Detection of zinc finger protein (EGR1) based on electrogenerated chemiluminescence from singlet oxygen produced in a nanoclay-supported porphyrin environment

Novel dual-responsive hydrogel composed of polyacrylamide/Fe-MOF/zinc finger peptide for construction of electrochemical sensing platform

Responsive hydrogels have received much attention for improving the detection performance of electrochemical sensors because of their special responsiveness. However, current responsive hydrogels generally suffer from long response times, ranging from tens of minutes to several hours. This situation severely limits the detection performance and practical application of electrochemical sensors. Here, an electrochemical sensing platform was constructed by employing dual-responsive polyacrylamide/zinc finger peptide/Fe-MOF hydrogel (PZFH) as the silent layer, sodium alginate-Ni2+-graphene oxide hydrogel as the signal layer. GOx@ZIF-8, as the immunoprobe, catalyzed glucose to H2O2 and gluconic acid, resulting in the cleavage of immunoprobe as the pH decreased and subsequent release of Zn2+ ions. During the process of Fe-MOF converting from Fe3+ to Fe2+, free radicals were generated and used to destroy the structure of the PZFH. Cysteine and histidine in the zinc finger peptide can specifically bind to Zn2+ to create many pores in PZFH, exposing the signal layer. These synergistic effects rapidly decreased the impedance of PZFH and increased the electrochemical signal of Ni2+. The electrochemical sensing platform was used to detect pro-gastrin-releasing peptide with response times as short as 7 min of PZFH, a wide linear range from 100 ng mL-1 to 100 fg mL-1, and an ultra-low limit of detection of 14.24 fg mL-1 (S/N = 3). This strategy will provide a paradigm for designing electrochemical sensors.

Amplification of an Electrochemiluminescence-Emissive Aptamer into DNA Nanotags for Sensitive Fecal Calprotectin Determination

The precision additive manufacturing and tessellated multitasking out of the structural DNA nanotechnology enable a configurable expression of densified electrochemiluminescent (ECL) complexes, which would streamline the bioconjugation while multiplying signals. Herein, a completely DNA-scaffold ECL "polyploid" was replicated out via the living course of rolling circle amplification. The amplicon carried the aptameric sequences of ZnPPIX/TSPP porphyrin as photoreactive centers that rallied at periodical intervals of the persistent extension into a close-packed nanoflower, ZnPDFI/II. Both microscopies and electrophoresis proved the robust nesting of guests at their deployed gene loci, while multispectral comparisons among cofactor substituents pinpointed the pivotal roles of singlet seclusion and Zn2+-chelation for the sake of intensive ECL irradiation. The adversity-resilient hydrogel texture made lipoidal filmogens as porphyrinic ECL prerequisites to be of no need at all, thus not only simplifying assay flows but also inspiring an in situ labeling plan. Upon bioprocessing optimization, an enriched probe ZnPDFIII was further derived that interpolated the binding motif related to calprotectin as validated by molecular docking and affinity titration. With it being a strongly indicative marker of inflammatory bowel disease (IBD), a competitive ECL aptasensing strategy was contrived, managing a signal-on and sensitive detection in mild conditions with a subnanogram-per-milliliter limit of detection by 2 orders of magnitude lower than the standard method as well as a comparable accuracy in clinical stool sample testing. Distinct from those conventional chemophysical rebuilding routes, this de novo biosynthetic fusion demonstrated a promising alternative toward ECL-source bioengineering, which may intrigue vibrant explorations of other ECL-shedding fabrics and, accordingly, a new bioanalytic mode downstream.

A Photosensitized Singlet Oxygen (1O2) Toolbox for Bio-Organic Applications: Tailoring 1O2 Generation for DNA and Protein Labelling, Targeting and Biosensing

Singlet oxygen (1O2) is the excited state of ground, triplet state, molecular oxygen (O2). Photosensitized 1O2 has been extensively studied as one of the reactive oxygen species (ROS), responsible for damage of cellular components (protein, DNA, lipids). On the other hand, its generation has been exploited in organic synthesis, as well as in photodynamic therapy for the treatment of various forms of cancer. The aim of this review is to highlight the versatility of 1O2, discussing the main bioorganic applications reported over the past decades, which rely on its production. After a brief introduction on the photosensitized production of 1O2, we will describe the main aspects involving the biologically relevant damage that can accompany an uncontrolled, aspecific generation of this ROS. We then discuss in more detail a series of biological applications featuring 1O2 generation, including protein and DNA labelling, cross-linking and biosensing. Finally, we will highlight the methodologies available to tailor 1O2 generation, in order to accomplish the proposed bioorganic transformations while avoiding, at the same time, collateral damage related to an untamed production of this reactive species.

Porphyrin-Containing MOFs and COFs as Heterogeneous Photosensitizers for Singlet Oxygen-Based Antimicrobial Nanodevices

Visible-light irradiation of porphyrin and metalloporphyrin dyes in the presence of molecular oxygen can result in the photocatalytic generation of singlet oxygen (¹O₂). This type II reactive oxygen species (ROS) finds many applications where the dye, also called the photosensitizer, is dissolved (i.e., homogeneous phase) along with the substrate to be oxidized. In contrast, metal-organic frameworks (MOFs) are insoluble (or will disassemble) when placed in a solvent. When stable as a suspension, MOFs adsorb a large amount of O₂ and photocatalytically generate ¹O₂ in a heterogeneous process efficiently. Considering the immense surface area and great capacity for gas adsorption of MOFs, they seem ideal candidates for this application. Very recently, covalent-organic frameworks (COFs), variants where reticulation relies on covalent rather than coordination bonds, have emerged as efficient photosensitizers. This comprehensive mini review describes recent developments in the use of porphyrin-based or porphyrin-containing MOFs and COFs, including nanosized versions, as heterogeneous photosensitizers of singlet oxygen toward antimicrobial applications.

Functionalized europium-porphyrin coordination polymer: Rational design of high performance electrochemiluminescence emitter for mucin 1 sensing

The excellent characteristics of porphyrins have inspired widespread interest in electrochemiluminescence (ECL). However, the limited ECL intensity and poor stability of porphyrins in aqueous solution are still severely restricted further biological application. Here, we subtly synthesized a functionalized europium and 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin (TCPP) coordination polymer (Eu-PCP) by a one-step solvothermal method. In sharp contrast to the pristine TCPP, Eu-PCP showed a higher and more stable ECL red-light emission (673 nm) at low potential (-1.1 V, vs Ag/AgCl), which was 7.7-fold higher ECL intensity and 4.6-fold efficiency. In view of the crucial role of mucin 1 (MUC1) in tumor overexpression, it was selected as the target molecule. Combined with exonuclease III (Exo III)-assisted recycling amplification strategy, a ternary ECL biosensor was constructed for the MUC1 detection based on Eu-PCP as a satisfied ECL emitter, gold nanoparticles capped CeO₂ (CeO₂@Au) as the coreactant accelerator and peroxydisulfate as coreactant. Meanwhile, gold nanoparticles capped MnO₂ (MnO₂@Au) was used as the quenching probe to achieve a highly sensitive detection of MUC1. The proposed biosensor exhibited a wide linear range from 1 fg mL^-1 to 10 ng mL^-1 with a low limit of detection (0.32 fg mL^-1). By changing the corresponding target recognition DNA, this strategy could be expanded to detect other biomarkers.

Electrochemiluminescence-Repurposed Abiological Catalysts in Full Protein Tag for Ultrasensitive Immunoassay

Being announced as one of the "2019 Top Ten Emerging Technologies in Chemistry" by IUPAC, the directed evolution of artificial metalloenzymes has led to a broad scope of abiotic processes. Here, inspired by those key proteins in bioluminescence, a rudimentary expression of bio-electrochemiluminescent (ECL) macromolecules was achieved via the complexation of zinc proto-porphyrin IX (ZnPPIX) within apo-hemoglobin (apo-Hb). A high-yield monochromic irradiation at 644 nm could be provoked potentiostatically from the reconstituted holo-Hb^ZnPPIX in solutions. Its secondary structure integrity was elucidated by UV and circular dichroism spectrometry, while voltammetry-hyphenated surface plasmon resonance authenticated its ligation conservativeness in electrical fields. Further conjugation with streptavidin rendered a homogeneous Janus fusion of both receptor and reporter domains, enabling a new abiological catalyst-linked ECL bioassay. On the other hand, singular ZnPPIX inside each tetrameric subunit of Hb accomplished an overall signal amplification without the bother of luminogenic heterojunctions. This pH-tolerant and non-photobleaching optics was essentialized to be the unique configuration interaction between Zn and O₂, by which the direct electrochemistry of proteins catalyzed the transient progression of O₂ → O₂^·- → O₂* + hυ selectively. Such principle was implemented as a signal-on strategy for the determination of a characteristic cancer biomarker, the vascular endothelial growth factor, resulting in competent performance at a low detection limit of 0.6 pg·mL^-1 and a wide calibration range along with good stability and reliability in real practices. This simple mutation repurposed the O₂-transport Hb in the erythrocytes of almost all vertebrates into a cluster of oxidoreductases with intrinsic ECL activity, which would enrich the chromophore library. More importantly, its genetically engineered variants may come in handy in biomedical diagnosis and visual electrophysiology.

Switching the Photoluminescence and Electrochemiluminescence of Liposoluble Porphyrin in Aqueous Phase by Molecular Regulation

By a facile peripheral decoration of 5-(4-aminophenyl)-10,15,20-triphenylporphyrin (ATPP) with inherent aggregation-induced emission (AIE) active tetraphenylethene (TPE), a versatile AIEgenic porphyrin derivative (ATPP-TPE) was obtained, which greatly abolishes the detrimental π-π stacking and thus surmounts the notorious aggregation-caused quenching (ACQ) effect of ATPP in aqueous phase. The photoluminescence of ATPP-TPE is 4.5-fold stronger than ATPP at aggregation state. Moreover, an unequivocal aggregation induced electrochemiluminescence (AIECL) of ATPP-TPE was found to be seriously dependent on its aggregation property in aqueous solution with efficiency of 34 %, which is 6 times higher than pure ATPP. The versatility of this molecular structure modulation strategy along with the ACQ-to-AIE transformation in this work provides direction to guide for applying liposoluble porphyrins in aqueous phase by designs of synthetic porphyrin AIEgens.

Metal-organic frameworks-based sensitive electrochemiluminescence biosensing

Metal-organic frameworks (MOFs) as porous materials have attracted much attention in various fields such as gas storage, catalysis, separation, and nanomedical engineering. However, their applications in electrochemiluminescence (ECL) biosensing are limited due to the poor conductivity, lack of modification sites, low stability and specificity, and weak biocompatibility. Integrating the functional materials into MOF structures endows MOF composites with improved conductivity and stability and facilitates the design of ECL sensors with multifunctional MOFs, which are potentially advantageous over their individual components. This review summarizes the strategies for designing ECL-active MOF composites including using luminophore as a ligand, in situ encapsulation of luminophore within the framework, and post-synthetic modification. As-prepared MOF composites can serve as innovative emitters, luminophore carriers, electrode modification materials and co-reaction accelerators in ECL biosensors. The sensing applications of ECl-active MOF composites in the past five years are highlighted including immunoassays, genosensors, and small molecule detection. Finally, the prospects and challenges associated with MOF composites and their related materials for ECL biosensing are tentatively proposed.

A robust and efficient aqueous electrochemiluminescence emitter constructed by sulfonate porphyrin-based metal-organic frameworks and its application in ascorbic acid detection

The robust and strong electrochemiluminescence (ECL) emission of organic emitters in an aqueous solution is crucial for expanding their applications in early diagnosis. Herein, a Zn porphyrin-based metal-organic framework ((Zn)porphMOF) was facilely obtained by chelating Zn(ii)meso-tetra (4-sulfonatophenyl) porphine (Zn-TSPP) with Zn ions, showing substantially enhanced ECL radiation with K₂S₂O₈ as the coreactant via the "reduction-oxidation" route in aqueous media. In contrast with Zn-TSPP, (Zn)porphMOF displayed 22-fold increase in the ECL intensity because of the agglomeration effect. By virtue of the dramatic confinement towards the energy and electron transfer of ascorbic acid (AA) during the ECL process, an ultrasensitive biosensor was developed with a wide linear range (3.77 to 26.4 μM) and ultra-low detection limit of 0.29 μM at 3 times of the signal-to-noise ratio (3S/N). This work offers a feasible avenue to harvest the steady and boosted ECL responses of organic molecules in aqueous media, also greatly expanding the MOF applications in bioanalysis.

Highly Enhanced Electrochemiluminescence Luminophore Generated by Zeolitic Imidazole Framework-8-Linked Porphyrin and Its Application for Thrombin Detection

Novel and distinct enhancement in electrochemiluminescence (ECL) signals of advanced organic luminophores are of importance for expanding their applications in early diagnosis. This work reported the construction of an ultrasensitive label-free ECL aptasensor for thrombin (TB) detection by grafting zinc proto-porphyrin IX (ZnP) onto an aminated zeolitic imidazole framework-8 (defined as ZnP-NH-ZIF-8 for clarity) as the luminophore. The structure and optical properties of the resulting ZnP-NH-ZIF-8 were carefully characterized. For that, there appeared to be weak ECL radiation for ZnP in dichloromethane (DCM) containing tetra-n-butylammonium perchlorate (TBAP) because of the as-formed singlet-state oxygen via the "reduction-oxidation" route. More notably, the ECL signals display 153-times enhancement for ZnP-NH-ZIF-8, thanks to the excellent catalytic kinetics for the oxygen reduction reaction (ORR). By virtue of the specific interactions of the TB aptamer (TBA) with the TB protein and the highly efficient catalysis of the ZnP-NH-ZIF-8 for ORR, the as-prepared aptasensor showed a wider linear range (0.1 fM∼1 pM) and a lower detection limit (ca. 58.6 aM). This work provides some useful guidelines for synthesis of an advanced organic luminophore with largely boosted ECL signals in ultrasensitive analysis and clinical diagnosis.

Coreactant-Free Dual Amplified Electrochemiluminescent Biosensor Based on Conjugated Polymer Dots for the Ultrasensitive Detection of MicroRNA

Generally, electrochemiluminescence (ECL) assays are performed in the presence of a coreactant. The addition of the coreactant in the detection solution would make the ECL system lack sufficient stability. In the case of dissolved oxygen as the coreactant, the unknown concentration of dissolved O₂ would result in an inevitable error and a lack of reproducibility in detection. A coreactant-free ECL assay could overcome the above shortcomings and thus is an ideal choice. In this work, a coreactant-free dual amplified ECL strategy was constructed for ultrasensitive detection of microRNA (miRNA). Here, target-catalyzed hairpin assembly and enzyme-triggered DNA walker recycling amplification were integrated to achieve dual signal amplification. Carboxyl-functionalized poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-{2,1'-3}-thiadiazole)] (PFBT-COOH) dots were used as luminophores, which displayed prominent ECL performance without adding any coreactants and removing the dissolved O₂. As a result, the detection of miRNA was achieved, and the linear range was from 10 aM to 5 pM, and the detection limit was low to 3.3 aM. Meanwhile, the practicability of our biosensor was investigated by analyzing the expression of miRNA in cell lysates. The PFBT-COOH dots provided a great platform for constructing coreactant-free ECL biosensors and expanded the application of conjugated polymer dots in clinical analysis.

Enhanced electrochemiluminescent brightness and stability of porphyrins by supramolecular pinning and pinching for sensitive zinc detection

Ultrasensitive electrochemiluminescence (ECL) detection can benefit substantially from the rational configuration of emitter-enhancer stereochemistry. Here, using zinc(II) meso-5,10,15,20-tetra(4-sulfonatophenyl)porphyrin (ZnTSPP) as a model, we demonstrate that both the ECL intensity and the photostability of this emitter were significantly improved when it was trapped in pyridyl-bridged β-cyclodextrin dimer (Py(CD)₂); a synthetic enhancer that is ECL inactive. Through NMR characterization, we confirmed that ZnTSPP formed a clam-like inclusion complex involving pinning and pinching forces from the biocompatible container Py(CD)₂. Up to a threefold increase in the ECL brightness of ZnTSPP was witnessed when it was encapsulated in β-CD. Absorption and emission spectroscopic data revealed that both the extended excitation lifetime and the restricted mobility of the guest contributed to the observed improvement in signal transduction within the host molecule. This bioinspired entrapment also led to a marked boost in ECL stability. With the aid of the newly identified coreactant H₂O₂, the hollow TSPP@Py(CD)₂ system was employed to create a Zn²⁺-selective probe that was capable of sensitive and accurate zinc detection. The observed increase in ECL conversion and enhanced photophysical properties of this compact supramolecular assembly render it a novel template for enhancing ECL in analytical applications. Graphical abstract ᅟ.

Polyacrylamide Gel-Contained Zinc Finger Peptide as the "Lock" and Zinc Ions as the "Key" for Construction of Ultrasensitive Prostate-Specific Antigen SERS Immunosensor

In this work, we adopted polyacrylamide gel-contained zinc finger peptide (PZF) as a "lock" of Raman signal and zinc ions (Zn²⁺) as a sensitive "key", which was converted from target-captured ZnO NPs, to achieve the measurement of prostate-specific antigen (PSA). Owing to the lock effect from PZF, the surface-enhanced Raman scattering (SERS) tag toluidine blue (TB) connected on Ag NP-coating silica wafer was sheltered leading to low Raman response. Meanwhile, target PSA can specifically connect with antibody 2-coupled ZnO nanocomplexes (ZnO@Au@Ab₂) and antibody 1-coupled magnetic (CoFe₂O₄@Au@Ab₁) nanocomposite through sandwich immunoassay. In the presence of HCl, the ZnO NPs would convert into Zn²⁺ to open the PZF because Zn²⁺ can specifically react with zinc finger peptide to destroy the PZF structure forming abundant pores. In this way, Zn²⁺ could act as the key of Raman signal to open the PZF structure obtaining a strong Raman signal of TB. The proposed SERS sensor can have a quantitative detection of PSA within the range of 1 pg mL^-1 to 10 ng mL^-1 with a detection limit of 0.65 pg mL^-1. The interaction between zinc finger peptide and Zn²⁺ was firstly applied in SERS sensor for the sensitive detection of PSA. These results demonstrated that the new designed SERS biosensor could be a promising tool in biomarker diagnosis.

Enhanced Electrochemiluminescence of One-Dimensional Self-Assembled Porphyrin Hexagonal Nanoprisms

In this work, we synthesized the one-dimensional nanostructure of zinc 5,10,15,20-tetra(4-pyridyl)-21H,23H-porphine (ZnTPyP) via a self-assembly technique. Using sodium dodecyl sulfate (SDS) as "soft template", the self-assembled ZnTPyP (SA-ZnTPyP) had the morphology of hexagonal nanoprisms with a uniform size (diameter of 100 nm). The SA-ZnTPyP exhibited remarkably different spectral properties compared to those of the original ZnTPyP. The as-prepared SA-ZnTPyP was used to modify glassy carbon electrodes (GCE), and the electrochemiluminescence (ECL) behaviors of the SA-ZnTPyP/GCE were investigated. The hydrophilic carbon dots (C-dots) could efficiently prevent the dissolution of SA-ZnTPyP in DMF containing 0.1 mol L^-1 TBAP and, simultaneously, could accelerate electron transfer. Therefore, the enhanced ECL was realized by C-dots/SA-ZnTPyP/GCE by using H₂O₂ as co-reactant. This amplification of ECL was further studied by ECL spectroscopies and cyclic voltammetry, and the corresponding mechanism was proposed.

Construction of Three-Dimensional Hemin-Functionalized Graphene Hydrogel with High Mechanical Stability and Adsorption Capacity for Enhancing Photodegradation of Methylene Blue

A three-dimensional hemin-functionalized graphene hydrogel (Hem/GH) was prepared by a facile self-assembly approach. The as-prepared Hem/GH showed good mechanical strength with a storage modulus of 609-642 kPa and a high adsorption capacity to organic dye contaminants (341 mg g^-1 for rhodamine B). Moreover, Hem/GH could be used as a photosensitizer for the photocatalytic degradation of organic dyes and displayed superior photodegradation activity of methylene blue (MB). This result was better than that of counterparts such as graphene hydrogel (GH) and commercial catalyst P25. The excellent cycling performance of the Hem/GH was well maintained even after multiple cycles on adsorption process and photocatalytic reaction. Interestingly, after the photodegradation of MB, a light-induced pH change of the solution from alkaline pH 8.99 to acidic pH 3.82 was observed, and 10 wt % total organic carbon remained. The liquid chromatography/time-of-flight mass spectrometry (LC/TOF-MS) analysis confirmed the generation of acidic degradation products. The photocatalytic mechanism was further investigated by trapping experiments, which revealed that the MB degradation was driven mainly by the participation of O₂^•- radicals in the photocatalytic reaction. As an extended application, visually intuitive observation showed the as-prepared Hem/GH also had strong antibacterial properties. These results suggest that Hem/GH could be potentially used for practical application due to its high adsorption ability, excellent photocatalytic activity, and strong antibacterial properties.

Electro-Photodynamic Visualization of Singlet Oxygen Induced by Zinc Porphyrin Modified Microchip in Aqueous Media

A porphyrin-based electro-photodynamic imaging system was fabricated for monitoring the concentration of oxygen. Distinct from the electrochemiluminescent (ECL) inability of numerous organic species in aqueous solutions, a strong and stable red irradiation at 634 nm could be stimulated electrochemically on zinc(II) meso-tetra(4-carboxyphenyl) porphine (ZnTCPP)/tetraoctylammonium bromide (TOAB) in the physiological condition. In terms of in situ electron paramagnetic resonance and ECL spectroscopies, the nature of ECL was thoroughly investigated, being exactly the chemiluminescence from singlet oxygen (¹O₂) produced during the successive electro-reduction of ZnTCPP. Meanwhile, the excellent film-making capacity of amphiphilic TOAB as a potent ion barrier granted the luminophores a micro-order and patternable electrode modification. Such platform was exceptionally tolerant of pH variation, facilitating a durable solid-state ECL visualization under potentiostatic electrolysis and time exposure in the charge-coupled device (CCD) camera. For flow-injection and real-time detection, a chip-mounted microfluidic cell was customized and manufactured. A sensitive and simple vision-sensing of O₂ was further achieved with a real determination limit as low as a few micromolar level. The developed ECL imaging system is a good prototype and an eco-friendly technique in the cathodic range, and thus, it would supplement the primary anodic imaging library, showing great promise for multiplexed and colorimetric assays as well as oxygen-involved activity studies in the future.

Zirconium-Based Porphyrinic Metal-Organic Framework (PCN-222): Enhanced Photoelectrochemical Response and Its Application for Label-Free Phosphoprotein Detection

A simple and rapid photoelectrochemical (PEC) sensor was developed for the label-free detection of a phosphoprotein (α-casein) based on a zirconium based porphyrinic metal-organic framework (MOF), PCN-222, which exhibited an enhanced photocurrent response toward dopamine under the O₂-saturated aqueous media. In this work, in terms of PEC measurements and cyclic voltammetry, the PEC behaviors of PCN-222 in aqueous media were thoroughly investigated for the first time. Additionally, in the virtue of the steric hindrance effect from the coordination of the phosphate groups and inorganic Zr-O clusters as binding sites in PCN-222, this biosensor showed high sensitivity for detecting α-casein and the limit of detection (LOD) was estimated to be 0.13 μg mL^-1. Moreover, the proposed method provides a promising platform for clinic diagnostic and therapeutics.

Zirconium-metalloporphyrin frameworks as a three-in-one platform possessing oxygen nanocage, electron media, and bonding site for electrochemiluminescence protein kinase activity assay

A Zr-based metal-organic framework with zinc tetrakis(carboxyphenyl)-porphyrin (ZnTCPP) groups (MOF-525-Zn) was utilized to develop a novel electrochemiluminescence (ECL) biosensor for highly sensitive protein kinase activity assay. In this work, in terms of ECL measurements and cyclic voltammetry, the cathodic ECL behaviors of MOF-525-Zn in aqueous media were thoroughly investigated for the first time. The photoelectric active groups ZnTCPP on the MOF-525-Zn frameworks could promote the generation of singlet oxygen ((1)O2) via a series of electrochemical and chemical reactions, resulting in a strong and stable red irradiation at 634 nm. Additionally, the surfactant tetraoctylammonium bromide (TOAB) further facilitated dissolved oxygen to interact with the active sites ZnTCPP of MOF-525-Zn. Furthermore, the inorganic Zr-O clusters of MOF-525-Zn were simultaneously served as the recognition sites of phosphate groups. And then, an ultrasensitive ECL sensor was proposed for protein kinase A (PKA) activity detection with a linear range from 0.01 to 20 U mL(-1) and a sensitive detection limit of 0.005 U mL(-1). This biosensor can also be applied for quantitative kinase inhibitor screening. Finally, it exhibits good performance with high stability and acceptable fabrication reproducibility, which provide a valuable strategy for clinic diagnostics and therapeutics.