Golden Carbon Nanotube Membrane for Continuous Flow Catalysis

Selective Nitrate Electroreduction to Ammonia on CNT Electrodes with Controllable Interfacial Wettability

The development of electrocatalysts that can efficiently reduce nitrate (NO3-) to ammonia (NH3) has garnered increasing attention due to their potential to reduce carbon emissions and promote environmental protection. Intensive efforts have focused on catalyst development, but a thorough understanding of the effect of the microenvironment around the reactive sites of the catalyst is also crucial to maximize the performance of the electrocatalysts. This study explored an electrocatalytic system that utilized quaternary ammonium surfactants with a range of alkyl chain lengths to modify an electrode made of carbon nanotubes (CNT), with the goal of regulating interfacial wettability toward NO3- reduction. Trimethyltetradecylammonium bromide with a moderate alkyl chain length created a very hydrophobic interface, which led to a high selectivity in the production of NH3 (∼87%). Detailed mechanistic investigations that used operando Fourier-transform infrared (FTIR) spectroscopy and online differential electrochemical mass spectrometry (DEMS) revealed that the construction of a hydrophobic modified CNT played a synergistic role in suppressing a side reaction involving the generation of hydrogen, which would compete with the reduction of NO3-. This electrocatalytic system led to a favorable process for the reduction of NO3- to NH3 through a direct electron transfer pathway. Our findings underscore the significance of controlling the hydrophobic surface of electrocatalysts as an effective means to enhance electrochemical performance in aqueous media.

Facile Synthesis and Environmental Applications of Noble Metal-Based Catalytic Membrane Reactors

Noble metal nanoparticle-loaded catalytic membrane reactors (CMRs) have emerged as a promising method for water decontamination. In this study, we proposed a convenient and green strategy to prepare gold nanoparticle (Au NPs)-loaded CMRs. First, the redox-active substrate membrane (CNT-MoS2) composed of carbon nanotube (CNT) and molybdenum disulfide (MoS2) was prepared by an impregnation method. Water-diluted Au(III) precursor (HAuCl4) was then spontaneously adsorbed on the CNT-MoS2 membrane only through filtration and reduced into Au(0) nanoparticles in situ, which involved a “adsorption–reduction” process between Au(III) and MoS2. The constructed CNT-MoS2@Au membrane demonstrated excellent catalytic activity and stability, where a complete 4-nitrophenol transformation can be obtained within a hydraulic residence time of <3.0 s. In addition, thanks to the electroactivity of CNT networks, the as-designed CMR could also be applied to the electrocatalytic reduction of bromate (>90%) at an applied voltage of −1 V. More importantly, by changing the precursors, one could further obtain the other noble metal-based CMR (e.g., CNT-MoS2@Pd) with superior (electro)catalytic activity. This study provided new insights for the rational design of high-performance CMRs toward various environmental applications.

Electropolymerization of Metal Clusters Establishing a Versatile Platform for Enhanced Catalysis Performance

Atomically precise metal clusters are attractive as highly efficient catalysts, but suffer from continuous efficiency deactivation in the catalytic process. Here, we report the development of an efficient strategy that enhances catalytic performance by electropolymerization (EP) of metal clusters into hybrid materials. Based on carbazole ligand protection, three polymerized metal-cluster hybrid materials, namely Poly-Cu₁₄ cba, Poly-Cu₆ Au₆ cbz and Poly-Cu₆ Ag₄ cbz, were prepared. Compared with isolated metal clusters, metal clusters immobilizing on a biscarbazole network after EP significantly improved their electron-transfer ability and long-term recyclability, resulting in higher catalytic performance. As a proof-of-concept, Poly-Cu₁₄ cba was evaluated as an electrocatalyst for reducing nitrate (NO₃ ^- ) to ammonia (NH₃ ), which exhibited ≈4-fold NH₃ yield rate and ≈2-fold Faraday efficiency enhancement compared to that of Cu₁₄ cba with good durability. Similarly, Poly-Cu₆ Au₆ cbz showed 10 times higher photocatalytic efficiency towards chemical warfare simulants degradation than the cluster counterpart.

Fabrication and catalytic application of tandem reactor module using Au nanoparticles-coated glass beads as packing materials

A tandem reactor module using Au nanoparticles (NPs)-coated glass beads as packing materials is designed and fabricated for the catalytic reduction of 4-NP. Au NPs-coated glass beads are firstly prepared...

Evaluation of fluoride adsorption in solution by synthetic Al2 O3 /CeO2 : A fixed-bed column study

A highly efficient fluoride adsorbent Al₂ O₃ /CeO₂ was synthesized in this work and used it to fluoride removal in the fixed-bed adsorption through changing the different experimental conditions (influent F^- concentration, flow velocity, and bed heights). The adsorption capacity was 9.72 mg/g. In addition, the Adams-Bohart and Thomas models were used to fit and evaluate the column breakthrough curve of fluoride removal process by Al₂ O₃ /CeO₂ , and the correlation coefficients (R² ) of the Thomas model were close to 1 under all experimental conditions. The structure of Al₂ O₃ /CeO₂ and the adsorption mechanism were confirmed by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), N₂ adsorption and desorption isotherm, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Moreover, the adsorption of fluoride (F^- ) was mainly through metal binding (MF) and hydroxyl binding (AlOH⋯F) on the surface of the Al₂ O₃ /CeO₂ . Furthermore, the regeneration and coexisting anions studies of Al₂ O₃ /CeO₂ were carried out, and the efficiency of adsorption was still above 70% after five cycles. PRACTITIONER POINTS: Removal of fluoride was studied by fixed-bed experiment, and the adsorption capacity of composite Al₂ O₃ /CeO₂ was 9.72 mg/g. The metal complex played important role in fluoride removal and reusability makes a long-term application for fluoride adsorption. Fluoride wastewater is pumped to the fixed-bed column, and fluoride ions are absorbed by Al₂ O₃ /CeO₂ through fluoride metal complex and aluminum hydrofluoride.

Catalytic membrane-based oxidation-filtration systems for organic wastewater purification: A review

Catalytic membranes can simultaneously realize physical separation and chemical oxidation in one integrated system, which is the frontier technology for effective removal of organic containments in wastewater treatment. The catalytic membrane coupled with advanced oxidation processes (AOPs) not only significantly enhances the pollutant removal efficiency but also inhibits the fouling of the membrane via self-cleaning. In this review, the preparation approaches of catalytic membranes including blending, surface coating, and bottom-up synthesis are comprehensively summarized. The different integrated catalytic membrane systems coupled with photocatalysis, Fenton oxidation, persulfate activations, ozonation and electrocatalytic oxidation are discussed in terms of mechanisms and performance. Besides, the principles, influencing factors, advantages and issues of the different catalytic membrane/oxidation systems are outlined comparatively. Finally, the future challenges, and research directions are suggested, which is conducive to the design and development of catalytic membrane-oxidation systems for practical remediation of organic containing wastewater.

Recent Catalytic Advances in Hydrotreatment Processes of Pyrolysis Bio-Oil

Catalytic hydrotreatment (HT) is one of the most important refining steps in the actual petroleum-based refineries for the production of fuels and chemicals, and it will play also a crucial role for the development of biomass-based refineries. In fact, the utilization of HT processes for the upgrading of biomass and/or lignocellulosic residues aimed to the production of synthetic fuels and chemical intermediates represents a reliable strategy to reduce both carbon dioxide emissions and fossil fuels dependence. At this regard, the catalytic hydrotreatment of oils obtained from either thermochemical (e.g., pyrolysis) or physical (e.g., vegetable seeds pressing) processes allows to convert biomass-derived oils into a biofuel with properties very similar to conventional ones (so-called drop-in biofuels). Similarly, catalytic hydro-processing also may have a key role in the valorization of other biorefinery streams, such as lignocellulose, for the production of high-added value chemicals. This review is focused on recent hydrotreatment developments aimed to stabilizing the pyrolytic oil from biomasses. A particular emphasis is devoted on the catalyst formulation, reaction pathways, and technologies.

In situ growth gold nanoparticles in three-dimensional sugarcane membrane for flow catalytical and antibacterial application

In this work, we decorated gold nanoparticles (Au NPs) in the porous, three-dimensional sugarcane membrane for the flow catalytical and antibacterial application. Due to the uniformly distributed Au NPs in sugarcane channels and the porous structure of sugarcane, the interaction between contaminant and catalysis was enhanced as water flowing through the Au NPs/sugarcane membrane. The Au NPs/sugarcane membrane exhibited superior catalytical efficiency for removing methylene blue (MB) with a turn over frequency of 0.27 mol_MB·mol_Au^-1·min^-1 and the water treatment rate reached up to 1.15×10⁵ L/m² h with >98.3 % MB removal efficiency. The Au NPs/sugarcane membrane also exhibited superior bacterial removal efficiency as E. coli suspension flowing through it, due to the superimposition effects of physical barrier in sugarcane and the antibacterial property of Au NPs. The tremendous catalytical and antibacterial performance of Au NPs/sugarcane membrane provides a promising potential for the rational design of flow catalytical membrane reactor to purify the microbial contaminated water.

High efficient reduction of 4-nitrophenol and dye by filtration through Ag NPs coated PAN-Si catalytic membrane

Catalytic membrane plays an important role in environmental remedy. In this study, we reported an Ag coated membrane (PAN-Si-Cu-Ag) with a high catalytic activity to reduce 4-nitrophenol (4-NP) and methyl orange (MO) from water. The best performance is 99% reduction degree and 280 L m^-2.h^-1.bar^-1 flux for (4-NP) reduction at 4-NP: NaBH₄ = 1:50 (mM) during a 12-h filtration. The reduction degree for MO is above 90% and the flux is about 230 L m^-2·h^-1·bar^-1, which is almost the best report till now. The Ag coated membrane was prepared by metal displacement-epitaxial growth on silica covalent grafted PAN membrane (PAN-Si). Silica atoms were used as linker to ensure the good adhesion between polymer and metal NPs, the loss amount of Ag NPs from the coated catalytic membrane is loss about 2 μg/cm² after one month storage. Cheap metal NPs were firstly reduced on the surface of PAN-Si membrane and then used to displace Ag ions. Thus the obtained catalytic membrane showed a very high loading (28%). Finally, the catalytic filtration mechanism of 4-NP was distinguished by Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and adsorption measurement.

Processing Methods Used in the Fabrication of Macrostructures Containing 1D Carbon Nanomaterials for Catalysis

A large number of methodologies for fabrication of 1D carbon nanomaterials have been developed in the past few years and are extensively described in the literature. However, for many applications, and in particular in catalysis, a translation of the materials to a macro-structured form is often required towards their use in practical operation conditions. This review intends to describe the available methods currently used for fabrication of such macro-structures, either already applied or with potential for application in the fabrication of macro-structured catalysts containing 1D carbon nanomaterials. A review of the processing methods used in the fabrication of macrostructures containing 1D sp2 hybridized carbon nanomaterials is presented. The carbon nanomaterials here discussed include single- and multi-walled carbon nanotubes, and several types of carbon nanofibers (fishbone, platelet, stacked cup, etc.). As the processing methods used in the fabrication of the macrostructures are generally very similar for any of the carbon nanotubes or nanofibers due to their similar chemical nature (constituted by stacked ordered graphene planes), the review aggregates all under the carbon nanofiber (CNF) moniker. The review is divided into methods where the CNFs are synthesized already in the form of a macrostructure (in situ methods) or where the CNFs are previously synthesized and then further processed into the desired macrostructures (ex situ methods). We highlight in particular the advantages of each approach, including a (non-exhaustive) description of methods commonly described for in situ and ex situ preparation of the catalytic macro-structures. The review proposes methods useful in the preparation of catalytic structures, and thus a number of techniques are left out which are used in the fabrication of CNF-containing structures with no exposure of the carbon materials to reactants due to, for example, complete coverage of the CNF. During the description of the methodologies, several different macrostructures are described. A brief overview of the potential applications of such structures in catalysis is also offered herein, together with a short description of the catalytic potential of CNFs in general.

Supported Atomically-Precise Gold Nanoclusters for Enhanced Flow-through Electro-Fenton

Gold (Au) has been considered catalytically inert for decades, but recent reports have described the ability of Au nanoparticles to catalyze H₂O₂ decomposition in the Haber-Weiss cycle. Herein, the design and demonstration of a flow-through electro-Fenton system based on an electrochemical carbon nanotube (CNT) filter functionalized with atomically precise Au nanoclusters (AuNCs) is described. The functionality of the device was then tested for its ability to catalyze antibiotic tetracycline degradation. In the functional filters, the Au core of AuNCs served as a high-performance Fenton catalyst; while the AuNCs ligand shells enabled CNT dispersion in aqueous solution for easy processing. The hybrid filter enabled in situ H₂O₂ production and catalyzed the subsequent H₂O₂ decomposition to HO·. The catalytic function of AuNCs lies in their ability to undergo redox cycling of Au⁺/Au⁰ under an electric field. The atomically precise AuNCs catalysts demonstrated superior catalytic activity to larger nanoparticles; while the flow-through design provided convection-enhanced mass transport, which yielded a superior performance compared to a conventional batch reactor. The adsorption behavior and decomposition pathway of H₂O₂ on the filter surfaces were simulated by density functional theory calculations. The research outcomes provided atomic-level mechanistic insights into the Au-mediated Fenton reaction.

Microwave assistant rapid synthesis MCM-41-NH2 from fly ash and Cr(VI) removal performance

Synthesis of silicon materials from fly ash is an ecologically justified process aimed at the transformation of energy sector waste-fly ash into mesoporous silicon material of broad possible application field. In this study, the MCM-41-NH₂ was successfully synthesized from industrial solid waste fly ash via a facile and fast process of alkali fusion method under the assistant of microwave. Due to the employ of microwave, the aging time was controlled within 30 min, which was significantly shorter than that of traditional hydrothermal method (48-72 h). And, the obtained MCM-41-NH₂ was shown an excellent performance to remove Cr(VI) from solution under the investigation of fixed-bed column. The maximum adsorption capacity for Cr(VI) was 53.77 mg/g. Additionally, the effect of initial concentration, flow rate, bed height, and pH on Cr(VI) removal were investigated, and the models of Thomas and Adams-Bohart were applied to predict the experiment data; the correlation coefficients (R²) of Thomas model under the investigated conditions were all close to 1. Furthermore, the adsorbent was characterized by N₂ adsorption-desorption isotherm, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), zeta potential, ultraviolet-visible spectroscopy (UV-vis), X-ray photoelectron spectroscopy (XPS), and NH₃-Temperature Programmed Desorption (NH₃-TPD). The results showed that amino groups play an important role in the adsorption process. Cr(VI) was firstly adsorbed on the surface of the MCM-41-NH₂, and then some of the adsorbed Cr(VI) were reduced to Cr(III) by the release of the protons of the ammonium. The information showed that MCM-41-NH₂ could be an effective and low-cost sorbent for removing Cr(VI) from wastewater. Furthermore, recycling experiments showed that the spent adsorbent had high catalytic performance for methyl mercaptan (CH₃SH). Graphical abstract .

Simultaneous oxidation and sorption of highly toxic Sb(III) using a dual-functional electroactive filter

One of the topics gaining lots of recent attention is the antimony (Sb) pollution. We have designed a dual-functional electroactive filter consisting of one-dimensional (1-D) titanate nanowires and carbon nanotubes for simultaneous oxidation and sorption of Sb(III). Applying an external limited DC voltage assist the in-situ conversion of highly toxic Sb(III) to less toxic Sb(V). The Sb(III) removal kinetics and efficiency were enhanced with flow rate and applied voltage (e.g., the Sb(III) removal efficiency increased from 87.5% at 0 V to 96.2% at 2 V). This enhancement in kinetics and efficiency are originated from the flow-through design, more exposed sorption sites, electrochemical reactivity, and limited pore size on the filter. The titanate-CNT hybrid filters perform effectively across a wide pH range of 3-11. Only negligible inhibition was observed in the presence of nitrate, chloride, and carbonate at varying concentrations. Our analyses using STEM, XPS, or AFS demonstrate that Sb were mainly adsorbed by Ti. DFT calculations suggest that the Sb(III) oxidation kinetics can be accelerated by the applied electric field. Exhausted titanate-CNT filters can be effectively regenerated by using NaOH solution. Moreover, the Sb(III)-spiked tap water generated ∼2400 bed volumes with a >90% removal efficiency. This study provides new insights for rational design of continuous-flow filters for the decontamination of Sb and other similar heavy metal ions.

A chloride-radical-mediated electrochemical filtration system for rapid and effective transformation of ammonia to nitrogen

Water contamination from ammonia has recently became a global concern. Herein, a chloride-radical-mediated electrochemical filtration system has been developed towards effective and rapid conversion of ammonia to nitrogen (N₂). This continuous-flow system consists of a nanoscale tin oxide modified carbon nanotube (SnO₂-CNT) anode and a Pd-Cu co-modified Ni foam (Pd-Cu/NF) cathode. The SnO₂-CNT anode enables the Cl^- oxidation to a chloride radical (Cl) at a proper anode potential (e.g., 2.5 V vs. Ag/AgCl) without severe self-oxidation. The macro-porous Pd-Cu/NF cathode further reduces anodic by-products (e.g., NO₃^- and NO₂^-) to N₂. EPR and scavenging tests indicate that Cl was the dominant radical specie responsible for ammonia conversion. Anode potentials, chloride concentration, flow rate and solution pH were identified as key parameters affecting the overall conversion performance. The proposed continuous-flow system showed enhanced conversion kinetics as compared to the conventional batch reactor due to the convectively enhanced mass transport. This study provides new insight for the rational design of advanced continuous-flow systems towards ammonia decontamination from water bodies.

Recent advances on photocatalytic fuel cell for environmental applications-The marriage of photocatalysis and fuel cells

Environmental pollution and energy crisis have become recent worldwide concerns. Huge amounts of organic wastes are discharged into water bodies, causing serious environmental pollution. Meanwhile, these organic compounds are important carbon and energy sources that could be utilized instead of being discarded. A smart design of a photocatalytic fuel cell (PFC) can achieve double benefits: it can degrade organic pollutants and at the same time generate energy. In this review article, we discuss recent progress in the development of PFC systems, and summarize the principles for constructing advanced PFC systems. We particularly focus on the rational design of electrode materials in terms of surface, morphology, facet, and interfacial reaction engineering. The impact of important operational parameters on PFC performance is further discussed in detail. We then discuss the major limitations and opportunities for future PFCs research. The development of smart and advanced PFC systems depends on highly interdisciplinary collaborations, which require concerted efforts from the communities of materials science, chemistry, engineering, and environmental science.

Controlled Layer-By-Layer Deposition of Carbon Nanotubes on Electrodes for Microbial Fuel Cells

Carbon nanotubes (CNTs) and polyelectrolyte poly(allylamine hydrochloride) (PAH) composite modified indium tin oxide (ITO) electrodes, by a layer-by-layer (LBL) self-assembly technique, was evaluated as an anode for microbial fuel cells (MFCs). The bioelectrochemistry of Shewanella loihica PV-4 in an electrochemical cell and the electricity generation performance of MFCs with multilayer (CNTs/PAH)n-deposited ITO electrodes as an anode were investigated. Experimental results showed that the current density generated on the multilayer modified electrode increased initially and then decreased as the deposition of the number of layers (n = 12) increased. Chronoamperometric results showed that the highest peak current density of 34.85 ± 2.80 mA/m2 was generated on the multilayer (CNTs/PAH)9-deposited ITO electrode, of which the redox peak current of cyclic voltammetry was also significantly enhanced. Electrochemical impedance spectroscopy analyses showed a well-formed nanostructure porous film on the surface of the multilayer modified electrode. Compared with the plain ITO electrode, the multilayered (CNTs/PAH)9 anodic modification improved the power density of the dual-compartment MFC by 29%, due to the appropriate proportion of CNTs and PAH, as well as the porous nanostructure on the electrodes.

In vivo and in vitro efficient textile wastewater remediation by Aspergillus niger biosorbent

In this work, the treatment of textile wastewater by a facile and high-efficiency technology using eco-friendly Aspergillus niger as a biosorbent was investigated. We measured physical changes (weight, size) during the formation and growth of fungus pellets and the pH values that influence the adsorption performance and biosorption mechanism. Three acid anionic dyes containing Acid Orange 56, Acid Blue 40 and Methyl Blue were chosen as model dyes to investigate batch adsorption efficiency. Two adsorption models (in vivo and in vitro) were adopted to decolorize the acid dyes. The results show that fungus pellets have excellent decoloration abilities with a high adsorption efficiency of 98% for 200 mg L-1 of acid dye. The pH value of the dye solution varied with the adsorption time and the dye removal efficiency greatly depended on the pH. The bioadsorption mechanism of nano-scale hyphae was revealed to be mainly due to electrostatic interactions caused by the pH change. Furthermore, the surface morphologies of the fungus after adsorption indicated that the dyes had been adsorbed on the surface of the fungus mycelia. Moreover, prepared 3D fungus/GO aerogels demonstrated superior dye removal abilities compared with fungus aerogels.

In situ synthesis of carbon nanotube-encapsulated cobalt nanoparticles by a novel and simple chemical treatment process: efficient and green catalysts for the Heck reaction

In this study, we present a novel, fast and easy technique for the synthesis of metal nanoparticles supported onto the internal surface of multi-walled CNTs; these CNT-encapsulated nanoparticles as heterogeneous, efficient, inexpensive and green catalysts efficiently promote the Heck cross-coupling of a large library of functional substrates under mild and sustainable conditions.

Nanoscale iron (oxyhydr)oxide-modified carbon nanotube filter for rapid and effective Sb(iii) removal

Herein, nanoscale iron (oxyhydr)oxide-coated carbon nanotube (CNT) filters were rationally designed for rapid and effective removal of Sb(iii) from water. These iron (oxyhydr)oxide particles (<5 nm) were uniformly coated onto the CNT sidewalls. The as-fabricated hybrid filter demonstrated improved sorption kinetics and capacity compared with the conventional batch system. At a flow rate of 6 mL min⁻¹, a Sb(iii) pseudo-first-order adsorption rate constant of 0.051 and a removal efficiency of >99% was obtained when operated in the recirculation mode. The improved Sb(iii) sorption performance can be ascribed to the synergistic effects of convection-enhanced mass transport, limited pore size, and more exposed active sorption sites of the filters. The presence of 1–10 mmol L⁻¹ of carbonate, sulfate, and chloride inhibits Sb(iii) removal negligibly. Exhausted hybrid filters can be effectively regenerated by an electrical field-assisted chemical washing method. STEM characterization confirmed that Sb was mainly sequestered by iron (oxyhydr)oxides. XPS, AFS and XAFS results suggest that a certain amount of Sb(iii) was converted to Sb(v) during filtration. DFT calculations further indicate that the bonding energy for Sb(iii) onto the iron (oxyhydr)oxides was 2.27–2.30 eV, and the adsorbed Sb(iii) tends to be oxidized.

Herein, nanoscale iron (oxyhydr)oxide-coated carbon nanotube (CNT) filters were rationally designed for rapid and effective removal of Sb(iii) from water.

Self-immobilized Pd nanowires as an excellent platform for a continuous flow reactor: efficiency, stability and regeneration

Despite extensive use of Pd nanocrystals as catalysts, the realization of a Pd-based continuous flow reactor remains a challenge. Difficulties arise due to ill-defined anchoring of the nanocrystals on a substrate and reactivity of the substrate under different reaction conditions. We demonstrate the first metal (Pd) nanowire-based catalytic flow reactor that can be used across different filtration platforms, wherein, reactants flow through a porous network of nanowires (10-1000 nm pore sizes) and the product can be collected as filtrate. Controlling the growth parameters and obtaining high aspect ratio of the nanowires (diameter = ∼13 nm and length > 8000 nm) is necessary for successful fabrication of this flow reactor. The reactor performance is similar to a conventional reactor, but without requiring energy-expensive mechanical stirring. Synchrotron-based EXAFS studies were used to examine the catalyst microstructure and Operando FT-IR spectroscopic studies were used to devise a regenerative strategy. We show that after prolonged use, the catalyst performance can be regenerated up to 99% by a simple wash-off process without disturbing the catalyst bed. Thus, collection, regeneration and redispersion processes of the catalyst in conventional industrial reactors can be avoided. Another important advantage is avoiding specific catalyst-anchoring substrates, which are not only expensive, but also non-universal in nature.

Ligand-Free Nano-Au Catalysts on Nitrogen-Doped Graphene Filter for Continuous Flow Catalysis

In this study, the authors rationally designed a high-performance catalytic filter for continuous flow catalysis. The catalytic filter consisted of ligand-free nanoscale gold (nano-Au) catalysts and nitrogen-doped graphene (N-rGO). The Au catalyst was fabricated in situ onto a pre-formed N-rGO support by the NaBH₄ reduction of the Au precursor, and the size of the nano-Au was fine-tuned. A hydrothermal pretreatment of graphene oxide enriched nitrogen-containing species on the surface of two-dimensional graphene supports and enhanced the affinity of Au precursors onto the support via electrocatalytic attraction. The nano-Au catalysts acted as high-performance catalysts, and the N-rGO acted as ideal filter materials to anchor the catalysts. The catalytic activity of the as-designed catalytic filter was evaluated using 4-nitrophenol (4-NP) hydrogenation as a model catalytic reaction. The catalytic filters demonstrated superior catalytic activity and excellent stability, where a complete 4-nitrophenol conversion was readily achieved via a single pass through the catalytic filter. The as-fabricated catalytic filter outperformed the conventional batch reactors due to evidently improved mass transport. Some key operational parameters impacting the catalytic performance were identified and optimized. A similar catalytic performance was also observed for three 4-nitrophenol spiked real water samples (e.g., surface water, tap water, and industrial dyeing wastewater). The excellent catalytic activity of the nano-Au catalysts combined with the two-dimensional and mechanically stable graphene allowed for the rational design of various continuous flow catalytic membranes for potential industrial applications.

Polyaniline/Carbon Nanotubes Composite Modified Anode via Graft Polymerization and Self-Assembling for Microbial Fuel Cells

Microbial fuel cells (MFCs) are promising devices for sustainable energy production, wastewater treatment and biosensors. Anode materials directly interact with electricigens and accept electrons between cells, playing an important role in determining the performance of MFCs. In this study, a novel carbon nanotubes (CNTs) and polyaniline (PANI) nanocomposite film modified Indium-tin oxide (ITO) anode was fabricated through graft polymerization of PANI after the modification of γ-aminopropyltriethoxysilane (APTES) on ITO substrate, which was followed by layer-by-layer (LBL) self-assembling of CNTs and PANI alternatively on its surface. (CNTs/PANI)_n/APTES/ITO electrode with low charge transfer resistance showed better electrochemical behavior compared to the bare ITO electrode. Twelve layers of CNTs/PANI decorated ITO electrode with an optimal nanoporous network exhibited superior biocatalytic properties with a maximal current density of 6.98 µA/cm², which is 26-fold higher than that of conventional ITO electrode in Shewanella loihica PV-4 bioelectrochemical system. MFCs with (CNTs/PANI)₁₂/APTES/ITO as the anode harvested a maximum output power density of 34.51 mW/m², which is 7.5-fold higher than that of the unmodified ITO electrode. These results demonstrate that (CNTs/PANI)_12/APTES/ITO electrode has superior electrochemical and electrocatalytic properties compared to the bare ITO electrode, while the cellular toxicity of CNTs has an effect on the performance of MFC with (CNTs/PANI)_n/APTES/ITO electrode.

Au25(SR)18: the captain of the great nanocluster ship

Noble metal nanoclusters are in the intermediate state between discrete atoms and plasmonic nanoparticles and are of significance due to their atomically accurate structures, intriguing properties, and great potential for applications in various fields. In addition, the size-dependent properties of nanoclusters construct a platform for thoroughly researching the structure (composition)-property correlations, which is favorable for obtaining novel nanomaterials with enhanced physicochemical properties. Thus far, more than 100 species of nanoclusters (mono-metallic Au or Ag nanoclusters, and bi- or tri-metallic alloy nanoclusters) with crystal structures have been reported. Among these nanoclusters, Au25(SR)18-the brightest molecular star in the nanocluster field-is capable of revealing the past developments and prospecting the future of the nanoclusters. Since being successfully synthesized (in 1998, with a 20-year history) and structurally determined (in 2008, with a 10-year history), Au25(SR)18 has stimulated the interest of chemists as well as material scientists, due to the early discovery, easy preparation, high stability, and easy functionalization and application of this molecular star. In this review, the preparation methods, crystal structures, physicochemical properties, and practical applications of Au25(SR)18 are summarized. The properties of Au25(SR)18 range from optics and chirality to magnetism and electrochemistry, and the property-oriented applications include catalysis, chemical imaging, sensing, biological labeling, biomedicine and beyond. Furthermore, the research progress on the Ag-based M25(SR)18 counterpart (i.e., Ag25(SR)18) is included in this review due to its homologous composition, construction and optical absorption to its gold-counterpart Au25(SR)18. Moreover, the alloying methods, metal-exchange sites and property alternations based on the templated Au25(SR)18 are highlighted. Finally, some perspectives and challenges for the future research of the Au25(SR)18 nanocluster are proposed (also holding true for all members in the nanocluster field). This review is directed toward the broader scientific community interested in the metal nanocluster field, and hopefully opens up new horizons for scientists studying nanomaterials. This review is based on the publications available up to March 2018.

Polydopamine Induced in-Situ Formation of Metallic Nanoparticles in Confined Microchannels of Porous Membrane as Flexible Catalytic Reactor

Oxidant-regulated polymerization of dopamine was exploited, for the first time, for effective surface engineering of the well-defined cylindrical pores of nuclear track-etched membranes (NTEMs) to develop novel catalytic membrane reactor. First, in the presence of a strong oxidant, controlled synthesis of polydopamine (PDA) with tunable particle size was achieved, allowing a homogeneous deposition to the confined pore channels of NTEMs. The PDA interfaces rich in catechol and amine groups provided enhanced hydrophilicity to promote mass transport across the membrane and abundant nucleation sites for formation and stabilization of metallic nanoparticles (NPs). In-situ reductive growth of multiple metallic NPs, including Pd, Ag, and Au, was then achieved inside the cylindrical pores of NTEMs. Using the functionalized membrane as a catalytic reactor, efficient reduction of 4-nitrophenol (4-NP) was demonstrated in a flow-through mode. Moreover, after dissolution removal of the NTEMs, self-sustained one-dimensional (1D) PDA/M (M = Pd, Ag, or Au) hybrid nanotubes (NTs), with determined aspect ratio and a length reaching up to 10 μm, were obtained for catalysis of 4-NP in a batch reaction mode. This study established a facile and versatile method, by rational tuning of the polymerization behavior of dopamine, for effective modification of confined microscale/nanoscale cavities with different surface characteristics. The integration of PDA chemistry with NTEMs would provide more opportunities for development of novel catalytic membrane reactors as well as for the tailored synthesis of functional 1D nanotubes for broadened applications.

Conductive 3D sponges for affordable and highly-efficient water purification

Effective, affordable and low energy water purification technologies are highly desirable to address the current environmental issues. In this study, we developed a low-cost method to achieve efficient organic pollutants degradation by incorporating conductive nanomaterials (i.e., carbon nanotubes, CNTs) to assist electro-oxidation, leading to an efficient conductive nano-sponge filtration device. The integration of electrochemistry has significantly improved the performance of the sponge-based device to adsorb and oxidize organic compounds in aqueous solution. In particular, CNT materials could serve as both high-performance electro-catalysts for pollutant degradation and conductive additives that make polyurethane sponges highly conductive. On the other hand, the polyurethane sponge could work as a low-cost and highly porous matrix that could effectively host these CNT conductors. The conductive sponge can be easily fabricated by a simple dying based approach. The as-fabricated gravity fed device could effectively oxidize two model organic compounds (i.e., >92% antibiotic tetracycline and >94% methyl orange) via a single pass through the conductive sponge under the optimized experimental conditions (e.g., [Na₂SO₄] = 10 mmol L^-1, [CNT] = 0.3 mg mL^-1, and [SDBS] = 2.0 mg mL^-1). We have achieved >88% degradation efficiency for the antibiotic tetracycline within 6 h of continuous operation with an average electro-oxidation flux of 0.82 ± 0.05 mol h^-1 m^-2 and an energy requirement of 1.0 kW h kg^-1 COD or <0.02 kW h m^-3. These promising data make our CNT-sponge filtration device attractive for affordable and effective water purification.

Effect of ligand structure on the size control of mono- and bi-thiolate-protected silver nanoclusters

Ligand structure could control the size and structure of thiolate-protected silver nanoclusters (Ag NCs) in water. Small alkane-thiols, medium-sized aromatic-thiols, and bulky thiol-containing tri-peptides direct the formation of Ag₂₅(SR)₁₈, Ag₄₄(SR)₃₀, and Ag_9-15(SR)_5-10, respectively. In addition, small alkane-thiol collocates well with other types of thiolate ligand to generate bi-thiolate-protected Ag₂₅ NCs with controlled ligand landscapes on their surfaces.

Dual Probe Sensors Using Atomically Precise Noble Metal Clusters

This article adds a new direction to the functional capability of protein-protected atomically precise gold clusters as sensors. Counting on the extensively researched intense luminescence of these clusters and considering the electron donating nature of select amino acids, we introduce a dual probe sensor capable of sensing changes in luminescence and conductivity, utilizing bovine serum albumin-protected atomically precise gold clusters hosted on nanofibers. To this end, we have also developed a hybrid nanofiber with a conducting core with a porous dielectric shell. We show that clusters in combination with nanofibers offer a highly selective and sensitive platform for the detection of trace quantities of trinitrotoluene, both in solution and in the vapor phase. In the solution phase, trinitrotoluene (TNT) can be detected down to 1 ppt at room temperature, whereas in vapor phase, 4.8 × 10⁹ molecules of TNT can be sensed using a 1 mm fiber. Although the development in electrospinning techniques for fabricating nanofibers as sensors is quite substantial, a hybrid fiber with the dual properties of conductivity and luminescence has not been reported yet.

Micron-Sized Pored Membranes Based on Polyvinylidene Difluoride Hexafluoropropylene Prepared by Phase Inversion Techniques

In this study, micron-sized pored membranes, based on the co-polymer polyvinylidene difluoride hexafluoropropylene (PVdF-HFP) were prepared via phase inversion techniques. The aim of the approach was to find less harmful and less toxic solvents to fabricate such films. Therefore, the Hansen solubility approach was used to identify safer and less toxic organic solvents for the phase inversion process, relative to present solvent mixtures, based on acetone, dimethyl formamide, dimethyl acetamide or methanol. With this approach, it was possible to identify cyclopentanone, ethylene glycol and benzyl alcohol as suitable solvents for the membrane preparation process. Physicochemical and mechanical properties were analyzed and compared, which revealed a uniform membrane structure through the cross section. Differences were observed at the top surface, in dependence of both preparation approaches, which are described in detail.

Uniformly dispersed platinum-cobalt alloy nanoparticles with stable compositions on carbon substrates for methanol oxidation reaction

Alloying platinum (Pt) with suitable transition metals is effective way to enhance their catalytic performance for methanol oxidation reaction, and reduce their cost at mean time. Herein, we report our investigation on the synthesis of bimetallic platinum-cobalt (PtCo) alloy nanoparticles, their activation, as well as the catalytic evaluation for methanol oxidation reaction. The strategy starts with the synthesis of PtCo alloy nanoparticles in an organic medium, followed by loading on carbon substrates. We then remove the capping agent by refluxing the carbon-supported PtCo particles in acetic acid before electrochemical measurements. We emphasize the change in composition of the alloys during refluxing process, and the initial PtCo alloys with Pt/Co ratio of 1/2 turns into stable alloys with Pt/Co ratio of 3/1. The final Pt₃Co particles have uniform distribution on carbon substrates, and exhibit activity with 2.4 and 1.5 times of that for commercial Pt/C and PtRu/C for methanol oxidation reaction.

Structural characterization and electrochemical performance of macroporous graphite-like C3N3 prepared by the Wurtz reaction and heat treatment

g-C₃N₃ is synthesized by a facile method and further heat treatment can improve the initial coulombic efficiency and reversible capacity.

A novel synthesis protocol for Co3O4 nanocatalysts and their catalytic applications

Green synthesis of Co₃O₄-NPs by a HPCM method using Azadirachta indica leaf extract is reported. HRTEM shows hollow sphere like NPs with polycrystalline nature and it is used in catalytic applications.

Ultrasensitive room-temperature ethanol detection based on Au functionalized nanoporous SnO2/C60/SnO2 composites

An Au functionalized nanoporous SnO₂/C₆₀/SnO₂ gas sensor exhibits an extremely sensitive, selective sub-ppm level ethanol gas detection at room temperature.