Proton-Transfer-Reaction Mass Spectrometry: Applications in Atmospheric Sciences

Determination of personal exposure to volatile organic compounds and their health risks after the use of mosquito repellents in residential environments using passive sampling

The ubiquitous use of mosquito repellents in homes across Asia, Africa, and South America is related with human exposure to indoor volatile organic compounds (VOCs). There are three primary types of mosquito repellents: those in the form of coils, mats, and liquids. The repellent mechanisms of these products are distinct, resulting in the generation of varying types of VOCs during the repellent process. In this study, the emission characteristics of commercial coil-, mat-, and liquid-type mosquito repellents were observed in a laboratory chamber using real-time measurement. A previously developed personal passive sampler, ePTFE PS, was used to quantify personal exposure to indoor VOCs while 86 volunteers habitually used those three representative types for 3 h in their residence. Notable increase of indoor benzene was observed for coil- and mat-type mosquito repellents, while α-pinene concentration increased significantly following the use of liquid-type mosquito repellent. The average incremental cancer risks for benzene were 10-6 to 10-4 for adults following the use of coil- and mat-type mosquito repellents. The average non-cancer risks for all chemicals were <1 after the use of three types of mosquito repellents. Considering the potential human health risks associated with byproducts (e.g., particulate matter or carbon monoxide from incomplete combustion) emitted after mosquito coil use, further research on this topic is warranted.

Pt-O-Ce interaction enhanced by Al substitution to promote the acetone degradation through accelerating the breaking of CC bond in acetic acid intermediate

The reaction rate of volatile organic compounds (VOCs) oxidation is controlled by the rate-limiting step in the total reaction process. This study proposes a novel strategy, by which the rate-limiting step of acetone oxidation is accelerated by enhanced chemical bond interaction with more electrons transfer through Al-substituted CeO2 loaded Pt (Pt/Al-CeO2). Results indicate that the rate-limiting step in the process of acetone oxidation is the decomposition of acetic acid. Al substitution enhances the Pt-O-Ce interaction that transfers more electrons from Pt/Al-CeO2 to acetic acid, promoting the breaking of its CC bond with a lower free energy barrier. Attributing to these, the reaction rate of Pt/Al-CeO2 is 13 times as high as that of Pt/CeO2 and its TOFPt value is 11 times as high as that of Pt/CeO2 at 150 °C. Moreover, the CO2 selectivity of Pt/Al-CeO2 also increases by 22 %. This work establishes the relationship between Pt-O-Ce interaction and acetone oxidation that provides novel perspectives on the development of efficient materials for VOCs oxidation.

Detection of several volatile organic compounds through Ar+ induced chemical ionisation using inductively coupled plasma-tandem mass spectrometry (ICP-MS/MS)

A new analytical technique for detection of organic compounds using inductively coupled plasma-tandem mass spectrometry (ICP-MS/MS) is described. Volatile organic compounds (VOCs) were introduced into the collision/reaction cell (CRC), instead of through the ICP ion source, and the molecules were ionised through an ion reaction, induced by collision with the primary ions (Ar+) produced in the ICP. The ionisation characteristics of this new approach were investigated by mass spectrometric analysis of eight VOCs (i.e., benzene, toluene, ethyl acetate, methyl butyrate, ethyl butyrate, pentyl acetate, pyridine, and 2-methylfuran). These molecules were detected as molecular ions (M+), protonated ions ([M + H]+), or deprotonated ions ([M - H]+), demonstrating that soft ionisation was achieved by the present ionisation protocol using ICP-MS/MS. In addition, a volatile selenium-containing organic compound, dimethyl diselenide (Se2(CH3)2), was also analysed to investigate the feasibility of this ionisation protocol to achieve soft and hard ionisation simultaneously. Several Se-related ions such as Se+, SeH+, Se2+, [SeCH3]+, and [Se2CH3]+, together with [Se2(CH3)2]+, were observed, suggesting that while soft ionisation was possible, ion reaction-induced-fragmentation and hard ionisation also occurred. To demonstrate the analytical capability of the present technique, volatile components released from coffee beans were subjected to the present mass spectrometric analysis. Many ion peaks originating from VOCs were detected from the coffee beans. The data obtained here demonstrated that ICP-MS equipped with a CRC can become an effective tool for analyzing both elements and molecules.

Predominance of aminated water interfaces on transition-metal nanoparticulate to enhance synergetic removal of carbonyls and inhibition of CO2 production

In the context of the air quality co-benefits of carbon neutrality, conventional strategies for the end-of-pipe control aimed at reducing volatile organic compounds (VOCs) to carbon dioxide (CO2) require a more realistic revision. This study explored the synergetic removal of carbonyls with low carbon emission by amine-functionalized manganese dioxide (MnO2), obtained through a method involving freezing-thawing cycles. Molecular-level characterization revealed that an ordered array of interfacial water dimers (H5O2+, a class of water-proton clusters) on the MnO2 surface enhanced the robust bonding of metal sites with amino groups. Amine-functionalized MnO2 can be negatively charged under environmental acidity to further interfacial proton-coupled electron transfers. This cooperativity in interfacial chemical processes promoted the selective conversion of carbonyl carbons to bicarbonated amides (NH3+HCO3-), serving as a reservoir of CO2. In comparison to a commercially used 2,4-dinitrophenylhydrazine (DNPH) control, this approach achieved nearly complete removal of a priority carbonyl mixture containing formaldehyde, acetaldehyde, and acetone synergically. The formation of secondary organic compounds in the gas phase and CO2 off-gas were suppressed.

The UCI Fluxtron: A versatile dynamic chamber and software system for biosphere-atmosphere exchange research

Here we present the UCI Fluxtron, a cost-effective multi-enclosure dynamic gas exchange system that provides an adequate level of control of the experimental conditions for investigating biosphere-atmosphere exchange of trace gases. We focus on the hardware and software used to monitor, control, and record the air flows, temperatures, and valve switching, and on the software that processes the collected data to calculate the exchange flux of trace gases. We provide the detailed list of commercial materials used and also the software code developed for the Fluxtron, so that similar dynamic enclosure systems can be quickly adopted by interested researchers. Furthermore, the two software components -Fluxtron Control and Fluxtron Process- work independently of each other, thus being highly adaptable for other experimental designs. Beyond plants, the same experimental setup can be applied to the study of trace gas exchange by animals, microbes, soil, or any materials that can be enclosed in a suitable container.

Recent advances in mass spectrometry techniques for atmospheric chemistry research on molecular-level

The Earth's atmosphere is composed of an enormous variety of chemical species associated with trace gases and aerosol particles whose composition and chemistry have critical impacts on the Earth's climate, air quality, and human health. Mass spectrometry analysis as a powerful and popular analytical technique has been widely developed and applied in atmospheric chemistry for decades. Mass spectrometry allows for effective detection, identification, and quantification of a broad range of organic and inorganic chemical species with high sensitivity and resolution. In this review, we summarize recently developed mass spectrometry techniques, methods, and applications in atmospheric chemistry research in the past several years on molecular-level. Specifically, new developments of ion-molecule reactors, various soft ionization methods, and unique coupling with separation techniques are highlighted. The new mass spectrometry applications in laboratory studies and field measurements focused on improving the detection limits for traditional and emerging volatile organic compounds, characterizing multiphase highly oxygenated molecules, and monitoring particle bulk and surface compositions.

A New Methodology for High Spatiotemporal Resolution Measurements of Air Volatile Organic Compounds: From Sampling to Data Deconvolution

Monitoring of volatile organic compounds (VOCs) in air is crucial for understanding their atmospheric impacts and advancing their emission reduction plans. This study presents an innovative integrated methodology suitable for achieving semireal-time high spatiotemporal resolution three-dimensional measurements of VOCs from ground to hundreds of meters above ground. The methodology integrates an active AirCore sampler, custom-designed for deployment from unmanned aerial vehicles (UAV), a proton-transfer-reaction mass spectrometry (PTR-MS) for sample analysis, and a data deconvolution algorithm for improved time resolution for measurements of multiple VOCs in air. The application of the deconvolution technique significantly improves the signal strength of data from PTR-MS analysis of AirCore samples and enhances their temporal resolution by 4 to 8 times to 4-11 s. A case study demonstrates that the methodology can achieve sample collection and analysis of VOCs within 45 min, resulting in >120-360 spatially resolved data points for each VOC measured and achieving a horizontal resolution of 20-55 m at a UAV flight speed of 5 m/s and a vertical resolution of 5 m. This methodology presents new possibilities for acquiring 3-dimensional spatial distributions of VOC concentrations, effectively tackling the longstanding challenge of characterizing three-dimensional VOC distributions in the lowest portion of the atmospheric boundary layer.

Plant Molecular Phenology and Climate Feedbacks Mediated by BVOCs

Climate change profoundly affects the timing of seasonal activities of organisms, known as phenology. The impact of climate change is not unidirectional; it is also influenced by plant phenology as plants modify atmospheric composition and climatic processes. One important aspect of this interaction is the emission of biogenic volatile organic compounds (BVOCs), which link the Earth's surface, atmosphere, and climate. BVOC emissions exhibit significant diurnal and seasonal variations and are therefore considered essential phenological traits. To understand the dynamic equilibrium arising from the interplay between plant phenology and climate, this review presents recent advances in comprehending the molecular mechanisms underpinning plant phenology and its interaction with climate. We provide an overview of studies investigating molecular phenology, genome-wide gene expression analyses conducted in natural environments, and how these studies revolutionize the concept of phenology, shifting it from observable traits to dynamic molecular responses driven by gene-environment interactions. We explain how this knowledge can be scaled up to encompass plant populations, regions, and even the globe by establishing connections between molecular phenology, changes in plant distribution, species composition, and climate.

Multiple effects of relative humidity on heterogeneous ozonolysis of cooking organic aerosol proxies from heated peanut oil emissions

The exposure to cooking organic aerosols (COA) is closely related to people's daily lives. Despite extensive investigations into COA's model compounds like oleic acid, the intricacies of heterogeneous ozonolysis of real COA and the effects of ambient conditions like humidity remain elusive. In this work, the ozonolysis of COA proxies from heated peanut oil emissions was investigated using diffuse reflectance infrared Fourier transform (DRIFTS) spectroscopy, and proton transfer reaction time-of-flight mass spectrometer (PTR-ToF-MS). We found that humidity hinders the reaction between ozone and CC double bonds due to the competitive adsorption of water and ozone on COA. Although visible light has little influence on the ozonolysis of COA in the absence of humidity, the ozonolytic CO production is significantly promoted by visible light in the presence of humidity. It may be attributed to the formation of water-derived reactive oxygen species (ROS, mainly HO•) from the photosensitization of polycyclic aromatic hydrocarbons (PAHs) in COA. We also found that humidity can enhance the depolymerization of carboxylic acid dimers and hydrolysis of intrinsic acetals in the COA. Moreover, humidity promotes the release of VOCs during both the dark and light ozonolysis of COA. This work reveals the important roles of humidity-responsive and photo-responsive components in COA during its ozonolysis, and the change in VOC release may guide the control of human VOC exposure in indoor air.

Biogenic volatile organic compounds dominated the near-surface ozone generation in Sichuan Basin, China, during fall and wintertime

The complex air pollution driven by both Ozone (O3) and fine particulate matter (PM2.5) significantly influences the air quality in the Sichuan Basin (SCB). Understanding the O3 formation during autumn and winter is necessary to understand the atmospheric oxidative capacity. Therefore, continuous in-site field observations were carried out during the late summer, early autumn and winter of 2020 in a rural area of Chongqing. The total volatile organic compounds (VOCs) concentration reported by a Proton-Transfer-Reaction Time-of-Flight Mass Spectrometry (PTR-ToF-MS) were 13.66 ± 9.75 ppb, 5.50 ± 2.64 ppb, and 9.41 ± 5.11 ppb in late summer, early autumn and winter, respectively. The anthropogenic VOCs (AVOCs) and biogenic VOCs (BVOCs) were 8.48 ± 7.92 ppb and 5.18 ± 2.99 ppb in late summer, 3.31 ± 1.89 ppb and 2.19 ± 0.93 ppb in autumn, and 6.22 ± 3.99 ppb and 3.20 ± 1.27 ppb in winter. A zero-dimensional atmospheric box model was employed to investigate the sensitivity of O3-precursors by relative incremental reactivity (RIR). The RIR values of AVOCs, BVOCs, carbon monoxide (CO), and nitrogen oxides (NOx) were 0.31, 0.71, 0.09, and -0.36 for late summer, 0.24, 0.59, 0.22, and -0.38 for early autumn, and 0.30, 0.64, 0.33 and -0.70 for winter, and the results showed that the O3 formation of sampling area was in the VOC-limited region, and O3 was most sensitive to BVOCs (with highest RIR values, > 0.6). This study can be helpful in understanding O3 formation and interpreting the secondary formation of aerosols in the winter.

Increase of the indoor concentration of volatile organic compounds after the use of incense and scented candle in studio apartments determined using passive sampling

Burning incenses and scented candles may provide harmful chemicals. Although many studies have evaluated volatile organic chemicals emitted by their use and related health risks, extension of our understanding for guiding appropriate use under various use conditions is necessary. In this study, emission characteristics of commercial incenses and scented candles were evaluated in a laboratory chamber using real-time measurement and the time-weighted average exposure concentrations of monoaromatic compounds and monoterpenes were assessed using passive samplers while volunteers living in a studio apartment use them. After burning incense, the average levels of benzene increased from 1.4 to 100 μg m-3. The presence of a wood core in commercial incense products was the main cause of high benzene emission by burning them although the increase in benzene was also influenced by factors such as the brand of the products, the number of incense sticks burned, the duration of each burning session, and ventilation period. Electrical warming of scented candles increased the levels of monoterpenes by factors of 16-30 on average. Considering the emission characteristics found in this study, exposure to benzene and monoterpenes could be mitigated by cautious use of those products in residential areas.

Obscured Contribution of Oxygenated Intermediate-Volatility Organic Compounds to Secondary Organic Aerosol Formation from Gasoline Vehicle Emissions

Secondary organic aerosol (SOA) formation from gasoline vehicles spanning a wide range of emission types was investigated using an oxidation flow reactor (OFR) by conducting chassis dynamometer tests. Aided by advanced mass spectrometric techniques, SOA precursors, including volatile organic compounds (VOCs) and intermediate/semivolatile organic compounds (I/SVOCs), were comprehensively characterized. The reconstructed SOA produced from the speciated VOCs and I/SVOCs can explain 69% of the SOA measured downstream of an OFR upon 0.5-3 days' OH exposure. While VOCs can only explain 10% of total SOA production, the contribution from I/SVOCs is 59%, with oxygenated I/SVOCs (O-I/SVOCs) taking up 20% of that contribution. O-I/SVOCs (e.g., benzylic or aliphatic aldehydes and ketones), as an obscured source, account for 16% of total nonmethane organic gas (NMOG) emission. More importantly, with the improvement in emission standards, the NMOG is effectively mitigated by 35% from China 4 to China 6, which is predominantly attributed to the decrease of VOCs. Real-time measurements of different NMOG components as well as SOA production further reveal that the current emission control measures, such as advances in engine and three-way catalytic converter (TWC) techniques, are effective in reducing the "light" SOA precursors (i.e., single-ring aromatics) but not for the I/SVOC emissions. Our results also highlight greater effects of O-I/SVOCs to SOA formation than previously observed and the urgent need for further investigation into their origins, i.e., incomplete combustion, lubricating oil, etc., which requires improvements in real-time molecular-level characterization of I/SVOC molecules and in turn will benefit the future design of control measures.

Chemical Analysis of Exhaled Vape Emissions: Unraveling the Complexities of Humectant Fragmentation in a Human Trial Study

Electronic cigarette smoking (or vaping) is on the rise, presenting questions about the effects of secondhand exposure. The chemical composition of vape emissions was examined in the exhaled breath of eight human volunteers with the high chemical specificity of complementary online and offline techniques. Our study is the first to take multiple exhaled puff measurements from human participants and compare volatile organic compound (VOC) concentrations between two commonly used methods, proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS) and gas chromatography (GC). Five flavor profile groups were selected for this study, but flavor compounds were not observed as the main contributors to the PTR-ToF-MS signal. Instead, the PTR-ToF-MS mass spectra were overwhelmed by e-liquid thermal decomposition and fragmentation products, which masked other observations regarding flavorings and other potentially toxic species associated with secondhand vape exposure. Compared to the PTR-ToF-MS, GC measurements reported significantly different VOC concentrations, usually below those from PTR-ToF-MS. Consequently, PTR-ToF-MS mass spectra should be interpreted with caution when reporting quantitative results in vaping studies, such as doses of inhaled VOCs. Nevertheless, the online PTR-ToF-MS analysis can provide valuable qualitative information by comparing relative VOCs in back-to-back trials. For example, by comparing the mass spectra of exhaled air with those of direct puffs, we can conclude that harmful VOCs present in the vape emissions are largely absorbed by the participants, including large fractions of nicotine.

Ozone Chemistry on Greasy Glass Surfaces Affects the Levels of Volatile Organic Compounds in Indoor Environments

The chemistry of ozone (O3) on indoor surfaces leads to secondary pollution, aggravating the air quality in indoor environments. Here, we assess the heterogeneous chemistry of gaseous O3 with glass plates after being 1 month in two different kitchens where Chinese and Western styles of cooking were applied, respectively. The uptake coefficients of O3 on the authentic glass plates were measured in the dark and under UV light irradiation typical for indoor environments (320 nm < λ < 400 nm) at different relative humidities. The gas-phase product compounds formed upon reactions of O3 with the glass plates were evaluated in real time by a proton-transfer-reaction quadrupole-interface time-of-flight mass spectrometer. We observed typical aldehydes formed by the O3 reactions with the unsaturated fatty acid constituents of cooking oils. The formation of decanal, 6-methyl-5-hepten-2-one (6-MHO), and 4-oxopentanal (4-OPA) was also observed. The employed dynamic mass balance model shows that the estimated mixing ratios of hexanal, octanal, nonanal, decanal, undecanal, 6-MHO, and 4-OPA due to O3 chemistry with authentic grime-coated kitchen glass surfaces are higher in the kitchen where Chinese food was cooked compared to that where Western food was cooked. These results show that O3 chemistry on greasy glass surfaces leads to enhanced VOC levels in indoor environments.

Pollution characteristics, source appointment and environmental effect of oxygenated volatile organic compounds in Guangdong-Hong Kong-Macao Greater Bay Area: Implication for air quality management

Same as other bay areas, the Guangdong-Hong Kong-Macao Greater Bay Area (GBA) is also suffering atmospheric composite pollution. Even a series of atmospheric environment management policies have been conducted to win the "blue sky defense battle", the atmospheric secondary pollutants (e.g., O3) originated from oxygenated volatile organic compounds (OVOCs) still threaten the air quality in GBA. However, there lacks a systematic summary on the emission, formation, pollution and environmental effects of OVOCs in this region for further air quality management. This review focused on the researches related to OVOCs in GBA, including their pollution characteristics, detection methods, source distributions, secondary formations, and impacts on the atmosphere. Pollution profile of OVOCs in GBA revealed that the concentration percentage among total VOCs from Guangzhou and Dongguan cities exceeded 50 %, while methanol, formaldehyde, acetone, and acetaldehyde were the top four highest concentrated OVOCs. The detection technique on regional atmospheric OVOCs (e.g., oxygenated organic molecules (OOMs)) underwent an evolution of off-line derivatization method, on-line spectroscopic method and on-line mass spectrometry method. The OVOCs in GBA were mainly from primary emissions (up to 80 %), including vehicle emissions and biomass combustion. The anthropogenic alkenes and aromatics in urban area, and natural isoprene in rural area also made a significant contribution to the secondary emission (e.g., photochemical formation) of OVOCs. About 20 % in average of ROx radicals was produced from photolysis of formaldehyde in comparison with O3, nitrous acid and rest OVOCs, while the reaction between OVOCs and free radical accelerated the NOx-O3 cycle, contributing to 15 %-60 % cumulative formation of O3 in GBA. Besides, the heterogeneous reactions of dicarbonyls generated 21 %-53 % of SOA. This review also provided suggestions for future research on OVOCs in terms of regional observation, analytical method and mechanistic study to support the development of a control and management strategy on OVOCs in GBA and China.

Characterization of organic vapors by a Vocus proton-transfer-reaction mass spectrometry at a mountain site in southeastern China

Biogenic and anthropogenic organic vapors are crucial precursors of ozone and secondary organic aerosol (SOA) in the atmosphere. Here we conducted real-time measurements of gaseous organic compounds using a Vocus proton-transfer-reaction mass spectrometer (Vocus PTR-MS) at the Shanghuang mountain site (1128 m a.s.l.) in southeastern China during November 2022. Our results revealed a substantial impact of mixed biogenic and anthropogenic compounds at the mountain site, with oxygenated volatile organic compounds (OVOCs) comprising 74 % of the organic vapors. Two distinct periods, characterized by sunny days (P1) and persistent cloud events (P2), were observed. P1 exhibited higher concentrations of biogenic-related emissions compared to P2. For instance, isoprene, monoterpenes, and sesquiterpenes during P1 were 2.4-2.9 times higher than those during P2. OVOCs such as acetaldehyde, MVK + MACR, acetone, and MEK also showed higher concentrations during P1, indicating a dominant source from the photochemical oxidation of biogenic VOCs. Anthropogenic-related VOCs like benzene and toluene had higher concentrations during P2, displaying different diurnal cycles compared to P1. Our analysis identified four biogenic-related factors dominated by isoprene and sesquiterpene oxidation products, and two anthropogenic-related factors. During P1, biogenic sources contributed approximately 80 % to total organic compounds, while during P2, anthropogenic sources, particularly the aromatic-related factor, increased from 16 % to 35 %. Furthermore, a unique factor characterized by C2 amines and C3 amides and periodic plumes indicated the influence of industrial emissions from regional transport. The study highlights the significant variations in sources and compositions of gaseous organic compounds at regional mountain sites due to changes in meteorology and photochemical processing, potentially impacting regional ozone and SOA formation.

Qualitative and quantitative rapid detection of VOCs differentially released by VAP-associated bacteria using PTR-MS and FGC-PTR-MS

Ventilator-associated pneumonia (VAP) is a prevalent disease caused by microbial infection, resulting in significant morbidity and mortality within the intensive care unit (ICU). The rapid and accurate identification of pathogenic bacteria causing VAP can assist clinicians in formulating timely treatment plans. In this study, we attempted to differentiate bacterial species in VAP by utilizing the volatile organic compounds (VOCs) released by pathogens. We cultured 6 common bacteria in VAP in vitro, including Acinetobacter baumannii, Enterobacter cloacae, Escherichia coli, Pseudomonas aeruginosa, Stenotrophomonas maltophilia, and Staphylococcus aureus, which covered most cases of VAP infection in clinic. After the VOCs released by bacteria were collected in sampling bags, they were quantitatively detected by a proton transfer reaction-mass spectrometry (PTR-MS), and the characteristic ions were qualitatively analyzed through a fast gas chromatography-proton transfer reaction-mass spectrometry (FGC-PTR-MS). After conducting principal component analysis (PCA) and analysis of similarities (ANOSIM), we discovered that the VOCs released by 6 bacteria exhibited differentiation following 3 h of quantitative cultivation in vitro. Additionally, we further investigated the variations in the types and concentrations of bacterial VOCs. The results showed that by utilizing the differences in types of VOCs, 6 bacteria could be classified into 5 sets, except for A. baumannii and E. cloacae which were indistinguishable. Furthermore, we observed significant variations in the concentration ratio of acetaldehyde and methyl mercaptan released by A. baumannii and E. cloacae. In conclusion, the VOCs released by bacteria could effectively differentiate the 6 pathogens commonly associated with VAP, which was expected to assist doctors in formulating treatment plans in time and improve the survival rate of patients.

Origin and transformation of volatile organic compounds at a regional background site in Hong Kong: Varied photochemical processes from different source regions

Volatile organic compounds (VOCs) are important gaseous constituents in the troposphere, impacting local and regional air quality, human health, and climate. Oxidation of VOCs, with the participation of nitrogen oxides (NOx), leads to the formation of tropospheric ozone (O3). Accurately apportioning the emission sources and transformation processes of ambient VOCs, and effectively estimation of OH reactivity and ozone formation potential (OFP) will play an important role in reducing O3 pollution in the atmosphere and improving public health. In this study, field measurements were conducted at a regional background site (Hok Tsui; HT) in Hong Kong from October to November 2020 with proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS). VOC data coupled with air mass back trajectory cluster analysis and receptor modelling were applied to reveal the pollution pattern, emission sources and transformation of ambient VOCs at HT in autumn 2020. Seven sources were identified by positive matrix factorization (PMF) analysis, namely vehicular + industrial, solvent usage, primary oxygenated VOCs (OVOCs), secondary OVOCs 1, secondary OVOCs 2 (aged), biogenic emissions, and background + biomass burning. Secondary formation and vehicular + industrial emissions are the vital sources of ambient VOCs at HT supersite, contributing to 20.8 % and 46.7 % of total VOC mixing ratios, respectively. Integrated with backward trajectory analysis and correlations of VOCs with their oxidation products, short-range transport of air masses from inland regions of southeast China brought high levels of total VOCs but longer-range transport of air masses brought more secondary OVOCs in aged air masses. Photolysis of OVOCs was the most important contributor to OH reactivity and OFP, among which aldehyde was the dominant contributor. The results of this study highlight the photochemical processing of VOCs from different source regions which should be considered in strategy making for pollution reduction.

Exposure assessment during paint spraying and drying using PTR-ToF-MS

Spraying is a common way to distribute occupational products, but it puts worker's health at risk by exposing them to potentially harmful particles and gases. The objective of this study is to use time-resolved measurements to gain an understanding of spray applications at the process level and to compare them to predictions of exposure models. We used proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS) at 1-s time resolution to monitor the gas phase concentration of the solvents acetone, ethanol, butyl acetate, xylene and 1-methoxy-2-propy acetate during outdoor spraying and indoor drying of metal plate under various conditions of outdoor air supply. We found that during spraying, gas-phase exposure was dominated by the more volatile solvents acetone and ethanol, which exhibited strong concentration variations due to the outdoor winds. During drying, exposure strongly depended on the strength of ventilation. Under conditions with high supply of outdoor air, our measurements show a near-exponential decay of the solvent concentrations during drying. Conversely, under conditions without outdoor air supply, the drying process required hours, during which the less volatile solvents passed through a concentration maximum in the gas phase, so that the exposure during drying exceeded the exposure during spraying. The concentrations measured during spraying were then compared for each of the substances individually with the predictions of the exposure models ECETOC TRA, Stoffenmanager, and ART using TREXMO. For these conditions, ECETOC TRA and Stoffenmanager predicted exposures in the measured concentration range, albeit not conservative for all solvents and each application. In contrast, ART largely overestimated the exposure for the more volatile solvents acetone and ethanol and slightly underestimated exposure to 1M2PA for one spraying. ECETOC TRA and ART do not have options to predict exposure during drying. Stoffenmanager has the option to predict drying together with spraying, but not to predict the drying phase independently. Our study demonstrates the importance of considering both the spray cloud and solvent evaporation during the drying process. To improve workplace safety, there is a critical need for enhanced exposure models and comprehensive datasets for calibration and validation covering a broader range of exposure situations.

Siloxane Emissions and Exposures during the Use of Hair Care Products in Buildings

Cyclic volatile methyl siloxanes (cVMS) are ubiquitous in hair care products (HCPs). cVMS emissions from HCPs are of concern, given the potential adverse impact of siloxanes on the environment and human health. To characterize cVMS emissions and exposures during the use of HCPs, realistic hair care experiments were conducted in a residential building. Siloxane-based HCPs were tested using common hair styling techniques, including straightening, curling, waving, and oiling. VOC concentrations were measured via proton-transfer-reaction time-of-flight mass spectrometry. HCP use drove rapid changes in the chemical composition of the indoor atmosphere. cVMS dominated VOC emissions from HCP use, and decamethylcyclopentasiloxane (D5) contributed the most to cVMS emissions. cVMS emission factors (EFs) during hair care routines ranged from 110-1500 mg/person and were influenced by HCP type, styling tools, operation temperatures, and hair length. The high temperature of styling tools and the high surface area of hair enhanced VOC emissions. Increasing the hair straightener temperature from room temperature to 210 °C increased cVMS EFs by 50-310%. Elevated indoor cVMS concentrations can result in substantial indoor-to-outdoor transport of cVMS via ventilation (0.4-6 tons D5/year in the U.S.); thus, hair care routines may augment the abundance of cVMS in the outdoor atmosphere.

Source apportionment of volatile organic compounds during paddy-residue burning season in north-west India reveals large pool of photochemically formed air toxics

Paddy-residue burning is associated with poor air quality in north-west India during October-November every year. However, till date a quantitative study of its contribution to ambient volatile organic compounds (VOCs) using highly time-resolved measurements within the region has been lacking. Several VOCs like benzene are carcinogenic and also fuel formation of secondary pollutants such as secondary organic aerosol (SOA) and ozone. Here, we undertake quantitative source-apportionment using a PMF source-receptor model on a high-quality in-situ measured dataset of 54 VOCs in Punjab, India, and validate the model results using source profiles. The contribution of the seven most dominant sources to the total VOC mass concentrations were: daytime photochemistry and biogenic VOCs (BVOCs) (26%), followed by solid-fuel usage and waste-disposal (18%), traffic (two-wheeler 14% and four-wheeler 10%), photochemically aged biomass burning (17%), industries and solvent usage (9%), and fresh paddy residue burning (6%). Ozone production potential was dominated by solid fuel usage and waste disposal (25%), followed by traffic (two-wheeler 11% and four-wheeler 12%), BVOCs and photooxidation products (21%), photochemically aged biomass burning (16%), industries & solvent usage (9%) and fresh paddy residue burning (6%). SOA production was dominated by traffic (two-wheeler 26% and four-wheeler 28%) followed by solid fuel usage and waste disposal (22%), photochemically aged biomass burning emissions (15%) with minor contribution from industries & solvents (6%), fresh paddy residue burning (2%) and photochemistry and biogenic VOCs (1%). Comparisons with global emission inventories REASv3.2.1 and EDGARv4.3.2, showed both overestimate the industry and solvent source. Further, EDGARv4.3.2 underestimated the traffic source whereas paddy residue burning emissions are absent in REASv3.2.1. Although the overall mass contribution of paddy-residue burning emissions isn't high, our results show that health-relevant compounds emitted directly and formed photochemically from biomass burning sources active at this time are majorly responsible for the unhealthy air.

Monitoring of n-hexane degradation in a plasma reactor by chemical ionization mass spectrometry

n-Hexane (C6H14) removal and conversion are investigated in a filamentary plasma generated by a pulsed high-voltage Dielectric Barrier Discharge (DBD) at atmospheric pressure and room temperature in a dry N2/O2 (20%) mixture with C6H14. The degradation of n-hexane and the by-product formation are analyzed in real-time using a high-resolution Fourier Transform Ion Cyclotron Resonance (FT-ICR) mass spectrometer coupled with Chemical Ionization (CI). As alkanes are reacting slowly with H3O+ ions, two precursor ions were used: O2+ to follow the n-hexane mixing ratios and H3O+ to follow the mixing ratios of organic by-products. As the CI-FTICR technique can work at high mixing ratios, studies were made between 5 and 200 ppm of n-hexane. Absorption spectroscopy is also used to follow ozone and carbon dioxide molecules. We show that the DBD efficiency increases for lower n-hexane mixing ratios and a large number of by-products are identified, with the major compounds being: formaldehyde, acetaldehyde, propanal, carbon dioxide, and carbon monoxide along with nitrate compounds. Based on the nature of the by-products characterized, a mechanism accounting for their formation is proposed.

Gas phase H+, H3O+ and NH4+ affinities of oxygen-bearing volatile organic compounds; DFT calculations for soft chemical ionisation mass spectrometry

Quantum chemistry calculations were performed using the density functional theory, DFT, to understand the structures and energetics of organic ions relevant to gas phase ion chemistry in soft chemical ionisation mass spectrometry analytical methods. Geometries of a range of neutral volatile organic compound molecules and ions resulting from protonation, the addition of H3O+ and the addition of NH4+ were optimised using the B3LYP hybrid DFT method. Then, the total energies and the normal mode vibrational frequencies were determined, and the total enthalpies of the neutral molecules and ions were calculated for the standard temperature and pressure. The calculations were performed for several feasible structures of each of the ions. The proton affinities of several benchmark molecules agree with the accepted values within ±4 kJ mol-1, indicating that B3LYP/6-311++G(d,p) provides chemical accuracy for oxygen-containing volatile organic compounds. It was also found that the binding energies of H3O+ and NH4+ to molecules correlate with their proton affinities. The results contribute to the understanding of ligand switching ion-molecule reactions important for secondary electrospray ionisation, SESI, and selected ion flow tube, SIFT, mass spectrometries.

Direct identification of total and missing OH reactivities from light-duty gasoline vehicle exhaust in China based on LP-LIF measurement

Considerable efforts have been devoted to characterising the chemical components of vehicle exhaust. However, these components may not accurately reflect the contribution of vehicle exhaust to atmospheric reactivity because of the presence of species not accounted for ("missing species") given the limitations of analytical instruments. In this study, we improved the laser photolysis-laser-induced fluorescence (LP-LIF) technique and applied it to directly measure the total OH reactivity (TOR) in exhaust gas from light-duty gasoline vehicles in China. The TOR for China I to VI-a vehicles was 15.6, 16.3, 8.4, 2.6, 1.5, and 1.6 × 10⁴ sec^-1, respectively, reflecting a notable drop as emission standards were upgraded. The TOR was comparable between cold and warm starts. The missing OH reactivity (MOR) values for China I to IV vehicles were close to zero with a cold start but were much higher with a warm start. The variations in oxygenated volatile organic compounds (OVOCs) under different emission standards and for the two start conditions were similar to those of the MOR, indicating that OVOCs and the missing species may have similar production processes. Online measurement revealed that the duration of the stable driving stage was the primary factor leading to the production of OVOCs and missing species. Our findings underscore the importance of direct measurement of TOR from vehicle exhaust and highlight the necessity of adding OVOCs and other organic reactive gases in future upgrades of emission standards, such that the vehicular contribution to atmospheric reactivity can be more effectively controlled.

Abundant oxygenated volatile organic compounds and their contribution to photochemical pollution in subtropical Hong Kong

Volatile organic compounds (VOCs), which are ubiquitous pollutants in the urban and regional atmosphere, promote the formation of ozone (O3) and secondary organic aerosols, thereby significantly affecting the air quality and human health. The ambient VOCs at a coastal suburban site in Hong Kong were continuously measured using proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS) from November 2020 to December 2020. 83 VOC species, including 23 CxHy, 53 CxHyO1-3, and 7 nitrogen-containing species, were measured during the campaign, with a mean concentration of 36.75 ppb. Oxygenated VOCs (OVOCs) accounted for most (77.4%) of the measured species, including CxHyO1 (50.7%) and CxHyO2 (25.1%). The measured VOC species exhibited distinct temporal and diurnal variations. High concentrations of isoprene and OVOCs were measured in autumn with more active photochemistry, whereas large evening peaks of aromatics from local and regional primary emissions were prominent in winter. The OH reactivity and O3 formation potential (OFP) of key precursors were quantified. OVOCs contributed about half of the total OH reactivity and OFP, followed by alkenes and aromatics, and the contribution of aromatics increased significantly in winter. The potential source contribution function was used to investigate the potential source regions associated with high VOC concentrations. Through positive matrix factorization analysis, six major sources were identified based on fingerprint molecules. The contributions of biogenic sources and secondary formation to the observed species were notable in late autumn, whereas vehicle emissions and solid fuel combustion had higher contributions in winter. The findings highlight the important role of OVOCs in photochemical pollution and provide valuable insights for the development of effective pollution control strategies.

The persistence of smoke VOCs indoors: Partitioning, surface cleaning, and air cleaning in a smoke-contaminated house

Wildfires are increasing in frequency, raising concerns that smoke can permeate indoor environments and expose people to chemical air contaminants. To study smoke transformations in indoor environments and evaluate mitigation strategies, we added smoke to a test house. Many volatile organic compounds (VOCs) persisted days following the smoke injection, providing a longer-term exposure pathway for humans. Two time scales control smoke VOC partitioning: a faster one (1.0 to 5.2 hours) that describes the time to reach equilibrium between adsorption and desorption processes and a slower one (4.8 to 21.2 hours) that describes the time for indoor ventilation to overtake adsorption-desorption equilibria in controlling the air concentration. These rates imply that vapor pressure controls partitioning behavior and that house ventilation plays a minor role in removing smoke VOCs. However, surface cleaning activities (vacuuming, mopping, and dusting) physically removed surface reservoirs and thus reduced indoor smoke VOC concentrations more effectively than portable air cleaners and more persistently than window opening.

Manipulation of Ion Conversion in Dichloromethane-Enhanced Vacuum Ultraviolet Photoionization Mass Spectrometry of Oxygenated Volatile Organic Compounds

The ion conversion processes in CH2Cl2-enhanced vacuum ultraviolet photoionization of oxygenated volatile organic compounds (OVOCs) have been systematically studied by regulating the pressure, humidity, and reaction time in the ionization source of a time-of-flight mass spectrometer. As the ionization source pressure increased from 100 to 1100 Pa, the main characteristic ions changed from CH2Cl+ to CH2Cl+(H2O), CH2OH+, and C2H4OH+ and then to the hydrated hydronium ions H3O+(H2O)n (n = 1, 2, 3). The total ion current (TIC) almost remained unchanged even if the humidity increased from 44 to 3120 ppmv, indicating interconversion between ions through ion-molecule reactions. The intensity of protonated methanol/ethanol (sample S) ion was almost linearly correlated with the intensity of H3O+(H2O)n, which pointed to the proton transfer reaction (PTR) mechanism. The reaction time was regulated by the electric field strength in the ionization region. The intensity variation trends of different ions with the reaction time indicated that a series of step-by-step ion-molecule reactions occurred in the ionization source, i.e., the primary ion CH2Cl+ reacted with H2O and converted to the intermediate product ions CH2OH+ and C2H4OH+, which then further reacted with H2O and led to the production of H3O+, and finally, the protonated sample ion SH+ was obtained through PTR with H3O+, as the ion-molecule reactions progressed. This study provides valuable insights into understanding the formation mechanism of some unexpected intermediate product ions and hydrated hydronium ions in dopant-enhanced VUV photoionization and also helps to optimize experimental conditions to enhance the sensitivity of OVOCs.

Ultrahigh Sensitivity PTR-MS Instrument with a Well-Defined Ion Chemistry

Proton-transfer-reaction mass spectrometry (PTR-MS) is widely used for measuring organic trace gases in air. In traditional PTR-MS, both nonpolar and polar analytes are ionized with unit efficiency, as predicted from ion-molecule collision theories. This well-defined ion chemistry allows for direct quantification of analytes without prior calibration and therefore is an important characteristic of PTR-MS. In an effort to further increase the sensitivity, recently developed ultrahigh sensitivity chemical ionization mass spectrometry (CIMS) analyzers have, however, been reported to have sacrificed unit ionization efficiency for selected analytes or classes of analytes. We herein report on the development of a novel ultrasensitive PTR-MS instrument, the FUSION PTR-TOF 10k, which exhibits the same universal unit response as conventional PTR-MS analyzers. The core component of this analyzer is the newly designed FUSION ion-molecule reactor, which is a stack of concentric ring electrodes generating a static longitudinal electric field superimposed by a focusing transversal radiofrequency (RF) field. The FUSION PTR-TOF 10k instrument is equipped with an improved ion source, capable of switching between different reagent ions (H3O+, O2+, NO+, NH4+) in less than one second. The improved time-of-flight mass spectrometer analyzes m/z signals with a mass resolution in the 10000-15000 range. FUSION PTR-TOF 10k achieves sensitivities up to 80000 cps ppbV-1 and detection limits down to 0.5 pptV for a 1 s measurement time. We show time-series of naphthalene and 13C-napthalene as measured in ambient air in Innsbruck for demonstrating the sub-pptV detection capability of this novel FUSION PTR-TOF 10k.

Direct mass spectrometry analysis of exhaled human breath in real-time

The molecular composition of exhaled human breath can reflect various physiological and pathological conditions. Considerable progress has been achieved over the past decade in real-time analysis of exhaled human breath using direct mass spectrometry methods, including selected ion flow tube mass spectrometry, proton transfer reaction mass spectrometry, extractive electrospray ionization mass spectrometry, secondary electrospray ionization mass spectrometry, acetone-assisted negative photoionization mass spectrometry, atmospheric pressure photoionization mass spectrometry, and low-pressure photoionization mass spectrometry. Here, recent developments in direct mass spectrometry analysis of exhaled human breath are reviewed with regard to analytical performance (chemical sensitivity, selectivity, quantitative capabilities) and applications of the developed methods in disease diagnosis, targeted molecular detection, and real-time metabolic monitoring.

Long-term in situ air quality assessment in closed environments: A gas chromatography-ion mobility spectrometry applicability study

Contemporary life is mostly spent in indoor spaces like private houses, workplaces, vehicles and public facilities. Nonetheless, the air quality in these closed environments is often poor which leads to people being exposed to a vast range of toxic and hazardous compounds. Volatile organic compounds (VOCs) are among the main factors responsible for the lack of air quality in closed spaces and, in addition, some of them are particularly hazardous to the human organism. Considering this fact, we conducted daily in situ air analyses over 1 year using a gas chromatography-ion mobility spectrometry (GC-IMS) device in an indoor location. The obtained results show that 10 VOCs were consistently present in the indoor air throughout the entire year, making them particularly important for controlling air quality. All of these compounds were successfully identified, namely acetic acid, acetone, benzene, butanol, ethanol, isobutanol, propanoic acid, propanol, 2-propanol and tert-butyl methyl ether. The behaviour of the total VOCs (tVOCs) intensity during the period of analysis and the relative variation between consecutive months were studied. It was observed that the overall trend of tVOCs closely mirrored the variation of air temperature throughout the year suggesting their strong correlation. The results obtained from this study demonstrate the high quality and relevance of the data, highlighting the suitability of GC-IMS for in situ long-term air quality assessment in indoor environments and, consequently, for identifying potential health risks for the human organism in both short-term and long-term exposure scenarios.

Analysis of Volatile Esters and Alkanoic Acids by an Atmospheric Pressure Corona Discharge Ionization Collision-Induced Dissociation Mass Spectrometry in Positive-Ion Mode: Ionization, Fragmentation Patterns, and Discrimination between Isomeric Compounds

The ionization and fragmentation patterns of 24 compounds with elemental composition of CmH2mO2, including isomeric esters and alkanoic acids, were investigated by atmospheric pressure corona discharge ionization collision-induced dissociation (CID) mass spectrometry in the positive-ion mode. All compounds were ionized as protonated molecules and NH4+ adducts. In addition, fragment ions were observed in mass spectra of esters other than methyl esters, which are owing to the dissociation of the alkyl group in the alcohol side from the protonated molecules. In CID spectra, protonated alkanoic acids/methyl esters split off H2O/CH3OH and CO or the alkyl group in the acid side, depending on the carbon chain length. Protonated esters (other than methyl esters) mainly fragmented the alkyl group in the alcohol side. These general rules on ionization and fragmentation patterns can provide relevant information on the discrimination of isomers.

Temporal variations of volatile organic compounds inside the cabin of a new electric vehicle under different operation modes during winter using proton transfer reaction time-of-flight mass spectrometry

Transportation is globally becoming more vehicle-dependent as public awareness towards the health risks caused by cabin-emitted volatile organic compounds (VOCs) increases. Therefore, the need for quantifying their concentration increases as well. This study measured the real-time VOCs in a new mini-truck-type electric vehicle cabin using a proton transfer reaction time-of-flight mass spectrometry under varying cabin heating conditions during winter. A total of 246 ions were detected between m/z 30 and 250, 82 of which were quantified. The total ion count in the cabin was double that of the ambient air. Morning-to-noon concentration of total VOCs increased 2.5 times in the cabin under solar exposure (164.47-405.92 µg·m^-3). Additionally, 12 VOCs that either had higher indoor-to-outdoor ratios or globally regulated chosen to investigate the effects of cabin air conditions. Heater operation immediately increased concentrations of some VOCs by 54.62%. Furthermore, blocking solar exposure from windows reduced VOC emissions during heater off and on scenarios by 35.49% and 65.42%, respectively, indicating that window coverage also provided insulation against heat loss. Finally, the fresh air reduced cabin VOCs by 62.83% due to ambient air inflow. However, cabin concentrations remained higher than those of ambient air.

Characterization of PFAS air emissions from thermal application of fluoropolymer dispersions on fabrics

During thermal processes utilized in affixing fluoropolymer coatings dispersion to fibers and fabrics, coating components are vaporized. It is suspected that per- and polyfluoroalkyl substances (PFAS) from the dispersions may undergo chemical transformations at the temperatures used, leading to additional emitted PFAS thermal byproducts. It is important to characterize these emissions to support evaluation of the resulting environmental and health impacts. In this study, a bench-scale system was built to simulate this industrial process via thermal application of dispersions to fiberglass utilizing relevant temperatures and residence times in sequential drying, baking, and sintering steps. Experiments were performed with two commercially available dispersions and a simple model mixture containing a single PFAS (6:2 fluorotelomer alcohol [6:2 FTOH]). Vapor-phase emissions were sampled and characterized by several off-line and real-time mass spectrometry techniques for targeted and nontargeted PFAS. Results indicate that multiple PFAS thermal transformation products and multiple nonhalogenated organic species were emitted from the exit of the high temperature third (sintering) furnace when 6:2 FTOH was the only PFAS present in the aqueous mixture. This finding supports the hypothesis that temperatures typical of these industrial furnaces may also induce chemical transformations within the fluorinated air emissions. Experiments using the two commercial fluoropolymer dispersions indicate air emissions of part-per-million by volume (ppmv) concentrations of heptafluoropropyl-1,2,2,2-tetrafluoroethyl ether (Fluoroether E1), as well as other PFAS at operationally relevant temperatures. We suspect that E1 is a direct thermal decomposition product (via decarboxylation) of 2,3,3,3-tetrafluoro-2-(heptafluoropropoxy)propanoic acid (commonly referred to as HFPO-DA) present in the dispersions. Other thermal decomposition products, including the monomer, tetrafluoroethene, may originate from the PFAS used to stabilize the dispersion or from the polymer particles in suspension. This study represents the first researcher-built coating application simulator to report nontargeted PFAS emission characterization, real-time analyses, and the quantification of 30 volatile target PFAS.Implications: Thermal processes used to affix fluoropolymers to fabrics are believed to be a source of PFAS air emissions. These coating operations are used by many large and small manufacturers and typically do not currently require any air emissions control. This research designed and constructed a bench-scale system that simulates these processes and used several off-line and advanced real-time mass spectroscopy techniques to characterize PFAS air emissions from two commercial fluoropolymer dispersions. Further, as the compositions of commercial dispersions are largely unknown, a model three-component solution containing a single PFAS was used to characterize emissions of multiple PFAS thermal transformation products at operationally relevant conditions. This research shows that fluoropolymer fabric coating facilities can be sources of complex mixtures of PFAS air emissions that include volatile and semivolatile PFAS present in the dispersions, as well as PFAS byproducts formed by the thermal transformation of fluorocarbon and hydrocarbon species present in these dispersions.

Policy-Related Gains in Urban Air Quality May Be Offset by Increased Emissions in a Warming Climate

Air quality policies have made substantial gains by reducing pollutant emissions from the transportation sector. In March 2020, New York City's activities were severely curtailed in response to the COVID-19 pandemic, resulting in 60-90% reductions in human activity. We continuously measured major volatile organic compounds (VOCs) during January-April 2020 and 2021 in Manhattan. Concentrations of many VOCs decreased significantly during the shutdown with variations in daily patterns reflective of human activity perturbations, resulting in a temporary ∼28% reduction in chemical reactivity. However, the limited effect of these dramatic measures was outweighed by larger increases in VOC-related reactivity during the anomalously warm spring 2021. This emphasizes the diminishing returns from transportation-focused policies alone and the risk of increased temperature-dependent emissions undermining policy-related gains in a warming climate.

A Mid-Infrared Quantum Cascade Laser Ultra-Sensitive Trace Formaldehyde Detection System Based on Improved Dual-Incidence Multipass Gas Cell

Formaldehyde (HCHO) is a tracer of volatile organic compounds (VOCs), and its concentration has gradually decreased with the reduction in VOC emissions in recent years, which puts forward higher requirements for the detection of trace HCHO. Therefore, a quantum cascade laser (QCL) with a central excitation wavelength of 5.68 μm was applied to detect the trace HCHO under an effective absorption optical pathlength of 67 m. An improved, dual-incidence multi-pass cell, with a simple structure and easy adjustment, was designed to further improve the absorption optical pathlength of the gas. The instrument detection sensitivity of 28 pptv (1σ) was achieved within a 40 s response time. The experimental results show that the developed HCHO detection system is almost unaffected by the cross interference of common atmospheric gases and the change of ambient humidity. Additionally, the instrument was successfully deployed in a field campaign, and it delivered results that correlated well with those of a commercial instrument based on continuous wave cavity ring-down spectroscopy (R² = 0.967), which indicates that the instrument has a good ability to monitor ambient trace HCHO in unattended continuous operation for long periods of time.

Unexpectedly Efficient Aging of Organic Aerosols Mediated by Autoxidation

Multiphase oxidative aging is a ubiquitous process for atmospheric organic aerosols (OA). But its kinetics was often found to be slow in previous laboratory studies where high hydroxyl radical concentrations ([^•OH]) were used. In this study, we performed heterogeneous oxidation experiments of several model OA systems under varied aging timescales and gas-phase [^•OH]. Our results suggest that OA heterogeneous oxidation may be 2-3 orders of magnitude faster when [^•OH] is decreased from typical laboratory flow tube conditions to atmospheric levels. Direct laboratory mass spectrometry measurements coupled with kinetic simulations suggest that an intermolecular autoxidation mechanism mediated by particle-phase peroxy radicals greatly accelerates OA oxidation, with enhanced formation of organic hydroperoxides, alcohols, and fragmentation products. With autoxidation, we estimate that the OA oxidation timescale in the atmosphere may be from less than a day to several days. Thus, OA oxidative aging can have greater atmospheric impacts than previously expected. Furthermore, our findings reveal the nature of heterogeneous aerosol oxidation chemistry in the atmosphere and help improve the understanding and prediction of atmospheric OA aging and composition evolution.

VOC characteristics and their source apportionment in a coastal industrial area in the Yangtze River Delta, China

Volatile organic compounds (VOCs) are important precursors of secondary organic compounds and ozone, which raise major environmental concerns. To investigate the VOC emission characteristics, measurements of VOCs based on proton transfer reaction-mass spectrometry during 2017 were conducted in a coastal industrial area in Ningbo, Zhejiang Province, China. Based on seasonal variation in species concentration, the positive matrix factorization (PMF) receptor model was applied to apportion the sources of VOCs in each season. The PMF results revealed that unknown acetonitrile source, paint solvent, electronics industry, biomass burning, secondary formation and biogenic emission were mainly attributed to VOC pollution. Biomass burning and secondary formation were the major sources of VOCs and contributed more than 70% of VOC emissions in spring and autumn. Industry-related sources contributed 8.65%-31.2% of the VOCs throughout the year. The unknown acetonitrile source occurred in winter and spring, and contributed 7.6%-43.73% of the VOC emissions in the two seasons. Conditional probability function (CPF) analysis illustrated that the industry sources came from local emission, while biomass burning and biogenic emission mainly came from the northwest direction. The potential source contribution function (PSCF) model showed that secondary formation-related source was mainly from Jiangsu Province, northeastern China and the surrounding ocean. The potential source areas of unknown acetonitrile source were northern Zhejiang Province, southern Jiangsu Province and the northeastern coastal marine environments.

Rapid and non-invasive diagnosis of type 2 diabetes through sniffing urinary acetone by a proton transfer reaction mass spectrometry

Urinary acetone in urine is produced from fat metabolism in human body, which can be accelerated in diabetic patients because of insufficient utilization and storage of glucose. In this study, we tried to develop a novel diagnosis method of type 2 diabetes (T2D) through sniffing urinary acetone by a proton transfer reaction mass spectrometry (PTR-MS). A total of 180 T2D patients and 180 healthy volunteers were recruited from three hospitals for multicenter study. Urine samples were collected in the morning when donators were fasting and stored in glass bottles. Acetone in the headspace of these bottles was qualitatively and quantitatively detected by the PTR-MS in 8 h. Using a threshold of 690.1 ppbv, a diagnostic model was established using urinary acetone with an accuracy of 81.3% (sensitivity: 73.3%, specificity: 89.3%) in hospital Ⅰ. In the verification studies, the accuracies were 92.5% (sensitivity: 88.7%, specificity: 96.2%) in hospital Ⅱ and 83.7% (sensitivity: 76.9%, specificity: 90.4%) in hospital Ⅲ, respectively. The accuracy is comparable to that of clinically used diagnosis methods, fasting plasma glucose (FPG), oral glucose tolerance test (OGTT), and glycosylated hemoglobin A1c (HbA1c) test. The sensitivity for 35 newly diagnosed patients was 85.7%. The newly developed technology is completely non-invasive and much more rapid than clinical FPG, OGTT, and HbA1c tests. It has a promising prospect in clinical use. But the applicability in different human races still need more validations.

Concurrent dominant pathways of multifunctional products formed from nocturnal isoprene oxidation

Determination of dominant chemical pathways toward the formation of nocturnal secondary organic aerosols (SOA) remains ambiguous by which nitrogen oxides (NO_x) always affect oxidation of volatile alkenes. Here, comprehensive chamber simulations on dark isoprene ozonolysis were conducted under different nitrogen dioxides (NO₂) mixing ratios to exam multiple functionalized isoprene oxidation products. Aside from that the oxidation processes were concurrently driven by nitrogen radical (NO₃) and small hydroxyl radicals (OH), ozone (O₃) cycloaddition at isoprene was launched initially regardless of NO₂ to rapidly form first-generation oxidation products, i.e., carbonyls and Criegee intermediates (CI) referred to carbonyl oxides. They could further undergo complicated self- and cross-reactions to produce alkylperoxy radicals (RO₂). Corresponding to yields of the C₅H₁₀O₃ tracer, weak OH pathway at night was credited to ozonolysis of isoprene but suppressed by unique NO₃ chemistry. Following the ozonolysis of isoprene, NO₃ played a crucial supplementary role in nighttime SOA formation. The ensuing production of gas-phase nitrooxy carbonyls (the first-generation nitrates) became dominant in the production of a sizeable pool of organic nitrates (RO₂NO₂). By contrast, isoprene dihydroxy dinitrates (C₅H₁₀N₂O₈) were outstanding with the elevated NO₂, related to typical second-generation nitrates. As such, the yielding number concentrations of dark SOA were promoted to approximately 1.8 × 10⁴ cm^-3 but presented a nonlinear relation with excess high-NO₂ condition. This study provides valuable insights into importance of multifunctional organic compounds from alkene oxidation to constitute nighttime SOA.

Photolysis frequency of nitrophenols derived from ambient measurements

Nitrophenols, a class of important intermediate products from the oxidation of aromatics, can participate in photochemistry and influence the atmospheric oxidative capacity. However, the reported photolysis frequencies of nitrophenols show considerable discrepancies. Here, measurements of nitrophenol, and methyl nitrophenol using a proton-transfer-reaction time-of-flight mass spectrometer (PTR-ToF-MS) at both urban and regional sites in southern China are used to constrain photolysis frequencies of nitrophenols. Considerable concentrations with a campaign average of 58 ± 32 ppt for nitrophenol and 97 ± 59 ppt for methyl nitrophenol were observed at the regional site. Based on the in-situ measurement dataset, a steady-state calculation was performed along with a zero-dimensional box model to analyze the budgets of nitrophenols. The result indicates that both primary emission and photolysis have significant impacts on nitrophenols. Primary emission contributes up to 88 % of the total nitrophenols production while photolysis accounts for up to 98 % of the total removal rate. The dominant sink of nitrophenols is photolysis with a rate of about 3.5 % ± 1.3 % of j_NO2 for nitrophenol and 2.4 % ± 1.0 % of j_NO2 for methyl nitrophenol. The results of this study suggest that using advanced mass spectrometry to accurately measure ambient nitrophenols, supplemented by an observation-based box model for budget analysis, provides an important indication for determining photolysis rate constants of nitrophenols.

On-Site Detection of Volatile Organic Compounds (VOCs)

Volatile organic compounds (VOCs) are of interest in many different fields. Among them are food and fragrance analysis, environmental and atmospheric research, industrial applications, security or medical and life science. In the past, the characterization of these compounds was mostly performed via sample collection and off-site analysis with gas chromatography coupled to mass spectrometry (GC-MS) as the gold standard. While powerful, this method also has several drawbacks such as being slow, expensive, and demanding on the user. For decades, intense research has been dedicated to find methods for fast VOC analysis on-site with time and spatial resolution. We present the working principles of the most important, utilized, and researched technologies for this purpose and highlight important publications from the last five years. In this overview, non-selective gas sensors, electronic noses, spectroscopic methods, miniaturized gas chromatography, ion mobility spectrometry and direct injection mass spectrometry are covered. The advantages and limitations of the different methods are compared. Finally, we give our outlook into the future progression of this field of research.

Increasing role of phenolic oxidative branch in daytime oxidation process of aromatics in Chinese haze period

To understand the photooxidation mechanisms of aromatic compounds in the NOx-rich atmosphere, gaseous aromatics and their oxidization products (i.e., methyl glyoxal (MGLY), and nitrated phenols (NPs) including nitrophenols (NPhs) and methylnitrophenols (MNPs)) were measured with a 1-h time resolution on Chongming Island, a downwind region of the Yangtze River Delta (YRD) metropolitans of China in winter 2019 by using a proton-transfer-reaction mass spectrometer (PTR-MS). During the entire observation period, concentrations of the measured VOCs were 9.6 ± 7.1 ppbv for aromatics, 118 ± 59 pptv for MGLY, 36 ± 10 pptv for NPhs, and 9.3 ± 2.8 pptv for MNPs, respectively. Secondary NPs (SNPs) accounted for only 19-24 % of the total nitrated phenols during the clean and transition periods but increased to 44 % of the total on the hazy days. Moreover, the daytime mixing ratios of SNPs increased along with an increasing NO₂ concentration during the clean and transition periods, but in the haze period the daytime SNPs first increased along with the increasing NO₂ levels and then increased much more sharply when NO₂ was >25 ppbv. Such highly proportional and sharply increased daytime SNPs in the haze period indicated an enhanced phenolic oxidation under the high NOx conditions. In addition, the lack of correlations between aromatics and MGLY, increased MGLY_aro (MGLY produced by aromatics), and sharply increased ΔSNPs / Δ(benzene + toluene) further suggested that such an increasing role of the phenolic oxidative branch in the daytime oxidation process of aromatics during the YRD haze period was caused by the strong atmospheric oxidation capacity and the high level of NOx.

Abatement of VOCs mixture of emerging concern by VUV-PCO process: From lab to pilot scale

As a kind of emerging pollutant, volatile organic compounds (VOCs) are getting increasing attention due to their contribution to the formation of atmospheric haze and O₃. Photocatalytic oxidation under vacuum ultraviolet photocatalytic oxidation (VUV-PCO) presents a promising method for VOCs degradation, but it is seldom studied for VOCs compound and the mechanism is still elusive. Herein, typical VOCs such as toluene and ethyl acetate were degraded separately or together in VUV system and in VUV-PCO system with the designed trifunctional catalyst Mn/TiO₂/ZSM-5. Intermediates were recognized by PTR-TOF-MS. It is found that dual VOCs mixture outperformed single VOCs under both VUV process and VUV-PCO process. Possible degradation mechanisms were proposed. To explore the potential practicality of VUV-PCO technology, scale-up synthesis of Mn/TiO₂/ZSM-5 on ceramic foams was successfully carried out and assembled into a homemade pilot-scale VUV-PCO equipment for the control of simulated VOCs complex (toluene, ethyl acetate, ethanol, and acetone). Pilot-scale catalytic testing with the monolithic catalysts achieved high removal efficiency (over 90 % efficiency after two cycles of regeneration) and confirmed the practical application possibility of VUV-PCO technology in multiple VOCs degradation. This work probes into the VUV-PCO technology applicability from lab scale to pilot scale and promotes the understanding of VUV and VUV-PCO in VOCs complex decomposition.

Direct detection of acetonitrile at the pptv level with photoinduced associative ionization time-of-flight mass spectrometry

Photoionization mass spectrometry (PI-MS) has become a versatile tool in the real-time analysis of volatile organic compounds (VOCs) from the atmosphere or exhaled breath. However, some key species, e.g., acetonitrile, are hard to measure due to their higher ionization energies than photon energy. In this study, the direct and sensitive detection of gaseous acetonitrile based on a photoinduced associative ionization (PAI) reaction was investigated with a laboratory-built PAI time-of-flight mass spectrometer (PAI-TOFMS). By doping CH₂Cl₂ in the photoionization ion source, the mass signal of acetonitrile that cannot be effectively obtained by photoionization appeared with an extremely high intensity through the PAI reaction between acetonitrile, CH₂Cl₂, and residual H₂O in the system. Though the moisture in the sample gas has an evident impact on the detection efficiency of acetonitrile, with a relative signal intensity decreasing from 100% under dry conditions to 60% at saturated relative humidity, excellent detection sensitivity was still obtained for gaseous acetonitrile in different matrixes. The sensitivity calibration experiment showed that the detection sensitivities of acetonitrile in N₂ buffer gas, exhaled gas, and outdoor air were 682.4 ± 5.2, 17.0 ± 0.7, and 23.9 ± 0.2 counts pptv^-1, respectively, with an analysis time of 10 s. The corresponding 3σ LODs reached 0.22, 8.82, and 6.28 pptv, which are equivalent to 0.40, 16.0, and 11.4 ng m^-3. The performance of the PAI-TOFMS was first demonstrated by analyzing exhaled acetonitrile from healthy non-smokers and smokers and continuous monitoring of acetonitrile in outdoor air. In summary, this study provides a new and highly sensitive method for the real-time detection of acetonitrile through mass spectrometry.

Investigation into the differences and relationships between gasSOA and aqSOA in winter haze pollution on Chongming Island, Shanghai, based on VOCs observation

To investigate the formation of secondary organic aerosol (SOA) under current atmospheric conditions, we conducted a field observation of SOA precursors in the downwind region of the Yangtze River Delta (YRD) in winter 2019 using a variety of offline and online instruments. During the entire observation period, the averaged fine particulate SOA was 7.9 ± 2.3 μg m^-3, with precursor concentrations of 31 ± 11 ppbv for the measured volatile organic compounds (VOCs) and 16 ± 12 ppbv for NOx. Compared to those on the clean days, SOA on the haze days increased by a factor of 1.6, while the VOC and NOx increased by a factor of 1.3 and 2.0, respectively. Aerosol liquid water content (ALWC) and oxygenated VOCs (OVOCs, including acetaldehyde, formic acid, acetone, acetic acid, methyl ethyl ketone, and methylglyoxal) relationships suggested that the gasSOA and aqSOA occurred simultaneously on Chongming Island in winter. The gasSOA was primarily formed by the oxidation of aromatics and NOx at low RH (RH < 80%) conditions. In contrast, the aqSOA was formed under higher RH (RH > 80%) conditions via a combination of daytime photochemical aqueous phase processes of water-soluble OVOCs and nocturnal dark aqueous phase processes of primary emissions from biomass. The inversed higher mass ratio of NACs to (benzene + toluene) and nitrogen oxidation ratio (NOR) in the daytime during the gasSOA-dominated haze periods indicated that gasSOA could be transformed to aqSOA at high NOx levels. Our results also suggested the importance of NOx and VOC reduction measures in directly mitigating gasSOA and indirectly mitigating aqSOA during winter haze pollution.

Bridged-ozonolysis of mixed aromatic hydrocarbons and organic amines: Inter-inhibited decay rate, altered product yield and synergistic-effect-enhanced secondary organic aerosol formation

Ozonolysis of aromatic hydrocarbons (AHs) or organic amines (OAs) occurs via different transformation processes, with varying rate constants and contributions to secondary organic aerosol (SOA) formation. However, to date no data is available on the ozonolysis of mixtures of AHs and OAs. This study investigated the kinetics, products and SOA yield from ozonolysis of mixture of trimethylamine with styrene, toluene or m-xylene. In the mixed system, the decay rates of styrene and trimethylamine were (1.32 ± 0.26) × 10^-4 s^-1 and (0.80 ± 0.02) × 10^-4 s^-1, decreasing up to 36.5 % and 54.4 % compared with their respective individual systems. This inter-inhibition of decay rates increased the yield of main products from styrene (i.e. benzaldehyde) by 23.5 % and trimethylamine (i.e. nitromethane) by 346.4 %. Ozonolysis of styrene or trimethylamine produced formaldehyde, which acted as a bridged product connecting the ozonolysis pathways of these two substrates, altering the yields of all products. Ozonolysis of styrene to benzaldehyde determined the increase of SOA particle number concentration (from 9.5 × 10⁵ to 1.9 × 10⁶ particles cm^-3), while trimethylamine ozonolysis to N, N-dimethylformamide contributed to synergistic-effect-enhanced SOA yield (from (64.3 ± 3.5)% to (68.1 ± 4.8)%). The findings provide a novel insight into the kinetics and mechanism of ozonolysis, as well as the resulting SOA formation from mixtures of AHs and OAs, helping to comprehensively understand the transformation and fate of organics in real atmospheric environments.

Volatile Organic Compound Fragmentation in the Afterglow of Pulsed Glow Discharge in Ambient Air

Glow discharge (GD) source gained an increased level of attention in relation to the analysis of volatile organic compounds (VOCs) since past work showed that this soft ionization method allowed direct analysis of VOCs with minimal fragmentation, however, the issue of fragmentation was not previously studied in detail. The aim of the present work was to investigate the effect of discharge conditions on VOC fragmentation in the system consisting of the cell with pulsed glow discharge and a time-of-flight mass spectrometer. Ionization of VOCs of different classes (hydrocarbons, alcohols, esters, and carboxylic acids) was investigated. A copper cathode with flat geometry was used. VOCs were ionized in the afterglow of short pulse glow discharge in the air. The use of discharge afterglow significantly reduces or eliminates the effects of ionization mechanisms other than Penning process, in particular, electron ionization. This significantly reduced VOC fragmentation and provided rather low limits of detection. Specific cluster formation was observed for alcohols and esters, which may facilitate their identification.

Increased Sensitivity in Proton Transfer Reaction Mass Spectrometry by Using a Novel Focusing Quadrupole Ion Funnel

Sensitivity enhancement in proton transfer reaction mass spectrometry (PTR-MS) is an important development direction. We developed a novel drift tube called a focusing quadrupole ion funnel (FQ-IF) for use in PTR-MS to improve the sensitivity. The FQ-IF consists of 20 layers of stainless steel electrodes, and each layer has 4 quarter rings. The first 6 layers have a constant inner hole diameter of 22 mm; the latter 14 layers taper the inner diameter down to 8 mm. The FQ-IF drift tube can also operate in the direct current (DC) mode (similar to a conventional drift tube) and ion funnel (IF) mode (similar to a conventional ion funnel drift tube) by changing the voltage loading method. The simulation results show that the transmission efficiency of the FQ-IF is significantly improved compared to that of the other two modes. Further experiments show that the product ions of limonene tend to convert into smaller m/z fragment ions at higher voltages for the DC and IF modes. However, unlike the DC and IF modes, the distribution of product ions is stable at higher voltages for the FQ-IF. In other words, a higher RF voltage for the FQ-IF will not increase the collision energy of ions. In addition, the improvements in sensitivity for the FQ-IF range from 13.8 to 87.9 times compared to the DC mode and from 1.7 to 4.8 times compared to the IF mode for the 12 test compounds. The improvements in the limit of detection (LOD) for the FQ-IF range from 2.7 to 35.7 times compared to the DC mode. The FQ-IF provides a valuable reference for improving the sensitivity of PTR-MS and other mass spectrometers.