K2CO3-Containing Composite Sorbents Based on Thermally Modified Alumina: Synthesis, Properties, and Potential Application in a Direct Air Capture/Methanation Process

Activated Carbon Fiber Felt Composites for the Direct Air Capture of Carbon Dioxide

Negative emissions technologies to mitigate climate change require innovative solutions for the direct air capture (DAC) of CO2 from the atmosphere. K2CO3 readily reacts with CO2 to form KHCO3; however, bulk K2CO3 suffers from very slow sorption kinetics. By incorporating K2CO3 into activated carbon (AC) fiber felts, the sorption kinetics were significantly improved by increasing the surface area of K2CO3 in contact with air. The AC-K2CO3 fiber composite felts are flexible, cheap, easy to manufacture, chemically stable, and show excellent DAC capacity and (de)sorption rates, with stable performance up to ten cycles. Cyclic testing was demonstrated with 4 h sorption and 0.5 h desorption intervals. The best composite felts collected an average of 478 μmol of CO2 per gram of composite during 4 h of exposure to ambient air (19 % relative humidity) that had a CO2 concentration of 400-450 ppm after regeneration at 125 °C in an air furnace. An increase in the dew point temperature from 0 to 12 °C decreased sorption performance of the composite felts by 40 %.

In Situ Fourier Transform Infrared Investigation on the Low-Level Carbon Dioxide Conversion over a Nickel/Titanium Dioxide Catalyst

Efficiently converting atmospheric carbon dioxide (CO2) is crucial for sustainable human development. In this study, we conducted systematic in situ Fourier transform infrared tests to examine how hydrogen (H2) partial pressure affects the conversion of low-level CO2 (around 400 ppm) using nickel/titanium dioxide (Ni/TiO2). Results show that increasing H2 partial pressure significantly increases surface monodentate formate species, leading to enhanced methane (CH4) production at both 250 and 400 °C. Conversely, on Ni's surface, the key species are formyls and bidentate formate at 250 °C, but these decrease significantly at 400 °C. These findings indicate that low-level CO2 is more easily converted to CH4 over Ni/TiO2 than Ni, regardless of temperature. Additionally, the strong Ni-TiO2 interaction gives Ni/TiO2 an advantage in converting low CO2 concentrations, with excellent durability even at 400 °C. This study enhances our understanding of direct CO2 conversion and aids in the development of advanced CO2 emission reduction technologies.

Mid-temperature CO2 Adsorption over Different Alkaline Sorbents Dispersed over Mesoporous Al2O3

CO2 adsorbents comprising various alkaline sorption active phases supported on mesoporous Al2O3 were prepared. The materials were tested regarding their CO2 adsorption behavior in the mid-temperature range, i.e., around 300 °C, as well as characterized via XRD, N2 physisorption, CO2-TPD and TEM. It was found that the Na2O sorption active phase supported on Al2O3 (originated following NaNO3 impregnation) led to the highest CO2 adsorption capacity due to the presence of CO2-philic interfacial Al-O--Na+ sites, and the optimum active phase load was shown to be 12 wt % (0.22 Na/Al molar ratio). Additional adsorbents were prepared by dispersing Na2O over different metal oxide supports (ZrO2, TiO2, CeO2 and SiO2), showing an inferior performance than that of Na2O/Al2O3. The kinetics and thermodynamics of CO2 adsorption were also investigated at various temperatures, showing that CO2 adsorption over the best-performing Na2O/Al2O3 material is exothermic and follows the Avrami model, while tests under varying CO2 partial pressures revealed that the Langmuir isotherm best fits the adsorption data. Lastly, Na2O/Al2O3 was tested under multiple CO2 adsorption-desorption cycles at 300 and 500 °C, respectively. The material was found to maintain its CO2 adsorption capacity with no detrimental effects on its nanostructure, porosity and surface basic sites, thereby rendering it suitable as a reversible CO2 chemisorbent or as a support for the preparation of dual-function materials.

Direct CO2 Capture from Air via Crystallization with a Trichelating Iminoguanidine Ligand

Effectively reducing the concentration of CO2 in ambient air is essential to mitigate global warming. Existing carbon capture and storage technology can only slow down the carbon emissions of large point sources but cannot treat the already accumulated CO2 in the environment. Herein, we demonstrated a simple direct CO2 capture method from air via reactive crystallization with a new trichelating iminoguanidine ligand (BTIG). It could strongly bind CO2 to form insoluble carbonate crystals that could be easily isolated. In the crystal, CO2 was transformed to CO3 2- and trapped in a dense hydrogen bonding network in terms of carbonate-water clusters. This capture process was reversible, and the BTIG ligand could be regenerated by heating the BTIG-CO2 crystal at a mild temperature, which was much lower than the decomposition temperature of CaCO3 (∼900 °C). Thermodynamic and kinetics analyses indicate that the crystallization process was exothermic with an enthalpy of -292 kJ/mol, and the decomposition energy consumption was 169 kJ per mol CO2. In addition, BTIG could also be employed for CO2 capture from flue gas with a capacity of 1.46 mol/mol, which was superior to that of most of the reported sorbents.

The Role of Alkali and Alkaline Earth Metals in the CO2 Methanation Reaction and the Combined Capture and Methanation of CO2

CO2 methanation has great potential for the better utilization of existing carbon resources via the transformation of spent carbon (CO2) to synthetic natural gas (CH4). Alkali and alkaline earth metals can serve both as promoters for methanation catalysts and as adsorbent phases upon the combined capture and methanation of CO2. Their promotion effect during methanation of carbon dioxide mainly relies on their ability to generate new basic sites on the surface of metal oxide supports that favour CO2 chemisorption and activation. However, suppression of methanation activity can also occur under certain conditions. Regarding the combined CO2 capture and methanation process, the development of novel dual-function materials (DFMs) that incorporate both adsorption and methanation functions has opened a new pathway towards the utilization of carbon dioxide emitted from point sources. The sorption and catalytically active phases on these types of materials are crucial parameters influencing their performance and stability and thus, great efforts have been undertaken for their optimization. In this review, we present some of the most recent works on the development of alkali and alkaline earth metal promoted CO2 methanation catalysts, as well as DFMs for the combined capture and methanation of CO2.