Characterization of a Mixture of CO2 Adsorption Products in Hyperbranched Aminosilica Adsorbents by (13)C Solid-State NMR

Unravelling the structure of CO2 in silica adsorbents: an NMR and computational perspective

This comprehensive review describes recent advancements in the use of solid-state NMR-assisted methods and computational modeling strategies to unravel gas adsorption mechanisms and CO2 speciation in porous CO2-adsorbent silica materials at the atomic scale. This work provides new perspectives for the innovative modifications of these materials rendering them more amenable to the use of advanced NMR methods.

Insights into the Unanticipated Chemical Reactivity of Functionalized Nanosheets Derived from TiB2

Titanium diboride (TiB2) is a member of the AlB2-type layered metal boride family; the materials of this family are receiving renewed research interest owing to their amenability to nanoscaling. Earlier, we showed that TiB2 can be nanoscaled to yield quasi 2D nanostructures following a dissolution-recrystallization approach. This approach yielded nanosheets that were chemically functionalized with oxy-functional groups. Also, these nanosheets could inherently form a gel-like substance. In this work, we show that these functionalized nanosheets can interact with ascorbic acid in a way that first imparts a characteristic orange hue to the original yellowish nanosheet dispersion. Second, this interaction results in the loss of gel-like behavior of the nanosheet dispersion. We utilize several spectroscopic techniques such as UV-visible, FT-IR, NMR, EPR, XPS, and XANES to unravel this unexplored chemical interaction. The findings show that both titania as well as oxy-boron species react with ascorbic acid, leading to a profound modification of the nanosheets. This modification results in an augmented electrochemical response, implying that the modified nanosheets can be used in novel applications. This study is therefore a step toward gaining an even deeper understanding of the chemical opportunities that these nanoscaled borides can provide.

Support Pore Structure and Composition Strongly Influence the Direct Air Capture of CO2 on Supported Amines

A variety of amine-impregnated porous solid sorbents for direct air capture (DAC) of CO2 have been developed, yet the effect of amine-solid support interactions on the CO2 adsorption behavior is still poorly understood. When tetraethylenepentamine (TEPA) is impregnated on two different supports, commercial γ-Al2O3 and MIL-101(Cr), they show different trends in CO2 sorption when the temperature (-20 to 25 °C) and humidity (0-70% RH) of the simulated air stream are varied. In situ IR spectroscopy is used to probe the mechanism of CO2 sorption on the two supported amine materials, with weak chemisorption (formation of carbamic acid) being the dominant pathway over MIL-101(Cr)-supported TEPA and strong chemisorption (formation of carbamate) occurring over γ-Al2O3-supported TEPA. Formation of both carbamic acid and carbamate species is enhanced over the supported TEPA materials under humid conditions, with the most significant enhancement observed at -20 °C. However, while equilibrium H2O sorption is high at cold temperatures (e.g., -20 °C), the effect of humidity on a practical cyclic DAC process is expected to be minimal due to slow H2O uptake kinetics. This work suggests that the CO2 capture mechanisms of impregnated amines can be controlled by adjusting the degree of amine-solid support interaction and that H2O adsorption behavior is strongly affected by the properties of the support materials. Thus, proper selection of solid support materials for amine impregnation will be important for achieving optimized DAC performance under varied deployment conditions, such as cold (e.g., -20 °C) or ambient temperature (e.g., 25 °C) operations.

Revealing carbon capture chemistry with 17-oxygen NMR spectroscopy

Carbon dioxide capture is essential to achieve net-zero emissions. A hurdle to the design of improved capture materials is the lack of adequate tools to characterise how CO2 adsorbs. Solid-state nuclear magnetic resonance (NMR) spectroscopy is a promising probe of CO2 capture, but it remains challenging to distinguish different adsorption products. Here we perform a comprehensive computational investigation of 22 amine-functionalised metal-organic frameworks and discover that 17O NMR is a powerful probe of CO2 capture chemistry that provides excellent differentiation of ammonium carbamate and carbamic acid species. The computational findings are supported by 17O NMR experiments on a series of CO2-loaded frameworks that clearly identify ammonium carbamate chain formation and provide evidence for a mixed carbamic acid - ammonium carbamate adsorption mode. We further find that carbamic acid formation is more prevalent in this materials class than previously believed. Finally, we show that our methods are readily applicable to other adsorbents, and find support for ammonium carbamate formation in amine-grafted silicas. Our work paves the way for investigations of carbon capture chemistry that can enable materials design.

Review on CO2 Capture Using Amine-Functionalized Materials

CO₂ capture from industry sectors or directly from the atmosphere is drawing much attention on a global scale because of the drastic changes in the climate and ecosystem which pose a potential threat to human health and life on Earth. In the past decades, CO₂ capture technology relied on classical liquid amine scrubbing. Due to its high energy consumption and corrosive property, CO₂ capture using solid materials has recently come under the spotlight. A variety of porous solid materials were reported such as zeolites and metal-organic frameworks. However, amine-functionalized porous materials outperform all others in terms of CO₂ adsorption capacity and regeneration efficiency. This review provides a brief overview of CO₂ capture by various amines and mechanistic aspects for newcomers entering into this field. This review also covers a state-of-the-art regeneration method, visible/UV light-triggered CO₂ desorption at room temperature. In the last section, the current issues and future perspectives are summarized.

Predicting the Mechanism and Products of CO2 Capture by Amines in the Presence of H2O

An extensive correlated molecular orbital theory study of the reactions of CO₂ with a range of substituted amines and H₂O in the gas phase and aqueous solution was performed at the G3(MP2) level with a self-consistent reaction field approach. The G3(MP2) calculations were benchmarked at the CCSD(T)/CBS level for NH₃ reactions. A catalytic NH₃ reduces the energy barrier more than a catalytic H₂O for the formation of H₂NCOOH and H₂CO₃. In aqueous solution, the barriers to form both H₂NCOOH and H₂CO₃ are reduced, with HCO₃^- formation possible with one amine present and H₂NCOO^- formation possible only with two amines. Further reactions of H₂NCOOH to form HNCO and urea via the Bazarov reaction have high barriers and are unlikely in both the gas phase and aqueous solution. Reaction coordinates for CH₃NH₂, CH₃CH₂NH₂, (CH₃)₂NH, CH₃CH₂CH₂NH₂, (CH₃)₃N, and DMAP were also calculated. The barrier for proton transfer correlates with amine basicity for alkylammonium carbamate (ΔG^‡_aq < 15 kcal/mol) and alkylammonium bicarbonate (ΔG^‡_aq < 30 kcal/mol) formation. In aqueous solution, carbamic acids, carbamates, and bicarbonates can all form in small amounts with ammonium carbamates dominating for primary and secondary alkylamines. These results have implications for CO₂ capture by amines in both the gas phase and aqueous solution as well as in the solid state, if enough water is present.

Unravelling moisture-induced CO2 chemisorption mechanisms in amine-modified sorbents at the molecular scale

This work entails a comprehensive solid-state NMR and computational study of the influence of water and CO₂ partial pressures on the CO₂-adducts formed in amine-grafted silica sorbents. Our approach provides atomic level insights on hypothesised mechanisms for CO₂ capture under dry and wet conditions in a tightly controlled atmosphere. The method used for sample preparation avoids the use of liquid water slurries, as performed in previous studies, enabling a molecular level understanding, by NMR, of the influence of controlled amounts of water vapor (down to ca. 0.7 kPa) in CO₂ chemisorption processes. Details on the formation mechanism of moisture-induced CO₂ species are provided aiming to study CO₂ : H₂O binary mixtures in amine-grafted silica sorbents. The interconversion between distinct chemisorbed CO₂ species was quantitatively monitored by NMR under wet and dry conditions in silica sorbents grafted with amines possessing distinct bulkiness (primary and tertiary). Particular attention was given to two distinct carbonyl environments resonating at δ _C ∼161 and 155 ppm, as their presence and relative intensities are greatly affected by moisture depending on the experimental conditions. 1D and 2D NMR spectral assignments of both these ¹³C resonances were assisted by density functional theory calculations of ¹H and ¹³C chemical shifts on model structures of alkylamines grafted onto the silica surface that validated various hydrogen-bonded CO₂ species that may occur upon formation of bicarbonate, carbamic acid and alkylammonium carbamate ion pairs. Water is a key component in flue gas streams, playing a major role in CO₂ speciation, and this work extends the current knowledge on chemisorbed CO₂ structures and their stabilities under dry/wet conditions, on amine-modified solid surfaces.

Great Location: About Effects of Surface Bound Neighboring Groups for Passive and Active Fine-Tuning of CO2 Adsorption Properties in Model Carbon Capture Materials

Improved carbon capture materials are crucial for managing the CO₂ level in the atmosphere. The past focus was on increasing adsorption capacities. It is widely known that controlling the heat of adsorption (ΔH_ads ) is equally important. If it is too low, CO₂ uptake takes place at unfavorable conditions and with insufficient selectivity. If it is too high, chemisorption occurs, and the materials can hardly be regenerated. The conventional approach for influencing ΔH_ads is the modification of the adsorbing center. This paper proposes an alternative strategy. The hypothesis is that fine-tuning of the molecular environment around the adsorbing center is a powerful tool for the adjustment of CO₂ -binding properties. Via click chemistry, any desired neighboring group (NG) can be incorporated on the surfaces of the nanoporous organosilica model materials. Passive NGs induce a change in the polarity of the surface, whereas active NGs are capable of direct interaction with the active center/CO₂ pair. The effects on ΔH_ads and on the selectivity are studied. A situation can be realized which resembles frustrated Lewis acid-base pairs, and the investigation of the binding-species by solid-state NMR indicates that the push-pull effects could play an essential role not only in CO₂ adsorption but also in its activation.

Resilient Intracrystalline Occlusions: A Solid-State NMR View of Local Structure as It Tunes Bulk Lattice Properties

In many marine organisms, biomineralization-the crystallization of calcium-based ionic lattices-demonstrates how regulated processes optimize for diverse functions, often via incorporation of agents from the precipitation medium. We study a model system consisting of l-aspartic acid (Asp) which when added to the precipitation solution of calcium carbonate crystallizes the thermodynamically disfavored polymorph vaterite. Though vaterite is at best only kinetically stable, that stability is tunable, as vaterite grown with Asp at high concentration is both thermally and temporally stable, while vaterite grown at 10-fold lower Asp concentration, yet 2-fold less in the crystal, spontaneously transforms to calcite. Solid-state NMR shows that Asp is sparsely occluded within vaterite and calcite. CP-REDOR NMR reveals that each Asp is embedded in a perturbed occlusion shell of ∼8 disordered carbonates which bridge to the bulk. In both the as-deposited vaterites and the evolved calcite, the perturbed shell contains two sets of carbonate species distinguished by their proximity to the amine and identifiable based on 13C chemical shifts. The embedding shell and the occluded Asp act as an integral until which minimally rearranges even as the bulk undergoes extensive reorganization. The resilience of these occlusion units suggests that large Asp-free domains drive the vaterite to calcite transformation-which are retarded by the occlusion units, resulting in concentration-dependent lattice stability. Understanding the structure and properties of the occlusion unit, uniquely amenable to ssNMR, thus appears to be a key to explaining other macroscopic properties, such as hardness.

Water Enables Efficient CO2 Capture from Natural Gas Flue Emissions in an Oxidation-Resistant Diamine-Appended Metal-Organic Framework

Supported by increasingly available reserves, natural gas is achieving greater adoption as a cleaner-burning alternative to coal in the power sector. As a result, carbon capture and sequestration from natural gas-fired power plants is an attractive strategy to mitigate global anthropogenic CO₂ emissions. However, the separation of CO₂ from other components in the flue streams of gas-fired power plants is particularly challenging due to the low CO₂ partial pressure (∼40 mbar), which necessitates that candidate separation materials bind CO₂ strongly at low partial pressures (≤4 mbar) to capture ≥90% of the emitted CO₂. High partial pressures of O₂ (120 mbar) and water (80 mbar) in these flue streams have also presented significant barriers to the deployment of new technologies for CO₂ capture from gas-fired power plants. Here, we demonstrate that functionalization of the metal-organic framework Mg₂(dobpdc) (dobpdc^4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) with the cyclic diamine 2-(aminomethyl)piperidine (2-ampd) produces an adsorbent that is capable of ≥90% CO₂ capture from a humid natural gas flue emission stream, as confirmed by breakthrough measurements. This material captures CO₂ by a cooperative mechanism that enables access to a large CO₂ cycling capacity with a small temperature swing (2.4 mmol CO₂/g with ΔT = 100 °C). Significantly, multicomponent adsorption experiments, infrared spectroscopy, magic angle spinning solid-state NMR spectroscopy, and van der Waals-corrected density functional theory studies suggest that water enhances CO₂ capture in 2-ampd-Mg₂(dobpdc) through hydrogen-bonding interactions with the carbamate groups of the ammonium carbamate chains formed upon CO₂ adsorption, thereby increasing the thermodynamic driving force for CO₂ binding. In light of the exceptional thermal and oxidative stability of 2-ampd-Mg₂(dobpdc), its high CO₂ adsorption capacity, and its high CO₂ capture rate from a simulated natural gas flue emission stream, this material is one of the most promising adsorbents to date for this important separation.

Dynamics in hydrophilic and hydrophobic molecular chains tethered to MCM41-type mesoporous silica upon wetting and dehydration processes

Surface modified mesoporous silica materials are important materials for heterogeneous catalysis and are attracting attention as potential drug carriers. The functionality of these materials relies on the physical and chemical properties of the tethers attached to MCM41 silica surface. These chemically linked tails act as molecular brushes, that can capture pollutant molecules, anchor points for catalysts and can host drug molecules. To utilize the full potential of the tailored silica surfaces, one should infer their properties at different levels of solvation. Here, ¹H MAS NMR spectroscopy is used to monitor the dynamic properties of two modified MCM41 materials, an aminopropyl tethered MCM41 and an octyl tethered MCM41, through the process of controlled hydration. The surface site resolved measurements demonstrate how the chemical nature of the two tethers governs the way water molecules are directed to the different sites in the porous materials.

Unravelling the Structure of Chemisorbed CO2 Species in Mesoporous Aminosilicas: A Critical Survey

Chemisorbent materials, based on porous aminosilicas, are among the most promising adsorbents for direct air capture applications, one of the key technologies to mitigate carbon emissions. Herein, a critical survey of all reported chemisorbed CO₂ species, which may form in aminosilica surfaces, is performed by revisiting and providing new experimental proofs of assignment of the distinct CO₂ species reported thus far in the literature, highlighting controversial assignments regarding the existence of chemisorbed CO₂ species still under debate. Models of carbamic acid, alkylammonium carbamate with different conformations and hydrogen bonding arrangements were ascertained using density functional theory (DFT) methods, mainly through the comparison of the experimental ¹³C and ¹⁵N NMR chemical shifts with those obtained computationally. CO₂ models with variable number of amines and silanol groups were also evaluated to explain the effect of amine aggregation in CO₂ speciation under confinement. In addition, other less commonly studied chemisorbed CO₂ species (e.g., alkylammonium bicarbonate, ditethered carbamic acid and silylpropylcarbamate), largely due to the difficulty in obtaining spectroscopic identification for those, have also been investigated in great detail. The existence of either neutral or charged (alkylammonium siloxides) amine groups, prior to CO₂ adsorption, is also addressed. This work extends the molecular-level understanding of chemisorbed CO₂ species in amine-oxide hybrid surfaces showing the benefit of integrating spectroscopy and theoretical approaches.

Elucidating CO2 Chemisorption in Diamine-Appended Metal-Organic Frameworks

The widespread deployment of carbon capture and sequestration as a climate change mitigation strategy could be facilitated by the development of more energy-efficient adsorbents. Diamine-appended metal-organic frameworks of the type diamine-M₂(dobpdc) (M = Mg, Mn, Fe, Co, Ni, Zn; dobpdc^4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) have shown promise for carbon-capture applications, although questions remain regarding the molecular mechanisms of CO₂ uptake in these materials. Here we leverage the crystallinity and tunability of this class of frameworks to perform a comprehensive study of CO₂ chemisorption. Using multinuclear nuclear magnetic resonance (NMR) spectroscopy experiments and van-der-Waals-corrected density functional theory (DFT) calculations for 13 diamine-M₂(dobpdc) variants, we demonstrate that the canonical CO₂ chemisorption products, ammonium carbamate chains and carbamic acid pairs, can be readily distinguished and that ammonium carbamate chain formation dominates for diamine-Mg₂(dobpdc) materials. In addition, we elucidate a new chemisorption mechanism in the material dmpn-Mg₂(dobpdc) (dmpn = 2,2-dimethyl-1,3-diaminopropane), which involves the formation of a 1:1 mixture of ammonium carbamate and carbamic acid and accounts for the unusual adsorption properties of this material. Finally, we show that the presence of water plays an important role in directing the mechanisms for CO₂ uptake in diamine-M₂(dobpdc) materials. Overall, our combined NMR and DFT approach enables a thorough depiction and understanding of CO₂ adsorption within diamine-M₂(dobpdc) compounds, which may aid similar studies in other amine-functionalized adsorbents in the future.

Silica-Supported Sterically Hindered Amines for CO2 Capture

Most studies exploring the capture of CO₂ on solid-supported amines have focused on unhindered amines or alkylimine polymers. It has been observed in extensive solution studies that another class of amines, namely sterically hindered amines, can exhibit enhanced CO₂ capacity when compared to their unhindered counterparts. In contrast to solution studies, there has been limited research conducted on sterically hindered amines on solid supports. In this work, one hindered primary amine and two hindered secondary amines are grafted onto mesoporous silica at similar amine coverages, and their adsorption performances are investigated through fixed bed breakthrough experiments and thermogravimetric analysis. Furthermore, chemisorbed CO₂ species formed on the sorbents under dry and humid conditions are elucidated using in situ Fourier-transform infrared spectroscopy. Ammonium bicarbonate formation and enhancement of CO₂ adsorption capacity is observed for all supported hindered amines under humid conditions. Our experiments in this study also suggest that chemisorbed CO₂ species formed on supported hindered amines are weakly bound, which may lead to reduced energy costs associated with regeneration if such materials were deployed in a practical separation process. However, overall CO₂ uptake capacities of the solid supported hindered amines are modest compared to their solution counterparts. The oxidative and thermal stabilities of the supported hindered amine sorbents are also assessed to give insight into their operational lifetimes.

The "Missing" Bicarbonate in CO2 Chemisorption Reactions on Solid Amine Sorbents

We have identified a hydrated bicarbonate formed by chemisorption of 13CO2 on both dimethylaminopropylsilane (DMAPS) and aminopropylsilane (APS) pendant molecules grafted on SBA-15 mesoporous silica. The most commonly used sequence in solid-state NMR, 13C CPMAS, failed to detect bicarbonate in these solid amine sorbent samples; here, we have employed a Bloch decay ("pulse-acquire") sequence (with 1H decoupling) to detect such species. The water that is present contributes to the dynamic motion of the bicarbonate product, thwarting CPMAS but enabling direct 13C detection by shortening the spin-lattice relaxation time. Since solid-state NMR plays a major role in characterizing chemisorption reactions, these new insights that allow for the routine detection of previously elusive bicarbonate species (which are also challenging to observe in IR spectroscopy) represent an important advance. We note that employing this straightforward NMR technique can reveal the presence of bicarbonate that has often otherwise been overlooked, as demonstrated in APS, that has been thought to only contain adsorbed CO2 as carbamate and carbamic acid species. As in other systems (e.g., proteins), dynamic species that sample multiple environments tend to broaden as their motion is frozen out. Here, we show two distinct bicarbonate species upon freezing, and coupling to different protons is shown through preliminary 13C-1H HETCOR measurements. This work demonstrates that bicarbonates have likely been formed in the presence of water but have gone unobserved by NMR due to the nature of the experiments most routinely employed, a perspective that will transform the way the sorption community will view CO2 capture by amines.

Detecting Proton Transfer in CO2 Species Chemisorbed on Amine-Modified Mesoporous Silicas by Using 13 C NMR Chemical Shift Anisotropy and Smart Control of Amine Surface Density

The wealth of site-selective structural information on CO₂ speciation, obtained by spectroscopic techniques, is often hampered by the lack of easy-to-control synthetic routes. Herein, an alternative experimental protocol that relies on the high sensitivity of ¹³ C chemical shift anisotropy (CSA) tensors to proton transfer, is presented to unambiguously distinguish between ionic/charged and neutral CO₂ species, formed upon adsorption of ¹³ CO₂ in amine-modified porous materials. Control of the surface amine spacing was achieved through the use of amine protecting groups during functionalisation prior to CO₂ adsorption. This approach enabled the formation of either "isolated" or "paired" carbamate/carbamic acid species, providing a first experimental NMR proof towards the identification of both aggregation states. Computer modelling of surface CO₂ -amine adducts assisted the solid-state NMR assignments and validated various hydrogen-bond arrangements occurring upon formation of isolated/aggregated carbamic acid and alkylammonium carbamate ion species. This work extends the understanding of chemisorbed CO₂ structures formed at pore surfaces and reveals structural insight about the protonation source responsible for the proton-transfer mechanism in such aggregates.

15N Solid State NMR Spectroscopic Study of Surface Amine Groups for Carbon Capture: 3-Aminopropylsilyl Grafted to SBA-15 Mesoporous Silica

Materials composed of high-porosity solid supports, such as SBA-15, containing amine-bearing moieties inside the pores, such as 3-aminopropylsilane (APS), are envisioned for carbon dioxide capture; solid-state ¹⁵N NMR can be highly informative for studying chemisorption reactions. Two ¹⁵N-enriched samples with different APS loadings were studied to probe the identity of the pendant molecules and structure of the chemisorbed CO₂ species. ¹⁵N cross-polarization magic-angle spinning NMR provides unique information about the amines, whether they are rigid or dynamic, by measuring contact time curves and rotating frame, T_1ρ(¹⁵N), relaxation. Both carbamate and carbamic acid are formed; carbamic acid is shown to be less stable than carbamate. After desorption, a steady state for the chemisorbed reaction product is reached, leaving behind carbamate. ¹⁵N NMR monitors the evolution of the species over time. During desorption, APS is regenerated, but the ammonium propylsilane intensity does not change, leading us to conclude that carbamic acid desorbs, while carbamate (to which ammonium propylsilane is ion paired) persists. A secondary ditehtered amine present does not react with CO₂, and we posit this may be due to its rigidity. These findings demonstrate the versatility of solid-state NMR to provide information about these complex CO₂ reactions with solid amine sorbents.

CO2 adsorption on different organo-modified SBA-15 silicas: a multidisciplinary study on the effects of basic surface groups

Hybrid organic-inorganic SBA-15 silicas functionalized with increasing amounts of amino groups were studied in this work aiming to evaluate the effects of their physico-chemical properties on CO₂ capture ability. Three different amino-silane species were used: 3-aminopropyltriethoxysilane (APTS), 3-(2-aminoethyl)aminopropyltrimethoxysilane (EAPTS) and 3-[2-(2-aminoethyl)aminoethyl] aminopropyltrimethoxysilane (PAPTS). More specifically, samples were prepared by using two methods, following a post-synthesis grafting procedure and a one-pot preparation method. Experimental and computational techniques were used to study the structural and textural properties of the obtained samples and their surface species in relation to the adopted preparation method. For the most reactive samples, additional hints on the interactions of organosilane species with the silica surface were obtained by a combination of IR and SS-NMR spectroscopy, with particular emphasis on the effects of the silane chain length on the mobility of the organic species. Advanced complementary solid-state NMR techniques provided deeper information on the interactions of organosilane species with the silica surface. Finally, the amount of CO₂ adsorbed was estimated by comparing the classical microcalorimetric analysis method with a new type of screening test, the Zero Length Column analysis, which is able to evaluate small amounts of samples in a very short time and the adsorption properties of the adsorbents. The reactivity of the amino-modified silica samples is deeply influenced by both the preparation route and by the type of organosilane used for the functionalization of the materials. In particular, samples prepared by the post-synthesis grafting procedure and containing higher amount of amino groups in the chain are more reactive, following the order PAPTS > EAPTS > APTS.

Preparation and characterization of molecularly imprinted solid amine adsorbent for CO2 adsorption

A molecularly imprinted solid amine adsorbent was successfully synthesized and exhibited excellent CO₂ adsorption performance under simulated flue gas.

A Diaminopropane-Appended Metal-Organic Framework Enabling Efficient CO2 Capture from Coal Flue Gas via a Mixed Adsorption Mechanism

A new diamine-functionalized metal-organic framework comprised of 2,2-dimethyl-1,3-diaminopropane (dmpn) appended to the Mg2+ sites lining the channels of Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) is characterized for the removal of CO2 from the flue gas emissions of coal-fired power plants. Unique to members of this promising class of adsorbents, dmpn-Mg2(dobpdc) displays facile step-shaped adsorption of CO2 from coal flue gas at 40 °C and near complete CO2 desorption upon heating to 100 °C, enabling a high CO2 working capacity (2.42 mmol/g, 9.1 wt %) with a modest 60 °C temperature swing. Evaluation of the thermodynamic parameters of adsorption for dmpn-Mg2(dobpdc) suggests that the narrow temperature swing of its CO2 adsorption steps is due to the high magnitude of its differential enthalpy of adsorption (Δhads = -73 ± 1 kJ/mol), with a larger than expected entropic penalty for CO2 adsorption (Δsads = -204 ± 4 J/mol·K) positioning the step in the optimal range for carbon capture from coal flue gas. In addition, thermogravimetric analysis and breakthrough experiments indicate that, in contrast to many adsorbents, dmpn-Mg2(dobpdc) captures CO2 effectively in the presence of water and can be subjected to 1000 humid adsorption/desorption cycles with minimal degradation. Solid-state 13C NMR spectra and single-crystal X-ray diffraction structures of the Zn analogue reveal that this material adsorbs CO2 via formation of both ammonium carbamates and carbamic acid pairs, the latter of which are crystallographically verified for the first time in a porous material. Taken together, these properties render dmpn-Mg2(dobpdc) one of the most promising adsorbents for carbon capture applications.

Spectroscopic Characterization of Adsorbed 13CO2 on 3-Aminopropylsilyl-Modified SBA15 Mesoporous Silica

Multiple chemisorption products are found from the interaction of CO₂ with the solid-amine sorbent, 3-aminopropyl silane (APS), bound to mesoporous silica (SBA15) using solid-state NMR and FTIR spectroscopy. We employed a combination of both ¹⁵N{¹³C} rotational-echo double-resonance (REDOR) NMR and ¹³C{¹⁵N} REDOR to determine the chemical identity of these products. ¹⁵N{¹³C} REDOR measurements are consistent with a single ¹³C-¹⁵N pair and distance of 1.45 Å. In contrast, both ¹³C{¹⁵N} REDOR and ¹³C CPMAS are consistent with multiple ¹³C products. ¹³C CPMAS shows two neighboring resonances, whose chemical shifts are consistent with carbamate (at 165 ppm) and carbamic acid. The ¹³C{¹⁵N} REDOR experiments resonant at 165 ppm show an incomplete buildup of the REDOR data to ∼90% of the expected maximum. We conclude this 10% missing intensity corresponds to a ¹³C NMR species that resonates at the identical chemical shift but that is not in dipolar contact with ¹⁵N. These data are consistent with the presence of bicarbonate, HCO₃^-, since it is commonly observed at ∼165 ppm and lacks ¹⁵N for dipolar coupling.

CO2-Selective Absorbents in Air: Reverse Lipid Bilayer Structure Forming Neutral Carbamic Acid in Water without Hydration

Emission gas and air contain not only CO₂ but also plentiful moisture, making it difficult to achieve selective CO₂ absorption without hydration. To generate absorbed CO₂ (wet CO₂) under heating, the need for external energy to release the absorbed water has been among the most serious problems in the fields of carbon dioxide capture and storage (CCS) and direct air capture (DAC). We found that the introduction of the hydrophobic phenyl group into alkylamines of CO₂ absorbents improved the absorption selectivity between CO₂ and water. Furthermore, ortho-, meta-, and para-xylylenediamines (OXDA, MXDA, PXDA, respectively) absorbed only CO₂ in air without any hydration. Notably, MXDA·CO₂ was formed as an anhydrous carbamic acid even in water, presumably because it was covered with hydrophobic phenyl groups, which induces a reverse lipid bilayer structure. Dry CO₂ was obtained from heating MXDA·CO₂ at 103-120 °C, which was revealed to involve chemically the Grignard reaction to form the resulting carboxylic acids in high yields.

Fine-Tuning of the Carbon Dioxide Capture Capability of Diamine-Grafted Metal-Organic Framework Adsorbents Through Amine Functionalization

A combined sonication and microwave irradiation procedure provides the most effective functionalization of ethylenediamine (en) and branched primary diamines of 1-methylethylenediamine (men) and 1,1-dimethylethylenediamine (den) onto the open metal sites of Mg₂ (dobpdc) (1). The CO₂ capacities of the advanced adsorbents 1-en and 1-men under simulated flue gas conditions are 19 wt % and 17.4 wt %, respectively, which are the highest values reported among amine-functionalized metal-organic frameworks (MOFs) to date. Moreover, 1-den exhibits both a significant working capacity (12.2 wt %) and superb CO₂ uptake (11 wt %) at 3 % CO₂ . Additionally, this framework showcases the superior recyclability; ultrahigh stability after exposure to O₂ , moisture, and SO₂ ; and exceptional CO₂ adsorption capacity under humid conditions, which are unprecedented among MOFs. We also elucidate that the performance of CO₂ adsorption can be controlled by the structure of the diamine ligands grafted such as the number of amine end groups or the presence of side groups, which provides the first systematic and comprehensive demonstration of fine-tuning of CO₂ uptake capability using different amines.

Elucidation of Surface Species through in Situ FTIR Spectroscopy of Carbon Dioxide Adsorption on Amine-Grafted SBA-15

The nature of the surface species formed through the adsorption of CO₂ on amine-grafted mesoporous silica is investigated through in situ FTIR spectroscopy with the aid of ¹⁵ N dynamic nuclear polarization (DNP) and ¹³ C NMR spectroscopy. Primary, secondary, and tertiary amines are functionalized onto a mesoporous SBA-15 silica. Both isotopically labeled ¹³ CO₂ and natural-abundance CO₂ are used for accurate FTIR peak assignments, which are compared with assignments reported previously. The results support the formation of monomeric and dimeric carbamic acid species on secondary amines that are stabilized differently to the monocarbamic acid species on primary amines. Furthermore, the results from isotopically labelled ¹³ CO₂ experiments suggest the existence of two carbamate species on primary amines, whereas only one species is observed predominantly on secondary amines. The analysis of the IR peak intensities and frequencies indicate that the second carbamate species on primary amines is probably more asymmetric in nature and forms in a relatively smaller amount. Only the formation of bicarbonate ions at a low concentration is observed on tertiary amines; therefore, physisorbed water on the surface plays a role in the hydrolysis of CO₂ even if water is not added intentionally and dry gases are used. This suggests that a small amount of bicarbonate ions could be expected to form on primary and secondary amines, which are more hydrophilic than tertiary amines, and these low concentration species are difficult to observe on such samples.