Effect of Morphology and Concentration on Crossover between Antioxidant and Pro-oxidant Activity of MgO Nanostructures

The utility of Hibiscus sabdariffa L. to prepare metal oxides NPs for clinical application on osteoporosis supported by theoretical study

Green synthesis of metal oxides as a treatment for bone diseases is still exploring. Herein, MgO and Fe2O3 NPs were prepared from the extract of Hibiscus sabdariffa L. to study their effect on vit D3, Ca+2, and alkaline phosphatase enzyme ALP associated with osteoporosis. Computational chemistry was utilized to gain insight into the possible interactions. These oxides were characterized by X-ray diffraction, SEM, FTIR, and AFM. Results revealed that green synthesis of MgO and Fe2O3 NPs was successful with abundant. MgO NPs were in vitro applied on osteoporosis patients (n = 35) and showed a significant elevation of vit D3 and Ca+2 (0.0001 > p < 0.001) levels, compared to healthy volunteers (n = 25). Thus, Hibiscus sabdariffa L. is a good candidate to prepare MgO NPs, with a promising enhancing effect on vit D3 and Ca+2 in osteoporosis. In addition, interactions of Fe2O3 and MgO NPs with ALP were determined by molecular docking study.

Tailoring functional two-dimensional nanohybrids: A comprehensive approach for enhancing photocatalytic remediation

Photocatalysis is gaining prominence as a viable alternative to conventional biohazard treatment technologies. Two-dimensional (2D) nanomaterials have become crucial for fabricating novel photocatalysts due to their nanosheet architectures, large surface areas, and remarkable physicochemical properties. Furthermore, a variety of applications are possible with 2D nanomaterials, either in combination with other functional nanoparticles or by utilizing their inherent properties. Henceforth, the review commences its exploration into the synthesis of these materials, delving into their inherent properties and assessing their biocompatibility. Subsequently, an overview of mechanisms involved in the photocatalytic degradation of pollutants and the processes related to antimicrobial action is presented. As an integral part of our review, we conduct a systematic analysis of existing challenges and various types of 2D nanohybrid materials tailored for applications in the photocatalytic degradation of contaminants and the inactivation of pathogens through photocatalysis. This investigation will aid to contribute to the formulation of decision-making criteria and design principles for the next generation of 2D nanohybrid materials. Additionally, it is crucial to emphasize that further research is imperative for advancing our understanding of 2D nanohybrid materials.

Particle shape anisotropy in pickering interfacial catalysis for Knoevenagel condensation

Dispersions of two immiscible liquids stabilized by solid particles are termed as Pickering emulsions. Stability of such emulsions is affected by various parameters such as amount of solid particle, method of emulsification, size, and shape of particles, etc. In this study, MgO samples prepared by different methods and characterized by XRD, FESEM, HRTEM, DLS, and CO2-TPD techniques were utilized for stabilizing o/w Pickering emulsions. The effect of particle shape on Pickering Interfacial Catalysis (PIC) for Knoevenagel condensation was investigated. It was found that in the case of rod and plate shaped particles, emulsion stability and catalytic activity were higher as compared to those obtained with other MgO samples prepared. The applicability of the MgO-PIC system is also successfully demonstrated for gram scale synthesis (85 % yield in 30 min). The MgO-PIC system was found to be reusable for at least five cycles without substantial loss in activity.

Magnesium Oxide Nanoparticles: Effective Antilarvicidal and Antibacterial Agents

People are vulnerable to mosquito-borne infections in tropical and subtropical climate countries. Due to resistive issues, vector control is an immediate concern in today's environment. The current study describes the synthesis of magnesium oxide by four different approaches including green, microwave, sol-gel, and hydrothermal methods. The synthesized magnesium oxide (MgO) nanoparticles were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), high-resolution scanning electron microscopy (HRSEM), and energy-dispersive X-ray analysis (EDAX) techniques. The FT-IR studies reveal the presence of functional groups in the synthesized nanoparticles. The structural and morphological studies were investigated using XRD and HRSEM. EDAX reveals the presence of Mg and O in the prepared samples. The synthesized MgO NPs were screened for antibacterial studies against Gram-positive strains, Enterococcus faecalis and Staphylococcus aureus, two Gram-negative cultures, Escherichia coli and Klebsiella pneumoniae, using different concentrations. The results indicated excellent antibacterial activity against both Gram-positive and Gram-negative bacteria at 50 mg/mL hydrothermally produced MgO nanoparticles, with a maximal zone of inhibition (ZOI) of 5 mm for S. aureus, 7 mm for E. faecalis, and 6 mm for K. pneumoniae. The ZOI of E. coli was found to be the greatest at 9 mm when 50 mg/mL sol-gel-produced MgO nanoparticles were used. The synthesized MgO nanostructures were tested against fourth-instar larvae of Aedes aegypti and Aedes albopictus, and the hydrothermally synthesized MgO nanostructures exhibited better results when compared with other methods of synthesis. The reports show that A. aegypti and A. albopictus mortality rates were reported to be the lowest with green-manufactured MgO nanoparticles (7.5 g mL-1) and the highest with hydrothermally synthesized MgO nanoparticles (120 g mL-1). The research indicates that MgO nanostructures are promising drugs for antibacterial and mosquitocidal larvae control properties.

Converting Chrysotile Nanotubes into Magnesium Oxide and Hydroxide Using Lanthanum Oxycarbonate Hybridization and Alkaline Treatment for Efficient Phosphate Adsorption

Magnesium oxide and hydroxide nanomaterials comprise a class of promising advanced functional metal nanomaterials whose use in environmental and material applications is increasing. Several strategies to synthesize these nanomaterials have been described but are unsustainable and uneconomic. This work reports on a processing strategy that turns natural magnesium-rich chrysotile into magnesium oxide and hydroxide nanoparticles via nanoparticle hybridization and an alkaline process while enabling La-based nanoparticles to coat the chrysotile nanotube surfaces. The adsorbent's resulting hybrid nanostructure had an outstanding capacity for phosphate uptake (135.2 mg P g^-1) and enhanced regeneration performance. Furthermore, the adsorbent featured wide applicability with respect to the coexistence of competitive anions and a broad range of pH conditions, and its high-performance phosphate removal from sewage effluent was also demonstrated. Spectroscopic and microscopic analyses revealed the scavenging ability of phosphate by the La-based and Mg-based nanoparticles and the multiple capture mechanisms involved, including surface complexation and ion exchange. This proposed approach expands chrysotile's potential use as a magnesium-rich nanomaterial and harbors great promise for the removal of pollutants in a variety of real-world settings.

Enhanced Spontaneous Antibacterial Activity of δ-MnO2 by Alkali Metals Doping

Recently, the widespread use of antibiotics is becoming a serious worldwide public health challenge, which causes antimicrobial resistance and the occurrence of superbugs. In this context, MnO₂ has been proposed as an alternative approach to achieve target antibacterial properties on Streptococcus mutans (S. mutans). This requires a further understanding on how to control and optimize antibacterial properties in these systems. We address this challenge by synthesizing δ-MnO₂ nanoflowers doped by magnesium (Mg), sodium (Na), and potassium (K) ions, thus displaying different bandgaps, to evaluate the effect of doping on the bacterial viability of S. mutans. All these samples demonstrated antibacterial activity from the spontaneous generation of reactive oxygen species (ROS) without external illumination, where doped MnO₂ can provide free electrons to induce the production of ROS, resulting in the antibacterial activity. Furthermore, it was observed that δ-MnO₂ with narrower bandgap displayed a superior ability to inhibit bacteria. The enhancement is mainly attributed to the higher doping levels, which provided more free electrons to generate ROS for antibacterial effects. Moreover, we found that δ-MnO₂ was attractive for in vivo applications, because it could nearly be degraded into Mn ions completely following the gradual addition of vitamin C. We believe that our results may provide meaningful insights for the design of inorganic antibacterial nanomaterials.

High antioxidant activity of gadolinium-yttrium orthovanadate nanoparticles in cell-free and biological milieu

Oxidative stress caused by an overproduction of reactive oxygen species (ROS) is the key factor in developing a variety of pathological conditions. Recently various nanomaterials have attracted growing interest as nanoantioxidants with ROS-regulating ability. Here, for the first time, we report on high antioxidant behavior (enzyme-like activity) of GdYVO₄:Eu³⁺nanoparticles (GdYVO NPs) revealed by spectroscopic methods both in cell-free and biological milieu using various ROS sensors. It was revealed that GdYVO NPs (d= 2 nm) effectively scavenge hydroxyl radicals·OH,superoxide anionsO2·-,hydrogen peroxideH2O2,peroxyl radicalsROO·,and remarkably reduce the lipopolysaccharide-induced ROS generation in rat leukocytes. The antioxidant activity of GdYVO NPs is ascribed to high amount of V⁴⁺and V³⁺ions in the structure of the NPs and the reversible switchingV3+↔V4+andV4+↔V5+vanadium oxidation states.

Anti-aging Effects of Antioxidant Rare-Earth Orthovanadate Nanoparticles in Wistar Rats

Biomedical application of rare-earth-based nanoparticles attracts much attention due to their unique optical and redox properties and quite low toxicity. Earlier, we found age-related beneficial effects of rare-earth-based orthovanadate nanoparticles (OV NPs) on the prooxidant/antioxidant balance in liver and blood of Wistar rats, as reported by Nikitchenko et al. (Biol Trace Elem Res (2020). https://doi.org/10.1007/s12011-020-02196-7 ). However, the question remained unclear whether OV NPs' redox activity directly defines the protection ability. In the present work, antiradical, antioxidant, and membrane-protective properties of GdYVO₄/Eu³⁺ NPs (1-2 nm), GdVO₄/Eu³⁺ NPs (8 × 25 nm), LaVO₄/Eu³⁺ (57 × 8 nm) were assayed in a comparative manner in various model systems. All OV NPs demonstrated the protective properties, but extra-small GdYVO₄/Eu³⁺ NPs revealed the weakest antioxidant efficacy. In isolated mitochondria, OV NPs lowered (most evidently-extra-small NPs) respiration and oxidative phosphorylation, as well as ATP concentration. We conclude that not only the direct antioxidant effect but also slight suppression of bioenergetic processes by the OV NPs as well as the triggering of GSH-dependent antioxidant system may represent the principal mechanisms of their beneficial influences in an aged organism. This statement is consistent with improvement of the oxidative balance of 33-month-old rats due to prolonged administration of GdVO₄ /Eu³⁺ NPs (for 11 months) accompanied by retention of the GSH signaling of the old rats at the level of 12 months mature animals. Consequently, an increase of antioxidant defense upon prolonged usage of OV NPs will lead to oxidative balance stabilization increasing the health span and survival of an organism.

Prospective of biosynthesized L.satiVum oil/PEG/Ag-MgO bionanocomposite film for its antibacterial and anticancer potential

A substantial interest has been manifested in utilizing oil/metal oxide hybrid bionanocomposite, especially organic/ inorganic to design different biomedical applications. The present study reports the synthesis, characterization, antibacterial and anticancer properties of biogenic silver nanoparticles (AgNPs) and L.satiVum oil/PEG/Ag-MgO bionanocomposite. The fabricated AgNPs and L.sativum oil/PEG/Ag-MgO bionanocomposite were characterized by employing different spectroscopic (UV, FTIR, XRD) and microscopic (TEM, SEM) techniques. The particle size analysis showed that the mean size of 16.32 nm for AgNPS and 13.45 nm L.satiVum oil/PEG/Ag-MgO, indicating the excellent dispersion of Ag-MgO nanoparticles in the PEG- L.satiVum oil matrix. The antimicrobial activity of AgNPs and polymeric bionanocomposite was investigated against two pathogenic bacteria. The highest antibacterial effect was observed for bionanocomposite towards Gram-positive Staphylococcus aureus (27 mm) and Gram-negative Escherichia coli (25 mm) at 40 µg/well. The bionanocomposite completely vanished the bacterial growth (100%) at 80 µgmL-1 concentrations. Moreover, the AgNPs and polymeric bionanocomposite was evaluated for anticancer activity against human cervical cancer cells (HeLa cells) at different doses (50, 250, 500, and 1000 µgmL-1). The results showed polymeric bionanocomposite was stronger in inducing the HeLa cancer cell death than AgNPs. Overall, the fabricated L.satiVum oil/PEG/Ag-MgO bionanocomposite serve as a potential antimicrobial and anticancer agent and could be used in the development of novel drugs and health care products in near future.

Antipathogenic properties and applications of low-dimensional materials

A major health concern of the 21st century is the rise of multi-drug resistant pathogenic microbial species. Recent technological advancements have led to considerable opportunities for low-dimensional materials (LDMs) as potential next-generation antimicrobials. LDMs have demonstrated antimicrobial behaviour towards a variety of pathogenic bacterial and fungal cells, due to their unique physicochemical properties. This review provides a critical assessment of current LDMs that have exhibited antimicrobial behaviour and their mechanism of action. Future design considerations and constraints in deploying LDMs for antimicrobial applications are discussed. It is envisioned that this review will guide future design parameters for LDM-based antimicrobial applications.

Light-triggered redox activity of GdYVO4:Eu3+ nanoparticles

Light-triggered redox activity of small (d = 2 nm) GdYVO₄:Eu³⁺ nanoparticles (NPs) in aqueous solutions and lipid suspensions is reported. It has been revealed that depending on pre-treatment conditions (exposure to UV light or storage in the dark) the same NPs exhibit pro- or anti-oxidant properties. Pro-/anti-oxidant activity in aqueous solutions was evaluated by UV-vis spectroscopy using probe molecules for hydroxyl radicals (·OH) and superoxide anions (O₂^•-). Lipid oxidation under the effect of NPs has been also analyzed. Multi-functional GdYVO₄:Eu³⁺ NPs are assumed to be a new theranostic agent in cancer therapy, which exhibit fluorescent properties, triggered redox activity and drug-carrier ability.

A facile and universal strategy to endow implant materials with antibacterial ability via alkalinity disturbing bacterial respiration

Multifarious strategies have been proposed to enhance the antibacterial ability of implant surfaces for preventing bacterial infection, however, developing facile and universal modification methods still remains extremely elusive. Herein, inspired by the fact that the electron transfer respiratory chain of bacteria is embedded in the membrane, we proposed a novel strategy of local alkalinity disturbing bacterial respiration to endow implant materials with antibacterial ability. As a demonstration, MgO was deposited on biomedical titanium via magnetron sputtering to regulate surface alkalinity. With the thickness of MgO films increasing, they exhibited an excellent antibacterial rate against both Gram-negative and positive bacteria. The antibacterial mechanism confirmed that the alkaline surface can disturb the bacterial respiration action via weakening the transmembrane proton concentration gradient, resulting in the blockage of energy metabolism and the increase of oxidative stress of bacteria. Cell experiments indicated that MgO films not only have no obvious cytotoxicity to osteoblast cells, but can also selectively kill bacteria and promote cell proliferation in the presence of both bacteria and cells. More importantly, the by-product of MgO was only the biocompatible Mg2+, reducing any concerns about potential toxic effects. Furthermore, sputtering alkaline MgO films was confirmed to work well on polyetheretherketone polymer and zirconia ceramic implants, which indicates that this strategy has broad prospects of clinical application for preventing implant-associated bacterial infection.

Approaches to synthesize MgO nanostructures for diverse applications

Magnesium oxide remained interesting from long time for several important phenomena like; defect induced magnetism, spin electron reflectivity, broad laser emission etc. Moreover, nanostructures of this material exhibited suitability for different kinds of applications ranging from wastewater treatment to spintronics depending upon their shape and size. In this way, researchers had grown nanostructures in the form of nanoparticles, thin films, nanotubes, nanowalls, nanobelts. Though nanoparticles and thin films are well known form of nanostructures and wide variety of synthesis approaches are available, however, limited methodology for other nanostructures are available. In order to grow these nanostructures in an optimized way an understanding of these methods is essential. Thus, this review article depicts an overview of various approaches for design of different kinds of nanostructures.

Bioactive silver phosphate/polyindole nanocomposites

Materials capable of releasing reactive oxygen species (ROS) can display antibacterial and anticancer activity, and may also have anti-oxidant capacity if they suppress intracellular ROS (e.g. nitric oxide, NO) resulting in anti-inflammatory activity. Herein we report silver phosphate (Ag₃PO₄)/polyindole (Pln) nanocomposites which display antibacterial, anticancer and anti-inflammatory activity, and have therefore potential for a variety of biomedical applications.

Materials capable of releasing reactive oxygen species (ROS) can display antibacterial and anticancer activity, and may also have antioxidant capacity if they suppress intracellular ROS (e.g. nitric oxide, NO) resulting in anti-inflammatory activity.

Au nanoparticle-decorated aragonite microdumbbells for enhanced antibacterial and anticancer activities

The present work reports the very first hydrothermal synthesis of 100% triclinic phase pure aragonite (A1) with microdumbbell microstructural architecture and Au Nanoparticle-decorated (AuNP-decorated) aragonites (A2, A3 and A4) with spherical, pentagonal/hexagonal and agglomerated AuNP-decorated microdumbbells having triclinic aragonite phase as the major and cubic AuNPs as the minor phase. Even in dark the AuNP-decorated aragonites (especially A2) show efficacies as high 90% against gram-negative e.g., Pseudomonas putida (P. putida) bacteria. Further the AuNP-decorated aragonites (A3) show anti-biofilm capability of as high as about 20% against P. putida. Most importantly the AuNP-decorated aragonites (A3) offer anti-cancer efficacy of as high as 53% while those of A1, A2, and A4 are e.g., 26%, 46% and 37%, respectively. For the very first time, based on detailed investigations, the mechanisms behind such advance antibiofilm and anticancer activities are linked to the generation of excess labile toxic reactive oxygen species (ROS). Thus, these materials show enormous potential as futuristic, multi-functional biomaterials for anti-bacterial, anti-biofilm and anti-cancer applications.