Interesting Green Catalysis of Cyclohexane Oxidation over Metal Tetrakis(4-carboxyphenyl)porphyrins Promoted by Zinc Sulfide

Generation of high-valent iron-oxo porphyrin cation radicals on hemin loaded carbon nanotubes for efficient degradation of sulfathiazole

Hemin has attracted considerable interest as an efficient catalyst recently, however, its direct application is inefficient due to severe molecular aggregation. Immobilizing hemin on various supports is a feasible approach to address this issue. In this work, a CNTs-hemin catalyst was prepared by loading hemin onto multiwalled carbon nanotubes (CNTs) through ball milling. Compared with hemin, CNTs-hemin demonstrates remarkably enhanced performance in the peroxymonosulfate system, with a 650-fold improvement of apparent rate constant, reaching 97.8% degradation of sulfathiazole in 5 min. High-valent iron-oxo porphyrin cation ((Porp)^+•Fe^IV=O) radicals are proposed as the dominant reactive species in the CNTs-hemin/peroxymonosulfate system instead of sulfate radicals (SO₄^•-), hydroxyl radicals (•OH), superoxide radicals (O₂^•-) and singlet oxygen (¹O₂). More in-depth mechanisms reveal that the strong electron transfer between CNTs and hemin promotes the generation of (Porp)^+•Fe^IV=O radicals through a heterolysis pathway. This research enriches the understanding of the catalytic mechanism of supported biomimetic catalysts for PMS activation and provides a perspective on the role of support materials for catalytic activity.

Iron porphyrin-TiO2 modulated peroxymonosulfate activation for efficient degradation of 2,4,6-trichlorophenol with high-valent iron-oxo species

Developing efficient catalysts with low cost and environmental friendliness for peroxymonosulfate (PMS) activation attracts broad interest. In this study, TiO₂-hemin was prepared by immobilizing hemin on TiO₂ using a ball milling method, demonstrating 126.9-fold enhanced catalytic degradation efficiency compared with unsupported hemin in the PMS activation system, with 92.9% of 2,4,6-trichlorophenol (2,4,6-TCP) removed in 10 min. The superior performance is attributed to the strong interaction between TiO₂ and hemin, which induces the redistribution of the electron density of hemin molecules. In the TiO₂-hemin/PMS system, sulfate radicals (SO₄^•-), hydroxyl radicals (•OH), singlet oxygen (¹O₂), and superoxide radicals (O₂^•-) were identified, which only played a minor role in the elimination of 2,4,6-TCP. Instead, high-valent iron-oxo species were proposed and identified as the primary active species. This study provides a facile strategy to enhance the activity of the biomimetic catalyst and offers insight into the catalytic mechanism of iron porphyrin with PMS activation.

Ronald C.D. Breslow (1931-2017): A career in review

Reviewed herein are key research accomplishments of Professor Ronald Charles D. Breslow (1931-2017) throughout his more than 60 year research career. These accomplishments span a wide range of topics, most notably physical organic chemistry, medicinal chemistry, and bioorganic chemistry. These topics are reviewed, as are topics of molecular electronics and origin of chirality, which combine to make up the bulk of this review. Also reviewed briefly are Breslow's contributions to the broader chemistry profession, including his work for the American Chemical Society and his work promoting gender equity. Throughout the article, efforts are made to put Breslow's accomplishments in the context of other work being done at the time, as well as to include subsequent iterations and elaborations of the research.

Catalytic oxidation of cycloalkanes by porphyrin cobalt(II) through efficient utilization of oxidation intermediates

The catalytic oxidation of cycloalkanes using molecular oxygen employing porphyrin cobalt(II) as catalyst was enhanced through use of cycloalkyl hydroperoxides, which are the primary intermediates in oxidation of cycloalkanes, as additional oxidants to further oxidize cycloalkanes in the presence of porphyrin copper(II), especially for cyclohexane, for which the selectivity was enhanced from 88.6 to 97.2% to the KA oil; at the same time, the conversion of cyclohexane was enhanced from 3.88 to 4.41%. The enhanced efficiency and selectivity were mainly attributed to the avoided autoxidation of cycloalkanes and efficient utilization of oxidation intermediate cycloalkyl hydroperoxides as additional oxidants instead of conventional thermal decomposition. In addition to cyclohexane, the protocol presented in this research is also very applicable in the oxidation of other cycloalkanes such as cyclooctane, cycloheptane and cyclopentane, and can serve as a applicable and efficient strategy to boost the conversion and selectivity simultaneously in oxidation of alkanes. This work also is a very important reference for the extensive application of metalloporphyrins in catalysis chemistry.

Highly Active Catalysis of Cobalt Tetrakis(pentafluorophenyl)porphyrin Promoted by Chitosan for Cyclohexane Oxidation in Response-Surface-Methodology-Optimized Reaction Conditions

We aimed at elevating catalytic performances of cobalt tetrakis(pentafluorophenyl)porphyrin (Co TPFPP) through axial coordination, nanocavities, and covalently grafting action. The Co TPFPP was immobilized onto nanoporous and nonporous chitosan, forming Co TPFPP/np‐ and nonp‐CTS catalysts, respectively. The catalysts were characterized by various spectroscopic techniques. The catalytic performances of these catalysts for cyclohexane oxidation under response‐surface‐methodology‐optimized oxidation reaction conditions were estimated and compared. Co TPFPP/np‐CTS was an excellent catalyst at aspect of catalytic activity, exhibiting the considerable potential reusability, 24.2 mol % yields (KA oil : cyclohexanone and cyclohexanol) in average, and total turnover frequencies (TOFs) of 3.25×10⁶ h⁻¹. This is attributed to the structural characteristics of the Co TPFPP/np‐CTS catalyst: the cobalt porphyrin molecules could be highly scattered on CTS, forming the independent active sites, and were not leached. The axial coordination exerted the most important effect on the catalytic activity, and the covalent grafting action had a decisive effect on the increase of the total TOFs and on the reusability of the catalyst.

Practicably efficient ethylbenzene oxidation catalyzed by manganese tetrakis(4-sulfonatophenyl)porphyrin grafted to powdered chitosan

Manganese tetrakis(4-sulfonatophenyl)porphyrin chloride was grafted onto powdered chitosan via an acid–base reaction and ligation. The grafted catalyst was characterized by transmission electron microscopy, ultraviolet and visible spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectrometry and thermogravimetry. Ethylbenzene oxidation with O[Formula: see text] by the catalyst in the absence of additives and solvents can achieve moderate yields (approximately 30%) of acetophenone and phenethyl alcohol. The grafted catalyst can be reused four times for oxidation reactions. The results indicate that the catalytic activity of manganese tetrakis(4-sulfonatophenyl)porphyrin chloride is promoted by the ligation and grafting function of the amino groups in the powdered chitosan.

“Ship in a bottle” Porph@MOMs as highly efficient catalysts for selective controllable oxidation and insights into different mechanisms in heterogeneous and homogeneous environments

3D “ship in a bottle” Porph@MOMs with selectivity control capability and interesting catalytic properties were used as biomimetic oxidation catalysts for different reactions.

Oxygen oxidation of ethylbenzene over manganese porphyrin is promoted by the axial nitrogen coordination in powdered chitosan

A less wasteful production method of oxidation ethylbenzene to acetophenone and phenethyl alcohol was adviced. It revealed an important role in tuning catalytic reactivity of metalloporphyrins by the axial ligand for oxidation of hydrocarbon.