Dual-Emission of Lanthanide Metal–Organic Frameworks Encapsulating Carbon-Based Dots for Ratiometric Detection of Water in Organic Solvents

Biomass-derived multiatom-doped carbon dots for water sensing based on excited state intraparticle proton transfer in organic solvents

The presence of trace water impurities in organic solvents can significantly influence chemical reactions and product quality; thus, the accurate detection of water content in these solvents is a critical requirement for industrial applications. Accordingly, an eco-friendly, effective, and economical sensor for detecting trace quantities of miscible water in organic solvents is required for industrial applications. In this study, we synthesized biomass-derived multi-atom-doped carbon dots (MACDs) as fluorescent probes and employed them for the detection of trace amounts of water impurities in several water-miscible organic solvents. The MACDs exhibited stable dual-color fluorescence emission under ultraviolet light irradiation and red and blue emissions in organic solvents and water. The fluorescence quantum yield was approximately 11 %, which indicates an excited intraparticle proton transfer response due to an increase in the water content within a wide response range from 0 % to 100 % (v/v) in organic solvents. The intensity of the red emission signal at 670 nm gradually decreased with an increase in the water content in the organic solvent. The MACDs could detect water with an instant response time of 55 s, a high sensitivity, and low limits of detection of 0.08 %, 1.36 %, 0.03 %, 0.04 %, 0.12 %, and 0.05 % (v/v) in ethanol, acetonitrile, dimethylformamide, methanol, isopropanol, and tetrahydrofuran, respectively. Hence, biomass-derived MACDs can serve as efficient and eco-friendly water sensors in organic solvents.

Carbon dots for efficient detection of water content in organic solvents

The trace amount of water in organic solvents can affect the progress of chemical reactions, which will adversely affect chemical production in many industries, resulting in a doubling of costs. In this work, carbon dots (CDs) with abundant polar groups were synthesized by a simple one-step hydrothermal method. The prepared CDs showed superior dispersibility and fluorescence performance compared to the CDs that have been reported for the detection of water content in organic solvents. It can realize the fluorescence detection of trace water in several water-soluble organic solvents such as N,N-dimethylformamide, ethanol and methanol with wide linear range (0 %-100 %) and high sensitivity. This will provide a powerful tool for the rapid detection of water content in organic solvents in chemical production.

The design, synthesis and application of metal-organic framework-based fluorescence sensors

Fluorescence-based chemical sensors have garnered significant attention due to their rapid response, high sensitivity, cost-effectiveness and ease of operation. Recently, metal-organic frameworks (MOFs) have been extensively utilized as platforms for constructing fluorescence sensors, owing to their ultra-high porosity, flexible tunability, and excellent luminescent properties. This feature article summarizes the progress made mainly by our research group in recent years in the construction strategies, principles, and types of MOF sensors, as well as their applications in quantitative sensing, qualitative identification analysis, and multimodal/multifunctional analysis. In addition, the challenges and an outlook on the future progression of MOF-based sensors are discussed, highlighting how these studies can contribute to addressing these issues. Hopefully, this feature article can provide some valuable guidance for the construction and application of MOFs in fluorescence sensing, thereby broadening their practical applications.

Advances on fluorescence chemosensors for selective detection of water

Water, although an important part of everyday life, is acts as one of the most significant contaminants in various applications such as biomedical monitoring, chemical production, petroleum-based fuel and food processing. In fact, the presence of water in other solvents is a huge concern. For the quantification of trace water content, different methods such as Karl-Fischer, electrochemical, nuclear magnetic resonance, chromatography, and thermogravimetric analysis have been used. Although every technique has its own benefit, each one suffers from several drawbacks that include high detection costs, lengthy procedures and specialized operations. Nowadays, the development of fluorescence-based chemical probes has become an exciting area of research for the quick and accurate estimation of water content in organic solvents. A variety of chemical processes such as hydrolysis reaction, metal ions promoted oxidation reaction, suppression of the -C═N isomerization, protonation and deprotonation reactions, and molecular aggregation have been well researched in the last few years for the fluorescent detection of trace water. These chemical processes eventually lead to different photophysical events such as aggregation-induced emission (AIE), aggregation-induced emission enhancement (AIEE), aggregation-caused quenching (ACQ), fluorescent resonance energy transfer (FRET), charge transfer, photo-induced electron transfer (PET), excited state intramolecular proton transfer (ESIPT) that are responsible for the detection. This review presents a summary of the fluorescence-based chemosensors reported in recent years. The design of water sensors, sensing mechanisms and their potential applications are reviewed and discussed.

Metal-organic framework (MOF)/C-dots and covalent organic framework (COF)/C-dots hybrid nanocomposites: Fabrications and applications in sensing, medical, environmental, and energy sectors

Developing new hybrid materials is critical for addressing the current needs of the world in various fields, such as energy, sensing, health, hygiene, and others. C-dots are a member of the carbon nanomaterial family with numerous applications. Aggregation is one of the barriers to the performance of C-dots, which causes luminescence quenching, surface area decreases, etc. To improve the performance of C-dots, numerous matrices including metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and polymers have been composited with C-dots. The porous crystalline structures, which are constituents of metal nodes and organic linkers (MOFs) or covalently attached organic units (COFs) provide privileged features such as high specific surface area, tunable structures, and pore diameters, modifiable surface, high thermal, mechanical, and chemical stabilities. Also, the MOFs and COFs protect the C-dots from the environment. Therefore, MOF/C-dots and COF/C-dots composites combine their features while retaining topological properties and improving performances. In this review, we first compare MOFs with COFs as matrices for C-dots. Then, the recent progress in developing hybrid MOFs/C-dots and COFs/C-dots composites has been discussed and their applications in various fields have been explained briefly.

A pH-regulated fluorescence covalent organic framework for quantitative water content detection in methanol

In this paper, we designed and synthesized a two-dimensional fluorescent covalent organic framework (TAPB-DMTP-COF) for the precise determination of H2O content in methanol. The COF was synthesized using two typical monomers by grinding method, which significantly reduced the synthesis time. By adjusting the pH value of the COF suspension to 4.0, the portion of the COF material structure is disrupted, thereby mitigating π-π stacking and resolving the aggregation-caused quenching (ACQ) effect. Consequently, the non-fluorescent TAPB-DMTP-COF exhibited blue-purple fluorescence emission in methanol. At the same time, it is observed that in the presence of H2O, there is a red shift in the maximum fluorescence emission peak of TAPB-DMTP-COF, which correlates with the H2O content within a specific range. Notably, this redshift demonstrates a linear relationship with H2O content from 4% to 80% in methanol. Our work presents novel insights for efficient analysis and detection of H2O content in methanol and could be used for H2O detection in other organic solvents.

The construction of dual-emissive ratiometric fluorescent probes based on fluorescent nanoparticles for the detection of metal ions and small molecules

With the rapid development of fluorescent nanoparticles (FNPs), such as CDs, QDs, and MOFs, the construction of FNP-based probes has played a key role in improving chemical sensors. Ratiometric fluorescent probes exhibit distinct advantages, such as resistance to environmental interference and achieving visualization. Thus, FNP-based dual-emission ratiometric fluorescent probes (DRFPs) have rapidly developed in the field of metal ion and small molecule detection in the past few years. In this review, firstly we introduce the fluorescence sensing mechanisms; then, we focus on the strategies for the fabrication of DRFPs, including hybrid FNPs, single FNPs with intrinsic dual emission and target-induced new emission, and DRFPs based on auxiliary nanoparticles. In the section on hybrid FNPs, methods to assemble two types of FNPs, such as chemical bonding, electrostatic interaction, core satellite or core-shell structures, coordination, and encapsulation, are introduced. In the section on single FNPs with intrinsic dual emission, methods for the design of dual-emission CDs, QDs, and MOFs are discussed. Regarding target-induced new emission, sensitization, coordination, hydrogen bonding, and chemical reaction induced new emissions are discussed. Furthermore, in the section on DRFPs based on auxiliary nanoparticles, auxiliary nanomaterials with the inner filter effect and enzyme mimicking activity are discussed. Finally, the existing challenges and an outlook on the future of DRFP are presented. We sincerely hope that this review will contribute to the quick understanding and exploration of DRFPs by researchers.

A dynamic Eu(III)-macrocycle served as the turn-on fluorescent probe for distinguishing H2O from D2O

H2O and D2O are an important pair of analogues, and their high-efficient detections are closely related to fields of chemical industry, food processing, semiconductor, environmental monitoring, etc. Because of their extremely similar physical and chemical properties, H2O and D2O can be mutually soluble in any ratios, and it is generally thought that the discrimination of H2O and D2O is an enormous challenge. Herein, upon the fact that vibrational frequency of O-H is greater than O-D, we design a dynamic Eu(III)-macrocycle Eu-2a with two emitters which exhibits the imine bond breakage of macrocycle emitter H2L2a in H2O or D2O, resulting in the turn-on fluorescence of Eu(III) emitter. For their differential fluorescence sensing signals of Eu-2a on three emission bands (433, 500 and 615 nm), the statistical analysis method is employed to produce fully separated fingerprints and thus high-throughput discrimination of 13 common solvents, especially the H2O and D2O. Fluorescent titration experiments by instrumental or smartphone-based analysis method also prove the successful determination of proportional H2O/D2O mixtures together with the good sensitivity and wide linear response range. Moreover, this H2O-triggered fluorescent complex Eu-2a used as the fluorescence ink also shows its potential in information encryption application. This article must be a valuable reference for the areas of lanthanide-based luminescent material, multianalyte detection and information encryption.

Facile synthesis of S, N-co-doped carbon dots for bio-imaging, Fe3+ detection and DFT calculation

Turning waste into wealth, herein, two highly fluorescent N and S co-doped carbon dots (N, S-CDs-A and N, S-CDs-B) were synthesized by the hydrothermal reaction of contaminant reactive red 2 (RR2) and L-cysteine or L-methionine, respectively. The detailed morphology and structure of N, S-CDs were characterized by XRD, Raman spectrum, FTIR spectra, TEM, HRTEM, AFM and XPS. The maximum fluorescent of N, S-CDs-A and N, S-CDs-B are 565 and 615 nm under different excitation wavelengths with moderate fluorescence intensity of 14.0 % and 6.3 %, respectively. The microstructure models of N, S-CDs-A and N, S-CDs-B, which were induced by FT-IR, XPS and element analysis, had been applied in DFT calculation. The result indicated that the doping of S and N is beneficial to obtain the red-shift of fluorescent spectra. Both N, S-CDs-A and N, S-CDs-B showed highly sensitive and selective to Fe3+. N, S-CDs-A can also detect Al3+ ion with high sensitivity and selectivity. Finally, N, S-CDs-B was successfully applied in cell imaging.

Yellow Carbon Dots for Fluorescent Water Sensing, Relative Humidity Sensing, and Anticounterfeiting Applications

Most fluorescent probes based on carbon dots (CDs) fluorescence color or intensity change are still used for detection in solution, but in practical fluorescence detection applications, detection in the solid state is necessary. Therefore, a CDs-based fluorescence sensing device is designed in this paper, which can be used for water detection in liquid and solid states. Using oPD as a single precursor, yellow fluorescent CDs (y-CDs) were prepared by hydrothermal method, which can be used in the field of water detection and anti-counterfeiting by using its solvent-sensitive properties. First, y-CDs can be used to visually and intelligently detect the water content in ethanol. Secondly, it can be used to detect the Relative Humidity (RH) of the environment by combining it with cellulose to form a fluorescent film. Finally, y-CDs can also be used as a fluorescent material for fluorescence anti-counterfeiting.

Lanthanide Metal-Organic Framework Isomers with Novel Water-Boosting Lanthanide Luminescence Behaviors

Lanthanide metal-organic frameworks (Ln-MOFs) with exceptional optical performance and structural diversity offer a unique platform for the development of luminescent materials. However, Ln-MOFs often suffer from luminescence quenching by high-vibrating oscillators, especially in aqueous solution. Thus, multiple strategies have been adopted to improve the luminescence of Ln3+. Anomalous research about water-induced lanthanide luminescence enhancement of Ln-MOFs is in the primary stage. Here, two Eu-based metal-organic framework (Eu-MOF) isomers named QXBA-Eu-1 and QXBA-Eu-2 were constructed by using the same ligand under different solvent thermal conditions, which exhibited distinctive water- and methanol-boosting emission behaviors. As for QXBA-Eu-1, water and methanol molecules replaced the free N,N-dimethylacetamide (DMA) molecules in the framework, repressed the rotation or libration suppression of the QXBA linker, and formed hydrogen bonds with the coordinated water molecules, which suppressed the O-H high-energy vibrations, reduced nonradiative transitions, stabilized the T1 state, and facilitated the intersystem crossing (ISC) process. For QXBA-Eu-2, water molecules tended to replace the coordinated DMA ligands, which altered the S1 and T1 energy levels of the ligand and facilitated the ligand-to-metal energy transfer (LMET) process and strengthened the luminescence of Eu3+. Importantly, free solvent molecules and the hydroxylation of Eu3+ centers also restrained the rotation or libration of the QXBA linker, by which the nonradiative transition was further inhibited and the lanthanide luminescence enhanced. Thus, this work not only opened an unprecedented path to enhance lanthanide luminescence in aqueous solution but also expanded its application scope.

Synergistic luminescence effect and high-pressure optical properties of CsPbBr2Cl@EuMOFs nanocomposites

Metal-organic frameworks (MOFs) are a class of highly porous materials that have garnered significant attention in the field of optoelectronics due to their exceptional properties. In this study, CsPbBr₂Cl@EuMOFs nanocomposites were synthesized using a two-step method. The fluorescence evolution of the CsPbBr₂Cl@EuMOFs was investigated under high pressure, revealing a synergistic luminescence effect between CsPbBr₂Cl and Eu³⁺. The study found that the synergistic luminescence of CsPbBr₂Cl@EuMOFs remains stable even under high pressure, and there is no energy transfer among different luminous centers. These findings provide a meaningful case for future research on nanocomposites with multiple luminescent centers. Additionally, CsPbBr₂Cl@EuMOFs exhibit a sensitive color-changing mechanism under high pressure, making them a promising candidate for pressure calibration via the color change of the MOF materials.

Novel Lanthanide-Based Metal-Organic Framework Isomer as a Double Ratiometric Fluorescent Probe for Vanillymandelic Acid

The concentration of vanillymandelic acid (VMA) in urine is closely related with pheochromocytoma diagnosis. Thus, it is essential to develop more accurate and convenient fluorescence sensing strategies toward VMA. Until now, the design of double ratiometric detection methods for VMA was still in the unexplored stage. In this work, novel Ln³⁺-based metal-organic frameworks (QBA-Eu and QBA-Gd_0.875Eu_0.125) possessing dual emission peaks was fabricated successfully, which served as isomers of YNU-1 and exhibited more excellent water stability in fluorescence and structure than the ones of YNU-1. The formation of the complex between QBA ligands and VMA molecules via hydrogen bonds within QBA-Eu frameworks produced a new emission band centered at 450 nm and resulted in the decline of monomer emission intensity for QBA at 390 nm. Owing to the reduced energy gap [ΔE (S₁ - T₁)], the antenna effect was hampered and luminescence of Eu³⁺ ions also decreased. The developed double ratiometric (I_615nm/I_475nm, I_390nm/I_475nm) fluorescence sensors based on QBA-Eu and QBA-Gd_0.875Eu_0.125 possessed the advantages of fast response (4 min), low detection limits (0.58 and 0.51; 0.22 and 0.31 μM), and wide linear ranges (2-100 and 2-80 μM), which met the requirements of pheochromocytoma diagnosis. We also applied them to determine VMA in an artificial urine sample and diluted human urine sample and obtained satisfactory results. They will become prospective fluorescence sensing platforms for VMA.

A MOF-on-MOF composite encapsulating sensitized Tb(III) as a built-in self-calibrating fluorescent platform for selective sensing of F ions

The establishment of simple and sensitive detection methods for fluoride ion (F^-) is of great importance for its effective prevention and control, and metal-organic framework (MOF) has attracted much attention for sensing applications due to its high surface areas and tunable structures. Herein, we successfully synthesized a fluorescent probe for ratiometric sensing of F^- by encapsulating sensitized Tb³⁺ in a MOF-on-MOF material (UIO66/MOF801, with the formula of C₄₈H₂₈O₃₂Zr₆ and C₂₄H₂O₃₂Zr₆, respectively). We found that Tb³⁺@UIO66/MOF801 can be used as a built-in fluorescent probe for fluorescence-enhanced sensing of F^-. Interestingly, the two fluorescence emission peaks of Tb³⁺@UIO66/MOF801 at 375 nm and 544 nm exhibit different fluorescence responses to F^- under excitation at 300 nm. The 544 nm peak is sensitive to F^-, while the 375 nm peak is insensitive to it. Photophysical analysis indicated that the photosensitive substance was formed, which promotes the absorption of 300 nm excitation light by the system. Self-calibrating fluorescent detection of F^- was achieved due to the unequal energy transfer toward the two different emission centers. The detection limit of Tb³⁺@UIO66/MOF801 for F^- was 4.029 μM, which is far lower than the WHO guideline for drinking water. Moreover, the ratiometric fluorescence strategy showed a high concentration tolerance of interference, because of its inner-reference effect. This work highlights the high potential of lanthanide ion encapsulated MOF-on-MOF as environmental sensors, and offers a scalable way for construction of the ratiometric fluorescence sensing systems.

Antibacterial Carbon Dots-Based Composites

The emergence and global spread of bacterial resistance to conventionally used antibiotics have highlighted the urgent need for new antimicrobial agents that might replace antibiotics. Currently, nanomaterials hold considerable promise as antimicrobial agents in anti-inflammatory therapy. Due to their distinctive functional physicochemical characteristics and exceptional biocompatibility, carbon dots (CDs)-based composites have attracted a lot of attention in the context of these antimicrobial nanomaterials. Here, a thorough assessment of current developments in the field of antimicrobial CDs-based composites is provided, starting with a brief explanation of the general synthesis procedures, categorization, and physicochemical characteristics of CDs-based composites. The many processes driving the antibacterial action of these composites are then thoroughly described, including physical destruction, oxidative stress, and the incorporation of antimicrobial agents. Finally, the obstacles that CDs-based composites now suffer in combating infectious diseases are outlined and investigated, along with the potential applications of antimicrobial CDs-based composites.

Coordination polymer nanoprobe integrated carbon dot and phenol red for turn-on fluorescence detection of urease activity

The potential of coordination polymers (CPs) as a host of integrating multiple guest species to construct a fluorescence resonance energy transfer (FRET) nanoprobe was demonstrated. The ZnCPs built from zinc(II) and adenine was employed as a model of CPs to integrate carbon dot (CD) and phenol red (PR) for producing the FRET nanoprobe (CD/PR@ZnCPs). Benefiting from the confinement effect of ZnCPs, the integrated CD and PR can be brought in close proximity to favor the occurrence of FRET process from CD to PR, which leads to the quenching of CD fluorescence. However, the FRET process was disrupted upon the red-shift of PR absorption from 428 to 562 nm in alkaline medium, and consequently switches on the fluorescence of CD/PR@ZnCPs. Based on this finding, by utilizing urease to hydrolyze urea and mediate medium pH, a turn-on fluorescent method was established for the detection of urease activity. This fluorescent method has a linear response that covers 5 to 150 U/L urease with a detection limit of 0.74 U/L and exhibits an excellent selectivity over other enzymes. The successful determination of urease in saliva samples demonstrates the applicability of the fluorescent nanoprobe in complex biological matrix.

High-Performance Turn-On Fluorescent Metal-Organic Framework for Detecting Trace Water in Organic Solvents Based on the Excited-State Intramolecular Proton Transfer Mechanism

Simple, fast, and sensitive detection of trace water in organic solvents is an urgent requirement for chemical industries. Herein, combining the unusual excited-state intramolecular proton transfer (ESIPT) mechanism with the effective strategy of pore space partition, for the first time, we construct a powerful fluorescent metal-organic framework (SNNU-301) probe with excellent water stability. The SNNU-301 probe shows a remarkable performance for turn-on ESIPT-based fluorescence response to water in nine common organic solvents, exhibiting wide linear ranges, low limit of detection values, and ultrafast response, especially in dimethyl sulfoxide (0-5.2%; 0.011%, v/v; 110 s). The typical ESIPT-sensitive linker 2,5-dihydroxyterephthalate (DHBDC) imparts it with discriminative detection properties via enol-keto tautomerism, and light-responsive triangular tri(pyridin-4-yl)-amine (TPA) realizes pore space partition. The theoretical calculation gives an in-depth explanation about the proton transfer mechanism. Comparative experiments and GCMC simulation provide evidence that the synergy of the ESIPT process and TPA of the framework further boosts its performance effectively. Definitely, this work not only offers a promising candidate with fast detection speed, high sensitivity, excellent universality, and visual observation for the determination of water in organic solvents but also provides valuable guidance for the design of high-performance fluorescent probes.

Recent research progress in CDs@MOFs composites: fabrication, property modulation, and application

Carbon dots (CDs) have exhibited a promising application prospect in many fields because of their good fluorescence properties, biocompatibility, low toxicity, and easy functionalization. In order to improve their photoelectricity and stability, metal-organic frameworks (MOFs) can be used as host materials to provide ideal carriers for CDs to realize the multifunctional composites of CDs and MOFs (CDs@MOFs). At present, CDs@MOFs composites have shown tremendous application potential because they have various advantages of both CDs and MOFs. In this review, the synthesis methods of CDs@MOFs composites are firstly introduced. Then, the influence of the synergy between CDs and MOFs on the regulation of their structures and optical properties is highlighted. Furthermore, the recent application researches of CDs@MOFs composites in fluorescent probes, solid-state lighting, and photoelectrocatalysis are generalized. Finally, the critical issues, challenges, and solutions on their structure and property regulation and application are put forward, and their commercialization direction is also prospected.

Humidity Sensors Based on Metal-Organic Frameworks

Humidity sensors are important in industrial fields and human activities. Metal-organic frameworks (MOFs) and their derivatives are a class of promising humidity-sensing materials with the characteristics of a large specific surface area, high porosity, modifiable frameworks, and high stability. The drawbacks of MOFs, such as poor film formation, low electrical conductivity, and limited hydrophilicity, have been gradually overcome with the development of material science. Currently, it is moving towards a critical development stage of MOF-based humidity sensors from usability to ease of use, of which great challenges remain unsolved. In order to better understand the related challenges and point out the direction for the future development of MOF-based humidity sensors, we reviewed the development of such sensors based on related published work, focusing on six primary types (impedance, capacitive, resistive, fluorescent, quartz crystal microbalance (QCM), and others) and analyzed the sensing mechanism, material design, and sensing performance involved, and presented our thoughts on the possible future research directions.

Metal-Organic Framework with Near-Infrared Luminescence for "Switch-on" Determination of Kaempferol and Quercetin by the Antenna Effect

The establishment of a reliable and sensitive method for the detection of flavonoids, such as kaempferol (Kae) and quercetin (Que), is important and challenging in food chemistry and pharmacology because numerous structural analogues may interfere with the detection. Until now, designing an efficient switch-on fluorescence sensing strategy for Kae and Que was still in the unachievable stage. In this work, a switch-on near-infrared (NIR) luminescence sensing assay for Kae and Que was fabricated based on a metal-organic framework (MOF) called IQBA-Yb for the first time. The fluorescence enhancing mechanism was that analytes served as additional "antenna" of Yb³⁺, leading to the efficient switch-on NIR emission under excitation at 467 nm. Meanwhile, the combination results of experiment and theoretical calculation revealed that there existed hydrogen bonds between Kae, Que, and the MOF skeleton, further promoting the energy transfer between the analyte and Yb³⁺ and facilitating fluorescence enhancement response. The developed probe possessed excellent sensing capability for Kae and Que, accompanied by a wide linear range (0.04-70, 0.06-90 μM), low detection limit (0.01, 0.06 μM), and short response time (20 min, 6 min), which was used to determine the Kae and Que contents in Green Lake and eatable Que samples with satisfactory results.

Sensing performance and mechanism of carbon dots encapsulated into metal-organic frameworks

Metal-organic frameworks (MOFs) can be combined with nanomaterials and the combined composites have excellent optical properties. Carbon dots (CDs) with tiny particle size, non-toxic and rich surface functional groups are novel fluorescent materials. Carbon dots@metal-organic frameworks (CDs@MOFs) are synthesized by encapsulating CDs into MOFs. CDs@MOFs are promising composites for the preparation of a new generation of fluorescence sensors, which combine the hybrid properties of MOFs and the special optical properties of CDs. Urged as such, we are encouraged to categorize according to the sensing mechanisms. These include fluorescence resonance energy transfer (FRET), aggregation-caused quenching (ACQ), static quenching, dynamic quenching, photo-induced electron transfer (PET), inner filter effect (IFE) and so on. Based on the above mechanisms, CDs@MOFs can specifically interact with target analytes to generate fluorescence quenching. This review covers the research progress of CDs@MOFs in recent five years (with 103 refs), synthetic design of CDs@MOFs and introduces the sensing mechanism. The current challenges and future research directions are discussed briefly. The sensing mechanism and applications of CDs@MOFs.

Determination of water in organic solvents and raw food products by fluorescence quenching of a crystalline vinyl-functionalized COF

Covalent organic frameworks (COFs) with good chemical stability, flexible chemical functionalization, tunable pore sizes, and high specific surface areas have been increasingly employed in the field of fluorescence sensing. In this work, a crystalline vinyl-functionalized COF TzDa-V was facilely prepared through a room-temperature synthetic method via condensation reaction between 4,4',4″-(1,3,5-triazine-2,4,6-triyl)trianiline (Tz) and 2,5-diallyloxyterephthalaldehyde (Da-V). The intermolecular charge transfer (ICT) effect endowed the TzDa-V with fluorescence characteristic, and it was sensitive to trace water and can be quenched due to the disruption of ICT process by water. On this base, the prepared COF TzDa-V with excellent chemical/thermal stability was applied to sensing of trace water in common organic solvents such as DMF, acetone, THF, and ethyl acetate with rapid response (less than 10 s), satisfactory sensing range (0.5-18% water in DMF, 0.5-15% water in acetone, 0.5-16% water in THF, 0.5-5% in ethyl acetate, v/v), and high sensitivity. The limits of detection for water in DMF, acetone, THF, and ethyl acetate were 0.0497%, 0.0590%, 0.0502%, and 0.0766% (v/v), respectively. The proposed probe was successfully used for the detection of trace water in food products such as salt and sugar. The COF TzDa-V would be a good candidate for application in water sensing.

Reversible fluorescent test strip with red fluorescent carbon dots for monitoring water in organic solvents: Visual detection via a smartphone

Herein, a novel type of red-emitting carbon dots called TN-CDs was created via a one-step hydrothermal approach using neutral red and tartaric acid as raw materials. The fluorescence of TN-CDs was gradually quenched as the amount of water increased, and the color of the solution changed from yellow to pink mauve (or purple to pink). The reaction could be completed within only 5 s in various organic solvents such as N,N-Dimethylformamide (DMF), methanol (MeOH), acetonitrile (ACN), and ethanol (EtOH) with linear detection ranges of 1.2%-35.0%, 0.5%-20.0%, 0.25%-5.0% and 0%-16.0%, respectively. In addition, we prepared a reusable test strip and then combined it with TN-CDs to detect water content in DMF, as well as integrated it with smartphone software, a UV lamp, and a dark chamber for real-time, on-site, visual quantitative detection of the water content.

Detection and Sorption of Heavy Metal Ions in Aqueous Media by a Fluorescent Zr(IV) Metal-Organic Framework Functionalized with 2-Picolylamine Receptor Groups

Increasing global environmental pollution due to heavy metal ions raises the importance of research on new multifunctional materials for simultaneous detection and removal of these contaminants from water resources. In this study, we report a microporous 8-connected Zr⁴⁺ metal-organic framework (MOF) based on a terephthalate ligand decorated with a chelating 2-picolylamine side group (dMOR-2), which shows highly efficient fluorescence sensing and sorption of heavy metal cations. We demonstrate by detailed fluorescence studies the ability of a water-dispersible composite of dMOR-2 with polyvinylpyrrolidone for real-time detection of Cu²⁺, Pb²⁺, and Hg²⁺ in aqueous media. The limits of detection were found to be below 2 ppb for these species, while the system's performance is not affected by the presence of other potentially competitive ions. In addition, sorption studies showed that a composite of dMOR-2 with calcium alginate (dMOR-2@CaA) is an excellent sorbent for Pb²⁺ and Cu²⁺ ions with capacities of 376 ± 15 and 117 ± 4 mg per gram of dMOR-2@CaA, respectively, while displaying the capability for simultaneous removal of various heavy metal ions in low initial concentrations and in the presence of large excesses of other cationic species. Structural and spectroscopic studies with model ligands analogous to our material's receptor unit showed chelation to the 2-picolylamine moiety to be the main binding mode of metal ions to dMOR-2. Overall, dMOR-2 is shown to represent a rare example of a MOF, which combines sensitive fluorescence detection and high sorption capacity for heavy metal ions.

Dual-emitting metal-organic frameworks for ratiometric fluorescence detection of fluoride and Al3+ in sequence

Fluoride (F^-) and Al³⁺ are two common ions existing in drinking water and natural water bodies. Excessive intake of F^- can lead to serious health issues such as fluorosis and bone diseases while accumulated consumption of Al³⁺ may cause neurotoxicity-based diseases. Developing a fast, reliable, and sensitive sensor for visually detecting both F^- and Al³⁺ is of great significance. In the present work, a ratiometric fluorescence sensor was constructed by incorporating rhodamine B (RhB) in situ into a zirconium-based metal-organic framework, UiO-66-NH₂. The obtained nanocomposite UiO-66-NH₂@RhB exhibited similar octahedral structure to UiO-66-NH₂ with high BET surface area, and showed two emission peaks at 450 nm and 585 nm. The blue fluorescence from UiO-66-NH₂ was enhanced by the addition of F^- while subsequent Al³⁺ addition diminished the increased fluorescence intensity, and the red emission from RhB as the reference remained unchangeable to improve the detection precision. Under optimal conditions, detection of limits as low as 1.55 μM for F^- and 0.54 μM for Al³⁺ in aqueous solution were achieved with good selectivity. High recoveries in drinking water samples were also acquired, showing potential applications of this ratiometric fluorescence sensor for practical evaluation of F^- and Al³⁺.

Subtle Ligand Spacer Change in 2D Metal-Organic Framework Sheets for Dual Turn-On/Turn-Off Sensing of Acetylacetone and Turn-On Sensing of Water in Organic Solvents

Metal-organic framework (MOF)-based sensors for the detection of various analyte molecules has been a subject of absolute importance. However, most of these sensors rely on the turn-off (quenching) transduction response, while those reporting turn-on response are very rare. In this article, we have synthesized two new MOF-based sensors, {[Zn₂(oxdz)₂(tpbn)]·14H₂O}_n (1) and {[Zn₂(oxdz)₂(tpxn)]·10H₂O·2C₂H₅OH}_n (2), via the self-assembly of Zn(II) metal ions, a fluorogenic oxdz^2- linker, and bis(tridentate) ligands (tpbn and tpxn) under ambient conditions. Their formation from such a self-assembly process has been evaluated on the basis of the geometry around the five-coordinated Zn(II), preferential meridional binding of the bis(tridentate) ligands, and diverse binding of the carboxylate groups in oxdz^2-. Although 1 and 2 are isostructural, a difference in the transduction mechanism for the sensing of acetylacetone in organic solvents (turn-on for 1 and turn-off for 2) is observed and can be attributed to the spacer in the bis(tridentate) ligands. We have demonstrated the competing effect of the nonradiative interactions and photoinduced electron transfer toward the sensing mechanism. The results are well-supported by the Fourier transform infrared spectroscopy study, intensity versus concentration plots, spectral overlap measurements, time-resolved fluorescence studies, and MM2 and density functional theory calculations. Furthermore, we have showcased the utilization of 1 for the sensing of trace amounts of water in organic solvents.

A novel ratiometric fluorescent probe for detection of l-glutamic acid based on dual-emission carbon dots

In this article, we report for the first time the use of a dual-emission carbon dots (CDs) with orange-yellow fluorescence for the detection of l-glutamic acid (L-Glu). The CDs was synthesized through a facile strategy of one-pot hydrothermal route using o-phenylenediamine (oPD) and oxalic acid. The CDs exhibit two fluorescence emission peaks around 453 nm and 560 nm when the excitation wavelength is at 390 nm. In the existence of L-Glu the fluorescence at 560 nm was decreased, whereas the fluorescence at 453 nm was constant. The fluorescence intensity ratio at 560 nm and 453 nm (F₅₆₀/F₄₅₃) expressed two great linear relationships in the L-Glu concentration range from 0 to 200 μM and 200-400 μM, respectively, with a detection limit (LOD) of about 0.085 μM. In addition, it was used to analyze L-Glu in fetal bovine serum samples successfully, which recoveries were ranging from 97.07 to 103.7%. Those results demonstrate CDs can be further explored in biomedicine studies.

Multi-Emission from Single Metal-Organic Frameworks under Single Excitation

Multi-emission materials have come to prominent attention ascribed to their extended applications other than single-emission ones. General and robust design strategies of a single matrix with multi-emission under single excitation are urgently required. Metal-organic frameworks (MOFs) are porous materials prepared with organic ligands and metal nodes. The variety of metal nodes and ligands makes MOFs with great superiority as multi-emission matrices. Guest species encapsulated into the channels or pores of MOFs are the additional emission sites for multi-emission. In this review, multi-emission MOFs according to the different excitation sites are summarized and classified. The emission mechanisms are discussed, such as antenna effect, excited-state intramolecular proton transfer (ESIPT) and tautomerism for dual-emission. The factors that affect the emissions are revealed, including ligand-metal energy transfer and host-guest interaction, etc. Multi-emission MOFs could be predictably designed and prepared, once the emissive factors are controlled rationally in combination with the different multi-emission mechanisms. Correspondingly, new and practical applications are realized, including but not limited to ratiometric/multi-target sensing and bioimaging, white light-emitting diodes, and anti-counterfeiting. The design strategies of multi-emission MOFs and their extensive applications are reviewed. The results will shed light on other multi-emission systems to develop the structure-derived functionality and applications.

Carbon dots with aggregation induced quenching effect and solvatochromism for the detection of H2O in organic solvents

In this work, a type of carbon dots (CDs) which can be well dispersed in organic solvents but precipitated in neutral aqueous solution was synthesized by using one-step hydrothermal heating treatment of o-phenylenediamine in H₂SO₄ solution. Although the emissions of the CDs in different organic solvents are excitation independent, solvatochromism is observed for the CDs since the emission wavelength is red shifted with an increase in the polarity of solvents. The optical properties suggest that the emission of the CDs is controlled by molecular state. According to aggregation induced quenching effect and solvatochromism caused by an increase in the solvent polarity with the content of H₂O increasing, detection methods of H₂O in the organic solvents were developed by using the CDs as a probe. The spiked H₂O in acetone and methanol could be recovered in the range of 98.2% to 101.7%, which indicates that the as-proposed method has a high potential for the determination of H₂O in organic solvents.

A turn-on NIR fluorescence sensor for gossypol based on Yb-based metal-organic framework

The development of analytical method for selective and sensitive detection of gossypol (Gsp), an extraction from the cotton plants, is important but still challenging in food safety and medical field. Herein, we reported a turn-on near infrared (NIR) fluorescence detection strategy for Gsp based on a metal-organic framework (MOF), QBA-Yb, which was prepared from 4,4'-(quinolone-5, 8-diyl) benzoate with Yb(NO₃)₃·5H₂O by solvothermal synthesis. The Gsp acted as another "antenna" to sensitize the luminescence of Yb³⁺, leading to the turn-on NIR emission upon 467 nm excitation. As Gsp concentration increased, the NIR emission at 973 nm enhanced gradually, thus enabling highly sensitive Gsp detection in a turn-on way. The experiment and theoretical calculation results revealed the presence of strong hydrogen bonds between Gsp molecules and the MOF skeleton. The developed QBA-Yb probe showed excellent characteristics for detection of Gsp molecules, accompanied by wide linear range (5-160 μg/mL), low detection limit (0.65 μg/mL) and short response time (within 10 min). We have further demonstrated that the QBA-Yb probe was successfully applied for the determination of Gsp in real samples of cottonseeds.

A novel ratiometric fluorescent probe for water content in ethanol and temperature sensing

In this paper, two tetrahydo[5]helicene-based dyes (THH1 and THH2) were studied on their twist intramolecular charge transfer. And the water-soluble blue carbon dots (N-CDs) were synthesized. Considering that their different optical propeties, the ratiometric fluorescence probes N-CDs/THH1 and N-CDs/THH2 were constructed by mixing N-CDs and dyes simply. It was found that N-CDs/THH1 and N-CDs/THH2 could quickly and sensitively detect water content in ethanol, with linear range of 0.500-25.0 vol% and 0.500-30.0 vol%, respectively. What's more, through the actual sample test, it showed that the detection had good accuracy and precision. At the same time, it was found that two ratiometric probes could also be applied to the thermometry with good reversibility based on optical temperature sensors.

Rapid and reliable triple-emissive detection of 2,6-dichloro-4-nitroaniline as a pesticide based on a high-nuclear Cd(ii)–Sm(iii) nanocluster

A 56-metal Cd(ii)–Sm(iii) nanocluster (molecular sizes: 4.5 × 2.7 × 2.7 nm) was constructed for the rapid and reliable triple-emissive detection of 2,6-dichloro-4-nitroaniline (DCN) as a pesticide.

Dual-functional ratiometric fluorescent sensor based on mixed-lanthanide metal-organic frameworks for detection of trace water and temperature

The rapid-response ratiometric sensors are promising materials to detect trace water and temperature. However, the accurately visualized water assay in very narrow-range still remains a challenge. Herein, a novel dual-functional...

Stereospecific recognition and rapid determination of D-amino acids in human serum based on luminescent metal-organic frameworks

The current luminescent metal-organic frameworks (MOFs) based fluorescent detection mostly focuses on achiral molecules. The stereospecific recognition and determination of MOF-based detection remain challenging. A novel luminescent terbium-based MOF (Tb-MOF)...

A handy imaging sensor array based on the phase transformation from CsPbBr3 to CsPb2Br5: highly sensitive and rapid detection of water content in ethanol

This work proposes a handy imaging sensor array based on the phase transformation from CsPbBr3 to CsPb2Br5 for highly sensitive and rapid detection of the water content in ethanol.

A ratiometric fluorescent probe based on carbon dots and gold nanocluster encapsulated metal-organic framework for detection of cephalexin residues in milk

Herein, we report a ratiometric fluorescent probe based on in situ incorporation of both Gold nanoclusters (AuNCs) and Green emitting carbon dots (gCDs) into zeolitic imidazolate framework-8 (ZIF-8) to analysis of Cephalexin (CFX). Under a single excitation wavelength of 400 nm, the sensor exhibits dual-emissions centered at 520 and 630 nm. The fluorescence of AuNCs (630 nm) is selectively quenched by CFX, whereas the fluorescence of gCDs (520 nm) remainsalmostconstant. The ratiometric fluorescence signal (F₅₂₀/F₆₃₀) of the prepared composite (gCDc/AuNCs @ ZIF-8) is linearly proportional to the concentration of CFX from 0.1 to 6 ng/mL with a low detection limit (LOD) of 0.04 ng/mL, which is below the maximum residues limit (MRL) of 100 ng/mL set by the Food and Drug Administration (FDA). Moreover, the designed sensing platform was successfully applied to detect CFX in the milk samples.

Smart Mn7+ Sensing via Quenching on Dual Fluorescence of Eu3+ Complex-Modified TiO2 Nanoparticles

In this work, titania (TiO₂) nanoparticles modified by Eu(TTA)₃Phen complexes (ETP) were prepared by a simple solvothermal method developing a fluorescence Mn⁷⁺ pollutant sensing system. The characterization results indicate that the ETP cause structural deformation and redshifts of the UV-visible light absorptions of host TiO₂ nanoparticles. The ETP also reduce the crystallinity and crystallite size of TiO₂ nanoparticles. Compared with TiO₂ nanoparticles modified with Eu³⁺ (TiO₂-Eu³⁺), TiO₂ nanoparticles modified with ETP (TiO₂-ETP) exhibit significantly stronger photoluminescence under the excitation of 394 nm. Under UV excitation, TiO₂-ETP nanoparticles showed blue and red emission corresponding to TiO₂ and Eu³⁺. In addition, as the concentration of ETP in TiO₂ nanoparticles increases, the PL intensity at 612 nm also increases. When ETP-modified TiO₂ nanoparticles are added to an aqueous solution containing Mn⁷⁺, the fluorescence intensity of both TiO₂ and ETP decreases. The evolution of the fluorescence intensity ratio (I₁/I₂) of TiO₂ and ETP is linearly related to the concentration of Mn⁷⁺. The sensitivity of fluorescence intensity to Mn⁷⁺ concentration enables the design of dual fluorescence ratio solid particle sensors. The method proposed here is simple, accurate, efficient, and not affected by the environmental conditions.

Preparation and Fluorescent Wavelength Control of Multi-Color Nitrogen-Doped Carbon Nano-Dots

It is known that, by taking advantage of heteroatom doping, the electronic states and transition channels in carbon nano-dots (CNDs) can be effectively modulated. Thus, the photoluminescence (PL) properties of CNDs can be changed. For potential applications of CNDs as advanced materials for optoelectronic devices, it is important and significant to develop the practical techniques for doping heteroatoms into CNDs. In this work, we synthesize the multi-color fluorescent by using a fast and effective microwave method where the CNDs are nitrogen-doped. We examine the influence of different ratios of the raw materials on the structure and optical properties of N-CNDs. The results show that the prepared N-CNDs can generate blue (445 nm), green (546 nm), and orange (617 nm) fluorescence or PL with the mass ratio of the raw materials at 1:1, 1:2 and 1:3, respectively. We find that the N content in N-CNDs leads to different surface/edge states in n-π∗ domain. Thus, the wavelength of the PL emission from N-CNDs can be tuned via controlling the N concentration doped into the CNDs. Moreover, it is shown that the intensity of the PL from N-CNDs is mainly positively related to the content of C-O groups attached on the surface/edges of the N-CNDs. This study provides an effective experimental method and technical way to improve the fluorescent emission, and to modulate the color of the PL emission from CNDs.

Orthogonal binding and displacement of different guest types using a coordination cage host with cavity-based and surface-based binding sites

The octanuclear Co(ii) cubic coordination cage system H (or HW if it bears external water-solubilising substituents) has two types of binding site for guests. These are (i) the partially-enclosed central cavity where neutral hydrophobic organic species can bind, and (ii) the six 'portals' in the centres of each of the faces of the cubic cage where anions bind via formation of a network of CH⋯X hydrogen bonds between the anion and CH units on the positively-charged cage surface, as demonstrated by a set of crystal structures. The near-orthogonality of these guest binding modes provides the basis for an unusual dual-probe fluorescence displacement assay in which either a cavity-bound fluorophore (4-methyl-7-amino-coumarin, MAC; λ_em = 440 nm), or a surface-bound anionic fluorophore (fluorescein, FLU; λ_em = 515 nm), is displaced and has its emission ‘switched on’ according to whether the analyte under investigation is cavity-binding, surface binding, or a combination of both. A completely orthogonal system is demonstrated based using a Hw/MAC/FLU combination: addition of the anionic analyte ascorbate displaced solely FLU from the cage surface, increasing the 515 nm (green) emission component, whereas addition of a neutral hydrophobic guest such as cyclooctanone displaced solely MAC from the cage central cavity, increasing the 440 nm (blue) emission component. Addition of chloride results in some release of both components, and an intermediate colour change, as chloride is a rare example of a guest that shows both surface-binding and cavity-binding behaviour. Thus we have a colourimetric response based on differing contributions from blue and green emission components in which the specific colour change signals the binding mode of the analyte. Addition of a fixed red emission component from the complex [Ru(bipy)₃]²⁺ (Ru) provides a baseline colour shift of the overall colour of the luminescence closer to neutral, meaning that different types of guest binding result in different colour changes which are easily distinguishable by eye.

Orthogonal binding of neutral or anionic fluorophores to the cavity or surface, respectively, of a coordination cage host allows a dual-probe displacement assay which gives a different fluorescence colorimetric response according to where analyte species bind.

Facile synthesis of highly luminescent rod-like terbium-based metal-organic frameworks for sensitive detection of olaquindox

Olaquindox (OLA), a chemically synthesized antibacterial growth promoter, despite being strictly controlled, is illegally used in feed to improve feed conversion efficiency and increase the rate of weight gain for animals. However, it has become clear that OLA has toxic effects on human beings via the transmission of OLA through the food chain. Here, by employing terbium nitrate to provide metal ions and benzene-1,3,5-tricarboxylic acid (H₃BTC) as an organic ligand, a simple, rapid, and easy scale-up synthetic method was presented for the fabrication of water-stable and highly luminescent rod-like metal-organic frameworks (Tb-BTC MOFs). Using the Tb-BTC MOFs as a luminescent probe, the luminescence quenching effect was obviously observed upon the addition of OLA, ascribed to the binding of OLA molecules on the surface of Tb-BTC and the existence of an inner-filter effect (IFE) mechanism. The correlation between the luminescence quenching ΔI and the concentration of OLA was found to be linear from 1.0 to 1000.0 μM with a detection limit of 20.6 nM. Furthermore, a Tb-BTC-loaded fiber paper was prepared and it is highly responsive (30 s) and suitable for visual OLA assay. The method described here can be successfully applied to the detection of OLA in animal feed and edible animal tissue samples.