentrations are highly reliable with intra- and interassay CVs between 2% and 20%. We subsequently showed this assay is suitable for multiplex measurements with good specificity and limited cross-reactivity. Moreover, we demonstrated robust detection of IL-6 and IL-1β in spiked undiluted equine synovial fluid with small variation compared to buffer controls. In addition, the availability of real time measurements provides extensive quality control opportunities, essential for clinical applications. Therefore, we consider this method is suitable for broad application in SPRi for multiplex biomarker detection in both research and clinical settings.

Localized surface plasmon resonance based biosensing

INTRODUCTION

Bioanalytical sensing based on the principle of localized surface plasmon resonance experiences is currently an extremely rapid development. Novel sensors with new kinds of plasmonic transducers and innovative concepts for the signal development as well as read-out principles were identified. This review will give an overview of the development of this field. Areas covered: The focus is primarily on types of transducers by preparation or dimension, factors for optimal sensing concepts and the critical view of the usability of these devices as innovative sensors for bioanalytical applications. Expert commentary: Plasmonic sensor devices offer a high potential for future biosensing given that limiting factors such as long-time stability of the transducers, the required high sensitivity and the cost-efficient production are addressed. For higher sensitivity, the design of the sensor in shape and material has to be combined with optimal enhancement strategies. Plasmonic nanoparticles from bottom-up synthesis with a post-synthetic processing show a high potential for cost-efficient sensor production. Regarding the measurement principle, LSPRi offers a large potential for multiplex sensors and can provide a high-throughput as well as highly paralleled sensing. The main trends are expected towards optimal LSPR concepts which represent cost-efficient and robust point-of-care solutions, and the use of multiplexed devices for clinical applications.

Functionalized gold nanoparticle-enhanced competitive assay for sensitive small-molecule metabolite detection using surface plasmon resonance

A functionalized gold nanoparticle-enhanced competitive assay was developed to overcome the sensitivity challenge associated with direct SPR sensing of small-molecule metabolites.

A sensitive SPR biosensor based on hollow gold nanospheres and improved sandwich assay with PDA-Ag@Fe3O4/rGO

A novel surface plasmon resonance (SPR) biosensor based on hollow gold nanospheres (HGNPs) and an improved sandwich assay was developed to detect rabbit IgG. The electromagnetic coupling between the HGNPs and Au film, and the notable plasmonic fields spread over the inner and outer surfaces of HGNPs, led to the considerable amplification of the SPR signal. Polydopamine-Ag@Fe₃O₄/reduced graphene oxide (PDA-Ag@Fe₃O₄/rGO) was introduced to bind detection antibody (Ab₂) to form the improved sandwich structure. Ag nanoparticles were excited to produce SPR and their hot electrons were doped on graphene thin films, which amplified the response of biomolecules. Magnetic nanoparticles (Fe₃O₄) simplified the collection of Ab₂-PDA-Ag@Fe₃O₄/rGO. An external layer of polydopamine (PDA) permitted the efficient immobilization of Ab₂ without activation via abundant functional groups and protected the nanoparticles from etching or agglomeration. In addition, because of its large mass, Ab₂-PDA-Ag@Fe₃O₄/rGO also played a key role in the further amplification of the SPR response signals. This novel SPR biosensor exhibited an effective response to the rabbit IgG at the different concentrations ranging from 0.019 to 40.00μgmL^-1. This value is 132 times lower than that observed for a traditional SPR biosensor based on Au-3-mercaptopropionic acid and 8 times lower than that obtained from an Ab₂ sandwich assay, which indicates that the SPR sensor has high sensitivity. In addition, the designed biosensor showed satisfactory recoveries to detect the rabbit IgG spiked in serum samples. Therefore, the novel SPR biosensor with high sensitivity and acceptable recovery has potential for practical applications.

Gold Nanoparticles Used as Protein Scavengers Enhance Surface Plasmon Resonance Signal

Although several researchers had reported on methodologies for surface plasmon resonance (SPR) signal amplification based on the use of nanoparticles (NPs), the majority addressed the sandwich technique and low protein concentration. In this work, a different approach for SPR signal enhancement based on the use of gold NPs was evaluated. The method was used in the detection of two lectins, peanut agglutinin (PNA) and concanavalin A (ConA). Gold NPs were functionalized with antibodies anti-PNA and anti-ConA, and these NPs were used as protein scavengers in a solution. After being incubated with solutions of PNA or ConA, the gold NPs coupled with the collected lectins were injected on the sensor containing the immobilized antibodies. The signal amplification provided by this method was compared to the signal amplification provided by the direct coupling of PNA and ConA to gold NPs. Furthermore, both methods, direct coupling and gold NPs as protein scavengers, were compared to the direct detection of PNA and ConA in solution. Compared to the analysis of free protein, the direct coupling of PNA and ConA to gold NPs resulted in a signal amplification of 10-40-fold and a 13-fold decrease of the limit of detection (LOD), whereas the use of gold NPs as protein scavengers resulted in an SPR signal 40-50-times higher and an LOD 64-times lower.

Elucidating Protein/Ligand Recognition with Combined Surface Plasmon Resonance and Surface Enhanced Raman Spectroscopy

The ability to distinguish between specific and nonspecific binding is important for assessing the interactions between protein receptors and ligands. Surface plasmon resonance (SPR) spectroscopy is an advanced tool to measure binding events, yet the ability to distinguish between specific and nonspecific binding remains a limitation. To address this problem, we use SPR spectroscopy correlated with surface enhanced Raman scattering (SERS). The chemical information present in SERS spectra provides insight into the molecular interactions between functionalized nanoparticles and proteins, which are not detectable by SPR alone. Using a custom instrument with the Kretschmann configuration, we successfully demonstrate simultaneous affinity and the chemical characterization of streptavidin-functionalized gold nanoparticles (STV-NPs) binding to biotin immobilized on a gold film in both air and flowing phosphate buffered saline (PBS). The SPR performance is consistent with that of previous reports. The association constant (K_A) for streptavidin/biotin and STV-NPs/biotin interactions observed (2 ± 1 × 10⁷ M^-1 and 2.4 ± 0.3 × 10¹⁰ M^-1, respectively) agree with literature values and show a strong avidity effect associated with the STV-NPs. The SERS scattering from STV-NPs is excited by the surface plasmon polariton and collected from an objective lens mounted over the fluidic channel. The SERS spectra are recorded simultaneously with the SPR sensorgram, and the detected Raman bands provide chemical insight into the binding event. Multivariate curve resolution analysis of the spectra can differentiate specific from nonspecific binding. This label-free, real time, and surface sensitive detection method provides chemical information to protein/ligand binding affinity measurements.

Nanomaterial-based biosensors for detection of prostate specific antigen

Screening serum for the presence of prostate specific antigen (PSA) belongs to the most common approach for the detection of prostate cancer. This review (with 156 refs.) addresses recent developments in PSA detection based on the use of various kinds of nanomaterials. It starts with an introduction into the field, the significance of testing for PSA, and on current limitations. A first main section treats electrochemical biosensors for PSA, with subsections on methods based on the use of gold electrodes, graphene or graphene-oxide, carbon nanotubes, hybrid nanoparticles, and other types of nanoparticles. It also covers electrochemical methods based on the enzyme-like activity of PSA, on DNA-, aptamer- and biofuel cell-based methods, and on the detection of PSA via its glycan part. The next main section covers optical biosensors, with subsections on methods making use of surface plasmon resonance (SPR), localized SPR and plasmonic ELISA-like schemes. This is followed by subsections on methods based on the use of fiber optics, fluorescence, chemiluminescence, Raman scattering and SERS, electrochemiluminescence and cantilever-based methods. The most sensitive biosensors are the electrochemical ones, with lowest limits of detection (down to attomolar concentrations), followed by mass cantilever sensing and electrochemilumenescent strategies. Optical biosensors show lower performance, but are still more sensitive compared to standard ELISA. The most commonly applied nanomaterials are metal and carbon-based ones and their hybrid composites used for different amplification strategies. The most attractive sensing schemes are summarized in a Table. The review ends with a section on conclusions and perspectives.

Single-Molecule Arrays for Protein and Nucleic Acid Analysis

The last few years have seen breakthroughs that will transform our ability to measure important analytes. Miniaturization of reaction volumes and confinement of analytes of interest into ultrasmall containers have greatly enhanced the sensitivity and throughput of many detection methods. Fabrication of microwell arrays and implementation of bead-based assays have been instrumental in the development of methods for measuring relevant biomolecules, with applications to both diagnostics and fundamental biological studies. In this review, we describe how microwell arrays are fabricated and utilized for measuring analytes of interest. We then discuss the fundamental concepts of digital enzyme-linked immunosorbent assay (ELISA) using single-molecule arrays and applications of microwell arrays to ultrasensitive protein measurements. We also explore the utility of microwell arrays for nucleic acid detection and applications for single-cell studies.

Surface plasmon resonance based spectrophotometric determination of medicinally important thiol compounds using unmodified silver nanoparticles

The determination of thiol based biological molecules and drugs, such as cysteine (Cys) (I), α-lipoic acid (II), and sodium 2-sulfanylethane sulphonate (Mesna (III)) in human plasma are becoming progressively more important due to the growing body of knowledge about their essential role in numerous biological pathways. Herein we demonstrate a sensitive colorimetric sensor for the determination of medicinally important thiol drugs based on aggregation of the citrate capped silver nanoparticles (Ag NPs). This approach exploited the high affinity of thiols towards the Ag NPs surface which could tempt replacement of the citrate shell by the thiolate shell of target molecules, resulting in aggregation of the NPs through intermolecular electrostatic interaction or hydrogen-bonding. Because of aggregation, the plasmon band at around 400nm decreases gradually, along with the appearance of a new band connoting a red shift. The calibration curves are derived from the intensity ratios of A₅₃₀/A₄₀₀, which display a linear relation in the range of 1μM-150μM, 5μM-200μM and 10μM-130μM, respectively. The obtained detection limits (3σ) were found to be 1.5μM, 5.6μM and 10.2μM for compound I-III, respectively. The proposed method has been successfully applied for the detection of thiol compounds in real samples.

Electrochemical Detecting Lung Cancer-Associated Antigen Based on Graphene-Gold Nanocomposite

Using a Au nanoparticle/reduced graphene oxide composite (AuNP-RGO), a signal-enhanced electrochemical immunosensor without label was created to detect neuron-specific enolase (NSE). Furthermore, an environmentally-friendly method was developed to prepare AuNP-RGO by employing chitosan (CS), which served as reducing and stabilizing agent. We showed that the sensitivity of the immunosensor designed in this report was remarkably enhanced because of the numerous active sites in the sensor provided by the AuNP-RGO nanostructure. For the quantification of NSE, the immunosensor exhibited a positive linear relationship with the concentration in the range of 0.1 to 2000 ng/mL, where the limit of the detection was 0.05 ng/mL.

Controllable synthesis of functional nanoparticles by microfluidic platforms for biomedical applications - a review

Nanoparticles have drawn significant attention in biomedicine due to their unique optical, thermal, magnetic and electrical properties which are highly related to their size and morphologies. Recently, microfluidic systems have shown promising potential to modulate critical stages in nanosynthesis, such as nucleation, growth and reaction conditions so that the size, size distribution, morphology, and reproducibility of nanoparticles are optimized in a high throughput manner. In this review, we put an emphasis on a decade of developments of microfluidic systems for engineering nanoparticles in various applications including imaging, biosensing, drug delivery, and theranostic applications.

Exploiting Surface-Plasmon-Enhanced Light Scattering for the Design of Ultrasensitive Biosensing Modality

Development of new detection methodologies and amplification schemes is indispensable for plasmonic biosensors to improve the sensitivity for the detection of trace amounts of analytes. Herein, an ultrasensitive scheme for signal enhancement based on the concept of surface-plasmon-resonance-enhanced light scattering (SP-LS) was validated experimentally and theoretically. The SP-LS of gold nanoparticles' (AuNPs) tags was employed in a sandwich assay for the detection of cardiac troponin I and provided up to 2 orders of magnitude improved sensitivity over conventional AuNPs-enhanced refractometric measurements and 3 orders of magnitude improvement over label-free SPR. Simulations were also performed to provide insights into the physical mechanisms.

Detection of Intermolecular Interactions Based on Surface Plasmon Resonance Registration

Methods for registration of intermolecular interactions based on the phenomenon of surface plasmon resonance (SPR) have become one of the most efficient tools to solve fundamental and applied problems of analytical biochemistry. Nevertheless, capabilities of these methods are often insufficient to detect low concentrations of analytes or to screen large numbers of objects. That is why considerable efforts are directed at enhancing the sensitivity and efficiency of SPR-based measurements. This review describes the basic principles of the detection of intermolecular interactions using this method, provides a comparison of various types of SPR detectors, and classifies modern approaches to enhance sensitivity and efficiency of measurements.

Nanotechnology-Based Surface Plasmon Resonance Affinity Biosensors for In Vitro Diagnostics

In the last decades, in vitro diagnostic devices (IVDDs) became a very important tool in medicine for an early and correct diagnosis, a proper screening of targeted population, and also assessing the efficiency of a specific therapy. In this review, the most recent developments regarding different configurations of surface plasmon resonance affinity biosensors modified by using several nanostructured materials for in vitro diagnostics are critically discussed. Both assembly and performances of the IVDDs tested in biological samples are reported and compared.

Layered Metal Nanoparticle Structures on Electrodes for Sensing, Switchable Controlled Uptake/Release, and Photo-electrochemical Applications

Layered metal nanoparticle (NP) assemblies provide highly porous and conductive composites of unique electrical and optical (plasmonic) properties. Two methods to construct layered metal NP matrices are described, and these include the layer-by-layer deposition of NPs, or the electropolymerization of monolayer-functionalized NPs, specifically thioaniline-modified metal NPs. The layered NP composites are used as sensing matrices through the use of electrochemistry or surface plasmon resonance (SPR) as transduction signals. The crosslinking of the metal NP composites with molecular receptors, or the imprinting of molecular recognition sites into the electropolymerized NP matrices lead to selective and chiroselective sensing interfaces. Furthermore, the electrosynthesis of redox-active, imprinted, bis-aniline bridged Au NP composites yields electrochemically triggered "sponges" for the switchable uptake and release of electron-acceptor substrates, and results in conductive surfaces of electrochemically controlled wettability. Also, photosensitizer-relay-crosslinked Au NP composites, or electrochemically polymerized layered semiconductor quantum dot/metal NP matrices on electrodes, are demonstrated as functional nanostructures for photoelectrochemical applications.

Dual-band photodetector with a hybrid Au-nanoparticles/β-Ga2O3 structure

Lower dark current, higher photoresponse and faster switching time under a 254 nm light illumination and dual-band are obtained for a photodetector through the introduction of Au-NPs.