Fabrication of Economical Thiol-Tethered Bifunctional Iron Composite as Potential Commercial Applicant for Arsenic Sorption Application

Enhanced capacity of thiol-functionalized sugarcane bagasse and rice husk biochars for arsenite sorption in aqueous solutions

The utilization of biowastes for producing biochar to remove potentially toxic elements from water represents an important pathway for aquatic ecosystem decontamination. Here we explored the significance of thiol-functionalization on sugarcane bagasse biochar (Th/SCB-BC) and rice husk biochar (Th/RH-BC) to enhance arsenite (As(III)) removal capacity from water and compared their efficiency with both pristine biochars (SCB-BC and RH-BC). The maximum As(III) sorption was found on Th/SCB-BC and Th/RH-BC (2.88 and 2.51 mg g-1, respectively) compared to the SCB-BC and RH-BC (1.51 and 1.40 mg g-1). Relatively, a greater percentage of As(III) removal was obtained with Th/SCB-BC and Th/RH-BC (92% and 83%, respectively) at a pH 7 compared to pristine SCB-BC and RH-BC (65% and 55%) at 6 mg L-1 initial As(III) concentration, 2 h contact time and 1 g L-1 sorbent dose. Langmuir (R2 = 0.99) isotherm and pseudo-second-order kinetic (R2 = 0.99) models provided the best fits to As(III) sorption data. Desorption experiments indicated that the regeneration ability of biochars decreased and it was in the order of Th/SCB-BC (88%) > Th/RH-BC (82%) > SCB-BC (77%) > RH-BC (69%) up to three sorption-desorption cycles. Fourier-transform infrared spectroscopy and X-ray photoelectron spectroscopy results demonstrated that the thiol (-S-H) functional groups were successfully grafted on the surface of two biochars and as such contributed to enhance As(III) removal from water. Spectroscopic data indicated that the surface functional moieties, such as -S-H, - OH, - COOH, and C = O were involved to increase As(III) sorption on thiol-functionalized biochars. This study highlights that thiol-grafting on both biochars, notably on SCB-BC, enhanced their ability to remove As(III) from water, which can be used as an effective technique for the treatment of As from drinking water.

Recent Advancements in the Field of Chitosan/Cellulose-Based Nanocomposites for Maximizing Arsenic Removal from Aqueous Environment

Water remediation, acknowledged as a significant scientific topic, guarantees the safety of drinking water, considering the diverse range of pollutants that can contaminate it. Among these pollutants, arsenic stands out as a particularly severe threat to human health, significantly compromising the overall quality of life. Despite widespread awareness of the harmful effects of arsenic poisoning, there remains a scarcity of literature on the utilization of biobased polymers as sustainable alternatives for comprehensive arsenic removal in practical concern. Cellulose and chitosan, two of the most prevalent biopolymers in nature, provide a wide range of potential benefits in cutting-edge industries, including water remediation. Nanocomposites derived from cellulose and chitosan offer numerous advantages over their larger equivalents, including high chelating properties, cost-effective production, strength, integrity during usage, and the potential to close the recycling loop. Within the sphere of arsenic remediation, this Review outlines the selection criteria for novel cellulose/chitosan-nanocomposites, such as scalability in synthesis, complete arsenic removal, and recyclability for technical significance. Especially, it aims to give an overview of the historical development of research in cellulose and chitosan, techniques for enhancing their performance, the current state of the art of the field, and the mechanisms underlying the adsorption of arsenic using cellulose/chitosan nanocomposites. Additionally, it extensively discusses the impact of shape and size on adsorbent efficiency, highlighting the crucial role of physical characteristics in optimizing performance for practical applications. Furthermore, this Review addresses regeneration, reuse, and future prospects for chitosan/cellulose-nanocomposites, which bear practical relevance. Therefore, this Review underscores the significant research gap and offers insights into refining the structural features of adsorbents to improve total inorganic arsenic removal, thereby facilitating the transition of green-material-based technology into operational use.

Electrochemical detection of arsenic (III) hazardous chemicals using cubic CsPbBr3 single crystals: Structural insights from DFT study

Long-term exposure to the highly toxic heavy metal arsenic can harm ecological systems and pose serious health risks to humans. Arsenic pollutant in water and the food chain must be addressed, and active prompt detection of As(III) is essential. The development of an effective detection method for As(III) ions is urgently needed to slow the alarming growth of arsenic pollution in the environment and safeguard the well-being of future generations. This study presents the results of our exhaustive investigation into cubic CsPbBr₃ single crystals, the glassy carbon (GC) electrode modification with CsPbBr₃ single crystals prepared by direct solvent evaporation, as well as our observations of the material's remarkable electrocatalytic properties and exceptional anti-interference sensing of As(III) ions in neutral pH media. The developed CsPbBr₃/GC is exceptionally useful for the ultra-sensitive and specific identification of arsenic in water, exhibiting a detection limit of 0.381 μmol/L, a rapid response across a defined range of 0.1-25 μmol/L, and an ultra-sensitivity of 0.296 μA/μmolL^-1. CsPbBr₃/GCE (prepared without a specific reagent) is superior to other modified electrodes used as sensors in electrocatalytic activity, detection limit, analytical sensitivity, and stability response.

Selective removal of arsenic in water: A critical review

Selective removal of arsenic (As) is the key challenge for any of As removal mechanisms as this not only increases the efficiency of removal of the main As species (neutral As(III) and As(V) hydroxyl-anions) but also allows for a significant reduction of waste as it does not co-remove other solutes. Selective removal has a number of benefits: it increases the capacity and lifetime of units while lowering the cost of the process. Therefore, a sustainable selective mitigation method should be considered concerning the economic resources available, the ability of infrastructure to sustain water treatment, and the options for reuse and/or safe disposal of treatment residuals. Several methods of selective As removal have been developed, such as precipitation, adsorption and modified iron and ligand exchange. The biggest challenge in selective removal of As is the presence of phosphate in water which is chemically comparable with As(V). There are two types of mechanisms involved with As removal: Coulombic or ion exchange; and Lewis acid-base interaction. Solution pH is one of the major controlling factors limiting removal efficiency since most of the above-mentioned methods depend on complexation through electrostatic effects. The different features of two different As species make the selective removal process more difficult, especially under natural conditions. Most of the selective As removal methods involve hydrated Fe(III) oxides through Lewis acid-base interaction. Microbiological methods have been studied recently for selective removal of As, and although there have been only a small number of studies, the method shows remarkable results and indicates positive prospects for the future.

Highly Sensitive and Selective Detection of Arsenic Using Electrogenerated Nanotextured Gold Assemblage

Arsenic is considered as a toxic heavy metal which is highly detrimental to ecological systems, and long-term exposure to it is highly dangerous to life as it can cause serious health effects. Timely detection of traces of active arsenic (As³⁺) is very crucial, and the development of simple, cost-effective methods is imperative to address the presence of arsenic in water and food chain. Herein, we present an extensive study on chemical-free electrogenerated nanotextured gold assemblage for the detection of ultralow levels of As³⁺ in water up to 0.08 ppb concentration. The gold nanotextured electrode (Au/GNE) is developed on simple Au foil via electrochemical oxidation-reduction sweeps in a metal-ion-free electrolyte solution. The ultrafine nanoscale morphological attributes of Au/GNE substrate are studied by scanning electron microscopy. Square wave anodic stripping voltammetry (ASV) response for different concentrations of arsenites is determined and directly correlated with As³⁺ detection regarding the type of electrolyte solution, deposition potential, and deposition time. The average of three standard curves are linear from 0.1 ppb up to 9 ppb (n = 15) with a linear regression coefficient R ² = 0.9932. Under optimized conditions, a superior sensitivity of 39.54 μA ppb^-1 cm^-2 is observed with a lower detection limit of 0.1 ppb (1.3 nM) (based on the visual analysis of calibration curve) and 0.08 ppb (1.06 nM) (based on the standard deviation of linear regression). Furthermore, the electrochemical Au/GNE is also applicable for arsenic detection in a complex system containing Cu²⁺, Ni²⁺, Fe²⁺, Pb²⁺, Hg²⁺, and other ions for the selective and sensitive analysis. Au/GNE substrate also possesses remarkable reproducibility and high stability for arsenic detection during repeated analysis and thus can be employed for prolonged applications and reiterating analyses. This electrochemically generated nanotextured electrode is also applicable for As³⁺ detection and analysis in a real water sample under optimized conditions. Therefore, fabrication conditions and analytical and electroanalytical performances justify that because of its low cost, easy preparation method and assembly, high reproducibility, and robustness, nanosensor Au/GNE can be scaled up for further applications.

Core-shell Fe3O4@Au nanocomposite as dual-functional optical probe and potential removal system for arsenic (III) from Water

We report for the very first time, development of a dual functional nanocomposite to perform as an optical probe as well as removal system for As(III) from ground water. Upon suitable thiolation using dithiothreitol (DTT), the Fe₃O₄(core)-Au(shell) nanocomposite (DTT-Fe₃O₄@Au) has been fabricated that can detect As(III) in aqueous solution with significantly low limit of detection and holds potential for selective removal of As(III) from water owing to its magnetic core. Due to high affinity of -SH groups for As(III), the nanoparticles undergo aggregation in the presence of As(III), resulting in a significant decrease in absorbance, yielding the limit of detection (LOD) as 0.86 ppb, which is much lower than the World Health Organisation (WHO) recommended threshold value of 10 ppb. UV-vis spectroscopy in conjunction with dynamic light scattering and electron microscopy techniques have further elaborated the detailed interaction between As(III) and DTT-Fe₃O₄@Au nanocomposite regarding their size dynamics and solution behaviour during the interaction. Moreover, ca.70% removal of As(III) from aqueous solution by DTT-Fe₃O₄@Au has been observed by ICP-MS measurement strengthening the potential of this nanocomposite as a dual-functional probe and filter.