Assessing Human Health Risks from Per- and Polyfluoroalkyl Substance (PFAS)-Impacted Vegetable Consumption: A Tiered Modeling Approach

Drivers of change behind the spatial distribution and fate of typical trace organic pollutants in fresh waste leachate across China

There have been growing concerns regarding the health and environmental impacts of trace organic pollutants (TOPs). However, fresh leachate from municipal solid waste (MSW) has been overlooked as a potential reservoir of TOPs. Therefore, we investigated 90 legacy and emerging TOPs in fresh leachate from 14 provinces and municipalities in China. Additionally, the fate and final discharge impacts of TOPs in 14 leachate treatment systems were analyzed. The results revealed that the detection rate of 90 TOPs was over 50 % in all samples. Notably, polychlorinated biphenyls, banned for 40 years, were frequently detected in fresh leachate. The concentration of pseudo-persistent TOPs (105-107 ng/L) is significantly higher than that of persistent TOPs (102-104 ng/L). Spatial distribution patterns of TOPs in fresh leachate suggest that economy, population, climate, and policies impact TOPs discharge from MSW. For example, economically developed and densely populated areas displayed higher TOPs concentrations, whereas warmer climates facilitate TOPs leaching from MSW. We confirmed that waste classification policies were a key driver of the decline in multiple TOPs in leachate. Mass balance analysis shows that the final effluent and sludge from current dominant leachate treatment systems contain refractory TOPs, especially perfluoroalkyl acids, which must be prioritized for control. This paper was the first comprehensive investigation of multiple TOPs in fresh leachate at a large geographic scale. The factors affecting the occurrence, spatial distribution, and fate of TOPs in fresh leachate were revealed. It provides a valuable reference for the establishment of policies for the management of TOPs in MSW and the associated leachate.

Exploring the variability of PFAS in urban sewage: a comparison of emissions in commercial versus municipal urban areas

Per- and polyfluoroalkyl substances (PFAS) are recognized for their persistence and ubiquitous occurrence in different environmental compartments. Conventional wastewater treatment plants (WWTPs) cannot effectively remove PFAS from wastewater, and a better understanding of the occurrence and sources of PFAS in this medium would enable effective source abatement. We compared sewage from urban areas exhibiting differentiating characteristics with respect to activities in their catchments. These included a sewer that serves primarily a municipal area, with no commercial activities involving PFAS emissions being identified, another sewer with a strong influence of commercial activities potentially related to PFAS emissions, and the influent of the whole city sewage network. The year-long monitoring campaign consisted of flow-proportional, monthly composite samples and targeted analysis of 29 PFAS compounds. Principal component analysis was used to investigate the relationships between selected PFAS and standard water quality parameters such as ammonium, a known tracer of urine and thus of typical municipal wastewater. Notable findings were seen for PFOS and 6:2 FTS, whose concentrations were most negatively correlated with ammonium. Ammonium concentration data allowed for a normalized per-person median load calculation, which resulted in loads of the observed PFAS ranging from below 0.4 up to 4.7 μg per person per day. Both the commercial area sewer and the city influent exhibited significantly higher (p < 0.05) median loads (>0.9 μg per person per day) in the case of 6:2 FTS and PFOS, compared to the municipal sewer (<0.6 μg per person per day). No statistically significant difference was found for other compounds, such as PFBA, PFHxA, PFOA, and PFHxS. We argue that this approach demonstrates that PFAS can differ in speciation and quantity within an urban wastewater setting, and consideration of both municipal and commercial activities is needed for a proper understanding of sources and emission pathways within the urban environment.

Unveiling the occurrence and ecological risks of triclosan in surface water through meta-analysis

Triclosan, a widely used antimicrobial agent, is frequently detected in aquatic environments, prompting concerns about its toxic effects on aquatic species. Understanding its occurrence and ecological risks is crucial for mitigating triclosan contamination, formulating water quality criteria, and protecting aquatic organisms. This study systematically analyzed triclosan occurrence and ecological risks in surface water across China using the Risk Quotient methodology. A total of 139 and 134 data points were collected for triclosan concentrations and toxicities of aquatic organisms, respectively. Triclosan concentrations in surface water across China ranged from 0.06 to 612 ng/L. Higher triclosan levels were observed in Eastern China compared to Central and Western China, with the average concentration being 4.21- and 7.25-fold higher, respectively. Specifically, the Southeast Rivers Basin (132.98 ng/L) and Pearl River Basin (86.64 ng/L) exhibited maximum triclosan levels, 2.57-19.58 times higher than the other river basins. Further analysis revealed elevated triclosan concentrations in small rivers and surface water within residential areas, with values of 246.1 ng/L in Zhejiang, 86.64 ng/L in Guangdong, 67.58 ng/L in Jiangsu, and 127.99 ng/L in Beijing. Additionally, species sensitivity distribution curves indicated that algae was the most sensitive species to triclosan exposure, followed by invertebrates, while fish exhibited the highest tolerance. The Predicted No-Effect Concentration for the algae, invertebrates, fish, and combined aquatic species were determined to be 0.09, 2.95, 4.44, and 1.51 μg/L, respectively. The occurrence of triclosan in surface water across China did not pose widespread ecological risks. However, targeted monitoring and mitigation efforts are needed, especially in highly developed regions. This study provides crucial insights into the status of triclosan contaminations and risks in China and contributes valuable knowledge to global efforts aimed at safeguarding aquatic ecosystems.

Per- and polyfluoroalkyl substances (PFAS) in homegrown crops: Accumulation and human risk assessment

Homegrown crops can present a significant exposure source of per- and polyfluoroalkyl substances (PFAS) to humans. Field studies studying PFAS accumulation in multiple vegetable food categories and examining the potential influence of soil characteristics on vegetable bioavailability under realistic exposure conditions are very scarce. Crop PFAS accumulation depends on a complex combination of factors. The physicochemical differences among the numerous PFAS makes risk assessment very challenging. Thus, simplification of this complexity into key factors that govern crop PFAS accumulation is critical. This study analyzed 29 targeted legacy, precursor and emerging PFAS in the vertical soil profile (0-45 cm depth), rainwater and edible crop parts of 88 private gardens, at different distances from a major fluorochemical plant. Gardens closer to the plant site showed higher soil concentrations which could be linked with historical and recent industrial emissions. Most compounds showed little variation along the soil depth profile, regardless of the distance from the plant site, which could be due to gardening practices. Annual crops consistently accumulated higher sum PFAS concentrations than perennials. Highest concentrations were observed in vegetables, followed by fruits and walnuts. Single soil-crop relationships were weak, which indicated that other factors (e.g., porewater) may be better measures of bioavailability in homegrown crop accumulation. Regression models, which additionally considered soil characteristics showed limited predictive power (all R2 ≤ 35%), possibly due to low variability in crop concentrations. Human intake estimations revealed that the PFAS exposure risk via crop consumption was similar nearby and remotely from the plant site, although the contribution to the overall dietary exposure can be relatively large. The tolerable weekly intake was frequently exceeded with respect to fruit and vegetable consumption, thus potential health risks cannot be ruled out.

Emerging eco-friendly technologies for remediation of Per- and poly-fluoroalkyl substances (PFAS) in water and wastewater: A pathway to environmental sustainability

Per- and polyfluoroalkyl substances (PFAS) are rampant, toxic contaminants from anthropogenic sources, called forever chemicals for their recalcitrance. Although banned in several parts of the world for public health implications, including liver, kidney, and testicular diseases, PFAS are abundant in water sources due to easy dispersion. With chemical properties resulting from strong hydrophobic bonds, they defile many physicochemical removal methods. Though adsorption processes such as granular activated carbon (GAC) are widely used, they are marred by several limitations, including cost and secondary contamination. Thus, eco-friendly methods involving a synergy of the removal principles have been preferred for ease of use, cost-effectiveness, and near-zero effect on the environment. We present novel eco-friendly methods as the solution to PFAS remediation towards environmental sustainability. Current eco-friendly methods of PFAS removal from water sources, including electrocoagulation, membrane/filtration, adsorption, and phytoremediation methods, were highlighted, although with limitations. Novel eco-friendly methods such as microbial fuel cells, photoelectrical cells, and plasma treatment offer solutions to PFAS remediation and are quite efficient in terms of cost, result, and environmental sustainability. Overall, the successful integration of eco-friendly techniques in a seamless manner ensures the desired result. We also present a balanced position on the ecosystem impact of these ecofriendly methods, noting the successes towards environmental sustainability while exposing the gaps for further research.

Association between the dietary inflammatory index and serum perfluoroalkyl and polyfluoroalkyl substance concentrations: evidence from NANHES 2007-2018

Diet is an important source of perfluoroalkyl and polyfluoroalkyl substance (PFAS) exposure, and the dietary inflammatory index (DII) is a tool used to assess the inflammatory potential of an individual's diet. However, limited research has explored the association between the DII and PFAS exposure in humans. This study is the first to analyze the association between the five PFASs and DII using the National Health and Nutrition Examination Survey (NHANES) 2007-2018 database. Additionally, we assessed the interaction between the DII and PFASs regarding oxidative stress and inflammatory markers, including alkaline phosphatase, albumin, neutrophil count, lymphocyte count, total bilirubin, and serum iron based on a previous study. A series of covariates were included in the analysis to reduce the confounding bias. The study included 7773 and 5933 participants based on the different models. The DII was significantly associated with serum perfluorooctanoic acid, perfluorononanoic acid, perfluorooctane sulfonic acid, and sum-PFAS. Some of the food parameters used to calculate the DII also showed associations with special PFAS serum concentrations. Specifically, dietary fiber, n-3 polyunsaturated fatty acids, energy intake, and vitamin D were associated with more than three PFASs. Higher DII levels in participants were linked to a more significant association between bilirubin (the interaction P-value is not significant), alkaline phosphatase, serum iron, neutrophil counts, and some PFASs. In conclusion, this study clarified the association between the three PFASs and DII, highlighting the diverse effects of PFASs on oxidative stress and inflammatory markers across different DII levels.

Distribution, risk evaluation, and source allocation of cesium and strontium in surface soil in a mining city

Radioactive nuclides cesium (Cs) and strontium (Sr) possess long half-lives, with 135Cs at approximately 2.3 million years and 87Sr at about 49 billion years. Their persistent accumulation can result in long-lasting radioactive contamination of soil ecosystems. This study employed geo-accumulation index (Igeo), pollution load index (PLI), potential ecological risk index (PEPI), health risk assessment model (HRA), and Monte Carlo simulation to evaluate the pollution and health risks of Cs and Sr in the surface soil of different functional areas in a typical mining city in China. Positive matrix factorization (PMF) model was used to elucidate the potential sources of Cs and Sr and the respective contribution rates of natural and anthropogenic sources. The findings indicate that soils in the mining area exhibited significantly higher levels of Cs and Sr pollution compared to smelting factory area, agricultural area, and urban residential area. Strontium did not pose a potential ecological risk in any studied functional area. The non-carcinogenic health risk of Sr to the human body in the study area was relatively low. Because of the lack of parameters for Cs, the potential ecological and human health risks of Cs was not calculated. The primary source of Cs in the soil was identified as the parent material from which the soil developed, while Sr mainly originated from associated contamination caused by mining activities. This research provides data for the control of Cs and Sr pollution in the surface soil of mining city.

Considerations and challenges in support of science and communication of fish consumption advisories for per- and polyfluoroalkyl substances

Federal, state, tribal, or local entities in the United States issue fish consumption advisories (FCAs) as guidance for safer consumption of locally caught fish containing contaminants. Fish consumption advisories have been developed for commonly detected compounds such as mercury and polychlorinated biphenyls. The existing national guidance does not specifically address the unique challenges associated with bioaccumulation and consumption risk related to per- and polyfluoroalkyl substances (PFAS). As a result, several states have derived their own PFAS-related consumption guidelines, many of which focus on one frequently detected PFAS, known as perfluorooctane sulfonic acid (PFOS). However, there can be significant variation between tissue concentrations or trigger concentrations (TCs) of PFOS that support the individual state-issued FCAs. This variation in TCs can create challenges for risk assessors and risk communicators in their efforts to protect public health. The objective of this article is to review existing challenges, knowledge gaps, and needs related to issuing PFAS-related FCAs and to provide key considerations for the development of protective fish consumption guidance. The current state of the science and variability in FCA derivation, considerations for sampling and analytical methodologies, risk management, risk communication, and policy challenges are discussed. How to best address PFAS mixtures in the development of FCAs, in risk assessment, and establishment of effect thresholds remains a major challenge, as well as a source of uncertainty and scrutiny. This includes developments better elucidating toxicity factors, exposures to PFAS mixtures, community fish consumption behaviors, and evolving technology and analytical instrumentation, methods, and the associated detection limits. Given the evolving science and public interests informing PFAS-related FCAs, continued review and revision of FCA approaches and best practices are vital. Nonetheless, consistent, widely applicable, PFAS-specific approaches informing methods, critical concentration thresholds, and priority compounds may assist practitioners in PFAS-related FCA development and possibly reduce variability between states and jurisdictions. Integr Environ Assess Manag 2024;00:1-20. © 2024 SETAC.

The perils of poly- and perfluorinated chemicals on the reproductive health of humans, livestock, and wildlife

Poly- and perfluoroalkyl substances (PFAS) are a prominent class of persistent synthetic compound. The widespread use of these substances in various industrial applications has resulted in their pervasive contamination on a global scale. It is therefore concerning that PFAS have a propensity to accumulate in bodily tissues whereupon they have been linked with a range of adverse health outcomes. Despite this, the true extent of the risk posed by PFAS to humans, domestic animals, and wildlife remains unclear. Addressing these questions requires a multidisciplinary approach, combining the fields of chemistry, biology, and policy to enable meaningful investigation and develop innovative remediation strategies. This article combines the perspectives of chemists, soil scientists, reproductive biologists, and health policy researchers, to contextualise the issue of PFAS contamination and its specific impact on reproductive health. The purpose of this article is to describe the challenges associated with remediating PFAS-contaminated soils and waters and explore the consequences of PFAS contamination on health and reproduction. Furthermore, current actions to promote planetary health and protect ecosystems are presented to instigate positive social change among the scientific community.

Application of electron beam technology to decompose per- and polyfluoroalkyl substances in water

The widespread detection of per- and polyfluoroalkyl substances (PFAS) in environmental compartments across the globe has raised several health concerns. Destructive technologies that aim to transform these recalcitrant PFAS into less toxic, more manageable products, are gaining impetus to address this problem. In this study, a 9 MeV electron beam accelerator was utilized to treat a suite of PFAS (perfluoroalkyl carboxylates: PFCAs, perfluoroalkyl sulfonates, and 6:2 fluorotelomer sulfonate: FTS) at environmentally relevant levels in water under different operating and water quality conditions. Although perfluorooctanoic acid and perfluorooctane sulfonic acid showed >90% degradation at <500 kGy dose at optimized conditions, a fluoride mass balance revealed that complete defluorination occurred only at/or near 1000 kGy. Non-target and suspect screening revealed additional degradation pathways differing from previously reported mechanisms. Treatment of PFAS mixtures in deionized water and groundwater matrices showed that FTS was preferentially degraded (∼90%), followed by partial degradation of long-chain PFAS (∼15-60%) and a simultaneous increase of short-chain PFAS (up to 20%) with increasing doses. The increase was much higher (up to 3.5X) in groundwaters compared to deionized water due to the presence of PFAS precursors as confirmed by total oxidizable precursor (TOP) assay. TOP assay of e-beam treated samples did not show any increase in PFCAs, confirming that e-beam was effective in also degrading precursors. This study provides an improved understanding of the mechanism of PFAS degradation and revealed that short-chain PFAS are more resistant to defluorination and their levels and regulation in the environment will determine the operating conditions of e-beam and other PFAS treatment technologies.

Perfluorooctanesulfonic Acid Alters the Plant's Phosphate Transport Gene Network and Exhibits Antagonistic Effects on the Phosphate Uptake

Per- and polyfluoroalkyl substances (PFASs), with significant health risks to humans and wildlife, bioaccumulate in plants. However, the mechanisms underlying plant uptake remain poorly understood. This study deployed transcriptomic analysis coupled with genetic and physiological studies using Arabidopsis to investigate how plants respond to perfluorooctanesulfonic acid (PFOS), a long-chain PFAS. We observed increased expressions of genes involved in plant uptake and transport of phosphorus, an essential plant nutrient, suggesting intertwined uptake and transport processes of phosphorus and PFOS. Furthermore, PFOS-altered response differed from the phosphorus deficiency response, disrupting phosphorus metabolism to increase phosphate transporter (PHT) transcript. Interestingly, pht1;2 and pht1;8 mutants showed reduced sensitivity to PFOS compared to that of the wild type, implying an important role of phosphate transporters in PFOS sensing. Furthermore, PFOS accumulated less in the shoots of the pht1;8 mutant, indicating the involvement of PHT1;8 protein in translocating PFOS from roots to shoots. Supplementing phosphate improved plant's tolerance to PFOS and reduced PFOS uptake, suggesting that manipulating the phosphate source in PFOS-contaminated soils may be a promising strategy for minimizing PFOS uptake by edible crops or promoting PFOS uptake during phytoremediation. This study highlighted the critical role of phosphate sensing and transport system in the uptake and translocation of PFOS in plants.

Occurrence, fate, and remediation for per-and polyfluoroalkyl substances (PFAS) in sewage sludge: A comprehensive review

Addressing per-and polyfluoroalkyl substances (PFAS) contamination is an urgent environmental concern. While most research has focused on PFAS contamination in water matrices, comparatively little attention has been given to sludge, a significant by-product of wastewater treatment. This critical review presents the latest information on emission sources, global distribution, international regulations, analytical methods, and remediation technologies for PFAS in sludge and biosolids from wastewater treatment plants. PFAS concentrations in sludge matrices are typically in hundreds of ng/g dry weight (dw) in developed countries but are rarely reported in developing and least-developed countries due to the limited analytical capability. In comparison to water samples, efficient extraction and cleaning procedures are crucial for PFAS detection in sludge samples. While regulations on PFAS have mainly focused on soil due to biosolids reuse, only two countries have set limits on PFAS in sludge or biosolids with a maximum of 100 ng/g dw for major PFAS. Biological technologies using microbes and enzymes present in sludge are considered as having high potential for PFAS remediation, as they are eco-friendly, low-cost, and promising. By contrast, physical/chemical methods are either energy-intensive or linked to further challenges with PFAS contamination and disposal. The findings of this review deepen our comprehension of PFAS in sludge and have guided future research recommendations.

Efficient and fast remediation of soil contaminated by per- and polyfluoroalkyl substances (PFAS) by high-frequency heating

This study presents a novel thermal technology (high-frequency heating, HFH) for the decontamination of soil containing per- and polyfluoroalkyl substances (PFAS) and aqueous film-forming foams (AFFFs). Ultra-fast degradation of short-chain PFAS, long-chain homologs, precursors, legacy PFAS, emerging PFAS was achieved in a matter of minutes. The concentrations of PFAS and the soil type had a negligible impact on degradation efficiency, possibly due to the ultra-fast degradation rate overwhelming potential differences. Under the current HFH experiment setup, we achieved near-complete degradation (e.g., >99.9%) after 1 min for perfluoroalkyl carboxylic acids and perfluoroalkyl ether carboxylic acids and 2 min for perfluoroalkanesulfonic acids. Polyfluoroalkyl precursors in AFFFs were found to degrade completely within 1 min of HFH; no residual cationic, zwitterionic, anionic, or non-ionic intermediate products were detected following the treatment. The gaseous byproducts were considered. Most of gaseous organofluorine products of PFAS at low-and-moderate temperatures disappeared when temperatures reached 890 °C, which is in the temperature zone of HFH. For the first time, we demonstrated minimal loss of PFAS in water during the boiling process, indicating a low risk of PFAS entering the atmosphere with the water vapor. The findings highlight HFH its potential as a promising remediation tool for PFAS-contaminated soils.

Effects of perfluorooctanoic acid and perfluorooctane sulfonic acid on microbial community structure during anaerobic digestion

Per- and polyfluoroalkyl substances (PFASs) are recalcitrant organic pollutants, which accumulate widely in aquatic and solid matrices. Anaerobic digestion (AD) is one of possible options to manage organic wastes containing PFASs, however, the impacts of different types of PFAS on AD remains unclear. This study aimed to critically investigate the effects of two representative PFAS compounds, i.e., perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), on the AD performance and microbial community structure. 100 mg/L of both PFOA and PFOS considerably inhibited the AD performance and changed the microbial community structure. Especially, PFOA was more toxic to bacterial and archaeal activity than PFOS, which was reflected in AD performance. In addition, the sulfonic acid group in PFOS affected the changes in microbial community structure by inducing abundant sulfate reducing bacteria (i.e., Desulfobacterota). This study provides a significant reference to the response of AD system on different PFAS types and dosage.

Beyond Conventional Density Functional Theory: Advanced Quantum Dynamical Methods for Understanding Degradation of Per- and Polyfluoroalkyl Substances

Computational chemistry methods, such as density functional theory (DFT), have now become more common in environmental research, particularly for simulating the degradation of per- and polyfluoroalkyl substances (PFAS). However, the vast majority of PFAS computational studies have focused on conventional DFT approaches that only probe static, time-independent properties of PFAS near stationary points on the potential energy surface. To demonstrate the rich mechanistic information that can be obtained from time-dependent quantum dynamics calculations, we highlight recent studies using these advanced techniques for probing PFAS systems. We briefly discuss recent applications ranging from ab initio molecular dynamics to DFT-based metadynamics and real-time time-dependent DFT for probing PFAS degradation in various reactive environments. These quantum dynamical approaches provide critical mechanistic information that cannot be gleaned from conventional DFT calculations. We conclude with a perspective of promising research directions and recommend that these advanced quantum dynamics simulations be more widely used by the environmental research community to directly probe PFAS degradation dynamics and other environmental processes.

Dietary exposure to per- and polyfluoroalkyl substances: Potential health impacts on human liver

Per- and polyfluoroalkyl substances (PFAS), dubbed "forever chemicals", are widely present in the environment. Environmental contamination and food contact substances are the main sources of PFAS in food, increasing the risk of human dietary exposure. Numerous epidemiological studies have established the link between dietary exposure to PFAS and liver disease. Correspondingly, PFAS induced-hepatotoxicity (e.g., hepatomegaly, cell viability, inflammation, oxidative stress, bile acid metabolism dysregulation and glycolipid metabolism disorder) observed from in vitro models and in vivo rodent studies have been extensively reported. In this review, the pertinent literature of the last 5 years from the Web of Science database was researched. This study summarized the source and fate of PFAS, and reviewed the occurrence of PFAS in food system (natural and processed food). Subsequently, the characteristics of human dietary exposure PFAS (population characteristics, distribution trend, absorption and distribution) were mentioned. Additionally, epidemiologic evidence linking PFAS exposure and liver disease was alluded, and the PFAS-induced hepatotoxicity observed from in vitro models and in vivo rodent studies was comprehensively reviewed. Lastly, we highlighted several critical knowledge gaps and proposed future research directions. This review aims to raise public awareness about food PFAS contamination and its potential risks to human liver health.

Per- and polyfluoroalkyl substances (PFAS) in grocery store foods: method optimization, occurrence, and exposure assessment

Dietary exposure to per- and polyfluoroalkyl substances (PFAS) is poorly understood. Evaluating PFAS in food is complicated by the need to evaluate varied matrices and a lack of a standard, matrix-specific sample extraction methods. Prior food studies implemented universal rather than matrix-specific extraction approaches, which may yield false negatives and an underestimation of PFAS dietary exposure if methods are not suitable to all matrices. Here the objectives were to screen and optimize PFAS extraction methods for plants, tissues, and dairy; apply optimized extraction methods to a grocery store food survey; and compare estimated exposure to published reference doses (RfDs). Optimized, matrix-specific extractions generally yielded internal standard recoveries of 50-150% and matrix spike recoveries of 70-130%. The frequency of PFAS detection in grocery store foods (16 of 22 products) was higher than in previous work. PFAS were detected at concentrations of 10 ng kgdw-1 (perfluorobutane sulfonate; washed green beans and perfluorohexanoic acid; unwashed tomato) to 2680 ng kgdw-1 (perfluorohexane sulfonate; radish). Concentrations of perfluorooctanoic acid (PFOA) in carrots, lettuce, radish, and canned green beans yielded median exposure intake (EI) values of 0.016-0.240 ng per kgbw-day, which exceeded the EPA RfD (0.0015 ng per kgbw-day). Washing reduced radish PFOA concentrations below detection, but EIs at the reporting limit still exceeded the RfD. The combination of improved data quality and greater frequency of PFAS detection vs. prior studies plus EI > RfD for some PFAS suggests a need for matrix-specific extractions and analysis of PFAS in additional grocery store foods from broader geographic regions.

Comprehensive Assessment of Exposure Pathways for Perfluoroalkyl Ether Carboxylic Acids (PFECAs) in Residents Near a Fluorochemical Industrial Park: The Unanticipated Role of Cereal Consumption

With the replacement of perfluorooctanoic acid (PFOA) with perfluorinated ether carboxylic acids (PFECAs), residents living near fluorochemical industrial parks (FIPs) are exposed to various novel PFECAs. Despite expectations of low accumulation, short-chain PFECAs, such as perfluoro-2-methoxyacetic acid (PFMOAA), previously displayed a considerably high body burden, although the main exposure routes and health risks remain uncertain. Here, we explored the distribution of perfluoroalkyl and polyfluoroalkyl substances (PFASs) in diverse environmental media surrounding a FIP in Shandong Province, China. PFECAs were found at elevated concentrations in all tested matrices, including vegetables, cereals, air, and dust. Among residents, 99.3% of the ∑36PFAS exposure, with a 43.9% contribution from PFECAs, was due to gastrointestinal uptake. Dermal and respiratory exposures were negligible at 0.1 and 0.6%, respectively. The estimated daily intake (EDI) of PFMOAA reached 114.0 ng/kg body weight (bw)/day, ranking first among all detected PFECAs. Cereals emerged as the dominant contributor to PFMOAA body burden, representing over 80% of the overall EDI. The median EDI of hexafluoropropylene oxide dimer acid (HFPO-DA) was 17.9 ng/kg bw/day, markedly higher than the USEPA reference doses (3.0 ng/kg bw/day). The absence of established threshold values for other PFECAs constrains a comprehensive risk assessment.

Linking drivers of plant per- and polyfluoroalkyl substance (PFAS) uptake to agricultural land management decisions

Widespread contamination of the per- and polyfluoroalkyl substance (PFAS) in agricultural areas is largely attributed to the application of sewage sludge in which the PFAS can be concentrated. This creates a pathway for these contaminants to enter the food chain and, by extension, causes human health and economic concerns. One barrier to managing land with PFAS contamination is the variation in reported plant uptake levels across studies. A review of the literature suggests that the variation in plant uptake is influenced by a host of factors including the composition of PFAS chemicals, soil conditions, and plant physiology. Factors include (1) the chemical components of the PFAS such as the end group and chain length; (2) drivers of soil sorption such as the presence of soil organic matter (SOM), multivalent cation concentration, pH, soil type, and micropore volume; and (3) crop physiological features such as fine root area, percentage of mature roots, and leaf blade area. The wide range of driving factors highlights a need for research to elucidate these mechanisms through additional experiments as well as collect more data to support refined models capable of predicting PFAS uptake in a range of cropping systems. A conceptual framework presented here links drivers of plant PFAS uptake found in the literature to phytomanagement approaches such as modified agriculture or phytoremediation to provide decision support to land managers.

Environmental Fate of Cl-PFPECAs: Accumulation of Novel and Legacy Perfluoroalkyl Compounds in Real-World Vegetation and Subsoils

Per- and polyfluoroalkyl substances (PFAS) are globally distributed and potentially toxic compounds. We report accumulation of chloroperfluoropolyethercarboxylates (Cl-PFPECAs) and perfluorocarboxylates (PFCAs) in vegetation and subsoils in New Jersey. Lower molecular weight Cl-PFPECAs, containing 7-10 fluorinated carbons, and PFCAs containing 3-6 fluorinated carbons were enriched in vegetation relative to surface soils. Subsoils were dominated by lower molecular weight Cl-PFPECAs, a divergence from surface soils. Contrastingly, PFCA homologue profiles in subsoils were similar to surface soils, likely reflecting temporal-use patterns. Accumulation factors (AFs) for vegetation and subsoils decreased with increasing CF2, 6-13 for vegetation and 8-13 in subsoils. In vegetation, for PFCAs having CF2 = 3-6, AFs diminished with increasing CF2 as a more sensitive function than for longer chains. Considering that PFAS manufacturing has transitioned from long-chain chemistry to short-chain, this elevated vegetative accumulation of short-chain PFAS suggests the potential for unanticipated PFAS exposure levels globally in human and/or wildlife populations. This inverse relationship between AFs and CF2-count in terrestrial vegetation is opposite the positive relationship reported in aquatic vegetation suggesting aquatic food webs may be preferentially enriched in long-chain PFAS. AFs normalized to soil-water concentrations increased with chain length for CF2 = 6-13 in vegetation but remained inversely related to chain length for CF2 = 3-6, reflecting a fundamental change in vegetation affinity for short chains compared to long.

Legacy and novel perfluoroalkyl substances in raw and cooked squids: Perspective from health risks and nutrient benefits

Perfluoroalkyl substance (PFAS) existed ubiquitously in the environment and could be ingested unconsciously with food which posed a disease risk to human health. Swordtip squid (Uroteuthis edulis) is one of the most popular and highly consumed seafood worldwide, with wide distribution and abundant biomass. Therefore, it is of great importance to the health of the public by reducing the health risks of squid consumption while preserving the benefits of squid to humans. In this study, the PFAS and fatty acids in squids were tested from the southeast coastal regions of China, a major habitat for squids. Relative higher concentrations of PFAS in squid were found in the subtropical zone of southern China (mean: 15.90 ng/g·dw) compared to those of the temperate zone of northern China (mean: 11.77 ng/g·dw). The digestive system had high tissue/muscle ratio (TMR) values, and the pattern of TMR among the same carbon-chain PFAS was similar. Cooking methods have a significant contribution to eliminating PFAS (in squids). PFAS were transferred from squids to other mediums after cooking, so juice and oil should be poured out to minimize PFAS exposure into body. The result showed that squids can be regarded as a healthy food by health benefits associated with fatty acids. Estimated daily intake (EDI) had the highest level in Korea via consuming squids through cooking processes compared with other countries. Based on the assessment of the hazard ratios (HRs), there was a high exposure risk of perfluoropentanoic acid (PFPeA) via taking squids for human health. This research provided the theoretical guidance of aquatic product processing in improving nutrition and reducing harmful substances.

Research Updates on the Mechanism and Influencing Factors of the Photocatalytic Degradation of Perfluorooctanoic Acid (PFOA) in Water Environments

Perfluorooctanoic acid is ubiquitous in water bodies and is detrimental to the health of organisms. Effectively removing perfluorooctanoic acid (PFOA), a persistent organic pollutant, has been a hot topic around the world. With traditional physical, chemical, and biological methods, it is difficult to effectively and completely remove PFOA, the costs are high, and it is easy to cause secondary pollution. There are difficulties in applying some technologies. Therefore, more efficient and green degradation technologies have been sought. Photochemical degradation has been shown to be a low-cost, efficient, and sustainable technique for PFOA removal from water. Photocatalytic degradation technology offers great potential and prospects for the efficient degradation of PFOA. Most studies on PFOA have been conducted under ideal laboratory conditions at concentrations that are higher than those detected in real wastewater. This paper summarizes the research status of the photo-oxidative degradation of PFOA, and it summarizes the mechanism and kinetics of PFOA degradation in different systems, as well as the influence of key factors on the photo-oxidative degradation and defluoridation process, such as system pH, photocatalyst concentration, etc. PFOA photodegradation technology's existing problems and future work directions are also presented. This review provides a useful reference for future research on PFOA pollution control technology.

A review on simultaneous heavy metal removal and organo-contaminants degradation by potential microbes: Current findings and future outlook

Industrial processes result in the production of heavy metals, dyes, pesticides, polyaromatic hydrocarbons (PAHs), pharmaceuticals, micropollutants, and PFAS (per- and polyfluorinated substances). Heavy metals are currently a significant problem in drinking water and other natural water bodies, including soil, which has an adverse impact on the environment as a whole. The heavy metal is highly poisonous, carcinogenic, mutagenic, and teratogenic to humans as well as other animals. Multiple polluted sites, including terrestrial and aquatic ecosystems, have been observed to co-occur with heavy metals and organo-pollutants. Pesticides and heavy metals can be degraded and removed concurrently from various metals and pesticide-contaminated matrixes due to microbial processes that include a variety of bacteria, both aerobic and anaerobic, as well as fungi. Numerous studies have examined the removal of heavy metals and organic-pollutants from different types of systems, but none of them have addressed the removal of these co-occurring heavy metals and organic pollutants and the use of microbes to do so. Therefore, the main focus of this review is on the recent developments in the concurrent microbial degradation of organo-pollutants and heavy metal removal. The limitations related to the simultaneous removal and degradation of heavy metals and organo-pollutant pollutants have also been taken into account.

Degradation of Perfluorooctanoic Acid on Aluminum Oxide Surfaces: New Mechanisms from Ab Initio Molecular Dynamics Simulations

Perfluorooctanoic acid (PFOA) is a part of a large group of anthropogenic, persistent, and bioaccumulative contaminants known as per- and polyfluoroalkyl substances (PFAS) that can be harmful to human health. In this work, we present the first ab initio molecular dynamics (AIMD) study of temperature-dependent degradation dynamics of PFOA on (100) and (110) surfaces of γ-Al₂O₃. Our results show that PFOA degradation does not occur on the pristine (100) surface, even when carried out at high temperatures. However, introducing an oxygen vacancy on the (100) surface facilitates an ultrafast (<100 fs) defluorination of C-F bonds in PFOA. We also examined degradation dynamics on the (110) surface and found that PFOA interacts strongly with Al(III) centers on the surface of γ-Al₂O₃, resulting in a stepwise breaking of C-F, C-C, and C-COO bonds. Most importantly, at the end of the degradation process, strong Al-F bonds are formed on the mineralized γ-Al₂O₃ surface, which prevents further dissociation of fluorine into the surrounding environment. Taken together, our AIMD simulations provide critical reaction mechanisms at a quantum level of detail and highlight the importance of temperature effects, defects, and surface facets for PFOA degradation on reactive surfaces, which have not been systematically explored or analyzed.

Poly- and Perfluoroalkyl Substances Induce Immunotoxicity via the TLR Pathway in Zebrafish: Links to Carbon Chain Length

Previous studies have reported the immunotoxicity of per- and polyfluoroalkyl substances (PFASs), but it remains a significant challenge to assess over 10,000 distinct PFASs registered in the distributed structure-searchable toxicity (DSSTox) database. We aim to reveal the mechanisms of immunotoxicity of different PFASs and hypothesize that PFAS immunotoxicity is dependent on the carbon chain length. Perfluorobutanesulfonic acid (PFBA), perfluorooctanoic acid (PFOA), and perfluorononanoic acid (PFNA) representing different carbon chain lengths (4-9) at environmentally relevant levels strongly reduced the host's antibacterial ability during the zebrafish's early-life stage. Innate and adaptive immunities were both suppressed after PFAS exposures, exhibiting a significant induction of macrophages and neutrophils and expression of immune-related genes and indicators. Interestingly, the PFAS-induced immunotoxic responses were positively correlated to the carbon chain length. Moreover, PFASs activated downstream genes of the toll-like receptor (TLR), uncovering a seminal role of TLR in PFAS immunomodulatory effects. Myeloid differentiation factor 88 (MyD88) morpholino knock-down experiments and MyD88 inhibitors alleviated the immunotoxicity of PFASs. Overall, the comparative results demonstrate differences in the immunotoxic responses of PFASs due to carbon chain length in zebrafish, providing new insights into the prediction and classification of PFASs mode of toxic action based on carbon chain length.

Integration of target, suspect, and nontarget screening with risk modeling for per- and polyfluoroalkyl substances prioritization in surface waters

Though thousands of per- and polyfluoroalkyl substances (PFAS) have been on the global market, most research focused on only a small fraction, potentially resulting in underestimated environmental risks. Here, we used complementary target, suspect, and nontarget screening for quantifying and identifying the target and nontarget PFAS, respectively, and developed a risk model considering their specific properties to prioritize the PFAS in surface waters. Thirty-three PFAS were identified in surface water in the Chaobai river, Beijing. The suspect and nontarget screening by Orbitrap displayed a sensitivity of > 77%, indicating its good performance in identifying the PFAS in samples. We used triple quadrupole (QqQ) under multiple-reaction monitoring for quantifying PFAS with authentic standards due to its potentially high sensitivity. To quantify the nontarget PFAS without authentic standards, we trained a random forest regression model which presented the differences up to only 2.7 times between measured and predicted response factors (RFs). The maximum/minimum RF in each PFAS class was as high as 1.2-10.0 in Orbitrap and 1.7-22.3 in QqQ. A risk-based prioritization approach was developed to rank the identified PFAS, and four PFAS (i.e., perfluorooctanoic acid, hydrogenated perfluorohexanoic acid, bistriflimide, 6:2 fluorotelomer carboxylic acid) were flagged with high priority (risk index > 0.1) for remediation and management. Our study highlighted the importance of a quantification strategy during environmental scrutiny of PFAS, especially for nontarget PFAS without standards.

Estimating industrial process emission and assessing carbon dioxide equivalent of perfluorooctanoic acid (PFOA) and its salts in China

Air pollution and climate change are closely linked because many greenhouse gases (GHGs) and air pollutants come from the same source. Perfluorinated compounds (PFCs) are new pollutants that have received high attention in recent years, as they are not only harmful to human health, but also important contributors to climate change. Therefore, PFCs are the key gases for the coordinated governance of air pollution and climate change. With the geographical shift of fluoropolymer production, the main emitters of perfluorooctanoic acid and its salts (PFOA/PFO) moved from North America, Europe and Japan to emerging Asian economies, especially China. In this study, industrial sources of PFOA/PFO in the Chinese atmosphere were identified, and its atmospheric emissions, carbon dioxide equivalent (CO₂e) emissions and environmental risks were assessed. China released about 38.19 tons PFOA/PFO into the atmosphere through industrial activities in 2019, 97 % of which originated from the production of fluoropolymers. PFOA/PFO showed aggregative emission along the eastern coastal zone, especially in the Yangtze River Delta. Cumulative PFOA/PFO emission from all provinces equaled to 0.28-0.47 million tons CO₂e, of which Jiangsu and Zhejiang took the lead, while Shanghai's CO₂-equivalent emissions intensity of PFOA/PFO in terms of area, population, gross domestic product (GDP), and industrial added value took the first in China. The available monitoring data on atmospheric concentration of PFOA in urban and rural China implied that its distribution pattern was similar to PFOA/PFO emissions, that is, the concentrations in the eastern regions with the highest degree of industrialization were significantly higher than that in the central and western regions, and the PFOA concentrations in urban China were higher than that in the rural, which proved that industrial use was an important source of PFOA pollution and would cause significant risks to the environment.

Per- and polyfluoroalkyl substances (PFAS) exposure through munitions in the Russia-Ukraine conflict

Considered contaminants of emerging concern, per- and polyfluoroalkyl substances (PFAS) are a class of toxic, manufactured chemicals found in commercial and consumer products such as nonstick cookware, food packaging, and firefighting foams. Human exposure to PFAS through inhalation and ingestion can cause a variety of harmful effects and negative health outcomes. Per- and polyfluoroalkyl substances possess high polarity and chemical stability, enabling them to resist degradation in most environmental conditions. These characteristics allow PFAS to be mobile in soil, air, and water, and bioaccumulate in living organisms. Due to their thermally resistant chemical properties, PFAS are used as binders in polymer-bonded explosives (PBX) and in various components of munitions. Thus, when munitions are detonated, PFAS are released into the environment as aerosols and can deposit in the soil, surface water, or biota. Air emission modeling suggests that ground-level and airborne detonation of munitions can increase PFAS deposition both locally and long range. Further, if industrial facilities with PFAS are damaged or destroyed, there is greater potential for environmental degradation from increased release of PFAS into the environment. As a consequence of their persistent nature, PFAS can remain in an environment long after armed conflict, indirectly affecting ecosystems, food sources, and human health. The toxic contamination from munitions could present a greater hazard to a larger population over time than acute detonation events. This article discusses methods for estimating war-related damage from PFAS by exploring predictive modeling approaches and postwar ground validation techniques. Integr Environ Assess Manag 2023;19:376-381. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Effect of lifestyle-based lipid lowering interventions on the relationship between circulating levels of per-and polyfluoroalkyl substances and serum cholesterol

Exposure to certain per-and polyfluoroalkyl substances (PFAS) has been shown to be positively associated with total and/or low-density lipoprotein cholesterol. Examining this association in lipid lowering interventions may provide additional evidence linking PFAS to cardiovascular risk. We examined the relationship of 6 PFAS with cholesterol in a 6-month lifestyle-based intervention. We quantitated PFAS in 350 individuals at baseline and post intervention and examined associations of PFAS with cholesterol before and after intervention. Food frequency questionnaires and GIS analyses were used to investigate PFAS hotspots and possible exposure routes. Cholesterol significantly decreased following intervention and in parallel, PFOS, PFOA, PFHxS, and PFHpA significantly decreased. PFOS was positively correlated with total cholesterol only post-intervention. We observed that PFOS was distributed among both non-albumin and albumin lipoprotein fractions pre-intervention, but entirely in albumin fraction post-intervention. Our results indicate that lipid-lowering via lifestyle modification may impact on circulating levels or distribution of PFAS.

Poly- and perfluoroalkyl substances exposure during pregnancy and postpartum depression: Evidence from the Shanghai birth cohort

BACKGROUND

Exposure to poly-and perfluoroalkyl substances (PFASs) has been linked to psychiatric disorders in the general population. Because women in the postpartum period are susceptible to mental disorders, we aimed to investigate the association between exposure to PFASs during pregnancy and postpartum depression (PPD).

METHODS

Our study consisted of 2741 pregnant women who were enrolled in the Shanghai Birth Cohort during the early pregnancy and gave birth to a singleton live birth between 2013 and 2016. A total of 10 PFASs were measured in maternal plasma collected in early gestation by high-performance liquid chromatography/tandem mass spectrometry. PPD was assessed using the Edinburgh Postnatal Depression Scale (EPDS) at 42 days after the child birth. We used multivariable logistic regression to estimate the association between exposure to PFASs and PPD, adjusted for potential confounders. Negative binomial regression was used to assess the association between PFASs exposure during pregnancy and EPDS subscales including anhedonia, anxiety, and depression. A quantile-based g-computation approach was used to evaluate the joint and independent effects of PFASs on PPD.

RESULTS

Around 11.7% of the mothers had probable PPD (EPDS cut-off ≥10). Overall, exposure to PFASs in early pregnancy was not associated with PPD or EPDS subscales. Quantile g-computation method also showed that increasing PFASs mixture by one quartile was not associated with PPD (odds ratio, 1.08; 95% confidence interval: 0.91, 1.29).

CONCLUSION

Our findings indicate that exposure to PFASs during pregnancy was not associated with PPD at 6 weeks postpartum.

PFASs in Soil: How They Threaten Human Health through Multiple Pathways and Whether They Are Receiving Adequate Concern

Per- and polyfluoroalkyl substances (PFASs) have been mass-produced and widely applied in consumer and industrial products, resulting in their widespread presence in the environment. Features such as environmental persistence, bioaccumulation, and high toxicity even at low doses have made PFASs an increasing concern. This brief review focuses on soil PFASs, especially the effect of soil PFASs on other environmental media and their potential threats to human health through daily diet. Specifically, soil PFASs contamination caused by different pathways was first investigated. Soil pollution from application of aqueous film-forming foams (AFFFs) is generally more severe than that from fluorochemical manufacturing plants, followed by biosolid land use, landfill, and irrigation. Factors, such as carbon chain length of PFASs, wastewater treatment technology, geographical conditions, and regional development level, are related to soil PFASs' pollution. Then, the migration, bioaccumulation, and toxicity characteristics of soil PFASs were analyzed. Short-chain PFASs have higher solubility, mobility, and bioavailability, while long-chain PFASs have higher bioaccumulation potential and are more toxic to organisms. Factors such as soil texture, solution chemistry conditions, enzymes, and fertilization conditions also influence the environmental behavior of PFASs. The risk of human exposure to PFASs through agricultural and animal products is difficult to control and varies depending on living region, age, eating habits, lifestyle, ethnicity, etc. Soil PFASs threaten drinking water safety, affect soil function, and enter food webs, threatening human health. Knowledge gaps and perspectives in these research fields are also included in current work to assist future research to effectively investigate and understand the environmental risks of soil PFASs, thereby reducing human exposure.

Critical review on phytoremediation of polyfluoroalkyl substances from environmental matrices: Need for global concern

Poly- and perfluoroalkyl substances (PFAS) are a class of emerging organic contaminants that are impervious to standard physicochemical treatments. The widespread use of PFAS poses serious environmental issues. PFAS pollution of soils and water has become a significant issue due to the harmful effects of these chemicals both on the environment and public health. Owing to their complex chemical structures and interaction with soil and water, PFAS are difficult to remove from the environment. Traditional soil remediation procedures have not been successful in reducing or removing them from the environment. Therefore, this review focuses on new phytoremediation techniques for PFAS contamination of soils and water. The bioaccumulation and dispersion of PFAS inside plant compartments has shown great potential for phytoremediation, which is a promising and unique technology that is realistic, cost-effective, and may be employed as a wide scale in situ remediation strategy.

Impacts of Environmental and Engineered Processes on the PFAS Fingerprint of Fluorotelomer-Based AFFF

Forensic analysis can potentially be used to determine per- and polyfluoroalkyl substance (PFAS) sources at contaminated sites. However, fluorotelomer aqueous film-forming foam (AFFF) sources are difficult to identify because the polyfluorinated active ingredients do not have authentic standards and because the parent compounds can undergo transformation and differential transport, resulting in alteration of the PFAS distribution or fingerprint. In this study, we investigate changes in the PFAS fingerprint of fluorotelomer-derived AFFF due to environmental and engineered processes, including groundwater transport, surface water flow, and land application of contaminated biosolids. Fingerprint analysis supplemented by quantification of precursors and identification of suspected active ingredients shows a clear correlation between a fluorotelomer AFFF manufacturer and surface water of nearby Lake Michigan, demonstrating contamination (>100 ng/L PFOA) of the lake due to migration of an AFFF-impacted groundwater plume. In contrast, extensive processing during wastewater treatment and environmental transport results in large changes to the AFFF fingerprint near agricultural fields where contaminated biosolids were spread. At biosolids-impacted sites, the presence of active ingredients confirms contamination by fluorotelomer AFFF. While sediments can retain longer-chain PFAS, this study demonstrates that aqueous samples are most relevant for PFAS fingerprinting in complex sites, particularly where shorter-chain compounds have been used.

Per- and polyfluoroalkyl substances (PFASs) in groundwater from a contaminated site in the North China Plain: Occurrence, source apportionment, and health risk assessment

Per-and polyfluoroalkyl substances (PFASs) are manmade chemicals that have wide industrial and commercial application. However, little research has been carried out on PFASs pollution in groundwater from a previously contaminated site. Here, we investigated 43 PFASs in a monitoring campaign from two different aquifers in the North China Plain. Our results revealed that total PFASs concentrations (∑₄₃PFASs) ranged from 0.22 to 3,776.76 ng/L, with no spatial or compositional differences. Moreover, perfluorooctanoic acid (PFOA) and perfluoroheptane sulfonate (PFHpS) were the dominant pollutants with mean concentrations of 177.33 ng/L and 51 ng/L, respectively. ∑₄₃PFAS decreased with well depth due to the adsorption of PFASs to the aquifer materials. Water temperature, total organic carbon, dissolved oxygen, and total phosphorus concentrations were correlated to the PFAS concentrations. Principal component analysis indicated that the main sources of PFASs in groundwater were untreated industrial discharge, untreated domestic wastewater, food packaging, aqueous film forming foams and metal plating, and surface runoff, which overlapped with the industries that previously existed in a nearby city. Human health risks from drinking contaminated groundwater were low to the local residents, with children aged 1-2 years being the most sensitive group. One specific site with a high PFOA concentration was of concern, as it was several orders higher than the 70 ng/L recommended by US Environmental Protection Agency health advisory. This study provided baseline data for PFASs in a previously-contaminated site, which will help in the development of effective strategies for controlling PFASs pollution in the North China Plain.

Electrochemical oxidation combined with UV irradiation for synergistic removal of perfluorooctane sulfonate (PFOS) in water

The effect of electrochemical degradation on Magnéli phase Ti₄O₇ anode combined with UV irradiation on the removal of PFOS was systematically evaluated in the present study. A synergistic effect of electrolysis and UV irradiation rather than a simple additive effect for PFOS degradation was demonstrated experimentally and theoretically. The short wavelength irradiation within 400 nm is the main contribution to enhance the electrochemical degradation of PFOS, while the initial pH of the solution has little effect on the PFOS degradation. The increase of current density accelerates the removal of PFOS either by electrolysis treatment or the joint process. The time-dependent density functional theory (TD-DFT) calculation indicates that the synergistic effect of the electrolysis and UV irradiation is most likely due to the involvement of the excited PFOS induced under UV irradiation in the electrochemical reaction. This study provides the first mechanistic explanation for the electrochemical degradation of PFOS enhanced by UV irradiation.

The occurrence, distribution, and risks of PFAS at AFFF-impacted sites in Finland

Per- and polyfluoroalkyl substances (PFAS) comprise a wide group of persistent chemicals, whose ubiquitous occurrence in the environment, particularly due to their extensive use for fire suppression in aqueous film forming foams (AFFFs), has raised global attention. We evaluated the impacts of PFAS at three firefighting training sites and one industrial site in Finland, to highlight key elements to be considered in the retrospective risk assessment of these chemicals. The site assessments covered the occurrence and distribution of 23 PFAS in multiple environmental matrices, i.e., soil, sediment, surface water, groundwater, and biota, and the subsequent risks to human health and the environment owing to the migration of and exposure to the selected compounds. Our study showed that the extensive use of nowadays restricted or substituted PFAS, particularly PFOS, are still often the predominant compounds detected at AFFF-impacted sites and will continue to cause long-term risks to the environment. The most significant environmental or health risks at these sites are likely to concern aquatic ecosystems, fish consumption or groundwater usage due to the off-site migration of PFAS. Here, even a single fire extinguishing event can be a considerable contributor. We also illustrate that conventional procedures based on simple mass-balance, and exposure models, with a focus on PFOS and other site-specifically relevant PFAS may provide sufficient means to assess the risks. Moreover, we address that despite the exceedance of the very stringent regulatory threshold values issued recently for PFAS, the actual site-specific risks to human health and the environment may remain reasonably low.

Non-target and suspect-screening analyses of hydroponic soybeans and passive samplers exposed to different watershed irrigation sources

Water scarcity increases the likelihood of irrigating food crops with municipal wastewater that may pose potential dietary risks of regulated and non-regulated organic chemical uptake to edible plant tissues. Only a few studies have used high resolution mass spectrometry (HRMS) to assess the uptake of chemicals of concern into food crops. This study used non-target and suspect-screening analyses to compare total chemical features, tentatively identified chemicals (TICs), and EPA ToxCast chemicals in soybean plants and passive samplers exposed to five different irrigation sources that were collected from an agricultural watershed during mild drought conditions. Secondary-treated municipal wastewater effluent, two surface waters, two ground waters, and deionized municipal tap water were used for two hydroponic experiments: soybean roots and shoots and Composite Integrative Passive Samplers (CIPS) harvested after fourteen days of exposure and soybeans after fifty-six days. CIPS were sealed in separate glass amber jars to evaluate their efficacy to mimic chemical features, TICs, and ToxCast chemical uptake in plant roots, shoots, and beans. Total soybean biomass and water use were greatest for tap water, municipal wastewater, and surface water downstream of the municipal wastewater facility relative to groundwater samples and surface water collected upstream of the wastewater facility. ToxCast chemicals were ubiquitous across watershed irrigation sources in abundance, chemical use category, and number. Wastewater-exposed soybeans had the fewest extractable TICs in plant tissues of all irrigation sources. More ToxCast chemicals were identified in CIPS than extracted from irrigation sources by solid phase extraction. ToxCast chemicals in beans and CIPS were similar in number, chemical use category, and log Kow range. CIPS appear to serve as a useful surrogate for ToxCast chemical uptake in beans, the edible food product.

The Phytomanagement of PFAS-Contaminated Land

Globally, several hundred thousand hectares of both agricultural and urban land have become contaminated with per- and polyfluoroalkyl substances (PFAS). PFAS compounds are resistant to degradation and are mobile in soil compared to other common contaminants. Many compounds have KD values (matrix/solution concentration quotients) of <10. PFAS compounds endanger the health of humans and ecosystems by leaching into groundwater, exposure via dust, and, to a lesser extent, through plant uptake. This review aims to determine the feasibility of phytomanagement, the use of plants, and the use of soil conditioners to minimize environmental risk whilst also providing an economic return in the management of PFAS-contaminated land. For most sites, PFAS combinations render phytoextraction, the use of plants to remove PFAS from soil, inviable. In contrast, low Bioaccumulation Coefficients (BAC; plant and soil concentration quotients) timber species or native vegetation may be usefully employed for phytomanagement to limit human/food chain exposure to PFAS. Even with a low BAC, PFAS uptake by crop plants may still exceed food safety standards, and therefore, edible crop plants should be avoided. Despite this limitation, phytomanagement may be the only economically viable option to manage most of this land. Plant species and soil amendments should be chosen with the goal of reducing water flux through the soil, as well as increasing the hydrophobic components in soil that may bind the C-F-dominated tails of PFAS compounds. Soil conditioners such as biochar, with significant hydrophobic components, may mitigate the leaching of PFAS into receiving waters. Future work should focus on the interactions of PFAS with soil microbiota; secondary metabolites such as glomalin may immobilize PFAS in soil.

Target and Nontarget Screening of PFAS in Biosolids, Composts, and Other Organic Waste Products for Land Application in France

Zwitterionic, cationic, and anionic per- and polyfluoroalkyl substances (PFAS) are increasingly reported in terrestrial and aquatic environments, but their inputs to agricultural lands are not fully understood. Here, we characterized PFAS in 47 organic waste products (OWP) applied in agricultural fields of France, including historical and recent materials. Overall, 160 PFAS from 42 classes were detected from target screening and homologue-based nontarget screening. Target PFAS were low in agriculture-derived wastes such as pig slurry, poultry manure, or dairy cattle manure (median ∑₄₆PFAS: 0.66 μg/kg dry matter). Higher PFAS levels were reported in urban and industrial wastes, paper mill sludge, sewage sludge, or residual household waste composts (median ∑₄₆PFAS: 220 μg/kg). Historical municipal biosolids and composts (1976-1998) were dominated by perfluorooctanesulfonate (PFOS), N-ethyl perfluorooctanesulfonamido acetic acid (EtFOSAA), and cationic and zwitterionic electrochemical fluorination precursors to PFOS. Contemporaneous urban OWP (2009-2017) were rather dominated by zwitterionic fluorotelomers, which represented on average 55% of ∑₁₆₀PFAS (max: 97%). The fluorotelomer sulfonamidopropyl betaines (X:2 FTSA-PrB, median: 110 μg/kg, max: 1300 μg/kg) were the emerging class with the highest occurrence and prevalence in contemporary urban OWP. They were also detected as early as 1985. The study informs for the first time that urban sludges and composts can be a significant repository of zwitterionic and cationic PFAS.

Critical Review of Thermal Decomposition of Per- and Polyfluoroalkyl Substances: Mechanisms and Implications for Thermal Treatment Processes

Per- and polyfluoroalkyl substances (PFASs) are fluorinated organic chemicals that are concerning due to their environmental persistence and adverse human and ecological effects. Remediation of environmental PFAS contamination and their presence in consumer products have led to the production of solid and liquid waste streams containing high concentrations of PFASs, which require efficient and cost-effective treatment solutions. PFASs are challenging to defluorinate by conventional and advanced destructive treatment processes, and physical separation processes produce waste streams (e.g., membrane concentrate, spent activated carbon) requiring further post-treatment. Incineration and other thermal treatment processes are widely available, but their use in managing PFAS-containing wastes remains poorly understood. Under specific operating conditions, thermal treatment is expected to mineralize PFASs, but the degradation mechanisms and pathways are unknown. In this review, we critically evaluate the thermal decomposition mechanisms, pathways, and byproducts of PFASs that are crucial to the design and operation of thermal treatment processes. We highlight the analytical capabilities and challenges and identify research gaps which limit the current understanding of safely applying thermal treatment to destroy PFASs as a viable end-of-life treatment process.

Extraction and Matrix Cleanup Method for Analyzing Novel Per- and Polyfluoroalkyl Ether Acids and Other Per- and Polyfluoroalkyl Substances in Fruits and Vegetables

Per- and polyfluoroalkyl ether acids (PFEAs) are a subclass of per- and polyfluoroalkyl substances (PFAS) that are detected with increasing frequency in environmental matrices. Diet can be an important route of PFEA exposure, but the presence of PFEAs in food is poorly understood. Extraction methods for food samples exist for traditionally studied PFAS, but their suitability for PFEAs and other novel PFAS remains unknown. In this study, an extraction and matrix cleanup method was developed to quantify 45 PFAS, including 13 PFEAs, 3 perfluoroalkane sulfonamides, and 6 fluorotelomer carboxylic acids in 10 types of fruits and vegetables. Homogenized samples were extracted with basic methanol, and resulting extracts were diluted with water and cleaned up using solid-phase extraction with weak anion-exchange cartridges. The method was validated by performing spike-recovery experiments at spike levels of 1 ng/g in all 10 matrices and 0.1 ng/g in 2 matrices. For PFAS without a corresponding isotopically labeled internal standard (IS), adopting an IS with a similar chromatographic retention time generated the most accurate recoveries. Dependent upon the matrix, recoveries of 38-44 PFAS (including 10-13 PFEAs) fell within 50-150% for samples spiked at 1 ng/g. Recoveries of 40 and 38 PFAS in blueberries and corn, respectively, fell within 50-150% for samples spiked at 0.1 ng/g. Method quantification limits (MQLs) of PFAS in pure solvents were determined as the lowest calibration level with an accuracy between 70 and 130%. To compensate for matrix effects, a matrix factor was applied on the basis of the analyte response in different matrices relative to the pure solvent. The MQLs of 45 PFAS (including 13 PFEAs) in 10 matrices ranged from 0.025 to 0.25 ng/g. Overall, this method is capable of sensitively quantifying 45 PFAS in many fruits and vegetables.

Rapid removal of PFOA and PFOS via modified industrial solid waste: Mechanisms and influences of water matrices

Emerging perfluoroalkyl and polyfluoroalkyl substances contaminate waters at trace concentrations, thus rapid and selective adsorbents are pivotal to mitigate the consequent energy-intensive and time-consuming issues in remediation. In this study, coal combustion residuals-fly ash was modified (FA-SCA) to overcome the universal trade-off between high adsorption capacity and fast kinetics. FA-SCA presented rapid adsorption (t_eq = 2 min) of PFOX (perfluorooctanoic acid and perfluorooctanesulfonic acid, collectively), where the dynamic adsorption capacity (q_dyn = q_m/t_eq) was 2-3 orders of magnitude higher than that of benchmark activated carbons and anion-exchange resins. Investigated by advanced characterization and kinetic models, the fast kinetics and superior q_dyn are attributed to (1) elevated external diffusion driven by the submicron particle size; (2) enhanced intraparticle diffusion caused by the developed mesoporous structure (V_meso/V_micro = 8.1); (3) numerous quaternary ammonium anion-exchange sites (840 μmol/g), and (4) appropriate adsorption affinity (0.031 L/μmol for PFOS, and 0.023 L/μmol for PFOA). Since the adsorption was proven to be a synergistic process of electrostatic and hydrophobic interactions, effective adsorption ([PFOX]_ini = 1.21 μM, concentration levels of highly-contaminant-sites) was obtained at conventional natural water chemistries. High selectivity (>85.4% removal) was also achieved with organic/inorganic competitors, especially compounds with partly similar molecular structures to PFOX. In addition, >90% PFOX was removed consistently during five cycles in mild regeneration conditions (pH 12 and 50 °C). Overall, FA-SCA showed no leaching issues of toxic metals and exhibits great potential in both single-adsorption processes and treatment train systems.

Montmorillonite clay-based sorbents decrease the bioavailability of per- and polyfluoroalkyl substances (PFAS) from soil and their translocation to plants

Consumption of food and water contaminated with per- and polyfluoroalkyl substances (PFAS) presents a significant risk for human exposure. There is limited data on high affinity sorbents that can be used to reduce the bioavailability of PFAS from soil and translocation to plants and garden produce. To address this need, montmorillonite clay was amended with the nutrients carnitine and choline to increase the hydrophobicity of the sorbent and the interlayer spacing. In this study, the binding of PFOA (perfluorooctanoic acid) and PFOS (perfluorooctanesulfonic acid) to parent and amended clays was characterized. Isothermal analyses were conducted at pH 7 and ambient temperature to simulate environmentally-relevant conditions. The data for all tested sorbents fit the Langmuir model indicating saturable binding sites with high capacities and affinities under neutral conditions. Amended montmorillonite clays had increased capacities for PFOA and PFOS (0.51-0.71 mol kg^-1) compared to the parent clay (0.37-0.49 mol kg^-1). Molecular dynamics (MD) simulations suggested that hydrophobic and electrostatic interactions at the terminal fluorinated carbon chains of PFAS compounds were major modes of surface interaction. The safety and efficacy of the clays were confirmed in a living organism (Lemna minor), where clays (at 0.1% inclusion) allowed for increased growth compared to PFOA and PFOS controls (p ≤ 0.01). Importantly, soil studies showed that 2% sorbent inclusion could significantly reduce PFAS bioavailability from soil (up to 74%). Studies in plants demonstrated that inclusion of 2% sorbent significantly reduced PFAS residues in cucumber plants (p ≤ 0.05). These results suggest that nutrient-amended clays could be included in soil to decrease PFAS bioavailability and translocation of PFAS to plants.

Wastewater fertigation in agriculture: Issues and opportunities for improved water management and circular economy

Water shortages are an issue of growing worldwide concern. Irrigated agriculture accounts for about 70% of total freshwater withdrawals globally, therefore alternatives to use of conventional sources need to be investigated. This paper critically reviews the application of treated wastewater for agricultural fertigation (i.e., water and nutrient recovery) considering different perspectives: legislation, agronomic characteristics, social acceptability, sustainability of treatment technologies. Critical issues that still need further investigation for a wider application of fertigation practices include accumulation of emerging contaminants in soils, microbiological and public health implications, and stakeholders' acceptance. A techno-economic methodological approach for assessing the sustainability of treated wastewater reuse in agriculture is subsequently proposed herein, which considers different possible local conditions (cultivated crops and effluent characteristics). The results showed that tailoring effluent characteristics to the desired nutrient composition could enhance the process economic sustainability; however, water savings have a major economic impact than fertilizers' savings, partly due to limited P reuse efficiency. The developed methodology is based on a practical approach and may be generalized to most agricultural conditions, to evaluate and encourage safe and efficient agricultural wastewater reuse practices.

Exposure routes, bioaccumulation and toxic effects of per- and polyfluoroalkyl substances (PFASs) on plants: A critical review

Per- and polyfluoroalkyl substances (PFASs) are artificial persistent organic pollutants ubiquitous in ecosystem, and their bioaccumulation and adverse outcomes in plants have attracted extensive concerns. Here, we review the toxic effects of PFASs encountered by various plants from physiological, biochemical and molecular perspectives. The exposure routes and bioaccumulation of PFASs in plants from contaminated sites are also summarized. The bioaccumulation of PFASs in plants from contaminated sites varied between ng/g and μg/g levels. The 50% inhibition concentration of PFASs for plant growth is often several orders of magnitude higher than the environmentally relevant concentrations (ERCs). ERCs of PFASs rarely lead to obvious phenotypic/physiological damages in plants, but markedly perturb some biological activities at biochemical and molecular scales. PFAS exposure induces the over-generated reactive oxygen species and further damages plant cell structure and organelle functions. A number of biochemical activities in plant cells are perturbed, such as photosynthesis, gene expression, protein synthesis, carbon and nitrogen metabolisms. To restore the desire states of cells exposed to PFASs, plants initiate several detoxifying mechanisms, including enzymatic antioxidants, non-enzymatic antioxidants, metallothionein genes and metabolic reprogramming. Future challenges and opportunities in PFAS phytotoxicity studies are also proposed in the review.

Direct Prediction of Bioaccumulation of Organic Contaminants in Plant Roots from Soils with Machine Learning Models Based on Molecular Structures

Root concentration factor (RCF) is an important characterization parameter to describe accumulation of organic contaminants in plants from soils in life cycle impact assessment (LCIA) and phytoremediation potential assessment. However, building robust predictive models remains challenging due to the complex interactions among chemical-soil-plant root systems. Here we developed end-to-end machine learning models to devolve the complex molecular structure relationship with RCF by training on a unified RCF data set with 341 data points covering 72 chemicals. We demonstrate the efficacy of the proposed gradient boosting regression tree (GBRT) model based on the extended connectivity fingerprints (ECFP) by predicting RCF values and achieved prediction performance with R-squared of 0.77 and mean absolute error (MAE) of 0.22 using 5-fold cross validation. In addition, our results reveal nonlinear relationships among properties of chemical, soil, and plant. Further in-depth analyses identify the key chemical topological substructures (e.g., -O, -Cl, aromatic rings and large conjugated π systems) related to RCF. Stemming from its simplicity and universality, the GBRT-ECFP model provides a valuable tool for LCIA and other environmental assessments to better characterize chemical risks to human health and ecosystems.

Per- and polyfluoroalkyl substances (PFAS), trace elements and life history parameters of mass-stranded common dolphins (Delphinus delphis) in New Zealand

Profiles of 33 PFAS analytes and 12 essential and non-essential trace elements were measured in livers of stranded common dolphins (Delphinus delphis) from New Zealand. PFAS concentrations reported were largely comparable to those measured in other marine mammal species globally and composed mostly of long-chain compounds including perfluorooctanesulfonic acid (PFOS), perfluorododecanoic acid (PFDoDA), perfluorotridecanoic acid (PFTrDA) and perfluorooctanesulfonamide (FOSA). PFAS profiles did not vary significantly by location, body condition, or life history. Notably, significant positive correlations were observed within respective PFAS and trace elements. However, only negative correlations were evident between these two contaminant types, suggesting different exposure and metabolic pathways. Age-associated concentrations were found for PFTrDA and four trace elements, i.e. silver, mercury, cadmium, selenium, indicating differences in the bioaccumulation biomagnification mechanisms. Overall, our results contribute to global understanding of accumulation of PFAS by offering first insights of PFAS exposure in cetaceans living within South Pacific Australasian waters.

Phytoremediation of poly- and perfluoroalkyl substances: A review on aquatic plants, influencing factors, and phytotoxicity

Poly- and perfluoroalkyl substances (PFASs) are a group of emerging organic contaminants which are persistent to normal physicochemical treatments. The widespread use of PFASs has caused significant environmental issues. The bioaccumulation and distribution of PFASs within plant compartments have revealed great potentials for phytoremediation. In this review, the roles of aquatic plants in the process of PFASs remediation were highlighted. Moreover, there were different underlying mechanisms of PFASs uptake between terrestrial and aquatic plants. On the other hand, a wide range of influencing factors for bioaccumulation and translocation of PFASs within plant compartments are also presented and discussed. In response to exposure of PFASs, corresponding phytotoxic effects has affected the growth and metabolism of plants, which could provide beneficial guides of the phytotoxic tolerance for plant species selection in applications of phytoremediation. Finally, the discussion about whether phytoremediation is a viable option for PFASs removal and further research priorities are suggested.

Uptake of perfluorinated alkyl acids by crops: results from a field study

Four crops with different edible plant parts (radish, lettuce, pea and maize) were grown in outdoor lysimeters on soil spiked with 13 perfluorinated alkyl acids (PFAAs) at 4 different levels. PFAA concentrations were measured in soil, soil pore water, and different plant parts at harvest. Edible part/soil concentration factors ranged over seven orders of magnitude and decreased strongly with increasing PFAA chain length, by a factor of 10 for each additional fluorinated carbon (nCF) for pea. Three processes were responsible for most of the variability. The first was sorption to soil; calculating whole plant concentration factors on the basis of concentration in pore water instead of soil reduced the variability from five orders of magnitude to two. Second, the journey of the PFAAs with the transpiration stream to the leaves was hindered by retention in the roots driven by sorption; root retention factors increased by a factor 1.7 for each nCF. Third, transfer of PFAAs from the leaves to the fruit via the phloem flow was also hindered - presumably by sorption; fruit/leaf concentration factors decreased by a factor 2.5 for each nCF. A simple mathematical model based on the above principles described the measured concentrations in roots, leaves, fruits and radish bulbs within a factor 4 in most cases. This indicates that the great diversity in PFAA transfer from soil to crops can be largely described with simple concepts for four markedly different species.