Hybrid Ce-Fe2O3/ZIF-67 Photoanode with Efficient Photoelectrochemical Water Oxidation Performance

Transformative Dynamics: Self-Assembly of Iron Oxide Hydroxide Nanorods into Iron Oxide Microcubes for Enhanced Perfluoroalkyl Substance Remediation

We report the controlled synthesis of iron oxide microcubes (IOMCs) through the self-assembly arrays of ferric oxide hydroxide nanorods (NRs). The formation of IOMCs involves a complex interplay of nucleation, self-assembly, and growth mechanisms influenced by time, thermal treatment, and surfactant dynamics. The self-assembly of vertically aligned NRs into IOMCs is controlled by dynamic magnetism properties and capping agents like cetyltrimethylammonium bromide (CTAB), whose concentration and temperature modulation dictate growth kinetics and structural uniformity. These controlled structural growths were obtained via a hydrothermal process at 120 °C at various intervals of 8, 16, 24, and 32 h in the presence of CTAB as the capping agent. In this hydrothermal method, the formation of vertically oriented NR arrays was observed without the presence of ligands, binders, harsh drying techniques, and solvent evaporation. The formation of the self-assembly of NRs to IOMCs is obtained with an increase in saturated magnetization to attain the most stable state. The synthesized IOMCs have a uniform size, quasi-shape, and excellent dispersion. Due to its excellent magnetic and catalytic properties, IOMCs were employed to remove the various emerging pollutants known as per- and polyfluorinated substances (PFAS). Various microscopic and spectroscopic techniques were employed for the characterization and interaction studies of IOMCs with various PFAS. The interaction between IOMCs and perfluoroalkyl substances (PFAS) was investigated, revealing strong adsorption tendencies facilitated by electrostatic interactions, as evidenced by UV-vis and FT-IR spectroscopic studies. Furthermore, the higher magnetic and positive surface charge of IOMCs is responsible for an effective remediation eliminating any secondary pollution with ease of recovery after the sorption interaction studies, thereby making it practically worthwhile.

Enhancing Iron(III) Oxide Photoelectrochemical Water Splitting Performance Using Defect Engineering and Heterostructure Construction

Fe2O3 is a promising semiconductor for photoelectrochemical (PEC) water decomposition. However, severe charge recombination problems limit its applications. In this study, a F-Fe2O3-x/MoS2 nanorod array photoanode was designed and prepared to facilitate charge separation. Detailed characterization and experimental results showed that F doping in Fe2O3 regulated the electronic structure to improve the conductivity of Fe2O3 and induced abundant oxygen vacancies to increase the carrier concentration and promote charge separation in bulk. In addition, the internal electric field between F-Fe2O3-x and MoS2 facilitated the qualitative transfer of the photogenerated charge, thus inhibiting their recombination. The synergistic effect between the oxygen vacancy and F-Fe2O3-x/MoS2 heterojunction significantly enhanced the PEC performance of Fe2O3. This study provides a universal strategy for designing other photoanode materials with high-efficiency charge separation.

Rational Design of CoOOH/α-Fe2O3/SnO2 for Boosted Photoelectrochemical Water Oxidation: The Roles of Underneath SnO2 and Surface CoOOH

Hematite (α-Fe2O3) photoanode is a promising candidate for efficient PEC solar energy conversion. However, the serious charge recombination together with the sluggish water oxidation kinetics of α-Fe2O3 still restricts its practical application in renewable energy systems. In this work, a CoOOH/α-Fe2O3/SnO2 photoanode was fabricated, in which the ultrathin SnO2 underlayer is deposited on the fluorine-doped tin oxide (FTO) substrate, α-Fe2O3 nanorod array is the absorber layer, and CoOOH nanosheet is the surface modifier, respectively. The resulting CoOOH/α-Fe2O3/SnO2 exhibited excellent PEC water splitting with a high photocurrent density of 2.05 mA cm-2 at 1.23 V vs RHE in the alkaline electrolyte, which is ca. 3.25 times that of bare α-Fe2O3. PEC characterizations demonstrated that SnO2 not only could block hole transport from α-Fe2O3 to FTO substrate but also could efficiently enhance the light-harvesting property and reduce the surface states by controlling the growth process of α-Fe2O3, while the CoOOH overlayer as cocatalysts could rapidly extract the photogenerated holes and provide catalytic active sites for water oxidation. Benefiting from the synergistic effects of SnO2 and CoOOH, the efficiency of the charge recombination and the overpotential for water oxidation of α-Fe2O3 are obviously decreased, resulting in the boosted PEC efficiency for water oxidation. The rational design and simple fabrication strategy display great potentials to be used for other PEC systems with excellent efficiency.

Metal-organic frameworks (MOFs) for photoelectrocatalytic (PEC) reducing carbon dioxide (CO2) to hydrocarbon fuels

MOF-based photoelectrocatalysis (PEC) using CO2 as an electron donor offers a green, clean, and extensible way to make hydrocarbon fuels under more tolerant conditions. Herein, basic principles of PEC reduction of CO2 and the preparation methods and characterization techniques of MOF-based materials are summarized. Furthermore, three applications of MOFs for improving the photoelectrocatalytic performance of CO2 reduction are described: (i) as photoelectrode alone; (ii) as a co-catalyst of semiconductor photoelectrode or as a substrate for loading dyes, quantum dots, and other co-catalysts; (iii) as one of the components of heterojunction structure. Challenges and future wave surrounding the development of robust PEC CO2 systems based on MOF materials are also discussed briefly.

NiFe-LDH-Decorated Ti-Doped Hematite Photoanode for Enhancing Solar Water-Splitting Efficiency

Ti-doped α-Fe2O3 nanorods were prepared by a facile hydrothermal method, followed by a NiFe-LDH catalyst that was electrodeposited on the doped α-Fe2O3 nanorods to structure an integrating photoanode Ti:Fe2O3/NiFe-LDH for improving solar PEC water-splitting efficiency. The structure and properties of electrode materials were characterized and the PEC properties of photoanodes were measured. The results show that the photocurrent density of the photoanode enhances 11.25 times at 1.23 V (vs RHE) and the IPCE value enhances 4.10 times at 420 nm compared with pristine α-Fe2O3. The enhancement is attributed to the separating of photogenerated electron-hole, the increase of carrier density, and the acceleration of the carrier transfer rate due to the dual action of doping and catalysis.

Synergistic Coupling of Charge Extraction and Sinking in Cu5FeS4/Ni3S2@NF for Photoassisted Electrocatalytic Oxygen Evolution

Exploring low-cost and high-performance oxygen evolution reaction (OER) catalysts has attracted great attention due to their crucial role in water splitting. Here, a bifunctional Cu5FeS4/Ni3S2@NF catalyst was in situ formed on a nickel (Ni) foam toward efficient photoassisted electrocatalytic (P-EC) OER, which displays an ultralow overpotential of 260 mV at 30 mA cm-2 in alkaline solution, outperforming most previously reported Ni-based catalysts. It also shows great potential in degradation of antibiotics as an alternative anode reaction to OER owing to the prompt transfer of photogenerated holes. The photocurrent test and transient photovoltage spectroscopy indicate that the synergistic coupling of charge extraction and sinking effects in Cu5FeS4 and Ni3S2 is critical for boosting the OER activity via photoassistance. Electrochemical active surface area and electrochemical impedance spectroscopy tests further prove that the photogenerated electromotive force can effectively compensate the overpotential of OER. This work not only provides a good guidance for integrating photocatalysis and electrocatalysis, but also indicates the key role of synergistic extraction and utilization of photogenerated charge carriers in P-EC.