Heterometallic Alkaline Earth-Lanthanide Ba(II)-La(III) Microporous Metal-Organic Framework as Bifunctional Luminescent Probes of Al(3+) and MnO4(.)

MOFs as versatile scaffolds to explore environmental contaminants based on their luminescence bustle

Metal-Organic Frameworks (MOFs) with luminescent properties hold significant promise for environmental remediation. This review critically examines recent research on these materials design, synthesis, and applications, mainly focusing on their role in combating environmental pollutants. Through a comprehensive analysis of metal ions, ligands, and framework compositions, the review discusses the importance of tailored design and synthesis approaches in achieving desired luminescent characteristics. Key findings highlight the effectiveness of luminous MOFs as fluorescent sensors for a wide range of contaminants, including heavy metals, reactive species, antibiotics, and explosives. Considering all this, the review discusses future research needs and opportunities in the field of luminous MOFs. It emphasizes the importance of developing multifunctional materials, refining design methodologies, exploring sensing mechanisms, and ensuring environmental compatibility, scalability, and affordability. By providing insights into the current state of research and outlining future directions, this review is a valuable resource for researchers seeking to address environmental challenges using MOF-based solutions.

Hierarchical 2D honeycomb-like network from barium-seamed nanocapsules

We report on a two-dimensional hexagonal "honeycomb" network comprising barium-seamed metal-organic nanocapsules involving a hexameric assembly of pyrogallol[4]arene ligands. The incorporated barium ions act as spacers to generate a solvent-accessible void, hierarchical self-assembly having an individual void volume near 13 000 Å3. This work illustrates the surprising chemistry that remains to be discovered by integrating large or classically non-reactive metal ions within supramolecular assemblies, networks, and organic nanocapsules.

Selective and Rapid Detection of 4-Nitrophenol in River and Treated Industrial Wastewater by a Luminescent Lanthanide Metal-Organic Framework Sensor

Phenolic organic compounds are widely used industrial chemicals that exist extensively in the environment and have a significant impact on human health. 4-Nitrophenol (4-NP) is a typical phenolic organic compound found in aqueous environments. Efficient detection of 4-NP in wastewater is highly challenging due to the complexity of testing environmental samples. Herein, a luminescent lanthanide metal-organic framework (MOF) sensor based on the Eu3+ ion {[Eu(HL)(L)(H2O)]·2H2O}n (EuMOF; H2L = 5-(4H-1,2,4-triazol-4-yl)benzene-1,3-dicarboxylic acid) was successfully synthesized for efficient 4-NP detection in wastewater. Fluorescence sensing experiments revealed that 4-NP could greatly quench the EuMOF fluorescence. Subsequently, EuMOF was applied to 4-NP detection in distilled water, tap water, river water, and treated industrial wastewater, exhibiting high sensitivity, a fast response within 30 s, high selectivity, excellent reusability, and a low detection limit. Finally, the fluorescence quenching mechanism was explored and attributed to competitive absorption of irradiated light between 4-NP and the ligand.

Construction of High Quantum Yield Lanthanide Luminescent MOF Platform by In Situ Doping and Its Temperature Sensing Performance

Lanthanide luminescent MOF materials show excellent luminescent properties. However, obtaining lanthanide luminescent MOFs with high quantum yield is a challenging research. A novel bismuth-based metal-organic framework [Bi(SIP)(DMF)₂] was constructed by solvothermal method, utilizing 5-sulfoisophthalic acid monosodium salt (NaH₂SIP) and Bi(NO₃)₃·5H₂O. Thereafter, doped MOFs (Ln-Bi-SIP, Ln = Eu, Tb, Sm, Dy, Yb, Nd, Er) with different luminescent properties have been obtained by in situ doping with different lanthanide metal ions, among which Eu-Bi-SIP, Tb-Bi-SIP, Sm-Bi-SIP, and Dy-Bi-SIP have high quantum yield. What is special is that the doping amount of Ln³⁺ ions is very low, and the doped MOF can achieve high luminescence quantum yields. EuTb-Bi-SIP obtained by Eu³⁺/Tb³⁺ codoping and Dy-Bi-SIP exhibit good temperature sensing performance over a wide temperature range with the maximum sensitivity S_r of 1.6%·K^-1 (433 K) and 2.6%·K^-1, respectively (133 K), while the cycling experiments also show good repeatability in the assay temperature range. Finally, considering the practical application value, EuTb-Bi-SIP was blended with an organic polymer poly(methyl methacrylate) (PMMA) to produce a thin film, which shows different color changes at different temperatures.

Highly pH-Responsive Sensor Based on a EuIII Metal-Organic Framework with Efficient Recognition of Arginine and Lysine in Living Cells

A lanthanide-based three-dimensional metal-organic framework with excellent water, acid/base, and solvent stability, namely {[(CH3)2NH2]0.7[Eu2(BTDBA)1.5(lac)0.7(H2O)2]·2H2O·2DMF·2CH3CN}n (JXUST-29, H4BTDBA = 4',4‴-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid), Hlac = lactic acid), has been synthesized and characterized. Since the N atoms of the thiadiazole group will not coordinate with lanthanide ions, JXUST-29 has a free basic N-site accessible to small H+ ions, which allows it to be used as a promising pH fluorescence sensor. Interestingly, the luminescence signal was significantly enhanced, with an approximately 54-fold enhancement in the emission intensity when the pH value was increased from 2 to 5, which is the typical behavior of pH probes. In addition, JXUST-29 can also be used as a luminescence sensor to detect l-arginine (Arg) and l-lysine (Lys) in an aqueous solution through fluorescence enhancement and the blue-shift effect. The detection limits were 0.023 and 0.077 μM, respectively. In addition, JXUST-29-based devices were designed and developed to facilitate detection. Importantly, JXUST-29 is also capable of detecting and sensing Arg and Lys in living cells.

Determination of trace potassium permanganate in tap water by solid phase extraction combined with spectrophotometry

A simple solid phase extraction (SPE) coupled with spectrophotometric method was developed for determination of trace permanganate (MnO₄ ^-) in water. Commercial reagent polyamined-6 powder was used as SPE stationary phase to retain MnO₄ ^- which is based on the fact that MnO₄ ^- can be adsorbed on polyamide 6 (PA-6) sorbent as water samples flow through the SPE cartridge. 3,3',5,5'-tetramethylbenzidine (TMB) were used both as eluent solution and chromogenic agent to convert the adsorbed MnO₄ ^- into Mn²⁺ and generate blue oxidized product with high molar absorptivity. Quantification of MnO₄ ^- could be obtained by spectrophotometric detection of the resulting solution flow out of the SPE cartridge. The extraction and detection variables was optimized to maximize the absorbance of the TMB oxidized product. Under optimized conditions, this method provided linear dynamic ranges of 0.01-1 μmol L^-1 for MnO₄ ^- with preconcentration of 100 mL water sample. The limits of detection (3S_b/m) of this method in deionized water were calculated to be 5.1 nM, and the relative standard deviations were determined to be 3.2% (C = 0.1 μmol L^-1, n = 5). This method has been applied to the determination of MnO₄ ^- in spiked tap waters and satisfactory recovery was obtained.

Metal-organic frameworks: A promising option for the diagnosis and treatment of Alzheimer's disease

Beta-amyloid (Aβ) peptide is one of the main characteristic biomarkers of Alzheimer's disease (AD). Previous clinical investigations have proposed that unusual concentrations of this biomarker in cerebrospinal fluid, blood, and brain tissue are closely associated with the AD progression. Therefore, the critical point of early diagnosis, prevention, and treatment of AD is to monitor the levels of Aβ. In view of the potential of metal-organic frameworks (MOFs) for diagnosing and treating the AD, much attention has been focused in recent years. This review discusses the latest advances in the applications of MOFs for the early diagnosis of AD via fluorescence and electrochemiluminescence (ECL) detection of AD biomarkers, fluorescence detection of the main metal ions in the brain (Zn²⁺, Cu²⁺, Mn²⁺, Fe³⁺, and Al³⁺) in addition to magnetic resonance imaging (MRI) of the Aβ plaques. The current challenges and future strategies for translating the in vitro applications of MOFs into in vivo diagnosis of the AD are discussed.

Fluorescence-Responsive Detection of Ag(I), Al(III), and Cr(III) Ions Using Cd(II) Based Pillared-Layer Frameworks

Two Cd(II) based coordination polymers, {Cd₃(btc)₂(BTD-bpy)₂]∙1.5MeOH∙4H₂O}_n (1) and [Cd₂(1,4-ndc)₂(BTD-bpy)₂]_n (2), where BTD-bpy = bis(pyridin-4-yl)benzothiadiazole, btc = benzene-1,3,5-tricarboxylate, and 1,4-ndc = naphthalene-1,4-dicarboxylate, were hydro(solvo)thermally synthesized. Compound 1 has a three-dimensional non-interpenetrating pillared-bilayer open framework with sufficient free voids of 25.1%, which is simplified to show a topological (4,6,8)-connected net with the point symbol of (3²4²56)(3⁴4⁴5⁴6²8)(3⁴4²6¹⁹7²8). Compound 2 has a three-dimensional two-fold interpenetrating bipillared-layer condense framework regarded as a 6-connected primitive cubic (pcu) net topology. Compounds 1 and 2 both exhibited good water stability and high thermal stability approaching 350 °C. Upon excitation, compounds 1 and 2 both emitted blue light fluorescence at 471 and 479 nm, respectively, in solid state and at 457 and 446 nm, respectively, in the suspension phase of H₂O. Moreover, compounds 1 and 2 in the suspension phase of H₂O both exhibited a fluorescence quenching effect in sensing Ag⁺, attributed to framework collapse, and a fluorescence enhancement response in sensing Al³⁺ and Cr³⁺, ascribed to weak ion-framework interactions, with high selectivity and sensitivity and low detection limit.

Multi-responsive luminescent sensitivities of two pillared-layer frameworks towards nitroaromatics, Cr2O72-, MnO4- and PO43- anions

Combining Zn(II) with two dicarboxylic acids of different length and functional groups results in the 2D metal-carboxylate layer of different size and shape, which are further connected by the same bis-pyridyl-bis-amide pillar to afford two 4-fold and 3-fold interpenetrating pillared-layer networks (1 and 2). Luminescent properties of 1 and 2 have been systematically investigated and demonstrated multi-responsive luminescent sensitivities. 1 can be used for highly sensitive detection of nitroaromatics. In particular, 2 can be used turn-off sensing towards Cr₂O₇^2- and MnO₄^- anions as well as turn-on sensing towards PO₄^3- anion in aqueous solution with high sensitivity and remarkable recyclability. The sensing mechanism is also discussed.

Highly Luminescent Nucleoside-Based N, P-Doped Carbon Dots for Sensitive Detection of Ions and Bioimaging

The efficient detection of Fe3+ and MnO4− in a water environment is very important and challenging due to their harmful effects on the health of humanity and environmental systems. Good biocompatibility, sensitivity, selectivity, and superior photophysical properties were important attributes of carbon dot-based CDs sensors for sensing applications. In this work, we synthesized N, P-co-doped carbon dots (N/P CDs) with guanosine 5′-monophosphate (GMP) as a green carbon source, with high fluorescence quantum yield in water (QY, 53.72%). First, the luminescent N/P CDs showed a three-state “on-off-on” fluorescence response upon the sequential addition of Fe3+ and F−, with a low detection limit of 12 nM for Fe3+ and 8.5 nM for F−, respectively. Second, the N/P CDs also exhibited desirable selectivity and sensitivity for toxic MnO4− detection with the limit of detection of 18.2 nM, through a turn-off mechanism. Moreover, the luminescent N/P CDs successfully monitored the aforementioned ions in environmental water samples and in Escherichia coli.

Improvement of the fluorescent sensing biomarker 3-nitrotyrosine for a new luminescent coordination polymer by size regulation

A new 3D luminescent coordination polymer (LCP) 1 was synthesized for detecting biomarker 3-nitrotyrosine. By adjusting the reaction conditions, Nano-LCP 1 was synthesized, which has a more lower detection limit compared with LCP 1.

Two coordination polymers as multi-responsive luminescent sensors for the detection of UO22+, Cr(vi), and the NFT antibiotic

Two CPs have been synthesized using solvothermal method and can act as multi-responsive luminescent probe to detect UO22+ cation, Cr2O72−/CrO42− anions, and nitrofuran antibiotic in aqueous media with high sensitivity and selectivity.

Two porous three-dimensional (3D) metal–organic frameworks based on diverse metal clusters: selective sensing of Fe3+ and Cr2O72−

Using a rigid 3,5-di(2′,5′-dicarboxylphenyl)benzoic acid, two porous 3D MOFs have been synthesized and characterized, and the luminescent properties have been studied.

A series of bis-pyridyl-bis-amide-modulated metal–organic frameworks: formation, transformation and selectivity for the efficient detection of multiple analytes

A series of LMOFs have been structurally characterized, which display a remarkable fluorescence behavior and can be used as outstanding candidates in the selective sensing of multiple analytes with low limits of detection.

Turning waste into wealth: nitrogen-doped carbon quantum dots derived from fruits wastes for sensing

Hydrothermal treatment of m-phenylenediamine and grape seed powder has been adopted to synthesize nitrogen-doped carbon quantum dots (N-CQDs). The prepared N-CQDs possessed outstanding optical properties and high quantum yield. Based on the combined effect of static quenching effect and inner filter effect of permanganate (MnO₄ ^- ) to N-CQDs and the redox reaction that occurred between MnO₄ ^- and l-ascorbic acid (l-AA), an 'off-on' fluorescence strategy with N-CQDs has been proposed for the detection of MnO₄ ^- and l-AA. The proposed fluorescent probe was fast, sensitive and selective to MnO₄ ^- and l-AA under mild conditions. In addition, the satisfactory results of the proposed strategy for the detection of MnO₄ ^- and l-AA in real samples indicated its practicability.

Porous Lanthanide Metal-Organic Frameworks Using Pyridine-2,4-dicarboxylic Acid as a Linker: Structure, Gas Adsorption, and Luminescence Studies

Two types of new lanthanide coordination networks, [Ln₃(pdc)₄(Hpdc)(H₂O)₃]·8H₂O [H₂pdc = pyridine-2,4-dicarboxylic acid; Ln = Ce (1), Pr (2), Sm (3), Eu (4); type A) and [Tb₅(pdc)₄(Hpdc)]·3H₂O (type B), have been synthesized using a hydrothermal synthetic method. The former type A compound has an unfamiliar architecture, even basically comprised of primitive cubic (pcu) topology, and demonstrate porous gas adsorption behavior, giving several hundreds of square meters per gram surface areas after evacuation of the water molecules, while the latter type B compound does not show any porous properties. Most interestingly, the solvothermal synthetic method using N,N-dimethylformamide (DMF) as a solvent gives compounds that crystallize in a structure analogous to that of type A for Ln = La-Ho, probably formulated as [Ln₃(pdc)₄(Hpdc)·(DMF)_m]·nDMF. These compounds also exhibit large surface areas after evacuation of the DMF molecules and also moderate amounts of hydrogen gas uptake at 77 K. The luminescence properties were investigated for Eu and Tb analogues at elevated temperatures, at which an unusual increase in the emission intensity was observed upon the release of solvents, and discussed based on their porous structure.

Anion-Dependent Structure and Luminescence Diversity in ZnII-LnIII Heterometallic Architectures Supported by a Salicylamide-Imine Ligand

To advance the structural development and fully explore the application potential, it is highly desirable but challenging to elucidate the relationship between the structures and properties of Zn^II-Ln^III heterometallic species. Herein, three types of Zn^II-Ln^III heterometallic compounds (Ln^III = Gd^III, Tb^III) formulated as [Zn₁₆Ln₄L₁₂(μ₃-O)₄(NO₃)₁₂]·8CH₃CN (ZnLn-1), [Zn₂Ln₂L₂(NO₃)₆(H₂O)₂]·3CH₃CN (ZnLn-2), and [Zn₄Ln₂L₈(OAc)₁₂]·xCH₃CN (ZnLn-3: for Ln = Gd, x = 5; for Ln = Tb, x = 4) were dictated by common inorganic anions, NO₃^- and OAc^-, with the aid of the multidentate ligand H₂L with propane as the central skeleton and 3-methoxysalicylamide and 3-methoxysalicylaldimine as terminal groups. ZnLn-1 features cubic cages with four {Zn₄L₃} tetrahedral subunits and four Ln³⁺ centers positioned at the eight vertices alternately when NO₃^- was introduced into the reaction system exclusively. An attempt to replace NO₃^- in ZnLn-1 with OAc^- partially led to the formation of {Zn₂Ln₂L₂} heterometallic wheels. Meanwhile, ZnLn-3 featuring double-hairpin-like {Zn₄Ln₂L₄} hemicycles that are orthogonal to each other assisted by intermolecular hydrogen bonds was constructed when NO₃^- in ZnLn-1 was completely replaced by OAc^-. Their structural integrity in solution were ascertained by both emission and ¹H NMR spectroscopy. Ascribed to the different Zn²⁺-containing antenna, ZnTb-2 possesses a relatively strong emission characteristic of Tb³⁺; ZnTb-1 has moderate Tb³⁺ luminescence, yet an absence of Tb³⁺ emission is found in ZnTb-3. Such an emission difference could be mainly attributed to the antenna effect directed by distinct structural characteristics induced by anions. The anion-dictated self-assembly strategy presented herein not only offers a facile approach to regulate the coordination mode of H₂L to such an extent to obtain diverse structures of Zn^II-Ln^III heterometallic species but also provides an understanding of how common inorganic anions tune coordination-driven self-assemblies as well as the subsequent luminescence properties.

Tetraphenylpyrazine-Based Manganese Metal-Organic Framework as a Multifunctional Sensor for Cu2+, Cr3+, MnO4-, and 2,4,6-Trinitrophenol and the Construction of a Molecular Logical Gate

A tetraimidazole-decorating tetraphenylpyrazine has been designed and utilized for the fabrication of a novel metal-organic framework (MOF), denoted as {Mn(Tipp)(A)₂}_n·2H₂O (TippMn, where Tipp = 2,3,5,6-tetrakis[4-[(1H-imidazol-1-yl)methyl]phenyl]pyrazine and A = deprotonation of 1,4-naphthalenedicarboxylic acid), through hydrothermal synthesis. Structural analysis reveals that TippMn possesses a 2-fold-interpenetrated 4,8-connected three-dimensional (3D) network with an unprecedented {4¹⁶·6¹²}{4⁴·6²} topology. Fluorescent spectral investigations indicate that TippMn shows discriminative fluorescence when treated by Cr³⁺ and Cu²⁺, giving an INHIBIT logical gate performance. Meanwhile, TippMn can be further used as a sensor for MnO₄^- and 2,4,6-trinitrophenol (TNP) by fluorescence quenching. Notably, the sensing processes toward Cu²⁺, Cr³⁺, MnO₄^-, and TNP are labeled with high selectivity and sensitivity, quick response, and good recyclability. It is anticipated that this MOF-based versatile sensor could shed light on the exploration of MOFs for fluorescent sensors, optical switches, etc.

Ultrasensitive electrochemical molecularly imprinted sensor based on AuE/Ag-MOF@MC for determination of hemoglobin using response surface methodology

Considering the importance of determining the levels of hemoglobin (Hb) as a vital protein in red blood cells, in this work a highly sensitive electrochemical sensor was developed based on a gold electrode (AuE) modified with Ag metal-organic framework mesoporous carbon (Ag-MOF@MC) and molecularly imprinted polymers (MIPs). To that end, the MIP layer was formed on the Ag-MOF@MC by implanting Hb as the pattern molecule during the polymerization. The modified electrode was designed using electrochemical approaches including differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV). Using a response level experimental design method, the most important parameters affecting the reaction of the sensing system including pH, incubation time, and scanning rate were optimized. Following the same route, the Hb concentration, pH, temperature, and elution times were optimized to prepare the imprinted polymer layer on the Ag-MOF@MC surface. By exploiting DPV techniques based on the optimal parameters, the electrochemical response of the AuE/Ag-MOF@MC-MIPs for Hb determination was recorded in a wide linear dynamic range (LDR) of 0.2 pM to 1000 nM, with a limit of detection (LOD) of 0.09 pM. Moreover, the Ag-MOF@MC-MIP sensing system showed good stability, high selectivity, and acceptable reproducibility for Hb determination. The sensing system was successfully applied for Hb determination in real blood samples, and the results were compared with those of the standard methods for Hb determination. Acceptable recovery (99.0%) and RDS% (4.6%) confirmed the applicability and reliability of the designed Hb sensing system.

Coordination networks for the recognition of oxo-anions

Crystalline coordination networks with an infinite extended framework, also known as coordination polymers (CPs) or metal-organic frameworks (MOFs), have attracted significant attention owing to their tremendous performance in an extensive range of applications. The unique structural features and high stability of coordination networks are responsible for their utilization and potential in diverse fields especially in the area of sensing using luminescent CPs/MOFs. The recognition of toxic oxo-anions present in water is a crucial and first step towards environmental remediation, mainly in the case of water pollution. Accordingly, the utilization of luminescent coordination networks has received significant interest, particularly for the recognition of various toxic oxo-anions, which are considered a threat to aquatic life and the environment. In this frontier article, we summarize recent reports on luminescent CPs/MOFs, their utilization for the sensing of oxo-anions and the chemistry of the interaction of oxo-anions with CPs/MOFs, which is responsible for tuning their optical signals.

A Europium-Organic Framework Sensing Material for 2-Aminoacetophenone, a Bacterial Biomarker in Water

2-Aminoacetophenone (2-AA) is a metabolite produced in large quantities by the pathogenic bacteria Pseudomonas aeruginosa (PA), which is a biomarker for PA in water. State-of-the-art analytical techniques to detect PA usually require expensive instruments and a long analysis time which are not suitable for real-time water quality monitoring, especially for high-quality drinking water. Herein, we reported the application of a europium metal-organic framework (Eu-MOF) as a luminescent sensing material, which provides a facile, environmentally friendly and low-cost way for the fast detection of PA in water. Eu-MOF shows a high sensitivity toward 2-AA with a K_SV value of 3.563 × 10⁴ M^-1, rapid luminescence response in 12 s and high-selectivity and anti-interference ability with the existence of common detection indexes in drinking water owing to the good match of the energy levels of Eu-MOF and 2-AA. A systematical optimization of the sensing conditions to enhance the sensing function of Eu-MOF for 2-AA was discussed in detail, to give fundamentals for the rational design of MOF-based sensing materials.

Response of a Zn(II)-based metal-organic coordination polymer towards trivalent metal ions (Al3+, Fe3+ and Cr3+) probed by spectroscopic methods

A new zinc-based two-dimensional coordination polymer, [Zn(5-AIP)(Ald-4)]·H2O (5-AIP = 5-amino isophthalate, Ald-4 = aldrithiol-4), 1, has been synthesized at room temperature by the layer diffusion technique. Single-crystal X-ray diffraction analysis of 1 showed a two-dimensional bilayer structure. An aqueous suspension of 1 upon excitation at 300 nm displayed an intense blue emission at 403 nm. The luminescence spectra were interestingly responsive and selective to Al3+, Cr3+ and Fe3+ ions even in the presence of other interfering ions. The calculated detection limits for Al3+, Cr3+ and Fe3+ were 0.35 μM ([triple bond, length as m-dash]8.43 ppb), 0.46 μM ([triple bond, length as m-dash]22.6 ppb) and 0.30 μM ([triple bond, length as m-dash]15.85 ppb), respectively. Notably, with the cumulative addition of Al3+ ions, the luminescence intensity at 403 nm decreased steadily with a gradual red shift up to 427 nm. Afterward, this red shifted peak showed a turn-on effect upon further addition of Al3+ ions. On the other hand, for Cr3+ and Fe3+ ions, there was only drastic luminescence quenching and a large red shift up to 434 nm. This indicated the formation of a complex between 1 and these metal ions, which was also supported by the UV-Visible absorption spectra of 1 that showed the appearance of a new band at 280 nm in the presence of these three metal ions. The FTIR spectra revealed that these ions interacted with the carboxylate oxygen atom of 5-AIP and the nitrogen atom of the Ald-4 ligand in the structure. The luminescence lifetime decay analysis manifested that a charge-transfer type complex was formed between 1 and Cr3+ and Fe3+ ions that resulted in huge luminescence quenching due to the efficient charge transfer involving the vacant d-orbitals, whereas for Al3+ ions having no vacant d-orbital, turn-on of luminescence occurred because of the increased rigidity of 1 upon complexation.

Highly selective and sensitive chemosensor for Al(III) based on isoquinoline Schiff base

As a colorimetric and fluorescent turn-on sensor to Al³⁺, N'-(2-hydroxybenzylidene)isoquinoline-3-carbohydrazide (HL) has been easily synthesized. The fluorescence intensity increases by 273 times in the presence of Al³⁺ at 458 nm. Meanwhile, the experiment data indicate that the limit of detection for Al³⁺ is 1.11 × 10^-9 M. Remarkably, the blue fluorescence signal of HL-Al³⁺ could be specially observed by the naked eye under UV light and is significantly different from those of other metal ions. Fluorescence switch based on the control of Al³⁺ and EDTA proved HL could act as a reversible chemosensor. According to ESI-MS result and the Job's plots, the 2:1 coordination complex formed by HL and Al³⁺ could be produced. Density functional theory calculations were performed to illustrate the structures of HL and complex. The cell imaging experiment indicates that HL can be applied for monitoring intracellular Al³⁺ levels in cells.

Uranyl Organic Framework as a Highly Selective and Sensitive Turn-on and Turn-off Luminescent Sensor for Dual Functional Detection Arginine and MnO4. Inorg Chem 2020;59:5004-5017. [PMID: 32207299 DOI: 10.1021/acs.inorgchem.0c00236]

Five new uranyl coordination polymers were prepared by the hydrothermal method based on 5-nitroisophthalic acid (H₂nip) as (UO₂)(nip)(2,2'-bpy) (1), (H₂4,4'-bpy)·[(UO₂)₃(nip)₄]·(4,4'-bpy) (2), (H₂bpe)·[(UO₂)_0.5(nip)] (3), (H₂ bpp)·[(UO₂)₂-(nip)₃]·H₂O (4), and (H₂tmp)·[(UO₂)(nip)₂](5) [2,2'-bpy = 2,2'-bipyridine, 4,4'-bpy = 4,4'-bipyridine, bpe = 4,4'-vinylenedipyridine, bpp = 4,4' -trimethylenedipyridine, tmp = tetramethylpyrazine]. All of these synthesized complexes have been characterized by single crystal and powder X-ray diffraction, IR spectra, thermogravimetric analysis, elemental analysis, and luminescent properties. In particular, it is found that compounds 1 and 4 can be used as a luminescent sensor to efficiently detect arginine in aqueous solution by means of "turn-on"; the detection limits were 1.06 × 10^-6 and 6.42 × 10^-6 mol/L, respectively. Moreover, 4 can also be used as a bifunctional sensor for selective sensing of MnO₄^- anion by "turn-off". The detection limit of MnO₄^- in water was 1.79 × 10^-6 mol/L; the K_sv was 1.88 × 10⁴. The sensing effect of arginine in simulated grape juice samples and MnO₄^- in simulated river water samples was also investigated by this sensing system with high recovery. In addition, the possible mechanism of sensing arginine and MnO₄^- in the aqueous solution was discussed.

Ionic Self-Assembled Luminescent Nanospheres from Cationic Polyelectrolyte and Eu-Containing Polyoxometalate

Using the ionic self-assembly (ISA) strategy to combine Eu-containing polyoxometalates (Eu-POMs) and organic molecules mainly through noncovalent electrostatic interactions can protect Eu-POMs from solvent quenching of luminescence and enhance their processability. For this reason, a cationic polyelectrolyte, branched polyethyleneimine (PEI), and a Eu-POM, Na₉(EuW₁₀O₃₆)·32H₂O (EuW₁₀), were used here to construct luminescence-enhanced spherical aggregates with diameters ranging from 50 to 200 nm. At a fixed concentration of EuW₁₀, the phase behavior and luminescence properties of the mixture could be modulated by the PEI concentration. Such ISA-induced aggregates could effectively shield water molecules and result in better photophysical properties. Compared to bare EuW₁₀, the absolute quantum yield and lifetime of luminescence for aggregates increased 10 and 5 times, respectively. Meanwhile, the sensitivity of the EuW₁₀ coordination structure to the environment made it possible for obtained aggregates being used to detect either copper cations or permanganate anions due to their strong specific quenching effects to luminescence. Such a new type of luminescent soft material not only provided a reference for exploring the luminescence enhancement mechanism of lanthanide through self-assembly in aqueous solution but also exhibited potential in detection by luminescence analysis.