Degradation of Organic Dyes over Fenton-Like Cu2O–Cu/C Catalysts

Ultrasmall copper-metal organic framework (Cu-MOF) quantum dots decorated on waste derived biochar for enhanced removal of emerging contaminants: Synergistic effect and mechanistic insight

This study proposes a novel one-pot hydrothermal impregnation strategy for surface decoration of waste derived pisum sativum biochar with zero‒dimensional Cu‒MOF Quantum dots (PBC‒HK), with an average particle size of 5.67 nm, for synergistic removal of an emerging sulfur containing drug pantoprazole (PTZ) and Basic Blue 26 (VB) dye within 80 min and 50 min of visible-light exposure, respectively. The designed Integrated Photocatalytic Adsorbent (IPA) presented an enhanced PTZ removal efficiency of 95.23% with a catalyst loading of 0.24 g/L and initial PTZ conc. 30 mg/L at pH 7, within 80 min via synergistic adsorption and photodegradation under visible-light exposure. While, on the other hand, 96.31% VB removal efficiency was obtained in 50 min with a catalyst dosage of 0.20 g/L, initial VB conc. 60 mg/L at pH 7 under similar irradiation conditions. An in-depth analysis of the synergistic adsorption and photocatalysis mechanism resulting in the shortened time for the removal of contaminants in the synergistic integrated model has been performed by outlining the various advantageous attributes of this strategy. The first-order degradation rate constant for PTZ was found to be 0.04846 min-1 and 0.04370 min-1 for PTZ and VB, respectively. Adsorption of contaminant molecules on the biochar (PS‒BC) surface can facilitate photodegradation by accelerating the kinetics, and photodegradation promotes regeneration of adsorption sites, contributing to an overall reduction in operation time for removal of contaminants. Besides enhancing the adsorption of targeted pollutants, the carbon matrix of IPAs serves as a surface for adsorption of intermediates of degradation, thereby minimizing the risk of secondary pollution. The photogenerated holes present in the VB is responsible for the generation of •OH radicals. While, the photogenerated electrons present in the CB are captured by Cu2+ of the MOF metal center, reducing it to Cu+, which is subsequently oxidized to produce additional •OH species in the aqueous medium. This process leads to effective charge separation of the photogenerated charge carriers and minimizes the probability of charge recombination as evident from photoluminescence (PL) analysis. Meanwhile, PL studies, EPR and radical trapping experiments indicate the predominant role of •OH radicals in the removal mechanism of PTZ and VB. The investigation of the degradation reaction intermediates was confirmed by HR‒LCMS, on the basis of which the plausible degradation pathway was elucidated in detail. Moreover, effects of pH, inorganic salts, other organic compounds and humic acid concentration have been investigated in detail. The environmental impact of the proposed method was comprehensively evaluated by ICP-OES analysis and TOC and COD removal studies. Furthermore, the economic feasibility and the cost-effectiveness of the catalyst was assessed to address the potential for large scale commercialization. Notably, this research not only demonstrates a rational design strategy for the utilization of solid waste into treasure via the fabrication of IPAs based on MOF Quantum dots (QDs) and waste-derived biochar, but also provides a practical solution for real wastewater treatment systems for broader industrial applications.

Surface activation via selective dealloying of Cu-based metallic glasses for efficient catalytic behavior

Surface activation is considered to regulate the electronic structures of materials for enhancing catalytic capability. Herein, we report a controllable strategy for constructing three-dimensional micro-nanoporous copper catalysts with high reactivity and activity for the degradation reaction of organic pollutants. Various micro-nanoporous structures and in situ formation processes by chemical selective dealloying of Cu-based metallic glasses are evaluated due to the surface modification. The porous catalysts exhibit superior catalytic performance, attributing to the catalytic mechanisms related to the superior surface activity of nanoscale copper composites and the strong oxidizing capability of activated radicals. These findings will provide a promising synthesis approach for three-dimensional micro-nanoporous catalysts for many chemical reactions.

In Situ Synthesis of Cu2O Nanoparticles Using Eucalyptus globulus Extract to Remove a Dye via Advanced Oxidation

Water pollution, particularly from organic contaminants like dyes, is a pressing issue, prompting exploration into advanced oxidation processes (AOPs) as potential solutions. This study focuses on synthesizing Cu2O on cellulose-based fabric using Eucalyptus globulus leaf extracts. The resulting catalysts effectively degraded methylene blue through photocatalysis under LED visible light and heterogeneous Fenton-like reactions with H2O2, demonstrating reusability. Mechanistic insights were gained through analyses of the extracts before and after Cu2O synthesis, revealing the role of phenolic compounds and reducing sugars in nanoparticle formation. Cu2O nanoparticles on cellulose-based fabric were characterized in terms of their morphology, structure, and bandgap via SEM-EDS, XRD, Raman, FTIR, UV-Vis DRS, and TGA. The degradation of methylene blue was pH-dependent; photocatalysis was more efficient at neutral pH due to hydroxyl and superoxide radical production, while Fenton-like reactions showed greater efficiency at acidic pH, primarily generating hydroxyl radicals. Cu2O used in Fenton-like reactions exhibited lower reusability compared to photocatalysis, suggesting deterioration. This research not only advances understanding of catalytic processes but also holds promise for sustainable water treatment solutions, contributing to environmental protection and resource conservation.

Enhanced Fenton-like catalysis via interfacial regulation of g-C3N4 for efficient aromatic organic pollutant degradation

For the efficient degradation of organic pollutants with the goal of reducing the water environment pollution, we employed an alkaline hydrothermal treatment on primeval g-C3N4 to synthesize a hydroxyl-grafted g-C3N4 (CN-0.5) material, from which we engineered a novel Fenton-like catalyst, known as Cu-CN-0.5. The introduction of numerous hydroxyl functional groups allowed the CN-0.5 substrate to stably fix active copper oxide particles through surface complexation, resulting in a low Cu leaching rate during a Cu-CN-0.5 Fenton-like process. A sequence of characterization techniques and theoretical calculations uncovered that interfacial complexation induced charge redistribution on the Cu-CN-0.5 surface. Specifically, some of the π electrons in the tris-s-triazine units were transferred to the copper oxide particles along the newly formed chemical bonds (C(π)-O-Cu), forming a π-deficient area on the tris-s-triazine plane near the complexation site. In a typical Cu-CN-0.5 Fenton-like process, a stable π-π interaction was established due to the favorable positive-negative match of electrostatic potential between the aromatic pollutants and π-deficient areas, leading to a significant improvement in Cu-CN-0.5's adsorption capacity for aromatic pollutants. Furthermore, pollutants also delivered electrons to the Cu-CN-0.5 Fenton-like system via a "through-space" approach, which suppressed the futile oxidation of H2O2 in reducing the high-valent Cu2+ and significantly improved the generation efficiency of •OH with high oxidative capacity. As expected, Cu-CN-0.5 not only exhibited an efficient Fenton degradation for several typical aromatic organic pollutants, but also demonstrated both a low metal leaching rate (0.12 mg/L) and a H2O2 utilization rate exceeding 80%. The distinctive Fenton degradation mechanism substantiated the potential of the as-prepared material for effective wastewater treatment applications.

Synergistic oxidation of humic acid treated by H2O2/O3 activated by CuCo/C with high efficiency and wide pH range

Combination of oxidation processes are one of the most promising humic acid treatment technologies. Single oxidant or even two oxidants in advance oxidation process can hardly achieve satisfactory removal efficiency of refractory organic matter, mainly humic acid, in the treatment process of reverse osmosis concentrates from landfill leachate. To solve this problem, this study investigated the synergistic degradation of Humic acid (HA) using a Cu and Co supported on carbon catalyst (CuCo/C) in a Hydrogen peroxide (H2O2) with ozone (O3) system. The catalyst was characterized by performing SEM, XRD, BET, XPS and FTIR technologies. UV-vis spectra, 3D Excitation Emission Matrix Spectra (3D-EEM) and gas chromatography-mass spectrometry (GC-MS) were applied for exploring degradation mechanism of HA. To further understand the oxidation mechanism, electron paramagnetic resonance (EPR) was used to evaluate the generation of hydroxyl (·OH) and superoxide radicals (O2·-). As a result, CuCo/C catalyst possessed stable catalytic performance for HA degradation with a wide pH range from 5 to 8, while T = 40 °C，catalyst dosage of 2.4 g/L，O3 intake rate of 0.15 g/min and H2O2 dosage of 1.92 mL/L, the degradation rate of total organic carbon (TOC) achieved 40-46.5 mg·L-1min-1. As affirmed by the EPR, ·OH and O2·- were effectively generated with addition of the CuCo/C catalyst. Degradation performance of UV254 proved that the catalytic activity can still be maintained above 95% with removal rate of 82% after 5 cycles reuse. GC-MS shows that the oxidation products mainly consist of amide, benzoheterocyclic ring and carboxylic acid. This work promotes an effective method for degrading HA, which has the potential for satisfactory application in landfill leachate.

The self-designed reactor to achieve efficient degradation of polyvinyl alcohol under high-pressure and high-temperature conditions

A huge amount of polyvinyl alcohol (PVA) fabric is abandoned from nuclear power plants every year, the traditional treatment process will occupy land resources and pollute the environment; therefore, a lot of research has been carried out on the chemical treatment of PVA fabric. Herein, the performance of degradation of polyvinyl alcohol under high-pressure and high-temperature conditions is investigated. The effects of the initial pH value, reaction temperature, molar ratio of H2O2/Fe2+, and H2O2 dosage on PVA degradation were evaluated. In the tested ranges in this work, the degradation of PVA fabric via high-pressure and high-temperature method was optimum at the initial pH value of 4, reaction temperature of 300℃, molar ratio of H2O2/Fe2+ as 10, and H2O2 dosage of 13 g/L. The PVA removal rate and TOC removal rate were 99.99% and 97.36%, respectively. Meanwhile, the high-pressure and high-temperature methods also had a great effect on the removal of Rhodamine-B and Reactive Red X-3B, the removal rates of Rhodamine-B and Reactive Red X-3B were 99.83% and 99.76%, respectively. The reaction mechanism of high-pressure and high-temperature methods was also discussed in this study.

Tumor Targeted Cuprous-Based Nanocomposite as Responsive Cascade Nanocatalyst for Efficient Tumor Synergistic Therapy

The single-functionality of traditional chemodynamic therapy (CDT) reagents usually limits the therapeutic efficacy of cancer treatment. Synergistic nanocomposites that involve cascade reaction provide a promising strategy to achieve satisfactory anticancer effects. Herein, a cuprous-based nanocomposite (CCS@GOx@HA) is fabricated, which owns the tumor targeting ability and can undergo tumor microenvironment responsive cascade reaction to enhance the tumor therapeutic efficiency significantly. Surface modification of nanocomposite with hyaluronic acid enables the targeted delivery of the nanocomposite to cancer cells. Acid-triggered decomposition of nanocomposite in cancer cell results in the release of Cu+ , Se2- and GOx. The Cu+ improves the Fenton-like reaction with endogenous H2 O2 to generate highly toxic • OH for CDT. While GOx can not only catalyze the in situ generation of endogenous H2 O2 , but also accelerate the consumption of intratumoral glucose to reduce nutrient supply in tumor site. In addition, Se2- further improves the therapeutic effects of CDT by upregulating the reactive oxygen species (ROS) in tumor cells. Meanwhile, the surface modification endows the nanocomposite the good water dispersibility and biocompatibility. Moreover, in vitro and in vivo experiments demonstrate satisfactory anti-cancer therapeutic performance by the synergistic cascade function of CCS@GOx@HA than CDT alone.

Synthesis of Kaolin-Supported Nickel Oxide Composites for the Catalytic Oxidative Degradation of Methylene Blue Dye

Organic dye contamination of water is a contributing factor to environmental pollution and has a negative impact on aquatic ecology. In this study, unsupported NiO and kaolin-supported NiO composites were synthesized by a one-step wet impregnation-precipitation method through the precipitation of nickel hydroxide onto locally accessible, inexpensive, and easily treated kaolin surfaces by using sodium hydroxide as a precipitating agent. The product was calcined at 500 °C and used for the catalytic oxidative degradation of methylene blue (MB) dye in an aqueous solution. The morphology, structure, and interactions of the synthesized materials were explored by SEM, XRD, and FT-IR spectroscopy. The characterization results revealed the fabrication and the growth of NiO on the kaolin surface. To determine the catalytic oxidative degradation performance of the catalyst, many experiments have been performed using the MB dye as a model dye. The catalytic degradation tests confirmed the importance of NiO and the high catalytic activity of the synthesized NiO/kaolin composite toward MB dye degradation. The oxidative degradation results showed that the optimized precursor amount on the kaolin surface could efficiently enhance the removal of MB dye. The kinetic investigation of the catalytic degradation of MB dye fitted the pseudo-first-order kinetic model. High removal efficiency was observed after eight reuse cycles, proving the exceptional stability and reusability of the composite. The catalytic process also proceeded with a low activation energy of 30.5 kJ/mol. In conclusion, the kaolin-supported NiO composite was established to be a favorable catalyst to degrade a model dye (MB) from an aqueous solution in the presence of inexpensive and easily available NaOCl with a catalytic efficiency of the material higher than 99% of the 20.3 mg catalyst within 6 min with an apparent rate constant, kapp, higher than 0.44625 min-1, which is far better than that of the unsupported catalyst with a kapp of 0.0926 min-1 at 10 mg dose in 20 min.

Immuno-Nanozymes Mediated Synergistic Chemodynamic/Immuno-Therapy with Potentiated Anti-Tumor Efficacy

Nanozymes mediated chemodynamic therapy (CDT) is a newly developed therapeutic modality with high specificity. The efficacy of CDT, however, still confronts challenges from the immune inhibitory tumor microenvironment (TME). It is thus of great significance to synergize CDT with immunotherapeutic interventions. Herein, this work reports the design and preparation of CpG loaded, Cu2+ doped double layered hydroxides nanosheets (CpG/Cu-LDHs) as immuno-nanozymes to potentiate overall anti-tumor efficacy by synergizing CDT with immunogenic cell death (ICD)-activated local and systemic immune responses. Such cooperative CDT-immuno effect together with immunosuppressive TME remodeling capacity conferred by CpG/Cu-LDHs led to effective suppression of both treated primary tumor and untreated distant tumor on a mouse tumor model. Thereby, synergizing CDT with ICD-driven, in situ vaccine-like immunotherapy by immuno-nanozymes provides a novel and generalized paradigm for devising highly efficient and specific anti-tumor strategy without the use of external stimulations.

Cu2O/Fe3O4/UiO-66 nanocomposite as an efficient fenton-like catalyst: Performance in organic pollutant degradation and influencing factors based machinelearning

The persistent presence of organic pollutants like dyes in water environment necessitates innovative approaches for efficient degradation. In this research, we developed an advanced hybrid catalyst by combining metal oxides (Cu2O, Fe3O4) with UiO-66, serving as a heterogeneous Fenton catalyst for for efficient RB19 breakdown in water with H2O2. The control factors to the catalytic behavior were also quantified by machine learning. Experimental results show that the catalytic performance was much better than its individual components (P < 0.05 & non-zero 95% C.I). The improved catalytic efficiency was linked to the occurrence of active metal centers (Fe, Cu, and Zr), with Cu(I) from Cu2O playing a crucial role in promoting increased production of HO•. Also, UiO-66 served as a catalyst support, attracting pollutants to the reaction center, while magnetic Fe3O4 aids catalyst recovery. The optimal experimental parameters for best performance were pH at 7, catalyst loading of 1.6 g/L, H2O2 strength of 0.16 M, and reaction temperature of 25 °C. The catalyst can be magnetically separated and regenerated after five recycling times without significantly reducing catalytic activity. The reaction time and pH were ranked as the most influencing factors on catalytic efficiency via Random Forest and SHapley Additive exPlanations models. The findings show that developed catalyst is a suitable candidate to remove dyes in water by Fenton heterogeneous reaction.

ZnO-based Cu metal-organic framework (MOF) nanocomposite for boosting and tuning the photocatalytic degradation performance

Although metal-organic frameworks (MOFs) are a viable choice for photocatalysts with large surface area and tunable pore structure, the rapid recombination of excited photogenerated charges results in low activity towards photodegradation. Aiming at improving the photocatalytic activities of MOFs, different strategies to incorporate MOF with light-harvesting semiconductors have been developed. In this research, we report an effective photocatalyst designed by incorporating Cu-MOF with ZnO for the photocatalytic degradation of Rose Bengal exhibiting excellent degradation efficiency of 97.4% in 45 min under natural sunlight with catalyst dosage of 320 mg/L. The optical, morphology and surface characteristics of the prepared nanocomposite were studied using scanning electron microscopy (SEM-EDX), high-resolution transmission electron microscopy (HRTEM), powder X-ray diffraction (PXRD), Brunauer-Emmett-Teller (BET) analysis, thermogravimetric (TGA) analysis, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and ultraviolet diffused reflectance spectroscopy (UV-DRS) techniques. Further studies showed that the degradation followed first-order kinetics with a rate constant of 0.077869 min-1. The degradation mechanism was investigated by photoluminescence (PL) study, XPS, zeta potential and quenching experiment in presence of different scavengers. Meanwhile, the fabricated composite displayed good recovery and reuse properties up to 5 cycles as revealed by XRD analysis proving itself a potential MOF-based photocatalyst towards environmental remediation process.

Carbon-Based Nanomaterials for Catalytic Wastewater Treatment: A Review

Carbon-based nanomaterials (CBM) have shown great potential for various environmental applications because of their physical and chemical properties. The unique hybridization properties of CBMs allow for the tailored manipulation of their structures and morphologies. However, owing to poor solar light absorption, and the rapid recombination of photogenerated electron-hole pairs, pristine carbon materials typically have unsatisfactory photocatalytic performances and practical applications. The main challenge in this field is the design of economical, environmentally friendly, and effective photocatalysts. Combining carbonaceous materials with carbonaceous semiconductors of different structures results in unique properties in carbon-based catalysts, which offers a promising approach to achieving efficient application. Here, we review the contribution of CBMs with different dimensions, to the catalytic removal of organic pollutants from wastewater by catalyzing the Fenton reaction and photocatalytic processes. This review, therefore, aims to provide an appropriate direction for empowering improvements in ongoing research work, which will boost future applications and contribute to overcoming the existing limitations in this field.

Nanostructured Gallium Nitride Membrane at Wafer Scale for Photo(Electro)catalytic Polluted Water Remediation

Photo(electro)catalysis methods have drawn significant attention for efficient, energy-saving, and environmental-friendly organic contaminant degradation in wastewater. However, conventional oxide-based powder photocatalysts are limited to UV-light absorption and are unfavorable in the subsequent postseparation process. In this paper, a large-area crystalline-semiconductor nitride membrane with a distinct nanoporous surface is fabricated, which can be scaled up to a full wafer and easily retrieved after photodegradation. The unique nanoporous surface enhances broadband light absorption, provides abundant reactive sites, and promotes the dye-molecule reaction with adsorbed hydroxyl radicals on the surface. The superior electric contact between the nickel bottom layer and nitride membrane facilitates swift charge carrier transportation. In laboratory tests, the nanostructure membrane can degrade 93% of the dye in 6 h under illumination with a small applied bias (0.5 V vs Ag/AgCl). Furthermore, a 2 inch diameter wafer-scale membrane is deployed in a rooftop test under natural sunlight. The membrane operates stably for seven cycles (over 50 h) with an outstanding dye degradation efficiency (>92%) and satisfied average total organic carbon removal rate (≈50%) in each cycle. This demonstration thus opens the pathway toward the production of nanostructured semiconductor layers for large-scale and practical wastewater treatment using natural sunlight.

Graphene shell-encapsulated copper-based nanoparticles (G@Cu-NPs) effectively activate peracetic acid for elimination of sulfamethazine in water under neutral condition

In this study, a graphene shell-encapsulated copper-based nanoparticles (G@Cu-NPs) was prepared and employed for peracetic acid (PAA) activation. The characterization of G@Cu-NPs confirmed that the as-prepared material was composed of Cu⁰ and Cu₂O inside and encapsulated by a graphene shell. Experimental results suggested that the synthesized G@Cu-NPs could activate PAA to generate free radicals for efficiently removing sulfamethazine (SMT) under neutral condition. The formation of graphene shells could strongly facilitated electron transfer from the core to the surface. Radical quenching experiments and electron spin resonance (ESR) analysis confirmed that organic radicals (R-O•) and hydroxyl radicals (•OH) were generated in the G@Cu-NPs/PAA system, and R-O• (including CH₃CO₃• and CH₃CO₂•) was the main contributor to the elimination of SMT. The possible SMT degradation pathways and mechanisms were proposed, and the toxicity of SMT and its intermediates was predicted with the quantitative structure-activity relationship (QSAR) analysis. Besides, the effects of some key parameters, common anions, and humic acid (HA) on the removal of SMT in the G@Cu-NPs/PAA system were also investigated. Finally, the applicability of G@Cu-NPs/PAA system was explored, showing that the G@Cu-NPs/PAA system possessed satisfactory adaptability to treat different water bodies with admirable reusability and stability.

A copper nanocluster-based multifunctional nanoplatform for augmented chemo/chemodynamic/photodynamic combination therapy of breast cancer

With the development of nano drug delivery system, the treatment mode that can overcome the shortcomings of chemotherapy drugs and integrate combined therapy remains to be explored. Herein, a nano drug system was designed to achieve the combined effect of chemo/chemodynamic/photodynamic therapy on cancer. Specifically, copper clusters (CuNCs) were used as the carrier, hyaluronic acid (HA) and doxorubicin (DOX) were coupled on CuNCs and then and chlorin e6 (Ce6) was introduced to form the self-assembled HA-CuNCs@DC nanoparticles. In this system, the HA-CuNCs@DC was involved in the reaction to the acidic tumor microenvironment (TME)-release of DOX, which could not only inhibit tumor growth through chemotherapy, but enhance the generation of hydrogen peroxide. CuNCs carriers had the properties of Fenton-like activity to realize chemodynamic therapy (CDT) and oxidase-like activity to deplete intracellular glutathione (GSH). Additionally, the chemotherapy drug susceptibility increased owing to the GSH depletion and the outbreak of reactive oxygen species, indicating the enhanced CDT efficacy and amplified chemotherapy efficacy. It was also noteworthy that Ce6 could be activated by 660 nm light to produce abundant singlet oxygen for photodynamic therapy. Overall, our platform demonstrated excellent biosafety and tumor suppression capabilities. This multimodal theranostic strategy provided new insights into cancer therapy.

V-Doped Cu2 Se Hierarchical Nanotubes Enabling Flow-Cell CO2 Electroreduction to Ethanol with High Efficiency and Selectivity

CO₂ electrocatalytic reduction (CO₂ ER) to multicarbon (C₂₊ ) products is heavily pursued because of their commercial values, and the efficiency and selectivity have both attracted tremendous attention. A flow-cell is a device configuration that can greatly enhance the conversion efficiency but requires catalysts to possess high electrical conductivity and gas permeability; meanwhile, the catalysts should enable the reaction pathway to specific products. Herein, it is reported that V-doped Cu₂ Se nanotubes with a hierarchical structure can be perfectly compatible with flow-cells and fulfil such a task, achieving CO₂ electroreduction to ethanol with high efficiency and selectivity. As revealed by the experimental characterization and theoretical calculation, the substitutional vanadium doping alters the local charge distribution of Cu₂ Se and diversifies the active sites. The unique active sites promote the formation of bridge *CO_B and its further hydrogenation to *COH, and, as such, the subsequent coupling of *COH and *CO_L eventually generates ethanol. As a result, the optimal Cu_1.22 V_0.19 Se nanotubes can electrocatalyze CO₂ to ethanol with a Faradaic efficiency of 68.3% and a partial current density of -207.9 mA cm^-2 for the single liquid product of ethanol at -0.8 V in a flow-cell. This work provides insights into the materials design for steering the reaction pathway toward C₂₊ products, and opens an avenue for flow-cell CO₂ ER toward a single C₂₊ liquid fuel.

Enhanced reactivity of the CuO-Fe2O3 intimate heterojunction for the oxidation of quinoline yellow dye (E104)

This research work describes the degradation of quinoline yellow (QY) in aqueous solutions by the heterogeneous Fenton and photo-Fenton processes in the presence of CuO/Fe₂O₃ photocatalyst. CuO/Fe₂O₃ derived from LDH structure was synthesized by the co-precipitation method. The physiochemical characteristics of CuO/Fe₂O₃ were described by XRD, TEM/SEM, BET surface area, and FTIR techniques. The effects of pH, H₂O₂ concentration, dye concentration, catalyst dose, reaction temperature, and reusability of catalyst on the QY decolorization efficiency were studied. The results indicated that a complete removal of QY was achieved within 150 min, when the H₂O₂ and QY concentrations were 27.6 mM and 100 mg/L, respectively. The rate constants for QY removal by the heterogeneous Fenton system were calculated, and the experimental data were found to fit the pseudo-first order model. Under optimal conditions, the rate constants were, respectively, 0.02032 and 0.01715 min^-1 for the photo-Fenton and Fenton systems; this means that the addition of light has not a noticeable effect.

Magnetic recyclable heterogeneous catalyst Fe3O4/g-C3N4 for tetracycline hydrochloride degradation via photo-Fenton process under visible light

Antibiotic pollution of water resources is a global problem, and the development of new treatments for destroying antibiotics in water is a priority research. We successfully manufactured recyclable magnetic Fe₃O₄/g-C₃N₄ through the electrostatic self-assembly method. Selecting tetracycline (TC) as the target pollutant, using Fe₃O₄/g-C₃N₄ and H₂O₂ developed a heterogeneous optical Fenton system to remove TC under visible light. Fe₃O₄/g-C₃N₄ was systematically characterized by SEM, TEM, XRD, FTIR, XPS, DRS, and electrochemical methods. The removal efficiency of 7% Fe₃O₄/g-C₃N₄ at pH = 3, H₂O₂ = 5 mM, and catalyst dosage of 1.0 g/L can reach 99.8%. After magnetic separation, the Fe₃O₄/g-C₃N₄ photocatalyst can be recycled five times with minimal efficiency loss. The excellent degradation performance of the prepared catalyst may be attributed to the proper coupling interface between Fe₃O₄ and g-C₃N₄ which promotes the separation and transfer of photogenerated electrons. Photogenerated electrons can also accelerate the conversion of Fe³⁺ to Fe²⁺, thereby producing more ˙OH. The new Fe₃O₄/g-C₃N₄ can be used as a raw material for advanced oxidation of water contaminated by refractory antibiotics.

Copper-doped carbon dots with enhanced Fenton reaction activity for rhodamine B degradation

The Fenton reaction has attracted extensive attention due to its potential to be a highly efficient and environmentally friendly wastewater treatment technology. Noble copper-doped carbon dots (CuCDs) are prepared through a simple one-step hydrothermal method with 3,4-dihydroxyhydrocinnamic acid, 2,2'-(ethylenedioxy)bis(ethylamine) and copper chloride, endowing the Fenton reaction with enhanced catalytic activity for rhodamine B (RhB) degradation. The effects of the concentration of CuCDs, temperature, pH, oxygen (O2), metal ions and polymers on the catalytic activity of CuCDs are investigated. It is worth noting that electron transfer happening on the surface of CuCDs plays a vital role in the RhB degradation process. As evidenced by radical scavenger experiments and electron spin resonance (ESR) studies, CuCDs significantly boost the formation of hydroxyl radicals (˙OH) and singlet oxygen (1O2), facilitating the Fenton reaction for RhB degradation. Due to the strong oxidation of ROS generated by the Fe2+ + H2O2 + CuCD system, RhB degradation may involve the cleavage of the chromophore aromatic ring and the de-ethylation process. Additionally, the toxicity of RhB degradation filtrates is assessed in vitro and in vivo. The as-prepared CuCDs may be promising catalytic agents for the enhancement of the Fenton reaction.

Cu-based MOF-derived architecture with Cu/Cu2O nanospheres anchored on porous carbon nanosheets for efficient capacitive deionization

The design of high-performance electrode materials with excellent desalination ability has always been a research goal for efficient capacitive deionization (CDI). Herein, a hybrid architecture with Cu/Cu₂O nanospheres anchored on porous carbon nanosheets (Cu/Cu₂O/C) was first synthesized by pyrolyzing a two-dimensional (2D) Cu-based metal-organic framework and then evaluated as a cathode for hybrid CDI. The as-prepared Cu/Cu₂O/C exhibits a hierarchically porous structure with a high specific surface area of 305 m² g^-1 and large pore volume of 0.55 cm³ g^-1, which is favorable to accelerating ion migration and diffusion. The porous carbon nanosheet matrix with enhanced conductivity will facilitate the Faradaic reactions of Cu/Cu₂O nanospheres during the desalination process. The Cu/Cu₂O/C hybrid architecture displays a high specific capacitance of 142.5 F g^-1 at a scan rate of 2 mV s^-1 in 1 M NaCl solution. The hybrid CDI constructed using the Cu/Cu₂O/C cathode and a commercial activated carbon anode exhibits a high desalination capacity of 16.4 mg g^-1 at an operation voltage of 1.2 V in 500 mg L^-1 NaCl solution. Additionally, the hybrid CDI exhibits a good cycling stability with 18.3% decay in the desalination capacity after 20 electrosorption-desorption cycles. Thus, the Cu/Cu₂O/C composite is expected to be a promising cathode material for hybrid CDI.

Origin of the Excellent Activity and Selectivity of a Single-Atom Copper Catalyst with Unsaturated Cu-N2 Sites via Peroxydisulfate Activation: Cu(III) as a Dominant Oxidizing Species

As an efficient active oxidant for the selective degradation of pollutants in wastewater, the high-valent copper species Cu(III) with persulfate activation has attracted substantial attention in some Cu-based catalysts. However, the systematic study of a catalyst structure and mechanism about Cu(III) with peroxydisulfate (PDS) activation is challenging owing to the coexistence of multiple Cu species and the structural symmetry of PDS. Herein, we anchored a Cu atom with two pyridinic N atoms to synthesize a single-atom Cu catalyst (Cu_SA-NC). Experimental characterizations and theoretical calculations complemented each other well because of the uniform atomic active sites. The single-atom Cu was identified as the active site, and the unsaturated Cu-N₂ configuration was more conductive to PDS activation than the saturated Cu-N₄ configuration. Benefiting from the generation of Cu(III), Cu_SA-NC exhibited an obvious selective and anti-interference performance for pollutant degradation in a complex matrix. The superior catalytic activity of Cu_SA-NC compared with that of other reported Cu-based catalysts and good durability in a continuous-flow experiment further revealed the potential of Cu_SA-NC for practical applications. This work strongly deepens the understanding of the generation of Cu(III) in a single-atom Cu catalyst with unsaturated Cu-N₂ sites under PDS activation and develops an efficient approach for actual water purification.

Removal of Organics from Landfill Leachate by Heterogeneous Fenton-like Oxidation over Copper-Based Catalyst

Landfill leachates are a mixture of high concentration organic and inorganic contaminants and need to be appropriately treated due to their toxicity and severe adverse effects on the environment. Here, we studied the treatment of landfill leachate through a heterogeneous Fenton-like oxidation process using a zirconia supported copper catalyst (Cu/ZrO2). Reaction conditions such as pH, amount of catalyst, oxidant dose, temperature, and reaction time were investigated and their effects on pollutant abatement discussed. AOS (average oxidation state) and COS (carbon oxidation state) parameters were used for the evaluation of the degree of oxidation of the process, obtaining some insight into the formation of oxidized intermediates (partial oxidation) and the total oxidation (mineralization) of the leachate during the reaction. A two-step oxidation process enhanced the overall performance of the reaction with an abatement of organic compounds of 92% confirming the promising activity of a copper-based catalyst for the treatment of liquid waste. Higher catalytic activity was achieved when the following reaction conditions were applied: 70 °C, pH 5, 200 mg/L of catalyst, 30 mL/L of H2O2 dose, and 150 min. In addition, durability of the catalyst under optimized reaction conditions was verified by repeated reaction cycles.

In Situ Partial Sulfidation for Preparing Cu/Cu2−xS Core/Shell Nanorods with Enhanced Photocatalytic Degradation

Herein, we report an approach to prepare Cu/Cu2−xS core/shell nanorods by in situ sulfidation of copper nanorods. Firstly, copper nanorods with tunable longitudinal surface plasmon resonances were synthesized by a seed-mediated method using Au nanoparticles as seeds. A convenient in situ sulfidation method was then applied to convert the outermost layer of Cu nanorods into Cu2−xS, to increase their stability and surface activity in photocatalytic applications. The thickness of Cu2−xS layer can be adjusted by controlling the amount of S source. The Cu/Cu2−xS core/shell nanorods exhibits two characteristic surface plasmon resonances located in visible and near-infrared regions, respectively. The photocatalytic performances of Cu nanorods and their derivatives were evaluated by measuring the degradation rate of methyl orange dyes. Compared with Cu nanorods, the Cu/Cu2−xS core/shell nanorods demonstrate more than a 13.6-fold enhancement in the degradation rate at 40 min. This work suggests a new direction for constructing derivative nanostructures of copper nanorods and exploring their applications.

Fe3O4@N-doped carbon derived from dye wastewater flocculates as a heterogeneous catalyst for degradation of methylene blue

The study used wastewater to mitigate pollution, wherein the catalyst was derived from MG dye wastewater flocculates produced by electrocoagulation.

Synthesis and characterization of MoxFe1−xO nanocomposites for the ultra-fast degradation of methylene blue via a Fenton-like process: a green approach

A detailed degradation study of methylene blue within 22 minutes by the green synthesis of MoxFe1−xO nanocomposites using Punica granatum peel extract.

Application of fungal copper carbonate nanoparticles as environmental catalysts: organic dye degradation and chromate removal

Biomineralization is a ubiquitous process in organisms to produce biominerals, and a wide range of metallic nanoscale minerals can be produced as a consequence of the interactions of micro-organisms with metals and minerals. Copper-bearing nanoparticles produced by biomineralization mechanisms have a variety of applications due to their remarkable catalytic efficiency, antibacterial properties and low production cost. In this study, we demonstrate the biotechnological potential of copper carbonate nanoparticles (CuNPs) synthesized using a carbonate-enriched biomass-free ureolytic fungal spent culture supernatant. The efficiency of the CuNPs in pollutant remediation was investigated using a dye (methyl red) and a toxic metal oxyanion, chromate Cr(VI). The biogenic CuNPs exhibited excellent catalytic properties in a Fenton-like reaction to degrade methyl red, and efficiently removed Cr(VI) from solution due to both adsorption and reduction of Cr(VI). X-ray photoelectron spectroscopy (XPS) identified the oxidation of reducing Cu species of the CuNPs during the reaction with Cr(VI). This work shows that urease-positive fungi can play an important role not only in the biorecovery of metals through the production of insoluble nanoscale carbonates, but also provides novel and simple strategies for the preparation of sustainable nanomineral products with catalytic properties applicable to the bioremediation of organic and metallic pollutants, solely and in mixtures.

Humification process and mechanisms investigated by Fenton-like reaction and laccase functional expression during composting

This study aims to explore the impacts of the Fenton-like reaction on hydrogen peroxide, hydroxyl radicals, humic substance (HS) formation, laccase activity and microbial communities during composting to optimize composting performances. The results indicated that the activity of laccase in the presence of the Fenton-like reaction (HC) (35.92 U/g) was significantly higher than that in the control (CP) (29.56 U/g). The content of HS in HC (151.91 g/kg) was higher than that in CP (131.73 g/kg), and amides, quinones, aliphatic compounds and aromatic compounds were promoted to form HS in HC by 2D-FTIR-COS analysis. Proteobacteria contributed most greatly to AA1 at phylum level, Pseudomonas and Sphingomonas abundances increased in HC. Redundancy analysis indicated that there was a strong positive correlation among the Fenton-like reaction, laccase and HS. Conclusively, the Fenton-like reaction improved the activity of laccase, promoted the formation of HS and enhanced the quality of compost.

Glutathione-triggered nanoplatform for chemodynamic/metal-ion therapy

The integration of metal-ion therapy and hydroxyl radical (˙OH)-mediated chemodynamic therapy (CDT) holds great potential for anticancer treatment with high specificity and efficiency. Herein, Ag nanoparticles (Ag NPs) were enveloped with Cu²⁺-based metal-organic frameworks (MOFs) and further decorated with hyaluronic acid (HA) to construct a glutathione (GSH)-activated nanoplatform (Ag@HKU-HA) for specific chemodynamic/metal-ion therapy. The obtained nanoplatform could avoid the premature leakage of Ag in circulation, but realize the release of Ag at the tumor site owing to the degradation of external MOFs triggered by Cu²⁺-reduced glutathione. The generated Cu⁺ could catalyze endogenous H₂O₂ to the highly toxic ˙OH by a Fenton-like reaction. Meanwhile, Ag NPs were oxidized to toxic Ag ions in the tumor environment. As expect, the effect of CDT combined with metal-ion therapy exhibited an excellent inhibition of tumor cells growth. Therefore, this nanoplatform may provide a promising strategy for on-demand site-specific cancer combination treatment.

Recent advances in graphitic carbon nitride as a catalyst for heterogeneous Fenton-like reactions

Graphitic carbon nitride (g-C₃N₄), an appealing metal-free polymer, has featured in extensive research in heterogeneous Fenton-like reactions owing to its advantages of stable chemical and thermal properties, ease of structural regulation and unique redox ability. However, there are still some gaps in the understanding of the mechanism and fate of g-C₃N₄ and its derivatives in heterogeneous Fenton reaction degradation of contaminants. This paper gives systematic emphasis to the development and progress of g-C₃N₄ and its composites as catalysts in heterogeneous Fenton-like reactions. The main synthesis strategies of g-C₃N₄ composites are discussed, including calcination, hydrothermal method and self-assembly method. Then, the key catalytic properties of g-C₃N₄ in Fenton-like applications, including anchoring nanoparticles, increasing specific surface area and exposed active surface sites, as well as regulating charge transfer reactions, are highlighted. Special emphasis is placed on its multifunctional role in heterogeneous Fenton-like reactions and the mechanisms involved in the activation of hydrogen peroxide, persulfates, and photocatalytic activation of persulfate. Lastly, the existing challenges and possible development direction of g-C₃N₄-coupling Fenton reactions are proposed. It is believed that this paper will bring useful information for the development of graphitic carbon nitride in both laboratory studies and practical applications.

Cu2O nanoparticles anchored on 3D bifunctional CNTs/copper foam cathode for electrocatalytic degradation of sulfamethoxazole over a broad pH range

In this paper, nanoscale Cu₂O particles was successfully anchored at defect sites of carbon nanotubes (CNTs), which doped on three-dimensional copper foam (CF) electrode (Cu₂O@CNTs/CF). The compound as cathode was synthesized via dip-coating and rapid electrodeposition followed by annealing procedure, and conducted in heterogeneous electro-Fenton (EF) system. The Cu₂O@CNTs/CF composites electrode enabled activate O₂ to generate H₂O₂ in situ and further Cu⁰/Cu₂O synergistic catalysis to produce reactive oxygen species for a broad pH-range via the heterogeneous EF process. Cu⁰ on the surface of CF also contributed to the reduction of Cu²⁺ to Cu⁺, thereby enhancing the stability of the electrode. The effects of critical parameters such as precursor-ligand dosage, the initial pH value, initial pollutant concentration and current density on the degradation of the antibiotic sulfamethoxazole (SMX) were investigated. The as-obtained electrode performed both effective catalytic activity and good reusability. Almost 100% removal rate was reached within 75 min over a broad pH range (3 to 11) during the heterogeneous EF process, with the current density of 12 mA cm^-2 and the removal efficiency of SMX decreased by only 9.0% after 8 recycle runs. Furthermore, quenching experiments indicated that hydroxyl radicals (·OH) were main species responsible for the SMX oxidation. In addition, the possible degradation pathways of SMX were proposed, which were based on nine identified intermediates. The comprehensive work is elucidated to accelerate the development of the in-situ production of H₂O₂ during the heterogeneous EF system and provide new insights to achieve high-efficiency degradation of pollutants via copper-based catalytic materials.

Visible-Light-Driven Bio-Templated Magnetic Copper Oxide Composite for Heterogeneous Photo-Fenton Degradation of Tetracycline

The development of a visible-light-driven, reusable, and long-lasting catalyst for the heterogeneous photo-Fenton process is critical for practical application in the treatment of contaminated water. This study focuses on synthesizing a visible-light-driven heterogenous bio-templated magnetic copper oxide composite (Fe3O4/CuO/C) by a two-step process of bio-templating and hydrothermal processes. The prepared composite was characterized by field emission-scanning electron microscope (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), electrical impedance spectroscopy (EIS), and vibrating sample magnetometer (VSM). The results reveal that the prepared composite retains the template’s (corn stalk’s) original porous morphology, and a substantial amount of CuO and Fe3O4 particles are loaded onto the surface of the template. The prepared Fe3O4/CuO/C composite was employed as a catalyst for heterogeneous photo-Fenton degradation of tetracycline (TC) irradiated by visible light. The prepared Fe3O4/CuO/C catalyst has high efficiency towards TC degradation within 60 min across a wide pH range irradiated by visible light, which is attributed to its readily available interfacial boundaries, which significantly improves the movement of photoexcited electrons across various components of the prepared composite. The influence of other parameters such as initial H2O2 concentration, initial concentration of TC, and catalyst dosages was also studied. In addition to high efficiency, the prepared catalyst’s performance was sustained after five cycles, and its recovery is aided by the use of an external magnetic field. This research paper highlights the development of a heterogeneous catalyst for the elimination of refractory organic compounds in wastewater.

Template-assisted Cu2O@Fe(OH)3 yolk-shell nanocages as biomimetic peroxidase: A multi-colorimetry and ratiometric fluorescence separated-type immunosensor for the detection of ochratoxin A

The convenient and effective detection of toxins is urgently demanded for food security and human health. Herein, based on the catalytic activity of mimetic peroxidase from the Cu₂O@Fe(OH)₃ yolk-shell nanocages, a dual-modal multi-colorimetric and ratiometric fluorescence immunosensor for the sensitive detection of ochratoxin A (OTA) was successfully developed. For the multi-colorimetric detection, H₂O₂ can be effectively decomposed by Cu₂O@Fe(OH)₃ to form ·OH groups, thus Au nanorods (Au NRs) can be etched to exhibit vivid color variations and localized surface plasmon resonance (LSPR) shifts. For the ratiometric fluorescence detection, o-phenylenediamine was oxidized by Cu₂O@Fe(OH)₃ to form 2,3-diaminophenazine (DAP) in the presence of H₂O₂. Interestingly, the exogenous fluorescence signal source of carbon dots can be quenched by DAP via inner filter effect, while a new emission peak at 563 nm can be discovered, forming a ratiometric fluorescence signal. Due to the independent signals and mutual confirmation, the performance of the dual-modal immunosensor for the detection of OTA was significantly improved, where a broad linear range from 1 ng/L to 10 μg/L with a detection limit of 0.56 ng/L (S/N = 3) was achieved. The sensing strategy was also used to monitor OTA in millet and lake water samples with a satisfied performance.

Cysteine enhanced degradation of monochlorobenzene in groundwater by ferrous iron/persulfate process: Impacts of matrix species and toxicity evaluation in ISCO

Monochlorobenzene (MCB), a solvent and synthetic intermediate, has been widely detected in groundwater at industrial contaminated sites. Cysteine (Cys) enhanced Fe²⁺/persulfate (Fe²⁺/Cys/PS) process with high degradation efficiency of organic pollutants has the potential for in-situ chemical oxidation of MCB. In this study, we systematically explored the impacts of common anions (CO₃^2-, HCO₃^-, SO₄^2-, NO₃^-, NO₂^-, PO₄^3-, HPO₄^2-, H₂PO₄^-, Cl^-, Br^-), cations (NH₄⁺, Mg²⁺, Al³⁺, Mn²⁺, Cu²⁺) and natural organic matter (NOM) on the degradation kinetics of MCB by the novel Fe²⁺/Cys/PS process and evaluated the ecotoxicity. The results showed that the removal of MCB in absence of matrices was enhanced by Cys due to its reduction and complexation ability. All of the anions inhibited the MCB degradation through the scavenging of SO₄^•- and HO^•, though the inhibition degree of SO₄^2-and NO₃^- was slight. Cations such as NH₄⁺, Mg²⁺ and Al³⁺ hardly interfered with the reaction. Low concentrations of Cu²⁺ and NOM promoted the MCB oxidation, but the promotion strength weakened and turned into inhibition with the increased concentration of Cu²⁺ and NOM. The toxicity assessment of the transformation products (TPs) in the presence of Cl^- and Br^- based on the quantitative structure-activity relationships model showed the potentially higher toxicity of some TPs than their parent MCB. These results indicate that groundwater matrices may interfere with the MCB oxidation process. To accurately evaluate the effects of groundwater matrices on Fe²⁺/Cys/PS process for MCB oxidation and its potential toxicity, the field tests should be carried out in the future.

Uncertainty and misinterpretation over identification, quantification and transformation of reactive species generated in catalytic oxidation processes: A review

The identification of reactive radical species using quenching and electron paramagnetic resonance (EPR) tests has attracted extensive attention, but some mistakes or misinterpretations are often present in recent literature. This review aims to clarify the corresponding issues through surveying literature, including the uncertainty about the identity of radicals in the bulk solution or adsorbed on the catalyst surface in quenching tests, selection of proper scavengers, data explanation for incomplete inhibition, the inconsistent results between quenching and EPR tests (e.g., SO₄^•- is predominant in quenching test while the signal of ^•OH predominates in EPR test), and the incorrect identification of EPR signals (e.g., SO₄^•- is identified by indiscernible or incorrect signals). In addition, this review outlines the transformation of radicals for better tracing the origin of radicals. It is anticipated that this review can help in avoiding mistakes while investigating catalytic oxidative mechanism with quenching and EPR tests.

A novel electrocatalytic filtration system with carbon nanotube supported nanoscale zerovalent copper toward ultrafast oxidation of organic pollutants

In this study, we designed an integrated electrochemical filtration system for catalytic activation of peroxymonosulfate (PMS) and degradation of aqueous microcontaminants. Composites of carbon nanotube (CNT) and nanoscale zero valence copper (nZVC) were developed to serve as high-performance catalysts, electrode and filtration media simultaneously. We observed both radical and nonradical reaction pathways, which collectively contributed to the degradation of model pollutants. Congo red was completely removed via a single-pass through the nZVCCNT filter (τ <2 s) at neutral pH. The rapid kinetics of Congo red degradation were maintained across a wide pH range (from 3.0-7.0), in complicated matrixes (e.g., tap water and lake water), and for the degradation of a wide array of persistent organic contaminants. The superior activity of nZVCCNT stems from the boosted redox cycles of Cu²⁺/Cu⁺ in the presence of an external electric field. The flow-through design remarkably outperformed the conventional batch system due to the convection-enhanced mass transport. Mechanism studies suggested that the carbonyl group and electrophilic oxygen of CNT served as electron donor and electron acceptor, respectively, to activate PMS to generate •OH and ¹O₂via one-electron transport. The electron-deficient Cu atoms are prone to react with PMS via surface hydroxyl group to produce reactive intermediates (Cu²⁺-O-O-SO₃^-), and then ¹O₂ will be generated by breaking the coordination bond of the metastable intermediate. The study will provide a green strategy for the remediation of organic pollution by a highly efficient and integrated system based on catalytic oxidation, electrochemistry, and nano-filtration techniques.

Effect of pH on the Catalytic Degradation of Rhodamine B by Synthesized CDs/g-C3N4/Cu x O Composites

The narrow pH range of Fenton oxidation restricts its applicability in water pollution treatment. In this work, a CDs/g-C₃N₄/Cu _x O composite was synthesized via a stepwise thermal polymerization method using melamine, citric acid, and Cu₂O. Adding H₂O₂ to form a heterogeneous Fenton system can degrade Rhodamine B (Rh B) under dark conditions. The synthesized composite was characterized by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and N₂ adsorption/desorption isotherms. The results showed that CDs, Cu₂O, and CuO were successfully loaded on the surface of g-C₃N₄. By evaluating the catalytic activity on Rh B degradation in the presence of H₂O₂, the optimal contents of citric acid and Cu₂O were 3 and 2.8%, respectively. In contrast to a typical Fenton reaction, which is favored in acidic conditions, the catalytic degradation of Rh B showed a strong pH-dependent relation when the pH is raised from 3 to 11, with the removal from 45 to 96%. Moreover, the recyclability of the composite was evaluated by the removal ratio of Rhodamine B (Rh B) after each cycle. Interestingly, recyclability is also favored in alkaline conditions and shows the best performance at pH 10, with the removal ratio of Rh B kept at 95% even after eight cycles. Through free radical trapping experiments and electron spin resonance (ESR) analysis, the hydroxyl radical (^•OH) and the superoxide radical (^•O₂ ^-) were identified as the main reactive species. Overall, a mechanism is proposed, explaining that the higher catalytic performance in the basic solution is due to the dominating surface reaction and favored in alkaline conditions.